///
/// Configure the task doing the trigger particle hadron correlation
///
AliAnaParticleIsolation* ConfigureIsolationAnalysis(TString particle , TString calorimeter , Bool_t caloType,
TString collision , TString containerName,
Bool_t simulation, Int_t year , Int_t debugLevel)
{
AliAnaParticleIsolation *ana = new AliAnaParticleIsolation();
ana->SetDebug(debugLevel);
//if(collision.Contains("Pb")) ana->SwitchOnFillHighMultiplicityHistograms();
ana->SetMinPt(5);
ana->SwitchOffStudyTracksInCone() ;
ana->SwitchOnUEBandSubtractionHistoFill();
ana->SwitchOffDecayTaggedHistoFill() ;
ana->SwitchOnSSHistoFill();
ana->SwitchOffLeadingOnly();
ana->SwitchOffCheckNeutralClustersForLeading();
ana->SwitchOffPtTrigBinHistoFill();
ana->SwitchOffBackgroundBinHistoFill();
ana->SwitchOffTMHistoFill();
// MC
ana->SwitchOffPrimariesInConeSelection();
ana->SwitchOffPrimariesPi0DecayStudy() ;
ana->SwitchOnRealCaloAcceptance();
ana->SwitchOnFiducialCut();
if(calorimeter == "EMCAL" && caloType == 0)
{
// Avoid borders of EMCal
ana->GetFiducialCut()->SetSimpleEMCALFiducialCut(0.60, 86, 174) ;
}
if(calorimeter == "EMCAL" && caloType == 1)
{
// Avoid borders of DCal
ana->GetFiducialCut()->SetSimpleEMCALFiducialCut(0.60, 264, 316) ;
}
AliCaloPID* caloPID = ana->GetCaloPID();
caloPID->SetEMCALDEtaCut(0.025);
caloPID->SetEMCALDPhiCut(0.030);
ana->SwitchOffSeveralIsolation() ;
ana->SwitchOffReIsolation();
//
// Do settings for main isolation cut class
//
AliIsolationCut * ic = ana->GetIsolationCut();
ic->SetDebug(debugLevel);
ic->SetParticleTypeInCone(AliIsolationCut::kNeutralAndCharged);
ic->SetICMethod(AliIsolationCut::kSumPtIC);
if ( collision == "pp" || collision == "pPb" )
{
ic->SetPtThreshold(0.5);
ic->SetSumPtThreshold(2.0) ;
ic->SetConeSize(0.4);
}
if ( collision == "PbPb" )
{
ic->SetPtThreshold(3.);
ic->SetSumPtThreshold(3.0) ;
ic->SetConeSize(0.3);
}
// Input / output delta AOD settings
ana->SetInputAODName(Form("%s%s_Calo%d",particle.Data(),containerName.Data(),caloType));
ana->SetAODObjArrayName(Form("%sIso_%s_Calo%d",particle.Data(),containerName.Data(),caloType));
// Set Histograms name tag, bins and ranges
ana->AddToHistogramsName(Form("AnaIsol%s_Calo%d_",particle.Data(),caloType));
SetHistoRangeAndNBins(ana->GetHistogramRanges(),calorimeter,caloType,collision,year); // see method below
if(simulation) ana->SwitchOnDataMC();
if(debugLevel > 0) ana->Print("");
return ana;
}
AliAnalysisTaskParticleCorrelation *AddTaskPartCorr(TString inputDataType, TString calorimeter, Bool_t kPrintSettings = kFALSE,Bool_t kSimulation = kFALSE, Bool_t outputAOD=kFALSE, Bool_t oldAOD=kFALSE, Int_t debugLevel = 0)
{
// Creates a PartCorr task, configures it and adds it to the analysis manager.
// Get the pointer to the existing analysis manager via the static access method.
//==============================================================================
AliAnalysisManager *mgr = AliAnalysisManager::GetAnalysisManager();
if (!mgr) {
::Error("AddTaskPartCorr", "No analysis manager to connect to.");
return NULL;
}
Bool_t kUseKinematics = kFALSE;
if(kSimulation) {
kUseKinematics = (mgr->GetMCtruthEventHandler())?kTRUE:kFALSE;
if (!kUseKinematics && inputDataType == "AOD") kUseKinematics = kTRUE; //AOD primary should be available ...
}
cout<<"********* ACCESS KINE? "<<kUseKinematics<<endl;
// Configure analysis
//===========================================================================
// *** Reader ***
AliCaloTrackReader * reader =0x0 ;
if(inputDataType.Contains("AOD")) reader = new AliCaloTrackAODReader();
else if(inputDataType=="ESD") reader = new AliCaloTrackESDReader();
else if(inputDataType=="MC" && inputDataType == "ESD") reader = new AliCaloTrackMCReader();
reader->SetDebug(-1);//10 for lots of messages
reader->SwitchOnCTS();
reader->SwitchOffEMCAL();
reader->SwitchOffPHOS();
reader->SwitchOffEMCALCells();
reader->SwitchOffPHOSCells();
reader->SetDataType(2);
//Min particle pT
reader->SetEMCALPtMin(0.3);
reader->SetPHOSPtMin(0.3);
reader->SetCTSPtMin(0.1);
reader->SwitchOnWriteDeltaAOD() ;
// if(oldAOD) reader->SwitchOnOldAODs();
reader->SwitchOnWriteDeltaAOD();
if(kPrintSettings) reader->Print("");
// *** Calorimeters Utils ***
AliCalorimeterUtils *cu = new AliCalorimeterUtils;
//Recalibration
//cu->SwitchOnRecalibration();
//TFile * f = new TFile("RecalibrationFactors.root","read");
//cu->SetEMCALChannelRecalibrationFactors(0,(TH2F*)f->Get("EMCALRecalFactors_SM0"));
//cu->SetEMCALChannelRecalibrationFactors(1,(TH2F*)f->Get("EMCALRecalFactors_SM1"));
//cu->SetEMCALChannelRecalibrationFactors(2,(TH2F*)f->Get("EMCALRecalFactors_SM2"));
//cu->SetEMCALChannelRecalibrationFactors(3,(TH2F*)f->Get("EMCALRecalFactors_SM3"));
//f->Close();
cu->SetDebug(debugLevel);
if(kPrintSettings) cu->Print("");
// ##### Analysis algorithm settings ####
//==================================
// ### Isolation analysis ###
//=================================
//Photon
AliAnaParticleIsolation *anaisol = new AliAnaParticleIsolation();
anaisol->SetDebug(debugLevel);
anaisol->SetMinPt(0);
anaisol->SetInputAODName("ConversionGamma");
anaisol->SetAODObjArrayName("ConversionGamma");
anaisol->SetCalorimeter("CTS");
if(kUseKinematics) anaisol->SwitchOnDataMC() ;//Access MC stack and fill more histograms
else anaisol->SwitchOffDataMC() ;
anaisol->SwitchOffInvariantMass();
AliIsolationCut * ic = anaisol->GetIsolationCut();
ic->SetConeSize(0.4);
ic->SetPtThreshold(0.7);
ic->SetPtFraction(0.1);
ic->SetSumPtThreshold(1.0) ;
ic->SetParticleTypeInCone(AliIsolationCut::kOnlyCharged);
ic->SetICMethod(AliIsolationCut::kSumPtFracIC);
if(kPrintSettings) ic->Print("");
anaisol->SetHistoPtRangeAndNBins(0, 50, 500) ;
anaisol->AddToHistogramsName("AnaIsolPhoton_");
anaisol->SetOutputAODClassName("AliAODPWG4ParticleCorrelation");
anaisol->SwitchOnReIsolation();
anaisol->SwitchOffSeveralIsolation();
// anaisol->SetPtThresholds(0, 1.0);
// anaisol->SetPtThresholds(1, 2.0);
// anaisol->SetPtThresholds(2, 3.0);
// anaisol->SetPtThresholds(3, 4.0);
// anaisol->SetPtThresholds(4, 5.0);
// anaisol->SetPtFractions(0, 0.4);
// anaisol->SetPtFractions(1, 0.3);
// anaisol->SetPtFractions(2, 0.1);
// anaisol->SetPtFractions(3, 0.08);
// anaisol->SetPtFractions(4, 0.05);
// anaisol->SetNCones(5);
// anaisol->SetConeSizes(0, 0.50);
// anaisol->SetConeSizes(1, 0.60);
// anaisol->SetConeSizes(2, 0.70);
// anaisol->SetConeSizes(3, 0.80);
// anaisol->SetConeSizes(4, 0.90);
if(kPrintSettings) anaisol->Print("");
// //===========================
// //Correlation analysis
// //===========================
// // ### Correlation with Jet Finder AOD output
// AliAnaParticleJetFinderCorrelation *anacorrjet = new AliAnaParticleJetFinderCorrelation();
// anacorrjet->SetInputAODName("ConversionGamma");//,calorimeter.Data()));
// anacorrjet->SwitchOffFiducialCut();
// anacorrjet->SetDebug(debugLevel);
// anacorrjet->SetConeSize(1);
// anacorrjet->SelectIsolated(kTRUE); // do correlation with isolated photons
// anacorrjet->SetPtThresholdInCone(0.2);
// anacorrjet->SetDeltaPhiCutRange(0.5,5.5);//Mostly Open Cuts
// anacorrjet->SetRatioCutRange(0.01,3); //Mostly Open Cuts
// anacorrjet->UseJetRefTracks(kFALSE); //Not working now
// //Set Histograms bins and ranges
// anacorrjet->SetHistoPtRangeAndNBins(0, 50, 200) ;
// // ana->SetHistoPhiRangeAndNBins(0, TMath::TwoPi(), 100) ;
// // ana->SetHistoEtaRangeAndNBins(-0.7, 0.7, 100) ;
// if(kPrintSettings) anacorrjet->Print("");
// #### Configure Maker ####
AliAnaPartCorrMaker * maker = new AliAnaPartCorrMaker();
maker->SetReader(reader);//pointer to reader
maker->SetCaloUtils(cu); //pointer to calorimeter utils
Int_t n = 0;//Analysis number, order is important
maker->AddAnalysis(anaisol,n++);
//maker->AddAnalysis(anacorrjet, n++);
maker->SetAnaDebug(-1);
maker->SwitchOnHistogramsMaker() ;
if(kPrintSettings) maker->Print("");
printf("======================== \n");
printf(" End Configuration of PartCorr analysis with detector %s \n",calorimeter.Data());
printf("======================== \n");
// Create task
//===========================================================================
AliAnalysisTaskParticleCorrelation * task = new AliAnalysisTaskParticleCorrelation (Form("PartCorr%s",calorimeter.Data()));
task->SetConfigFileName(""); //Don't configure the analysis via configuration file.
task->SetDebugLevel(debugLevel);
task->SetAnalysisMaker(maker);
if(inputDataType=="ESD" && !kSimulation) task->SelectCollisionCandidates(); //AliPhysicsSelection has to be attached before.
mgr->AddTask(task);
//Create containers
char name[128];
sprintf(name,"PartCorr_%s",calorimeter.Data());
cout<<"Name of task "<<name<<endl;
TString outputfile = AliAnalysisManager::GetCommonFileName();
AliAnalysisDataContainer *cout_pc = mgr->CreateContainer(calorimeter.Data(), TList::Class(),
AliAnalysisManager::kOutputContainer,
Form("%s:PartCorr",outputfile.Data()));
AliAnalysisDataContainer *cout_cuts = mgr->CreateContainer(Form("%sCuts",calorimeter.Data()), TList::Class(),
AliAnalysisManager::kParamContainer,
Form("%s:PartCorrCuts",outputfile.Data()));
// Create ONLY the output containers for the data produced by the task.
// Get and connect other common input/output containers via the manager as below
//==============================================================================
mgr->ConnectInput (task, 0, mgr->GetCommonInputContainer());
// AOD output slot will be used in a different way in future
if(!inputDataType.Contains("delta") && outputAOD) mgr->ConnectOutput (task, 0, mgr->GetCommonOutputContainer());
mgr->ConnectOutput (task, 1, cout_pc);
mgr->ConnectOutput (task, 2, cout_cuts);
return task;
}