Example #1
0
void DirectShowGrabber::routeCrossbar() {
    HRESULT     hr;
    long        output           = -1;
    long        input            = -1;
    int         compositePort    = -1;
    int         videoDecoderPort = -1;
    long        related;
    long        pinType;    
    IAMCrossbar *xb;

    if( crossbar == NULL ) return;        

    xb = crossbar->getXBar();

    xb->get_IsRoutedTo(0, &input);
    debug_msg("DirectShowGrabber::routeCrossbar():  pin %d is routed to output pin 0\n", input);

    hr = xb->get_PinCounts(&output, &input);

    for( int i = 0; i < input; ++i ) {
        xb->get_CrossbarPinInfo(TRUE, i, &related, &pinType);
        if( pinType == PhysConn_Video_Composite ) {
            compositePort = i;            
            break;
        }
    }
    for( int i = 0; i < output; ++i ) {
       xb->get_CrossbarPinInfo(FALSE, i, &related, &pinType);
       if( pinType == PhysConn_Video_VideoDecoder ) {
           videoDecoderPort = i;           
           break;
       }
    }
    
    if( xb->CanRoute(videoDecoderPort, compositePort) == S_FALSE ) 
        debug_msg("DirectShowGrabber::routeCrossbar():  cannot route input pin %d to output pin %d\n", compositePort, videoDecoderPort);
    else {
        debug_msg("DirectShowGrabber::routeCrossbar() routing pin %d to pin %d\n", compositePort, videoDecoderPort);
        hr = xb->Route(videoDecoderPort, compositePort);
        //showErrorMessage(hr);
    }

    xb->get_IsRoutedTo(0, &input);
    debug_msg("DirectShowGrabber::routeCrossbar():  pin %d is now routed to output pin 0\n", input);
}
Example #2
0
/*****************************************************************************
 * FindCrossbarRoutes
 *****************************************************************************/
HRESULT FindCrossbarRoutes( vlc_object_t *p_this, access_sys_t *p_sys,
                            IPin *p_input_pin, LONG physicalType, int depth )
{
    HRESULT result = S_FALSE;

    IPin *p_output_pin;
    if( FAILED(p_input_pin->ConnectedTo(&p_output_pin)) ) return S_FALSE;

    // It is connected, so now find out if the filter supports IAMCrossbar
    PIN_INFO pinInfo;
    if( FAILED(p_output_pin->QueryPinInfo(&pinInfo)) ||
        PINDIR_OUTPUT != pinInfo.dir )
    {
        p_output_pin->Release ();
        return S_FALSE;
    }

    IAMCrossbar *pXbar = NULL;
    if( FAILED(pinInfo.pFilter->QueryInterface(IID_IAMCrossbar,
                                               (void **)&pXbar)) )
    {
        pinInfo.pFilter->Release();
        p_output_pin->Release ();
        return S_FALSE;
    }

    LONG inputPinCount, outputPinCount;
    if( FAILED(pXbar->get_PinCounts(&outputPinCount, &inputPinCount)) )
    {
        pXbar->Release();
        pinInfo.pFilter->Release();
        p_output_pin->Release ();
        return S_FALSE;
    }

    LONG inputPinIndexRelated, outputPinIndexRelated;
    LONG inputPinPhysicalType = 0, outputPinPhysicalType;
    LONG inputPinIndex = 0, outputPinIndex;
    if( FAILED(GetCrossbarIndexFromIPin( pXbar, &outputPinIndex,
                                         FALSE, p_output_pin )) ||
        FAILED(pXbar->get_CrossbarPinInfo( FALSE, outputPinIndex,
                                           &outputPinIndexRelated,
                                           &outputPinPhysicalType )) )
    {
        pXbar->Release();
        pinInfo.pFilter->Release();
        p_output_pin->Release ();
        return S_FALSE;
    }

    /*
    ** if physical type is 0, then use default/existing route to physical connector
    */
    if( physicalType == 0 )
    {
        /* use following as default connector type if we fail to find an existing route */
        physicalType = PhysConn_Video_Tuner;
        if( SUCCEEDED(pXbar->get_IsRoutedTo(outputPinIndex, &inputPinIndex)) )
        {

            if( SUCCEEDED( pXbar->get_CrossbarPinInfo( TRUE,  inputPinIndex,
                           &inputPinIndexRelated, &inputPinPhysicalType )) )
            {
                // remember connector type
                physicalType = inputPinPhysicalType;
 
                msg_Dbg( p_this, "found existing route for output %ld (type %s) to input %ld (type %s)",
                         outputPinIndex, GetPhysicalPinName( outputPinPhysicalType ),
                         inputPinIndex, GetPhysicalPinName( inputPinPhysicalType ) );
 
                // fall through to for loop, note 'inputPinIndex' is set to the pin we are looking for
                // hence, loop iteration should not wind back

            }
        }
        else {
            // reset to first pin for complete loop iteration
            inputPinIndex = 0;
        }
    }
 
    //
    // for all input pins
    //
    for( /* inputPinIndex has been set */ ; (S_OK != result) && (inputPinIndex < inputPinCount); ++inputPinIndex )
    {
        if( FAILED(pXbar->get_CrossbarPinInfo( TRUE,  inputPinIndex,
            &inputPinIndexRelated, &inputPinPhysicalType )) ) continue;

        // Is this pin matching required connector physical type?
        if( inputPinPhysicalType != physicalType ) continue;

        // Can we route it?
        if( FAILED(pXbar->CanRoute(outputPinIndex, inputPinIndex)) ) continue;
 
 
        IPin *pPin;
        if( FAILED(GetCrossbarIPinAtIndex( pXbar, inputPinIndex,
                                           TRUE, &pPin)) ) continue;

        result = FindCrossbarRoutes( p_this, p_sys, pPin,
                                     physicalType, depth+1 );

        if( S_OK == result || (S_FALSE == result &&
            physicalType == inputPinPhysicalType &&
            (p_sys->i_crossbar_route_depth = depth+1) < MAX_CROSSBAR_DEPTH) )
        {
            // hold on crossbar, will be released when graph is destroyed
            pXbar->AddRef();

            // remember crossbar route
            p_sys->crossbar_routes[depth].pXbar = pXbar;
            p_sys->crossbar_routes[depth].VideoInputIndex = inputPinIndex;
            p_sys->crossbar_routes[depth].VideoOutputIndex = outputPinIndex;
            p_sys->crossbar_routes[depth].AudioInputIndex = inputPinIndexRelated;
            p_sys->crossbar_routes[depth].AudioOutputIndex = outputPinIndexRelated;

            msg_Dbg( p_this, "crossbar at depth %d, found route for "
                     "output %ld (type %s) to input %ld (type %s)", depth,
                     outputPinIndex, GetPhysicalPinName( outputPinPhysicalType ),
                     inputPinIndex, GetPhysicalPinName( inputPinPhysicalType ) );

            result = S_OK;
        }
    }

    pXbar->Release();
    pinInfo.pFilter->Release();
    p_output_pin->Release ();

    return result;
}