void setup() {
//Check for current EEPROM data
if(EEPROM.read(0) == 117) {
EEPROM.get(1, preferences);
} else {
preferences = {-8, 1000, -1, -1, -1, -1, -1.0, -1.0, -1.0, "US"};
EEPROM.put(1, preferences);
EEPROM.put(0, 117);
}
//Update settings according to EEPROM data
if(preferences.DSTRule == "US") {
DSTJumpHour = 2;
} else if(preferences.DSTRule == "EU") {
DSTJumpHour = 1 + preferences.timeZone;
} else {
DSTJumpHour = 0;
}
dataSyncFrequency = preferences.dataSyncFrequency;
lightCycleLength = preferences.lightCycleLength;
waterCycleLength = preferences.waterCycleLength;
targetTemperature = preferences.targetTemperature;
targetHumidity = preferences.targetHumidity;
targetSoilMoisture = preferences.targetSoilMoisture;
//Set the proper time zone according to DST status
Time.zone(isDST(Time.day(), Time.month(), Time.weekday(), preferences.DSTRule) ? preferences.timeZone + 1 : preferences.timeZone);
//Setup sensors
tempHumidSensor.begin();
lightSensor.begin();
lightSensor.setGain(TSL2591_GAIN_MED);
lightSensor.setTiming(TSL2591_INTEGRATIONTIME_100MS);
pinMode(pumpPWMPin, OUTPUT);
pinMode(pumpIn1Pin, OUTPUT);
pinMode(pumpIn2Pin, OUTPUT);
pinMode(growLEDPin, OUTPUT);
pinMode(socketPin, OUTPUT);
pinMode(fanPin, OUTPUT);
//TEST ONLY
lightCycleStartHour = Time.hour();
lightCycleStartMinute = Time.minute()+1;
lightCycleLength = 1 * 60 * 1000;
}
void configureTLS2591(void)
{
// You can change the gain on the fly, to adapt to brighter/dimmer light situations
//tsl.setGain(TSL2591_GAIN_LOW); // 1x gain (bright light)
tsl.setGain(TSL2591_GAIN_MED); // 25x gain
//tsl.setGain(TSL2591_GAIN_HIGH); // 428x gain
// Changing the integration time gives you a longer time over which to sense light
// longer timelines are slower, but are good in very low light situtations!
//tsl.setTiming(TSL2591_INTEGRATIONTIME_100MS); // shortest integration time (bright light)
// tsl.setTiming(TSL2591_INTEGRATIONTIME_200MS);
tsl.setTiming(TSL2591_INTEGRATIONTIME_300MS);
// tsl.setTiming(TSL2591_INTEGRATIONTIME_400MS);
// tsl.setTiming(TSL2591_INTEGRATIONTIME_500MS);
// tsl.setTiming(TSL2591_INTEGRATIONTIME_600MS); // longest integration time (dim light)
/* Display the gain and integration time for reference sake */
Serial.println(F("------------------------------------"));
Serial.print (F("Gain: "));
tsl2591Gain_t gain = tsl.getGain();
switch(gain)
{
case TSL2591_GAIN_LOW:
Serial.println(F("1x (Low)"));
break;
case TSL2591_GAIN_MED:
Serial.println(F("25x (Medium)"));
break;
case TSL2591_GAIN_HIGH:
Serial.println(F("428x (High)"));
break;
case TSL2591_GAIN_MAX:
Serial.println(F("9876x (Max)"));
break;
}
Serial.print (F("Timing: "));
Serial.print((tsl.getTiming() + 1) * 100, DEC);
Serial.println(F(" ms"));
Serial.println(F("------------------------------------"));
Serial.println(F(""));
}
