/**
Entry point for Acpi platform driver.
@param[in] ImageHandle A handle for the image that is initializing this driver.
@param[in] SystemTable A pointer to the EFI system table.
@retval EFI_SUCCESS Driver initialized successfully.
@retval EFI_LOAD_ERROR Failed to Initialize or has been loaded.
@retval EFI_OUT_OF_RESOURCES Could not allocate needed resources.
**/
EFI_STATUS
EFIAPI
AcpiPlatformEntryPoint (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
EFI_STATUS AcpiStatus;
EFI_ACPI_SUPPORT_PROTOCOL *AcpiSupport;
EFI_FIRMWARE_VOLUME_PROTOCOL *FwVol;
INTN Instance;
EFI_ACPI_COMMON_HEADER *CurrentTable;
UINTN TableHandle;
UINT32 FvStatus;
UINT32 Size;
EFI_EVENT Event;
EFI_ACPI_TABLE_VERSION TableVersion;
UINTN VarSize;
UINTN SysCfgSize;
EFI_HANDLE Handle;
EFI_PS2_POLICY_PROTOCOL *Ps2Policy;
EFI_PEI_HOB_POINTERS GuidHob;
UINT8 PortData;
EFI_MP_SERVICES_PROTOCOL *MpService;
UINTN MaximumNumberOfCPUs;
UINTN NumberOfEnabledCPUs;
UINT32 Data32;
PCH_STEPPING pchStepping;
mFirstNotify = FALSE;
TableVersion = EFI_ACPI_TABLE_VERSION_2_0;
Instance = 0;
CurrentTable = NULL;
TableHandle = 0;
Data32 = 0;
//
// Update HOB variable for PCI resource information.
// Get the HOB list. If it is not present, then ASSERT.
//
GuidHob.Raw = GetHobList ();
if (GuidHob.Raw != NULL) {
if ((GuidHob.Raw = GetNextGuidHob (&gEfiPlatformInfoGuid, GuidHob.Raw)) != NULL) {
mPlatformInfo = GET_GUID_HOB_DATA (GuidHob.Guid);
}
}
//
// Search for the Memory Configuration GUID HOB. If it is not present, then
// there's nothing we can do. It may not exist on the update path.
//
VarSize = sizeof(SYSTEM_CONFIGURATION);
Status = gRT->GetVariable(
L"Setup",
&mSystemConfigurationGuid,
NULL,
&VarSize,
&mSystemConfiguration
);
ASSERT_EFI_ERROR (Status);
//
// Find the AcpiSupport protocol.
//
Status = LocateSupportProtocol (&gEfiAcpiSupportProtocolGuid, (VOID **) &AcpiSupport, 0);
ASSERT_EFI_ERROR (Status);
//
// Locate the firmware volume protocol.
//
Status = LocateSupportProtocol (&gEfiFirmwareVolumeProtocolGuid, (VOID **) &FwVol, 1);
ASSERT_EFI_ERROR (Status);
//
// Read the current system configuration variable store.
//
SysCfgSize = sizeof(SYSTEM_CONFIGURATION);
Status = gRT->GetVariable (
L"Setup",
&gEfiNormalSetupGuid,
NULL,
&SysCfgSize,
&mSystemConfig
);
Status = EFI_SUCCESS;
Instance = 0;
//
// TBD: Need re-design based on the ValleyTrail platform.
//
Status = gBS->LocateProtocol (
&gEfiMpServiceProtocolGuid,
NULL,
(VOID **) &MpService
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Determine the number of processors.
//
MpService->GetNumberOfProcessors (
MpService,
&MaximumNumberOfCPUs,
&NumberOfEnabledCPUs
);
//
// Allocate and initialize the NVS area for SMM and ASL communication.
//
Status = gBS->AllocatePool (
EfiACPIMemoryNVS,
sizeof (EFI_GLOBAL_NVS_AREA),
(void **)&mGlobalNvsArea.Area
);
ASSERT_EFI_ERROR (Status);
gBS->SetMem (
mGlobalNvsArea.Area,
sizeof (EFI_GLOBAL_NVS_AREA),
0
);
DEBUG((EFI_D_ERROR, "mGlobalNvsArea.Area is at 0x%X\n", mGlobalNvsArea.Area));
//
// Update global NVS area for ASL and SMM init code to use.
//
mGlobalNvsArea.Area->ApicEnable = 1;
mGlobalNvsArea.Area->EmaEnable = 0;
mGlobalNvsArea.Area->NumberOfBatteries = 1;
mGlobalNvsArea.Area->BatteryCapacity0 = 100;
mGlobalNvsArea.Area->BatteryStatus0 = 84;
mGlobalNvsArea.Area->OnboardCom = 1;
mGlobalNvsArea.Area->IdeMode = 0;
mGlobalNvsArea.Area->PowerState = 0;
mGlobalNvsArea.Area->LogicalProcessorCount = (UINT8)NumberOfEnabledCPUs;
mGlobalNvsArea.Area->PassiveThermalTripPoint = mSystemConfiguration.PassiveThermalTripPoint;
mGlobalNvsArea.Area->PassiveTc1Value = mSystemConfiguration.PassiveTc1Value;
mGlobalNvsArea.Area->PassiveTc2Value = mSystemConfiguration.PassiveTc2Value;
mGlobalNvsArea.Area->PassiveTspValue = mSystemConfiguration.PassiveTspValue;
mGlobalNvsArea.Area->CriticalThermalTripPoint = mSystemConfiguration.CriticalThermalTripPoint;
mGlobalNvsArea.Area->IgdPanelType = mSystemConfiguration.IgdFlatPanel;
mGlobalNvsArea.Area->IgdPanelScaling = mSystemConfiguration.PanelScaling;
mGlobalNvsArea.Area->IgdSciSmiMode = 0;
mGlobalNvsArea.Area->IgdTvFormat = 0;
mGlobalNvsArea.Area->IgdTvMinor = 0;
mGlobalNvsArea.Area->IgdSscConfig = 1;
mGlobalNvsArea.Area->IgdBiaConfig = mSystemConfiguration.IgdLcdIBia;
mGlobalNvsArea.Area->IgdBlcConfig = mSystemConfiguration.IgdLcdIGmchBlc;
mGlobalNvsArea.Area->IgdDvmtMemSize = mSystemConfiguration.IgdDvmt50TotalAlloc;
mGlobalNvsArea.Area->IgdPAVP = mSystemConfiguration.PavpMode;
mGlobalNvsArea.Area->AlsEnable = mSystemConfiguration.AlsEnable;
mGlobalNvsArea.Area->BacklightControlSupport = 2;
mGlobalNvsArea.Area->BrightnessPercentage = 100;
mGlobalNvsArea.Area->IgdState = 1;
mGlobalNvsArea.Area->LidState = 1;
mGlobalNvsArea.Area->DeviceId1 = 0x80000100 ;
mGlobalNvsArea.Area->DeviceId2 = 0x80000400 ;
mGlobalNvsArea.Area->DeviceId3 = 0x80000200 ;
mGlobalNvsArea.Area->DeviceId4 = 0x04;
mGlobalNvsArea.Area->DeviceId5 = 0x05;
mGlobalNvsArea.Area->NumberOfValidDeviceId = 4 ;
mGlobalNvsArea.Area->CurrentDeviceList = 0x0F ;
mGlobalNvsArea.Area->PreviousDeviceList = 0x0F ;
mGlobalNvsArea.Area->UartSelection = mSystemConfiguration.UartInterface;
mGlobalNvsArea.Area->PcuUart1Enable = mSystemConfiguration.PcuUart1;
mGlobalNvsArea.Area->NativePCIESupport = 1;
//
// Update BootMode: 0:ACPI mode; 1:PCI mode
//
mGlobalNvsArea.Area->LpssSccMode = mSystemConfiguration.LpssPciModeEnabled;
if (mSystemConfiguration.LpssMipiHsi == 0) {
mGlobalNvsArea.Area->MipiHsiAddr = 0;
mGlobalNvsArea.Area->MipiHsiLen = 0;
mGlobalNvsArea.Area->MipiHsi1Addr = 0;
mGlobalNvsArea.Area->MipiHsi1Len = 0;
}
//
// Platform Flavor
//
mGlobalNvsArea.Area->PlatformFlavor = mPlatformInfo->PlatformFlavor;
//
// Update the Platform id
//
mGlobalNvsArea.Area->BoardID = mPlatformInfo->BoardId;
//
// Update the Board Revision
//
mGlobalNvsArea.Area->FabID = mPlatformInfo->BoardRev;
//
// Update SOC Stepping
//
mGlobalNvsArea.Area->SocStepping = (UINT8)(PchStepping());
mGlobalNvsArea.Area->OtgMode = mSystemConfiguration.PchUsbOtg;
pchStepping = PchStepping();
if (mSystemConfiguration.UsbAutoMode == 1) {
//
// Auto mode is enabled.
//
if (PchA0 == pchStepping) {
//
// For A0, EHCI is enabled as default.
//
mSystemConfiguration.PchUsb20 = 1;
mSystemConfiguration.PchUsb30Mode = 0;
mSystemConfiguration.UsbXhciSupport = 0;
DEBUG ((EFI_D_INFO, "EHCI is enabled as default. SOC 0x%x\n", pchStepping));
} else {
//
// For A1 and later, XHCI is enabled as default.
//
mSystemConfiguration.PchUsb20 = 0;
mSystemConfiguration.PchUsb30Mode = 1;
mSystemConfiguration.UsbXhciSupport = 1;
DEBUG ((EFI_D_INFO, "XHCI is enabled as default. SOC 0x%x\n", pchStepping));
}
}
mGlobalNvsArea.Area->XhciMode = mSystemConfiguration.PchUsb30Mode;
mGlobalNvsArea.Area->Stepping = mPlatformInfo->IchRevision;
//
// Override invalid Pre-Boot Driver and XhciMode combination.
//
if ((mSystemConfiguration.UsbXhciSupport == 0) && (mSystemConfiguration.PchUsb30Mode == 3)) {
mGlobalNvsArea.Area->XhciMode = 2;
}
if ((mSystemConfiguration.UsbXhciSupport == 1) && (mSystemConfiguration.PchUsb30Mode == 2)) {
mGlobalNvsArea.Area->XhciMode = 3;
}
DEBUG ((EFI_D_ERROR, "ACPI NVS XHCI:0x%x\n", mGlobalNvsArea.Area->XhciMode));
mGlobalNvsArea.Area->PmicEnable = GLOBAL_NVS_DEVICE_DISABLE;
mGlobalNvsArea.Area->BatteryChargingSolution = GLOBAL_NVS_DEVICE_DISABLE;
mGlobalNvsArea.Area->ISPDevSel = mSystemConfiguration.ISPDevSel;
mGlobalNvsArea.Area->LpeEnable = mSystemConfiguration.Lpe;
if (mSystemConfiguration.ISPEn == 0) {
mGlobalNvsArea.Area->ISPDevSel = GLOBAL_NVS_DEVICE_DISABLE;
}
mGlobalNvsArea.Area->WittEnable = mSystemConfiguration.WittEnable;
mGlobalNvsArea.Area->UtsEnable = mSystemConfiguration.UtsEnable;
mGlobalNvsArea.Area->SarEnable = mSystemConfiguration.SAR1;
mGlobalNvsArea.Area->ReservedO = 1;
SettingI2CTouchAddress();
mGlobalNvsArea.Area->IdleReserve= mSystemConfiguration.IdleReserve;
//
// Read BMBOUND and store it in GlobalNVS to pass into ASL.
//
// BUGBUG: code was moved into silicon reference code.
//
if (mSystemConfiguration.eMMCBootMode== 1) {
//
// Auto detect mode.
//
DEBUG ((EFI_D_ERROR, "Auto detect mode------------start\n"));
//
// Silicon Steppings.
//
switch (PchStepping()) {
case PchA0: // A0/A1
case PchA1:
DEBUG ((EFI_D_ERROR, "SOC A0/A1: eMMC 4.41 Configuration\n"));
mSystemConfiguration.LpsseMMCEnabled = 1;
mSystemConfiguration.LpsseMMC45Enabled = 0;
break;
case PchB0: // B0 and later.
default:
DEBUG ((EFI_D_ERROR, "SOC B0 and later: eMMC 4.5 Configuration\n"));
mSystemConfiguration.LpsseMMCEnabled = 0;
mSystemConfiguration.LpsseMMC45Enabled = 1;
break;
}
} else if (mSystemConfiguration.eMMCBootMode == 2) {
//
// eMMC 4.41
//
DEBUG ((EFI_D_ERROR, "Force to eMMC 4.41 Configuration\n"));
mSystemConfiguration.LpsseMMCEnabled = 1;
mSystemConfiguration.LpsseMMC45Enabled = 0;
} else if (mSystemConfiguration.eMMCBootMode == 3) {
//
// eMMC 4.5
//
DEBUG ((EFI_D_ERROR, "Force to eMMC 4.5 Configuration\n"));
mSystemConfiguration.LpsseMMCEnabled = 0;
mSystemConfiguration.LpsseMMC45Enabled = 1;
} else {
//
// Disable eMMC controllers.
//
DEBUG ((EFI_D_ERROR, "Disable eMMC controllers\n"));
mSystemConfiguration.LpsseMMCEnabled = 0;
mSystemConfiguration.LpsseMMC45Enabled = 0;
}
mGlobalNvsArea.Area->emmcVersion = 0;
if (mSystemConfiguration.LpsseMMCEnabled) {
DEBUG ((EFI_D_ERROR, "mGlobalNvsArea.Area->emmcVersion = 0\n"));
mGlobalNvsArea.Area->emmcVersion = 0;
}
if (mSystemConfiguration.LpsseMMC45Enabled) {
DEBUG ((EFI_D_ERROR, "mGlobalNvsArea.Area->emmcVersion = 1\n"));
mGlobalNvsArea.Area->emmcVersion = 1;
}
mGlobalNvsArea.Area->SdCardRemovable = mSystemConfiguration.SdCardRemovable;
//
// Microsoft IOT
//
if ((mSystemConfiguration.LpssHsuart0FlowControlEnabled == 1) && \
(mSystemConfiguration.LpssPwm0Enabled == 0) && \
(mSystemConfiguration.LpssPwm1Enabled == 0)) {
mGlobalNvsArea.Area->MicrosoftIoT = GLOBAL_NVS_DEVICE_ENABLE;
DEBUG ((EFI_D_ERROR, "JP1 is set to be MSFT IOT configuration.\n"));
} else {
mGlobalNvsArea.Area->MicrosoftIoT = GLOBAL_NVS_DEVICE_DISABLE;
DEBUG ((EFI_D_ERROR, "JP1 is not set to be MSFT IOT configuration.\n"));
}
//
// SIO related option.
//
Status = gBS->LocateProtocol (&gEfiCpuIoProtocolGuid, NULL, (void **)&mCpuIo);
ASSERT_EFI_ERROR (Status);
mGlobalNvsArea.Area->WPCN381U = GLOBAL_NVS_DEVICE_DISABLE;
mGlobalNvsArea.Area->DockedSioPresent = GLOBAL_NVS_DEVICE_DISABLE;
if (mGlobalNvsArea.Area->DockedSioPresent != GLOBAL_NVS_DEVICE_ENABLE) {
//
// Check ID for SIO WPCN381U.
//
Status = mCpuIo->Io.Read (
mCpuIo,
EfiCpuIoWidthUint8,
WPCN381U_CONFIG_INDEX,
1,
&PortData
);
ASSERT_EFI_ERROR (Status);
if (PortData != 0xFF) {
PortData = 0x20;
Status = mCpuIo->Io.Write (
mCpuIo,
EfiCpuIoWidthUint8,
WPCN381U_CONFIG_INDEX,
1,
&PortData
);
ASSERT_EFI_ERROR (Status);
Status = mCpuIo->Io.Read (
mCpuIo,
EfiCpuIoWidthUint8,
WPCN381U_CONFIG_DATA,
1,
&PortData
);
ASSERT_EFI_ERROR (Status);
if ((PortData == WPCN381U_CHIP_ID) || (PortData == WDCP376_CHIP_ID)) {
mGlobalNvsArea.Area->WPCN381U = GLOBAL_NVS_DEVICE_ENABLE;
mGlobalNvsArea.Area->OnboardCom = GLOBAL_NVS_DEVICE_ENABLE;
mGlobalNvsArea.Area->OnboardComCir = GLOBAL_NVS_DEVICE_DISABLE;
}
}
}
//
// Get Ps2 policy to set. Will be use if present.
//
Status = gBS->LocateProtocol (
&gEfiPs2PolicyProtocolGuid,
NULL,
(VOID **)&Ps2Policy
);
if (!EFI_ERROR (Status)) {
Status = Ps2Policy->Ps2InitHardware (ImageHandle);
}
mGlobalNvsArea.Area->SDIOMode = mSystemConfiguration.LpssSdioMode;
Handle = NULL;
Status = gBS->InstallMultipleProtocolInterfaces (
&Handle,
&gEfiGlobalNvsAreaProtocolGuid,
&mGlobalNvsArea,
NULL
);
//
// Read tables from the storage file.
//
while (!EFI_ERROR (Status)) {
CurrentTable = NULL;
Status = FwVol->ReadSection (
FwVol,
&gEfiAcpiTableStorageGuid,
EFI_SECTION_RAW,
Instance,
(VOID **) &CurrentTable,
(UINTN *) &Size,
&FvStatus
);
if (!EFI_ERROR (Status)) {
//
// Allow platform specific code to reject the table or update it.
//
AcpiStatus = AcpiPlatformHooksIsActiveTable (CurrentTable);
if (!EFI_ERROR (AcpiStatus)) {
//
// Perform any table specific updates.
//
AcpiStatus = PlatformUpdateTables (CurrentTable);
if (!EFI_ERROR (AcpiStatus)) {
//
// Add the table.
//
TableHandle = 0;
AcpiStatus = AcpiSupport->SetAcpiTable (
AcpiSupport,
CurrentTable,
TRUE,
TableVersion,
&TableHandle
);
ASSERT_EFI_ERROR (AcpiStatus);
}
}
//
// Increment the instance.
//
Instance++;
}
}
Status = EfiCreateEventReadyToBootEx (
TPL_NOTIFY,
OnReadyToBoot,
NULL,
&Event
);
//
// Finished.
//
return EFI_SUCCESS;
}
VOID
IScsiPublishIbft (
IN VOID
)
/*++
Routine Description:
Publish and remove the iSCSI Boot Firmware Table according to the iSCSI
session status.
Arguments:
None.
Returns:
None.
--*/
{
EFI_STATUS Status;
UINTN TableHandle;
EFI_ACPI_SUPPORT_PROTOCOL *AcpiSupport;
EFI_ACPI_ISCSI_BOOT_FIRMWARE_TABLE_HEADER *Table;
EFI_ACPI_3_0_ROOT_SYSTEM_DESCRIPTION_POINTER *Rsdp;
EFI_ACPI_DESCRIPTION_HEADER *Rsdt;
UINTN HandleCount;
EFI_HANDLE *HandleBuffer;
UINT8 *Heap;
UINTN Index;
INTN TableIndex;
EFI_ACPI_TABLE_VERSION Version;
UINT32 Signature;
Status = gBS->LocateProtocol (&gEfiAcpiSupportGuid, NULL, &AcpiSupport);
if (EFI_ERROR (Status)) {
return ;
}
//
// Find ACPI table RSD_PTR from system table
//
for (Index = 0, Rsdp = NULL; Index < gST->NumberOfTableEntries; Index++) {
if (EfiCompareGuid (&(gST->ConfigurationTable[Index].VendorGuid), &gEfiAcpi30TableGuid) ||
EfiCompareGuid (&(gST->ConfigurationTable[Index].VendorGuid), &gEfiAcpi20TableGuid) ||
EfiCompareGuid (&(gST->ConfigurationTable[Index].VendorGuid), &gEfiAcpiTableGuid)
) {
//
// A match was found.
//
Rsdp = (EFI_ACPI_3_0_ROOT_SYSTEM_DESCRIPTION_POINTER *) gST->ConfigurationTable[Index].VendorTable;
break;
}
}
if (Rsdp == NULL) {
return ;
} else {
Rsdt = (EFI_ACPI_DESCRIPTION_HEADER *) (UINTN) Rsdp->RsdtAddress;
}
//
// Try to remove the old iSCSI Boot Firmware Table.
//
for (TableIndex = 0;; TableIndex++) {
Status = AcpiSupport->GetAcpiTable (
AcpiSupport,
TableIndex,
&Table,
&Version,
&TableHandle
);
if (EFI_ERROR (Status)) {
break;
}
Signature = Table->Signature;
NetFreePool (Table);
if (Signature == EFI_ACPI_3_0_ISCSI_BOOT_FIRMWARE_TABLE_SIGNATURE) {
//
// Remove the table.
//
Status = AcpiSupport->SetAcpiTable (
AcpiSupport,
NULL,
FALSE,
Version,
&TableHandle
);
if (EFI_ERROR (Status)) {
return ;
}
break;
}
}
//
// Get all iSCSI private protocols.
//
Status = gBS->LocateHandleBuffer (
ByProtocol,
&mIScsiPrivateGuid,
NULL,
&HandleCount,
&HandleBuffer
);
if (EFI_ERROR (Status)) {
return ;
}
//
// Allocate 4k bytes to hold the ACPI table.
//
Table = NetAllocatePool (IBFT_MAX_SIZE);
if (Table == NULL) {
return ;
}
Heap = (CHAR8 *) Table + IBFT_HEAP_OFFSET;
//
// Fill in the various section of the iSCSI Boot Firmware Table.
//
IScsiInitIbfTableHeader (Table, Rsdt->OemId, &Rsdt->OemTableId);
IScsiInitControlSection (Table, HandleCount);
IScsiFillInitiatorSection (Table, &Heap, HandleBuffer[0]);
IScsiFillNICAndTargetSections (Table, &Heap, HandleCount, HandleBuffer);
NetFreePool (HandleBuffer);
TableHandle = 0;
//
// Install or update the iBFT table.
//
Status = AcpiSupport->SetAcpiTable (
AcpiSupport,
Table,
TRUE,
EFI_ACPI_TABLE_VERSION_3_0,
&TableHandle
);
if (!EFI_ERROR (Status)) {
AcpiSupport->PublishTables (AcpiSupport, EFI_ACPI_TABLE_VERSION_3_0);
}
NetFreePool (Table);
}
VOID
EFIAPI
fTPMAcpiEvent (
IN EFI_EVENT Event,
IN VOID *Context
)
{
EFI_STATUS Status;
EFI_ACPI_SUPPORT_PROTOCOL *AcpiSupport;
UINTN TableHandle;
TPM2_CONTROL_AREA *Tpm2ControlArea;
UINT8 *Tpm2AcpiDataPtr;
UINT32 *Memory32Fixed;
EFI_ACPI_TABLE_VERSION Version;
EFI_PHYSICAL_ADDRESS PspBar1Addr;
gBS->CloseEvent (Event);
//
// Locate ACPISupport table. Bail if absent
//
Status = gBS->LocateProtocol (
&gEfiAcpiSupportGuid,
NULL,
&AcpiSupport);
if (EFI_ERROR (Status)) {
return;
}
if (GetPspBar1Addr (&PspBar1Addr)) {
return;
}
Tpm2ControlArea = (TPM2_CONTROL_AREA *) (UINTN) PspBar1Addr;
// Update the TPM ACPI Table for ControlArea location
Tpm2AcpiTable.ControlArea = (EFI_PHYSICAL_ADDRESS) Tpm2ControlArea + 0x10;
//
// Install the ACPI Table
//
PSP_DEBUG ("\tInstall ACPI TPM2 Table\n");
TableHandle = 0;
//(EFI_ACPI_TABLE_VERSION_1_0B | EFI_ACPI_TABLE_VERSION_2_0 | EFI_ACPI_TABLE_VERSION_3_0 |
// EFI_ACPI_TABLE_VERSION_4_0 | EFI_ACPI_TABLE_VERSION_5_0)
Version = 0x3E;
Status = AcpiSupport->SetAcpiTable (
AcpiSupport,
&Tpm2AcpiTable,
TRUE,
Version,
&TableHandle
);
if (EFI_ERROR (Status)) {
return;
}
PSP_DEBUG ("\tUpdate _CRS Object with actual value\n");
//Update _CRS Object with actual value
for (Tpm2AcpiDataPtr = ((UINT8 *)fTPMAmlData + sizeof (EFI_ACPI_DESCRIPTION_HEADER));
Tpm2AcpiDataPtr <= ((UINT8 *)fTPMAmlData + ((EFI_ACPI_DESCRIPTION_HEADER *)fTPMAmlData)->Length);
Tpm2AcpiDataPtr++
) {
Memory32Fixed = (UINT32 *)Tpm2AcpiDataPtr;
switch (*Memory32Fixed) {
//TPM2.0 Command Buffer allocate by BIOS, should be updated during POST
//Memory32Fixed (ReadWrite, 0xBBBBBBBB, 0x100000)
case 0xBBBBBBBB:
*Memory32Fixed = (UINT32) (Tpm2ControlArea->CommandAddress);
PSP_DEBUG ("Tpm2ControlArea->CommandAddress %x\n", Tpm2ControlArea->CommandAddress);
Tpm2AcpiDataPtr += (sizeof (UINT32) - 1);
break;
//TPM2.0 Response Buffer allocate by BIOS, should be updated during POST
//Memory32Fixed (ReadWrite, 0xCCCCCCCC, 0x100000)
case 0xCCCCCCCC:
*Memory32Fixed = (UINT32) (Tpm2ControlArea->ResponseAddress);
PSP_DEBUG ("Tpm2ControlArea->ResponseAddress %x\n", Tpm2ControlArea->ResponseAddress);
Tpm2AcpiDataPtr += (sizeof (UINT32) - 1);
break;
default:
break;
}
}
PSP_DEBUG ("\tInstall Tpm SSDT table\n");
TableHandle = 0;
AcpiSupport->SetAcpiTable (
AcpiSupport,
fTPMAmlData,
TRUE,
Version,
&TableHandle
);
if (EFI_ERROR (Status)) {
return;
}
PSP_DEBUG ("PublishTables ACPI table\n");
Status = AcpiSupport->PublishTables (AcpiSupport, Version);
if (EFI_ERROR (Status)) {
return;
}
PSP_DEBUG ("fTPMAcpiEvent exit\n");
}
EFI_STATUS
AmdFchWheaInitEntryEinj (
VOID
)
{
EFI_ACPI_SUPPORT_PROTOCOL *AcpiSupport;
EFI_STATUS Status;
INTN Index;
UINTN Handle;
EFI_ACPI_TABLE_VERSION Version;
EFI_ACPI_DESCRIPTION_HEADER *Table;
EFI_ACPI_DESCRIPTION_HEADER *NewTable;
Status = gBS->LocateProtocol (
&gEfiAcpiSupportGuid,
NULL,
&AcpiSupport
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Search EINJ table
//
Index = 0;
Handle = 0;
do {
Table = NULL;
Status = AcpiSupport->GetAcpiTable (
AcpiSupport,
Index,
&Table,
&Version,
&Handle
);
if (EFI_ERROR (Status)) {
break;
}
//
// Check Signture and update EINJ table
//
if (Table->Signature == 0x4A4E4945) {
//
// allocate memory for new Table
//
Status = gBS->AllocatePool (
EfiReservedMemoryType,
MAX_EINJ_SIZE,
&NewTable
);
if (Status != EFI_SUCCESS) {
return Status;
}
EfiZeroMem (NewTable, MAX_EINJ_SIZE);
//
// Copy Table
//
EfiCopyMem (NewTable, Table, Table->Length);
//
// Update new table
//
AmdFchUpdateEinj (NewTable);
if (!EFI_ERROR (Status)) {
// Patch EINJ table here and save table back.
//
// Remove previous table
//
gBS->FreePool (Table);
Table = NULL;
Status = AcpiSupport->SetAcpiTable (
AcpiSupport,
Table,
TRUE,
Version,
&Handle
);
//
// Add new table
//
Handle = 0;
Status = AcpiSupport->SetAcpiTable (
AcpiSupport,
NewTable,
TRUE,
Version,
&Handle
);
gBS->FreePool (NewTable);
return Status;
}
gBS->FreePool (NewTable);
}
gBS->FreePool (Table);
Index++;
} while (TRUE);
return Status;
}
/**
*---------------------------------------------------------------------------------------
*
* AddApeiTables
*
* Description:
* Event Callback that adds the APEI Tables to OS.
*
* Parameters:
* @param[in] Event
* @param[in] *Context
*
* @retval EFI_SUCCESS Error record has been added to BERT table
* EFI_UNSUPPORTED ErrorType passed in is unsupported
* EFI_OUT_OF_RESOURCES Could not allocate memory
* EFI_VOLUME_FULL Cannot add one more error record
*
*---------------------------------------------------------------------------------------
**/
VOID
AddApeiTables (
IN EFI_EVENT Event,
IN VOID *Context
)
{
EFI_STATUS Status = EFI_SUCCESS;
EFI_ACPI_SUPPORT_PROTOCOL *AcpiSupportProtocol = NULL;
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo = NULL;
UINTN BertTblHandle;
UINTN EinjTblHandle;
UINT32 Value32;
// UINTN ErstTblHandle;
BertTblHandle = 0;
EinjTblHandle = 0;
//ErstTblHandle = 0;
// Local ACPI Protocol
Status = gBS->LocateProtocol (
&gAcpiSupportGuid,
NULL,
&AcpiSupportProtocol
);
if (EFI_ERROR (Status)) {
return;
}
//Add BERT table to the ACPI aware OS
Status = AcpiSupportProtocol->SetAcpiTable (
AcpiSupportProtocol, // IN EFI_ACPI_SUPPORT_PROTOCOL *This
mApeiInterface->ApeiPrivData->ApeiBertTbl, // IN VOID *Table OPTIONAL
TRUE, // IN BOOLEAN Checksum
EFI_ACPI_TABLE_VERSION_ALL, // IN EFI_ACPI_TABLE_VERSION Version
&BertTblHandle // IN OUT UINTN *TableHandle
);
ASSERT_EFI_ERROR (Status);
// Locate PCI Root Bridge Protocol
Status = gBS->LocateProtocol (
&gEfiPciRootBridgeIoProtocolGuid,
NULL,
(VOID**) &PciRootBridgeIo
);
if (EFI_ERROR (Status)) {
return;
}
// Check to see if ECC is enabled before adding EINJ table
PciRootBridgeIo->Pci.Read (
PciRootBridgeIo,
EfiPciWidthUint32,
EFI_PCI_ADDRESS (0, 0x18, 0x3, 0x44),
1,
&Value32
);
if (Value32 & (1 << 22)) {
//
//Add EINJ table to the ACPI aware OS
//
Status = AcpiSupportProtocol->SetAcpiTable (
AcpiSupportProtocol, // IN EFI_ACPI_SUPPORT_PROTOCOL *This
mApeiInterface->ApeiPrivData->ApeiEinjTbl, // IN VOID *Table OPTIONAL
TRUE, // IN BOOLEAN Checksum
EFI_ACPI_TABLE_VERSION_ALL, // IN EFI_ACPI_TABLE_VERSION Version
&EinjTblHandle // IN OUT UINTN *TableHandle
);
ASSERT_EFI_ERROR (Status);
}
// Uncomment code below to publish ERST Table to OS
//Add ERST table
//Status = AcpiSupportProtocol->SetAcpiTable (
// AcpiSupportProtocol, // IN EFI_ACPI_SUPPORT_PROTOCOL *This
// mApeiInterface->ApeiPrivData->ApeiErstTbl, // IN VOID *Table OPTIONAL
// TRUE, // IN BOOLEAN Checksum
// EFI_ACPI_TABLE_VERSION_ALL, // IN EFI_ACPI_TABLE_VERSION Version
// &ErstTblHandle // IN OUT UINTN *TableHandle
// );
//
//ASSERT_EFI_ERROR (Status);
// Close the APEI ready2boot event
gBS->CloseEvent (mEvtApeiReadyToBoot);
return;
}
EFI_STATUS
EFIAPI
AmdRasApeiDxeDriverEntryPoint (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status = EFI_SUCCESS;
EFI_HANDLE Handle = NULL;
EFI_HANDLE hEinj = NULL;
AMD_RAS_APEI_PROTOCOL *AmdRasApeiProtocol;
BOOLEAN InSmm;
EFI_SMM_BASE_PROTOCOL *SmmBase = NULL;
EFI_DEVICE_PATH_PROTOCOL *ImageDevicePath = NULL;
EFI_DEVICE_PATH_PROTOCOL *NewFilePath = NULL;
EFI_LOADED_IMAGE_PROTOCOL *LoadedImage = NULL;
EFI_SMM_SW_DISPATCH_PROTOCOL *SwDispatch = NULL;
EFI_SMM_SW_DISPATCH_CONTEXT SwContext;
EFI_ACPI_SUPPORT_PROTOCOL *AcpiSupportProtocol = NULL;
EFI_HANDLE SwHandle = NULL;
EFI_HANDLE hNewHandle = NULL;
UINTN BufferSize;
UINTN HestTblHandle;
UINT64 Address64;
UINT32 Value32;
//
// Initialize Local Variables
//
InSmm = FALSE;
BufferSize = 0;
HestTblHandle = 0;
//
// Initialize Global Variables
//
EfiInitializeApei (ImageHandle, SystemTable);
// Locate SMM Base Protocol
Status = gBS->LocateProtocol (
&gEfiSmmBaseProtocolGuid, // IN EFI_GUID Published unique identifier of requested protocol GUID to locate
NULL, // IN VOID* Published unique identifier of requested protocol GUID
&SmmBase // OUT VOID** Returns address of pointer for SMM Base protocol interface
);
if (EFI_ERROR (Status)) {
ASSERT_EFI_ERROR (Status);
return Status; // Error detected while trying to locate SMM Base Protocol
}
// Save the SMM Base system table pointer
SmmBase->GetSmstLocation (SmmBase, &gSmst);
// Determine if we are in SMM or not
SmmBase->InSmm (SmmBase, &InSmm);
if (!InSmm) {
// Query image handle to see if it supports a requested protocol and then get an address of the protocol image to be loaded
Status = gBS->HandleProtocol (
ImageHandle, // Handle of requested protocol
&gEfiLoadedImageProtocolGuid, // Published unique identifier of requested protocol GUID
(VOID*)&LoadedImage // Returns address of pointer for requested protocol interface of the image
);
if (EFI_ERROR (Status)) {
ASSERT_EFI_ERROR (Status);
return Status; // Error detected while trying to query LoadImage protocol
}
// Query device handle of loaded image to see if it supports a requested protocol and then get an address of the prototocl device path
Status = gBS->HandleProtocol (
LoadedImage->DeviceHandle, // Handle of requested protocol
&gEfiDevicePathProtocolGuid, // Published unique identifier of requested protocol GUID
(VOID*) &ImageDevicePath // Returns address of pointer for requested protocol interface
);
if (EFI_ERROR (Status)) {
ASSERT_EFI_ERROR (Status);
return Status;
}
// Add this image's device path to the loaded image device path image and return
// a pointer to the new file path.
NewFilePath = AddDevicePath (
ImageDevicePath, // IN EFI_DEVICE_PATH_PROTOCOL*
LoadedImage->FilePath // IN EFI_DEVICE_PATH_PROTOCOL* Device Path Image to add
);
//Load the image in System Management RAM; it will automatically generate an SMI.
Status = SmmBase->Register (
SmmBase, // IN *This Addreess of pointer for SMM Base protocol interface)
NewFilePath, // IN EFI_DEVICE_PATH_PROTOCOL
NULL, // IN SourceBuffer OPTIONAL
0, // IN SourceSize OPTIONAL
&hEinj, // OUT *ImageHandle
FALSE // IN LegacyIA32Binary OPTIONAL
);
// Free up residual heap memory if not equal to NULL
if (NewFilePath) {
gBS->FreePool (NewFilePath);
}
if (EFI_ERROR (Status)) {
switch (EFIERR (Status))
{
case EFI_LOAD_ERROR:
break;
case EFI_INVALID_PARAMETER:
break;
case EFI_UNSUPPORTED:
break;
default:
;
}
return Status;
}
} else {
// We are in SMM...
// Allocate Memory for type Runtime Services Data - APEI Module Private Data
Status = gBS->AllocatePool (EfiRuntimeServicesData, sizeof (APEI_DRIVER_PRIVATE_DATA), &mApeiPrivData);
if (EFI_ERROR (Status)) {
return Status;
}
// Allocate Memory for type Runtime Services Data - APEI Interface
Status = gBS->AllocatePool (EfiRuntimeServicesData, sizeof (AMD_APEI_INTERFACE), &mApeiInterface);
if (EFI_ERROR (Status)) {
return Status;
}
// Locate SW SMM Dispatch Protocol
Status = gBS->LocateProtocol (
&gEfiSmmSwDispatchProtocolGuid, // IN EFI_GUID Published unique identifier of requested protocol GUID to locate
NULL, // IN VOID* Published unique identifier of requested protocol GUID
&SwDispatch // OUT VOID** Returns address of pointer for SMM Base protocol interface
);
if (EFI_ERROR (Status)) {
ASSERT_EFI_ERROR (Status);
return Status;
}
SwContext.SwSmiInputValue = EINJ_BEGIN_INJ_CMD;
// Register EINJ SMM callback handler.
Status = SwDispatch->Register (
SwDispatch, // IN *This
ApeiEinjSwSmiHandler, // IN EFI SW SMM Dispatcher Callback Entry Point Address
&SwContext, // IN SwContext
&SwHandle // IN OUT SwHandle
);
if (EFI_ERROR (Status)) {
ASSERT_EFI_ERROR (Status);
return Status;
}
SwContext.SwSmiInputValue = ERST_EXECUTE_OPERATION_CMD;
// Register ERST SMM callback handler.
Status = SwDispatch->Register (
SwDispatch,
ApeiErstSwSmiHandler,
&SwContext,
&SwHandle
);
if (EFI_ERROR (Status)) {
ASSERT_EFI_ERROR (Status);
return Status;
}
// Allocate Memory for the the AMD_RAS_APEI_PROTOCOL protocol.
Status = gBS->AllocatePool (
EfiBootServicesData, // IN EFI_MEMORY_TYPE PoolType
sizeof (AMD_RAS_APEI_PROTOCOL), // IN UINTN Size
&AmdRasApeiProtocol // OUT VOID **Buffer
);
if (EFI_ERROR (Status)) {
ASSERT_EFI_ERROR (Status);
return EFI_OUT_OF_RESOURCES; // Error detected while trying to locate SMM Base Protocol
}
EfiCommonLibZeroMem (AmdRasApeiProtocol, sizeof (AMD_RAS_APEI_PROTOCOL));
// Initialize BERT
ApeiBertInit ();
// Initialize HEST
ApeiHestInit ();
// Determine if we have ECC error enable bits set
Address64 = mCfgMmioBase | ((0x18 << 15) | (3 << 12) | 0x44); //F3:44 MC4_NB_CFG
Value32 = RasSmmReadMem32 (Address64);
if (Value32 & (1 << 22)) {
//Initialize EINJ if ECC is Enabled
ApeiEinjInit ();
}
// Initialize ERST
ApeiErstInit ();
AmdRasApeiProtocol->AmdApeiInterface = mApeiInterface;
mApeiInterface->ApeiPrivData = mApeiPrivData;
AmdRasApeiProtocol->AddBootErrorRecordEntry = 0;
AmdRasApeiProtocol->AddHestErrorSourceEntry = 0;
Status = gBS->InstallProtocolInterface (
&Handle, // IN OUT EFI_HANDLE
&gAmdRasApeiProtocolGuid, // IN EFI_GUID
EFI_NATIVE_INTERFACE, // IN EFI_INITERFACE_TYPE
AmdRasApeiProtocol // IN VOID* Interface
);
if (EFI_ERROR (Status)) {
ASSERT_EFI_ERROR (Status);
return EFI_PROTOCOL_ERROR; // Error detected while trying to locate SMM Base Protocol
}
} // End-- if(!InSmm)
//
// Do more non-SMM configuration
//
if (!InSmm) {
Status = gBS->LocateProtocol (
&gAmdRasApeiProtocolGuid,
NULL,
&AmdRasApeiProtocol
);
if (EFI_ERROR (Status)) {
ASSERT_EFI_ERROR (Status);
return EFI_PROTOCOL_ERROR; // Error detected while trying to locate SMM Base Protocol
}
mApeiInterface = AmdRasApeiProtocol->AmdApeiInterface;
mApeiPrivData = mApeiInterface->ApeiPrivData;
// Initialize function pointers to protocol interfaces
AmdRasApeiProtocol->AddBootErrorRecordEntry = &AddBertErrorRecord;
AmdRasApeiProtocol->AddHestErrorSourceEntry = &AddHestErrorRecord;
//
// Find the protocol that was installed during SMM phase and reinstall it during
// Non-SMM phase as well.
//
// Get the buffer size for the EFI_HANDLE
BufferSize = sizeof (EFI_HANDLE);
// Returns an array of handles that support a specified protocol.
Status = gBS->LocateHandle (
ByProtocol, // IN EFI_LOCATE_SEARCH_TYPE SearchType
&gAmdRasApeiProtocolGuid, // IN EFI_GUID *Protocol OPTIONAL
NULL, // IN VOID *SearchKey OPTIONAL
&BufferSize, // IN OUT UINTN BufferSize
&hNewHandle // OUT EFI_HANDLE *Buffer
);
if (EFI_ERROR (Status)) {
ASSERT_EFI_ERROR (Status);
return EFI_PROTOCOL_ERROR; // Error detected while trying to locate SMM Base Protocol
}
// Queries a handle to determine if it supports a specified protocol.
Status = gBS->HandleProtocol (
hNewHandle, // IN EFI_HANDLE Handle
&gAmdRasApeiProtocolGuid, // IN EFI_GUID *Protocol
(VOID **) &AmdRasApeiProtocol // OUT VOID *NewInterface
);
if (EFI_ERROR (Status)) {
ASSERT_EFI_ERROR (Status);
return EFI_PROTOCOL_ERROR; // Error detected while trying to locate SMM Base Protocol
}
// Local ACPI Protocol
Status = gBS->LocateProtocol (
&gAcpiSupportGuid,
NULL,
(VOID **) &AcpiSupportProtocol
);
if (EFI_ERROR (Status)) {
ASSERT_EFI_ERROR (Status);
return EFI_PROTOCOL_ERROR; // Error detected while trying to locate ACPI Support Protocol
}
//Add HEST table to the ACPI aware OS
Status = AcpiSupportProtocol->SetAcpiTable (
AcpiSupportProtocol, // IN EFI_ACPI_SUPPORT_PROTOCOL *This
mApeiInterface->ApeiPrivData->ApeiHestTbl, // IN VOID *Table OPTIONAL
TRUE, // IN BOOLEAN Checksum
EFI_ACPI_TABLE_VERSION_ALL, // IN EFI_ACPI_TABLE_VERSION Version
&HestTblHandle // IN OUT UINTN *TableHandle
);
ASSERT_EFI_ERROR (Status);
// Reinstalls a protocol interface on a device handle.
Status = gBS->ReinstallProtocolInterface (
hNewHandle, // IN EFI_HANDLE Handle
&gAmdRasApeiProtocolGuid, // IN EFI_GUID *Protocol
AmdRasApeiProtocol, // IN VOID *OldInterface
AmdRasApeiProtocol // IN VOID *NewInterface
);
if (EFI_ERROR (Status)) {
ASSERT_EFI_ERROR (Status);
return EFI_PROTOCOL_ERROR; // Error detected while trying to locate SMM Base Protocol
}
// Create a callback event to be executed at ReadyToBoot to publish APEI tables to OS.
Status = gBS->CreateEventEx (
EFI_EVENT_NOTIFY_SIGNAL,
EFI_TPL_NOTIFY,
AddApeiTables,
NULL,
&gEfiEventReadyToBootGuid,
&mEvtApeiReadyToBoot
);
if (EFI_ERROR (Status)) {
ASSERT_EFI_ERROR (Status);
return EFI_OUT_OF_RESOURCES; // Error detected while trying to locate SMM Base Protocol
}
}
return Status;
}
VOID
EFIAPI
FchD3ColdAcpiInstallNotify (
IN EFI_EVENT Event,
IN VOID *Context
)
{
UINTN Index;
INTN Instance;
UINTN Size;
UINTN NumberOfHandles;
UINTN TableHandle;
UINTN TableSize;
UINT32 FvStatus;
BOOLEAN HwReducedAcpi;
EFI_STATUS Status;
EFI_HANDLE *HandleBuffer;
EFI_FV_FILETYPE FileType;
EFI_FV_FILE_ATTRIBUTES Attributes;
EFI_ACPI_COMMON_HEADER *CurrentTable;
EFI_ACPI_DESCRIPTION_HEADER *FchD3ColdAcpiBlockPtr = NULL;
EFI_ACPI_TABLE_PROTOCOL *AcpiTableProtocol;
FCH_ACPI_PROTOCOL *FchAcpiProtocol;
FCH_INIT_PROTOCOL *FchInitProtocol;
EFI_FIRMWARE_VOLUME_PROTOCOL *FwVol = NULL;
EFI_ACPI_SUPPORT_PROTOCOL *AcpiSupport = NULL;
EFI_ACPI_DESCRIPTION_HEADER *Table;
EFI_ACPI_TABLE_VERSION Version;
EFI_ACPI_3_0_FIXED_ACPI_DESCRIPTION_TABLE *Fadt;
Status = gBS->LocateProtocol (
&gEfiAcpiTableProtocolGuid,
NULL,
&AcpiTableProtocol
);
if (EFI_ERROR (Status)) {
return;
}
Status = gBS->LocateProtocol (
&gFchAcpiProtocolGuid,
NULL,
&FchAcpiProtocol
);
if (EFI_ERROR (Status)) {
return;
}
Status = gBS->LocateProtocol (
&gFchInitProtocolGuid,
NULL,
&FchInitProtocol
);
if (EFI_ERROR (Status)) {
return;
}
HwReducedAcpi = FchInitProtocol->FchPolicy.Misc.FchCsSupport.FchCsHwReduced;
FvStatus = 0;
//
// Locate protocol.
//
Status = gBS->LocateHandleBuffer (
ByProtocol,
&gEfiFirmwareVolumeProtocolGuid,
NULL,
&NumberOfHandles,
&HandleBuffer
);
if (EFI_ERROR (Status)) {
return;
}
//
// Looking for FV with FCH ACPI Data Block file
//
for (Index = 0; Index < NumberOfHandles; Index++) {
//
// Get the protocol on this handle
// This should not fail because of LocateHandleBuffer
//
Status = gBS->HandleProtocol (
HandleBuffer[Index],
&gEfiFirmwareVolumeProtocolGuid,
(VOID**) &FwVol
);
ASSERT_EFI_ERROR (Status);
//
// See if it has the ACPI storage file
//
Size = 0;
FvStatus = 0;
Status = FwVol->ReadFile (
FwVol,
&gAmdFchD3ColdAcpiGuid,
NULL,
&Size,
&FileType,
&Attributes,
&FvStatus
);
//
// If we found it, then we are done
//
if (Status == EFI_SUCCESS) {
break;
}
}
//
// Read tables from the storage file.
//
Instance = 0;
CurrentTable = NULL;
while (Status == EFI_SUCCESS) {
Status = FwVol->ReadSection (
FwVol,
&gAmdFchD3ColdAcpiGuid,
EFI_SECTION_RAW,
Instance,
&CurrentTable,
&Size,
&FvStatus
);
if (!EFI_ERROR (Status)) {
//
// Check the table ID to modify the table
//
if (((EFI_ACPI_DESCRIPTION_HEADER*) CurrentTable)->OemTableId == EFI_SIGNATURE_64 ('F', 'C', 'H', 'C', 'S', 'D', '3', 0)) {
FchD3ColdAcpiBlockPtr = (EFI_ACPI_DESCRIPTION_HEADER*) CurrentTable;
Status = FchD3ColdUpdateAcpiTable (FchAcpiProtocol, &FchD3ColdAcpiBlockPtr);
TableHandle = 0;
TableSize = FchD3ColdAcpiBlockPtr->Length;
//
// Install ACPI table
//
Status = AcpiTableProtocol->InstallAcpiTable (
AcpiTableProtocol,
FchD3ColdAcpiBlockPtr,
TableSize,
&TableHandle
);
//
// Free memory allocated by ReadSection
//
gBS->FreePool (CurrentTable);
if (EFI_ERROR (Status)) {
return;
}
}
//
// Increment the instance
//
Instance++;
CurrentTable = NULL;
}
}
//
// Our exit status is determined by the success of the previous operations
// If the protocol was found, Instance already points to it.
//
//
// Free any allocated buffers
//
gBS->FreePool (HandleBuffer);
//set FACP
Status = gBS->LocateProtocol (
&gEfiAcpiSupportGuid,
NULL,
&AcpiSupport
);
if (EFI_ERROR (Status)) {
return;
}
// modify FADT to add HW_REDUCED_ACPI and LOW_POWER_S0_IDLE_CAPABLE flag
//
// Search FADT table
//
Index = 0;
TableHandle = 0;
do {
Table = NULL;
Status = AcpiSupport->GetAcpiTable (
AcpiSupport,
Index,
&Table,
&Version,
&TableHandle
);
if (EFI_ERROR (Status)) {
break;
}
//
// Check Signture and update FADT table
//
if ((Table->Signature == EFI_ACPI_3_0_FIXED_ACPI_DESCRIPTION_TABLE_SIGNATURE) && (Table->Revision == 0x05 )) {
Fadt = (EFI_ACPI_3_0_FIXED_ACPI_DESCRIPTION_TABLE *)Table;
Fadt->Flags |= LOW_POWER_S0_IDLE_CAPABLE;
if (HwReducedAcpi) {
Fadt->Flags |= HW_REDUCED_ACPI;
}
Status = AcpiSupport->SetAcpiTable (
AcpiSupport,
Table,
TRUE,
(EFI_ACPI_TABLE_VERSION_1_0B | EFI_ACPI_TABLE_VERSION_2_0 | EFI_ACPI_TABLE_VERSION_3_0 | EFI_ACPI_TABLE_VERSION_4_0 | EFI_ACPI_TABLE_VERSION_5_0),
&TableHandle
);
}
gBS->FreePool (Table);
Index++;
} while (TRUE);
}
EFI_STATUS
Main(
VOID
)
{
EFI_ACPI_SUPPORT_PROTOCOL *AcpiSupportProtocol;
EFI_LEGACY_BIOS_PROTOCOL *LegacyBiosProtocol;
UINT64 Handel = 0;
UINTN DataSize = 0;
EFI_TPL OldTpl;
EFI_STATUS Status = EFI_UNSUPPORTED;
Rsdp20Tbl_t *RsdpTable = 0;
Rsdp20Tbl_t *LegacyRsdpTable = 0;
RsdtTbl_t *RsdtTable = 0;
XsdtTbl_t *XsdtTable = 0;
SlicTbl_t *SlicTable = 0;
AcpiTbl_t *AcpiTable = 0;
VOID *LegacyAddress = 0;
UINT8 SlpString[0x20] = { 0 };
UINTN i = 0;
//=========================================================================//
// code starts //
//=========================================================================//
SlicTable = (SlicTbl_t *)SLIC;
//=========================================================================//
// add Marker and Public Key to empty SLIC //
//=========================================================================//
DataSize = sizeof(Marker_t);
if (RS->GetVariable(OaMarkerName, &OaMarkerGuid, 0, &DataSize, &SlicTable->Marker) != EFI_SUCCESS ||
DataSize != sizeof(Marker_t)) {
return EFI_NOT_FOUND;
}
DataSize = sizeof(PublicKey_t);
if (RS->GetVariable(OaPublicKeyName, &OaPublicKeyGuid, 0, &DataSize, &SlicTable->PublicKey) != EFI_SUCCESS ||
DataSize != sizeof(PublicKey_t)) {
return EFI_NOT_FOUND;
}
//=========================================================================//
// copy OemId, OemTableId from Marker to SLIC ACPI header //
//=========================================================================//
BS->CopyMem(SlicTable->Header.OemId, SlicTable->Marker.OemId, 6);
BS->CopyMem(SlicTable->Header.OemTableId, SlicTable->Marker.OemTableId, 8);
//=========================================================================//
// add SLIC to ACPI tables //
//=========================================================================//
if(BS->LocateProtocol(&AcpiProtocolGuid, NULL, (VOID **) &AcpiSupportProtocol) == EFI_SUCCESS) {
Status = AcpiSupportProtocol->SetAcpiTable(AcpiSupportProtocol, (VOID *)SLIC, TRUE,
EFI_ACPI_TABLE_VERSION_1_0B|EFI_ACPI_TABLE_VERSION_2_0|EFI_ACPI_TABLE_VERSION_3_0, &Handel);
}
if (Status != EFI_SUCCESS) {
return Status;
}
#if SLP_INJECT == 1
//=========================================================================//
// add SLP 1.0 string to legacy region //
//=========================================================================//
DataSize = sizeof(SlpString);
if (RS->GetVariable(OaSlpName, &OaSlpGuid, 0, &DataSize, SlpString) == EFI_SUCCESS) {
if (BS->LocateProtocol(&LegacyBiosGuid, NULL, (VOID **)&LegacyBiosProtocol) == EFI_SUCCESS) {
if (LegacyBiosProtocol->GetLegacyRegion(LegacyBiosProtocol, sizeof(SlpString), 1, 2, &LegacyAddress) == EFI_SUCCESS) {
Status = LegacyBiosProtocol->CopyLegacyRegion(LegacyBiosProtocol, DataSize, LegacyAddress, SlpString);
}
}
}
#endif
//=========================================================================//
// find ACPI tables //
//=========================================================================//
OldTpl = BS->RaiseTPL(TPL_HIGH_LEVEL);
Status = GetSystemConfigurationTable (&EfiAcpi20TableGuid, (VOID **)&RsdpTable);
if (EFI_ERROR (Status)) {
Status = GetSystemConfigurationTable (&EfiAcpiTableGuid, (VOID **)&RsdpTable);
}
if (Status == EFI_SUCCESS) {
if (RsdpTable->Revision == 0) {
RsdtTable = (RsdtTbl_t *) RsdpTable->RSDTAddress;
}
else if (RsdpTable->Revision == 2) {
RsdtTable = (RsdtTbl_t *) RsdpTable->RSDTAddress;
XsdtTable = (XsdtTbl_t *) RsdpTable->XSDTAddress;
}
else {
return EFI_UNSUPPORTED;
}
}
else {
return EFI_NOT_FOUND;
}
//=========================================================================//
// copy SLIC OemId, OemTableId to RSDP, RSDT, XSDT //
//=========================================================================//
#if PATCH_TABLES == 1
DataSize = (RsdtTable->Header.Length - sizeof(AcpiHeader_t)) << 2;
for(i = 0 ; i < DataSize; i++) {
AcpiTable = (AcpiTbl_t *) RsdtTable->Entry[i];
if (AcpiTable != NULL) {
if (CompareMem(AcpiTable->Header.OemId, RsdtTable->Header.OemId, 6) == 0 &&
CompareMem(AcpiTable->Header.OemTableId, RsdtTable->Header.OemTableId, 8) == 0) {
BS->CopyMem(AcpiTable->Header.OemId, SlicTable->Header.OemId, 6);
BS->CopyMem(AcpiTable->Header.OemTableId, SlicTable->Header.OemTableId, 8);
AcpiTable->Header.Checksum = 0;
AcpiTable->Header.Checksum = ComputeChecksum((UINT8 *) AcpiTable, AcpiTable->Header.Length);
}
}
}
#endif
BS->CopyMem(RsdtTable->Header.OemId, SlicTable->Header.OemId, 6);
BS->CopyMem(RsdtTable->Header.OemTableId, SlicTable->Header.OemTableId, 8);
RsdtTable->Header.Checksum = 0;
RsdtTable->Header.Checksum = ComputeChecksum((UINT8 *) RsdtTable, RsdtTable->Header.Length);
BS->CopyMem(RsdpTable->OemId, SlicTable->Header.OemId, 6);
RsdpTable->Checksum = 0;
RsdpTable->Checksum = ComputeChecksum((UINT8 *) RsdpTable, 0x14);
if(RsdpTable->Revision == 2) {
#if PATCH_TABLES == 1
DataSize = (XsdtTable->Header.Length - sizeof(AcpiHeader_t)) << 3;
for(i = 0 ; i < DataSize; i++) {
AcpiTable = (AcpiTbl_t *) (XsdtTable->Entry[i] & 0xFFFFFFFF);
if (AcpiTable != NULL) {
if (CompareMem(AcpiTable->Header.OemId, XsdtTable->Header.OemId, 6) == 0 &&
CompareMem(AcpiTable->Header.OemTableId, XsdtTable->Header.OemTableId, 8) == 0) {
BS->CopyMem(AcpiTable->Header.OemId, SlicTable->Header.OemId, 6);
BS->CopyMem(AcpiTable->Header.OemTableId, SlicTable->Header.OemTableId, 8);
AcpiTable->Header.Checksum = 0;
AcpiTable->Header.Checksum = ComputeChecksum((UINT8 *) AcpiTable, AcpiTable->Header.Length);
}
}
}
#endif
RsdpTable->ExtendedChecksum = 0;
RsdpTable->ExtendedChecksum = ComputeChecksum((UINT8 *) RsdpTable, RsdpTable->Length);
BS->CopyMem(XsdtTable->Header.OemId, SlicTable->Header.OemId, 6);
BS->CopyMem(XsdtTable->Header.OemTableId, SlicTable->Header.OemTableId, 8);
XsdtTable->Header.Checksum = 0;
XsdtTable->Header.Checksum = ComputeChecksum((UINT8 *) XsdtTable, XsdtTable->Header.Length);
}
//=========================================================================//
// copy OemId to RSDP in legacy region //
//=========================================================================//
LegacyRsdpTable = (Rsdp20Tbl_t *) FindAcpiRsdPtr();
if (LegacyRsdpTable != NULL && LegacyUnlock() == EFI_SUCCESS)
{
BS->CopyMem(LegacyRsdpTable->OemId, SlicTable->Header.OemId, 6);
LegacyRsdpTable->RSDTAddress = RsdpTable->RSDTAddress;
LegacyRsdpTable->Checksum = 0;
LegacyRsdpTable->Checksum = ComputeChecksum((UINT8 *) LegacyRsdpTable, 0x14);
if(LegacyRsdpTable->Revision == 2) {
LegacyRsdpTable->XSDTAddress = RsdpTable->XSDTAddress;
LegacyRsdpTable->ExtendedChecksum = 0;
LegacyRsdpTable->ExtendedChecksum = ComputeChecksum((UINT8 *) LegacyRsdpTable, LegacyRsdpTable->Length);
}
LegacyLock();
}
BS->RestoreTPL(OldTpl);
return Status;
}