void Config()
{
// 7-DEC-2000 09:00
// Switch on Transition Radiation simulation. 6/12/00 18:00
// iZDC=1 7/12/00 09:00
// ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
// Theta range given through pseudorapidity limits 22/6/2001
// Set Random Number seed
// gRandom->SetSeed(12345);
// libraries required by geant321
gSystem->Load("libgeant321");
new TGeant3("C++ Interface to Geant3");
if (!gSystem->Getenv("CONFIG_FILE"))
{
TFile *rootfile = new TFile("galice.root", "recreate");
rootfile->SetCompressionLevel(2);
}
TGeant3 *geant3 = (TGeant3 *) gMC;
//
// Set External decayer
TVirtualMCDecayer *decayer = new AliDecayerPythia();
decayer->SetForceDecay(kAll);
decayer->Init();
gMC->SetExternalDecayer(decayer);
//
//
//=======================================================================
// ******* GEANT STEERING parameters FOR ALICE SIMULATION *******
geant3->SetTRIG(1); //Number of events to be processed
geant3->SetSWIT(4, 1);
geant3->SetDEBU(0, 0, 1);
//geant3->SetSWIT(2,2);
geant3->SetDCAY(1);
geant3->SetPAIR(1);
geant3->SetCOMP(1);
geant3->SetPHOT(1);
geant3->SetPFIS(0);
geant3->SetDRAY(0);
geant3->SetANNI(1);
geant3->SetBREM(1);
geant3->SetMUNU(1);
geant3->SetCKOV(1);
geant3->SetHADR(1); //Select pure GEANH (HADR 1) or GEANH/NUCRIN (HADR 3)
geant3->SetLOSS(2);
geant3->SetMULS(1);
geant3->SetRAYL(1);
geant3->SetAUTO(1); //Select automatic STMIN etc... calc. (AUTO 1) or manual (AUTO 0)
geant3->SetABAN(0); //Restore 3.16 behaviour for abandoned tracks
geant3->SetOPTI(2); //Select optimisation level for GEANT geometry searches (0,1,2)
geant3->SetERAN(5.e-7);
Float_t cut = 1.e-3; // 1MeV cut by default
Float_t tofmax = 1.e10;
// GAM ELEC NHAD CHAD MUON EBREM MUHAB EDEL MUDEL MUPA TOFMAX
geant3->SetCUTS(cut, cut, cut, cut, cut, cut, cut, cut, cut, cut,
tofmax);
//
//=======================================================================
// ************* STEERING parameters FOR ALICE SIMULATION **************
// --- Specify event type to be tracked through the ALICE setup
// --- All positions are in cm, angles in degrees, and P and E in GeV
Int_t process=1;
GenTPHIC(process);
//
// Activate this line if you want the vertex smearing to happen
// track by track
//
//gener->SetVertexSmear(perTrack);
// Field (L3 0.4 T)
TGeoGlobalMagField::Instance()->SetField(new AliMagF("Maps","Maps", 1., 1., AliMagF::k5kG));
rootfile->cd();
Int_t iABSO = 0;
Int_t iDIPO = 0;
Int_t iFMD = 0;
Int_t iFRAME = 0;
Int_t iHALL = 0;
Int_t iITS = 0;
Int_t iMAG = 0;
Int_t iMUON = 0;
Int_t iPHOS = 0;
Int_t iPIPE = 0;
Int_t iPMD = 0;
Int_t iHMPID = 0;
Int_t iSHIL = 0;
Int_t iT0 = 0;
Int_t iTOF = 0;
Int_t iTPC = 0;
Int_t iTRD = 0;
Int_t iZDC = 0;
Int_t iEMCAL = 0;
Int_t iACORDE = 0;
Int_t iVZERO = 0;
//=================== Alice BODY parameters =============================
AliBODY *BODY = new AliBODY("BODY", "Alice envelop");
if (iMAG)
{
//=================== MAG parameters ============================
// --- Start with Magnet since detector layouts may be depending ---
// --- on the selected Magnet dimensions ---
AliMAG *MAG = new AliMAG("MAG", "Magnet");
}
if (iABSO)
{
//=================== ABSO parameters ============================
AliABSO *ABSO = new AliABSOv0("ABSO", "Muon Absorber");
}
if (iDIPO)
{
//=================== DIPO parameters ============================
AliDIPO *DIPO = new AliDIPOv2("DIPO", "Dipole version 2");
}
if (iHALL)
{
//=================== HALL parameters ============================
AliHALL *HALL = new AliHALL("HALL", "Alice Hall");
}
if (iFRAME)
{
//=================== FRAME parameters ============================
AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
if (geo == kHoles) {
FRAME->SetHoles(1);
} else {
FRAME->SetHoles(0);
}
}
if (iSHIL)
{
//=================== SHIL parameters ============================
AliSHIL *SHIL = new AliSHILv2("SHIL", "Shielding Version 2");
}
if (iPIPE)
{
//=================== PIPE parameters ============================
AliPIPE *PIPE = new AliPIPEv0("PIPE", "Beam Pipe");
}
if(iITS) {
//=================== ITS parameters ============================
//
// As the innermost detector in ALICE, the Inner Tracking System "impacts" on
// almost all other detectors. This involves the fact that the ITS geometry
// still has several options to be followed in parallel in order to determine
// the best set-up which minimizes the induced background. All the geometries
// available to date are described in the following. Read carefully the comments
// and use the default version (the only one uncommented) unless you are making
// comparisons and you know what you are doing. In this case just uncomment the
// ITS geometry you want to use and run Aliroot.
//
// Detailed geometries:
//
//
//AliITS *ITS = new AliITSv5symm("ITS","Updated ITS TDR detailed version with symmetric services");
//
//AliITS *ITS = new AliITSv5asymm("ITS","Updates ITS TDR detailed version with asymmetric services");
//
AliITSvPPRasymm *ITS = new AliITSvPPRasymm("ITS","New ITS PPR detailed version with asymmetric services");
ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer
// ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det"); // don't touch this parameter if you're not an ITS developer
ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [100,300]
ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [100,300]
ITS->SetThicknessChip1(200.); // chip thickness on layer 1 must be in the range [150,300]
ITS->SetThicknessChip2(200.); // chip thickness on layer 2 must be in the range [150,300]
ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
//
//AliITSvPPRsymm *ITS = new AliITSvPPRsymm("ITS","New ITS PPR detailed version with symmetric services");
//ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
//ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer
//ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRsymm2.det"); // don't touch this parameter if you're not an ITS developer
//ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [100,300]
//ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [100,300]
//ITS->SetThicknessChip1(200.); // chip thickness on layer 1 must be in the range [150,300]
//ITS->SetThicknessChip2(200.); // chip thickness on layer 2 must be in the range [150,300]
//ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
//ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
//
//
// Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful
// for reconstruction !):
//
//
//AliITSvPPRcoarseasymm *ITS = new AliITSvPPRcoarseasymm("ITS","New ITS PPR coarse version with asymmetric services");
//ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
//ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
//
//AliITS *ITS = new AliITSvPPRcoarsesymm("ITS","New ITS PPR coarse version with symmetric services");
//ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
//ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
//
//
//
// Geant3 <-> EUCLID conversion
// ============================
//
// SetEUCLID is a flag to output (=1) or not to output (=0) both geometry and
// media to two ASCII files (called by default ITSgeometry.euc and
// ITSgeometry.tme) in a format understandable to the CAD system EUCLID.
// The default (=0) means that you dont want to use this facility.
//
ITS->SetEUCLID(0);
}
if (iTPC)
{
//============================ TPC parameters ================================
// --- This allows the user to specify sectors for the SLOW (TPC geometry 2)
// --- Simulator. SecAL (SecAU) <0 means that ALL lower (upper)
// --- sectors are specified, any value other than that requires at least one
// --- sector (lower or upper)to be specified!
// --- Reminder: sectors 1-24 are lower sectors (1-12 -> z>0, 13-24 -> z<0)
// --- sectors 25-72 are the upper ones (25-48 -> z>0, 49-72 -> z<0)
// --- SecLows - number of lower sectors specified (up to 6)
// --- SecUps - number of upper sectors specified (up to 12)
// --- Sens - sensitive strips for the Slow Simulator !!!
// --- This does NOT work if all S or L-sectors are specified, i.e.
// --- if SecAL or SecAU < 0
//
//
//-----------------------------------------------------------------------------
// gROOT->LoadMacro("SetTPCParam.C");
// AliTPCParam *param = SetTPCParam();
AliTPC *TPC = new AliTPCv2("TPC", "Default");
// All sectors included
TPC->SetSecAL(-1);
TPC->SetSecAU(-1);
}
if (iTOF) {
if (geo == kHoles) {
//=================== TOF parameters ============================
AliTOF *TOF = new AliTOFv2FHoles("TOF", "TOF with Holes");
} else {
AliTOF *TOF = new AliTOFv4T0("TOF", "normal TOF");
}
}
if (iHMPID)
{
//=================== HMPID parameters ===========================
AliHMPID *HMPID = new AliHMPIDv3("HMPID", "normal HMPID");
}
if (iZDC)
{
//=================== ZDC parameters ============================
AliZDC *ZDC = new AliZDCv2("ZDC", "normal ZDC");
}
if (iTRD)
{
//=================== TRD parameters ============================
AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
// Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe + 10% CO2)
TRD->SetGasMix(1);
if (geo == kHoles) {
// With hole in front of PHOS
TRD->SetPHOShole();
// With hole in front of HMPID
TRD->SetHMPIDhole();
}
// Switch on TR
AliTRDsim *TRDsim = TRD->CreateTR();
}
if (iFMD)
{
//=================== FMD parameters ============================
AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
FMD->SetRingsSi1(256);
FMD->SetRingsSi2(128);
FMD->SetSectorsSi1(20);
FMD->SetSectorsSi2(40);
}
if (iMUON)
{
//=================== MUON parameters ===========================
AliMUON *MUON = new AliMUONv1("MUON", "default");
}
//=================== PHOS parameters ===========================
if (iPHOS)
{
AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
}
if (iPMD)
{
//=================== PMD parameters ============================
AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
}
if (iT0)
{
//=================== T0 parameters ============================
AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
}
if (iEMCAL)
{
//=================== EMCAL parameters ============================
AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "EMCAL_COMPLETE");
}
if (iACORDE)
{
//=================== ACORDE parameters ============================
AliACORDE *ACORDE = new AliACORDEv1("ACORDE", "normal ACORDE");
}
if (iVZERO)
{
//=================== ACORDE parameters ============================
AliVZERO *VZERO = new AliVZEROv2("VZERO", "normal VZERO");
}
}
void
DetectorInit(Int_t tag)
{
/*
* DetectorInit
* initialise the detectors to the default
* configuration automatically according to year/period
*
*/
Int_t year = atoi(gSystem->Getenv("CONFIG_YEAR"));
//=================== Alice BODY parameters =============================
AliBODY *BODY = new AliBODY("BODY", "Alice envelop");
if (iMAG)
{
//=================== MAG parameters ============================
// --- Start with Magnet since detector layouts may be depending ---
// --- on the selected Magnet dimensions ---
AliMAG *MAG = new AliMAG("MAG", "Magnet");
}
if (iABSO)
{
//=================== ABSO parameters ============================
AliABSO *ABSO = new AliABSOv3("ABSO", "Muon Absorber");
}
if (iDIPO)
{
//=================== DIPO parameters ============================
AliDIPO *DIPO = new AliDIPOv3("DIPO", "Dipole version 3");
}
if (iHALL)
{
//=================== HALL parameters ============================
AliHALL *HALL = new AliHALLv3("HALL", "Alice Hall");
}
if (iFRAME)
{
//=================== FRAME parameters ============================
if (year < 2015) {
AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
FRAME->SetHoles(1);
}
else {
AliFRAMEv3 *FRAME = new AliFRAMEv3("FRAME", "Space Frame");
FRAME->SetHoles(1);
}
}
if (iSHIL)
{
//=================== SHIL parameters ============================
AliSHIL *SHIL = new AliSHILv3("SHIL", "Shielding Version 3");
}
if (iPIPE)
{
//=================== PIPE parameters ============================
AliPIPE *PIPE = new AliPIPEv3("PIPE", "Beam Pipe");
}
if (iITS)
{
//=================== ITS parameters ============================
AliITS *ITS = new AliITSv11("ITS","ITS v11");
if( tag == kDetectorPhosOnly)
ITS->DisableStepManager();
}
if (iTPC)
{
//============================ TPC parameters =====================
AliTPC *TPC = new AliTPCv2("TPC", "Default");
if (isGeant4)
TPC->SetPrimaryIonisation(1);
if( tag == kDetectorPhosOnly)
TPC->DisableStepManager();
}
if (iTOF) {
//=================== TOF parameters ============================
AliTOF *TOF = new AliTOFv6T0("TOF", "normal TOF");
if( tag == kDetectorPhosOnly)
TOF->DisableStepManager();
}
if (iHMPID)
{
//=================== HMPID parameters ===========================
AliHMPID *HMPID = new AliHMPIDv3("HMPID", "normal HMPID");
if( tag == kDetectorPhosOnly)
HMPID->DisableStepManager();
}
if (iZDC)
{
//=================== ZDC parameters ============================
if (year == 2010) {
AliZDC *ZDC = new AliZDCv3("ZDC", "normal ZDC");
ZDC->SetSpectatorsTrack();
ZDC->SetLumiLength(0.);
}
else if (year < 2015) {
AliZDC *ZDC = new AliZDCv3("ZDC", "normal ZDC");
//Collimators aperture
ZDC->SetVCollSideCAperture(0.85);
ZDC->SetVCollSideCCentre(0.);
ZDC->SetVCollSideAAperture(0.75);
ZDC->SetVCollSideACentre(0.);
//Detector position
ZDC->SetYZNC(1.6);
ZDC->SetYZNA(1.6);
ZDC->SetYZPC(1.6);
ZDC->SetYZPA(1.6);
}
else {
AliZDC *ZDC = new AliZDCv4("ZDC", "normal ZDC");
ZDC->SetLumiLength(0.);
ZDC->SetVCollSideCAperture(2.8);
ZDC->SetVCollSideCApertureNeg(2.8);
}
if( tag == kDetectorPhosOnly)
ZDC->DisableStepManager();
}
if (iTRD)
{
//=================== TRD parameters ============================
if (isGeant4) {
AliTRDtestG4 *TRD = new AliTRDtestG4("TRD", "TRD slow simulator");
TRD->SetScaleG4(1.11);
}
else
AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
AliTRDgeometry *geoTRD = TRD->GetGeometry();
// Partial geometry: modules at 0,1,7,8,9,16,17
// starting at 3h in positive direction
if ((year == 2010) || (year == 2009)) {
geoTRD->SetSMstatus(2,0);
geoTRD->SetSMstatus(3,0);
geoTRD->SetSMstatus(4,0);
geoTRD->SetSMstatus(5,0);
geoTRD->SetSMstatus(6,0);
geoTRD->SetSMstatus(11,0);
geoTRD->SetSMstatus(12,0);
geoTRD->SetSMstatus(13,0);
geoTRD->SetSMstatus(14,0);
geoTRD->SetSMstatus(15,0);
geoTRD->SetSMstatus(16,0);
}
else if (year == 2011) {
geoTRD->SetSMstatus(2,0);
geoTRD->SetSMstatus(3,0);
geoTRD->SetSMstatus(4,0);
geoTRD->SetSMstatus(5,0);
geoTRD->SetSMstatus(6,0);
geoTRD->SetSMstatus(12,0);
geoTRD->SetSMstatus(13,0);
geoTRD->SetSMstatus(14,0);
}
else if ((year == 2012) || (year ==2013)) {
geoTRD->SetSMstatus(4,0);
geoTRD->SetSMstatus(5,0);
geoTRD->SetSMstatus(12,0);
geoTRD->SetSMstatus(13,0);
geoTRD->SetSMstatus(14,0);
}
if( tag == kDetectorPhosOnly)
TRD->DisableStepManager();
}
if (iFMD)
{
//=================== FMD parameters ============================
AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
if( tag == kDetectorPhosOnly)
FMD->DisableStepManager();
}
if (iMUON)
{
//=================== MUON parameters ===========================
// New MUONv1 version (geometry defined via builders)
AliMUON *MUON = new AliMUONv1("MUON", "default");
// activate trigger efficiency by cells
MUON->SetTriggerEffCells(1); // backward compatibility
MUON->SetTriggerResponseV1(2); // backward compatibility
if( tag == kDetectorPhosOnly)
MUON->DisableStepManager();
}
if (iPHOS)
{
//=================== PHOS parameters ===========================
if (year < 2015) {
AliPHOS *PHOS = new AliPHOSv1("PHOS", "noCPV_Modules123");
}
else {
AliPHOS *PHOS = new AliPHOSv1("PHOS", "Run2");
}
}
if (iPMD)
{
//=================== PMD parameters ============================
AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
if( tag == kDetectorPhosOnly)
PMD->DisableStepManager();
}
if (iT0)
{
//=================== T0 parameters ============================
AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
if( tag == kDetectorPhosOnly)
T0->DisableStepManager();
}
if (iEMCAL)
{
//=================== EMCAL parameters ============================
AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "EMCAL_COMPLETE12SMV1_DCAL_8SM");
// by default Run2 configuration name but the proper geometry name is taken
// automatically depending on the anchor run
// 2010 - 4 SM, 2011 - 10 SM, 2012 - 12 SM, >2014 - 20 SM
if( tag == kDetectorPhosOnly)
EMCAL->DisableStepManager();
}
if (iACORDE)
{
//=================== ACORDE parameters ============================
AliACORDE *ACORDE = new AliACORDEv1("ACORDE", "normal ACORDE");
if( tag == kDetectorPhosOnly)
ACORDE->DisableStepManager();
}
if (iVZERO)
{
//=================== ACORDE parameters ============================
AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
if( tag == kDetectorPhosOnly)
VZERO->DisableStepManager();
}
if (iAD){
//=================== AD parameters ============================
AliAD *AD = new AliADv1("AD", "normal AD");
if( tag == kDetectorPhosOnly)
AD->DisableStepManager();
}
}
void Config()
{
// Get settings from environment variables
ProcessEnvironmentVars();
gRandom->SetSeed(seed);
cerr<<"Seed for random number generation= "<<seed<<endl;
// Libraries required by geant321
#if defined(__CINT__)
gSystem->Load("liblhapdf"); // Parton density functions
gSystem->Load("libEGPythia6"); // TGenerator interface
if (proc == kPythia6 || proc == kPhojet) {
gSystem->Load("libpythia6"); // Pythia 6.2
} else {
gSystem->Load("libpythia6.4.21"); // Pythia 6.4
}
gSystem->Load("libAliPythia6"); // ALICE specific implementations
// gSystem->Load("libgeant321");
#endif
// new TGeant3TGeo("C++ Interface to Geant3");
//=======================================================================
// Create the output file
AliRunLoader* rl=0x0;
cout<<"Config.C: Creating Run Loader ..."<<endl;
rl = AliRunLoader::Open("galice.root",
AliConfig::GetDefaultEventFolderName(),
"recreate");
if (rl == 0x0)
{
gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
return;
}
rl->SetCompressionLevel(2);
rl->SetNumberOfEventsPerFile(1000);
gAlice->SetRunLoader(rl);
// gAlice->SetGeometryFromFile("geometry.root");
// gAlice->SetGeometryFromCDB();
// Set the trigger configuration: proton-proton
AliSimulation::Instance()->SetTriggerConfig(pprTrigConfName[strig]);
cout <<"Trigger configuration is set to "<<pprTrigConfName[strig]<<endl;
rl->CdGAFile();
Int_t iABSO = 1;
Int_t iACORDE= 0;
Int_t iDIPO = 1;
Int_t iEMCAL = 1;
Int_t iFMD = 1;
Int_t iFRAME = 1;
Int_t iHALL = 1;
Int_t iITS = 1;
Int_t iMAG = 1;
Int_t iMUON = 1;
Int_t iPHOS = 1;
Int_t iPIPE = 1;
Int_t iPMD = 1;
Int_t iHMPID = 1;
Int_t iSHIL = 1;
Int_t iT0 = 1;
Int_t iTOF = 1;
Int_t iTPC = 1;
Int_t iTRD = 1;
Int_t iVZERO = 1;
Int_t iZDC = 1;
//=================== Alice BODY parameters =============================
AliBODY *BODY = new AliBODY("BODY", "Alice envelop");
if (iMAG)
{
//=================== MAG parameters ============================
// --- Start with Magnet since detector layouts may be depending ---
// --- on the selected Magnet dimensions ---
AliMAG *MAG = new AliMAG("MAG", "Magnet");
}
if (iABSO)
{
//=================== ABSO parameters ============================
AliABSO *ABSO = new AliABSOv3("ABSO", "Muon Absorber");
}
if (iDIPO)
{
//=================== DIPO parameters ============================
AliDIPO *DIPO = new AliDIPOv3("DIPO", "Dipole version 3");
}
if (iHALL)
{
//=================== HALL parameters ============================
AliHALL *HALL = new AliHALLv3("HALL", "Alice Hall");
}
if (iFRAME)
{
//=================== FRAME parameters ============================
AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
FRAME->SetHoles(1);
}
if (iSHIL)
{
//=================== SHIL parameters ============================
AliSHIL *SHIL = new AliSHILv3("SHIL", "Shielding Version 3");
}
if (iPIPE)
{
//=================== PIPE parameters ============================
AliPIPE *PIPE = new AliPIPEv3("PIPE", "Beam Pipe");
}
if (iITS)
{
//=================== ITS parameters ============================
AliITS *ITS = new AliITSv11("ITS","ITS v11");
}
if (iTPC)
{
//============================ TPC parameters =====================
AliTPC *TPC = new AliTPCv2("TPC", "Default");
TPC->SetPrimaryIonisation();// not used with Geant3
}
if (iTOF) {
//=================== TOF parameters ============================
AliTOF *TOF = new AliTOFv6T0("TOF", "normal TOF");
}
if (iHMPID)
{
//=================== HMPID parameters ===========================
AliHMPID *HMPID = new AliHMPIDv3("HMPID", "normal HMPID");
}
if (iZDC)
{
//=================== ZDC parameters ============================
AliZDC *ZDC = new AliZDCv4("ZDC", "normal ZDC");
//Collimators aperture
ZDC->SetVCollSideCAperture(0.85);
ZDC->SetVCollSideCCentre(0.);
ZDC->SetVCollSideAAperture(0.75);
ZDC->SetVCollSideACentre(0.);
//Detector position
ZDC->SetYZNC(1.6);
ZDC->SetYZNA(1.6);
ZDC->SetYZPC(1.6);
ZDC->SetYZPA(1.6);
}
if (iTRD)
{
//=================== TRD parameters ============================
AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
AliTRDgeometry *geoTRD = TRD->GetGeometry();
// Partial geometry: modules at 0,1,7,8,9,16,17
// starting at 3h in positive direction
geoTRD->SetSMstatus(2,0);
geoTRD->SetSMstatus(3,0);
geoTRD->SetSMstatus(4,0);
geoTRD->SetSMstatus(5,0);
geoTRD->SetSMstatus(6,0);
geoTRD->SetSMstatus(11,0);
geoTRD->SetSMstatus(12,0);
geoTRD->SetSMstatus(13,0);
geoTRD->SetSMstatus(14,0);
geoTRD->SetSMstatus(15,0);
geoTRD->SetSMstatus(16,0);
}
if (iFMD)
{
//=================== FMD parameters ============================
AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
}
if (iMUON)
{
//=================== MUON parameters ===========================
// New MUONv1 version (geometry defined via builders)
AliMUON *MUON = new AliMUONv1("MUON", "default");
// activate trigger efficiency by cells
MUON->SetTriggerEffCells(1);
}
if (iPHOS)
{
//=================== PHOS parameters ===========================
AliPHOS *PHOS = new AliPHOSv1("PHOS", "noCPV_Modules123");
}
if (iPMD)
{
//=================== PMD parameters ============================
AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
}
if (iT0)
{
//=================== T0 parameters ============================
AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
}
if (iEMCAL)
{
//=================== EMCAL parameters ============================
AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "EMCAL_FIRSTYEARV1");
}
if (iACORDE)
{
//=================== ACORDE parameters ============================
AliACORDE *ACORDE = new AliACORDEv1("ACORDE", "normal ACORDE");
}
if (iVZERO)
{
//=================== ACORDE parameters ============================
AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
}
// Load Geant4 + Geant4 VMC libraries
//
std::string g4libmacro("$G4VMCINSTALL/share/examples/macro/g4libs.C");
if (gClassTable->GetID("TGeant4") == -1) {
// Load Geant4 libraries
if (!gInterpreter->IsLoaded(g4libmacro.c_str())) {
gROOT->LoadMacro(g4libmacro.c_str());
gInterpreter->ProcessLine("g4libs()");
}
}
// Create Geant4 VMC
//
TGeant4 *geant4 = 0;
if ( ! gMC ) {
TG4RunConfiguration* runConfiguration=0x0;
for (Int_t iList = 0; iList < kListMax; iList++) {
if(iList<kListMax/2){
if(physicslist == iList){
runConfiguration =
new TG4RunConfiguration("geomRoot",
physicsListName[iList],
"specialCuts+stackPopper+stepLimiter",
true);
}
}
else if(iList>=kListMax/2){//add "optical" PL to HadronPhysicsList
if(physicslist == iList){
runConfiguration =
new TG4RunConfiguration("geomRoot",
Form("%s+optical",physicsListName[iList-kListMax/2]),
"specialCuts+stackPopper+stepLimiter",
true);
}
}
}
geant4 = new TGeant4("TGeant4", "The Geant4 Monte Carlo", runConfiguration);
cout << "Geant4 has been created." << endl;
}
else {
cout << "Monte Carlo has been already created." << endl;
}
// Customization of Geant4 VMC
//
geant4->ProcessGeantCommand("/mcVerbose/all 1");
geant4->ProcessGeantCommand("/mcVerbose/geometryManager 1");
geant4->ProcessGeantCommand("/mcVerbose/opGeometryManager 1");
geant4->ProcessGeantCommand("/mcTracking/loopVerbose 1");
geant4->ProcessGeantCommand("/mcPhysics/rangeCuts 0.01 mm");
// for Geant4 <= 9.4.p03
//geant4->ProcessGeantCommand("/mcPhysics/selectOpProcess Scintillation");
//geant4->ProcessGeantCommand("/mcPhysics/setOpProcessActivation false");
// for Geant4 >= 9.5
geant4->ProcessGeantCommand("/optics_engine/selectOpProcess Scintillation");
geant4->ProcessGeantCommand("/optics_engine/setOpProcessUse false");
geant4->ProcessGeantCommand("/optics_engine/selectOpProcess OpWLS");
geant4->ProcessGeantCommand("/optics_engine/setOpProcessUse false");
geant4->ProcessGeantCommand("/optics_engine/selectOpProcess OpMieHG");
geant4->ProcessGeantCommand("/optics_engine/setOpProcessUse false");
geant4->ProcessGeantCommand("/mcVerbose/composedPhysicsList 2");
geant4->ProcessGeantCommand("/mcTracking/skipNeutrino true");
// geant4->ProcessGeantCommand("/mcDet/setMaxStepInLowDensityMaterials 1 cm");
//
//=======================================================================
// ************* STEERING parameters FOR ALICE SIMULATION **************
// --- Specify event type to be tracked through the ALICE setup
// --- All positions are in cm, angles in degrees, and P and E in GeV
gMC->SetProcess("DCAY",1);
gMC->SetProcess("PAIR",1);
gMC->SetProcess("COMP",1);
gMC->SetProcess("PHOT",1);
gMC->SetProcess("PFIS",0);
gMC->SetProcess("DRAY",0);
gMC->SetProcess("ANNI",1);
gMC->SetProcess("BREM",1);
gMC->SetProcess("MUNU",1);
gMC->SetProcess("CKOV",1);
gMC->SetProcess("HADR",1);
gMC->SetProcess("LOSS",2);
gMC->SetProcess("MULS",1);
gMC->SetProcess("RAYL",1);
Float_t cut = 1.e-3; // 1MeV cut by default
Float_t tofmax = 1.e10;
gMC->SetCut("CUTGAM", cut);
gMC->SetCut("CUTELE", cut);
gMC->SetCut("CUTNEU", cut);
gMC->SetCut("CUTHAD", cut);
gMC->SetCut("CUTMUO", cut);
gMC->SetCut("BCUTE", cut);
gMC->SetCut("BCUTM", cut);
gMC->SetCut("DCUTE", cut);
gMC->SetCut("DCUTM", cut);
gMC->SetCut("PPCUTM", cut);
gMC->SetCut("TOFMAX", tofmax);
//======================//
// Set External decayer //
//======================//
TVirtualMCDecayer* decayer = new AliDecayerPythia();
decayer->SetForceDecay(kAll);
decayer->Init();
gMC->SetExternalDecayer(decayer);
//=========================//
// Generator Configuration //
//=========================//
AliGenerator* gener = 0x0;
if (proc == kPythia6) {
gener = MbPythia();
} else if (proc == kPythia6D6T) {
gener = MbPythiaTuneD6T();
} else if (proc == kPythia6ATLAS) {
gener = MbPythiaTuneATLAS();
} else if (proc == kPythiaPerugia0) {
gener = MbPythiaTunePerugia0();
} else if (proc == kPythia6ATLAS_Flat) {
gener = MbPythiaTuneATLAS_Flat();
} else if (proc == kPhojet) {
gener = MbPhojet();
}
//
//
// Size of the interaction diamond
// Longitudinal
Float_t sigmaz = 5.4 / TMath::Sqrt(2.); // [cm]
if (energy == 900)
//sigmaz = 10.5 / TMath::Sqrt(2.); // [cm]
//sigmaz = 3.7;
if (energy == 7000)
sigmaz = 6.3 / TMath::Sqrt(2.); // [cm]
//
// Transverse
// beta*
Float_t betast = 10.0; // beta* [m]
if (runNumber >= 117048) betast = 2.0;
if (runNumber > 122375) betast = 3.5; // starting with fill 1179
//
//
Float_t eps = 5.0e-6; // emittance [m]
Float_t gamma = energy / 2.0 / 0.938272; // relativistic gamma [1]
Float_t sigmaxy = TMath::Sqrt(eps * betast / gamma) / TMath::Sqrt(2.) * 100.; // [cm]
printf("\n \n Diamond size x-y: %10.3e z: %10.3e\n \n", sigmaxy, sigmaz);
gener->SetSigma(sigmaxy, sigmaxy, sigmaz); // Sigma in (X,Y,Z) (cm) on IP position
gener->SetVertexSmear(kPerEvent);
gener->Init();
printf("\n \n Comment: %s \n \n", comment.Data());
}
void Config()
{
cout << "Running g4Config.C ... " << endl;
// AliRoot setup
//
gROOT->LoadMacro("$ALICE_ROOT/test/vmctest/gun/commonConfig.C");
commonConfig();
// TPC primary ionization
AliTPC* TPC = (AliTPC*)gAlice->GetDetector("TPC");
if ( ! TPC )
cerr << "Cannot get TPC detector" << endl;
else {
cerr << "Setting TPC primary ionization" << endl;
TPC->SetPrimaryIonisation(); // not used with Geant3
}
// Load Geant4 + Geant4 VMC libraries
//
std::string g4libmacro("$G4VMCINSTALL/share/examples/macro/g4libs.C");
if (gClassTable->GetID("TGeant4") == -1) {
// Load Geant4 libraries
if (!gInterpreter->IsLoaded(g4libmacro.c_str())) {
gROOT->LoadMacro(g4libmacro.c_str());
gInterpreter->ProcessLine("g4libs()");
}
}
// Create Geant4 VMC
//
TGeant4 *geant4 = 0;
if ( ! gMC ) {
TG4RunConfiguration* runConfiguration
= new TG4RunConfiguration("geomRoot",
"FTFP_BERT_EMV+optical",
"specialCuts+stackPopper+stepLimiter",
true);
// = new TG4RunConfiguration("geomRootToGeant4",
// "FTFP_BERT_EMV+optical",
// "specialCuts+specialControls+stackPopper+stepLimiter",
// true);
geant4 = new TGeant4("TGeant4",
"The Geant4 Monte Carlo : FTFP_BERT_EMV+optical",
runConfiguration);
// Repeat physics selection in the title; to be removed
// with new geant4_vmc tag (1.13)
cout << "Geant4 has been created." << endl;
}
else {
cout << "Monte Carlo has been already created." << endl;
}
// Customization of Geant4 VMC
//
geant4->ProcessGeantCommand("/mcVerbose/all 1");
geant4->ProcessGeantCommand("/mcVerbose/geometryManager 1");
geant4->ProcessGeantCommand("/mcVerbose/opGeometryManager 1");
geant4->ProcessGeantCommand("/mcTracking/loopVerbose 0");
geant4->ProcessGeantCommand("/mcPhysics/rangeCuts 0.01 mm");
geant4->ProcessGeantCommand("/mcTracking/skipNeutrino true");
geant4->ProcessGeantCommand("/mcDet/setMaxStepInLowDensityMaterials 1 cm");
// for Geant4 <= 9.4.p03
//geant4->ProcessGeantCommand("/mcPhysics/selectOpProcess Scintillation");
//geant4->ProcessGeantCommand("/mcPhysics/setOpProcessActivation false");
// for Geant4 >= 9.5
geant4->ProcessGeantCommand("/optics_engine/selectOpProcess Scintillation");
geant4->ProcessGeantCommand("/optics_engine/setOpProcessUse false");
geant4->ProcessGeantCommand("/optics_engine/selectOpProcess OpWLS");
geant4->ProcessGeantCommand("/optics_engine/setOpProcessUse false");
geant4->ProcessGeantCommand("/optics_engine/selectOpProcess OpMieHG");
geant4->ProcessGeantCommand("/optics_engine/setOpProcessUse false");
// Activate reading random engine status from a file
gAlice->GetMCApp()->SetReadRndmStatus(kTRUE);
gAlice->GetMCApp()->SetRndmFileName("randomEvt4.root");
geant4->ProcessGeantCommand("/mcRun/readRandom true");
geant4->ProcessGeantCommand("/mcRun/setRandomFile run0evt4.rndm");
// Uncomment this line to get a detail info from each step
geant4->ProcessGeantCommand("/tracking/verbose 1");
// More info from the physics list
// the verbosity level is passed to all contained physics lists and their
// physics builders
//geant4->ProcessGeantCommand("/mcVerbose/composedPhysicsList 2");
// More info from optical processes
//geant4->ProcessGeantCommand("/mcVerbose/opticalPhysicsList 3");
// More info from geometry building
//geant4->ProcessGeantCommand("/mcVerbose/geometryManager 1");
// More info from setting geometry properties (in materials and surfaces)
// for optical physics
//geant4->ProcessGeantCommand("/mcVerbose/opGeometryManager 1");
// More info about regions construction
// and conversion of VMC cuts in cuts in range per regions
// geant4->ProcessGeantCommand("/mcVerbose/regionsManager 2");
// geant4->ProcessGeantCommand("/mcRegions/print true");
// Suppress verbose info from tracks which reached maximum number of steps
// (default value is 30000)
//geant4->ProcessGeantCommand("/mcTracking/loopVerbose 0");
//
// Set apply cuts
/*
geant4->ProcessGeantCommand("/run/particle/applyCuts");
// geant4->ProcessGeantCommand("/mcVerbose/geometryManager 2");
geant4->ProcessGeantCommand("/mcVerbose/composedPhysicsList 2");
geant4->ProcessGeantCommand("/mcDet/volNameSeparator !");
geant4->ProcessGeantCommand("/mcPhysics/setStackPopperSelection e+ e- pi+ pi- kaon+ kaon- gamma");
//geant4->ProcessGeantCommand("/tracking/verbose 1");
geant4->ProcessGeantCommand("/mcControl/g3Defaults");
!!!!n Generates warnings:
>>> Event 0
G4ProcessTable::Insert : arguments are 0 pointer
G4ProcessTable::Insert : arguments are 0 pointer
G4ProcessTable::Insert : arguments are 0 pointer
G4ProcessTable::Insert : arguments are 0 pointer
G4ProcessTable::Insert : arguments are 0 pointer
*/
// AliRoot event generator
// (it has to be created after MC, as it may use decayer via VMC)
//
gROOT->LoadMacro("$ALICE_ROOT/test/vmctest/gun/genExtFileConfig.C");
genExtFileConfig(4);
cout << "Running g4Config.C finished ... " << endl;
}
void Config()
{
// ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
// Theta range given through pseudorapidity limits 22/6/2001
// Set Random Number seed
//gRandom->SetSeed(123456); // Set 0 to use the current time
AliLog::Message(AliLog::kInfo, Form("Seed for random number generation = %d",gRandom->GetSeed()), "Config.C", "Config.C", "Config()","Config.C", __LINE__);
// Load Pythia libraries
LoadPythia();
// Libraries required by geant321
Bool_t isFluka = kTRUE;
if (isFluka) {
gSystem->Load("libGeom");
cout << "\t* Loading TFluka..." << endl;
gSystem->Load("libfluka");
cout << "\t* Instantiating TFluka..." << endl;
new TFluka("C++ Interface to Fluka", 0/*verbositylevel*/);
}
else {
cout << "\t* Loading Geant3..." << endl;
gSystem->Load("libgeant321");
cout << "\t* Instantiating Geant3TGeo..." << endl;
new TGeant3TGeo("C++ Interface to Geant3");
}
AliRunLoader* rl=0x0;
AliLog::Message(AliLog::kInfo, "Creating Run Loader", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);
rl = AliRunLoader::Open("galice.root",
AliConfig::GetDefaultEventFolderName(),
"recreate");
if (rl == 0x0)
{
gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
return;
}
rl->SetCompressionLevel(2);
rl->SetNumberOfEventsPerFile(3);
gAlice->SetRunLoader(rl);
// gAlice->SetGeometryFromFile("geometry.root");
// Uncomment if you want to load geometry from OCDB! >>>>
/*
if(!AliCDBManager::Instance()->IsDefaultStorageSet()){
cout << "#####################################################" << endl;
cout << "# #" << endl;
cout << "# WARNING: CDB DEFAULT STORAGE NOT SET !!! #" << endl;
cout << "# SETTING IT TO local://$ALICE_ROOT/OCDB !!! #" << endl;
cout << "# #" << endl;
cout << "#####################################################" << endl;
AliCDBManager::Instance()->SetDefaultStorage("local://$ALICE_ROOT/OCDB");
}
if(AliCDBManager::Instance()->GetRun() < 0){
cout << "#####################################################" << endl;
cout << "# #" << endl;
cout << "# WARNING: RUN NUMBER NOT SET !!! #" << endl;
cout << "# SETTING IT TO 0 !!! #" << endl;
cout << "# #" << endl;
cout << "#####################################################" << endl;
AliCDBManager::Instance()->SetRun(0);
}
gAlice->SetGeometryFromCDB();
*/
// Uncomment if you want to load geometry from OCDB! <<<<
// Set the trigger configuration
AliSimulation::Instance()->SetTriggerConfig("Pb-Pb");
cout<<"Trigger configuration is set to Pb-Pb"<<endl;
//
// Set External decayer
TVirtualMCDecayer *decayer = new AliDecayerPythia();
decayer->SetForceDecay(kAll);
decayer->Init();
gMC->SetExternalDecayer(decayer);
//=======================================================================
// ************* STEERING parameters FOR ALICE SIMULATION **************
// --- Specify event type to be tracked through the ALICE setup
// --- All positions are in cm, angles in degrees, and P and E in GeV
gMC->SetProcess("DCAY",1);
gMC->SetProcess("PAIR",1);
gMC->SetProcess("COMP",1);
gMC->SetProcess("PHOT",1);
gMC->SetProcess("PFIS",0);
gMC->SetProcess("DRAY",0);
gMC->SetProcess("ANNI",1);
gMC->SetProcess("BREM",1);
gMC->SetProcess("MUNU",1);
gMC->SetProcess("CKOV",1);
gMC->SetProcess("HADR",1);
gMC->SetProcess("LOSS",2);
gMC->SetProcess("MULS",1);
gMC->SetProcess("RAYL",1);
Float_t cut = 1.e-3; // 1MeV cut by default
Float_t tofmax = 1.e10;
gMC->SetCut("CUTGAM", cut);
gMC->SetCut("CUTELE", cut);
gMC->SetCut("CUTNEU", cut);
gMC->SetCut("CUTHAD", cut);
gMC->SetCut("CUTMUO", cut);
gMC->SetCut("BCUTE", cut);
gMC->SetCut("BCUTM", cut);
gMC->SetCut("DCUTE", cut);
gMC->SetCut("DCUTM", cut);
gMC->SetCut("PPCUTM", cut);
gMC->SetCut("TOFMAX", tofmax);
int nParticles = 100;
if (gSystem->Getenv("CONFIG_NPARTICLES"))
{
nParticles = atoi(gSystem->Getenv("CONFIG_NPARTICLES"));
}
AliGenCocktail *gener = new AliGenCocktail();
gener->SetPhiRange(0, 360);
// Set pseudorapidity range from -8 to 8.
Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
gener->SetThetaRange(thmin,thmax);
gener->SetOrigin(0, 0, 0); //vertex position
gener->SetSigma(0, 0, 0); //Sigma in (X,Y,Z) (cm) on IP position
AliGenHIJINGpara *hijingparam = new AliGenHIJINGpara(nParticles);
hijingparam->SetMomentumRange(0.2, 999);
gener->AddGenerator(hijingparam,"HIJING PARAM",1);
// AliGenBox *genbox = new AliGenBox(nParticles);
// genbox->SetPart(kGamma);
// genbox->SetPtRange(0.3, 10.00);
// gener->AddGenerator(genbox,"GENBOX GAMMA for PHOS",1);
gener->Init();
//
// Activate this line if you want the vertex smearing to happen
// track by track
//
//gener->SetVertexSmear(perTrack);
// Field (L3 0.4 T)
TGeoGlobalMagField::Instance()->SetField(new AliMagF("Maps","Maps", -1., -1., AliMagF::k5kG));
Int_t iABSO = 1;
Int_t iDIPO = 1;
Int_t iFMD = 1;
Int_t iFRAME = 1;
Int_t iHALL = 1;
Int_t iITS = 1;
Int_t iMAG = 1;
Int_t iMUON = 1;
Int_t iPHOS = 1;
Int_t iPIPE = 1;
Int_t iPMD = 1;
Int_t iHMPID = 1;
Int_t iSHIL = 1;
Int_t iT0 = 1;
Int_t iTOF = 1;
Int_t iTPC = 1;
Int_t iTRD = 1;
Int_t iZDC = 1;
Int_t iEMCAL = 1;
Int_t iACORDE = 1;
Int_t iVZERO = 1;
rl->CdGAFile();
//=================== Alice BODY parameters =============================
AliBODY *BODY = new AliBODY("BODY", "Alice envelop");
if (iMAG)
{
//=================== MAG parameters ============================
// --- Start with Magnet since detector layouts may be depending ---
// --- on the selected Magnet dimensions ---
AliMAG *MAG = new AliMAG("MAG", "Magnet");
}
if (iABSO)
{
//=================== ABSO parameters ============================
AliABSO *ABSO = new AliABSOv3("ABSO", "Muon Absorber");
}
if (iDIPO)
{
//=================== DIPO parameters ============================
AliDIPO *DIPO = new AliDIPOv3("DIPO", "Dipole version 3");
}
if (iHALL)
{
//=================== HALL parameters ============================
AliHALL *HALL = new AliHALLv3("HALL", "Alice Hall");
}
if (iFRAME)
{
//=================== FRAME parameters ============================
AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
FRAME->SetHoles(1);
}
if (iSHIL)
{
//=================== SHIL parameters ============================
AliSHIL *SHIL = new AliSHILv3("SHIL", "Shielding Version 3");
}
if (iPIPE)
{
//=================== PIPE parameters ============================
AliPIPE *PIPE = new AliPIPEv3("PIPE", "Beam Pipe");
}
if (iITS)
{
//=================== ITS parameters ============================
AliITS *ITS = new AliITSv11("ITS","ITS v11");
}
if (iTPC)
{
//============================ TPC parameters ===================
AliTPC *TPC = new AliTPCv2("TPC", "Default");
TPC->SetPrimaryIonisation();
}
if (iTOF) {
//=================== TOF parameters ============================
AliTOF *TOF = new AliTOFv6T0("TOF", "normal TOF");
}
if (iHMPID)
{
//=================== HMPID parameters ===========================
AliHMPID *HMPID = new AliHMPIDv3("HMPID", "normal HMPID");
}
if (iZDC)
{
//=================== ZDC parameters ============================
AliZDC *ZDC = new AliZDCv3("ZDC", "normal ZDC");
}
if (iTRD)
{
//=================== TRD parameters ============================
AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
}
if (iFMD)
{
//=================== FMD parameters ============================
AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
}
if (iMUON)
{
//=================== MUON parameters ===========================
// New MUONv1 version (geometry defined via builders)
AliMUON *MUON = new AliMUONv1("MUON", "default");
}
//=================== PHOS parameters ===========================
if (iPHOS)
{
AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
}
if (iPMD)
{
//=================== PMD parameters ============================
AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
}
if (iT0)
{
//=================== T0 parameters ============================
AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
}
if (iEMCAL)
{
//=================== EMCAL parameters ============================
AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "EMCAL_COMPLETE");
}
if (iACORDE)
{
//=================== ACORDE parameters ============================
AliACORDE *ACORDE = new AliACORDEv1("ACORDE", "normal ACORDE");
}
if (iVZERO)
{
//=================== VZERO parameters ============================
AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
}
AliLog::Message(AliLog::kInfo, "End of Config", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);
}