void
dlgAirspaceWarningInit(SingleWindow &parent)
{
wf = LoadDialog(CallBackTable,
parent,
_T("IDR_XML_AIRSPACEWARNING"));
if (wf == NULL)
return;
wf->SetKeyDownNotify(OnKeyDown);
wf->SetTimerNotify(OnTimer);
hBrushInsideBk.set(Color(254,50,50));
hBrushNearBk.set(Color(254,254,50));
hBrushInsideAckBk.set(Color(254,100,100));
hBrushNearAckBk.set(Color(254,254,100));
wAirspaceList = (WndListFrame*)wf->FindByName(_T("frmAirspaceWarningList"));
wAirspaceList->SetPaintItemCallback(OnAirspaceListItemPaint);
wAirspaceList->SetCursorCallback(AirspaceWarningCursorCallback);
if (!has_pointer())
/* on platforms without a pointing device (e.g. ALTAIR), allow
"focusing" an airspace by pressing enter */
wAirspaceList->SetActivateCallback(OnAirspaceListEnter);
}
/**
* Draw a line using either drawSoftLine or drawHardLine, depending on
* the subpixel hint of the brush.
* @param context drawing context id (needed for indirect drawing)
*/
void Layer::drawLine(int contextId, const Brush& brush, const Point& from, const Point& to, StrokeState &state)
{
Brush effective_brush = brush;
Layer *l = this;
if(!brush.incremental()) {
// Indirect brush: use a sublayer
l = getSubLayer(contextId, brush.blendingMode(), brush.opacity(1) * 255);
effective_brush.setOpacity(1.0);
effective_brush.setOpacity2(brush.isOpacityVariable() ? 0.0 : 1.0);
effective_brush.setBlendingMode(BlendMode::MODE_NORMAL);
} else if(contextId<0) {
// Special case: negative context IDs are temporary overlay strokes
l = getSubLayer(contextId, brush.blendingMode(), 255);
effective_brush.setBlendingMode(BlendMode::MODE_NORMAL);
}
if(effective_brush.subpixel())
l->drawSoftLine(effective_brush, from, to, state);
else
l->drawHardLine(effective_brush, from, to, state);
if(_owner)
_owner->notifyAreaChanged();
}
/**
* This function is optimized for drawing with subpixel precision.
* @param brush brush to draw the line with
* @param from starting point
* @param to ending point
* @param distance distance from previous dab.
*/
void Layer::drawSoftLine(const Brush& brush, const Point& from, const Point& to, StrokeState &state)
{
qreal dx = to.x() - from.x();
qreal dy = to.y() - from.y();
const qreal dist = hypot(dx, dy);
dx = dx / dist;
dy = dy / dist;
const qreal dp = (to.pressure() - from.pressure()) / dist;
const qreal spacing0 = qMax(1.0, brush.spacingDist(from.pressure()));
qreal i;
if(state.distance>=spacing0)
i = 0;
else if(state.distance==0)
i = spacing0;
else
i = state.distance;
Point p(from.x() + dx*i, from.y() + dy*i, qBound(0.0, from.pressure() + dp*i, 1.0));
while(i<=dist) {
const qreal spacing = qMax(1.0, brush.spacingDist(p.pressure()));
directDab(brush, p, state);
p.rx() += dx * spacing;
p.ry() += dy * spacing;
p.setPressure(qBound(0.0, p.pressure() + dp * spacing, 1.0));
i += spacing;
}
state.distance = i-dist;
}
void Layer::dab(int contextId, const Brush &brush, const Point &point, StrokeState &state)
{
Brush effective_brush = brush;
Layer *l = this;
if(!brush.incremental()) {
// Indirect brush: use a sublayer
l = getSubLayer(contextId, brush.blendingMode(), brush.opacity(1) * 255);
effective_brush.setOpacity(1.0);
effective_brush.setOpacity2(brush.isOpacityVariable() ? 0.0 : 1.0);
effective_brush.setBlendingMode(BlendMode::MODE_NORMAL);
} else if(contextId<0) {
// Special case: negative context IDs are temporary overlay strokes
l = getSubLayer(contextId, brush.blendingMode(), 255);
effective_brush.setBlendingMode(BlendMode::MODE_NORMAL);
}
Point p = point;
if(!effective_brush.subpixel()) {
p.setX(qFloor(p.x()));
p.setY(qFloor(p.y()));
}
l->directDab(effective_brush, p, state);
if(_owner)
_owner->notifyAreaChanged();
}
void DrawFilledRectangle(int left, int top, int right, int bottom,
const Brush &brush) {
if (brush.IsHollow())
return;
DrawFilledRectangle(left, top, right, bottom, brush.GetColor());
}
/**
* @brief Creates a cube out of the given mins and maxs of the axis aligned bounding box
* @param[out] The brush to creates the planes for
* @param[in] bounds The mins and maxs of the cube
* @param[in] shader The path of the texture relative to the base dir
* @param[in] projection The texture projection that is used (shift, scale and rotate values)
*/
void Cuboid::generate (Brush& brush, const AABB& bounds, std::size_t sides, const TextureProjection& projection,
const std::string& shader)
{
const unsigned char box[3][2] = { { 0, 1 }, { 2, 0 }, { 1, 2 } };
Vector3 mins(bounds.origin - bounds.extents);
Vector3 maxs(bounds.origin + bounds.extents);
brush.clear();
brush.reserve(6);
{
for (int i = 0; i < 3; ++i) {
Vector3 planepts1(maxs);
Vector3 planepts2(maxs);
planepts2[box[i][0]] = mins[box[i][0]];
planepts1[box[i][1]] = mins[box[i][1]];
brush.addPlane(maxs, planepts1, planepts2, shader, projection);
}
}
{
for (int i = 0; i < 3; ++i) {
Vector3 planepts1(mins);
Vector3 planepts2(mins);
planepts1[box[i][0]] = maxs[box[i][0]];
planepts2[box[i][1]] = maxs[box[i][1]];
brush.addPlane(mins, planepts1, planepts2, shader, projection);
}
}
}
void mergeSelectedBrushes(const cmd::ArgumentList& args)
{
// Get the current selection
BrushPtrVector brushes = selection::algorithm::getSelectedBrushes();
if (brushes.empty()) {
rMessage() << _("CSG Merge: No brushes selected.") << std::endl;
wxutil::Messagebox::ShowError(_("CSG Merge: No brushes selected."));
return;
}
if (brushes.size() < 2) {
rMessage() << "CSG Merge: At least two brushes have to be selected.\n";
wxutil::Messagebox::ShowError("CSG Merge: At least two brushes have to be selected.");
return;
}
rMessage() << "CSG Merge: Merging " << brushes.size() << " brushes." << std::endl;
UndoableCommand undo("mergeSelectedBrushes");
// Take the last selected node as reference for layers and parent
scene::INodePtr merged = GlobalSelectionSystem().ultimateSelected();
scene::INodePtr parent = merged->getParent();
assert(parent != NULL);
// Create a new BrushNode
scene::INodePtr node = GlobalBrushCreator().createBrush();
// Insert the newly created brush into the (same) parent entity
parent->addChildNode(node);
// Move the new brush to the same layers as the merged one
node->assignToLayers(merged->getLayers());
// Get the contained brush
Brush* brush = Node_getBrush(node);
// Attempt to merge the selected brushes into the new one
if (!Brush_merge(*brush, brushes, true))
{
rWarning() << "CSG Merge: Failed - result would not be convex." << std::endl;
return;
}
ASSERT_MESSAGE(!brush->empty(), "brush left with no faces after merge");
// Remove the original brushes
for (BrushPtrVector::iterator i = brushes.begin(); i != brushes.end(); ++i)
{
scene::removeNodeFromParent(*i);
}
// Select the new brush
Node_setSelected(node, true);
rMessage() << "CSG Merge: Succeeded." << std::endl;
SceneChangeNotify();
}
void Brush_ConstructCuboid(Brush& brush, const AABB& bounds, const char* shader, const TextureProjection& projection)
{
const unsigned char box[3][2] = { { 0, 1 }, { 2, 0 }, { 1, 2 } };
Vector3 mins(vector3_subtracted(bounds.origin, bounds.extents));
Vector3 maxs(vector3_added(bounds.origin, bounds.extents));
brush.undoSave();
brush.clear();
brush.reserve(6);
{
for(int i=0; i < 3; ++i)
{
Vector3 planepts1(maxs);
Vector3 planepts2(maxs);
planepts2[box[i][0]] = mins[box[i][0]];
planepts1[box[i][1]] = mins[box[i][1]];
brush.addPlane(maxs, planepts1, planepts2, shader, projection);
}
}
{
for(int i=0; i < 3; ++i)
{
Vector3 planepts1(mins);
Vector3 planepts2(mins);
planepts1[box[i][0]] = maxs[box[i][0]];
planepts2[box[i][1]] = maxs[box[i][1]];
brush.addPlane(mins, planepts1, planepts2, shader, projection);
}
}
}
void MenuImageItem::onDraw()
{
Brush* brush = Brush::getSingletonPtr();
brush->setFilterMode(mDesc->widget_brushFilterMode);
brush->drawSkinElement(Rect(mTexturePosition,mWidgetDesc->widget_dimensions.size),mSkinElement);
}
void DrawFilledRectangle(PixelScalar left, PixelScalar top,
PixelScalar right, PixelScalar bottom,
const Brush &brush) {
if (brush.IsHollow())
return;
DrawFilledRectangle(left, top, right, bottom, brush.GetColor());
}
//------------------------------------------------------------------------------
void
Canvas::DrawFilledRectangle(int left, int top,
int right, int bottom,
const Brush &brush)
{
if (!brush.IsHollow())
this->DrawFilledRectangle(left, top, right, bottom, brush.GetColor());
}
void MenuPanel::onDraw()
{
Brush* brush = Brush::getSingletonPtr();
brush->setFilterMode(mDesc->widget_brushFilterMode);
brush->drawSkinElement(Rect(Point::ZERO,mWidgetDesc->widget_dimensions.size),mSkinElement);
}
void
Border::Render (cairo_t *cr, Region *region, bool path_only)
{
Brush *background = GetBackground ();
Brush *border_brush = GetBorderBrush ();
cairo_save (cr);
if (!path_only)
RenderLayoutClip (cr);
CornerRadius r = *GetCornerRadius ();
CornerRadius *round = &r;
Thickness thickness = *GetBorderThickness ();
Rect paint_border = extents;
Rect paint_background = paint_border.GrowBy (-thickness);
CornerRadius inner_adjusted = *round;
inner_adjusted.topLeft = MAX (round->topLeft - MAX (thickness.left, thickness.top) * .5, 0);
inner_adjusted.topRight = MAX (round->topRight - MAX (thickness.right, thickness.top) * .5, 0);
inner_adjusted.bottomRight = MAX (round->bottomRight - MAX (thickness.right, thickness.bottom) * .5, 0);
inner_adjusted.bottomLeft = MAX (round->bottomLeft - MAX (thickness.left, thickness.bottom) * .5, 0);
CornerRadius outer_adjusted = *round;
outer_adjusted.topLeft = outer_adjusted.topLeft ? MAX (round->topLeft + MAX (thickness.left, thickness.top) * .5, 0) : 0;
outer_adjusted.topRight = outer_adjusted.topRight ? MAX (round->topRight + MAX (thickness.right, thickness.top) * .5, 0) : 0;
outer_adjusted.bottomRight = outer_adjusted.bottomRight ? MAX (round->bottomRight + MAX (thickness.right, thickness.bottom) * .5, 0) : 0;
outer_adjusted.bottomLeft = outer_adjusted.bottomLeft ? MAX (round->bottomLeft + MAX (thickness.left, thickness.bottom) * .5, 0) : 0;
/*
* NOTE filling this way can leave alpha artifacts between the border fill and bg fill
* but some simple inspection of the ms results make me think that is what happens there
* too.
*/
cairo_new_path (cr);
cairo_set_fill_rule (cr, CAIRO_FILL_RULE_EVEN_ODD);
if (border_brush && !paint_border.IsEmpty ()) {
border_brush->SetupBrush (cr, paint_border);
paint_border.Draw (cr, &outer_adjusted);
paint_background.Draw (cr, &inner_adjusted);
if (!path_only)
border_brush->Fill (cr);
}
if (background && !paint_background.IsEmpty ()) {
background->SetupBrush (cr, paint_background);
paint_background.Draw (cr, &inner_adjusted);
if (!path_only)
background->Fill (cr);
}
cairo_restore (cr);
}
// virtual
void Polyline::OnRender(Graphics* pGraphics)
{
PointCollection* points = get_Points();
if (points)
{
unsigned int count = points->GetCount();
if (count > 0)
{
__release<LDraw::GraphicsPathF> path = new LDraw::GraphicsPathF;
Point point = points->get_Item(0);
path->AddMove(point.X, point.Y);
for (unsigned int i = 1; i < count; i++)
{
point = points->get_Item(i);
path->AddLine(point.X, point.Y);
}
Brush* Fill = get_Fill();
if (Fill)
{
__release<LDraw::Brush> brush = Fill->CreateBrush(this, 1, 1);
if (brush != NULL)
{
pGraphics->FillPath(brush, path);
}
}
#if 0
double StrokeThickness;
if (m_StrokeThickness)
m_StrokeThickness->get_Value(&StrokeThickness);
else
StrokeThickness = 1;
if (StrokeThickness > 0)
{
CComQIPtr<CLXUIElementImplImpl> Stroke(m_Stroke);
if (Stroke)
{
Gdiplus::Brush* pBrush = Stroke->CreateBrush(this, 1, 1);
if (pBrush)
{
Gdiplus::Pen pen(pBrush, StrokeThickness);
pGraphics->DrawPath(pen, &path);
delete pBrush;
}
}
}
#endif
}
}
}
Rect
Canvas::GetCoverageBounds ()
{
Brush *background = GetBackground ();
if (background && background->IsOpaque ())
return coverage_bounds;
return Rect ();
}
bool Brush_hasShader(const Brush& brush, const char* name)
{
for(Brush::const_iterator i = brush.begin(); i != brush.end(); ++i)
{
if(shader_equal((*i)->GetShader(), name))
{
return true;
}
}
return false;
}
void Cone::generate (Brush& brush, const AABB& bounds, std::size_t sides, const TextureProjection& projection,
const std::string& shader)
{
if (sides < _minSides) {
gtkutil::errorDialog(_("Too few sides for constructing the prism, minimum is 3"));
return;
}
if (sides > _maxSides) {
gtkutil::errorDialog(_("Too many sides for constructing the prism, maximum is 32"));
return;
}
brush.clear();
brush.reserve(sides + 1);
Vector3 mins(bounds.origin - bounds.extents);
Vector3 maxs(bounds.origin + bounds.extents);
float radius = maxExtent(bounds.extents);
const Vector3& mid = bounds.origin;
Vector3 planepts[3];
planepts[0][0] = mins[0];
planepts[0][1] = mins[1];
planepts[0][2] = mins[2];
planepts[1][0] = maxs[0];
planepts[1][1] = mins[1];
planepts[1][2] = mins[2];
planepts[2][0] = maxs[0];
planepts[2][1] = maxs[1];
planepts[2][2] = mins[2];
brush.addPlane(planepts[0], planepts[1], planepts[2], shader, projection);
for (std::size_t i = 0; i < sides; ++i) {
double sv = sin(i * 3.14159265 * 2 / sides);
double cv = cos(i * 3.14159265 * 2 / sides);
planepts[0][0] = static_cast<float> (floor(mid[0] + radius * cv + 0.5));
planepts[0][1] = static_cast<float> (floor(mid[1] + radius * sv + 0.5));
planepts[0][2] = mins[2];
planepts[1][0] = mid[0];
planepts[1][1] = mid[1];
planepts[1][2] = maxs[2];
planepts[2][0] = static_cast<float> (floor(planepts[0][0] - radius * sv + 0.5));
planepts[2][1] = static_cast<float> (floor(planepts[0][1] + radius * cv + 0.5));
planepts[2][2] = maxs[2];
brush.addPlane(planepts[0], planepts[1], planepts[2], shader, projection);
}
}
bool Brush::intersectsBrush(const Brush& brush) const {
if (!bounds().intersects(brush.bounds()))
return false;
// separating axis theorem
// http://www.geometrictools.com/Documentation/MethodOfSeparatingAxes.pdf
FaceList::const_iterator faceIt, faceEnd;
const VertexList& myVertices = vertices();
const FaceList& theirFaces = brush.faces();
for (faceIt = theirFaces.begin(), faceEnd = theirFaces.end(); faceIt != faceEnd; ++faceIt) {
const Face& theirFace = **faceIt;
const Vec3f& origin = theirFace.vertices().front()->position;
const Vec3f& direction = theirFace.boundary().normal;
if (vertexStatusFromRay(origin, direction, myVertices) == PointStatus::PSAbove)
return false;
}
const VertexList& theirVertices = brush.vertices();
for (faceIt = m_faces.begin(), faceEnd = m_faces.end(); faceIt != faceEnd; ++faceIt) {
const Face& myFace = **faceIt;
const Vec3f& origin = myFace.vertices().front()->position;
const Vec3f& direction = myFace.boundary().normal;
if (vertexStatusFromRay(origin, direction, theirVertices) == PointStatus::PSAbove)
return false;
}
const EdgeList& myEdges = edges();
const EdgeList& theirEdges = brush.edges();
EdgeList::const_iterator myEdgeIt, myEdgeEnd, theirEdgeIt, theirEdgeEnd;
for (myEdgeIt = myEdges.begin(), myEdgeEnd = myEdges.end(); myEdgeIt != myEdgeEnd; ++myEdgeIt) {
const Edge& myEdge = **myEdgeIt;
for (theirEdgeIt = theirEdges.begin(), theirEdgeEnd = theirEdges.end(); theirEdgeIt != theirEdgeEnd; ++theirEdgeIt) {
const Edge& theirEdge = **theirEdgeIt;
const Vec3f myEdgeVec = myEdge.vector();
const Vec3f theirEdgeVec = theirEdge.vector();
const Vec3f& origin = myEdge.start->position;
const Vec3f direction = crossed(myEdgeVec, theirEdgeVec);
PointStatus::Type myStatus = vertexStatusFromRay(origin, direction, myVertices);
if (myStatus != PointStatus::PSInside) {
PointStatus::Type theirStatus = vertexStatusFromRay(origin, direction, theirVertices);
if (theirStatus != PointStatus::PSInside) {
if (myStatus != theirStatus)
return false;
}
}
}
}
return true;
}
BrushSplitType Brush_classifyPlane(const Brush& brush, const Plane3& plane) {
brush.evaluateBRep();
BrushSplitType split;
for (Brush::const_iterator i(brush.begin()); i != brush.end(); ++i) {
if ((*i)->contributes()) {
split += (*i)->getWinding().classifyPlane(plane);
}
}
return split;
}
void Brush_ConstructSphere(Brush& brush, const AABB& bounds, std::size_t sides, const char* shader, const TextureProjection& projection)
{
if(sides < c_brushSphere_minSides)
{
globalErrorStream() << c_brushSphere_name << ": sides " << Unsigned(sides) << ": too few sides, minimum is " << Unsigned(c_brushSphere_minSides) << "\n";
return;
}
if(sides > c_brushSphere_maxSides)
{
globalErrorStream() << c_brushSphere_name << ": sides " << Unsigned(sides) << ": too many sides, maximum is " << Unsigned(c_brushSphere_maxSides) << "\n";
return;
}
brush.undoSave();
brush.clear();
brush.reserve(sides*sides);
float radius = max_extent(bounds.extents);
const Vector3& mid = bounds.origin;
Vector3 planepts[3];
double dt = 2 * c_pi / sides;
double dp = c_pi / sides;
for(std::size_t i=0; i < sides; i++)
{
for(std::size_t j=0;j < sides-1; j++)
{
double t = i * dt;
double p = float(j * dp - c_pi / 2);
planepts[0] = vector3_added(mid, vector3_scaled(vector3_for_spherical(t, p), radius));
planepts[1] = vector3_added(mid, vector3_scaled(vector3_for_spherical(t, p + dp), radius));
planepts[2] = vector3_added(mid, vector3_scaled(vector3_for_spherical(t + dt, p + dp), radius));
brush.addPlane(planepts[0], planepts[1], planepts[2], shader, projection);
}
}
{
double p = (sides - 1) * dp - c_pi / 2;
for(std::size_t i = 0; i < sides; i++)
{
double t = i * dt;
planepts[0] = vector3_added(mid, vector3_scaled(vector3_for_spherical(t, p), radius));
planepts[1] = vector3_added(mid, vector3_scaled(vector3_for_spherical(t + dt, p + dp), radius));
planepts[2] = vector3_added(mid, vector3_scaled(vector3_for_spherical(t + dt, p), radius));
brush.addPlane(planepts[0], planepts[1], planepts[2], shader, projection);
}
}
}
/** void Brush::setStyle(int style)
* include/mimas/Brush.h:56
*/
static int Brush_setStyle(lua_State *L) {
try {
Brush *self = *((Brush **)dub_checksdata(L, 1, "mimas.Brush"));
int style = dub_checkint(L, 2);
self->setStyle(style);
return 0;
} catch (std::exception &e) {
lua_pushfstring(L, "setStyle: %s", e.what());
} catch (...) {
lua_pushfstring(L, "setStyle: Unknown exception");
}
return dub_error(L);
}
/** void Brush::setColor(const Color &color)
* include/mimas/Brush.h:60
*/
static int Brush_setColor(lua_State *L) {
try {
Brush *self = *((Brush **)dub_checksdata(L, 1, "mimas.Brush"));
Color *color = *((Color **)dub_checksdata(L, 2, "mimas.Color"));
self->setColor(*color);
return 0;
} catch (std::exception &e) {
lua_pushfstring(L, "setColor: %s", e.what());
} catch (...) {
lua_pushfstring(L, "setColor: Unknown exception");
}
return dub_error(L);
}
void Brush_ConstructCone(Brush& brush, const AABB& bounds, std::size_t sides, const char* shader, const TextureProjection& projection)
{
if(sides < c_brushCone_minSides)
{
globalErrorStream() << c_brushCone_name << ": sides " << Unsigned(sides) << ": too few sides, minimum is " << Unsigned(c_brushCone_minSides) << "\n";
return;
}
if(sides > c_brushCone_maxSides)
{
globalErrorStream() << c_brushCone_name << ": sides " << Unsigned(sides) << ": too many sides, maximum is " << Unsigned(c_brushCone_maxSides) << "\n";
return;
}
brush.undoSave();
brush.clear();
brush.reserve(sides+1);
Vector3 mins(vector3_subtracted(bounds.origin, bounds.extents));
Vector3 maxs(vector3_added(bounds.origin, bounds.extents));
float radius = max_extent(bounds.extents);
const Vector3& mid = bounds.origin;
Vector3 planepts[3];
planepts[0][0] = mins[0];planepts[0][1] = mins[1];planepts[0][2] = mins[2];
planepts[1][0] = maxs[0];planepts[1][1] = mins[1];planepts[1][2] = mins[2];
planepts[2][0] = maxs[0];planepts[2][1] = maxs[1];planepts[2][2] = mins[2];
brush.addPlane(planepts[0], planepts[1], planepts[2], shader, projection);
for (std::size_t i=0 ; i<sides ; ++i)
{
double sv = sin (i*3.14159265*2/sides);
double cv = cos (i*3.14159265*2/sides);
planepts[0][0] = static_cast<float>(floor(mid[0]+radius*cv+0.5));
planepts[0][1] = static_cast<float>(floor(mid[1]+radius*sv+0.5));
planepts[0][2] = mins[2];
planepts[1][0] = mid[0];
planepts[1][1] = mid[1];
planepts[1][2] = maxs[2];
planepts[2][0] = static_cast<float>(floor(planepts[0][0] - radius * sv + 0.5));
planepts[2][1] = static_cast<float>(floor(planepts[0][1] + radius * cv + 0.5));
planepts[2][2] = maxs[2];
brush.addPlane(planepts[0], planepts[1], planepts[2], shader, projection);
}
}
void ListTextItem::onDraw()
{
Brush* brush = Brush::getSingletonPtr();
brush->setFilterMode(mDesc->widget_brushFilterMode);
brush->drawSkinElement(Rect(mTexturePosition,mWidgetDesc->widget_dimensions.size),mSkinElement);
ColourValue prevColor = brush->getColour();
Rect prevClipRegion = brush->getClipRegion();
// Clip to client dimensions
Rect clipRegion(mClientDimensions);
clipRegion.translate(mTexturePosition);
brush->setClipRegion(prevClipRegion.getIntersection(clipRegion));
// Adjust Rect to Text drawing region
clipRegion = mClientDimensions;
clipRegion.translate(mTexturePosition);
mText->draw(clipRegion.position);
brush->setClipRegion(prevClipRegion);
brush->setColor(prevColor);
}
void MapExporter::recalculateBrushWindings()
{
_root->foreachNode([] (const scene::INodePtr& child)->bool
{
Brush* brush = Node_getBrush(child);
if (brush != NULL)
{
brush->evaluateBRep();
}
return true;
});
}
bool Brush::containsBrush(const Brush& brush) const {
if (bounds().contains(brush.bounds()))
return false;
const VertexList& theirVertices = brush.vertices();
VertexList::const_iterator vertexIt, vertexEnd;
for (vertexIt = theirVertices.begin(), vertexEnd = theirVertices.end(); vertexIt != vertexEnd; ++vertexIt) {
const Vertex& vertex = **vertexIt;
if (!containsPoint(vertex.position))
return false;
}
return true;
}
void Scene_BrushConstructPrefab(scene::Graph& graph, EBrushPrefab type, std::size_t sides, const std::string& shader)
{
if(GlobalSelectionSystem().countSelected() != 0)
{
const scene::INodePtr& node = GlobalSelectionSystem().ultimateSelected();
Brush* brush = Node_getBrush(node);
if(brush != 0)
{
AABB bounds = brush->localAABB(); // copy bounds because the brush will be modified
Brush_ConstructPrefab(*brush, type, bounds, sides, shader, TextureTransform_getDefault());
SceneChangeNotify();
}
}
}
void saveBrushToImage(const Brush& brush, Image& image)
{
// save brush as a 16bit grayscale image
#if OGRE_VERSION_MINOR > 4
ushort* data = (ushort*)OGRE_ALLOC_T(uchar, brush.getWidth()*brush.getHeight()*sizeof(ushort), MEMCATEGORY_GENERAL);
#else
ushort* data = (ushort*)new uchar[brush.getWidth()*brush.getHeight()*sizeof(ushort)];
#endif
for (size_t x = 0; x < brush.getWidth(); ++x)
for (size_t y = 0; y < brush.getHeight(); ++y)
data[y*brush.getWidth() + x] = ushort(brush.at(x, y) * 0xffff);
// pass the data to the image, image takes over ownership
image.loadDynamicImage((uchar*)data, brush.getWidth(), brush.getHeight(), 1, PF_L16, true);
}
void Brush::restore(const Brush& brushTemplate, bool checkId) {
if (checkId)
assert(uniqueId() == brushTemplate.uniqueId());
Utility::deleteAll(m_faces);
const FaceList templateFaces = brushTemplate.faces();
for (size_t i = 0; i < templateFaces.size(); i++) {
Face* face = new Face(m_worldBounds, m_forceIntegerFacePoints, *templateFaces[i]);
face->setBrush(this);
m_faces.push_back(face);
}
rebuildGeometry();
}
LRESULT
ContainerWindow::on_message(HWND hWnd, UINT message,
WPARAM wParam, LPARAM lParam)
{
switch (message) {
case WM_CTLCOLORSTATIC:
case WM_CTLCOLORBTN:
{
Window *window = Window::get((HWND)lParam);
if (window == NULL)
break;
Canvas canvas((HDC)wParam, 1, 1);
Brush *brush = on_color(*window, canvas);
if (brush == NULL)
break;
return (LRESULT)brush->native();
}
case WM_DRAWITEM:
/* forward WM_DRAWITEM to the child window who sent this
message */
{
const DRAWITEMSTRUCT *di = (const DRAWITEMSTRUCT *)lParam;
Window *window = Window::get(di->hwndItem);
if (window == NULL)
break;
Canvas canvas(di->hDC, di->rcItem.right - di->rcItem.left,
di->rcItem.bottom - di->rcItem.top);
window->on_paint(canvas);
return TRUE;
}
case WM_COMMAND:
if (wParam == MAKEWPARAM(BaseButtonWindow::COMMAND_BOUNCE_ID, BN_CLICKED)) {
/* forward this message to ButtonWindow::on_clicked() */
BaseButtonWindow *window = (BaseButtonWindow *)Window::get((HWND)lParam);
if (window != NULL && window->on_clicked())
return true;
}
break;
};
return PaintWindow::on_message(hWnd, message, wParam, lParam);
}
