/*********************************************************************
* @fn zclHomelink_Init
*
* @brief Initialization function for the zclGeneral layer.
*
* @param none
*
* @return none
*/
void zclHomelink_Init( byte task_id )
{
zclHomelink_UARTInit();
zclHomelink_TaskID = task_id;
// Set destination address to indirect for bindings
zclHomelink_BindDstAddr.addrMode = (afAddrMode_t)AddrNotPresent;
zclHomelink_BindDstAddr.endPoint = 0;
zclHomelink_BindDstAddr.addr.shortAddr = 0;
// This app is part of the Home Automation Profile
zclHA_Init( &zclHomelink_SimpleDesc[0] );
zclHA_Init( &zclHomelink_SimpleDesc[1] );
zclHA_Init( &zclHomelink_SimpleDesc[2] );
// Register the ZCL General Cluster Library callback functions
zclGeneral_RegisterCmdCallbacks( ENDPOINT, &zclHomelink_CmdCallbacks );
zclGeneral_RegisterCmdCallbacks( ENDPOINT+1, &zclHomelink_CmdCallbacks );
zclGeneral_RegisterCmdCallbacks( ENDPOINT+2, &zclHomelink_CmdCallbacks );
// Register the application's attribute list
zcl_registerAttrList( ENDPOINT, SAMPLESW_MAX_ATTRIBUTES, zclHomelink_Attrs );
zcl_registerAttrList( ENDPOINT+1, SAMPLESW_MAX_ATTRIBUTES, zclHomelink_Attrs );
zcl_registerAttrList( ENDPOINT+2, SAMPLESW_MAX_ATTRIBUTES, zclHomelink_Attrs );
// Register the Application to receive the unprocessed Foundation command/response messages
zcl_registerForMsg( zclHomelink_TaskID );
// Register for all key events - This app will handle all key events
RegisterForKeys( zclHomelink_TaskID );
ZDO_RegisterForZDOMsg( zclHomelink_TaskID, End_Device_Bind_rsp );
ZDO_RegisterForZDOMsg( zclHomelink_TaskID, Match_Desc_rsp );
}
/*********************************************************************
* @fn zclSampleSw_Init
*
* @brief Initialization function for the zclGeneral layer.
*
* @param none
*
* @return none
*/
void zclSampleSw_Init( byte task_id )
{
osal_nv_write(ZCD_NV_EXTADDR, 0, Z_EXTADDR_LEN, ieeeAddr);
zclSampleSw_TaskID = task_id;
// Set destination address to indirect
zclSampleSw_DstAddr.addrMode = (afAddrMode_t)AddrNotPresent;
zclSampleSw_DstAddr.endPoint = 0;
zclSampleSw_DstAddr.addr.shortAddr = 0;
// This app is part of the Home Automation Profile
zclHA_Init( &zclSampleSw_SimpleDesc );
// Register the ZCL General Cluster Library callback functions
zclGeneral_RegisterCmdCallbacks( SAMPLESW_ENDPOINT, &zclSampleSw_CmdCallbacks );
// Register the application's attribute list
zcl_registerAttrList( SAMPLESW_ENDPOINT, SAMPLESW_MAX_ATTRIBUTES, zclSampleSw_Attrs );
// Register the Application to receive the unprocessed Foundation command/response messages
zcl_registerForMsg( zclSampleSw_TaskID );
// Register for all key events - This app will handle all key events
RegisterForKeys( zclSampleSw_TaskID );
// Register for a test endpoint
afRegister( &sampleSw_TestEp );
ZDO_RegisterForZDOMsg( zclSampleSw_TaskID, End_Device_Bind_rsp );
ZDO_RegisterForZDOMsg( zclSampleSw_TaskID, Match_Desc_rsp );
}
/*********************************************************************
* @fn zclSampleLight_Init
*
* @brief Initialization function for the zclGeneral layer.
*
* @param none
*
* @return none
*/
void zclSampleLight_Init( byte task_id )
{
zclSampleLight_TaskID = task_id;
// Set destination address to indirect
//zclSampleLight_DstAddr.addrMode = (afAddrMode_t)AddrNotPresent;
//zclSampleLight_DstAddr.endPoint = 0;
//zclSampleLight_DstAddr.addr.shortAddr = 0;
// This app is part of the Home Automation Profile
zclHA_Init( &zclSampleLight_SimpleDesc );
// Register the ZCL General Cluster Library callback functions
zclGeneral_RegisterCmdCallbacks( SAMPLELIGHT_ENDPOINT, &zclSampleLight_CmdCallbacks );
// Register the application's attribute list
zcl_registerAttrList( SAMPLELIGHT_ENDPOINT, SAMPLELIGHT_MAX_ATTRIBUTES, zclSampleLight_Attrs );
// Register the Application to receive the unprocessed Foundation command/response messages
zcl_registerForMsg( zclSampleLight_TaskID );
// Register for all key events - This app will handle all key events
RegisterForKeys( zclSampleLight_TaskID );
// Register for a test endpoint
afRegister( &sampleLight_TestEp );
}
/*********************************************************************
* @fn zclSampleSw_Init
*
* @brief Initialization function for the zclGeneral layer.
*
* @param none
*
* @return none
*/
void zclSampleSw_Init( byte task_id )
{
zclSampleSw_TaskID = task_id;
#ifdef ZCL_ON_OFF
// Set destination address to indirect
zclSampleSw_DstAddr.addrMode = (afAddrMode_t)AddrNotPresent;
zclSampleSw_DstAddr.endPoint = 0;
zclSampleSw_DstAddr.addr.shortAddr = 0;
#endif
// This app is part of the Home Automation Profile
zclHA_Init( &zclSampleSw_SimpleDesc );
// Register the ZCL General Cluster Library callback functions
zclGeneral_RegisterCmdCallbacks( SAMPLESW_ENDPOINT, &zclSampleSw_CmdCallbacks );
// Register the application's attribute list
zcl_registerAttrList( SAMPLESW_ENDPOINT, SAMPLESW_MAX_ATTRIBUTES, zclSampleSw_Attrs );
// Register the Application to receive the unprocessed Foundation command/response messages
zcl_registerForMsg( zclSampleSw_TaskID );
#ifdef ZCL_EZMODE
// Register EZ-Mode
zcl_RegisterEZMode( &zclSampleSw_RegisterEZModeData );
// Register with the ZDO to receive Match Descriptor Responses
ZDO_RegisterForZDOMsg(task_id, Match_Desc_rsp);
#endif
// Register for all key events - This app will handle all key events
RegisterForKeys( zclSampleSw_TaskID );
// Register for a test endpoint
afRegister( &sampleSw_TestEp );
ZDO_RegisterForZDOMsg( zclSampleSw_TaskID, End_Device_Bind_rsp );
ZDO_RegisterForZDOMsg( zclSampleSw_TaskID, Match_Desc_rsp );
#ifdef LCD_SUPPORTED
HalLcdWriteString ( (char *)sDeviceName, HAL_LCD_LINE_3 );
#endif
#if defined (OTA_CLIENT) && (OTA_CLIENT == TRUE)
// Register for callback events from the ZCL OTA
zclOTA_Register(zclSampleSw_TaskID);
#endif
}
/*********************************************************************
* @fn zclRouterVersion1_Init
*
* @brief Initialization function for the zclGeneral layer.
*
* @param none
*
* @return none
*/
void zclRouterVersion1_Init( byte task_id )
{
zclRouterVersion1_TaskID = task_id;
// Set destination address to indirect
zclRouterVersion1_DstAddr.addrMode = (afAddrMode_t)Addr16Bit;
zclRouterVersion1_DstAddr.endPoint = 2;
zclRouterVersion1_DstAddr.addr.shortAddr = 0x0000;
// This app is part of the Home Automation Profile
zclHA_Init( &zclRouterVersion1_SimpleDesc );
// Register the ZCL General Cluster Library callback functions
zclGeneral_RegisterCmdCallbacks( ROUTERVERSION1_ENDPOINT, &zclRouterVersion1_CmdCallbacks );
// Register the application's attribute list
zcl_registerAttrList( ROUTERVERSION1_ENDPOINT, zclRouterVersion1_NumAttributes, zclRouterVersion1_Attrs );
// Register the Application to receive the unprocessed Foundation command/response messages
zcl_registerForMsg( zclRouterVersion1_TaskID );
// Register for all key events - This app will handle all key events
RegisterForKeys( zclRouterVersion1_TaskID );
// Register for a test endpoint
afRegister( &sampleLight_TestEp );
ZDO_RegisterForZDOMsg(task_id, Device_annce);
osal_start_timerEx(zclRouterVersion1_TaskID, SET_PARAMETER, 1000);
HAL_CONFIG_IO_OUTPUT(1,2,0);
HAL_CONFIG_IO_OUTPUT(1,3,0);
HAL_CONFIG_IO_OUTPUT(0,0,0);
HAL_CONFIG_IO_OUTPUT(0,1,0);
HAL_CONFIG_IO_OUTPUT(0,2,0);
HAL_CONFIG_IO_OUTPUT(0,3,0);
HAL_CONFIG_IO_OUTPUT(0,4,0);
HAL_CONFIG_IO_OUTPUT(0,7,0);
HalLedSet(HAL_LED_1,HAL_LED_MODE_OFF);
HalLedSet(HAL_LED_2,HAL_LED_MODE_OFF);
//ZDOInitDevice(0);
if (ZDApp_ReadNetworkRestoreState() == 0) {
ZDOInitDevice(0);
}
}
void AT_ZCL_ONOFF_SWITCH_Init( byte task_id )
{
AT_ZCL_ONOFF_SWITCH_TaskID = task_id;
// This app is part of the Home Automation Profile
zclHA_Init( &AT_ZCL_ONOFF_SWITCH_SimpleDesc );
// Register the ZCL General Cluster Library callback functions
zclGeneral_RegisterCmdCallbacks( AT_ZCL_ONOFF_SWITCH_ENDPOINT, &AT_ZCL_ONOFF_SWITCH_GEN_CmdCallbacks );
// Register the application's attribute list
zcl_registerAttrList( AT_ZCL_ONOFF_SWITCH_ENDPOINT, AT_ZCL_ONOFF_SWITCH_MAX_ATTRIBUTES, AT_ZCL_ONOFF_SWITCH_Attrs );
//register for AT command system enable/disable call back function
AT_ZCL_EP_ENABLE_Register( AT_ZCL_ONOFF_SWITCH_ENDPOINT,AT_ZCL_ONOFF_SWITCH_EP_ENABLE);
//initialize the switch device
switch_init();
}
/*********************************************************************
* @fn zclSampleTemperatureSensor_Init
*
* @brief Initialization function for the zclGeneral layer.
*
* @param none
*
* @return none
*/
void zclSampleTemperatureSensor_Init( byte task_id )
{
zclSampleTemperatureSensor_TaskID = task_id;
// Set destination address to indirect
zclSampleTemperatureSensor_DstAddr.addrMode = (afAddrMode_t)AddrNotPresent;
zclSampleTemperatureSensor_DstAddr.endPoint = 0;
zclSampleTemperatureSensor_DstAddr.addr.shortAddr = 0;
// This app is part of the Home Automation Profile
zclHA_Init( &zclSampleTemperatureSensor_SimpleDesc );
// Register the ZCL General Cluster Library callback functions
zclGeneral_RegisterCmdCallbacks( SAMPLETEMPERATURESENSOR_ENDPOINT, &zclSampleTemperatureSensor_CmdCallbacks );
// Register the application's attribute list
zcl_registerAttrList( SAMPLETEMPERATURESENSOR_ENDPOINT, SAMPLETEMPERATURESENSOR_MAX_ATTRIBUTES, zclSampleTemperatureSensor_Attrs );
// Register the Application to receive the unprocessed Foundation command/response messages
zcl_registerForMsg( zclSampleTemperatureSensor_TaskID );
#ifdef ZCL_EZMODE
// Register EZ-Mode
zcl_RegisterEZMode( &zclSampleTemperatureSensor_RegisterEZModeData );
// Register with the ZDO to receive Match Descriptor Responses
ZDO_RegisterForZDOMsg(task_id, Match_Desc_rsp);
#endif
// Register for all key events - This app will handle all key events
RegisterForKeys( zclSampleTemperatureSensor_TaskID );
// Register for a test endpoint
afRegister( &sampleTemperatureSensor_TestEp );
#ifdef LCD_SUPPORTED
// display the device name
HalLcdWriteString( (char *)sDeviceName, HAL_LCD_LINE_3 );
#endif
}
void zclEnergyHarvester_Init( byte task_id ) {
zclEnergyHarvester_TaskID = task_id;
// This app is part of the Home Automation Profile
zclHA_Init( &zclSampleLight_SimpleDesc );
// Register for a test endpoint
afRegister( &testEp );
zcl_registerPlugin( ZCL_CLUSTER_ID_MS_ILLUMINANCE_MEASUREMENT,
ZCL_CLUSTER_ID_MS_ALL,
zclEnergyHarvester_HdlIncoming );
ZDO_RegisterForZDOMsg( zclEnergyHarvester_TaskID, End_Device_Bind_rsp );
#if DEV_TYPE == COORDINATOR
ZDO_RegisterForZDOMsg( zclEnergyHarvester_TaskID, Device_annce );
#else
adc_Init();
// Configure signal from off-chip timer to be wake-up signal
GPIODirModeSet( GPIO_B_BASE, GPIO_PIN_3 , GPIO_DIR_MODE_IN );
// Configure deep sleep in power mode 3, woken up by off-chip timer
SysCtrlDeepSleepSetting();
SysCtrlPowerModeSet( SYS_CTRL_PM_3 );
GPIODirModeSet( GPIO_B_BASE, GPIO_PIN_4 , GPIO_DIR_MODE_IN );
HWREG( SYS_CTRL_IWE ) = 0x02;
GPIOPowIntTypeSet( GPIO_B_BASE, GPIO_PIN_4, GPIO_POW_RISING_EDGE );
GPIOPowIntClear( GPIO_B_BASE, GPIO_PIN_4 );
GPIOPowIntEnable( GPIO_B_BASE, GPIO_PIN_4 );
// Done with off-chip timer acknowledge
GPIOPinWrite( GPIO_B_BASE, GPIO_PIN_5, GPIO_PIN_5 );
#endif
}
