/// Update the callsite to pass in the correct arguments.
static void rewriteApplyInst(const CallSiteDescriptor &CSDesc,
SILFunction *NewF) {
FullApplySite AI = CSDesc.getApplyInst();
SingleValueInstruction *Closure = CSDesc.getClosure();
SILBuilderWithScope Builder(Closure);
FunctionRefInst *FRI = Builder.createFunctionRef(AI.getLoc(), NewF);
// Create the args for the new apply by removing the closure argument...
llvm::SmallVector<SILValue, 8> NewArgs;
unsigned Index = 0;
for (auto Arg : AI.getArguments()) {
if (Index != CSDesc.getClosureIndex())
NewArgs.push_back(Arg);
Index++;
}
// ... and appending the captured arguments. We also insert retains here at
// the location of the original closure. This is needed to balance the
// implicit release of all captured arguments that occurs when the partial
// apply is destroyed.
SILModule &M = NewF->getModule();
auto ClosureCalleeConv = CSDesc.getClosureCallee()->getConventions();
unsigned ClosureArgIdx =
ClosureCalleeConv.getNumSILArguments() - CSDesc.getNumArguments();
for (auto Arg : CSDesc.getArguments()) {
SILType ArgTy = Arg->getType();
// If our argument is of trivial type, continue...
if (ArgTy.isTrivial(M)) {
NewArgs.push_back(Arg);
++ClosureArgIdx;
continue;
}
auto ArgConvention =
ClosureCalleeConv.getSILArgumentConvention(ClosureArgIdx);
// Non-inout indirect arguments are not supported yet.
assert(ArgTy.isObject() ||
!isNonInoutIndirectSILArgument(Arg, ArgConvention));
// If argument is not an object and it is an inout parameter,
// continue...
if (!ArgTy.isObject() &&
!isNonInoutIndirectSILArgument(Arg, ArgConvention)) {
NewArgs.push_back(Arg);
++ClosureArgIdx;
continue;
}
// TODO: When we support address types, this code path will need to be
// updated.
// We need to balance the consumed argument of the new partial_apply in the
// specialized callee by a retain. If both the original partial_apply and
// the apply of the callee are in the same basic block we can assume they
// are executed the same number of times. Therefore it is sufficient to just
// retain the argument at the site of the original partial_apply.
//
// %closure = partial_apply (%arg)
// = apply %callee(%closure)
// =>
// retain %arg
// %closure = partial_apply (%arg)
// apply %specialized_callee(..., %arg)
//
// However, if they are not in the same basic block the callee might be
// executed more frequently than the closure (for example, if the closure is
// created in a loop preheader and the callee taking the closure is executed
// in the loop). In such a case we must keep the argument live across the
// call site of the callee and emit a matching retain for every invocation
// of the callee.
//
// %closure = partial_apply (%arg)
//
// while () {
// = %callee(%closure)
// }
// =>
// retain %arg
// %closure = partial_apply (%arg)
//
// while () {
// retain %arg
// apply %specialized_callee(.., %arg)
// }
// release %arg
//
if (AI.getParent() != Closure->getParent()) {
// Emit the retain and release that keeps the argument life across the
// callee using the closure.
CSDesc.extendArgumentLifetime(Arg, ArgConvention);
// Emit the retain that matches the captured argument by the
// partial_apply
// in the callee that is consumed by the partial_apply.
Builder.setInsertionPoint(AI.getInstruction());
Builder.createRetainValue(Closure->getLoc(), Arg,
Builder.getDefaultAtomicity());
} else {
Builder.createRetainValue(Closure->getLoc(), Arg,
Builder.getDefaultAtomicity());
}
NewArgs.push_back(Arg);
++ClosureArgIdx;
}
Builder.setInsertionPoint(AI.getInstruction());
FullApplySite NewAI;
switch (AI.getKind()) {
case FullApplySiteKind::TryApplyInst: {
auto *TAI = cast<TryApplyInst>(AI);
NewAI = Builder.createTryApply(AI.getLoc(), FRI,
SubstitutionMap(), NewArgs,
TAI->getNormalBB(), TAI->getErrorBB());
// If we passed in the original closure as @owned, then insert a release
// right after NewAI. This is to balance the +1 from being an @owned
// argument to AI.
if (!CSDesc.isClosureConsumed() || !CSDesc.closureHasRefSemanticContext()) {
break;
}
Builder.setInsertionPoint(TAI->getNormalBB()->begin());
Builder.createReleaseValue(Closure->getLoc(), Closure,
Builder.getDefaultAtomicity());
Builder.setInsertionPoint(TAI->getErrorBB()->begin());
Builder.createReleaseValue(Closure->getLoc(), Closure,
Builder.getDefaultAtomicity());
Builder.setInsertionPoint(AI.getInstruction());
break;
}
case FullApplySiteKind::ApplyInst: {
auto oldApply = cast<ApplyInst>(AI);
auto newApply = Builder.createApply(oldApply->getLoc(), FRI,
SubstitutionMap(),
NewArgs, oldApply->isNonThrowing());
// If we passed in the original closure as @owned, then insert a release
// right after NewAI. This is to balance the +1 from being an @owned
// argument to AI.
if (CSDesc.isClosureConsumed() && CSDesc.closureHasRefSemanticContext())
Builder.createReleaseValue(Closure->getLoc(), Closure,
Builder.getDefaultAtomicity());
// Replace all uses of the old apply with the new apply.
oldApply->replaceAllUsesWith(newApply);
break;
}
case FullApplySiteKind::BeginApplyInst:
llvm_unreachable("Unhandled case");
}
// Erase the old apply.
AI.getInstruction()->eraseFromParent();
// TODO: Maybe include invalidation code for CallSiteDescriptor after we erase
// AI from parent?
}
/// Update the callsite to pass in the correct arguments.
static void rewriteApplyInst(const CallSiteDescriptor &CSDesc,
SILFunction *NewF) {
FullApplySite AI = CSDesc.getApplyInst();
SILInstruction *Closure = CSDesc.getClosure();
SILBuilderWithScope Builder(Closure);
FunctionRefInst *FRI = Builder.createFunctionRef(AI.getLoc(), NewF);
// Create the args for the new apply by removing the closure argument...
llvm::SmallVector<SILValue, 8> NewArgs;
unsigned Index = 0;
for (auto Arg : AI.getArguments()) {
if (Index != CSDesc.getClosureIndex())
NewArgs.push_back(Arg);
Index++;
}
// ... and appending the captured arguments. We also insert retains here at
// the location of the original closure. This is needed to balance the
// implicit release of all captured arguments that occurs when the partial
// apply is destroyed.
SILModule &M = NewF->getModule();
for (auto Arg : CSDesc.getArguments()) {
NewArgs.push_back(Arg);
SILType ArgTy = Arg->getType();
// If our argument is of trivial type, continue...
if (ArgTy.isTrivial(M))
continue;
// TODO: When we support address types, this code path will need to be
// updated.
// We need to balance the consumed argument of the new partial_apply in the
// specialized callee by a retain. If both the original partial_apply and
// the apply of the callee are in the same basic block we can assume they
// are executed the same number of times. Therefore it is sufficient to just
// retain the argument at the site of the original partial_apply.
//
// %closure = partial_apply (%arg)
// = apply %callee(%closure)
// =>
// retain %arg
// %closure = partial_apply (%arg)
// apply %specialized_callee(..., %arg)
//
// However, if they are not in the same basic block the callee might be
// executed more frequently than the closure (for example, if the closure is
// created in a loop preheader and the callee taking the closure is executed
// in the loop). In such a case we must keep the argument live across the
// call site of the callee and emit a matching retain for every invocation
// of the callee.
//
// %closure = partial_apply (%arg)
//
// while () {
// = %callee(%closure)
// }
// =>
// retain %arg
// %closure = partial_apply (%arg)
//
// while () {
// retain %arg
// apply %specialized_callee(.., %arg)
// }
// release %arg
//
if (AI.getParent() != Closure->getParent()) {
// Emit the retain and release that keeps the argument life across the
// callee using the closure.
CSDesc.extendArgumentLifetime(Arg);
// Emit the retain that matches the captured argument by the partial_apply
// in the callee that is consumed by the partial_apply.
Builder.setInsertionPoint(AI.getInstruction());
Builder.createRetainValue(Closure->getLoc(), Arg, Atomicity::Atomic);
} else {
Builder.createRetainValue(Closure->getLoc(), Arg, Atomicity::Atomic);
}
}
SILType LoweredType = NewF->getLoweredType();
SILType ResultType = LoweredType.castTo<SILFunctionType>()->getSILResult();
Builder.setInsertionPoint(AI.getInstruction());
FullApplySite NewAI;
if (auto *TAI = dyn_cast<TryApplyInst>(AI)) {
NewAI = Builder.createTryApply(AI.getLoc(), FRI, LoweredType,
ArrayRef<Substitution>(),
NewArgs,
TAI->getNormalBB(), TAI->getErrorBB());
// If we passed in the original closure as @owned, then insert a release
// right after NewAI. This is to balance the +1 from being an @owned
// argument to AI.
if (CSDesc.isClosureConsumed() && CSDesc.closureHasRefSemanticContext()) {
Builder.setInsertionPoint(TAI->getNormalBB()->begin());
Builder.createReleaseValue(Closure->getLoc(), Closure, Atomicity::Atomic);
Builder.setInsertionPoint(TAI->getErrorBB()->begin());
Builder.createReleaseValue(Closure->getLoc(), Closure, Atomicity::Atomic);
Builder.setInsertionPoint(AI.getInstruction());
}
} else {
NewAI = Builder.createApply(AI.getLoc(), FRI, LoweredType,
ResultType, ArrayRef<Substitution>(),
NewArgs, cast<ApplyInst>(AI)->isNonThrowing());
// If we passed in the original closure as @owned, then insert a release
// right after NewAI. This is to balance the +1 from being an @owned
// argument to AI.
if (CSDesc.isClosureConsumed() && CSDesc.closureHasRefSemanticContext())
Builder.createReleaseValue(Closure->getLoc(), Closure, Atomicity::Atomic);
}
// Replace all uses of the old apply with the new apply.
if (isa<ApplyInst>(AI))
AI.getInstruction()->replaceAllUsesWith(NewAI.getInstruction());
// Erase the old apply.
AI.getInstruction()->eraseFromParent();
// TODO: Maybe include invalidation code for CallSiteDescriptor after we erase
// AI from parent?
}