void efail()
{
byte thisByte = 0;
int loopCount = 0;
eth_client.println(F("QUIT"));
while(!eth_client.available()) {
#ifdef WATCHDOG
wdt_reset();
#endif
delay(1);
loopCount++;
// if nothing received for 10 seconds, timeout
if(loopCount > 10000) {
eth_client.stop();
Serial.println(F("\r\nTimeout"));
return;
}
}
while(eth_client.available())
{
thisByte = eth_client.read();
Serial.write(thisByte);
}
eth_client.stop();
Serial.println(F("disconnected"));
}
void Nimbits::recordValue(double value, String pointId) {
EthernetClient client;
String json;
json = "{\"d\":\"";
json += floatToString(value, 4);
json += "\"}";
String content;
content += "&json=";
content += json;
content += "&id=";
content += pointId;
if (client.connect(_hostname.c_str(), _port)) {
doPost(client, VALUE_API, content);
String response = getFullResponse(client);
client.stop();
}
else {
client.stop();
}
}
String Nimbits::login(String email, String password) {
EthernetClient client;
_email = email;
_password = password;
String content;
content = "email=";
content += email;
content += "&token=";
content += _password;
if (client.connect(_hostname.c_str(), _port)) {
doPost(client, SESSION_API, content);
String response = getFullResponse(client);
String str = getContent(response);
Serial.println(str);
client.stop();
int str_len = str.length() + 1;
StaticJsonBuffer<1024> jsonBuffer;
char char_array[str_len];
// Copy it over
str.toCharArray(char_array, str_len);
JsonObject& root = jsonBuffer.parseObject(char_array);
if (!root.success()) {
_authToken = "";
return "";
}
_authToken = root["token"];
}
else {
client.stop();
}
return _authToken;
}
double Nimbits::getValue(String point) {
EthernetClient client;
String content;
content += "&id=";
content += (_email + "/" + point);
if (client.connect(_hostname.c_str(), _port)) {
doGet(client, VALUE_API, content);
String response = getFullResponse(client);
String str = getContent(response);
client.stop();
int str_len = str.length() + 1;
StaticJsonBuffer<256> jsonBuffer;
char char_array[str_len];
// Copy it over
str.toCharArray(char_array, str_len);
JsonObject& root = jsonBuffer.parseObject(char_array);
if (!root.success()) {
return -1.0;
}
double d = root["d"];
return d;
}
else {
client.stop();
return 0;
}
}
String GAE(String link) {
httpRequest(link);
delay(10000);
String readString = ""; //Reset string
while (client.available() > 0) {
char s = client.read();
//Serial.print(s); //Complete response w/ headers. For dev mode.
if (s== '\n') {
char c = client.read();
//Serial.print(c); //Parsed response. For dev mode.
if (c == '\r') {
while (client.connected()) {
char z = client.read();
readString += z;
}
}
}
}
client.stop();
return(readString);
}
void loop() {
// listen for incoming clients
EthernetClient client = server.available();
// we get a request
if (client) {
Serial.println(F("Client connected"));
// an http request ends with a blank line
boolean done = false;
while (client.connected() && !done) {
while (client.available () > 0 && !done) {
done = processIncomingByte (client.read ());
}
} // end of while client connected
// get ROV status values as json string
String rovStatus = getRovStatus();
// send a standard http response header
client.println(F("HTTP/1.1 200 OK"));
client.println(F("Content-Type: text/json"));
client.println(F("Connection: close")); // close after completion of the response
client.println(); // end of HTTP header
client.println(rovStatus);
// give the web browser time to receive the data
delay(10);
// close the connection:
client.stop();
Serial.println(F("Client disconnected"));
} // end of got a new client
} // end of loop
void Nimbits::createPoint(String pointName)
{
EthernetClient client;
if (client.connect(GOOGLE, PORT))
{
client.println(F("POST /service/point HTTP/1.1"));
String content;
// writeAuthParams(content);
content += "email=";
content += _ownerEmail;
if (_accessKey.length() > 0)
{
content += ("&key=");
content += (_accessKey);
}
content += "&action=create&point=";
content += (pointName);
client.println(F("Host:nimbits1.appspot.com"));
client.println(F("Connection:close"));
client.println(F("Cache-Control:max-age=0"));
client.print(F("Content-Type: application/x-www-form-urlencoded\n"));
client.print(F("Content-Length: "));
client.print(content.length());
client.print(F("\n\n"));
client.print(content);
while (client.connected() && !client.available())
{
delay(1); //waits for data
}
client.stop();
client.flush();
}
}
void loop() {
// listen for incoming clients
EthernetClient client = server.available();
if (client)
{
Serial.println("new client");
// an http request ends with a blank line
boolean currentLineIsBlank = true;
while (client.connected())
{
if (client.available())
{
char c = client.read();
Serial.write(c);
//*******************233333333333333333333333333333333333333333333*******
// if you've gotten to the end of the line (received a newline
// character) and the line is blank, the http request has ended,
// so you can send a reply
if (c == '\n' && currentLineIsBlank)
{
// send a standard http response header
client.println("HTTP/1.1 200 OK");
client.println("Content-Type: textml");
client.println("Connection: close"); // the connection will be closed after completion of the response
client.println("Refresh: 5"); // refresh the page automatically every 5 sec
client.println();
client.println("<!DOCTYPE HTML>");
client.println("<html>");
// output the value of each analog input pin
for (int analogChannel = 0; analogChannel < 6; analogChannel++) {
int sensorReading = analogRead(analogChannel);
client.print("analog input ");
client.print(analogChannel);
client.print(" is ");
client.print(sensorReading);
client.println("<br />");
}
client.println("<ml>");
break;
}
if (c == '\n')
{
// you're starting a new line
currentLineIsBlank = true;
}
else if (c != '\r')
{
// you've gotten a character on the current line
currentLineIsBlank = false;
}
}
}
// give the web browser time to receive the data
delay(1);
// close the connection:
client.stop();
Serial.println("client disconnected");
}
}
void DataServeriOS::loop()
{
_client = _server->available();
if (_client)
{
WaitForRequest();
ParseReceivedRequest();
PerformRequestedCommand();
_client.flush();
_client.stop();
}
else {
_client.stop();
_substitudeLoop();
}
}
// this method makes a HTTP connection to the server:
void sendData(String thisData) {
// if there's a successful connection:
if (client.connect(server, 80)) {
Serial.println("connecting...");
// send the HTTP PUT request:
client.print("PUT /v2/feeds/");
client.print(FEEDID);
client.println(".csv HTTP/1.1");
client.println("Host: api.xively.com");
client.print("X-ApiKey: ");
client.println(APIKEY);
client.print("User-Agent: ");
client.println(USERAGENT);
client.print("Content-Length: ");
client.println(thisData.length());
// last pieces of the HTTP PUT request:
client.println("Content-Type: text/csv");
client.println("Connection: close");
client.println();
// here's the actual content of the PUT request:
client.println(thisData);
}
else {
// if you couldn't make a connection:
Serial.println("connection failed");
Serial.println();
Serial.println("disconnecting.");
client.stop();
}
// note the time that the connection was made or attempted:
lastConnectionTime = millis();
}
void getData(char *dst)
{
Serial.println("Trying to grab data from server:");
// from the server, read them and print them:
int i = 0;
while (!client.available());
while (client.available()) {
char c = client.read();
Serial.print(c);
if (i < 10)
{
dst[i] = c;
//dst[i+1] = 0;
}
i++;
}
// if the server's disconnected, stop the client:
if (!client.connected()) {
Serial.println();
Serial.println("disconnecting.");
client.stop();
// do nothing forevermore:
while(true);
}
}
void loop() {
// if there's incoming data from the net connection.
// send it out the serial port. This is for debugging
// purposes only:
if (client.available()) {
char c = client.read();
Serial.print(c);
}
// if there's no net connection, but there was one last time
// through the loop, then stop the client:
if (!client.connected() && lastConnected) {
Serial.println();
Serial.println("disconnecting.");
client.stop();
}
// if you're not connected, and ten seconds have passed since
// your last connection, then connect again and send data:
if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) {
httpRequest();
}
// store the state of the connection for next time through
// the loop:
lastConnected = client.connected();
}
/*
* Sends an HTTP POST request containing the name and the code to the server.
*/
void sendData() {
Serial.print("attempting to send data (name = ");
Serial.print(nameBuf);
Serial.print(", code = ");
Serial.print(buffer);
Serial.println(")");
// if you get a connection, report back via serial:
if (client.connect(server, port)) {
Serial.println("connected");
// Make a HTTP request:
client.print("POST /barcode");
client.print("?name=");
client.print(nameBuf);
client.print("&code=");
client.print(buffer);
client.print("&uptime=");
client.print(millis());
client.println(" HTTP/1.0");
client.println();
client.flush();
client.stop();
Serial.println("request sent");
}
else {
// if you didn't get a connection to the server:
Serial.println("connection failed");
}
}
void loop() {
client = server.available();
if (client) {
while (client.connected()) {
if (client.available()) {
if (client.find("GET /")) {
//INICIAR CRONOMETRAGEM
if (client.find("setCron=")) {
int charReaded = client.read();
if(charReaded == 49){
iniciarCronometragem();
}
}
//RETORNA O TEMPO DESDE O INICIO
if (client.find("getCron=")) {
int charReaded = client.read();
if(charReaded == 49){
getCronometragem();
}
}
}
}
Serial.println();
break;
}
client.println(" HTTP/1.1 200 OK ");
}
// give the web browser time to receive the data
delay(1);
client.stop();
}
//builds the url for the api request, connects to the server, and sends the request
boolean serverRequest() {
//Serial.print(server);
//Serial.println(page);
client.stop();
Serial.println("connecting...");
if (client.connect(server, 80)) {
Serial.println("connected");
client.print("GET /makermanager/index.php?r=api/toolValidate&badge=");
client.print(rfid_long);
client.print("&tool=1");
client.println(" HTTP/1.1");
client.print("Host: ");
client.println(server);
client.println("User-Agent: arduino-ethernet");
client.println("Connection: close");
client.println("");
//Serial.println(cmd);
//client.println(cmd);
return true;
}
else {
Serial.println("connection failed");
return false;
}
}
void loopServer() {
EthernetClient client = server.available();
if (client) {
while (client.connected()) {
if (client.available()) {
char c = client.read();
//read char by char HTTP request
if (readString.length() < 100) {
//store characters to string
readString += c;
//Serial.print(c);
}
//if HTTP request has ended
if (c == '\n') {
///////////////
Serial.print(readString); //print to serial monitor for debuging
//now output HTML data header
client.println(F("HTTP/1.1 200 OK")); //send new page on browser request
client.println(F("Content-Type: text/html"));
client.println();
client.println(F("Ok"));
delay(1);
//stopping client
client.stop();
if (readString.indexOf("R1=1") > 0){
soldoRelays[0]->On();
// Serial.println(">>>>>>>>>>>>");
// Serial.println("R1=1");
}
if (readString.indexOf("R2=1") > 0){
soldoRelays[1]->On();
// Serial.println(">>>>>>>>>>>>");
// Serial.println("R2=1");
}
if (readString.indexOf("R1=0") > 0){
soldoRelays[0]->Off();
// Serial.println(">>>>>>>>>>>>");
// Serial.println("R1=0");
}
if (readString.indexOf("R2=0") > 0){
soldoRelays[1]->Off();
// Serial.println(">>>>>>>>>>>>");
// Serial.println("R2=0");
}
readString="";
}
}
}
}
}
void ProcessClientMessage(){
// listen for incoming clients
EthernetClient client = GetAvailableClient();
if (client)
{
// an http request ends with a blank line
boolean currentLineIsBlank = true;
while (client.connected())
{
if (client.available())
{
char c = client.read();
// if you've gotten to the end of the line (received a newline
// character) and the line is blank, the http request has ended,
// so you can send a reply
if (c == '\n' && currentLineIsBlank)
{
//Magnetic;Noise;Temperature;Vibration;Voltage
String data = "";
data += String(GetMagnetic());
data += ";";
data += String(GetTemperature());
data += ";";
data += String(GetVibration());
data += ";";
data += String(GetVoltage());
client.println(data);
break;
}
if (c == '\n') {
// you're starting a new line
currentLineIsBlank = true;
}
else if (c != '\r')
{
// you've gotten a character on the current line
currentLineIsBlank = false;
}
}
}
// give the web browser time to receive the data
delay(10);
// close the connection:
client.stop();
}
}
void LeweiTcpClient::listenServer()
{
EthernetClient clientWeb = server.available();
if (clientWeb) {
//Serial.println("new clientWeb");
// an http request ends with a blank line
boolean currentLineIsBlank = true;
String clientStr = "";
while (clientWeb.connected()) {
if (clientWeb.available()) {
char c = clientWeb.read();
clientStr += c;
//Serial.write(c);
// if you've gotten to the end of the line (received a newline
// character) and the line is blank, the http request has ended,
// so you can send a reply
if (c == '\n' && currentLineIsBlank) {
clientWeb.println("<html><body><form method='get'>");
clientWeb.print("KEY<input type='text' name='a' value='");
clientWeb.print(_userKey);
clientWeb.print("'>GW<input type='text' name='g' value='");
clientWeb.print(_gatewayNo);
clientWeb.println("'><input type='submit'>");
clientWeb.println("</form></body></html>");
break;
}
if (c == '\n') {
// you're starting a new line
currentLineIsBlank = true;
if(clientStr.indexOf(" /?a=")>0)
{
Serial.print(clientStr);
String userInfoStr = clientStr.substring(clientStr.indexOf(" /?a=")+5,clientStr.indexOf("&g="));
userInfoStr += clientStr.substring(clientStr.indexOf("&g=")+3,clientStr.indexOf(" HTTP/1.1"));
if(userInfoStr.length()>33)writeRom(userInfoStr);
Serial.println(userInfoStr);
}
//Serial.println(clientStr);
clientStr = "";
//checkFreeMem();
}
else if (c != '\r') {
// you've gotten a character on the current line
currentLineIsBlank = false;
}
}
}
// give the web browser time to receive the data
delay(1);
// close the connection:
clientWeb.stop();
clientWeb= NULL;
//Serial.println("clientWeb disonnected");
}
}
uint8_t EC_Error(void)
{
#ifndef USE_RS485
ec_client.stop();
#endif
// add the two error code to the param_readings
//sprintf(¶m_readings[strlen(param_readings)], ",%u,%u", ec_state, mb_state);
sprintf_P(¶m_readings[strlen(param_readings)], PSTR(",,")); // add blank values - avoid distorted plotting
return ec_state;
}
void disconnect_pachube(){
Serial.println("disconnecting.\n=====\n\n");
localClient.stop();
ready_to_update = false;
reading_pachube = false;
request_pause = true;
last_connect = minute();
found_content = false;
resetEthernetShield();
}
/*
* Read client response from an HTTP request into a buffer. Return the number of
* characters written to buf (EXCLUDING null character);
*/
void
extract_client_response(struct HTTPObject *h, EthernetClient client){
extract_status_code(h, client);
skip_http_headers(client);
extract_body(h, client);
// Clean up the connection
client.flush();
client.stop();
}
//---------------------------------------------------------------------
void terminateConnection()
{
// flush input buffer
while ( client_.read() != (-1) )
delay( STREAM_DELAY_MS );
client_.stop();
#ifdef DEBUG_SERIAL
Serial.println( "DEBUG: client disconnected" );
#endif
digitalWrite( PIN_STATUS_LED, LOW );
}
// This method makes an HTTP connection to the server
void httpRequest(String link) {
//if there is a successful connection
if (client.connect(server, 80)) {
client.println("Get " + link + " HTTP/1.0 ");
client.println();
} else {
// You couldn't make the connection
Serial.println("Connection Failed");
Serial.println("Disconnecting.");
}
client.stop(); }
void mqttConnect() {
internetClient.stop(); // Ensure any old connection is closed
mqtt_response = mqttClient.connect();
// DebugSerial.println(F("MQTT connecting"));
if (mqtt_response == 0) {
// DebugSerial.println(F("MQTT connected"));
publish(F("mqttConnection"), 0);
} else {
DebugSerial.print(F("MQTT connection Failed: "));
DebugSerial.println(mqttClient.connectErrorString(mqtt_response));
}
}
Weather::ReturnVals Weather::GetVals(const char * key, uint32_t zip, const char * pws, bool usePws) const
{
ReturnVals vals = {0};
EthernetClient client;
if (client.connect(m_wundergroundAPIHost, 80))
{
char getstring[255];
trace(F("Connected\n"));
if (usePws)
snprintf(getstring, sizeof(getstring), "GET http://%s/api/%s/yesterday/conditions/q/pws:%s.json HTTP/1.1\r\n",m_wundergroundAPIHost, key, pws);
else
snprintf(getstring, sizeof(getstring), "GET http://%s/api/%s/yesterday/conditions/q/%ld.json HTTP/1.1\r\n",m_wundergroundAPIHost, key, (long) zip);
//trace("GetString:%s\n",getstring);
client.write((uint8_t*) getstring, strlen(getstring));
//send host header
snprintf(getstring, sizeof(getstring), "Host: %s\r\nConnection: close\r\n\r\n",m_wundergroundAPIHost);
//trace("GetString:%s\n",getstring);
client.write((uint8_t*) getstring, strlen(getstring));
ParseResponse(client, &vals);
vals.resolvedIP=client.GetIpAddress();
client.stop();
if (!vals.valid)
{
if (vals.keynotfound)
trace("Invalid WUnderground Key\n");
else
trace("Bad WUnderground Response\n");
}
}
else
{
trace(F("connection failed\n"));
client.stop();
}
return vals;
}
void api_call_http_register_self(byte amsg_server[]) {
char path[ 30 ];
char host[ 30 ];
strcpy_P(path, msg_server_path);
strcpy_P(host, msg_server_host);
EthernetClient client;
Serial.print("HTTP opening connection to ");
Serial.println(host);
/*
if (!ether.dnsLookup(website))
Serial.println("DNS failed");
else
Serial.println("DNS resolution done");
ether.printIp("SRV IP:\t", ether.hisip);
*/
if (!client.connect(amsg_server, pgm_read_word(&msg_server_port))) {
Serial.println("HTTP failed");
return;
}
char d;
String netbuf = "GET ";
netbuf += path;
netbuf += " HTTP/1.0\nHost: ";
netbuf += host;
netbuf += "\nConnection: close\n\n\n";
Serial.print("HTTP connected to ... ");
char sockbuf[ netbuf.length() ];
netbuf.toCharArray(sockbuf, netbuf.length());
client.write(sockbuf);
delay(100);
while(client.connected()) {
while(client.available()) {
d = client.read();
if (d == '\n')
Serial.print("\r\n");
else
Serial.print(d);
}
}
client.stop();
Serial.println();
}
void loop(){
if (dataLesen()==1) {
//QFF-Berechnung
x = ((temp + konst1)/(qfe/100)*exp(((temp+konst1+konst2)*11.5526-26821)/(temp+konst1+konst2-1060)));
qff = (qfe/100)*exp(konst2*10.5152/(x+temp+konst1+konst2));
//Messwerten abschicken
if (client.connect(serverName, 80)) {
//Serial.println("Verbunden ... sende ... fertig!");
// URL anrufen:
client.print("GET /upload.php?TEMP=");
client.print(temp);
client.print("&TAU=");
client.print(taupunkt);
client.print("&QFE=");
client.print(qfe/100, 1);
client.print("&QFF=");
client.print(qff,1);
client.print("&FEUCHTE=");
client.print(feuchte);
client.println("&key=root HTTP/1.0\n");
client.println("Host: localhost");
client.println("User-Agent: Arduino");
client.println();
client.stop();
}
if (!client.connected()) {
/*Serial.println();
Serial.println("disconnecting.");*/
client.stop();
}
delay(899500);
softReset();
/* else {
// 2. Worst-Case-Szenario
Serial.println("connection failed");
}*/
}
}
void setup_data_stream(){
// setup push socket
Serial.println(F("Setting up PUSH socket..."));
if( ZMQPush.connect( data_server, mes_port ) ){
Serial.println(F("oops"));
client.stop(); // TODO: deal with this better
frontpanel_set_led( ERR4_LED, 1 );
for(;;)
;
}
Serial.println(F("Starting"));
Serial.println(F("Data"));
Serial.println(F("Stream"));
}
void register_stream(){
// setup request socket
Serial.println(F("Setting up REQ socket"));
ZMQSocket ZMQReq( client, zmq_buffer, REQ );
int16_t len;
do{
uint8_t err = 0;
len = -1;
if( ZMQReq.connect( data_server, reg_port ) ){
client.stop(); // TODO: deal with this better
Serial.println("Cant connect to server");
err = 1;
}
if(!err){
// register datastream with server
Serial.println(F("Registering data stream..."));
len = packet.registerIntStream();
ZMQReq.sendZMQMsg(len);
len = ZMQReq.recv();
if( len < 0 ){
Serial.println(F("negative len returned"));
client.stop();
}
}
} while( len < 0 );
// check that we got the expected response from the moitoring server
if( len != 7 ){
Serial.println(F("Invalid Response from server, length: "));
Serial.println(len);
frontpanel_set_led( ERR4_LED, 1 );
for(;;)
;
}
// disconnect from registering port
Serial.println(F("Disconnecting REQ socket..."));
client.stop();
}
void ModbusIP::task() {
EthernetClient client = _server.available();
if (client) {
if (client.connected()) {
int i = 0;
while (client.available()){
_MBAP[i] = client.read();
i++;
if (i==7) break; //MBAP length has 7 bytes size
}
_len = _MBAP[4] << 8 | _MBAP[5];
_len--; // Do not count with last byte from MBAP
if (_MBAP[2] !=0 || _MBAP[3] !=0) return; //Not a MODBUSIP packet
if (_len > MODBUSIP_MAXFRAME) return; //Length is over MODBUSIP_MAXFRAME
_frame = (byte*) malloc(_len);
i = 0;
while (client.available()){
_frame[i] = client.read();
i++;
if (i==_len) break;
}
this->receivePDU(_frame);
if (_reply != MB_REPLY_OFF) {
//MBAP
_MBAP[4] = (_len+1) >> 8; //_len+1 for last byte from MBAP
_MBAP[5] = (_len+1) & 0x00FF;
byte sendbuffer[7 + _len];
for (i = 0 ; i < 7 ; i++) {
sendbuffer[i] = _MBAP[i];
}
//PDU Frame
for (i = 0 ; i < _len ; i++) {
sendbuffer[i+7] = _frame[i];
}
client.write(sendbuffer, _len + 7);
}
#ifndef TCP_KEEP_ALIVE
client.stop();
#endif
free(_frame);
_len = 0;
}