/*
* Called on a mouse left button double click
*/
void FOOTPRINT_EDIT_FRAME::OnLeftDClick( wxDC* DC, const wxPoint& MousePos )
{
BOARD_ITEM* item = GetCurItem();
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
item = ModeditLocateAndDisplay();
}
if( ( item == NULL ) || ( item->GetFlags() != 0 ) )
break;
// Item found
SetCurItem( item );
OnEditItemRequest( DC, item );
break; // end case 0
case ID_PCB_ADD_LINE_BUTT:
{
if( item && item->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
m_canvas->Refresh();
}
break;
}
default:
break;
}
}
void FOOTPRINT_EDIT_FRAME::OnLeftClick( wxDC* DC, const wxPoint& MousePos )
{
BOARD_ITEM* item = GetCurItem();
m_canvas->CrossHairOff( DC );
if( GetToolId() == ID_NO_TOOL_SELECTED )
{
if( item && item->GetFlags() ) // Move item command in progress
{
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
PlaceTexteModule( static_cast<TEXTE_MODULE*>( item ), DC );
break;
case PCB_MODULE_EDGE_T:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
Place_EdgeMod( static_cast<EDGE_MODULE*>( item ) );
break;
case PCB_PAD_T:
PlacePad( static_cast<D_PAD*>( item ), DC );
break;
default:
{
wxString msg;
msg.Printf( wxT( "WinEDA_ModEditFrame::OnLeftClick err:Struct %d, m_Flag %X" ),
item->Type(), item->GetFlags() );
DisplayError( this, msg );
item->ClearFlags();
break;
}
}
}
else
{
if( !wxGetKeyState( WXK_SHIFT ) && !wxGetKeyState( WXK_ALT )
&& !wxGetKeyState( WXK_CONTROL ) )
item = ModeditLocateAndDisplay();
SetCurItem( item );
}
}
item = GetCurItem();
bool no_item_edited = item == NULL || item->GetFlags() == 0;
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
break;
case ID_MODEDIT_CIRCLE_TOOL:
case ID_MODEDIT_ARC_TOOL:
case ID_MODEDIT_LINE_TOOL:
if( no_item_edited )
{
STROKE_T shape = S_SEGMENT;
if( GetToolId() == ID_MODEDIT_CIRCLE_TOOL )
shape = S_CIRCLE;
if( GetToolId() == ID_MODEDIT_ARC_TOOL )
shape = S_ARC;
SetCurItem( Begin_Edge_Module( (EDGE_MODULE*) NULL, DC, shape ) );
}
else if( item->IsNew() )
{
if( ( (EDGE_MODULE*) item )->GetShape() == S_CIRCLE )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
m_canvas->Refresh();
}
else if( ( (EDGE_MODULE*) item )->GetShape() == S_ARC )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
m_canvas->Refresh();
}
else if( ( (EDGE_MODULE*) item )->GetShape() == S_SEGMENT )
{
SetCurItem( Begin_Edge_Module( (EDGE_MODULE*) item, DC, S_SEGMENT ) );
}
else
{
wxMessageBox( wxT( "ProcessCommand error: unknown shape" ) );
}
}
break;
case ID_MODEDIT_DELETE_TOOL:
if( ! no_item_edited ) // Item in edit, cannot delete it
break;
item = ModeditLocateAndDisplay();
if( item && item->Type() != PCB_MODULE_T ) // Cannot delete the module itself
{
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
RemoveStruct( item );
SetCurItem( NULL );
}
break;
case ID_MODEDIT_ANCHOR_TOOL:
{
MODULE* module = GetBoard()->m_Modules;
if( module == NULL // No module loaded
|| (module->GetFlags() != 0) )
break;
SaveCopyInUndoList( module, UR_MODEDIT );
// set the new relative internal local coordinates of footprint items
wxPoint moveVector = module->GetPosition() - GetCrossHairPosition();
module->MoveAnchorPosition( moveVector );
// Usually, we do not need to change twice the anchor position,
// so deselect the active tool
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
SetCurItem( NULL );
m_canvas->Refresh();
}
break;
case ID_MODEDIT_PLACE_GRID_COORD:
m_canvas->DrawGridAxis( DC, GR_XOR, GetBoard()->GetGridOrigin() );
SetGridOrigin( GetCrossHairPosition() );
m_canvas->DrawGridAxis( DC, GR_COPY, GetBoard()->GetGridOrigin() );
GetScreen()->SetModify();
break;
case ID_MODEDIT_TEXT_TOOL:
if( GetBoard()->m_Modules == NULL )
break;
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
CreateTextModule( GetBoard()->m_Modules, DC );
break;
case ID_MODEDIT_PAD_TOOL:
if( GetBoard()->m_Modules )
{
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
AddPad( GetBoard()->m_Modules, true );
}
break;
default:
DisplayError( this, wxT( "FOOTPRINT_EDIT_FRAME::ProcessCommand error" ) );
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
m_canvas->CrossHairOn( DC );
}
/* Handle the left button mouse click, when a tool is active
*/
void PCB_EDIT_FRAME::OnLeftClick( wxDC* aDC, const wxPoint& aPosition )
{
BOARD_ITEM* DrawStruct = GetCurItem();
bool exit = false;
bool no_tool = GetToolId() == ID_NO_TOOL_SELECTED;
if( no_tool || ( DrawStruct && DrawStruct->GetFlags() ) )
{
m_canvas->SetAutoPanRequest( false );
if( DrawStruct && DrawStruct->GetFlags() ) // Command in progress
{
m_canvas->SetIgnoreMouseEvents( true );
m_canvas->CrossHairOff( aDC );
switch( DrawStruct->Type() )
{
case PCB_ZONE_AREA_T:
if( DrawStruct->IsNew() )
{
m_canvas->SetAutoPanRequest( true );
Begin_Zone( aDC );
}
else
{
End_Move_Zone_Corner_Or_Outlines( aDC, (ZONE_CONTAINER*) DrawStruct );
}
exit = true;
break;
case PCB_TRACE_T:
case PCB_VIA_T:
if( DrawStruct->IsDragging() )
{
PlaceDraggedOrMovedTrackSegment( (TRACK*) DrawStruct, aDC );
exit = true;
}
break;
case PCB_TEXT_T:
Place_Texte_Pcb( (TEXTE_PCB*) DrawStruct, aDC );
exit = true;
break;
case PCB_MODULE_TEXT_T:
PlaceTexteModule( (TEXTE_MODULE*) DrawStruct, aDC );
exit = true;
break;
case PCB_PAD_T:
PlacePad( (D_PAD*) DrawStruct, aDC );
exit = true;
break;
case PCB_MODULE_T:
PlaceModule( (MODULE*) DrawStruct, aDC );
exit = true;
break;
case PCB_TARGET_T:
PlaceTarget( (PCB_TARGET*) DrawStruct, aDC );
exit = true;
break;
case PCB_LINE_T:
if( no_tool ) // when no tools: existing item moving.
{
Place_DrawItem( (DRAWSEGMENT*) DrawStruct, aDC );
exit = true;
}
break;
case PCB_DIMENSION_T:
if( ! DrawStruct->IsNew() )
{ // We are moving the text of an existing dimension. Place it
PlaceDimensionText( (DIMENSION*) DrawStruct, aDC );
exit = true;
}
break;
default:
DisplayError( this,
wxT( "PCB_EDIT_FRAME::OnLeftClick() err: DrawType %d m_Flags != 0" ),
DrawStruct->Type() );
exit = true;
break;
}
m_canvas->SetIgnoreMouseEvents( false );
m_canvas->CrossHairOn( aDC );
if( exit )
return;
}
else if( !wxGetKeyState( WXK_SHIFT ) && !wxGetKeyState( WXK_ALT )
&& !wxGetKeyState( WXK_CONTROL ) )
{
DrawStruct = PcbGeneralLocateAndDisplay();
if( DrawStruct )
SendMessageToEESCHEMA( DrawStruct );
}
}
if( DrawStruct ) // display netclass info for zones, tracks and pads
{
switch( DrawStruct->Type() )
{
case PCB_ZONE_AREA_T:
case PCB_TRACE_T:
case PCB_VIA_T:
case PCB_PAD_T:
GetDesignSettings().SetCurrentNetClass(
((BOARD_CONNECTED_ITEM*)DrawStruct)->GetNetClassName() );
updateTraceWidthSelectBox();
updateViaSizeSelectBox();
break;
default:
break;
}
}
switch( GetToolId() )
{
case ID_MAIN_MENUBAR:
case ID_NO_TOOL_SELECTED:
break;
case ID_PCB_MUWAVE_TOOL_SELF_CMD:
case ID_PCB_MUWAVE_TOOL_GAP_CMD:
case ID_PCB_MUWAVE_TOOL_STUB_CMD:
case ID_PCB_MUWAVE_TOOL_STUB_ARC_CMD:
case ID_PCB_MUWAVE_TOOL_FUNCTION_SHAPE_CMD:
MuWaveCommand( aDC, aPosition );
break;
case ID_PCB_HIGHLIGHT_BUTT:
{
int netcode = SelectHighLight( aDC );
if( netcode < 0 )
SetMsgPanel( GetBoard() );
else
{
NETINFO_ITEM* net = GetBoard()->FindNet( netcode );
if( net )
{
MSG_PANEL_ITEMS items;
net->GetMsgPanelInfo( items );
SetMsgPanel( items );
}
}
}
break;
case ID_PCB_SHOW_1_RATSNEST_BUTT:
DrawStruct = PcbGeneralLocateAndDisplay();
Show_1_Ratsnest( DrawStruct, aDC );
if( DrawStruct )
SendMessageToEESCHEMA( DrawStruct );
break;
case ID_PCB_MIRE_BUTT:
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
SetCurItem( (BOARD_ITEM*) CreateTarget( aDC ) );
m_canvas->MoveCursorToCrossHair();
}
else if( DrawStruct->Type() == PCB_TARGET_T )
{
PlaceTarget( (PCB_TARGET*) DrawStruct, aDC );
}
else
{
DisplayError( this, wxT( "OnLeftClick err: not a PCB_TARGET_T" ) );
}
break;
case ID_PCB_CIRCLE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_ADD_LINE_BUTT:
{
STROKE_T shape = S_SEGMENT;
if( GetToolId() == ID_PCB_CIRCLE_BUTT )
shape = S_CIRCLE;
if( GetToolId() == ID_PCB_ARC_BUTT )
shape = S_ARC;
if( IsCopperLayer( GetActiveLayer() ) )
{
DisplayError( this, _( "Graphic not allowed on Copper layers" ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = (BOARD_ITEM*) Begin_DrawSegment( NULL, shape, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct
&& (DrawStruct->Type() == PCB_LINE_T)
&& DrawStruct->IsNew() )
{
DrawStruct = (BOARD_ITEM*) Begin_DrawSegment( (DRAWSEGMENT*) DrawStruct, shape, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
}
break;
case ID_TRACK_BUTT:
if( !IsCopperLayer( GetActiveLayer() ) )
{
DisplayError( this, _( "Tracks on Copper layers only " ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = (BOARD_ITEM*) Begin_Route( NULL, aDC );
SetCurItem( DrawStruct );
if( DrawStruct )
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct && DrawStruct->IsNew() )
{
TRACK* track = Begin_Route( (TRACK*) DrawStruct, aDC );
// SetCurItem() must not write to the msg panel
// because a track info is displayed while moving the mouse cursor
if( track ) // A new segment was created
SetCurItem( DrawStruct = (BOARD_ITEM*) track, false );
m_canvas->SetAutoPanRequest( true );
}
break;
case ID_PCB_ZONES_BUTT:
case ID_PCB_KEEPOUT_AREA_BUTT:
/* ZONE or KEEPOUT Tool is selected. Determine action for a left click:
* this can be start a new zone or select and move an existing zone outline corner
* if found near the mouse cursor
*/
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
if( Begin_Zone( aDC ) )
{
m_canvas->SetAutoPanRequest( true );
DrawStruct = GetBoard()->m_CurrentZoneContour;
GetScreen()->SetCurItem( DrawStruct );
}
}
else if( DrawStruct && (DrawStruct->Type() == PCB_ZONE_AREA_T) && DrawStruct->IsNew() )
{ // Add a new corner to the current outline being created:
m_canvas->SetAutoPanRequest( true );
Begin_Zone( aDC );
DrawStruct = GetBoard()->m_CurrentZoneContour;
GetScreen()->SetCurItem( DrawStruct );
}
else
{
DisplayError( this, wxT( "PCB_EDIT_FRAME::OnLeftClick() zone internal error" ) );
}
break;
case ID_PCB_ADD_TEXT_BUTT:
if( IsLayerInList( EDGE_LAYER, GetActiveLayer() ) )
{
DisplayError( this,
_( "Texts not allowed on Edge Cut layer" ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
SetCurItem( CreateTextePcb( aDC ) );
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct->Type() == PCB_TEXT_T )
{
Place_Texte_Pcb( (TEXTE_PCB*) DrawStruct, aDC );
m_canvas->SetAutoPanRequest( false );
}
else
{
DisplayError( this, wxT( "OnLeftClick err: not a PCB_TEXT_T" ) );
}
break;
case ID_PCB_MODULE_BUTT:
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
m_canvas->MoveCursorToCrossHair();
DrawStruct = (BOARD_ITEM*) LoadModuleFromLibrary(
wxEmptyString, Prj().PcbFootprintLibs(), true, aDC );
SetCurItem( DrawStruct );
if( DrawStruct )
StartMoveModule( (MODULE*) DrawStruct, aDC, false );
}
else if( DrawStruct->Type() == PCB_MODULE_T )
{
PlaceModule( (MODULE*) DrawStruct, aDC );
m_canvas->SetAutoPanRequest( false );
}
else
{
DisplayError( this, wxT( "Internal err: Struct not PCB_MODULE_T" ) );
}
break;
case ID_PCB_DIMENSION_BUTT:
if( IsLayerInList( EDGE_LAYER|ALL_CU_LAYERS, GetActiveLayer() ) )
{
DisplayError( this,
_( "Dimension not allowed on Copper or Edge Cut layers" ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = (BOARD_ITEM*) EditDimension( NULL, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct && (DrawStruct->Type() == PCB_DIMENSION_T) && DrawStruct->IsNew() )
{
DrawStruct = (BOARD_ITEM*) EditDimension( (DIMENSION*) DrawStruct, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
else
{
DisplayError( this,
wxT( "PCB_EDIT_FRAME::OnLeftClick() error item is not a DIMENSION" ) );
}
break;
case ID_PCB_DELETE_ITEM_BUTT:
if( !DrawStruct || !DrawStruct->GetFlags() )
{
DrawStruct = PcbGeneralLocateAndDisplay();
if( DrawStruct && (DrawStruct->GetFlags() == 0) )
{
RemoveStruct( DrawStruct, aDC );
SetCurItem( DrawStruct = NULL );
}
}
break;
case ID_PCB_PLACE_OFFSET_COORD_BUTT:
m_canvas->DrawAuxiliaryAxis( aDC, GR_XOR );
SetAuxOrigin( GetCrossHairPosition() );
m_canvas->DrawAuxiliaryAxis( aDC, GR_COPY );
OnModify();
break;
case ID_PCB_PLACE_GRID_COORD_BUTT:
m_canvas->DrawGridAxis( aDC, GR_XOR, GetBoard()->GetGridOrigin() );
SetGridOrigin( GetCrossHairPosition() );
m_canvas->DrawGridAxis( aDC, GR_COPY, GetBoard()->GetGridOrigin() );
break;
default:
DisplayError( this, wxT( "PCB_EDIT_FRAME::OnLeftClick() id error" ) );
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
}
/*
* Called on a mouse left button double click
*/
void FOOTPRINT_EDIT_FRAME::OnLeftDClick( wxDC* DC, const wxPoint& MousePos )
{
BOARD_ITEM* item = GetCurItem();
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
item = ModeditLocateAndDisplay();
}
if( ( item == NULL ) || ( item->GetFlags() != 0 ) )
break;
// Item found
SetCurItem( item );
switch( item->Type() )
{
case PCB_PAD_T:
InstallPadOptionsFrame( (D_PAD*) item );
m_canvas->MoveCursorToCrossHair();
break;
case PCB_MODULE_T:
{
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) item );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->MoveCursorToCrossHair();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case PCB_MODULE_TEXT_T:
InstallTextModOptionsFrame( (TEXTE_MODULE*) item, DC );
m_canvas->MoveCursorToCrossHair();
break;
case PCB_MODULE_EDGE_T :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) item );
m_canvas->Refresh();
break;
default:
break;
}
break; // end case 0
case ID_PCB_ADD_LINE_BUTT:
{
if( item && item->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
m_canvas->Refresh();
}
break;
}
default:
break;
}
}
/* handle the double click on the mouse left button
*/
void PCB_EDIT_FRAME::OnLeftDClick( wxDC* aDC, const wxPoint& aPosition )
{
BOARD_ITEM* DrawStruct = GetCurItem();
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = PcbGeneralLocateAndDisplay();
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() != 0) )
break;
SendMessageToEESCHEMA( DrawStruct );
// An item is found
SetCurItem( DrawStruct );
switch( DrawStruct->Type() )
{
case PCB_TRACE_T:
case PCB_VIA_T:
if( DrawStruct->IsNew() )
{
if( End_Route( (TRACK*) DrawStruct, aDC ) )
m_canvas->SetAutoPanRequest( false );
}
else if( DrawStruct->GetFlags() == 0 )
{
Edit_TrackSegm_Width( aDC, (TRACK*) DrawStruct );
}
break;
case PCB_TEXT_T:
case PCB_PAD_T:
case PCB_MODULE_T:
case PCB_TARGET_T:
case PCB_DIMENSION_T:
case PCB_MODULE_TEXT_T:
OnEditItemRequest( aDC, DrawStruct );
m_canvas->MoveCursorToCrossHair();
break;
case PCB_LINE_T:
OnEditItemRequest( aDC, DrawStruct );
break;
case PCB_ZONE_AREA_T:
if( DrawStruct->GetFlags() )
break;
OnEditItemRequest( aDC, DrawStruct );
break;
default:
break;
}
break; // end case 0
case ID_TRACK_BUTT:
if( DrawStruct && DrawStruct->IsNew() )
{
if( End_Route( (TRACK*) DrawStruct, aDC ) )
m_canvas->SetAutoPanRequest( false );
}
break;
case ID_PCB_ZONES_BUTT:
case ID_PCB_KEEPOUT_AREA_BUTT:
if( End_Zone( aDC ) )
{
m_canvas->SetAutoPanRequest( false );
SetCurItem( NULL );
}
break;
case ID_PCB_ADD_LINE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_CIRCLE_BUTT:
if( DrawStruct == NULL )
break;
if( DrawStruct->Type() != PCB_LINE_T )
{
DisplayError( this, wxT( "DrawStruct Type error" ) );
m_canvas->SetAutoPanRequest( false );
break;
}
if( DrawStruct->IsNew() )
{
End_Edge( (DRAWSEGMENT*) DrawStruct, aDC );
m_canvas->SetAutoPanRequest( false );
SetCurItem( NULL );
}
break;
}
}
