void setup(void)
{
Serial.begin(9600);
Serial.println("Setup..");
// The ADC input range (or gain) can be changed via the following
// functions, but be careful NEVER TO EXCEED +0.3V OVER VDD ON GAINED INPUTS,
// or exceed the upper and lower limits if you adjust the input range!
// Setting these values incorrectly may DESTROY your ADC!
//
// *** TAKE CARE WHEN SETTING GAIN TO NOT EXCEED ABOVE LIMITS ON INPUT!!
// ADS1015 ADS1115
// ------- -------
ads.setGain(GAIN_TWOTHIRDS); // 2/3x gain +/- 6.144V 1 bit = 3mV 0.1875mV (DEFAULT)
// ads.setGain(GAIN_ONE); // 1x gain +/- 4.096V 1 bit = 2mV 0.125mV
// ads.setGain(GAIN_TWO); // 2x gain +/- 2.048V 1 bit = 1mV 0.0625mV
// ads.setGain(GAIN_FOUR); // 4x gain +/- 1.024V 1 bit = 0.5mV 0.03125mV
// ads.setGain(GAIN_EIGHT); // 8x gain +/- 0.512V 1 bit = 0.25mV 0.015625mV
// ads.setGain(GAIN_SIXTEEN); // 16x gain +/- 0.256V 1 bit = 0.125mV 0.0078125mV
ads.begin();
Serial.println("Getting differential reading from AIN0 (Positive) and AIN1 (Negative)");
Serial.println("ADC Range: +/- 6.144V (1 bit = 0.1875mV for ADS1115)");
}
void setupADS() {
ads.begin();
ads.setGain(GAIN_ONE);
ads.setSPS(ADS1115_DR_64SPS);
}
void gc_dev_batt_open(void){
adc.begin();
}
