// ---------------------------------------------------------
// CPosTp4723::SetupProxyPSYsL
//
// (other items were commented in a header).
// ---------------------------------------------------------
//
void CT_LbsClientPosTp4723::SetupProxyPSYsL()
{
CPosModules* db = CPosModules::OpenL();
CleanupStack::PushL(db);
CPosModuleUpdate* moduleUpdate = CPosModuleUpdate::NewLC();
moduleUpdate->SetUpdateAvailability(EFalse);
CPosModuleIdList* prioList = db->ModuleIdListLC();
// Disable all PSY:s except PSYs used by this test case
for (TInt i = 0 ; i < prioList->Count(); i++)
{
if ((*prioList)[i] != iUidMultiPsy &&
(*prioList)[i] != iUidSatInfoPsy)
{
db->UpdateModuleL((*prioList)[i], *moduleUpdate);
}
}
moduleUpdate->SetUpdateAvailability(ETrue);
db->UpdateModuleL(iUidMultiPsy, *moduleUpdate);
db->UpdateModuleL(iUidSatInfoPsy, *moduleUpdate);
db->SetModulePriorityL(iUidMultiPsy, 0);
db->SetModulePriorityL(iUidSatInfoPsy, 1);
CleanupStack::PopAndDestroy(prioList);
CleanupStack::PopAndDestroy(moduleUpdate);
CleanupStack::PopAndDestroy(db);
}
void CTe_locsrvSuiteStepBase::SetupPsyPriorityL(TUid aPsyUid, TInt aPriority)
{
CPosModules* modules = CPosModules::OpenL();
CleanupStack::PushL(modules);
CPosModuleUpdate* moduleUpdate = CPosModuleUpdate::NewLC();
// enable module
moduleUpdate->SetUpdateAvailability(ETrue);
modules->UpdateModuleL(aPsyUid, *moduleUpdate);
// set module priority
modules->SetModulePriorityL(aPsyUid, aPriority);
CleanupStack::PopAndDestroy(2, modules); // moduleUpdate, modules
User::After(KSecond);
}
// ---------------------------------------------------------
// CT_LbsClientPosTp76::StartL
//
// (other items were commented in a header).
// ---------------------------------------------------------
//
void CT_LbsClientPosTp76::StartL()
{
// Open connection to Epos
RPositionServer posServer;
CleanupClosePushL(posServer);
TInt err = posServer.Connect();
_LIT(KConnectError, "TP76. Unable to open connection to Epos, return code %d");
AssertTrueSecL(err == KErrNone, KConnectError, err);
// Set priority for those psys that will be used in this tp.
// The order will be testpsy1(externalgps),testpsy2,testpsy3
TUid uidPsy1 = iUidTestPsy1;
TUid uidPsy2 = iUidTestPsy2;
TUid uidPsy3 = iUidTestPsy3;
SetupPsyL(uidPsy1); // will disable all except uidPsy1
CPosModules* db = CPosModules::OpenL();
CleanupStack::PushL(db);
// Enable the PSY test psys
CPosModuleUpdate* moduleUpdate = CPosModuleUpdate::NewLC();
moduleUpdate -> SetUpdateAvailability(ETrue);
db->SetModulePriorityL(uidPsy1, 0);
db->SetModulePriorityL(uidPsy2, 1);
db->SetModulePriorityL(uidPsy3, 1);
db->UpdateModuleL(uidPsy1, *moduleUpdate);
db->UpdateModuleL(uidPsy2, *moduleUpdate);
db->UpdateModuleL(uidPsy3, *moduleUpdate);
CleanupStack::PopAndDestroy(moduleUpdate);
// Setup the PSY:s in the correct order
CPosModuleIdList* prioList = db->ModuleIdListLC();
TInt numModules = prioList->Count();
TPositionModuleInfo modInfoPsy2; //used to comapre that the same result is returned.
db -> GetModuleInfoL(uidPsy2, modInfoPsy2);
CleanupStack::PopAndDestroy(2); // db, prioList
// Get default positioning module info. (testpsy1 or externalgps)
TPositionModuleInfo modInfo;
TPositionModuleId defaultId;
err = posServer.GetDefaultModuleId(defaultId);
_LIT(KDefaultModuleId, "Not possible to get default module id");
AssertTrueSecL(err == KErrNone, KDefaultModuleId, err);
// Check that the correct id was returned.
if (defaultId != uidPsy1)
{
_LIT(KErrorWrongModule, "Default module was not returned in GetDefaultModuleId()");
LogErrorAndLeaveL(KErrorWrongModule);
}
// Get default module info by using the id returned.
err = posServer.GetModuleInfoById(defaultId, modInfo);
_LIT(KGetDefPosModInfoError,
"TP76. Error occured at GetModuleInfoById, return code %d");
AssertTrueSecL(err == KErrNone, KGetDefPosModInfoError, err);
// Check if the received psy is the right one
_LIT(KIncorrectPsyError,
"TP76. Incorrect PSY returned from Epos.");
AssertTrueL(uidPsy1 == modInfo.ModuleId(), KIncorrectPsyError);
//END TEST DEFAULT//
//
// TestGetModuleInfoById //
//
// Get info from specific psy (testpsy2)
_LIT(KGetPosModInfoError, "Wrong data received from Epos");
err = posServer.GetModuleInfoById(uidPsy2, modInfo);
AssertTrueSecL(err == 0, KGetPosModInfoError, err);
AssertTrueL(modInfo.ModuleId() == uidPsy2, KGetPosModInfoError);
CheckModuleInfoL(modInfoPsy2, modInfo);
//END TEST GetModuleInfoById//
//
// Test GetModuleInfoByIndex //
//
// Get info from the testpsys (testpsy1, testpsy2, testpsy3)
TPositionModuleId id1;
TPositionModuleId id2;
TPositionModuleId id3;
TUint count;
err = posServer.GetNumModules(count);
_LIT(KNumPosModInfoError,
"TP76. Error occured at GetNumModules error code returned, return code %d");
AssertTrueSecL(err == 0,KNumPosModInfoError,err);
_LIT(KIncorrectNoOfModules,
"TP76. Incorrect number of modules.");
TUint no = (TUint) numModules; //Bad API implementation
AssertTrueL(count == no, KIncorrectNoOfModules);
err = posServer.GetModuleInfoByIndex(0, modInfo);
AssertTrueSecL(err == KErrNone, KGetDefPosModInfoError, err);
id1 = modInfo.ModuleId();
if (!(id1 == uidPsy1 ||
id1 == uidPsy2 ||
id1 == uidPsy3))
{
LogErrorAndLeaveL(KGetPosModInfoError);
}
err = posServer.GetModuleInfoByIndex(1, modInfo);
AssertTrueSecL(err == 0, KGetDefPosModInfoError, err);
id2 = modInfo.ModuleId();
if (!(id2 == uidPsy1 ||
id2 == uidPsy2 ||
id2 == uidPsy3))
{
LogErrorAndLeaveL(KGetPosModInfoError);
}
err = posServer.GetModuleInfoByIndex(2, modInfo);
AssertTrueSecL(err == 0, KGetDefPosModInfoError, err);
id3 = modInfo.ModuleId();
if (!(id3 == uidPsy1 ||
id3 == uidPsy2 ||
id3 == uidPsy3))
{
LogErrorAndLeaveL(KGetPosModInfoError);
}
// Assuming that only 3 PSYs are installed
err = posServer.GetModuleInfoByIndex(3, modInfo);
AssertTrueSecL(err == 0, KGetDefPosModInfoError, err);
// END TEST GetModuleInfoByIndex //
CleanupStack::PopAndDestroy(); //posServer
}
// ---------------------------------------------------------
// CT_LbsClientPosTp1::StartL
//
// (other items were commented in a header).
// ---------------------------------------------------------
//
void CT_LbsClientPosTp1::StartL()
{
ConnectL();
CPosModules* db = CPosModules::OpenL();
CleanupStack::PushL(db);
SetupPsyL(iUidMultiPsy);
_LIT(KSetupPSY, "TP1: Has Setup Multi PSY");
INFO_PRINTF1(KSetupPSY);
//setting priority
TPositionModuleInfo moduleInfoHp;//Hp - high prio;
TPositionModuleInfo moduleInfoLp;//Lp - low prio;
CPosModuleIdList* prioList = db->ModuleIdListLC();
db->GetModuleInfoL(prioList->At(0), moduleInfoHp);
CPosModuleUpdate* moduleUpdate = CPosModuleUpdate::NewLC();
moduleUpdate->SetUpdateAvailability(ETrue);
if (iUidMultiPsy.iUid == moduleInfoHp.ModuleId().iUid)
{
// Case when Multi PSY has highest prio:
// Ensuring it is enabled
_LIT(KMultiHighest, "TP1: Case when Multi PSY has highest prio");
INFO_PRINTF1(KMultiHighest);
db->UpdateModuleL((*prioList)[0], *moduleUpdate);
}
else
{
// Case when Multi PSY has not highest prio:
//
_LIT(KMultiNotHighest, "TP1: Case when Multi PSY has NOT highest prio");
INFO_PRINTF1(KMultiNotHighest);
db->GetModuleInfoL(iUidMultiPsy, moduleInfoLp);
// Ensuring it is enabled
db->UpdateModuleL(iUidMultiPsy, *moduleUpdate);
TUint hp = db->PriorityL(moduleInfoHp.ModuleId());
TUint lp = db->PriorityL(moduleInfoLp.ModuleId());
// Changing prio of highest prio PSY and Multi PSY.
// Setting Multi PSY to highest prio
db->SetModulePriorityL(iUidMultiPsy, hp);
db->SetModulePriorityL((*prioList)[0], lp);
}
_LIT(KTestPSY1On, "TP1: Enabling Test PSY 1");
INFO_PRINTF1(KTestPSY1On);
db -> UpdateModuleL(iUidTestPsy1, *moduleUpdate);
_LIT(KTestPSY2On, "TP1: Enabling Test PSY 2");
INFO_PRINTF1(KTestPSY2On);
db -> UpdateModuleL(iUidTestPsy2, *moduleUpdate);
CleanupStack::PopAndDestroy(moduleUpdate);
CleanupStack::PopAndDestroy(2, db); // db, prioList
User::LeaveIfError(OpenPositioner());
// Request data from default psy should be Multi psy
_LIT(KService, "service");
TPositionInfo posInfo = TPositionInfo();
TInt err = PerformSyncRequest(KService, &posInfo);
if (err != KErrNone)
{
_LIT(KErrorRequest, "The request was not completed with KErrNone");
LogErrorAndLeaveL(KErrorRequest, err);
}
if (iUidMultiPsy.iUid != posInfo.ModuleId().iUid)
{
_LIT(KIncorrectPsyError, "TP1. Position from wrong PSY received");
LogErrorAndLeaveL(KIncorrectPsyError);
}
HPositionGenericInfo* genericInfo = HPositionGenericInfo::NewLC();
err = PerformSyncRequest(KService, &(*genericInfo));
if (err != KErrNone)
{
_LIT(KErrorRequest, "The request was not completed with KErrNone");
LogErrorAndLeaveL(KErrorRequest);
}
if (iUidMultiPsy.iUid != (genericInfo -> ModuleId()).iUid)
{
_LIT(KIncorrectPsyError,
"TP1. Position from wrong PSY received");
LogErrorAndLeaveL(KIncorrectPsyError);
}
TPositionCourseInfo courseInfo = TPositionCourseInfo();
err = PerformSyncRequest(KService, &courseInfo);
if (err != KErrNone)
{
_LIT(KErrorRequest, "Course info supported by default, but request failed");
LogErrorAndLeaveL(KErrorRequest);
}
TPositionSatelliteInfo satelliteInfo = TPositionSatelliteInfo();
err = PerformSyncRequest(KService, &satelliteInfo);
if (err != KErrNone)
{
_LIT(KErrorRequest, "Satellite info supported by default, but request failed");
LogErrorAndLeaveL(KErrorRequest);
}
//Changing the priority and verifiy that it still possilbe
//to request updated from a psy if basic position information
//is used and that it is not possilbe to request sat or cource
//any more.
SetupPsyL(iUidTestPsy2);
User::After(3000000);
// Request data from default psy should be test psy 2 now
err = PerformSyncRequest(KService, &posInfo);
if (err != KErrNone)
{
_LIT(KErrorRequest, "The request was not completed with KErrNone");
LogErrorAndLeaveL(KErrorRequest);
}
if (iUidTestPsy2.iUid != posInfo.ModuleId().iUid)
{
_LIT(KIncorrectPsyError,
"TP1. Position from wrong PSY received");
LogErrorAndLeaveL(KIncorrectPsyError);
}
err = PerformSyncRequest(KService, &(*genericInfo));
if (err != KErrNone)
{
_LIT(KErrorRequest, "The request was not completed with KErrNone");
LogErrorAndLeaveL(KErrorRequest);
}
if (iUidTestPsy2.iUid != (genericInfo -> ModuleId()).iUid)
{
_LIT(KIncorrectPsyError,
"TP1. Position from wrong PSY received");
LogErrorAndLeaveL(KIncorrectPsyError);
}
err = PerformSyncRequest(KService, &courseInfo);
if (err != KErrArgument)
{
_LIT(KErrorRequest, "Course info not supported by default, KErrArgument not returned");
LogErrorAndLeaveL(KErrorRequest);
}
err = PerformSyncRequest(KService, &satelliteInfo);
if (err != KErrArgument)
{
_LIT(KErrorRequest, "Satellite info not supported by default, KErrArgument not returned");
LogErrorAndLeaveL(KErrorRequest);
}
//check that it is possilbe to change the different
//type of class info during periodic request and
//that the periodic update will fail if the class
//type is incorrect.
TTimeIntervalMicroSeconds interval = TTimeIntervalMicroSeconds(1000000);
TPositionUpdateOptions posOption;
posOption.SetUpdateInterval(interval);
_LIT(KUpdateErr, "Error when setting update interval, %d");
err = iPositioner.SetUpdateOptions(posOption);
AssertTrueL(err == KErrNone, KUpdateErr, err);
_LIT(KErrPeriodic, "The periodic request did not return KErrNone, %d");
err = PerformSyncRequest(KService, &posInfo);
AssertTrueL(err == KErrNone , KErrPeriodic, err);
_LIT(KErrPeriodicArr, "The periodic request did not return KErrArgument, %d");
err = PerformSyncRequest(KService, &satelliteInfo);
AssertTrueL(err == KErrArgument , KErrPeriodicArr, err);
SetupPsyL(iUidMultiPsy);
User::After(3000000);
err = PerformSyncRequest(KService, &satelliteInfo);
AssertTrueL(err == KErrNone , KErrPeriodic, err);
CleanupStack::PopAndDestroy(genericInfo);
ClosePositioner();
Disconnect();
}