AliAnalysisGrid *AnalysisConfig(TString analysisMode,
const char *aliphyiscsVersion,
const char *alirootVersion,
const char *rootVersion) {
AliAnalysisAlien *plugin = new AliAnalysisAlien();
// Setting software versions
plugin->SetROOTVersion(rootVersion);
plugin->SetAliROOTVersion(alirootVersion);
plugin->SetAliPhysicsVersion(aliphyiscsVersion);
// Overwrite all generated files, datasets and output results from a previous
// session
plugin->SetOverwriteMode();
// Set the run mode (can be "full", "test", "offline", "submit" or
// "terminate")
plugin->SetRunMode(analysisMode.Data()); // VERY IMPORTANT - DECRIBED BELOW
// adds Proof setting
MySetupAnalysisPluginProof(plugin, analysisMode);
// adds AliEn settings
MySetupAnalysisPluginAliEn(plugin);
return plugin;
}
AliAnalysisAlien *CreateGridHandler(){
//
// Setup main settings of the Alien plugin
//
AliAnalysisAlien *plugin = new AliAnalysisAlien();
plugin->SetRunMode(g_plugin_mode.Data());
if(!g_plugin_mode.CompareTo("Terminate"))
plugin->SetMergeViaJDL(kFALSE);
else
plugin->SetMergeViaJDL(kTRUE);
plugin->SetOverwriteMode();
plugin->SetNtestFiles(1);
plugin->SetAPIVersion("V1.1x");
plugin->SetROOTVersion(g_root_version.Data());
plugin->SetAliROOTVersion(g_aliroot_version.Data());
plugin->SetOutputToRunNo();
plugin->AddIncludePath("-I. .I$ALIEN_ROOT/api/lib -I$ROOTSYS/lib -I$ROOTSYS/include -I$ALICE_ROOT/include -I$ALICE_ROOT/PWGHF/ -I$ALICE_ROOT/PWGHF/hfe/macros -I$ALICE_ROOT/PWGHF/hfe -I$ALICE_ROOT/ANALYSIS -I$ALICE_ROOT/TENDER/Tender -I$ALICE_ROOT/TENDER/TenderSupplies -I$ALICE_ROOT/PWG/ -I$ALICE_ROOT/PWG/FLOW -I$ALICE_ROOT/PWG/Base -I$ALICE_ROOT/PWG/Tasks");
plugin->SetAdditionalLibs("libGui.so libXMLParser.so libSTEERBase.so libESD.so libAOD.so libCDB.so libANALYSIS.so libANALYSISalice.so libCORRFW.so libPWGflowBase.so libPWGflowTasks.so libPWGHFhfe.so libTender.so libProof.so libRAWDatabase.so libSTEER.so libTOFbase.so libPWGTRD.so");
plugin->SetDefaultOutputs(kFALSE);
plugin->SetOutputFiles("AnalysisResults.root");
plugin->SetExecutableCommand("aliroot -b -q");
plugin->SetTTL(30000);
plugin->SetInputFormat("xml-single");
plugin->SetPrice(1);
plugin->SetSplitMode("se");
return plugin;
}
AliAnalysisGrid* CreateAlienHandler(TString mode="test",TString fname="testName"){
AliAnalysisAlien *plugin = new AliAnalysisAlien();
plugin->SetOverwriteMode();
plugin->SetExecutableCommand("aliroot -q -b");
plugin->SetRunMode(mode.Data());
plugin->SetNtestFiles(20);
// Set versions of used packages
plugin->SetAPIVersion("V1.1x");
//plugin->SetROOTVersion("v5-34-26");
plugin->SetAliROOTVersion("v5-07-20");
plugin->SetAliPhysicsVersion("vAN-20160203");
// Declare input data to be processed.
plugin->SetNrunsPerMaster(100);
plugin->SetSplitMaxInputFileNumber(15); // 3 in the LEGO trains
plugin->SetGridDataDir("/alice/data/2013/LHC13c/");
plugin->SetGridWorkingDir(Form("%s/",fname.Data()));
plugin->SetRunPrefix("000");
plugin->SetDataPattern("/ESDs/pass2/*/AliESDs.root");
plugin->SetAnalysisMacro("TaskDeuteronTreeTest.C");
plugin->SetExecutable("TaskDeuteronTreeTest.sh");
plugin->SetJDLName("TaskDeuteronTreeTest.jdl");
Int_t runnumbers[]={195596,195592};
for(Int_t irun=0;irun<2;irun++){
Printf("%d %d",irun,runnumbers[irun]);
plugin->AddRunNumber(runnumbers[irun]);
}
TString extraLibs;
plugin->AddIncludePath("-I. -I$ROOTSYS/include -I$ALICE_ROOT/include -I$ALICE_PHYSICS/include");
//plugin->SetAdditionalLibs("libCORRFW.so libPWGTools.so libPWGCFCorrelationsBase.so libPWGCFCorrelationsDPhi.so AliAnalysisTaskPhiCorrelations.cxx AliAnalysisTaskPhiCorrelations.h");
//plugin->SetAnalysisSource("AliAnalysisTaskPhiCorrelations.cxx");
plugin->SetGridOutputDir("output"); // In this case will be $HOME/work/output
// Declare the output file names separated by blancs.
// (can be like: file.root or file.root@ALICE::Niham::File)
//plugin->SetDefaultOutputs(0);
//plugin->SetOutputFiles("AnalysisResults.root.root");
plugin->SetMergeViaJDL(kTRUE);
plugin->SetOneStageMerging(kFALSE);
//plugin->SetMaxMergeFiles(40);
//plugin->SetMaxMergeStages(4);
plugin->SetTTL(50000);
// Optionally set input format (default xml-single)
plugin->SetInputFormat("xml-single");
// Optionally modify job price (default 1)
plugin->SetPrice(1);
// Optionally modify split mode (default 'se')
//plugin->SetSplitMaxInputFileNumber();
plugin->SetSplitMode("se");
return plugin;
}
AliAnalysisGrid *CreateAlienHandler()
{
AliAnalysisAlien *plugin = new AliAnalysisAlien();
//plugin->SetOverwriteMode();
// Set the run mode (can be "full", "test", "offline", "submit" or "terminate")
//plugin->SetRunMode("test");
plugin->SetRunMode("full");
//plugin->SetRunMode("terminate");
// Set versions of used packages
plugin->SetAPIVersion("V1.1x");
plugin->SetROOTVersion("v5-34-08-6");
plugin->SetAliROOTVersion("vAN-20141031");
// Set the path for finding the data
plugin->SetGridDataDir("/alice/data/2010/LHC10h/");
plugin->SetDataPattern("ESDs/pass2/AOD086/*/AliAOD.root"); // for testing over multiple files
//plugin->SetDataPattern("ESDs/pass2/AOD086/0001/AliAOD.root"); // for testing over a single file
plugin->SetRunPrefix("000");
//plugin->AddRunNumber(137161);
gROOT->ProcessLine(".L AddRunNumbers.C");
int added = AddRunNumbers(plugin,0,95,"lhc10h");
if(added<0) return NULL;
// Set the path for the output
plugin->SetGridWorkingDir("TaskExample"); // $HOME/TaskExample
plugin->SetGridOutputDir("OutputTesting_X005"); // $HOME/TaskExample/OutputTesting
// Specify the source code for the analysis
plugin->SetAnalysisSource("AliAnalysisTaskExample.cxx"); // class file
plugin->SetAdditionalLibs("AliAnalysisTaskExample.h AliAnalysisTaskExample.cxx"); // header space class
// Default outputs (?)
plugin->SetDefaultOutputs(); // ALWAYS use default outputs, code warns then crashes if not
// The rest of these are optional, though some are very useful
plugin->SetSplitMaxInputFileNumber(100); // default 100 input files/subjob
plugin->SetMaxInitFailed(5); // default (?) jobs fail to kill waiting subjobs
plugin->SetMasterResubmitThreshold(90); // default (?) resubmit threshold
plugin->SetTTL(50000); // default 30000 sec time to live
plugin->SetAnalysisMacro("TaskExample.C"); // default "MyAnalysis.C"
plugin->SetExecutable("TaskExample.sh"); // default "analysis.sh"
plugin->SetJDLName("TaskExample.jdl"); // default "analysis.jdl"
plugin->SetInputFormat("xml-single"); // default "xml-single"
plugin->SetPrice(1); // default 1 price to modify job
plugin->SetSplitMode("se"); // default "se"
return plugin;
}
// ======================================
// ===== ALIEN PLUGIN CONFIGURATION =====
// ======================================
//
// This macro configures an AliEn plugin in order to launch a job
// which runs a task from the resonance package on a list of runs
// which are processed separately.
//
// All the possible configuration parameters are arguments
// of the macro function, even if most of them have default
// values which the user will rarely change.
//
// The macro tries to synchronize some output names, using
// a unique name ('analysisName') to define all files that
// describe the output, the analysis macros/executables/JDL.
//
// Since the run mode can be more variable than the config
// it is not set here, but it is required in the run macro
// which uses the plugin.
//
// Considered that the arguments are many, they are explained
// inside the list of arguments in the macro definition.
// In ALL cases where a list of strings must be provided, its
// elements must be separated by a blank character.
//
AliAnalysisAlien* PluginByRunProof
(
// all parameters which could often be customized
// are placed at the beginning of the macro, while
// all others can stay there with their default values:
// -- analysisName --> common name used for naming all analysis related files
// -- dataset --> dataset to be processed
// -- testFile --> used for test mode only
// -- clusterName --> PROOF cluster to be used
const char *dataSet,
const char *testFile,
const char *clusterName,
// -- proofReset --> require or not the PROOF reset
// -- alirootMode --> the way AliROOT library are loaded
// -- clearPack --> to clear or not the PAR libraries
Bool_t proofReset = kFALSE,
const char *alirootMode = "default",
Bool_t clearPack = kFALSE,
// standard package versions
const char *rootVersion = "v5-28-00a",
const char *aliVersion = "v4-21-17a-AN"
)
{
// create plugin object
// with specifications which apply to a run-by-run execution
// this creates by default also the job structure for merging
AliAnalysisAlien *plugin = new AliAnalysisAlien;
// package versions
plugin->SetROOTVersion(rootVersion);
plugin->SetAliROOTVersion(aliVersion);
// additional libraries/includes
//plugin->SetAdditionalLibs("libTENDER.so TENDERSupplies.par libEventMixing.so libPWG2resonances.so");
plugin->SetAdditionalLibs("libEventMixing.so PWG2resonances.par");
// PROOF-specific settings
plugin->SetProofCluster(clusterName);
plugin->SetProofDataSet(dataSet);
plugin->SetProofReset(proofReset);
plugin->SetProofConnectGrid(kTRUE);
plugin->SetAliRootMode(alirootMode);
plugin->SetClearPackages(clearPack);
plugin->SetFileForTestMode(testFile);
// the end!
return plugin;
}
//___________________________________________________________
AliAnalysisAlien *CreateAlienHandler(Bool_t isProof){
//if(!AliAnalysisGrid::CreateToken()) return NULL;
if(!FindDependentPackages()) return NULL;
AliAnalysisAlien *alienplugin = new AliAnalysisAlien;
// common settings
alienplugin->SetAliROOTVersion(aliroot_version);
alienplugin->SetROOTVersion(root_version);
alienplugin->SetAPIVersion(api_version);
alienplugin->SetAdditionalLibs("libPWGHFhfe.so");
alienplugin->SetDefaultOutputs(kTRUE);
if(isProof){
// proof mode
if(analysis_mode.Contains("test")) alienplugin->SetRunMode("test");
alienplugin->SetProofCluster("alice_caf.cern.ch");
alienplugin->SetRootVersionForProof(root_version);
alienplugin->SetAliRootMode("aliroot");
} else {
// grid mode
alienplugin->SetRunMode(analysis_mode.Data());
// default setting that need no deeper logic
alienplugin->SetJDLName("hfeanalysis.jdl");
alienplugin->SetExecutable("hfeanalysis.sh");
alienplugin->SetAnalysisMacro("hfeanalysis.C");
alienplugin->SetValidationScript("hfevalidate.sh");
alienplugin->SetGridWorkingDir("hfeanalysis");
/*alienplugin->SetOutputArchive();
alienplugin->SetDefaultOutputs();*/
alienplugin->SetOverwriteMode();
alienplugin->SetFastReadOption();
alienplugin->SetSplitMaxInputFileNumber(5);
alienplugin->SetTTL(30000);
alienplugin->SetInputFormat("xml-single");
alienplugin->SetPrice(1);
alienplugin->SetSplitMode("se");
alienplugin->SetNtestFiles(1);
// Merging setting, only needed in terminate or full mode
if(analysis_mode.Contains("full") || analysis_mode.Contains("terminate")){
alienplugin->SetMergeViaJDL();
alienplugin->SetMaxMergeFiles(50);
alienplugin->SetMaxMergeStages(5);
}
}
return alienplugin;
}
//_______________________________| CreateAlienHandler |________________________________
AliAnalysisGrid* CreateAlienHandler()
{
AliAnalysisAlien *Plugin = new AliAnalysisAlien();
Plugin->SetRunMode(fPluginMode.Data());
Plugin->SetUser(fUsername.Data());
Plugin->SetAPIVersion("V1.1x");
Plugin->SetROOTVersion("v5-34-30-alice-12");
Plugin->SetAliROOTVersion("v5-07-20-4");
Plugin->SetAliPhysicsVersion("vAN-20160129-1");
Plugin->SetNtestFiles(1);
Plugin->SetFileForTestMode(TestFilesWPlugin.Data());
// Set data search pattern for DATA grid Mode
Plugin->SetGridDataDir("/alice/sim/2013/LHC13b2_efix_p1"); // specify MC sample
if(readAOD) Plugin->SetDataPattern("AOD/*AliAOD.root");// specify AOD set
else Plugin->SetDataPattern("*/AliESDs.root");
Int_t totruns=0;
//gROOT->LoadMacro("$ALICE_PHYSICS/PWGHF/vertexingHF/AddGoodRuns.C");
gROOT->LoadMacro("AddGoodRuns.C");
totruns += AddGoodRuns(Plugin,"LHC13b","LHC13b2_efix_p1"); //Set accordingly
Plugin->SetNrunsPerMaster(totruns);
Plugin->SetGridWorkingDir("SingleTrkEff/LHC13b2_efix_p1/16Feb2016/");
Plugin->SetGridOutputDir("out");
Plugin->SetExecutable("STE16Feb2016.sh");
Plugin->AddIncludePath("-I. -I$ROOTSYS/include -I$ALICE_PHYSICS -I$ALICE_PHYSICS/include -I$ALICE_PHYSICS/ITS -I$ALICE_PHYSICS/TPC -I$ALICE_PHYSICS/CONTAINERS -I$ALICE_PHYSICS/STEER/STEER -I$ALICE_PHYSICS/STEER/STEERBase -I$ALICE_PHYSICS/STEER/ESD -I$ALICE_PHYSICS/STEER/AOD -I$ALICE_PHYSICS/TRD -I$ALICE_PHYSICS/macros -I$ALICE_PHYSICS/ANALYSIS -I$ALICE_PHYSICS/OADB -g");
Plugin->SetSplitMaxInputFileNumber(5);
Plugin->SetDefaultOutputs(kTRUE);
Plugin->SetMergeViaJDL(kTRUE); // Merge Via JDL
Plugin->SetOneStageMerging(kFALSE);
Plugin->SetMaxMergeStages(2);
Plugin->SetAnalysisMacro("STE16Feb2016.C");
Plugin->SetJDLName("STE16Feb2016.jdl");
return Plugin;
}
AliAnalysisGrid* runWithHandler()
{
// Check if user has a valid token, otherwise make one. This has limitations.
if (!AliAnalysisGrid::CreateToken()) return NULL;
AliAnalysisAlien *plugin = new AliAnalysisAlien();
// Set the run mode (can be "full", "test", "offline", "submit" or "terminate")
plugin->SetRunMode("full");
// Set versions of used packages
plugin->SetAPIVersion("V1.1x");
plugin->SetROOTVersion("v5-26-00b-2");
plugin->SetAliROOTVersion("v4-19-10-AN");
// Declare input data to be processed.
// Method 1: Create automatically XML collections using alien 'find' command.
// Define production directory LFN
//plugin->SetGridDataDir("/alice/sim/LHC10a6");
// On real reconstructed data:
plugin->SetGridDataDir("/alice/data/2009/LHC09d");
// Set data search pattern
//plugin->SetDataPattern("*ESDs.root");
// Data pattern for reconstructed data
plugin->SetDataPattern("*ESDs/pass4/*ESDs.root");
plugin->SetRunPrefix("000"); // real data
// ...then add run numbers to be considered
plugin->AddRunNumber(104824);
// plugin->AddRunNumber(104065); // real data
// plugin->SetOutputSingleFolder("output");
// plugin->SetOutputToRunNo();
// Method 2: Declare existing data files (raw collections, xml collections, root file)
// If no path mentioned data is supposed to be in the work directory (see SetGridWorkingDir())
// XML collections added via this method can be combined with the first method if
// the content is compatible (using or not tags)
// plugin->AddDataFile("tag.xml");
// plugin->AddDataFile("/alice/data/2008/LHC08c/000057657/raw/Run57657.Merged.RAW.tag.root");
// Define alien work directory where all files will be copied. Relative to alien $HOME.
plugin->SetGridWorkingDir("TrackletsTask");
// Declare alien output directory. Relative to working directory.
plugin->SetGridOutputDir("output"); // In this case will be $HOME/work/output
// Declare the analysis source files names separated by blancs. To be compiled runtime
// using ACLiC on the worker nodes.
plugin->SetAnalysisSource("AliTrackletsTask.cxx");
// Declare all libraries (other than the default ones for the framework. These will be
// loaded by the generated analysis macro. Add all extra files (task .cxx/.h) here.
plugin->SetAdditionalLibs("AliTrackletsTask.h AliTrackletsTask.cxx");
// Declare the output file names separated by blancs.
// (can be like: file.root or file.root@ALICE::Niham::File)
//plugin->SetOutputFiles("Pt.ESD.1.root");
plugin->SetDefaultOutputs();
// Optionally define the files to be archived.
// plugin->SetOutputArchive("log_archive.zip:stdout,stderr@ALICE::NIHAM::File root_archive.zip:*.root@ALICE::NIHAM::File");
plugin->SetOutputArchive("log_archive.zip:stdout,stderr");
// Optionally set a name for the generated analysis macro (default MyAnalysis.C)
plugin->SetAnalysisMacro("MacroTrackletsTask.C");
// Optionally set maximum number of input files/subjob (default 100, put 0 to ignore)
plugin->SetSplitMaxInputFileNumber(50);
// Optionally modify the executable name (default analysis.sh)
plugin->SetExecutable("ExecutableTrackletsTask.sh");
// Optionally set number of failed jobs that will trigger killing waiting sub-jobs.
// plugin->SetMaxInitFailed(5);
// Optionally resubmit threshold.
// plugin->SetMasterResubmitThreshold(90);
// Optionally set time to live (default 30000 sec)
plugin->SetTTL(28000);
// Optionally set input format (default xml-single)
plugin->SetInputFormat("xml-single");
// Optionally modify the name of the generated JDL (default analysis.jdl)
plugin->SetJDLName("JdlTrackletsTask.jdl");
// Optionally modify job price (default 1)
plugin->SetPrice(1);
// Optionally modify split mode (default 'se')
plugin->SetSplitMode("se");
return plugin;
}
AliAnalysisGrid* CreateAlienHandlerTrigger(const char * run,const char * recopass="******", Bool_t isMC=kFALSE)
{
// Check if user has a valid token, otherwise make one. This has limitations.
// One can always follow the standard procedure of calling alien-token-init then
// source /tmp/gclient_env_$UID in the current shell.
TGrid::Connect("alien:");
AliAnalysisAlien *plugin = new AliAnalysisAlien();
// Set the run mode (can be "full", "test", "offline", "submit" or "terminate")
plugin->SetRunMode("full");
//plugin->SetRunMode("test");
// Set versions of used packages
plugin->SetAPIVersion("V1.1x");
plugin->SetROOTVersion("v5-27-06-2");
plugin->SetAliROOTVersion("v4-21-03-AN");
// Declare input data to be processed.
// Method 1: Create automatically XML collections using alien 'find' command.
// Define production directory LFN
// LHC09d
// /alice/data/2009/LHC09d/000104892/ESDs/pass6/
if (!isMC)
plugin->SetGridDataDir(Form("/alice/data/2010/LHC10h/%s/ESDs/%s/", run,recopass));
else
plugin->SetGridDataDir(Form("/alice/sim/%s",recopass));
// Set data search pattern
plugin->SetDataPattern("AliESDs.root");
// ...then add run numbers to be considered
// plugin->AddRunNumber(104892);
// plugin->AddRunNumber(300001);
// Method 2: Declare existing data files (raw collections, xml collections, root file)
// If no path mentioned data is supposed to be in the work directory (see SetGridWorkingDir())
// XML collections added via this method can be combined with the first method if
// the content is compatible (using or not tags)
// plugin->AddDataFile("tag.xml");
// plugin->AddDataFile("/alice/data/2008/LHC08c/000057657/raw/Run57657.Merged.RAW.tag.root");
// Define alien work directory where all files will be copied. Relative to alien $HOME.
plugin->SetGridWorkingDir(Form("MultPb/Task_%s_%s",run,recopass));
// Declare alien output directory. Relative to working directory.
plugin->SetGridOutputDir("out");
// Declare the analysis source files names separated by blancs. To be compiled runtime
// using ACLiC on the worker nodes.
plugin->SetAnalysisSource("AliAnalysisTaskTriggerStudy.cxx AliHistoListWrapper.cxx");
// Declare all libraries (other than the default ones for the framework. These will be
// loaded by the generated analysis macro. Add all extra files (task .cxx/.h) here.
plugin->SetAdditionalLibs("AliAnalysisTaskTriggerStudy.cxx AliHistoListWrapper.cxx AliAnalysisTaskTriggerStudy.h AliHistoListWrapper.h");
// plugin->SetAdditionalLibs("AliCollisionsNormalization.cxx AliCollisionNormalizationTask.cxx AliPhysicsSelection.cxx AliCollisionsNormalization.h AliCollisionNormalizationTask.h AliPhysicsSelection.h");
// I'm using a modified ANALYSISalice package, so I need to load par files for everything
plugin->EnablePackage("STEERBase");
plugin->EnablePackage("ESD");
plugin->EnablePackage("AOD");
plugin->EnablePackage("CORRFW");
plugin->EnablePackage("ANALYSIS");
plugin->EnablePackage("ANALYSISalice");
// Declare the output file names separated by blancs.
// (can be like: file.root or file.root@ALICE::Niham::File)
plugin->SetDefaultOutputs(kFALSE);
// plugin->SetOutputFiles(Form("EventStat_temp.root %s",outfilename);
plugin->SetOutputFiles("Trig_Temp.root");
// Optionally define the files to be archived.
// plugin->SetOutputArchive("log_archive.zip:stdout,stderr@ALICE::NIHAM::File root_archive.zip:*.root@ALICE::NIHAM::File");
plugin->SetOutputArchive("log_archive.zip:stdout,stderr");
// Optionally set a name for the generated analysis macro (default MyAnalysis.C)
plugin->SetAnalysisMacro("AnalysisTrigger.C");
// Optionally set maximum number of input files/subjob (default 100, put 0 to ignore)
plugin->SetSplitMaxInputFileNumber(100);
// Optionally set number of failed jobs that will trigger killing waiting sub-jobs.
plugin->SetMaxInitFailed(5);
// Optionally resubmit threshold.
plugin->SetMasterResubmitThreshold(90);
// Optionally set time to live (default 30000 sec)
plugin->SetTTL(30000);
// Optionally set input format (default xml-single)
plugin->SetInputFormat("xml-single");
// Optionally modify the name of the generated JDL (default analysis.jdl)
plugin->SetJDLName("TaskNorm.jdl");
// Optionally modify job price (default 1)
plugin->SetPrice(1);
// Optionally modify split mode (default 'se')
plugin->SetSplitMode("se");
return plugin;
}
void RsnGridPlugin(TString analysisMode) {
Bool_t valid = kTRUE;
TString dsConfig = AliAnalysisManager::GetGlobalStr("rsnTrainDSConfig",valid);
Int_t globalTrainID = AliAnalysisManager::GetGlobalInt("rsnGlobalTrainID",valid);
Int_t numRuns = AliAnalysisManager::GetGlobalInt("rsnGridNumRuns",valid);
Int_t numRunsSkip = AliAnalysisManager::GetGlobalInt("rsnGridNumRunsSkip",valid);
AliAnalysisManager *mgr = AliAnalysisManager::GetAnalysisManager();
if (!mgr) {
Printf("Error[RsnGridPlugin] mgr is null !!!");
return;
}
AliAnalysisAlien *plugin = (AliAnalysisAlien *) mgr->GetGridHandler();
if (!plugin) {
Printf("Error[RsnGridPlugin] : plugin is null !!!");
return;
}
// getting latest train id
TString rsnTrainName = gSystem->BaseName(dsConfig.Data());
rsnTrainName.ReplaceAll(".txt","");
rsnTrainName.Append(TString::Format("/%03d/%d_%d",globalTrainID,numRunsSkip,numRuns).Data());
if (!gGrid) TGrid::Connect("alien://");
if (!gGrid) return;
TGridResult *r = gGrid->Query(TString::Format("%s/RsnTrain/%s",gGrid->GetHomeDirectory(),rsnTrainName.Data()).Data(),"*/analysis.root");
Int_t idRsnTrain = 0;
if (r) {
TString s = r->GetKey(r->GetSize()-1,"lfn");
s.ReplaceAll("/analysis.root","");
s = gSystem->BaseName(s);
if (!s.IsNull()) idRsnTrain = s.Atoi();
if (!analysisMode.CompareTo("full")) idRsnTrain++;
}
rsnTrainName.Append(Form("/%03d",idRsnTrain));
TString rsnTrainWkDir = TString::Format("RsnTrain/%s",rsnTrainName.Data()).Data();
Info("RsnGridPlugin()",TString::Format("RSN Train directory : %s%s",gGrid->GetHomeDirectory(),rsnTrainWkDir.Data()).Data());
plugin->SetGridWorkingDir(rsnTrainWkDir.Data());
plugin->SetGridOutputDir("output"); // In this case will be $HOME/work/output
plugin->SetAPIVersion("V1.1x");
TString rootver = AliAnalysisManager::GetGlobalStr("rsnLegoTrainROOTversion",valid);
plugin->SetROOTVersion(rootver.Data());
TString alirootVersion = AliAnalysisManager::GetGlobalStr("rsnLegoTrainAliROOTversion",valid);
if (alirootVersion.IsNull()) {
if (gSystem->Getenv("ALICE_ROOT")) alirootVersion = gSystem->GetFromPipe("aliroot --version | awk '{print $3}'");
}
plugin->SetAliROOTVersion(alirootVersion.Data());
plugin->SetExecutableCommand("aliroot -b -q");
plugin->SetAnalysisMacro("RsnTrain.C");
plugin->SetMasterResubmitThreshold(90);
plugin->SetTTL(84600);
plugin->SetInputFormat("xml-single");
plugin->SetJDLName("RsnTrain.jdl");
plugin->SetPrice(1);
plugin->SetSplitMode("se");
plugin->SetNtestFiles(2);
plugin->SetMergeViaJDL();
plugin->SetOverwriteMode(kFALSE);
// plugin->SetKeepLogs(kTRUE);
RsnSetData(plugin,dsConfig,numRuns,numRunsSkip,1000);
plugin->SetSplitMaxInputFileNumber(25);
// Fatal("RsnDataSet","No dataset found !!!");
}
//______________________________________________________________________________
AliAnalysisGrid* CreateAlienHandler(const char *taskname, const char *gridmode,
const char *proofcluster, const char *proofdataset)
{
AliAnalysisAlien *plugin = new AliAnalysisAlien();
// Set the run mode (can be "full", "test", "offline", "submit" or "terminate")
plugin->SetRunMode(gridmode);
// Set versions of used packages
plugin->SetAPIVersion("V1.1x");
plugin->SetROOTVersion("v5-34-08");
plugin->SetAliROOTVersion("vAN-20140915");
plugin->SetExecutableCommand("aliroot -b -q");
// Declare input data to be processed.
// Method 1: Create automatically XML collections using alien 'find' command.
// Define production directory LFN
// plugin->SetGridDataDir("/alice/data/2010/LHC10h");
// plugin->SetGridDataDir(" /alice/data/2011/LHC11h_2/"); //sim
// plugin->SetDataPattern("pass2/*AliAOD.root"); // sim
plugin->SetGridDataDir("/alice/data/2011/LHC11h_2/"); //sim
plugin->SetDataPattern("*/pass2/*AliESDs.root"); // sim
plugin->SetRunPrefix("000"); // real data
Int_t runlist[] = { // Counter
170309, 170308, 170306, 170270, 170269, 170268, 170230, 170228, 170204, 170203, // 10
170193, 170163, 170159, 170155, 170081, 170027, 169859, 169858, 169855, 169846, // 20
169838, 169837, 169835, 169417, 169415, 169411, 169238, 169167, 169160, 169156, // 30
169148, 169145, 169144, 169138, 169094, 169091, 169035, 168992, 168988, 168826, // 40
168777, 168514, 168512, 168511, 168467, 168464, 168460, 168458, 168362, 168361, // 50
168342, 168341, 168325, 168322, 168311, 168310, 167988, 167987 // 58
};
for(Int_t i = 0; i < 9; i++)
plugin->AddRunNumber(runlist[i]);
plugin->SetNrunsPerMaster(3);
plugin->SetOutputToRunNo();
// Method 2: Declare existing data files (raw collections, xml collections, root file)
// plugin->AddDataFile("/alice/data/2008/LHC08c/000057657/raw/Run57657.Merged.RAW.tag.root");
// Define alien work directory where all files will be copied. Relative to alien $HOME.
plugin->SetGridWorkingDir(taskname);
// Declare alien output directory. Relative to working directory.
plugin->SetGridOutputDir("output"); // In this case will be $HOME/taskname/out
// plugin->SetAdditionalLibs("libTree.so libGeom.so libPhysics.so libVMC.so libMinuit.so libSTEERBase.so libESD.so libAOD.so libANALYSIS.so libOADB.so libANALYSISalice.so libCORRFW.so libPWGHFbase.so libPWGflowBase.so libPWGflowTasks.so libPWGHFvertexingHF.so");
// plugin->SetAdditionalLibs("libCORRFW.so libPWGHFbase.so libPWGflowBase.so libPWGflowTasks.so libPWGHFvertexingHF.so");
plugin->SetAnalysisSource("AliAnalysisTaskFlowd.cxx");
//plugin->SetAdditionalLibs("AliAnalysisTaskFlowd.h AliAnalysisTaskFlowd.cxx ");
cout<<"-->>>>>>>>>>>>>>>>>>>>>>>>> 1"<<endl;
// Declare the analysis source files names separated by blancs. To be compiled runtime
// using ACLiC on the worker nodes.
//plugin->SetAdditionalLibs("libPWGHFbase.so libPWGflowBase.so libPWGflowTasks.so libPWGHFvertexingHF.so AliAODMuonReplicator0.so");
cout<<"-->>>>>>>>>>>>>>>>>>>>>>>>> 2"<<endl;
// plugin->SetAdditionalLibs("libTree.so libGeom.so libPhysics.so libVMC.so libMinuit.so libSTEERBase.so libESD.so libAOD.so libANALYSIS.so libOADB.so libANALYSISalice.so libCORRFW.so libPWGHFbase.so libPWGflowBase.so libPWGflowTasks.so libPWGHFvertexingHF.so");
// plugin->SetAnalysisSource("AliAnalysisTaskESDMuonFilterO.cxx");
//plugin->SetAnalysisSource("AliAODMuonReplicator0.cxx");
// Declare all libraries (other than the default ones for the framework. These will be
// loaded by the generated analysis macro. Add all extra files (task .cxx/.h) here.
// plugin->SetAdditionalLibs("AliAODMuonReplicator0_cxx.so");
// plugin->SetAdditionalLibs("AliAnalysisTaskESDMuonFilterO_cxx.so");
//questo
plugin->SetAdditionalLibs("libSTEERBase.so libESD.so AliAnalysisTaskFlowd.h AliAnalysisTaskFlowd.cxx libPWGflowBase.so libPWGflowTasks.so libPWGHFbase.so libPWGHFvertexingHF.so");
plugin->AddIncludePath("-I. -I$ROOTSYS/include -I$ALICE_ROOT -I$ALICE_ROOT/include -I$ALICE_ROOT/ITS -I$ALICE_ROOT/TPC -I$ALICE_ROOT/CONTAINERS -I$ALICE_ROOT/STEER/STEER -I$ALICE_ROOT/STEER/STEERBase -I$ALICE_ROOT/STEER/ESD -I$ALICE_ROOT/STEER/AOD -I$ALICE_ROOT/TRD -I$ALICE_ROOT/macros -I$ALICE_ROOT/ANALYSIS -I$ALICE_ROOT/OADB -I$ALICE_ROOT/PWGHF -I$ALICE_ROOT/PWGHF/base -I$ALICE_ROOT/PWGHF/vertexingHF -I$ALICE_ROOT/PWG/FLOW/Base -I$ALICE_ROOT/PWG/FLOW/Tasks -g");
// plugin->SetAdditionalLibs("AliAODMuonReplicator0.h AliAODMuonReplicator0.cxx");
// plugin->SetAdditionalLibs("AliAnalysisTaskESDMuonFilterO.h AliAnalysisTaskESDMuonFilterO.cxx");
//plugin->SetAdditionalLibs("AliAODMuonReplicator0.h AliAODMuonReplicator0.cxx AliAnalysisTaskESDMuonFilterO.h AliAnalysisTaskESDMuonFilterO.cxx");
cout<<"-->>>>>>>>>>>>>>>>>>>>>>>>> 3"<<endl;
// plugin->SetAdditionalLibs("AliAODMuonReplicator0.h AliAODMuonReplicator0.cxx");
// plugin->SetAdditionalLibs("AliAnalysisTaskESDMuonFilterO.h AliAnalysisTaskESDMuonFilterO.cxx");
// Declare the output file names separated by blancs.
// (can be like: file.root or file.root@ALICE::Niham::File)
// To only save certain files, use SetDefaultOutputs(kFALSE), and then
// SetOutputFiles("list.root other.filename") to choose which files to save
plugin->SetDefaultOutputs();
//plugin->SetOutputFiles("list.root");
// Optionally set a name for the generated analysis macro (default MyAnalysis.C)
plugin->SetAnalysisMacro(Form("%s.C",taskname));
// Optionally set maximum number of input files/subjob (default 100, put 0 to ignore)
plugin->SetSplitMaxInputFileNumber(10);
// Optionally modify the executable name (default analysis.sh)
plugin->SetExecutable(Form("%s.sh",taskname));
// set number of test files to use in "test" mode
plugin->SetNtestFiles(1);
// file containing a list of chuncks to be used for testin
plugin->SetFileForTestMode("testdata");
// Optionally resubmit threshold.
plugin->SetMasterResubmitThreshold(90);
// Optionally set time to live (default 30000 sec)
plugin->SetTTL(30000);
// Optionally set input format (default xml-single)
plugin->SetInputFormat("xml-single");
// Optionally modify the name of the generated JDL (default analysis.jdl)
plugin->SetJDLName(Form("%s.jdl",taskname));
// Optionally modify job price (default 1)
plugin->SetPrice(1);
// Optionally modify split mode (default 'se')
plugin->SetSplitMode("se");
//----------------------------------------------------------
//--- PROOF MODE SPECIFIC SETTINGS ------------
//----------------------------------------------------------
// Proof cluster
plugin->SetProofCluster(proofcluster);
// Dataset to be used
plugin->SetProofDataSet(proofdataset);
// May need to reset proof. Supported modes: 0-no reset, 1-soft, 2-hard
plugin->SetProofReset(0);
// May limit number of workers
plugin->SetNproofWorkers(0);
// May limit the number of workers per slave
plugin->SetNproofWorkersPerSlave(1);
// May use a specific version of root installed in proof
plugin->SetRootVersionForProof("current");
// May set the aliroot mode. Check http://aaf.cern.ch/node/83
plugin->SetAliRootMode("default"); // Loads AF libs by default
// May request ClearPackages (individual ClearPackage not supported)
plugin->SetClearPackages(kFALSE);
// Plugin test mode works only providing a file containing test file locations, used in "local" mode also
plugin->SetFileForTestMode("files.txt"); // file should contain path name to a local directory containg *ESDs.root etc
// Request connection to alien upon connection to grid
plugin->SetProofConnectGrid(kFALSE);
cout<<"-->>>>>>>>>>>>>>>>>>>>>>>>> 4"<<endl;
return plugin;
cout<<"-->>>>>>>>>>>>>>>>>>>>>>>>> 5"<<endl;
}
AliAnalysisGrid* CreateAlienHandlerHadEt(Int_t dataset, Bool_t data, Int_t test, Int_t material, Bool_t altV0Scale = kFALSE, bool runCompiledVersion = kFALSE, int simflag = 0)
{
// Check if user has a valid token, otherwise make one. This has limitations.
// One can always follow the standard procedure of calling alien-token-init then
// source /tmp/gclient_env_$UID in the current shell.
//if (!AliAnalysisGrid::CreateToken()) return NULL;
AliAnalysisAlien *plugin = new AliAnalysisAlien();
// Overwrite all generated files, datasets and output results from a previous session
plugin->SetOverwriteMode();
// Set the run mode (can be "full", "test", "offline", "submit" or "terminate")
if(test==1){
plugin->SetRunMode("test"); // VERY IMPORTANT - DECRIBED BELOW
}
else{
if(test==0){
plugin->SetRunMode("full"); // VERY IMPORTANT - DECRIBED BELOW
}
else{
plugin->SetRunMode("terminate"); // VERY IMPORTANT - DECRIBED BELOW
}
}
//needed for local testing?
//plugin->SetFileForTestMode("files.txt"); // file should contain path name to a local directory containg *ESDs.root etc
// Set versions of used packages
plugin->SetAPIVersion("V1.1x");
plugin->SetROOTVersion("v5-34-08-6");
plugin->SetAliROOTVersion("vAN-20140624");
// Declare input data to be processed.
plugin->AddIncludePath("-I$ALICE_ROOT/PWGUD/base -I$ALICE_ROOT/ANALYSIS -I$ALICE_ROOT/PWGPP -I$ALICE_ROOT/PWGPP/ITS");
// Method 1: Create automatically XML collections using alien 'find' command.
// Define production directory LFN
// plugin->SetGridDataDir("/alice/sim/LHC10a18");
// Set data search pattern
// plugin->SetDataPattern("*ESDs.root"); // simulated, tags not used
// plugin->SetDataPattern("*ESDs/pass4/*ESDs.root"); // real data check reco pass and data base directory
// plugin->SetRunPrefix("000"); // real data
// plugin->SetDataPattern("*tag.root"); // Use ESD tags (same applies for AOD's)
// ...then add run numbers to be considered
// plugin->AddRunNumber(125020); // simulated
// plugin->AddRunNumber(104065); // real data
// Method 2: Declare existing data files (raw collections, xml collections, root file)
// If no path mentioned data is supposed to be in the work directory (see SetGridWorkingDir())
// XML collections added via this method can be combined with the first method if
// the content is compatible (using or not tags)
//plugin->AddDataFile("tag.xml");
// plugin->AddDataFile("/alice/data/2008/LHC08c/000057657/raw/Run57657.Merged.RAW.tag.root");
TString outputdir = "etPbPbSim";
if(data)outputdir = "etPbPbData";
if(dataset==20100){//PbPb 2.76 TeV
if(data){//185 jobs
cout<<"Running over data"<<endl;
plugin->SetGridDataDir("/alice/data/2010/LHC10h");//PbPb data
plugin->SetDataPattern("*ESDs/pass2/*ESDs.root");
plugin->SetRunPrefix("000"); // real data
}
else{
cout<<"Running over MC"<<endl;
if(material==0){
plugin->SetGridDataDir("/alice/sim/LHC11a10a_bis");
//plugin->SetGridDataDir("/alice/sim/LHC11a4_bis");//PbPb simulation
}
if(material==1){//7% more material
plugin->SetGridDataDir("/alice/sim/LHC10h9");//PbPb simulation
}
if(material==-1){//7% less material
plugin->SetGridDataDir("/alice/sim/LHC10h10");//PbPb simulation
}
if(material==10){//OK it's a cheat but this runs on DPM jet
plugin->SetGridDataDir("/alice/sim/LHC10h2");//PbPb simulation
}
if(material==11){//OK it's a cheat but this runs on AMPT
plugin->SetGridDataDir(" /alice/sim/LHC11a9a");//PbPb simulation
plugin->AddRunNumber(137366);
}
plugin->SetDataPattern("*ESDs.root");
//plugin->SetGridWorkingDir("etPbPbSim");
}
if(simflag==0){//not really using it as a simflag but that way I don't need a new argument...
plugin->AddRunNumber(139465);
outputdir += "139465";
}
if(simflag==1){//not really using it as a simflag but that way I don't need a new argument...
outputdir += "138442";
plugin->AddRunNumber(138442);
}
if(simflag==2){//not really using it as a simflag but that way I don't need a new argument...
outputdir += "138364";
plugin->AddRunNumber(138364);
}
if(simflag==3){//not really using it as a simflag but that way I don't need a new argument...
outputdir += "138396";
plugin->AddRunNumber(138396);
}
if(simflag==4){//not really using it as a simflag but that way I don't need a new argument...
outputdir += "137722";
plugin->AddRunNumber(137722);
}
if(simflag==5){//not really using it as a simflag but that way I don't need a new argument...
outputdir += "137366";
plugin->AddRunNumber(137366);
}
if(simflag==6){//not really using it as a simflag but that way I don't need a new argument...
outputdir += "137161";
plugin->AddRunNumber(137161);
}
cout<<"writing to "<<outputdir.Data()<<endl;
}
else{
if(dataset==2011){//PbPb 2.76 TeV
if(data){//185 jobs
cout<<"Running over data"<<endl;
plugin->SetGridDataDir("/alice/data/2011/LHC11h_2");//PbPb data
plugin->SetDataPattern("*ESDs/pass2/*ESDs.root");
plugin->SetRunPrefix("000"); // real data
}
else{
cout<<"Running over MC"<<endl;
if(simflag==0){//2011 production - 0-10%
cout<<"I am here setting grid data dir"<<endl;
// outputDir = outputDir + "LHC13e1a";
plugin->SetGridDataDir("/alice/sim/2013/LHC13e1a");
}
if(simflag==1){//2011 production - 0-10%
cout<<"I am here setting grid data dir"<<endl;
// outputDir = outputDir + "LHC13e1a";
plugin->SetGridDataDir("/alice/sim/2013/LHC13e1b");
}
if(simflag==2){//2011 production - 0-10%
cout<<"I am here setting grid data dir"<<endl;
// outputDir = outputDir + "LHC13e1a";
plugin->SetGridDataDir("/alice/sim/2013/LHC13e1b");
}
}
plugin->AddRunNumber(168464);
}
if(dataset==2009){//pp 900 GeV
if(data){//only 233 jobs!
cout<<"Running over data"<<endl;
plugin->SetGridDataDir("/alice/data/2010/LHC10c");//PbPb data
//plugin->SetDataPattern("*ESDs/pass3/*ESDs.root");
plugin->SetDataPattern("*ESDs/pass3/*ESDs.root");
plugin->SetRunPrefix("000"); // real data
}
else{//sim over 1500 jobs, some get killed because it's above quota
cout<<"Running over MC"<<endl;
if(simflag==0){
if(material==0){
plugin->SetGridDataDir("/alice/sim/LHC11b1a");//PbPb simulation
}
if(material==1){//10% more material budget
plugin->SetGridDataDir("/alice/sim/LHC11b1b");//PbPb simulation
}
if(material==-1){//10% less material budget
plugin->SetGridDataDir("/alice/sim/LHC11b1c");//PbPb simulation
}
}
if(simflag==1) plugin->SetGridDataDir("/alice/sim/2011/LHC11h1a");//PYTHIA
if(simflag==2) plugin->SetGridDataDir("/alice/sim/2011/LHC11h1b");//PHOJET
if(simflag==3) plugin->SetGridDataDir("/alice/sim/2011/LHC11h1c");//PYTHIA Flat
plugin->SetDataPattern("*ESDs.root");
}
plugin->AddRunNumber(118506);
// plugin->AddRunNumber(121040);
// plugin->AddRunNumber(121039);
// plugin->AddRunNumber(118561);
// plugin->AddRunNumber(118560);
// plugin->AddRunNumber(118558);
// plugin->AddRunNumber(118557);
// plugin->AddRunNumber(118556);
// plugin->AddRunNumber(118518);
// plugin->AddRunNumber(118512);
// plugin->AddRunNumber(118507);
// plugin->AddRunNumber(118506);
//if(data){
// plugin->AddRunNumber(118504);
// plugin->AddRunNumber(118503);
// }
}
if(dataset==20111){//pp 2.76 TeV
if(data){//257 jobs
cout<<"Running over data"<<endl;
plugin->SetGridDataDir("/alice/data/2011/LHC11a");//
plugin->SetDataPattern("*ESDs/pass4_with_SDD/*ESDs.root");
plugin->SetRunPrefix("000"); // real data
}
else{//sim - 332 jobs
cout<<"Running over MC"<<endl;
if(simflag==0) plugin->SetGridDataDir("/alice/sim/LHC11b10a");//
if(simflag==1) plugin->SetGridDataDir("/alice/sim/2011/LHC11h5a");//PYTHIA
if(simflag==2) plugin->SetGridDataDir("/alice/sim/2011/LHC11h5b");//PHOJET
if(simflag==3) plugin->SetGridDataDir("/alice/sim/2011/LHC11h5c");//PYTHIA Flat
plugin->SetDataPattern("*ESDs.root");
}
// plugin->AddRunNumber(146860);
// plugin->AddRunNumber(146859);
// plugin->AddRunNumber(146856);
// plugin->AddRunNumber(146824);
// plugin->AddRunNumber(146817);
// plugin->AddRunNumber(146806);
// plugin->AddRunNumber(146805);
// plugin->AddRunNumber(146804);
// plugin->AddRunNumber(146803);
// plugin->AddRunNumber(146802);
// plugin->AddRunNumber(146801);
// plugin->AddRunNumber(146748);
// plugin->AddRunNumber(146747);
// plugin->AddRunNumber(146746);
// plugin->AddRunNumber(146860);
// plugin->AddRunNumber(146859);
// plugin->AddRunNumber(146858);
// plugin->AddRunNumber(146857);
// plugin->AddRunNumber(146856);
// plugin->AddRunNumber(146824);
// if(data){//these productions are not yet done for MC
// plugin->AddRunNumber(146817);
// plugin->AddRunNumber(146807);
// plugin->AddRunNumber(146806);
// plugin->AddRunNumber(146805);
// plugin->AddRunNumber(146804);
// plugin->AddRunNumber(146803);
// plugin->AddRunNumber(146802);
// }
plugin->AddRunNumber(146805);
}
if(dataset==2010){//pp 7 TeV
if(data){//data - 569 jobs
cout<<"Running over 7 TeV data"<<endl;
plugin->SetGridDataDir("/alice/data/2010/LHC10e");//PbPb data
plugin->SetDataPattern("*ESDs/pass2/*ESDs.root");
cout<<"Setting run prefix to be 000"<<endl;
plugin->SetRunPrefix("000"); // real data
}
else{//sim- 346 jobs
if(simflag==0) plugin->SetGridDataDir("/alice/sim/LHC10e20");//
if(simflag==1) plugin->SetGridDataDir("/alice/sim/2011/LHC11h4a");//PYTHIA
if(simflag==2) plugin->SetGridDataDir("/alice/sim/2011/LHC11h4b");//PHOJET
if(simflag==3) plugin->SetGridDataDir("/alice/sim/2011/LHC11h4c");//PYTHIA Flat
plugin->SetDataPattern("*ESDs.root");
}
plugin->AddRunNumber("130795");
// plugin->AddRunNumber("130840");
// plugin->AddRunNumber("130834");
// plugin->AddRunNumber("130833");
// plugin->AddRunNumber("130831");
// plugin->AddRunNumber("130804");
// plugin->AddRunNumber("130803");
// plugin->AddRunNumber("130802");
// plugin->AddRunNumber("130799");
// plugin->AddRunNumber("130798");
// plugin->AddRunNumber("130795");
}
if(dataset==2012){//pp 8 TeV
if(data){//data - 569 jobs
cout<<"Running over 8 TeV data"<<endl;
plugin->SetGridDataDir("/alice/data/2012/LHC12b");//PbPb data
plugin->SetDataPattern("*ESDs/pass1/*ESDs.root");
cout<<"Setting run prefix to be 000"<<endl;
plugin->SetRunPrefix("000"); // real data
}
else{//sim- 346 jobs
plugin->SetGridDataDir("/alice/sim/2012/LHC12c1b");//
}
//plugin->AddRunNumber("177799");
plugin->AddRunNumber("178030");
}
if(dataset==2013){//pPb
if(data){//data - 569 jobs
cout<<"Running over pPb data"<<endl;
plugin->SetGridDataDir("/alice/data/2013/LHC13b");//PbPb data
plugin->SetDataPattern("*ESDs/pass3/*ESDs.root");
cout<<"Setting run prefix to be 000"<<endl;
plugin->SetRunPrefix("000"); // real data
}
else{//sim- 346 jobs
plugin->SetGridDataDir("/alice/sim/2013/LHC13b3");//
}
plugin->AddRunNumber("195483");
}
}
if(dataset==20100){//PbPb 2.76 TeV
if(data){
//plugin->SetGridWorkingDir("etPbPbData");
plugin->SetGridWorkingDir(outputdir.Data());
}
else{
if(material==0){plugin->SetGridWorkingDir(outputdir.Data());}
if(material==-1) plugin->SetGridWorkingDir("etPbPbSimMatBudLow");
if(material==1) plugin->SetGridWorkingDir("etPbPbSimMatBudHigh");
if(material==10) plugin->SetGridWorkingDir("etPbPbSimDPMJET");
if(material==11) plugin->SetGridWorkingDir("etPbPbSimAMPT");
}
}
else{
if(dataset==2011){//PbPb 2.76 TeV
if(data){
plugin->SetGridWorkingDir("etPbPbData2011");
}
else{
if(simflag==0){plugin->SetGridWorkingDir("etPbPbSim2011LHC13e1a");}
if(simflag==1){plugin->SetGridWorkingDir("etPbPbSim2011LHC13e1b");}
if(simflag==2){plugin->SetGridWorkingDir("etPbPbSim2011LHC13e1c");}
}
}
if(dataset==2009){//pp 900 GeV
if(data){
plugin->SetGridWorkingDir("etpp900GeVData");
}
else{
if(simflag==0){
if(material==0) plugin->SetGridWorkingDir("etpp900GeVSim");
if(material==-1) plugin->SetGridWorkingDir("etpp900GeVSimMatBudLow");
if(material==1) plugin->SetGridWorkingDir("etpp900GeVSimMatBudHigh");
}
if(simflag==1) plugin->SetGridWorkingDir("etpp900GeVSimPYTHIA");//PYTHIA
if(simflag==2) plugin->SetGridWorkingDir("etpp900GeVSimPHOJET");//PHOJET
if(simflag==3) plugin->SetGridWorkingDir("etpp900GeVSimPYTHIAFLAT");//PYTHIA Flat
}
}
if(dataset==20111){//pp 2.76 TeV
if(data){
//plugin->SetGridWorkingDir("etpp276TeVData");
}
else{
if(altV0Scale) plugin->SetGridWorkingDir("etpp276TeVSimAlt");
else{
// plugin->SetGridWorkingDir("etpp276TeVSim");
if(simflag==0) plugin->SetGridWorkingDir("etpp276TeVSim");//
if(simflag==1) plugin->SetGridWorkingDir("etpp276TeVSimPYTHIA");//PYTHIA
if(simflag==2) plugin->SetGridWorkingDir("etpp276TeVSimPHOJET");//PHOJET
if(simflag==3) plugin->SetGridWorkingDir("etpp276TeVSimPYTHIAFLAT");//PYTHIA Flat
}
}
}
if(dataset==2010){//pp 7 TeV
if(data){
plugin->SetGridWorkingDir("etpp7TeVData");
}
else{
if(simflag==0) plugin->SetGridWorkingDir("etpp7TeVSim");//
if(simflag==1) plugin->SetGridWorkingDir("etpp7TeVSimPYTHIA");//PYTHIA
if(simflag==2) plugin->SetGridWorkingDir("etpp7TeVSimPHOJET");//PHOJET
if(simflag==3) plugin->SetGridWorkingDir("etpp7TeVSimPYTHIAFLAT");//PYTHIA Flat
}
}
if(dataset==2012){//pp 8 TeV
if(data){
plugin->SetGridWorkingDir("etpp8TeVData");
}
else{
plugin->SetGridWorkingDir("etpp8TeVSim");
}
}
if(dataset==2013){//pPb
if(data){
plugin->SetGridWorkingDir("etpPb5TeVData");
}
else{
plugin->SetGridWorkingDir("etpPb5TeVSim");
}
}
}
cout<<"writing to "<<outputdir.Data()<<endl;
// Define alien work directory where all files will be copied. Relative to alien $HOME.
//plugin->SetGridWorkingDir("et");
// Declare alien output directory. Relative to working directory.
plugin->SetGridOutputDir("output"); // In this case will be $HOME/work/output
// Declare the analysis source files names separated by blancs. To be compiled runtime IN THE SAME ORDER THEY ARE LISTED
// using ACLiC on the worker nodes.
//plugin->SetAnalysisSource("AliAnalysisTaskHadEt.cxx");
//plugin->SetAnalysisSource("AliAnalysisEt.cxx AliAnalysisEtMonteCarlo.cxx AliAnalysisEtMonteCarloPhos.cxx AliAnalysisEtReconstructed.cxx AliAnalysisEtReconstructedPhos.cxx AliAnalysisHadEt.cxx AliAnalysisHadEtMonteCarlo.cxx AliAnalysisHadEtReconstructed.cxx AliAnalysisTaskHadEt.cxx AliAnalysisTaskTotEt.cxx");
//TString sourcefiles = "AliAnalysisEtCuts.cxx AliAnalysisHadEtCorrections.cxx AliAnalysisEtCommon.cxx AliAnalysisHadEt.cxx AliAnalysisHadEtMonteCarlo.cxx AliAnalysisHadEtReconstructed.cxx AliAnalysisEtSelectionContainer.cxx AliAnalysisEtSelectionHandler.cxx AliAnalysisTaskTransverseEnergy.cxx AliAnalysisTaskHadEt.cxx";
//plugin->SetAnalysisSource(sourcefiles.Data());
if(!runCompiledVersion){
plugin->SetAnalysisSource("AliAnalysisEtCuts.cxx AliAnalysisHadEtCorrections.cxx AliAnalysisEtCommon.cxx AliAnalysisHadEt.cxx AliAnalysisHadEtMonteCarlo.cxx AliAnalysisHadEtReconstructed.cxx AliAnalysisTaskTransverseEnergy.cxx AliAnalysisTaskHadEt.cxx");
}
//cout<<"Setting source files "<<sourcefiles<<endl;
// Declare all libraries (other than the default ones for the framework. These will be
// loaded by the generated analysis macro. Add all extra files (task .cxx/.h) here.
//TString additionallibs = "AliAnalysisEtCuts.h AliAnalysisEtCuts.cxx AliAnalysisHadEtCorrections.h AliAnalysisHadEtCorrections.cxx AliAnalysisEtSelectionContainer.cxx AliAnalysisEtSelectionHandler.cxx AliAnalysisTaskTransverseEnergy.cxx AliAnalysisEtCommon.h AliAnalysisEtCommon.cxx AliAnalysisHadEt.cxx AliAnalysisHadEtMonteCarlo.cxx AliAnalysisHadEtReconstructed.cxx AliAnalysisTaskHadEt.cxx AliAnalysisHadEt.h AliAnalysisHadEtMonteCarlo.h AliAnalysisHadEtReconstructed.h AliAnalysisTaskHadEt.h AliAnalysisEtSelectionContainer.h AliAnalysisEtSelectionHandler.h AliAnalysisTaskTransverseEnergy.h corrections.root ConfigHadEtAnalysis.C ConfigHadEtMonteCarlo.C ConfigHadEtReconstructed.C physicsSelections.root";
//TString additionallibs = "AliAnalysisEtCuts.h AliAnalysisEtCuts.cxx AliAnalysisHadEtCorrections.h AliAnalysisHadEtCorrections.cxx AliAnalysisEtSelectionContainer.cxx AliAnalysisEtSelectionHandler.cxx AliAnalysisTaskTransverseEnergy.cxx AliAnalysisEtCommon.h AliAnalysisEtCommon.cxx AliAnalysisHadEt.cxx AliAnalysisHadEtMonteCarlo.cxx AliAnalysisHadEtReconstructed.cxx AliAnalysisTaskHadEt.cxx AliAnalysisHadEt.h AliAnalysisHadEtMonteCarlo.h AliAnalysisHadEtReconstructed.h AliAnalysisTaskHadEt.h AliAnalysisEtSelectionContainer.h AliAnalysisEtSelectionHandler.h AliAnalysisTaskTransverseEnergy.h physicsSelections.root ConfigHadEtMonteCarlo.C ConfigHadEtReconstructed.C corrections.root";
//plugin->SetAdditionalLibs(additionallibs.Data());
if(!runCompiledVersion){//
plugin->SetAdditionalLibs( "libPWGUDbase.so AliAnalysisEtCuts.h AliAnalysisEtCuts.cxx AliAnalysisHadEtCorrections.h AliAnalysisHadEtCorrections.cxx AliAnalysisTaskTransverseEnergy.cxx AliAnalysisEtCommon.h AliAnalysisEtCommon.cxx AliAnalysisHadEt.cxx AliAnalysisHadEtMonteCarlo.cxx AliAnalysisHadEtReconstructed.cxx AliAnalysisTaskHadEt.cxx AliAnalysisHadEt.h AliAnalysisHadEtMonteCarlo.h AliAnalysisHadEtReconstructed.h AliAnalysisTaskHadEt.h AliAnalysisTaskTransverseEnergy.h ConfigHadEtMonteCarlo.C ConfigHadEtReconstructed.C corrections.root");
}
else{
plugin->SetAdditionalLibs( "ConfigHadEtMonteCarlo.C ConfigHadEtReconstructed.C corrections.root libPWGUDbase.so libPWGLFtotEt.so");
}
// No need for output file names. Procedure is automatic. <-- not true
//plugin->SetDefaultOutputs(kFALSE);
//plugin->SetOutputFiles("Et.ESD.new.sim.root");
// No need define the files to be archived. Note that this is handled automatically by the plugin.
// plugin->SetOutputArchive("log_archive.zip:stdout,stderr");
// Set a name for the generated analysis macro (default MyAnalysis.C) Make this unique !
plugin->SetAnalysisMacro("ChristinesEtAnalysis.C");
// Optionally set maximum number of input files/subjob (default 100, put 0 to ignore). The optimum for an analysis
// is correlated with the run time - count few hours TTL per job, not minutes !
plugin->SetSplitMaxInputFileNumber(50);
if(dataset==2013){//pPb
plugin->SetSplitMaxInputFileNumber(20);
}
// Optionally set number of failed jobs that will trigger killing waiting sub-jobs.
//plugin->SetMaxInitFailed(5);
// Optionally resubmit threshold.
//plugin->SetMasterResubmitThreshold(90);
// Optionally set time to live (default 30000 sec)
plugin->SetTTL(20000);
// Optionally set input format (default xml-single)
plugin->SetInputFormat("xml-single");
// Optionally modify the name of the generated JDL (default analysis.jdl)
plugin->SetJDLName("TaskEt.jdl");
// Optionally modify job price (default 1)
plugin->SetPrice(1);
// Optionally modify split mode (default 'se')
plugin->SetSplitMode("se");
plugin->SetTerminateFiles("event_stat.root") ;
plugin->SetKeepLogs();
plugin->SetMergeViaJDL();
return plugin;
}
AliAnalysisGrid* CreateAlienHandlerPbPb()
{
// Check if user has a valid token, otherwise make one. This has limitations.
// One can always follow the standard procedure of calling alien-token-init then
// source /tmp/gclient_env_$UID in the current shell.
// if (!AliAnalysisGrid::CreateToken()) return NULL;
AliAnalysisAlien *plugin = new AliAnalysisAlien();
plugin->SetOverwriteMode();
// Set the run mode (can be "full", "test", "offline", "submit" or "terminate")
plugin->SetRunMode("test");
// plugin->SetRunMode("offline");
// plugin->SetRunMode("full");
// plugin->SetRunMode("terminate");
plugin->SetNtestFiles(1);
// Set versions of used packages
plugin->SetAPIVersion("V1.1x");
plugin->SetROOTVersion("v5-33-02a");
plugin->SetAliROOTVersion("v5-03-19-AN");
// Declare input data to be processed.
// Method 1: Create automatically XML collections using alien 'find' command.
// Define production directory LFN
// On real reconstructed data:
plugin->SetGridDataDir("/alice/data/2011/LHC11h_2");
// Set data search pattern
plugin->SetDataPattern("*/pass2/*/AliESDs.root");
//same for pp MC:
// plugin->SetGridDataDir("/alice/sim/LHC10f6a");
// plugin->SetDataPattern("*/*/AliESDs.root");
// Data pattern for reconstructed data
// plugin->SetDataPattern("*AliAOD.root"); //esta linea sirve para pruebas
plugin->SetRunPrefix("000"); // real data
// ...then add run numbers to be considered
// plugin->SetRunRange(122374,126437); //sim data
//10d
// plugin->AddRunNumber(126437); //sim data
//11h.pass2
plugin->AddRunNumber(170040);
// plugin->SetOutputSingleFolder("output");
plugin->SetOutputToRunNo();
// Method 2: Declare existing data files (raw collections, xml collections, root file)
// If no path mentioned data is supposed to be in the work directory (see SetGridWorkingDir())
// XML collections added via this method can be combined with the first method if
// the content is compatible (using or not tags)
// plugin->AddDataFile("tag.xml");
// plugin->AddDataFile("/alice/data/2008/LHC08c/000057657/raw/Run57657.Merged.RAW.tag.root");
// Define alien work directory where all files will be copied. Relative to alien $HOME.
plugin->SetGridWorkingDir("work");
// Declare alien output directory. Relative to working directory.
plugin->SetGridOutputDir("output"); // In this case will be $HOME/work/output
// Declare the analysis source files names separated by blancs. To be compiled runtime
// using ACLiC on the worker nodes.
// plugin->SetAnalysisSource("AliAnalysisHelperJetTasks.cxx AliAnalysisTaskPartonDisc.cxx");
plugin->AddIncludePath("-I. .I$ALIEN_ROOT/api/lib -I$ROOTSYS/lib -I$ROOTSYS/include -I$ALICE_ROOT/include -I$ALICE_ROOT/PWGDQ/ -I$ALICE_ROOT/PWGDQ/dielectron/macrosLMEE -I$ALICE_ROOT/PWGDQ/dielectron -I$ALICE_ROOT/ANALYSIS -I$ALICE_ROOT/TENDER/Tender -I$ALICE_ROOT/TENDER/TenderSupplies");
// plugin->SetAdditionalLibs("libGui.so libXMLParser.so libSTEERBase.so libESD.so libAOD.so libCDB.so libANALYSIS.so libANALYSISalice.so libCORRFW.so libTender.so libProof.so libRAWDatabase.so libSTEER.so libTOFbase.so libPWGDQdielectron.so");// ConfigLowMassDiE.C")
plugin->SetAdditionalLibs("libGui.so libXMLParser.so libSTEERBase.so libESD.so libAOD.so libCDB.so libANALYSIS.so libANALYSISalice.so libCORRFW.so libTender.so libProof.so libRAWDatabase.so libSTEER.so libTOFbase.so libPWGDQdielectron.so ConfigLowMassDiE.C");
// Declare all libraries (other than the default ones for the framework. These will be
// loaded by the generated analysis macro. Add all extra files (task .cxx/.h) here.
// plugin->SetAdditionalLibs("AliAnalysisHelperJetTasks.h AliAnalysisHelperJetTasks.cxx AliAnalysisTaskPartonDisc.h AliAnalysisTaskPartonDisc.cxx");
// Declare the output file names separated by blancs.
// (can be like: file.root or file.root@ALICE::Niham::File)
// plugin->SetOutputFiles("Output.root");
plugin->SetDefaultOutputs();
//or specify files:
//plugin->SetDefaultOutputs(kFALSE);
//plugin->SetOutputFiles("cbaumann_LMEEpp2010_out.root");
// plugin->SetOutputFiles("cbaumann_lowmass_out.root cbaumann_lowmass_CF.root");
// Optionally define the files to be archived.
// plugin->SetOutputArchive("log_archive.zip:stdout,stderr@disk=2 root_archive.zip:*.root@disk=2");
// plugin->SetOutputArchive("log_archive.zip:stdout,stderr");
// Optionally set a name for the generated analysis macro (default MyAnalysis.C)
plugin->SetAnalysisMacro("DielAnalysis.C");
// Optionally set maximum number of input files/subjob (default 100, put 0 to ignore)
// plugin->SetSplitMaxInputFileNumber(2);
// Optionally modify the executable name (default analysis.sh)
plugin->SetExecutable("DielAnalysis.sh");
plugin->SetExecutableCommand("aliroot -b -q");
// Optionally set number of failed jobs that will trigger killing waiting sub-jobs.
// plugin->SetMaxInitFailed(5);
// Optionally resubmit threshold.
// plugin->SetMasterResubmitThreshold(90);
// Optionally set time to live (default 30000 sec)
plugin->SetTTL(30000);
// Optionally set input format (default xml-single)
plugin->SetInputFormat("xml-single");
// Optionally modify the name of the generated JDL (default analysis.jdl)
plugin->SetJDLName("DielAnalysis.jdl");
// Optionally modify job price (default 1)
plugin->SetPrice(1);
// Optionally modify split mode (default 'se')
plugin->SetSplitMode("se");
return plugin;
}
//______________________________________________________________________________
AliAnalysisGrid* CreateAlienHandler(Bool_t bAOD, Int_t bunchN, const char *taskname, const char *gridmode, const char *proofcluster, const char *proofdataset)
{
AliAnalysisAlien *plugin = new AliAnalysisAlien();
// Set the run mode (can be "full", "test", "offline", "submit" or "terminate")
plugin->SetRunMode(gridmode);
// Set versions of used packages
plugin->SetAPIVersion("V1.1x");
plugin->SetROOTVersion("v5-34-08");
plugin->SetAliROOTVersion("v5-05-19-AN");
// Declare input data to be processed.
// Method 1: Create automatically XML collections using alien 'find' command.
// Define production directory LFN
plugin->SetGridDataDir("/alice/data/2010/LHC10h/");
// On real reconstructed data:
// plugin->SetGridDataDir("/alice/data/2009/LHC09d");
// Set data search pattern
//plugin->SetDataPattern("*ESDs.root"); // THIS CHOOSES ALL PASSES
// Data pattern for reconstructed data
if(!bAOD){
plugin->SetDataPattern("*ESDs/pass2/*ESDs.root"); // CHECK LATEST PASS OF DATA SET IN ALIENSH
}
else{
plugin->SetDataPattern("*ESDs/pass2/AOD086/*/AliAOD.root");
}
plugin->SetRunPrefix("000"); // real data
// ...then add run numbers to be considered
//plugin->SetRunRange(114917,115322);
if(bunchN==0){
plugin->AddRunNumber(137366);
}
//bunch1
else if(bunchN == 1){
plugin->AddRunNumber(139510);
plugin->AddRunNumber(139507);
plugin->AddRunNumber(139505);
plugin->AddRunNumber(139503);
plugin->AddRunNumber(139465);
plugin->AddRunNumber(139438);
plugin->AddRunNumber(139437);
plugin->AddRunNumber(139360);
plugin->AddRunNumber(139329);
plugin->AddRunNumber(139328);
}
//bunch2
else if(bunchN == 2){
plugin->AddRunNumber(139314);
plugin->AddRunNumber(139310);
plugin->AddRunNumber(139309);
plugin->AddRunNumber(139173);
plugin->AddRunNumber(139107);
plugin->AddRunNumber(139105);
plugin->AddRunNumber(139038);
plugin->AddRunNumber(139037);
plugin->AddRunNumber(139036);
plugin->AddRunNumber(139029);
plugin->AddRunNumber(139028);
plugin->AddRunNumber(138872);
plugin->AddRunNumber(138871);
plugin->AddRunNumber(138870);
plugin->AddRunNumber(138837);
plugin->AddRunNumber(138732);
plugin->AddRunNumber(138730);
plugin->AddRunNumber(138666);
plugin->AddRunNumber(138662);
plugin->AddRunNumber(138653);
}
else if(bunchN == 3){
plugin->AddRunNumber(138652);
plugin->AddRunNumber(138638);
plugin->AddRunNumber(138624);
plugin->AddRunNumber(138621);
plugin->AddRunNumber(138583);
plugin->AddRunNumber(138582);
plugin->AddRunNumber(138579);
plugin->AddRunNumber(138578);
plugin->AddRunNumber(138534);
plugin->AddRunNumber(138469);
}
else if(bunchN == 4){
plugin->AddRunNumber(138442);
plugin->AddRunNumber(138439);
plugin->AddRunNumber(138438);
plugin->AddRunNumber(138396);
plugin->AddRunNumber(138364);
plugin->AddRunNumber(138275);
plugin->AddRunNumber(138225);
plugin->AddRunNumber(138201);
plugin->AddRunNumber(138197);
plugin->AddRunNumber(138192);
}
else if(bunchN == 5){
plugin->AddRunNumber(138190);
plugin->AddRunNumber(137848);
plugin->AddRunNumber(137844);
plugin->AddRunNumber(137752);
plugin->AddRunNumber(137751);
plugin->AddRunNumber(137724);
plugin->AddRunNumber(137722);
plugin->AddRunNumber(137718);
plugin->AddRunNumber(137704);
plugin->AddRunNumber(137693);
}
else if(bunchN == 6){
plugin->AddRunNumber(137692);
plugin->AddRunNumber(137691);
plugin->AddRunNumber(137686);
plugin->AddRunNumber(137685);
plugin->AddRunNumber(137639);
plugin->AddRunNumber(137638);
plugin->AddRunNumber(137608);
plugin->AddRunNumber(137595);
plugin->AddRunNumber(137549);
plugin->AddRunNumber(137546);
}
else if(bunchN == 7){
plugin->AddRunNumber(137544);
plugin->AddRunNumber(137541);
plugin->AddRunNumber(137539);
plugin->AddRunNumber(137531);
plugin->AddRunNumber(137530);
plugin->AddRunNumber(137443);
plugin->AddRunNumber(137441);
plugin->AddRunNumber(137440);
plugin->AddRunNumber(137439);
plugin->AddRunNumber(137434);
}
else if(bunchN == 8){
plugin->AddRunNumber(137432);
plugin->AddRunNumber(137431);
plugin->AddRunNumber(137430);
plugin->AddRunNumber(137366);
plugin->AddRunNumber(137243);
plugin->AddRunNumber(137236);
plugin->AddRunNumber(137235);
plugin->AddRunNumber(137232);
plugin->AddRunNumber(137231);
plugin->AddRunNumber(137162);
plugin->AddRunNumber(137161);
}
else{
stderr<<"BUNCH NOT THERE"<<endl;
return NULL;
}
//plugin->AddRunList("139510, 139507, 139505, 139503, 139465, 139438, 139437, 139360, 139329, 139328, 139314, 139310, 139309, 139173, 139107, 139105, 139038, 139037, 139036, 139029, 139028, 138872, 138871, 138870, 138837, 138732, 138730, 138666, 138662, 138653, 138652, 138638, 138624, 138621, 138583, 138582, 138579, 138578, 138534, 138469, 138442, 138439, 138438, 138396, 138364, 138275, 138225, 138201, 138197, 138192, 138190, 137848, 137844, 137752, 137751, 137724, 137722, 137718, 137704, 137693, 137692, 137691, 137686, 137685, 137639, 137638, 137608, 137595, 137549, 137546, 137544, 137541, 137539, 137531, 137530, 137443, 137441, 137440, 137439, 137434, 137432, 137431, 137430, 137366, 137243, 137236, 137235, 137232, 137231, 137162, 137161");
plugin->SetNrunsPerMaster(1);
plugin->SetOutputToRunNo();
// comment out the next line when using the "terminate" option, unless
// you want separate merged files for each run
plugin->SetMergeViaJDL();
// Method 2: Declare existing data files (raw collections, xml collections, root file)
// If no path mentioned data is supposed to be in the work directory (see SetGridWorkingDir())
// XML collections added via this method can be combined with the first method if
// the content is compatible (using or not tags)
// plugin->AddDataFile("tag.xml");
// plugin->AddDataFile("/alice/data/2008/LHC08c/000057657/raw/Run57657.Merged.RAW.tag.root");
// Define alien work directory where all files will be copied. Relative to alien $HOME.
plugin->SetGridWorkingDir(taskname);
// Declare alien output directory. Relative to working directory.
plugin->SetGridOutputDir("out"); // In this case will be $HOME/taskname/out
// Declare the analysis source files names separated by blancs. To be compiled runtime
// using ACLiC on the worker nodes.
plugin->SetAnalysisSource("AliBalance.cxx AliAnalysisTaskBF.cxx");
// Declare all libraries (other than the default ones for the framework. These will be
// loaded by the generated analysis macro. Add all extra files (task .cxx/.h) here.
//plugin->AddIncludePath("-I.");
//plugin->SetAdditionalLibs("libPWGCFebye.so");
plugin->SetAdditionalLibs("AliBalance.cxx AliBalance.h AliAnalysisTaskBF.cxx AliAnalysisTaskBF.h");
// Declare the output file names separated by blancs.
// (can be like: file.root or file.root@ALICE::Niham::File)
// To only save certain files, use SetDefaultOutputs(kFALSE), and then
// SetOutputFiles("list.root other.filename") to choose which files to save
plugin->SetDefaultOutputs();
//plugin->SetOutputFiles("list.root");
// Optionally set a name for the generated analysis macro (default MyAnalysis.C)
plugin->SetAnalysisMacro(Form("%s.C",taskname));
// Optionally set maximum number of input files/subjob (default 100, put 0 to ignore)
plugin->SetSplitMaxInputFileNumber(100);
// Optionally modify the executable name (default analysis.sh)
plugin->SetExecutable(Form("%s.sh",taskname));
// set number of test files to use in "test" mode
plugin->SetNtestFiles(1);
// Optionally resubmit threshold.
plugin->SetMasterResubmitThreshold(90);
// Optionally set time to live (default 30000 sec)
plugin->SetTTL(90000);
// Optionally set input format (default xml-single)
plugin->SetInputFormat("xml-single");
// Optionally modify the name of the generated JDL (default analysis.jdl)
plugin->SetJDLName(Form("%s.jdl",taskname));
// Optionally modify job price (default 1)
plugin->SetPrice(1);
// Optionally modify split mode (default 'se')
plugin->SetSplitMode("se");
//plugin->SetUseSubmitPolicy();
//plugin->SetKeepLogs();
//----------------------------------------------------------
//--- PROOF MODE SPECIFIC SETTINGS ------------
//----------------------------------------------------------
// Proof cluster
plugin->SetProofCluster(proofcluster);
// Dataset to be used
plugin->SetProofDataSet(proofdataset);
// May need to reset proof. Supported modes: 0-no reset, 1-soft, 2-hard
plugin->SetProofReset(0);
// May limit number of workers
plugin->SetNproofWorkers(0);
// May limit the number of workers per slave
plugin->SetNproofWorkersPerSlave(1);
// May use a specific version of root installed in proof
plugin->SetRootVersionForProof("current");
// May set the aliroot mode. Check http://aaf.cern.ch/node/83
plugin->SetAliRootMode("default"); // Loads AF libs by default
// May request ClearPackages (individual ClearPackage not supported)
plugin->SetClearPackages(kFALSE);
// Plugin test mode works only providing a file containing test file locations, used in "local" mode also
plugin->SetFileForTestMode("files.txt"); // file should contain path name to a local directory containg *ESDs.root etc
// Request connection to alien upon connection to grid
plugin->SetProofConnectGrid(kFALSE);
plugin->Print();
return plugin;
}
AliAnalysisGrid* CreateAlienHandler(const char* mode = "offline")
{
//if (!AliAnalysisGrid::CreateToken()) return NULL;
AliAnalysisAlien *plugin = new AliAnalysisAlien();
plugin->SetRunMode(mode); // "full", "test", "offline", "submit" or "terminate"
plugin->SetMergeViaJDL(kTRUE);
plugin->SetOneStageMerging(kFALSE);
plugin->SetMaxMergeStages(2);
plugin->SetAPIVersion("V1.1x");
plugin->SetROOTVersion("v5-30-03");
plugin->SetAliROOTVersion("v5-02-16-AN");
// add data through aliensh find procedure.
//plugin->SetGridDataDir("/alice/sim/LHC11d2/");
plugin->SetGridDataDir("/alice/data/2011/LHC11e");
//plugin->SetDataPattern("*pass1/*ESDs.root");
//plugin->SetDataPattern("*tag.root");
//plugin->SetDataPattern("*pass1/*tag.root");
plugin->SetDataPattern("*AOD.root");
//plugin->AddRunNumber(119161);
//plugin->AddRunNumber("000162740");
//plugin->AddRunNumber("000161585");
plugin->AddRunNumber("000162644");
// Method 2: Declare existing data files
//plugin->AddDataFile("tag.xml");
// plugin->AddDataFile("/alice/data/2008/LHC08c/000057657/raw/Run57657.Merged.RAW.tag.root");
plugin->SetGridWorkingDir("eta");
plugin->SetGridOutputDir("output"); // In this case will be $HOME/work/output
// TString source = "";
// source += "EtaCandidate.cxx ";
// source += "EtaPriCandidate.cxx ";
// source += "EtaConfig.cxx ";
// source += "EtaOutput.cxx ";
// source += "EtaAnalysis.cxx ";
// source += "EtaTask.cxx ";
// plugin->SetAnalysisSource(source);
plugin->SetAnalysisSource("EtaCandidate.cxx EtaPriCandidate.cxx EtaConfig.cxx EtaOutput.cxx EtaAnalysis.cxx EtaTask.cxx");
// TString libs = source;
// libs += "EtaCandidate.h ";
// libs += " EtaPriCandidate.h";
// libs += " EtaConfig.h";
// libs += " EtaOutput.h";
// libs += " EtaAnalysis.h";
// libs += " EtaTask.h";
// plugin->SetAdditionalLibs(libs);
plugin->SetAdditionalLibs("EtaCandidate.h EtaCandidate.cxx EtaPriCandidate.h EtaPriCandidate.cxx EtaConfig.h EtaConfig.cxx EtaOutput.h EtaOutput.cxx EtaAnalysis.h EtaAnalysis.cxx EtaTask.h EtaTask.cxx");
plugin->SetDefaultOutputs(kTRUE);
//plugin->SetDefaultOutputs(kFALSE);
//plugin->SetOutputFiles("eta.output.ESD.root EventStat_temp.root");
// Optionally define the files to be archived.
// plugin->SetOutputArchive("log_archive.zip:stdout,stderr@ALICE::NIHAM::File root_archive.zip:*.root@ALICE::NIHAM::File");
// plugin->SetOutputArchive("log_archive.zip:stdout,stderr");
// Optionally set a name for the generated analysis macro (default MyAnalysis.C)
plugin->SetAnalysisMacro("EtaAnalysis.C");
plugin->SetExecutable("runEtaAnalysis.sh");
plugin->SetJDLName("EtaAnalysis.jdl");
plugin->SetSplitMaxInputFileNumber(100);
plugin->SetMaxInitFailed(5);
plugin->SetMasterResubmitThreshold(90);
plugin->SetTTL(43200);
plugin->SetInputFormat("xml-single");
plugin->SetPrice(1);
plugin->SetSplitMode("se");
return plugin;
}