void DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::OnOkClick( wxCommandEvent& event )
/*******************************************************************/
/* Copy values in text control to the item parameters
*/
{
LAYER_NUM layer = m_LayerSelectionCtrl->GetLayerSelection();
if( IsCopperLayer( layer ) )
{
/* an edge is put on a copper layer: this it is very dangerous. a
* confirmation is requested */
if( !IsOK( NULL,
_( "The graphic item will be on a copper layer. This is very dangerous. Are you sure?" ) ) )
return;
}
m_parent->SaveCopyInUndoList( m_module, UR_MODEDIT );
m_module->SetLastEditTime();
wxString msg;
wxPoint coord;
msg = m_Center_StartXCtrl->GetValue();
coord.x = ValueFromString( g_UserUnit, msg );
msg = m_Center_StartYCtrl->GetValue();
coord.y = ValueFromString( g_UserUnit, msg );
m_item->SetStart( coord );
m_item->SetStart0( coord );
msg = m_EndX_Radius_Ctrl->GetValue();
coord.x = ValueFromString( g_UserUnit, msg );
msg = m_EndY_Ctrl->GetValue();
coord.y = ValueFromString( g_UserUnit, msg );
m_item->SetEnd( coord );
m_item->SetEnd0( coord );
msg = m_ThicknessCtrl->GetValue();
m_item->SetWidth( ValueFromString( g_UserUnit, msg ) );
msg = m_DefaultThicknessCtrl->GetValue();
int thickness = ValueFromString( g_UserUnit, msg );
m_brdSettings.m_ModuleSegmentWidth = thickness;
m_parent->SetDesignSettings( m_brdSettings );
m_item->SetLayer( layer );
if( m_item->GetShape() == S_ARC )
{
double angle;
m_Angle_Ctrl->GetValue().ToDouble( &angle );
NORMALIZE_ANGLE_360(angle);
m_item->SetAngle( angle );
}
m_parent->OnModify();
m_parent->SetMsgPanel( m_item );
Close( true );
}
bool DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::TransferDataFromWindow()
{
if( !DIALOG_GRAPHIC_ITEM_PROPERTIES_BASE::TransferDataFromWindow() )
return false;
LAYER_NUM layer = m_LayerSelectionCtrl->GetLayerSelection();
if( IsCopperLayer( layer ) )
{
/* an edge is put on a copper layer: this it is very dangerous. a
* confirmation is requested */
if( !IsOK( NULL,
_( "The graphic item will be on a copper layer. This is very dangerous. Are you sure?" ) ) )
return false;;
}
m_parent->SaveCopyInUndoList( m_module, UR_MODEDIT );
m_module->SetLastEditTime();
wxString msg;
wxPoint coord;
msg = m_Center_StartXCtrl->GetValue();
coord.x = ValueFromString( g_UserUnit, msg );
msg = m_Center_StartYCtrl->GetValue();
coord.y = ValueFromString( g_UserUnit, msg );
m_item->SetStart( coord );
m_item->SetStart0( coord );
msg = m_EndX_Radius_Ctrl->GetValue();
coord.x = ValueFromString( g_UserUnit, msg );
msg = m_EndY_Ctrl->GetValue();
coord.y = ValueFromString( g_UserUnit, msg );
m_item->SetEnd( coord );
m_item->SetEnd0( coord );
msg = m_ThicknessCtrl->GetValue();
m_item->SetWidth( ValueFromString( g_UserUnit, msg ) );
msg = m_DefaultThicknessCtrl->GetValue();
int thickness = ValueFromString( g_UserUnit, msg );
m_brdSettings.m_ModuleSegmentWidth = thickness;
m_parent->SetDesignSettings( m_brdSettings );
m_item->SetLayer( ToLAYER_ID( layer ) );
if( m_item->GetShape() == S_ARC )
{
m_item->SetAngle( m_AngleValue * 10.0 );
}
m_parent->OnModify();
m_parent->SetMsgPanel( m_item );
return true;
}
/*
* Show module property dialog.
*/
void PCB_EDIT_FRAME::InstallModuleOptionsFrame( MODULE* Module, wxDC* DC )
{
if( Module == NULL )
return;
#ifdef __WXMAC__
// avoid Avoid "writes" in the dialog, creates errors with WxOverlay and NSView & Modal
// Raising an Exception - Fixes #764678
DC = NULL;
#endif
DIALOG_MODULE_BOARD_EDITOR* dlg = new DIALOG_MODULE_BOARD_EDITOR( this, Module, DC );
int retvalue = dlg->ShowModal();
/* retvalue =
* FP_PRM_EDITOR_RETVALUE::PRM_EDITOR_ABORT if abort,
* FP_PRM_EDITOR_RETVALUE::PRM_EDITOR_WANT_EXCHANGE_FP if exchange module,
* FP_PRM_EDITOR_RETVALUE::PRM_EDITOR_EDIT_OK for normal edition
* FP_PRM_EDITOR_RETVALUE::PRM_EDITOR_WANT_MODEDIT for a goto editor command
*/
dlg->Destroy();
#ifdef __WXMAC__
// If something edited, push a refresh request
if( retvalue == DIALOG_MODULE_BOARD_EDITOR::PRM_EDITOR_EDIT_OK )
m_canvas->Refresh();
#endif
if( retvalue == DIALOG_MODULE_BOARD_EDITOR::PRM_EDITOR_WANT_MODEDIT )
{
FOOTPRINT_EDIT_FRAME* editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );
editor->Load_Module_From_BOARD( Module );
SetCurItem( NULL );
editor->Show( true );
editor->Raise(); // Iconize( false );
}
if( retvalue == DIALOG_MODULE_BOARD_EDITOR::PRM_EDITOR_WANT_EXCHANGE_FP )
{
InstallExchangeModuleFrame( Module );
// Warning: the current item can be deleted by exchange module
SetCurItem( NULL );
}
}
/*
* Show module property dialog.
*/
void PCB_EDIT_FRAME::InstallModuleOptionsFrame( MODULE* Module, wxDC* DC )
{
if( Module == NULL )
return;
#ifndef __WXMAC__
DIALOG_MODULE_BOARD_EDITOR* dialog = new DIALOG_MODULE_BOARD_EDITOR( this, Module, DC );
#else
// avoid Avoid "writes" in the dialog, creates errors with WxOverlay and NSView & Modal
// Raising an Exception - Fixes #764678
DIALOG_MODULE_BOARD_EDITOR* dialog = new DIALOG_MODULE_BOARD_EDITOR( this, Module, NULL );
#endif
int retvalue = dialog->ShowModal(); /* retvalue =
* -1 if abort,
* 0 if exchange module,
* 1 for normal edition
* and 2 for a goto editor command
*/
dialog->Destroy();
#ifdef __WXMAC__
// If something edited, push a refresh request
if (retvalue == 0 || retvalue == 1)
m_canvas->Refresh();
#endif
if( retvalue == 2 )
{
FOOTPRINT_EDIT_FRAME * editorFrame =
FOOTPRINT_EDIT_FRAME::GetActiveFootprintEditor();
if( editorFrame == NULL )
editorFrame = new FOOTPRINT_EDIT_FRAME( this );
editorFrame->Load_Module_From_BOARD( Module );
SetCurItem( NULL );
editorFrame->Show( true );
editorFrame->Iconize( false );
}
}
int EDIT_TOOL::editFootprintInFpEditor( const TOOL_EVENT& aEvent )
{
const SELECTION& selection = m_selectionTool->GetSelection();
bool unselect = selection.Empty();
if( !hoverSelection( selection ) )
return 0;
MODULE* mod = uniqueSelected<MODULE>();
if( !mod )
return 0;
PCB_BASE_EDIT_FRAME* editFrame = getEditFrame<PCB_BASE_EDIT_FRAME>();
editFrame-> SetCurItem( mod );
if( editFrame->GetCurItem()->GetTimeStamp() == 0 ) // Module Editor needs a non null timestamp
{
editFrame->GetCurItem()->SetTimeStamp( GetNewTimeStamp() );
editFrame->OnModify();
}
FOOTPRINT_EDIT_FRAME* editor = (FOOTPRINT_EDIT_FRAME*) editFrame->Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );
editor->Load_Module_From_BOARD( (MODULE*) editFrame->GetCurItem() );
editFrame->SetCurItem( NULL ); // the current module could be deleted by
editor->Show( true );
editor->Raise(); // Iconize( false );
if( unselect )
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
return 0;
}
/* Traces the outline of the search block structures
* The entire block follows the cursor
*/
static void DrawMovingBlockOutlines( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPosition,
bool aErase )
{
BASE_SCREEN* screen = aPanel->GetScreen();
FOOTPRINT_EDIT_FRAME* moduleEditFrame = FOOTPRINT_EDIT_FRAME::GetActiveFootprintEditor( aPanel->GetParent() );
wxASSERT( moduleEditFrame );
MODULE* currentModule = moduleEditFrame->GetBoard()->m_Modules;
BLOCK_SELECTOR* block = &screen->m_BlockLocate;
GRSetDrawMode( aDC, g_XorMode );
if( aErase )
{
block->Draw( aPanel, aDC, block->GetMoveVector(), g_XorMode, block->GetColor() );
if( currentModule )
{
wxPoint move_offset = -block->GetMoveVector();
BOARD_ITEM* item = currentModule->GraphicalItems();
for( ; item != NULL; item = item->Next() )
{
if( !item->IsSelected() )
continue;
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
case PCB_MODULE_EDGE_T:
item->Draw( aPanel, aDC, g_XorMode, move_offset );
break;
default:
break;
}
}
D_PAD* pad = currentModule->Pads();
for( ; pad != NULL; pad = pad->Next() )
{
if( !pad->IsSelected() )
continue;
pad->Draw( aPanel, aDC, g_XorMode, move_offset );
}
}
}
// Repaint new view.
block->SetMoveVector( moduleEditFrame->GetCrossHairPosition() - block->GetLastCursorPosition() );
block->Draw( aPanel, aDC, block->GetMoveVector(), g_XorMode, block->GetColor() );
if( currentModule )
{
BOARD_ITEM* item = currentModule->GraphicalItems();
wxPoint move_offset = - block->GetMoveVector();
for( ; item != NULL; item = item->Next() )
{
if( !item->IsSelected() )
continue;
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
case PCB_MODULE_EDGE_T:
item->Draw( aPanel, aDC, g_XorMode, move_offset );
break;
default:
break;
}
}
D_PAD* pad = currentModule->Pads();
for( ; pad != NULL; pad = pad->Next() )
{
if( !pad->IsSelected() )
continue;
pad->Draw( aPanel, aDC, g_XorMode, move_offset );
}
}
}
// Handles the selection of command events.
void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
LAYER_NUM itmp;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
MODULE* module;
m_canvas->CrossHairOff( &dc );
switch( id ) // Some (not all ) edit commands must be finished or aborted
{
case wxID_CUT:
case wxID_COPY:
case ID_PCB_USER_GRID_SETUP:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_AUX_TOOLBAR_PCB_SELECT_LAYER_PAIR:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_FLIP_TEXTEPCB:
case ID_POPUP_PCB_COPY_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_EDIT_MIRE:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
case ID_POPUP_PCB_EDIT_MODULE_PRMS:
case ID_POPUP_PCB_EDIT_MODULE_WITH_MODEDIT:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_PCB_BEGIN_TRACK:
case ID_POPUP_PCB_END_TRACK:
case ID_POPUP_PCB_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_PLACE_MICROVIA:
case ID_POPUP_PCB_SWITCH_TRACK_POSTURE:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
case ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER:
case ID_POPUP_PCB_FILL_ALL_ZONES:
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES:
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_CURRENT_ZONE:
case ID_POPUP_PCB_PLACE_ZONE_CORNER:
case ID_POPUP_PCB_PLACE_ZONE_OUTLINES:
case ID_POPUP_PCB_EDIT_ZONE_PARAMS:
case ID_POPUP_PCB_DELETE_ZONE:
case ID_POPUP_PCB_MOVE_ZONE_CORNER:
case ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT:
case ID_POPUP_PCB_MOVE_ZONE_OUTLINES:
case ID_POPUP_PCB_ADD_ZONE_CORNER:
case ID_POPUP_PCB_DELETE_TRACKSEG:
case ID_POPUP_PCB_DELETE_TRACK:
case ID_POPUP_PCB_DELETE_TRACKNET:
case ID_POPUP_PCB_FILL_ZONE:
case ID_POPUP_PCB_SELECT_LAYER:
case ID_POPUP_PCB_SELECT_CU_LAYER:
case ID_POPUP_PCB_SELECT_LAYER_PAIR:
case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
case ID_POPUP_PCB_MOVE_TRACK_NODE:
case ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST:
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT_KEEP_SLOPE:
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT:
case ID_POPUP_PCB_MOVE_TRACK_SEGMENT:
case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
case ID_POPUP_PCB_BREAK_TRACK:
case ID_POPUP_PCB_EDIT_NET:
case ID_POPUP_PCB_EDIT_TRACK:
case ID_POPUP_PCB_EDIT_TRACKSEG:
case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
case ID_POPUP_PCB_LOCK_ON_TRACK:
case ID_POPUP_PCB_LOCK_OFF_TRACK:
case ID_POPUP_PCB_LOCK_ON_NET:
case ID_POPUP_PCB_LOCK_OFF_NET:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_FLIP_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
case ID_POPUP_PCB_EDIT_DRAWING:
case ID_POPUP_PCB_GETINFO_MARKER:
case ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST:
case ID_POPUP_PCB_DRAG_MODULE_REQUEST:
case ID_POPUP_PCB_MOVE_MODULE_REQUEST:
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
case ID_POPUP_PCB_MOVE_MIRE_REQUEST:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( m_canvas->IsMouseCaptured() )
{
m_canvas->EndMouseCapture();
}
// Should not be executed, just in case
if( GetScreen()->m_BlockLocate.GetCommand() != BLOCK_IDLE )
{
GetScreen()->m_BlockLocate.SetCommand( BLOCK_IDLE );
GetScreen()->m_BlockLocate.SetState( STATE_NO_BLOCK );
GetScreen()->m_BlockLocate.ClearItemsList();
}
if( GetToolId() == ID_NO_TOOL_SELECTED )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
else
SetCursor( (wxStockCursor) m_canvas->GetDefaultCursor() );
break;
default: // Finish (abort) the command
if( m_canvas->IsMouseCaptured() )
m_canvas->CallEndMouseCapture( &dc );
if( GetToolId() != id )
{
if( m_lastDrawToolId != GetToolId() )
m_lastDrawToolId = GetToolId();
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
break;
}
switch( id ) // Execute command
{
case 0:
break;
case ID_OPEN_MODULE_EDITOR:
{
FOOTPRINT_EDIT_FRAME* editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, false );
if( !editor )
{
editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );
editor->Show( true );
editor->Zoom_Automatique( false );
}
else
{
/* not needed on linux, other platforms need this?
if( editor->IsIconized() )
editor->Iconize( false );
*/
editor->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != editor )
editor->SetFocus();
}
}
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME* viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );
if( !viewer )
{
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, true );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
/* not needed on linux, other platforms need this?
if( viewer->IsIconized() )
viewer->Iconize( false );
*/
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_PCB_GLOBAL_DELETE:
InstallPcbGlobalDeleteFrame( wxDefaultPosition );
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_FLIP_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_FLIP );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_DRC_CONTROL:
m_drc->ShowDialog();
break;
case ID_GET_NETLIST:
InstallNetlistFrame( &dc );
break;
case ID_FIND_ITEMS:
InstallFindFrame();
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_END_LINE:
m_canvas->MoveCursorToCrossHair();
// EndSegment(&dc);
break;
case ID_POPUP_PCB_EDIT_TRACK:
if( GetCurItem() == NULL )
break;
Edit_Track_Width( &dc, (TRACK*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
OnModify();
break;
case ID_POPUP_PCB_EDIT_TRACKSEG:
if( GetCurItem() == NULL )
break;
Edit_TrackSegm_Width( &dc, (TRACK*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
OnModify();
break;
case ID_POPUP_PCB_EDIT_ALL_VIAS_AND_TRACK_SIZE:
if( GetCurItem() == NULL )
break;
{
int type = GetCurItem()->Type();
if( type == PCB_TRACE_T || type == PCB_VIA_T )
{
BOARD_CONNECTED_ITEM*item = (BOARD_CONNECTED_ITEM*) GetCurItem();
DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS dlg( this, item->GetNetCode() );
dlg.ShowModal();
}
}
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_BEGIN_TRACK:
m_canvas->MoveCursorToCrossHair();
OnHotkeyBeginRoute( &dc );
break;
case ID_POPUP_PCB_END_TRACK:
m_canvas->MoveCursorToCrossHair();
End_Route( (TRACK*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem()->IsDragging() )
{
PlaceDraggedOrMovedTrackSegment( (TRACK*) GetCurItem(), &dc );
}
break;
case ID_POPUP_PCB_SWITCH_TRACK_POSTURE:
/* change the position of initial segment when creating new tracks
* switch from _/ to -\ .
* If a track is in progress, it will be redrawn
*/
if( m_canvas->IsMouseCaptured() )
m_canvas->CallMouseCapture( &dc, wxDefaultPosition, false );
g_Alternate_Track_Posture = !g_Alternate_Track_Posture;
if( m_canvas->IsMouseCaptured() )
m_canvas->CallMouseCapture( &dc, wxDefaultPosition, false );
break;
case ID_POPUP_PCB_PLACE_MICROVIA:
if( !IsMicroViaAcceptable() )
break;
// fall through
case ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem()->IsDragging() )
{
PlaceDraggedOrMovedTrackSegment( (TRACK*) GetCurItem(), &dc );
}
else
{
BOARD_DESIGN_SETTINGS &settings = GetDesignSettings();
VIATYPE_T v_type = settings.m_CurrentViaType;
switch( id )
{
case ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA:
settings.m_CurrentViaType = VIA_BLIND_BURIED;
break;
case ID_POPUP_PCB_PLACE_MICROVIA:
settings.m_CurrentViaType = VIA_MICROVIA;
break;
default:
settings.m_CurrentViaType = VIA_THROUGH;
break;
}
// place via and switch layer.
if( id == ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA ||
id == ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA )
{
m_canvas->SetIgnoreMouseEvents( true );
wxPoint dlgPosition;
wxGetMousePosition( &dlgPosition.x, &dlgPosition.y );
LAYER_NUM layer = SelectLayer( getActiveLayer(), ALL_NO_CU_LAYERS,
dlgPosition );
m_canvas->SetIgnoreMouseEvents( false );
m_canvas->MoveCursorToCrossHair();
if( getActiveLayer() != layer )
{
GetScreen()->m_Route_Layer_TOP = getActiveLayer();
GetScreen()->m_Route_Layer_BOTTOM = layer;
Other_Layer_Route( (TRACK*) GetCurItem(), &dc );
}
}
else
Other_Layer_Route( (TRACK*) GetCurItem(), &dc );
settings.m_CurrentViaType = v_type;
if( DisplayOpt.ContrastModeDisplay )
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_DELETE_TRACKSEG:
if( GetCurItem() == NULL )
break;
m_canvas->MoveCursorToCrossHair();
SetCurItem( Delete_Segment( &dc, (TRACK*) GetCurItem() ) );
OnModify();
break;
case ID_POPUP_PCB_DELETE_TRACK:
if( GetCurItem() == NULL )
break;
m_canvas->MoveCursorToCrossHair();
Delete_Track( &dc, (TRACK*) GetCurItem() );
SetCurItem( NULL );
OnModify();
break;
case ID_POPUP_PCB_DELETE_TRACKNET:
m_canvas->MoveCursorToCrossHair();
Delete_net( &dc, (TRACK*) GetCurItem() );
SetCurItem( NULL );
OnModify();
break;
case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
Attribut_Segment( (TRACK*) GetCurItem(), &dc, true );
break;
case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
Attribut_Segment( (TRACK*) GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_LOCK_ON_TRACK:
Attribut_Track( (TRACK*) GetCurItem(), &dc, true );
break;
case ID_POPUP_PCB_LOCK_OFF_TRACK:
Attribut_Track( (TRACK*) GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_LOCK_ON_NET:
Attribut_net( &dc, ( (TRACK*) GetCurItem() )->GetNetCode(), true );
break;
case ID_POPUP_PCB_LOCK_OFF_NET:
Attribut_net( &dc, ( (TRACK*) GetCurItem() )->GetNetCode(), false );
break;
case ID_POPUP_PCB_SETFLAGS_TRACK_MNU:
break;
case ID_POPUP_PCB_DELETE_ZONE:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() == NULL )
break;
{
SEGZONE* zsegm = (SEGZONE*) GetCurItem();
int netcode = zsegm->GetNetCode();
Delete_OldZone_Fill( zsegm );
SetCurItem( NULL );
TestNetConnection( NULL, netcode );
OnModify();
SetMsgPanel( GetBoard() );
}
break;
case ID_POPUP_PCB_EDIT_ZONE_PARAMS:
Edit_Zone_Params( &dc, (ZONE_CONTAINER*) GetCurItem() );
SetCurItem( NULL ); // Outlines can have changed
break;
case ID_POPUP_PCB_ZONE_DUPLICATE:
{
ZONE_CONTAINER* zone = (ZONE_CONTAINER*) GetCurItem();
duplicateZone( &dc, zone );
}
break;
case ID_POPUP_PCB_ZONE_ADD_SIMILAR_ZONE:
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
Add_Similar_Zone( &dc, (ZONE_CONTAINER*) GetCurItem() );
break;
case ID_POPUP_PCB_ZONE_ADD_CUTOUT_ZONE:
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
Add_Zone_Cutout( &dc, (ZONE_CONTAINER*) GetCurItem() );
break;
case ID_POPUP_PCB_DELETE_ZONE_CONTAINER:
case ID_POPUP_PCB_DELETE_ZONE_CUTOUT:
m_canvas->MoveCursorToCrossHair();
{
int netcode = ( (ZONE_CONTAINER*) GetCurItem() )->GetNetCode();
Delete_Zone_Contour( &dc, (ZONE_CONTAINER*) GetCurItem() );
SetCurItem( NULL );
TestNetConnection( NULL, netcode );
SetMsgPanel( GetBoard() );
}
break;
case ID_POPUP_PCB_DELETE_ZONE_CORNER:
Remove_Zone_Corner( &dc, (ZONE_CONTAINER*) GetCurItem() );
SetCurItem( NULL );
break;
case ID_POPUP_PCB_MOVE_ZONE_CORNER:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Corner( &dc, zone_cont, zone_cont->GetSelectedCorner(), false );
break;
}
case ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Drag_Outline_Edge( &dc, zone_cont, zone_cont->GetSelectedCorner() );
break;
}
case ID_POPUP_PCB_MOVE_ZONE_OUTLINES:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Outlines( &dc, zone_cont );
break;
}
case ID_POPUP_PCB_ADD_ZONE_CORNER:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
wxPoint pos = GetCrossHairPosition();
/* add corner between zone_cont->m_CornerSelection
* and zone_cont->m_CornerSelection+1
* and start move the new corner
*/
zone_cont->Draw( m_canvas, &dc, GR_XOR );
zone_cont->Outline()->InsertCorner( zone_cont->GetSelectedCorner(), pos.x, pos.y );
zone_cont->SetSelectedCorner( zone_cont->GetSelectedCorner() + 1 );
zone_cont->Draw( m_canvas, &dc, GR_XOR );
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Corner( &dc, zone_cont, zone_cont->GetSelectedCorner(), true );
break;
}
case ID_POPUP_PCB_PLACE_ZONE_OUTLINES:
case ID_POPUP_PCB_PLACE_ZONE_CORNER:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
End_Move_Zone_Corner_Or_Outlines( &dc, zone_cont );
m_canvas->SetAutoPanRequest( false );
break;
}
case ID_POPUP_PCB_FILL_ALL_ZONES:
m_canvas->MoveCursorToCrossHair();
Fill_All_Zones( this );
m_canvas->Refresh();
SetMsgPanel( GetBoard() );
break;
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_CURRENT_ZONE:
if( ( GetCurItem() )->Type() == PCB_ZONE_AREA_T )
{
ZONE_CONTAINER* zone_container = (ZONE_CONTAINER*) GetCurItem();
zone_container->UnFill();
TestNetConnection( NULL, zone_container->GetNetCode() );
OnModify();
SetMsgPanel( GetBoard() );
m_canvas->Refresh();
}
SetCurItem( NULL );
break;
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES: // Remove all zones :
GetBoard()->m_Zone.DeleteAll(); // remove zone segments used to fill zones.
for( int ii = 0; ii < GetBoard()->GetAreaCount(); ii++ )
{
// Remove filled areas in zone
ZONE_CONTAINER* zone_container = GetBoard()->GetArea( ii );
zone_container->ClearFilledPolysList();
}
SetCurItem( NULL ); // CurItem might be deleted by this command, clear the pointer
TestConnections();
TestForActiveLinksInRatsnest( 0 ); // Recalculate the active ratsnest, i.e. the unconnected links
OnModify();
SetMsgPanel( GetBoard() );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_FILL_ZONE:
m_canvas->MoveCursorToCrossHair();
Fill_Zone( (ZONE_CONTAINER*) GetCurItem() );
TestNetConnection( NULL, ( (ZONE_CONTAINER*) GetCurItem() )->GetNetCode() );
SetMsgPanel( GetBoard() );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST:
StartMoveTextePcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->SetAutoPanRequest( true );
break;
case ID_POPUP_PCB_DRAG_MODULE_REQUEST:
case ID_POPUP_PCB_MOVE_MODULE_REQUEST:
if( GetCurItem() == NULL )
break;
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
SendMessageToEESCHEMA( module );
SetCrossHairPosition( module->GetPosition() );
m_canvas->MoveCursorToCrossHair();
StartMoveModule( module, &dc, id == ID_POPUP_PCB_DRAG_MODULE_REQUEST );
break;
case ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST: // get module by name and move it
SetCurItem( GetModuleByName() );
module = (MODULE*) GetCurItem();
if( module == NULL )
break;
if( module->IsLocked() )
{
wxString msg = wxString::Format(
_( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
SendMessageToEESCHEMA( module );
m_canvas->MoveCursorToCrossHair();
StartMoveModule( module, &dc, false );
break;
case ID_POPUP_PCB_DELETE_MODULE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
if( Delete_Module( (MODULE*) GetCurItem(), &dc, true ) )
{
SetCurItem( NULL );
}
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
// This is a simple rotation, no other editing in progress
if( !GetCurItem()->IsMoving() )
SaveCopyInUndoList( GetCurItem(), UR_CHANGED, ((MODULE*)GetCurItem())->GetPosition() );
Rotate_Module( &dc, (MODULE*) GetCurItem(), m_rotationAngle, true );
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
// This is a simple rotation, no other editing in progress
if( !GetCurItem()->IsMoving() )
SaveCopyInUndoList( GetCurItem(), UR_CHANGED, ((MODULE*)GetCurItem())->GetPosition() );
Rotate_Module( &dc, (MODULE*) GetCurItem(), -m_rotationAngle, true );
break;
case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
// This is a simple flip, no other editing in progress
if( !GetCurItem()->IsMoving() )
SaveCopyInUndoList( GetCurItem(), UR_FLIPPED, ((MODULE*)GetCurItem())->GetPosition() );
Change_Side_Module( (MODULE*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_EDIT_MODULE_PRMS:
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
InstallModuleOptionsFrame( (MODULE*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EDIT_MODULE_WITH_MODEDIT:
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
if( GetCurItem()->GetTimeStamp() == 0 ) // Module Editor needs a non null timestamp
{
GetCurItem()->SetTimeStamp( GetNewTimeStamp() );
OnModify();
}
{
FOOTPRINT_EDIT_FRAME* editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );
editor->Load_Module_From_BOARD( (MODULE*)GetCurItem() );
SetCurItem( NULL ); // the current module could be deleted by
editor->Show( true );
editor->Raise(); // Iconize( false );
}
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DRAG_PAD_REQUEST:
module = (MODULE*) GetCurItem()->GetParent();
if( !module || module->Type() != PCB_MODULE_T )
break;
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "The parent (%s) of the pad is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetCurItem(), &dc, true );
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
module = (MODULE*) GetCurItem()->GetParent();
if( !module || module->Type() != PCB_MODULE_T )
break;
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "The parent (%s) of the pad is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
SaveCopyInUndoList( GetCurItem()->GetParent(), UR_CHANGED );
Import_Pad_Settings( (D_PAD*) GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
DlgGlobalChange_PadSettings( (D_PAD*) GetCurItem(), true );
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetCurItem() );
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetCurItem()->GetParent(), UR_CHANGED );
DeletePad( (D_PAD*) GetCurItem() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( (TEXTE_MODULE*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_RESET_TEXT_SIZE:
ResetTextSize( GetCurItem(), &dc );
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( (TEXTE_MODULE*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( (TEXTE_MODULE*) GetCurItem(),
&dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
DeleteTextModule( (TEXTE_MODULE*) GetCurItem() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_SELECT_LAYER:
itmp = SelectLayer( getActiveLayer() );
if( itmp >= 0 )
{
// if user changed colors and we are in high contrast mode, then redraw
// because the PAD_SMD pads may change color.
if( DisplayOpt.ContrastModeDisplay && getActiveLayer() != itmp )
{
m_canvas->Refresh();
}
setActiveLayer( itmp );
}
m_canvas->MoveCursorToCrossHair();
break;
case ID_AUX_TOOLBAR_PCB_SELECT_LAYER_PAIR:
SelectCopperLayerPair();
break;
case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
itmp = SelectLayer( getActiveLayer(), ALL_CU_LAYERS );
if( itmp >= 0 )
setActiveLayer( itmp );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_SELECT_CU_LAYER:
itmp = SelectLayer( getActiveLayer(), ALL_NO_CU_LAYERS );
if( itmp >= 0 )
setActiveLayer( itmp );
break;
case ID_POPUP_PCB_SELECT_LAYER_PAIR:
SelectCopperLayerPair();
m_canvas->MoveCursorToCrossHair();
break;
case ID_TOOLBARH_PCB_SELECT_LAYER:
setActiveLayer( m_SelLayerBox->GetLayerSelection() );
if( DisplayOpt.ContrastModeDisplay )
m_canvas->Refresh( true );
break;
case ID_POPUP_PCB_EDIT_TEXTEPCB:
InstallTextPCBOptionsFrame( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
Rotate_Texte_Pcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_COPY_TEXTEPCB:
CreateTextePcb( &dc, (TEXTE_PCB*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
break;
case ID_POPUP_PCB_FLIP_TEXTEPCB:
FlipTextePcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTEPCB:
Delete_Texte_Pcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_MIRE_REQUEST:
BeginMoveTarget( (PCB_TARGET*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EDIT_MIRE:
ShowTargetOptionsDialog( (PCB_TARGET*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_MIRE:
m_canvas->MoveCursorToCrossHair();
DeleteTarget( (PCB_TARGET*) GetCurItem(), &dc );
SetCurItem( NULL );
break;
case ID_POPUP_PCB_DELETE_DIMENSION:
m_canvas->MoveCursorToCrossHair();
DeleteDimension( (DIMENSION*) GetCurItem(), &dc );
SetCurItem( NULL );
break;
case ID_POPUP_PCB_EDIT_DIMENSION:
ShowDimensionPropertyDialog( (DIMENSION*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST:
BeginMoveDimensionText( (DIMENSION*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_DELETE_DRAWING:
Delete_Segment_Edge( (DRAWSEGMENT*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_MARKER:
RemoveStruct( GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_GETINFO_MARKER:
if( GetCurItem() && GetCurItem()->Type() == PCB_MARKER_T )
( (MARKER_PCB*) GetCurItem() )->DisplayMarkerInfo( this );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_DRAWING_LAYER:
if( GetCurItem()->GetFlags() != 0 )
break;
Delete_Drawings_All_Layer( GetCurItem()->GetLayer() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
m_canvas->Refresh();
break;
case ID_POPUP_PCB_EDIT_DRAWING:
#ifndef USE_WX_OVERLAY
InstallGraphicItemPropertiesDialog( (DRAWSEGMENT*) GetCurItem(), &dc );
#else
// #1277772 - Draw into dialog converted in refresh request
InstallGraphicItemPropertiesDialog( (DRAWSEGMENT*) GetCurItem(), NULL );
m_canvas->Refresh();
#endif
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_DRAWING_REQUEST:
m_canvas->MoveCursorToCrossHair();
Start_Move_DrawItem( (DRAWSEGMENT*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() && (GetCurItem()->IsNew()) )
{
End_Edge( (DRAWSEGMENT*) GetCurItem(), &dc );
SetCurItem( NULL );
}
break;
case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() && (GetCurItem()->IsNew()) )
{
if( End_Zone( &dc ) )
SetCurItem( NULL );
}
m_canvas->SetAutoPanRequest( false );
break;
case ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() && (GetCurItem()->IsNew()) )
{
if( Delete_LastCreatedCorner( &dc ) == 0 ) // No more segment in outline,
SetCurItem( NULL );
}
break;
case ID_POPUP_PCB_MOVE_TRACK_SEGMENT:
m_canvas->MoveCursorToCrossHair();
StartMoveOneNodeOrSegment( (TRACK*) GetScreen()->GetCurItem(), &dc, id );
break;
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT:
case ID_POPUP_PCB_MOVE_TRACK_NODE:
m_canvas->MoveCursorToCrossHair();
StartMoveOneNodeOrSegment( (TRACK*) GetScreen()->GetCurItem(), &dc, id );
break;
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT_KEEP_SLOPE:
m_canvas->MoveCursorToCrossHair();
Start_DragTrackSegmentAndKeepSlope( (TRACK*) GetScreen()->GetCurItem(), &dc );
break;
case ID_POPUP_PCB_BREAK_TRACK:
m_canvas->MoveCursorToCrossHair();
{
TRACK* track = (TRACK*) GetScreen()->GetCurItem();
wxPoint pos = GetCrossHairPosition();
track->Draw( m_canvas, &dc, GR_XOR );
PICKED_ITEMS_LIST itemsListPicker;
TRACK* newtrack = GetBoard()->CreateLockPoint( pos, track, &itemsListPicker );
SaveCopyInUndoList( itemsListPicker, UR_UNSPECIFIED );
track->Draw( m_canvas, &dc, GR_XOR );
newtrack->Draw( m_canvas, &dc, GR_XOR );
// compute the new ratsnest, because connectivity could change
TestNetConnection( &dc, track->GetNetCode() );
}
break;
case ID_MENU_PCB_CLEAN:
Clean_Pcb();
break;
case ID_MENU_PCB_SWAP_LAYERS:
Swap_Layers( event );
break;
case ID_PCB_USER_GRID_SETUP:
InvokeDialogGrid();
break;
case ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC:
{
wxConfigBase* cfg = Pgm().CommonSettings();
cfg->Read( wxT( "module_doc_file" ), g_DocModulesFileName );
GetAssociatedDocument( this, g_DocModulesFileName, &Kiface().KifaceSearch() );
}
break;
case ID_MENU_ARCHIVE_NEW_MODULES:
ArchiveModulesOnBoard( true );
break;
case ID_MENU_ARCHIVE_ALL_MODULES:
ArchiveModulesOnBoard( false );
break;
case ID_GEN_IMPORT_DXF_FILE:
InvokeDXFDialogImport( this );
m_canvas->Refresh();
break;
default:
wxString msg;
msg.Printf( wxT( "PCB_EDIT_FRAME::Process_Special_Functions() unknown event id %d" ),
id );
DisplayError( this, msg );
break;
}
m_canvas->CrossHairOn( &dc );
m_canvas->SetIgnoreMouseEvents( false );
}
wxWindow* CreateWindow( wxWindow* aParent, int aClassId, KIWAY* aKiway, int aCtlBits = 0 )
{
switch( aClassId )
{
case FRAME_PCB:
{
PCB_EDIT_FRAME* frame = new PCB_EDIT_FRAME( aKiway, aParent );
frame->Zoom_Automatique( true );
#if defined(KICAD_SCRIPTING)
// give the scripting helpers access to our frame
ScriptingSetPcbEditFrame( frame );
#endif
if( Kiface().IsSingle() )
{
// only run this under single_top, not under a project manager.
CreateServer( frame, KICAD_PCB_PORT_SERVICE_NUMBER );
}
return frame;
}
break;
case FRAME_PCB_MODULE_EDITOR:
{
FOOTPRINT_EDIT_FRAME* frame = new FOOTPRINT_EDIT_FRAME( aKiway, aParent );
frame->Zoom_Automatique( true );
/* Read a default config file in case no project given on command line.
frame->LoadProjectFile( wxEmptyString, true );
*/
return frame;
}
break;
case FRAME_PCB_MODULE_VIEWER:
case FRAME_PCB_MODULE_VIEWER_MODAL:
{
FOOTPRINT_VIEWER_FRAME* frame = new FOOTPRINT_VIEWER_FRAME(
aKiway, aParent, FRAME_T( aClassId ) );
frame->Zoom_Automatique( true );
/* Read a default config file in case no project given on command line.
frame->LoadProjectFile( wxEmptyString, true );
*/
return frame;
}
break;
case FRAME_PCB_FOOTPRINT_WIZARD_MODAL:
{
FOOTPRINT_WIZARD_FRAME* frame = new FOOTPRINT_WIZARD_FRAME(
aKiway, aParent, FRAME_T( aClassId ) );
return frame;
}
break;
default:
;
}
return NULL;
}
