void UIMachineSettingsSystem::prepareTabMotherboard()
{
/* Load configuration: */
CSystemProperties properties = vboxGlobal().virtualBox().GetSystemProperties();
/* Preconfigure memory-size editor: */
m_pEditorMemorySize->setMinimum(m_pSliderMemorySize->minRAM());
m_pEditorMemorySize->setMaximum(m_pSliderMemorySize->maxRAM());
vboxGlobal().setMinimumWidthAccordingSymbolCount(m_pEditorMemorySize, 5);
/* Preconfigure boot-table widgets: */
mTbBootItemUp->setIcon(UIIconPool::iconSet(":/list_moveup_16px.png", ":/list_moveup_disabled_16px.png"));
mTbBootItemDown->setIcon(UIIconPool::iconSet(":/list_movedown_16px.png", ":/list_movedown_disabled_16px.png"));
#ifdef Q_WS_MAC
/* We need a little space for the focus rect: */
m_pLayoutBootOrder->setContentsMargins(3, 3, 3, 3);
m_pLayoutBootOrder->setSpacing(3);
#endif /* Q_WS_MAC */
/* Install global event filter
* to handle boot-table focus in/out events: */
// TODO: Get rid of that *crap*!
qApp->installEventFilter(this);
/* Populate possible boot items list.
* Currently, it seems, we are supporting only 4 possible boot device types:
* 1. Floppy, 2. DVD-ROM, 3. Hard Disk, 4. Network.
* But maximum boot devices count supported by machine
* should be retrieved through the ISystemProperties getter.
* Moreover, possible boot device types are not listed in some separate Main vector,
* so we should get them (randomely?) from the list of all device types.
* Until there will be separate Main getter for list of supported boot device types,
* this list will be hard-coded here... */
int iPossibleBootListSize = qMin((ULONG)4, properties.GetMaxBootPosition());
for (int iBootPosition = 1; iBootPosition <= iPossibleBootListSize; ++iBootPosition)
{
switch (iBootPosition)
{
case 1: m_possibleBootItems << KDeviceType_Floppy; break;
case 2: m_possibleBootItems << KDeviceType_DVD; break;
case 3: m_possibleBootItems << KDeviceType_HardDisk; break;
case 4: m_possibleBootItems << KDeviceType_Network; break;
default: break;
}
}
/* Add all available devices types, so we could initially calculate the right size: */
for (int i = 0; i < m_possibleBootItems.size(); ++i)
{
QListWidgetItem *pItem = new UIBootTableItem(m_possibleBootItems[i]);
mTwBootOrder->addItem(pItem);
}
/* Populate 'chipset type' combo: */
m_pComboChipsetType->addItem(gpConverter->toString(KChipsetType_PIIX3), QVariant(KChipsetType_PIIX3));
m_pComboChipsetType->addItem(gpConverter->toString(KChipsetType_ICH9), QVariant(KChipsetType_ICH9));
/* Preconfigure 'pointing HID type' combo: */
m_pComboPointingHIDType->setSizeAdjustPolicy(QComboBox::AdjustToContents);
/* Install memory-size widget connections: */
connect(m_pSliderMemorySize, SIGNAL(valueChanged(int)), this, SLOT(sltHandleMemorySizeSliderChange()));
connect(m_pEditorMemorySize, SIGNAL(valueChanged(int)), this, SLOT(sltHandleMemorySizeEditorChange()));
/* Install boot-table connections: */
connect(mTbBootItemUp, SIGNAL(clicked()), mTwBootOrder, SLOT(sltMoveItemUp()));
connect(mTbBootItemDown, SIGNAL(clicked()), mTwBootOrder, SLOT(sltMoveItemDown()));
connect(mTwBootOrder, SIGNAL(sigRowChanged(int)), this, SLOT(sltCurrentBootItemChanged(int)));
}
UIMachineSettingsSystem::UIMachineSettingsSystem()
: mValidator(0)
, mMinGuestCPU(0), mMaxGuestCPU(0)
, mMinGuestCPUExecCap(0), mMedGuestCPUExecCap(0), mMaxGuestCPUExecCap(0)
, m_fOHCIEnabled(false)
{
/* Apply UI decorations */
Ui::UIMachineSettingsSystem::setupUi (this);
/* Setup constants */
CSystemProperties properties = vboxGlobal().virtualBox().GetSystemProperties();
uint hostCPUs = vboxGlobal().host().GetProcessorCount();
mMinGuestCPU = properties.GetMinGuestCPUCount();
mMaxGuestCPU = RT_MIN (2 * hostCPUs, properties.GetMaxGuestCPUCount());
mMinGuestCPUExecCap = 1;
mMedGuestCPUExecCap = 40;
mMaxGuestCPUExecCap = 100;
/* Populate possible boot items list.
* Currently, it seems, we are supporting only 4 possible boot device types:
* 1. Floppy, 2. DVD-ROM, 3. Hard Disk, 4. Network.
* But maximum boot devices count supported by machine
* should be retrieved through the ISystemProperties getter.
* Moreover, possible boot device types are not listed in some separate Main vector,
* so we should get them (randomely?) from the list of all device types.
* Until there will be separate Main getter for list of supported boot device types,
* this list will be hard-coded here... */
int iPossibleBootListSize = qMin((ULONG)4, properties.GetMaxBootPosition());
for (int iBootPosition = 1; iBootPosition <= iPossibleBootListSize; ++iBootPosition)
{
switch (iBootPosition)
{
case 1:
m_possibleBootItems << KDeviceType_Floppy;
break;
case 2:
m_possibleBootItems << KDeviceType_DVD;
break;
case 3:
m_possibleBootItems << KDeviceType_HardDisk;
break;
case 4:
m_possibleBootItems << KDeviceType_Network;
break;
default:
break;
}
}
/* Add all available devices types, so we could initially calculate the
* right size. */
for (int i = 0; i < m_possibleBootItems.size(); ++i)
{
QListWidgetItem *pItem = new UIBootTableItem(m_possibleBootItems[i]);
mTwBootOrder->addItem(pItem);
}
/* Setup validators */
mLeMemory->setValidator (new QIntValidator (mSlMemory->minRAM(), mSlMemory->maxRAM(), this));
mLeCPU->setValidator (new QIntValidator (mMinGuestCPU, mMaxGuestCPU, this));
mLeCPUExecCap->setValidator(new QIntValidator(mMinGuestCPUExecCap, mMaxGuestCPUExecCap, this));
/* Setup connections */
connect (mSlMemory, SIGNAL (valueChanged (int)),
this, SLOT (valueChangedRAM (int)));
connect (mLeMemory, SIGNAL (textChanged (const QString&)),
this, SLOT (textChangedRAM (const QString&)));
connect (mTbBootItemUp, SIGNAL (clicked()),
mTwBootOrder, SLOT(sltMoveItemUp()));
connect (mTbBootItemDown, SIGNAL (clicked()),
mTwBootOrder, SLOT(sltMoveItemDown()));
connect (mTwBootOrder, SIGNAL (sigRowChanged(int)),
this, SLOT (onCurrentBootItemChanged (int)));
connect (mSlCPU, SIGNAL (valueChanged (int)),
this, SLOT (valueChangedCPU (int)));
connect (mLeCPU, SIGNAL (textChanged (const QString&)),
this, SLOT (textChangedCPU (const QString&)));
connect(mSlCPUExecCap, SIGNAL(valueChanged(int)), this, SLOT(sltValueChangedCPUExecCap(int)));
connect(mLeCPUExecCap, SIGNAL(textChanged(const QString&)), this, SLOT(sltTextChangedCPUExecCap(const QString&)));
/* Setup iconsets */
mTbBootItemUp->setIcon(UIIconPool::iconSet(":/list_moveup_16px.png",
":/list_moveup_disabled_16px.png"));
mTbBootItemDown->setIcon(UIIconPool::iconSet(":/list_movedown_16px.png",
":/list_movedown_disabled_16px.png"));
#ifdef Q_WS_MAC
/* We need a little space for the focus rect. */
mLtBootOrder->setContentsMargins (3, 3, 3, 3);
mLtBootOrder->setSpacing (3);
#endif /* Q_WS_MAC */
/* Limit min/max. size of QLineEdit */
mLeMemory->setFixedWidthByText (QString().fill ('8', 5));
/* Ensure mLeMemory value and validation is updated */
valueChangedRAM (mSlMemory->value());
/* Setup cpu slider */
mSlCPU->setPageStep (1);
mSlCPU->setSingleStep (1);
mSlCPU->setTickInterval (1);
/* Setup the scale so that ticks are at page step boundaries */
mSlCPU->setMinimum (mMinGuestCPU);
mSlCPU->setMaximum (mMaxGuestCPU);
mSlCPU->setOptimalHint (1, hostCPUs);
mSlCPU->setWarningHint (hostCPUs, mMaxGuestCPU);
/* Limit min/max. size of QLineEdit */
mLeCPU->setFixedWidthByText(QString().fill('8', 4));
/* Ensure mLeMemory value and validation is updated */
valueChangedCPU (mSlCPU->value());
/* Setup cpu cap slider: */
mSlCPUExecCap->setPageStep(10);
mSlCPUExecCap->setSingleStep(1);
mSlCPUExecCap->setTickInterval(10);
/* Setup the scale so that ticks are at page step boundaries: */
mSlCPUExecCap->setMinimum(mMinGuestCPUExecCap);
mSlCPUExecCap->setMaximum(mMaxGuestCPUExecCap);
mSlCPUExecCap->setWarningHint(mMinGuestCPUExecCap, mMedGuestCPUExecCap);
mSlCPUExecCap->setOptimalHint(mMedGuestCPUExecCap, mMaxGuestCPUExecCap);
/* Limit min/max. size of QLineEdit: */
mLeCPUExecCap->setFixedWidthByText(QString().fill('8', 4));
/* Ensure mLeMemory value and validation is updated: */
sltValueChangedCPUExecCap(mSlCPUExecCap->value());
/* Populate chipset combo: */
mCbChipset->insertItem(0, gpConverter->toString(KChipsetType_PIIX3), QVariant(KChipsetType_PIIX3));
mCbChipset->insertItem(1, gpConverter->toString(KChipsetType_ICH9), QVariant(KChipsetType_ICH9));
/* Install global event filter */
qApp->installEventFilter (this);
/* Applying language settings */
retranslateUi();
}