void
MainWindow::_Mount(BDiskDevice* disk, partition_id selectedPartition)
{
if (!disk || selectedPartition < 0) {
_DisplayPartitionError(B_TRANSLATE("You need to select a partition "
"entry from the list."));
return;
}
BPartition* partition = disk->FindDescendant(selectedPartition);
if (!partition) {
_DisplayPartitionError(B_TRANSLATE("Unable to find the selected "
"partition by ID."));
return;
}
if (!partition->IsMounted()) {
status_t ret = partition->Mount();
if (ret < B_OK) {
_DisplayPartitionError(
B_TRANSLATE("Could not mount partition %s."), partition, ret);
} else {
// successful mount, adapt to the changes
_ScanDrives();
}
} else {
_DisplayPartitionError(
B_TRANSLATE("The partition %s is already mounted."), partition);
}
}
void
MainWindow::_Unmount(BDiskDevice* disk, partition_id selectedPartition)
{
if (!disk || selectedPartition < 0) {
_DisplayPartitionError(B_TRANSLATE("You need to select a partition "
"entry from the list."));
return;
}
BPartition* partition = disk->FindDescendant(selectedPartition);
if (!partition) {
_DisplayPartitionError(B_TRANSLATE("Unable to find the selected "
"partition by ID."));
return;
}
if (partition->IsMounted()) {
BPath path;
partition->GetMountPoint(&path);
status_t ret = partition->Unmount();
if (ret < B_OK) {
_DisplayPartitionError(
B_TRANSLATE("Could not unmount partition %s."),
partition, ret);
} else {
if (dev_for_path(path.Path()) == dev_for_path("/"))
rmdir(path.Path());
// successful unmount, adapt to the changes
_ScanDrives();
}
} else {
_DisplayPartitionError(
B_TRANSLATE("The partition %s is already unmounted."),
partition);
}
}
void
WorkerThread::MessageReceived(BMessage* message)
{
CALLED();
switch (message->what) {
case MSG_START_INSTALLING:
_PerformInstall(fWindow->GetSourceMenu(), fWindow->GetTargetMenu());
break;
case MSG_WRITE_BOOT_SECTOR:
{
int32 id;
if (message->FindInt32("id", &id) != B_OK) {
_SetStatusMessage(B_TRANSLATE("Boot sector not written "
"because of an internal error."));
break;
}
// TODO: Refactor with _PerformInstall()
BPath targetDirectory;
BDiskDevice device;
BPartition* partition;
if (fDDRoster.GetPartitionWithID(id, &device, &partition) == B_OK) {
if (!partition->IsMounted()) {
if (partition->Mount() < B_OK) {
_SetStatusMessage(B_TRANSLATE("The partition can't be "
"mounted. Please choose a different partition."));
break;
}
}
if (partition->GetMountPoint(&targetDirectory) != B_OK) {
_SetStatusMessage(B_TRANSLATE("The mount point could not "
"be retrieved."));
break;
}
} else if (fDDRoster.GetDeviceWithID(id, &device) == B_OK) {
if (!device.IsMounted()) {
if (device.Mount() < B_OK) {
_SetStatusMessage(B_TRANSLATE("The disk can't be "
"mounted. Please choose a different disk."));
break;
}
}
if (device.GetMountPoint(&targetDirectory) != B_OK) {
_SetStatusMessage(B_TRANSLATE("The mount point could not "
"be retrieved."));
break;
}
}
_LaunchFinishScript(targetDirectory);
// TODO: Get error from executing script!
_SetStatusMessage(
B_TRANSLATE("Boot sector successfully written."));
}
default:
BLooper::MessageReceived(message);
}
}
void
WorkerThread::_PerformInstall(BMenu* srcMenu, BMenu* targetMenu)
{
CALLED();
BPath targetDirectory;
BPath srcDirectory;
BPath trashPath;
BPath testPath;
BDirectory targetDir;
BDiskDevice device;
BPartition* partition;
BVolume targetVolume;
status_t err = B_OK;
int32 entries = 0;
entry_ref testRef;
const char* mountError = B_TRANSLATE("The disk can't be mounted. Please "
"choose a different disk.");
BMessenger messenger(fWindow);
ProgressReporter reporter(messenger, new BMessage(MSG_STATUS_MESSAGE));
CopyEngine engine(&reporter);
BList unzipEngines;
PartitionMenuItem* targetItem = (PartitionMenuItem*)targetMenu->FindMarked();
PartitionMenuItem* srcItem = (PartitionMenuItem*)srcMenu->FindMarked();
if (!srcItem || !targetItem) {
ERR("bad menu items\n");
goto error;
}
// check if target is initialized
// ask if init or mount as is
if (fDDRoster.GetPartitionWithID(targetItem->ID(), &device,
&partition) == B_OK) {
if (!partition->IsMounted()) {
if ((err = partition->Mount()) < B_OK) {
_SetStatusMessage(mountError);
ERR("BPartition::Mount");
goto error;
}
}
if ((err = partition->GetVolume(&targetVolume)) != B_OK) {
ERR("BPartition::GetVolume");
goto error;
}
if ((err = partition->GetMountPoint(&targetDirectory)) != B_OK) {
ERR("BPartition::GetMountPoint");
goto error;
}
} else if (fDDRoster.GetDeviceWithID(targetItem->ID(), &device) == B_OK) {
if (!device.IsMounted()) {
if ((err = device.Mount()) < B_OK) {
_SetStatusMessage(mountError);
ERR("BDiskDevice::Mount");
goto error;
}
}
if ((err = device.GetVolume(&targetVolume)) != B_OK) {
ERR("BDiskDevice::GetVolume");
goto error;
}
if ((err = device.GetMountPoint(&targetDirectory)) != B_OK) {
ERR("BDiskDevice::GetMountPoint");
goto error;
}
} else
goto error; // shouldn't happen
// check if target has enough space
if ((fSpaceRequired > 0 && targetVolume.FreeBytes() < fSpaceRequired)
&& ((new BAlert("", B_TRANSLATE("The destination disk may not have "
"enough space. Try choosing a different disk or choose to not "
"install optional items."), B_TRANSLATE("Try installing anyway"),
B_TRANSLATE("Cancel"), 0,
B_WIDTH_AS_USUAL, B_STOP_ALERT))->Go() != 0)) {
goto error;
}
if (fDDRoster.GetPartitionWithID(srcItem->ID(), &device, &partition) == B_OK) {
if ((err = partition->GetMountPoint(&srcDirectory)) != B_OK) {
ERR("BPartition::GetMountPoint");
goto error;
}
} else if (fDDRoster.GetDeviceWithID(srcItem->ID(), &device) == B_OK) {
if ((err = device.GetMountPoint(&srcDirectory)) != B_OK) {
ERR("BDiskDevice::GetMountPoint");
goto error;
}
} else
goto error; // shouldn't happen
// check not installing on itself
if (strcmp(srcDirectory.Path(), targetDirectory.Path()) == 0) {
_SetStatusMessage(B_TRANSLATE("You can't install the contents of a "
"disk onto itself. Please choose a different disk."));
goto error;
}
// check not installing on boot volume
if ((strncmp(BOOT_PATH, targetDirectory.Path(), strlen(BOOT_PATH)) == 0)
&& ((new BAlert("", B_TRANSLATE("Are you sure you want to install "
"onto the current boot disk? The Installer will have to reboot "
"your machine if you proceed."), B_TRANSLATE("OK"),
B_TRANSLATE("Cancel"), 0,
B_WIDTH_AS_USUAL, B_STOP_ALERT))->Go() != 0)) {
_SetStatusMessage("Installation stopped.");
goto error;
}
// check if target volume's trash dir has anything in it
// (target volume w/ only an empty trash dir is considered
// an empty volume)
if (find_directory(B_TRASH_DIRECTORY, &trashPath, false,
&targetVolume) == B_OK && targetDir.SetTo(trashPath.Path()) == B_OK) {
while (targetDir.GetNextRef(&testRef) == B_OK) {
// Something in the Trash
entries++;
break;
}
}
targetDir.SetTo(targetDirectory.Path());
// check if target volume otherwise has any entries
while (entries == 0 && targetDir.GetNextRef(&testRef) == B_OK) {
if (testPath.SetTo(&testRef) == B_OK && testPath != trashPath)
entries++;
}
if (entries != 0
&& ((new BAlert("", B_TRANSLATE("The target volume is not empty. Are "
"you sure you want to install anyway?\n\nNote: The 'system' folder "
"will be a clean copy from the source volume, all other folders "
"will be merged, whereas files and links that exist on both the "
"source and target volume will be overwritten with the source "
"volume version."),
B_TRANSLATE("Install anyway"), B_TRANSLATE("Cancel"), 0,
B_WIDTH_AS_USUAL, B_STOP_ALERT))->Go() != 0)) {
// TODO: Would be cool to offer the option here to clean additional
// folders at the user's choice (like /boot/common and /boot/develop).
err = B_CANCELED;
goto error;
}
// Begin actual installation
_LaunchInitScript(targetDirectory);
// Create the default indices which should always be present on a proper
// boot volume. We don't care if the source volume does not have them.
// After all, the user might be re-installing to another drive and may
// want problems fixed along the way...
err = _CreateDefaultIndices(targetDirectory);
if (err != B_OK)
goto error;
// Mirror all the indices which are present on the source volume onto
// the target volume.
err = _MirrorIndices(srcDirectory, targetDirectory);
if (err != B_OK)
goto error;
// Let the engine collect information for the progress bar later on
engine.ResetTargets(srcDirectory.Path());
err = engine.CollectTargets(srcDirectory.Path(), fCancelSemaphore);
if (err != B_OK)
goto error;
// Collect selected packages also
if (fPackages) {
BPath pkgRootDir(srcDirectory.Path(), PACKAGES_DIRECTORY);
int32 count = fPackages->CountItems();
for (int32 i = 0; i < count; i++) {
Package *p = static_cast<Package*>(fPackages->ItemAt(i));
BPath packageDir(pkgRootDir.Path(), p->Folder());
err = engine.CollectTargets(packageDir.Path(), fCancelSemaphore);
if (err != B_OK)
goto error;
}
}
// collect information about all zip packages
err = _ProcessZipPackages(srcDirectory.Path(), targetDirectory.Path(),
&reporter, unzipEngines);
if (err != B_OK)
goto error;
reporter.StartTimer();
// copy source volume
err = engine.CopyFolder(srcDirectory.Path(), targetDirectory.Path(),
fCancelSemaphore);
if (err != B_OK)
goto error;
// copy selected packages
if (fPackages) {
BPath pkgRootDir(srcDirectory.Path(), PACKAGES_DIRECTORY);
int32 count = fPackages->CountItems();
for (int32 i = 0; i < count; i++) {
Package *p = static_cast<Package*>(fPackages->ItemAt(i));
BPath packageDir(pkgRootDir.Path(), p->Folder());
err = engine.CopyFolder(packageDir.Path(), targetDirectory.Path(),
fCancelSemaphore);
if (err != B_OK)
goto error;
}
}
// Extract all zip packages. If an error occured, delete the rest of
// the engines, but stop extracting.
for (int32 i = 0; i < unzipEngines.CountItems(); i++) {
UnzipEngine* engine = reinterpret_cast<UnzipEngine*>(
unzipEngines.ItemAtFast(i));
if (err == B_OK)
err = engine->UnzipPackage();
delete engine;
}
if (err != B_OK)
goto error;
_LaunchFinishScript(targetDirectory);
BMessenger(fWindow).SendMessage(MSG_INSTALL_FINISHED);
return;
error:
BMessage statusMessage(MSG_RESET);
if (err == B_CANCELED)
_SetStatusMessage(B_TRANSLATE("Installation canceled."));
else
statusMessage.AddInt32("error", err);
ERR("_PerformInstall failed");
BMessenger(fWindow).SendMessage(&statusMessage);
}
int
main(int argc, char** argv)
{
const struct option kLongOptions[] = {
{ "help", 0, NULL, 'h' },
{ "check-only", 0, NULL, 'c' },
{ NULL, 0, NULL, 0 }
};
const char* kShortOptions = "hc";
// parse argument list
bool checkOnly = false;
while (true) {
int nextOption = getopt_long(argc, argv, kShortOptions, kLongOptions,
NULL);
if (nextOption == -1)
break;
switch (nextOption) {
case 'h': // --help
usage(stdout);
return 0;
case 'c': // --check-only
checkOnly = true;
break;
default: // everything else
usage(stderr);
return 1;
}
}
// the device name should be the only non-option element
if (optind != argc - 1) {
usage(stderr);
return 1;
}
const char* path = argv[optind];
//UnregisterFileDevice unregisterFileDevice;
BDiskDeviceRoster roster;
BPartition* partition;
BDiskDevice device;
status_t status = roster.GetPartitionForPath(path, &device,
&partition);
if (status != B_OK) {
if (strncmp(path, "/dev", 4)) {
// try mounted volume
status = roster.FindPartitionByMountPoint(path, &device, &partition)
? B_OK : B_BAD_VALUE;
}
// TODO: try to register file device
if (status != B_OK) {
fprintf(stderr, "%s: Failed to get disk device for path \"%s\": "
"%s\n", kProgramName, path, strerror(status));
return 1;
}
}
// Prepare the device for modifications
status = device.PrepareModifications();
if (status != B_OK) {
fprintf(stderr, "%s: Could not prepare the device for modifications: "
"%s\n", kProgramName, strerror(status));
return 1;
}
// Check if the partition supports repairing
bool canRepairWhileMounted;
bool canRepair = partition->CanRepair(checkOnly, &canRepairWhileMounted);
if (!canRepair && !canRepairWhileMounted) {
fprintf(stderr, "%s: The disk system does not support repairing.\n",
kProgramName);
return 1;
}
if (partition->IsMounted() && !canRepairWhileMounted) {
fprintf(stderr, "%s: The disk system does not support repairing a "
"mounted volume.\n", kProgramName);
return 1;
}
if (!partition->IsMounted() && !canRepair) {
fprintf(stderr, "%s: The disk system does not support repairing a "
"volume that is not mounted.\n", kProgramName);
return 1;
}
BDiskSystem diskSystem;
status = partition->GetDiskSystem(&diskSystem);
if (status != B_OK) {
fprintf(stderr, "%s: Failed to get disk system for partition: %s\n",
kProgramName, strerror(status));
return 1;
}
// Repair the volume
status = partition->Repair(checkOnly);
if (status != B_OK) {
fprintf(stderr, "%s: Repairing failed: %s\n", kProgramName,
strerror(status));
return 1;
}
status = device.CommitModifications();
return 0;
}
void
MainWindow::_Initialize(BDiskDevice* disk, partition_id selectedPartition,
const BString& diskSystemName)
{
if (!disk || selectedPartition < 0) {
_DisplayPartitionError(B_TRANSLATE("You need to select a partition "
"entry from the list."));
return;
}
if (disk->IsReadOnly()) {
_DisplayPartitionError(B_TRANSLATE("The selected disk is read-only."));
return;
}
BPartition* partition = disk->FindDescendant(selectedPartition);
if (!partition) {
_DisplayPartitionError(B_TRANSLATE("Unable to find the selected "
"partition by ID."));
return;
}
if (partition->IsMounted()) {
_DisplayPartitionError(
B_TRANSLATE("The partition %s is currently mounted."));
// TODO: option to unmount and continue on success to unmount
return;
}
BDiskSystem diskSystem;
fDDRoster.RewindDiskSystems();
bool found = false;
while (fDDRoster.GetNextDiskSystem(&diskSystem) == B_OK) {
if (diskSystem.SupportsInitializing()) {
if (diskSystemName == diskSystem.PrettyName()) {
found = true;
break;
}
}
}
char message[512];
if (!found) {
snprintf(message, sizeof(message), B_TRANSLATE("Disk system \"%s\"\" "
"not found!"));
_DisplayPartitionError(message);
return;
}
if (diskSystem.IsFileSystem()) {
if (disk->ID() == selectedPartition) {
snprintf(message, sizeof(message), B_TRANSLATE("Are you sure you "
"want to format a raw disk? (most people initialize the disk "
"with a partitioning system first) You will be asked "
"again before changes are written to the disk."));
} else if (partition->ContentName()
&& strlen(partition->ContentName()) > 0) {
snprintf(message, sizeof(message), B_TRANSLATE("Are you sure you "
"want to format the partition \"%s\"? You will be asked "
"again before changes are written to the disk."),
partition->ContentName());
} else {
snprintf(message, sizeof(message), B_TRANSLATE("Are you sure you "
"want to format the partition? You will be asked again "
"before changes are written to the disk."));
}
} else {
snprintf(message, sizeof(message), B_TRANSLATE("Are you sure you "
"want to initialize the selected disk? All data will be lost. "
"You will be asked again before changes are written to the "
"disk.\n"));
}
BAlert* alert = new BAlert("first notice", message,
B_TRANSLATE("Continue"), B_TRANSLATE("Cancel"), NULL,
B_WIDTH_FROM_WIDEST, B_WARNING_ALERT);
int32 choice = alert->Go();
if (choice == 1)
return;
ModificationPreparer modificationPreparer(disk);
status_t ret = modificationPreparer.ModificationStatus();
if (ret != B_OK) {
_DisplayPartitionError(B_TRANSLATE("There was an error preparing the "
"disk for modifications."), NULL, ret);
return;
}
BString name;
BString parameters;
// TODO: diskSystem.IsFileSystem() seems like a better fit here?
if (diskSystemName == "Be File System") {
InitParamsPanel* panel = new InitParamsPanel(this, diskSystemName,
partition);
if (panel->Go(name, parameters) == GO_CANCELED)
return;
} else if (diskSystemName == "Intel Partition Map") {
// TODO: parameters?
} else if (diskSystemName == "Intel Extended Partition") {
// TODO: parameters?
}
bool supportsName = diskSystem.SupportsContentName();
BString validatedName(name);
ret = partition->ValidateInitialize(diskSystem.PrettyName(),
supportsName ? &validatedName : NULL, parameters.String());
if (ret != B_OK) {
_DisplayPartitionError(B_TRANSLATE("Validation of the given "
"initialization parameters failed."), partition, ret);
return;
}
BString previousName = partition->ContentName();
ret = partition->Initialize(diskSystem.PrettyName(),
supportsName ? validatedName.String() : NULL, parameters.String());
if (ret != B_OK) {
_DisplayPartitionError(B_TRANSLATE("Initialization of the partition "
"%s failed. (Nothing has been written to disk.)"), partition, ret);
return;
}
// everything looks fine, we are ready to actually write the changes
// to disk
// Warn the user one more time...
if (previousName.Length() > 0) {
if (partition->IsDevice()) {
snprintf(message, sizeof(message), B_TRANSLATE("Are you sure you "
"want to write the changes back to disk now?\n\n"
"All data on the disk %s will be irretrievably lost if you "
"do so!"), previousName.String());
} else {
snprintf(message, sizeof(message), B_TRANSLATE("Are you sure you "
"want to write the changes back to disk now?\n\n"
"All data on the partition %s will be irretrievably lost if you "
"do so!"), previousName.String());
}
} else {
if (partition->IsDevice()) {
snprintf(message, sizeof(message), B_TRANSLATE("Are you sure you "
"want to write the changes back to disk now?\n\n"
"All data on the selected disk will be irretrievably lost if "
"you do so!"));
} else {
snprintf(message, sizeof(message), B_TRANSLATE("Are you sure you "
"want to write the changes back to disk now?\n\n"
"All data on the selected partition will be irretrievably lost "
"if you do so!"));
}
}
alert = new BAlert("final notice", message,
B_TRANSLATE("Write changes"), B_TRANSLATE("Cancel"), NULL,
B_WIDTH_FROM_WIDEST, B_WARNING_ALERT);
choice = alert->Go();
if (choice == 1)
return;
// commit
ret = modificationPreparer.CommitModifications();
// The partition pointer is toast now! Use the partition ID to
// retrieve it again.
partition = disk->FindDescendant(selectedPartition);
if (ret == B_OK) {
if (diskSystem.IsFileSystem()) {
_DisplayPartitionError(B_TRANSLATE("The partition %s has been "
"successfully formatted.\n"), partition);
} else {
_DisplayPartitionError(B_TRANSLATE("The disk has been "
"successfully initialized.\n"), partition);
}
} else {
if (diskSystem.IsFileSystem()) {
_DisplayPartitionError(B_TRANSLATE("Failed to format the "
"partition %s!\n"), partition, ret);
} else {
_DisplayPartitionError(B_TRANSLATE("Failed to initialize the "
"disk %s!\n"), partition, ret);
}
}
_ScanDrives();
}
void
MainWindow::_UpdateMenus(BDiskDevice* disk,
partition_id selectedPartition, partition_id parentID)
{
while (BMenuItem* item = fFormatMenu->RemoveItem(0L))
delete item;
while (BMenuItem* item = fDiskInitMenu->RemoveItem(0L))
delete item;
fCreateMI->SetEnabled(false);
fUnmountMI->SetEnabled(false);
fDiskInitMenu->SetEnabled(false);
fFormatMenu->SetEnabled(false);
if (!disk) {
fWipeMI->SetEnabled(false);
fEjectMI->SetEnabled(false);
fSurfaceTestMI->SetEnabled(false);
} else {
// fWipeMI->SetEnabled(true);
fWipeMI->SetEnabled(false);
fEjectMI->SetEnabled(disk->IsRemovableMedia());
// fSurfaceTestMI->SetEnabled(true);
fSurfaceTestMI->SetEnabled(false);
// Create menu and items
BPartition* parentPartition = NULL;
if (selectedPartition <= -2) {
// a partitionable space item is selected
parentPartition = disk->FindDescendant(parentID);
}
if (parentPartition && parentPartition->ContainsPartitioningSystem())
fCreateMI->SetEnabled(true);
bool prepared = disk->PrepareModifications() == B_OK;
fFormatMenu->SetEnabled(prepared);
fDeleteMI->SetEnabled(prepared);
BPartition* partition = disk->FindDescendant(selectedPartition);
BDiskSystem diskSystem;
fDDRoster.RewindDiskSystems();
while (fDDRoster.GetNextDiskSystem(&diskSystem) == B_OK) {
if (!diskSystem.SupportsInitializing())
continue;
BMessage* message = new BMessage(MSG_INITIALIZE);
message->AddInt32("parent id", parentID);
message->AddString("disk system", diskSystem.PrettyName());
BString label = diskSystem.PrettyName();
label << B_UTF8_ELLIPSIS;
BMenuItem* item = new BMenuItem(label.String(), message);
// TODO: Very unintuitive that we have to use PrettyName (vs Name)
item->SetEnabled(partition != NULL
&& partition->CanInitialize(diskSystem.PrettyName()));
if (disk->ID() == selectedPartition
&& !diskSystem.IsFileSystem()) {
// Disk is selected, and DiskSystem is a partition map
fDiskInitMenu->AddItem(item);
} else if (diskSystem.IsFileSystem()) {
// Otherwise a filesystem
fFormatMenu->AddItem(item);
}
}
// Mount items
if (partition) {
fFormatMenu->SetEnabled(!partition->IsMounted()
&& !partition->IsReadOnly()
&& partition->Device()->HasMedia()
&& fFormatMenu->CountItems() > 0);
fDiskInitMenu->SetEnabled(!partition->IsMounted()
&& !partition->IsReadOnly()
&& partition->Device()->HasMedia()
&& partition->IsDevice()
&& fDiskInitMenu->CountItems() > 0);
fDeleteMI->SetEnabled(!partition->IsMounted()
&& !partition->IsDevice());
fMountMI->SetEnabled(!partition->IsMounted());
bool unMountable = false;
if (partition->IsMounted()) {
// see if this partition is the boot volume
BVolume volume;
BVolume bootVolume;
if (BVolumeRoster().GetBootVolume(&bootVolume) == B_OK
&& partition->GetVolume(&volume) == B_OK) {
unMountable = volume != bootVolume;
} else
unMountable = true;
}
fUnmountMI->SetEnabled(unMountable);
} else {
fDeleteMI->SetEnabled(false);
fMountMI->SetEnabled(false);
fFormatMenu->SetEnabled(false);
fDiskInitMenu->SetEnabled(false);
}
if (prepared)
disk->CancelModifications();
fMountAllMI->SetEnabled(true);
}
if (selectedPartition < 0) {
fDeleteMI->SetEnabled(false);
fMountMI->SetEnabled(false);
}
}
// main
int
main(int argc, const char *const *argv)
{
kArgc = argc;
kArgv = argv;
if (argc < 2)
print_usage_and_exit(true);
// parameters
const char **files = new const char*[argc];
int fileCount = 0;
bool dryRun = false;
off_t startOffset = 0;
// parse arguments
for (int argi = 1; argi < argc;) {
const char *arg = argv[argi++];
if (arg[0] == '-') {
if (strcmp(arg, "-h") == 0 || strcmp(arg, "--help") == 0) {
print_usage_and_exit(false);
} else if (strcmp(arg, "--dry-run") == 0) {
dryRun = true;
} else if (strcmp(arg, "-alert") == 0) {
// ignore
} else if (strcmp(arg, "-full") == 0) {
// ignore
} else if (strcmp(arg, "--start-offset") == 0) {
if (argi >= argc)
print_usage_and_exit(true);
startOffset = strtoll(argv[argi++], NULL, 0);
} else if (strcmp(arg, "-safe") == 0) {
fprintf(stderr, "Error: Sorry, BeOS R3 isn't supported!\n");
exit(1);
} else {
print_usage_and_exit(true);
}
} else {
files[fileCount++] = arg;
}
}
// we need at least one file
if (fileCount == 0)
print_usage_and_exit(true);
// read the boot code
uint8 *bootCodeData = NULL;
#ifndef __ANTARES__
bootCodeData = read_boot_code_data(argv[0]);
#else
image_info info;
if (find_own_image(&info) == B_OK)
bootCodeData = read_boot_code_data(info.name);
#endif
if (!bootCodeData) {
fprintf(stderr, "Error: Failed to read \n");
exit(1);
}
// iterate through the files and make them bootable
status_t error;
for (int i = 0; i < fileCount; i++) {
const char *fileName = files[i];
BEntry entry;
error = entry.SetTo(fileName, true);
if (error != B_OK) {
fprintf(stderr, "Error: Failed to open \"%s\": %s\n",
fileName, strerror(error));
exit(1);
}
// get stat to check the type of the file
struct stat st;
error = entry.GetStat(&st);
if (error != B_OK) {
fprintf(stderr, "Error: Failed to stat \"%s\": %s\n",
fileName, strerror(error));
exit(1);
}
bool noPartition = false;
int64 partitionOffset = 0;
fs_info info; // needs to be here (we use the device name later)
if (S_ISDIR(st.st_mode)) {
#if defined(__BEOS__) || defined(__ANTARES__)
// a directory: get the device
error = fs_stat_dev(st.st_dev, &info);
if (error != B_OK) {
fprintf(stderr, "Error: Failed to determine device for "
"\"%s\": %s\n", fileName, strerror(error));
exit(1);
}
fileName = info.device_name;
#else
(void)info;
fprintf(stderr, "Error: Specifying directories not supported "
"on this platform!\n");
exit(1);
#endif
} else if (S_ISREG(st.st_mode)) {
// a regular file: fine
noPartition = true;
} else if (S_ISCHR(st.st_mode)) {
// character special: a device or partition under BeOS
// or under FreeBSD
#if !(defined(__BEOS__) || defined(__ANTARES__)) && !defined(ANTARES_HOST_PLATFORM_FREEBSD)
fprintf(stderr, "Error: Character special devices not "
"supported on this platform.\n");
exit(1);
#endif
#ifdef ANTARES_HOST_PLATFORM_FREEBSD
// chop off the trailing number
int fileNameLen = strlen(fileName);
int baseNameLen = -1;
for (int k = fileNameLen - 1; k >= 0; k--) {
if (!isdigit(fileName[k])) {
baseNameLen = k + 1;
break;
}
}
// Remove de 's' from 'ad2s2' slice device (partition for DOS
// users) to get 'ad2' base device
baseNameLen--;
if (baseNameLen < 0) {
// only digits?
fprintf(stderr, "Error: Failed to get base device name.\n");
exit(1);
}
if (baseNameLen < fileNameLen) {
// get base device name and partition index
char baseDeviceName[B_PATH_NAME_LENGTH];
int partitionIndex = atoi(fileName + baseNameLen + 1);
// Don't forget the 's' of slice :)
memcpy(baseDeviceName, fileName, baseNameLen);
baseDeviceName[baseNameLen] = '\0';
// open base device
int baseFD = open(baseDeviceName, O_RDONLY);
if (baseFD < 0) {
fprintf(stderr, "Error: Failed to open \"%s\": %s\n",
baseDeviceName, strerror(errno));
exit(1);
}
// get device size
int64 deviceSize;
if (ioctl(baseFD, DIOCGMEDIASIZE, &deviceSize) == -1) {
fprintf(stderr, "Error: Failed to get device geometry "
"for \"%s\": %s\n", baseDeviceName,
strerror(errno));
exit(1);
}
// parse the partition map
// TODO: block size!
PartitionMapParser parser(baseFD, 0, deviceSize, 512);
PartitionMap map;
error = parser.Parse(NULL, &map);
if (error != B_OK) {
fprintf(stderr, "Error: Parsing partition table on "
"device \"%s\" failed: %s\n", baseDeviceName,
strerror(error));
exit(1);
}
close(baseFD);
// check the partition we are supposed to write at
Partition *partition = map.PartitionAt(partitionIndex - 1);
if (!partition || partition->IsEmpty()) {
fprintf(stderr, "Error: Invalid partition index %d.\n",
partitionIndex);
dump_partition_map(map);
exit(1);
}
if (partition->IsExtended()) {
fprintf(stderr, "Error: Partition %d is an extended "
"partition.\n", partitionIndex);
dump_partition_map(map);
exit(1);
}
partitionOffset = partition->Offset();
} else {
// The given device is the base device. We'll write at
// offset 0.
}
#endif // ANTARES_HOST_PLATFORM_FREEBSD
} else if (S_ISBLK(st.st_mode)) {
// block device: a device or partition under Linux or Darwin
#ifdef ANTARES_HOST_PLATFORM_LINUX
// chop off the trailing number
int fileNameLen = strlen(fileName);
int baseNameLen = -1;
for (int k = fileNameLen - 1; k >= 0; k--) {
if (!isdigit(fileName[k])) {
baseNameLen = k + 1;
break;
}
}
if (baseNameLen < 0) {
// only digits?
fprintf(stderr, "Error: Failed to get base device name.\n");
exit(1);
}
if (baseNameLen < fileNameLen) {
// get base device name and partition index
char baseDeviceName[B_PATH_NAME_LENGTH];
int partitionIndex = atoi(fileName + baseNameLen);
memcpy(baseDeviceName, fileName, baseNameLen);
baseDeviceName[baseNameLen] = '\0';
// open base device
int baseFD = open(baseDeviceName, O_RDONLY);
if (baseFD < 0) {
fprintf(stderr, "Error: Failed to open \"%s\": %s\n",
baseDeviceName, strerror(errno));
exit(1);
}
// get device size -- try BLKGETSIZE64, but, if it doesn't
// work, fall back to the obsolete HDIO_GETGEO
int64 deviceSize;
hd_geometry geometry;
if (ioctl(baseFD, BLKGETSIZE64, &deviceSize) == 0
&& deviceSize > 0) {
// looks good
} else if (ioctl(baseFD, HDIO_GETGEO, &geometry) == 0) {
deviceSize = (int64)geometry.heads * geometry.sectors
* geometry.cylinders * 512;
} else {
fprintf(stderr, "Error: Failed to get device geometry "
"for \"%s\": %s\n", baseDeviceName,
strerror(errno));
exit(1);
}
// parse the partition map
// TODO: block size!
PartitionMapParser parser(baseFD, 0, deviceSize, 512);
PartitionMap map;
error = parser.Parse(NULL, &map);
if (error != B_OK) {
fprintf(stderr, "Error: Parsing partition table on "
"device \"%s\" failed: %s\n", baseDeviceName,
strerror(error));
exit(1);
}
close(baseFD);
// check the partition we are supposed to write at
Partition *partition = map.PartitionAt(partitionIndex - 1);
if (!partition || partition->IsEmpty()) {
fprintf(stderr, "Error: Invalid partition index %d.\n",
partitionIndex);
dump_partition_map(map);
exit(1);
}
if (partition->IsExtended()) {
fprintf(stderr, "Error: Partition %d is an extended "
"partition.\n", partitionIndex);
dump_partition_map(map);
exit(1);
}
partitionOffset = partition->Offset();
} else {
// The given device is the base device. We'll write at
// offset 0.
}
#elif defined(ANTARES_HOST_PLATFORM_DARWIN)
// chop off the trailing number
int fileNameLen = strlen(fileName);
int baseNameLen = fileNameLen - 2;
// get base device name and partition index
char baseDeviceName[B_PATH_NAME_LENGTH];
int partitionIndex = atoi(fileName + baseNameLen + 1);
memcpy(baseDeviceName, fileName, baseNameLen);
baseDeviceName[baseNameLen] = '\0';
// open base device
int baseFD = open(baseDeviceName, O_RDONLY);
if (baseFD < 0) {
fprintf(stderr, "Error: Failed to open \"%s\": %s\n",
baseDeviceName, strerror(errno));
exit(1);
}
// get device size
int64 blockSize;
int64 blockCount;
int64 deviceSize;
if (ioctl(baseFD, DKIOCGETBLOCKSIZE, &blockSize) == -1) {
fprintf(stderr, "Error: Failed to get block size "
"for \"%s\": %s\n", baseDeviceName,
strerror(errno));
exit(1);
}
if (ioctl(baseFD, DKIOCGETBLOCKCOUNT, &blockCount) == -1) {
fprintf(stderr, "Error: Failed to get block count "
"for \"%s\": %s\n", baseDeviceName,
strerror(errno));
exit(1);
}
deviceSize = blockSize * blockCount;
// parse the partition map
PartitionMapParser parser(baseFD, 0, deviceSize, blockSize);
PartitionMap map;
error = parser.Parse(NULL, &map);
if (error != B_OK) {
fprintf(stderr, "Error: Parsing partition table on "
"device \"%s\" failed: %s\n", baseDeviceName,
strerror(error));
exit(1);
}
close(baseFD);
// check the partition we are supposed to write at
Partition *partition = map.PartitionAt(partitionIndex - 1);
if (!partition || partition->IsEmpty()) {
fprintf(stderr, "Error: Invalid partition index %d.\n",
partitionIndex);
dump_partition_map(map);
exit(1);
}
if (partition->IsExtended()) {
fprintf(stderr, "Error: Partition %d is an extended "
"partition.\n", partitionIndex);
dump_partition_map(map);
exit(1);
}
partitionOffset = partition->Offset();
#else
// partitions are block devices under Antares, but not under BeOS
#ifndef __ANTARES__
fprintf(stderr, "Error: Block devices not supported on this "
"platform!\n");
exit(1);
#endif // __ANTARES__
#endif
} else {
fprintf(stderr, "Error: File type of \"%s\" is not supported.\n",
fileName);
exit(1);
}
// open the file
int fd = open(fileName, O_RDWR);
if (fd < 0) {
fprintf(stderr, "Error: Failed to open \"%s\": %s\n", fileName,
strerror(errno));
exit(1);
}
#if (defined(__BEOS__) || defined(__ANTARES__))
// get a partition info
if (!noPartition
&& strlen(fileName) >= 3
&& strncmp("raw", fileName + strlen(fileName) - 3, 3)) {
partition_info partitionInfo;
if (ioctl(fd, B_GET_PARTITION_INFO, &partitionInfo,
sizeof(partitionInfo)) == 0) {
partitionOffset = partitionInfo.offset;
} else {
fprintf(stderr, "Error: Failed to get partition info: %s\n",
strerror(errno));
exit(1);
}
}
#endif // __BEOS__
// adjust the partition offset in the boot code data
// hard coded sector size: 512 bytes
*(uint32*)(bootCodeData + kPartitionOffsetOffset)
= B_HOST_TO_LENDIAN_INT32((uint32)(partitionOffset / 512));
// write the boot code
printf("Writing boot code to \"%s\" (partition offset: %" B_PRId64
" bytes, start offset = %" B_PRIdOFF ") "
"...\n", fileName, partitionOffset, startOffset);
write_boot_code_part(fileName, fd, startOffset, bootCodeData, 0,
kFirstBootCodePartSize, dryRun);
write_boot_code_part(fileName, fd, startOffset, bootCodeData,
kSecondBootCodePartOffset, kSecondBootCodePartSize,
dryRun);
#ifdef __ANTARES__
// check if this partition is mounted
BDiskDeviceRoster roster;
BPartition* partition;
BDiskDevice device;
status_t status = roster.GetPartitionForPath(fileName, &device,
&partition);
if (status != B_OK) {
status = roster.GetFileDeviceForPath(fileName, &device);
if (status == B_OK)
partition = &device;
}
if (status == B_OK && partition->IsMounted() && !dryRun) {
// This partition is mounted, we need to tell BFS to update its
// boot block (we are using part of the same logical block).
BPath path;
status = partition->GetMountPoint(&path);
if (status == B_OK) {
update_boot_block update;
update.offset = kSecondBootCodePartOffset - 512;
update.data = bootCodeData + kSecondBootCodePartOffset;
update.length = kSecondBootCodePartSize;
int mountFD = open(path.Path(), O_RDONLY);
if (ioctl(mountFD, BFS_IOCTL_UPDATE_BOOT_BLOCK, &update,
sizeof(update_boot_block)) != 0) {
fprintf(stderr, "Could not update BFS boot block: %s\n",
strerror(errno));
}
close(mountFD);
} else {
fprintf(stderr, "Could not update BFS boot code while the "
"partition is mounted!\n");
}
}
#endif // __ANTARES__
close(fd);
}
return 0;
}
