BuildLineInfo* NewBuildTab::DoProcessLine(const wxString& line)
{
BuildLineInfo* buildLineInfo = new BuildLineInfo();
LINE_SEVERITY severity;
// Get the matching regex for this line
CmpPatternPtr cmpPatterPtr = GetMatchingRegex(line, severity);
buildLineInfo->SetSeverity(severity);
BuildLineInfo bli;
if(cmpPatterPtr && cmpPatterPtr->Matches(line, bli)) {
buildLineInfo->SetFilename(bli.GetFilename());
buildLineInfo->SetSeverity(bli.GetSeverity());
buildLineInfo->SetLineNumber(bli.GetLineNumber());
buildLineInfo->NormalizeFilename(m_directories, m_cygwinRoot);
buildLineInfo->SetRegexLineMatch(bli.GetRegexLineMatch());
buildLineInfo->SetColumn(bli.GetColumn());
if(severity == SV_WARNING) {
// Warning
m_errorsAndWarningsList.push_back(buildLineInfo);
m_warnCount++;
} else {
// Error
m_errorsAndWarningsList.push_back(buildLineInfo);
m_errorsList.push_back(buildLineInfo);
m_errorCount++;
}
}
return buildLineInfo;
}
void NewBuildTab::OnStyleNeeded(wxStyledTextEvent& event)
{
int startPos = m_view->GetEndStyled();
int endPos = event.GetPosition();
wxString text = m_view->GetTextRange(startPos, endPos);
#if wxCHECK_VERSION(3, 1, 1) && !defined(__WXOSX__)
// The scintilla syntax in e.g. wx3.1.1 changed
m_view->StartStyling(startPos);
#else
m_view->StartStyling(startPos, 0x1f);
#endif
int curline = m_view->GetLineCount();
curline -= 1; // The view always ends with a "\n", we don't count it as a line
wxArrayString lines = ::wxStringTokenize(text, wxT("\n"), wxTOKEN_RET_DELIMS);
// the last line that we coloured
curline -= lines.size();
for(size_t i = 0; i < lines.size(); ++i) {
const wxString& strLine = lines.Item(i);
if(m_viewData.count(curline)) {
BuildLineInfo* b = m_viewData.find(curline)->second;
switch(b->GetSeverity()) {
case SV_WARNING:
m_view->SetStyling(strLine.length(), LEX_GCC_WARNING);
break;
case SV_ERROR:
m_view->SetStyling(strLine.length(), LEX_GCC_ERROR);
break;
case SV_SUCCESS:
m_view->SetStyling(strLine.length(), LEX_GCC_DEFAULT);
break;
case SV_DIR_CHANGE:
m_view->SetStyling(strLine.length(), LEX_GCC_INFO);
break;
case SV_NONE:
default:
m_view->SetStyling(strLine.length(), LEX_GCC_DEFAULT);
break;
}
} else {
m_view->SetStyling(strLine.length(), LEX_GCC_DEFAULT);
}
++curline;
}
}
void NewBuildTab::DoProcessOutput(bool compilationEnded, bool isSummaryLine)
{
if ( !compilationEnded && m_output.Find(wxT("\n")) == wxNOT_FOUND ) {
// still dont have a complete line
return;
}
wxArrayString lines = ::wxStringTokenize(m_output, wxT("\n"), wxTOKEN_RET_DELIMS);
m_output.Clear();
// Process only completed lines (i.e. a line that ends with '\n')
for(size_t i=0; i<lines.GetCount(); i++) {
if( !compilationEnded && !lines.Item(i).EndsWith(wxT("\n")) ) {
m_output << lines.Item(i);
return;
}
wxString buildLine = lines.Item(i);//.Trim().Trim(false);
// If this is a line similar to 'Entering directory `'
// add the path in the directories array
DoSearchForDirectory(buildLine);
BuildLineInfo *buildLineInfo = DoProcessLine(buildLine, isSummaryLine);
//keep the line info
if(buildLineInfo->GetFilename().IsEmpty() == false) {
m_buildInfoPerFile.insert(std::make_pair(buildLineInfo->GetFilename(), buildLineInfo));
}
// Append the line content
if( buildLineInfo->GetSeverity() == SV_ERROR ) {
if ( !isSummaryLine ) {
buildLine.Prepend(ERROR_MARKER);
}
} else if( buildLineInfo->GetSeverity() == SV_WARNING ) {
if ( !isSummaryLine ) {
buildLine.Prepend(WARNING_MARKER);
}
}
if ( isSummaryLine ) {
// Add a marker for drawing the bitmap
if ( m_errorCount ) {
buildLine.Prepend(SUMMARY_MARKER_ERROR);
} else if ( m_warnCount ) {
buildLine.Prepend(SUMMARY_MARKER_WARNING);
} else {
buildLine.Prepend(SUMMARY_MARKER_SUCCESS);
}
buildLine.Prepend(SUMMARY_MARKER);
}
wxVector<wxVariant> data;
data.push_back( wxVariant(buildLine) );
// Keep the line number in the build tab
buildLineInfo->SetLineInBuildTab( m_listctrl->GetItemCount() );
m_listctrl->AppendItem(data, (wxUIntPtr)buildLineInfo);
if ( clConfig::Get().Read("build-auto-scroll", true) ) {
unsigned int count = m_listctrl->GetStore()->GetItemCount();
wxDataViewItem lastItem = m_listctrl->GetStore()->GetItem(count-1);
m_listctrl->EnsureVisible( lastItem );
}
}
}
void NewBuildTab::MarkEditor(LEditor* editor)
{
if ( !editor )
return;
editor->DelAllCompilerMarkers();
editor->AnnotationClearAll();
editor->AnnotationSetVisible(2); // Visible with box around it
BuildTabSettingsData options;
EditorConfigST::Get()->ReadObject(wxT("build_tab_settings"), &options);
// Are markers or annotations enabled?
if( options.GetErrorWarningStyle() == BuildTabSettingsData::EWS_NoMarkers ) {
return;
}
std::pair<MultimapBuildInfo_t::iterator, MultimapBuildInfo_t::iterator> iter = m_buildInfoPerFile.equal_range(editor->GetFileName().GetFullPath());
if ( iter.first == iter.second ) {
// could not find any, try the fullname
iter = m_buildInfoPerFile.equal_range(editor->GetFileName().GetFullName());
#if defined(__WXGTK__)
if ( iter.first == iter.second ) {
// Nope. Perhaps it's a symlink
iter = m_buildInfoPerFile.equal_range(CLRealPath(editor->GetFileName().GetFullPath()));
}
#endif
}
editor->InitializeAnnotations();
// Merge all the errors from the same line into a single error
AnnotationInfoByLineMap_t annotations;
for(; iter.first != iter.second; ++iter.first) {
BuildLineInfo *bli = iter.first->second;
wxString text = m_listctrl->GetTextValue(bli->GetLineInBuildTab(), 0).Trim().Trim(false);
// strip any build markers
StripBuildMarkders(text);
// remove the line part from the text
text = text.Mid(bli->GetRegexLineMatch());
// if the line starts with ':' remove it as well
text.StartsWith(":", &text);
text.Trim().Trim(false);
if ( !text.IsEmpty() ) {
if( bli && (bli->GetSeverity() == SV_ERROR || bli->GetSeverity() == SV_WARNING) ) {
if( annotations.count(bli->GetLineNumber()) ) {
// we already have an error on this line, concatenate the message
AnnotationInfo &info = annotations[bli->GetLineNumber()];
info.text << "\n" << text;
if ( bli->GetSeverity() == SV_ERROR ) {
// override the severity to ERROR
info.severity = SV_ERROR;
}
} else {
// insert new one
AnnotationInfo info;
info.line = bli->GetLineNumber();
info.severity = bli->GetSeverity();
info.text = text;
annotations.insert( std::make_pair(bli->GetLineNumber(), info) );
}
}
}
}
AnnotationInfoByLineMap_t::iterator annIter = annotations.begin();
for(; annIter != annotations.end(); ++annIter) {
if ( annIter->second.severity == SV_ERROR ) {
editor->SetErrorMarker(annIter->first, annIter->second.text);
} else {
editor->SetWarningMarker(annIter->first, annIter->second.text);
}
}
// now place the errors
editor->Refresh();
}
BuildLineInfo* NewBuildTab::DoProcessLine(const wxString& line, bool isSummaryLine)
{
BuildLineInfo *buildLineInfo = new BuildLineInfo();
if ( isSummaryLine ) {
// Set the severity
if( m_errorCount == 0 && m_warnCount == 0 ) {
buildLineInfo->SetSeverity(SV_SUCCESS);
} else if ( m_errorCount ) {
buildLineInfo->SetSeverity(SV_ERROR);
} else {
buildLineInfo->SetSeverity(SV_WARNING);
}
} else {
DoUpdateCurrentCompiler(line); // Usering the current line, update the active compiler based on the current project being compiled
// Find *warnings* first
bool isWarning = false;
CmpPatterns cmpPatterns;
if(!DoGetCompilerPatterns(m_cmp->GetName(), cmpPatterns)) {
return buildLineInfo;
}
// If it is not an error, maybe it's a warning
for(size_t i=0; i<cmpPatterns.warningPatterns.size(); i++) {
CmpPatternPtr cmpPatterPtr = cmpPatterns.warningPatterns.at(i);
BuildLineInfo bli;
if ( cmpPatterPtr->Matches(line, bli) ) {
buildLineInfo->SetFilename(bli.GetFilename());
buildLineInfo->SetSeverity(bli.GetSeverity());
buildLineInfo->SetLineNumber(bli.GetLineNumber());
buildLineInfo->NormalizeFilename(m_directories, m_cygwinRoot);
buildLineInfo->SetRegexLineMatch(bli.GetRegexLineMatch());
// keep this info in the errors+warnings list only
m_errorsAndWarningsList.push_back(buildLineInfo);
m_warnCount++;
isWarning = true;
break;
}
}
if ( !isWarning ) {
for(size_t i=0; i<cmpPatterns.errorsPatterns.size(); i++) {
BuildLineInfo bli;
CmpPatternPtr cmpPatterPtr = cmpPatterns.errorsPatterns.at(i);
if ( cmpPatterPtr->Matches(line, bli) ) {
buildLineInfo->SetFilename(bli.GetFilename());
buildLineInfo->SetSeverity(bli.GetSeverity());
buildLineInfo->SetLineNumber(bli.GetLineNumber());
buildLineInfo->NormalizeFilename(m_directories, m_cygwinRoot);
buildLineInfo->SetRegexLineMatch(bli.GetRegexLineMatch());
// keep this info in both lists (errors+warnings AND errors)
m_errorsAndWarningsList.push_back(buildLineInfo);
m_errorsList.push_back(buildLineInfo);
m_errorCount++;
break;
}
}
}
}
return buildLineInfo;
}