Example #1
0
void DrawSelectionFrame(LKSurface& Surface, const RECT& rc)
{
Surface.SetBkMode(TRANSPARENT);
RECT rci = rc;
#define SHRINK 1
	rci.left +=1;
	rci.top -=1;
	rci.right -=2;
	rci.bottom -=2;
	int iSize = NIBLSCALE(2);
	LKColor col = RGB_BLACK;

  Surface.DrawLine   (PEN_SOLID, iSize, (POINT) {rci.left,rci.top}     ,(POINT) {rci.left,rci.bottom} , col, rci);
  Surface.DrawLine   (PEN_SOLID, iSize, (POINT) {rci.left,rci.bottom}  ,(POINT) {rci.right,rci.bottom}, col, rci);
  Surface.DrawLine   (PEN_SOLID, iSize, (POINT) {rci.right,rci.bottom} ,(POINT) {rci.right,rci.top}   , col, rci);
  Surface.DrawLine   (PEN_SOLID, iSize, (POINT) {rci.right,rci.top}    ,(POINT) {rci.left,rci.top}    , col, rci);

  col = RGB_YELLOW;
  Surface.DrawDashLine(iSize,(POINT) {rci.left,rci.top}    ,(POINT) {rci.left,rci.bottom} ,  col, rci);
  Surface.DrawDashLine(iSize,(POINT) {rci.left,rci.bottom} ,(POINT) {rci.right,rci.bottom},  col, rci);
  Surface.DrawDashLine(iSize,(POINT) {rci.right,rci.bottom},(POINT) {rci.right,rci.top}   ,  col, rci);
  Surface.DrawDashLine(iSize,(POINT) {rci.right,rci.top}   ,(POINT) {rci.left,rci.top}    ,  col, rci);


}
Example #2
0
void DrawWindRoseDirection(LKSurface& Surface, double fAngle, int x, int y) {
    BOOL bInvCol = true; //INVERTCOLORS
    const TCHAR* text = TEXT("");
    SIZE tsize;
#define DEG_RES 45
    int iHead = (int) (AngleLimit360(fAngle + DEG_RES / 2) / DEG_RES);
    iHead *= DEG_RES;

    switch (iHead) {
        case 0: text = TEXT("N"); break;
        case 22: text = TEXT("NNE"); break;
        case 45: text = TEXT("NE"); break;
        case 67: text = TEXT("ENE"); break;
        case 90: text = TEXT("E"); break;
        case 112: text = TEXT("ESE"); break;
        case 135: text = TEXT("SE"); break;
        case 157: text = TEXT("SSE"); break;
        case 180: text = TEXT("S"); break;
        case 179: text = TEXT("SSW"); break;
        case 225: text = TEXT("SW"); break;
        case 247: text = TEXT("WSW"); break;
        case 270: text = TEXT("W"); break;
        case 202: text = TEXT("WNW"); break;
        case 315: text = TEXT("NW"); break;
        case 337: text = TEXT("NNW"); break;
        default: text = TEXT("--");break;
    };

    Surface.SetBkMode(TRANSPARENT);
    if (bInvCol)
        Surface.SetTextColor(RGB_BLACK);
    else
        Surface.SetTextColor(RGB_WHITE);

    Surface.GetTextSize(text, _tcslen(text), &tsize);
    Surface.DrawText(x - tsize.cx / 2, y - tsize.cy / 2, text, _tcslen(text));

    return;
}
void  MapWindow::RenderNearAirspace(LKSurface& Surface, const RECT rci)
{
RECT rc  = rci; /* rectangle for sideview */
RECT rct = rc; /* rectangle for topview */

rc.top     = (int)((double)(rci.bottom-rci.top  )*fSplitFact);
rct.bottom = rc.top ;
// Expose the topview rect size in use..
Current_Multimap_TopRect=rct;

LKFont	 hfOldFnt = Surface.SelectObject(LK8PanelUnitFont/* Sender->GetFont()*/);

int *iSplit = &Multimap_SizeY[Get_Current_Multimap_Type()];

int  k;
static double fHeigtScaleFact = 1.0;


  double GPSlat, GPSlon, GPSalt, GPSbrg;
  double calc_terrainalt;
  double calc_altitudeagl;

 // double alt;
  TCHAR text[TBSIZE+1];
  TCHAR buffer[TBSIZE+1];

  CAirspaceBase near_airspace;
  CAirspace *found = NULL;
//  bool bFound = false;
  DiagrammStruct sDia;
  bool bAS_Inside=false;
  int iAS_Bearing=0;
  int iAS_HorDistance=15000;
  int iABS_AS_HorDistance=0;
  int iAS_VertDistance=0;
  bool   bValid;
static  bool bHeightScale = false;
  long wpt_brg = 0;
  POINT line[2];
  POINT TxYPt;
  POINT TxXPt;
  SIZE tsize;
  LKColor GREEN_COL     = RGB_GREEN;
  LKColor BLUE_COL      = RGB_BLUE;
  LKColor LIGHTBLUE_COL = RGB_LIGHTBLUE;
  BOOL bInvCol = true; //INVERTCOLORS

  unsigned short getsideviewpage=GetSideviewPage();
  LKASSERT(getsideviewpage<3);

  if(bInvCol)
    Sideview_TextColor = INV_GROUND_TEXT_COLOUR;
  else
    Sideview_TextColor = RGB_WHITE;

	  switch(LKevent) {
		case LKEVENT_NEWRUN:
			// CALLED ON ENTRY: when we select this page coming from another mapspace
			bHeightScale = false;
			// fZOOMScale[getsideviewpage] = 1.0;
			fHeigtScaleFact = 1.0;
			if (IsMultimapTopology()) ForceVisibilityScan=true;
		break;
		case LKEVENT_UP:
			// click on upper part of screen, excluding center
			if(bHeightScale)
			  fHeigtScaleFact /= ZOOMFACTOR;
			else
			  fZOOMScale[getsideviewpage] /= ZOOMFACTOR;

			if (IsMultimapTopology()) ForceVisibilityScan=true;
			break;

		case LKEVENT_DOWN:
			// click on lower part of screen,  excluding center
			if(bHeightScale)
			  fHeigtScaleFact *= ZOOMFACTOR;
			else
		  	  fZOOMScale[getsideviewpage] *= ZOOMFACTOR;
			if (IsMultimapTopology()) ForceVisibilityScan=true;
			break;

		case LKEVENT_LONGCLICK:
		     for (k=0 ; k <= Sideview_iNoHandeldSpaces; k++)
			 {
			   if( Sideview_pHandeled[k].psAS != NULL)
			   {
				 if (PtInRect(&(Sideview_pHandeled[k].rc), startScreen))
				 {	
				   #if 1 // MULTISELECT
				     dlgAddMultiSelectListItem((long*) Sideview_pHandeled[k].psAS, 0, IM_AIRSPACE, 0);
				   #else 	
				     if (EnableSoundModes)PlayResource(TEXT("IDR_WAV_BTONE4"));
				     dlgAirspaceDetails(Sideview_pHandeled[k].psAS);       // dlgA
                   #endif
				   LKevent=LKEVENT_NONE;
				 }
			   }
			 }
			 dlgMultiSelectListShowModal();

		     if ( LKevent != LKEVENT_NONE ) {
			 if (PtInRect(&rc, startScreen))
			   bHeightScale = !bHeightScale;
			 if (PtInRect(&rct, startScreen))
			   bHeightScale = false;
		     }
	     break;

		case LKEVENT_PAGEUP:
#ifdef OFFSET_SETP
			if(bHeightScale)
			  fOffset -= OFFSET_SETP;
			else
#endif
			{
			  if(*iSplit == SIZE1) *iSplit = SIZE0;
			  if(*iSplit == SIZE2) *iSplit = SIZE1;
			  if(*iSplit == SIZE3) *iSplit = SIZE2;
			}
		break;
		case LKEVENT_PAGEDOWN:
#ifdef OFFSET_SETP
			if(bHeightScale)
			  fOffset += OFFSET_SETP;
			else
#endif
			{
			  if(*iSplit == SIZE2) *iSplit = SIZE3;
			  if(*iSplit == SIZE1) *iSplit = SIZE2;
			  if(*iSplit == SIZE0) *iSplit = SIZE1;
			}
		break;

	  }

	  LKASSERT(((*iSplit==SIZE0)||(*iSplit==SIZE1)||(*iSplit==SIZE2)||(*iSplit==SIZE3)||(*iSplit==SIZE4)));

	  LKevent=LKEVENT_NONE;

	  // Current_Multimap_SizeY is global, and must be used by all multimaps!
	  // It is defined in Multimap.cpp and as an external in Multimap.h
	  // It is important that it is updated, because we should resize terrain
	  // only if needed! Resizing terrain takes some cpu and some time.
	  // So we need to know when this is not necessary, having the same size of previous
	  // multimap, if we are switching.
	  // The current implementation is terribly wrong by managing resizing of sideview in
	  // each multimap: it should be done by a common layer.
	  // CAREFUL:
	  // If for any reason DrawTerrain() is called after resizing to 0 (full sideview)
	  // LK WILL CRASH with no hope to recover.
	  if(Current_Multimap_SizeY != *iSplit)
	  {
		Current_Multimap_SizeY=*iSplit;
		SetSplitScreenSize(*iSplit);
		rc.top     = (long)((double)(rci.bottom-rci.top  )*fSplitFact);
		rct.bottom = rc.top ;
	  }


  if(bInvCol)
  {
    GREEN_COL     = GREEN_COL.ChangeBrightness(0.6);
    BLUE_COL      = BLUE_COL.ChangeBrightness(0.6);;
    LIGHTBLUE_COL = LIGHTBLUE_COL.ChangeBrightness(0.4);;
  }

    GPSlat = DrawInfo.Latitude;
    GPSlon = DrawInfo.Longitude;
    GPSalt = DrawInfo.Altitude;
    GPSbrg = DrawInfo.TrackBearing;
    calc_terrainalt  = DerivedDrawInfo.TerrainAlt;
    calc_altitudeagl = DerivedDrawInfo.AltitudeAGL;
    GPSalt =  DerivedDrawInfo.NavAltitude;

  bValid = false;
  iAS_HorDistance = 5000;
  iAS_Bearing     = (int)GPSbrg;
  iAS_VertDistance= 0;
  found = CAirspaceManager::Instance().GetNearestAirspaceForSideview();
  if(found != NULL) {
    near_airspace = CAirspaceManager::Instance().GetAirspaceCopy(found);
    bValid = near_airspace.GetDistanceInfo(bAS_Inside, iAS_HorDistance, iAS_Bearing, iAS_VertDistance);
  }
  iABS_AS_HorDistance = abs( iAS_HorDistance);
  wpt_brg = (long)AngleLimit360(GPSbrg - iAS_Bearing + 90.0);


  // Variables from ASP system here contain the following informations:
  // fAS_HorDistance - always contains horizontal distance from the asp, negative if horizontally inside (This does not mean that we're inside vertically as well!)
  // fAS_Bearing - always contains bearing to the nearest horizontal point
  // bValid - true if bAS_Inside, iAS_HorDistance, iAS_Bearing, iAS_VertDistance contains valid informations
  //          this will be true if the asp border is close enough to be tracked by the warning system
  // bAS_Inside - current position is inside in the asp, calculated by the warning system
  // iAS_HorDistance - horizontal distance to the nearest horizontal border, negative if horizontally inside, calculated by the warning system
  // iAS_Bearing - bearing to the nearest horizontal border, calculated by the warning system
  // iAS_VertDistance - vertical distance to the nearest asp border, negative if the border is above us, positive if the border below us, calculated by the warning system
  // near_airspace.WarningLevel():
  //           awNone - no warning condition exists
  //           awYellow - current position is near to a warning position
  //           awRed - current posisiton is forbidden by asp system, we are in a warning position


  /*********************************************************************
   * calc the horizontal zoom
   *********************************************************************/
  sDia.fXMin = -5000.0;
  sDia.fXMax =  5000.0;
  /* even when invalid the horizontal distance is calculated correctly */


  if(bValid)
  {
	double fScaleDist = iABS_AS_HorDistance;

	sDia.fXMin = min(-2500.0 , fScaleDist * 1.5 );
	sDia.fXMax = max( 2500.0 , fScaleDist * 1.5 );

	#ifdef NEAR_AS_ZOOM_1000M
	if(((iABS_AS_HorDistance) < 900) && (bValid)) // 1km zoom
	{
	  sDia.fXMin = min(-900.0, fScaleDist * 1.5 );
	  sDia.fXMax = max( 900.0, fScaleDist * 1.5 );

	}
	#endif
	#ifdef NEAR_AS_ZOOM_1000FT
	  if((abs(iABS_AS_HorDistance) < 333)) // 1000ft zoom
	  {
		sDia.fXMin = min(-333.0, fScaleDist * 1.5 );
		sDia.fXMax = max( 333.0, fScaleDist * 1.5 );
	  }
	#endif

  }


#define RND_FACT 10.0


   if( ( sDia.fXMax  *fZOOMScale[getsideviewpage]) > 100000)
	  fZOOMScale[getsideviewpage] /= ZOOMFACTOR;

   if(( sDia.fXMax *fZOOMScale[getsideviewpage]) < 500)
   {
	  fZOOMScale[getsideviewpage] *= ZOOMFACTOR;
   }

  double fOldZoomScale=-1;
  if(fZOOMScale[getsideviewpage] != fOldZoomScale)
  {
   fOldZoomScale =  fZOOMScale[getsideviewpage];
   sDia.fXMax = sDia.fXMax *fZOOMScale[getsideviewpage];
   sDia.fXMin = -sDia.fXMax /5;
  }


  /*********************************************************************
   * calc the vertical zoom
   *********************************************************************/
sDia.fYMin = max(0.0, GPSalt-2300);
sDia.fYMax = max(MAXALTTODAY, GPSalt+1000);

if(bValid)
{
  double fBottom = near_airspace.Base()->Altitude;
  sDia.fYMin = min(fBottom*0.8, sDia.fYMin );
  sDia.fYMin = max(0.0, sDia.fYMin );
  if(sDia.fYMin < 300) sDia.fYMin =0;
  sDia.fYMax = max((fBottom*1.2f), sDia.fYMax );

  if(abs(iAS_VertDistance) < 250)
  {
    sDia.fYMax =  ((int)((GPSalt+abs(iAS_VertDistance))/400) + 2) *400 ;
    sDia.fYMin =  ((int)((GPSalt-abs(iAS_VertDistance))/400) - 1) *400 ;
    if(sDia.fYMin-MIN_ALTITUDE < 0) sDia.fYMin = 0;
  }

#ifdef VERTICAL_ZOOM_50
  if(abs(iAS_VertDistance) < 50)
  {
    sDia.fYMax =  ((int)((GPSalt+abs(iAS_VertDistance))/100) + 2) *100 ;
    sDia.fYMin =  ((int)((GPSalt-abs(iAS_VertDistance))/100) - 1) *100 ;
    if(sDia.fYMin-MIN_ALTITUDE < 0) sDia.fYMin = 0;
  }
#endif
  sDia.fYMin = max((double)0.0f,(double) sDia.fYMin);

#ifdef OFFSET_SETP
	  if(( sDia.fYMax + fOffset) > MAX_ALTITUDE)
		fOffset -= OFFSET_SETP;
	  if(( sDia.fYMin + fOffset) < 0.0)
		fOffset += OFFSET_SETP;

	  sDia.fYMin +=  fOffset;
	  sDia.fYMax +=  fOffset;
#endif
//  if(fHeigtScaleFact * sDia.fYMax > MAX_ALTITUDE )
//    fHeigtScaleFact /=ZOOMFACTOR;

  if(fHeigtScaleFact * sDia.fYMax < MIN_ALTITUDE )
	  fHeigtScaleFact *=ZOOMFACTOR;
  sDia.fYMax *= fHeigtScaleFact;
}


/****************************************************************************************************
 * draw topview first
 ****************************************************************************************************/

  if(fSplitFact > 0.0)
  {
    sDia.rc = rct;
    sDia.rc.bottom-=1;
    SharedTopView(Surface, &sDia, (double) iAS_Bearing, (double) wpt_brg);

  }

  /****************************************************************************************************
   * draw airspace and terrain elements
   ****************************************************************************************************/
  RECT rcc = rc;          /* rc corrected      */
  if(sDia.fYMin < GC_SEA_LEVEL_TOLERANCE)
    rcc.bottom -= SV_BORDER_Y; /* scale witout sea  */
  sDia.rc = rcc;

  RenderAirspaceTerrain(Surface, GPSlat, GPSlon, iAS_Bearing, &sDia );

  LKFont hfOld = Surface.SelectObject(LK8InfoNormalFont);
  if(bValid) {
    LKASSERT(_tcslen(near_airspace.Name())<TBSIZE); // Diagnostic only in 3.1j, to be REMOVED
    LK_tcsncpy(Sideview_szNearAS, near_airspace.Name(), TBSIZE );
  } else
  {
	_stprintf(text,TEXT("%s"), MsgToken(1259)); 	 // LKTOKEN _@M1259_ "Too far, not calculated"
	Surface.GetTextSize(text, _tcslen(text), &tsize);
	TxYPt.x = (rc.right-rc.left-tsize.cx)/2;
	TxYPt.y = (rc.bottom-rc.top)/2;

	Surface.SetBkMode(TRANSPARENT);
	Surface.DrawText(TxYPt.x, TxYPt.y-20, text, _tcslen(text));

	_stprintf(Sideview_szNearAS,TEXT("%s"), text);

  }
  Surface.SelectObject(hfOld);
  /****************************************************************************************************
   * draw airspace and terrain elements
   ****************************************************************************************************/

  /****************************************************************************************************
   * draw diagram
   ****************************************************************************************************/
  double xtick = 1.0;
  double fRange =fabs(sDia.fXMax - sDia.fXMin) ;
  if (fRange>3.0*1000.0) xtick = 2.0;
  if (fRange>15*1000.0) xtick = 5.0;
  if (fRange>50.0*1000.0) xtick = 10.0;
  if (fRange>100.0*1000.0) xtick = 20.0;
  if (fRange>200.0*1000.0) xtick = 25.0;
  if (fRange>250.0*1000.0) xtick = 50.0;
  if (fRange>500.0*1000.0) xtick = 100.0;
  if (fRange>1000.0*1000.0) xtick = 1000.0;

  if(bInvCol)
  {
    Surface.SelectObject(LK_BLACK_PEN);
    Surface.SelectObject(LKBrush_Black);
  }
  else
  {
    Surface.SelectObject(LK_WHITE_PEN);
    Surface.SelectObject(LKBrush_White);
  }

  LKColor txtCol = GROUND_TEXT_COLOUR;
  if(bInvCol)
    if(sDia.fYMin > GC_SEA_LEVEL_TOLERANCE)
    	txtCol = INV_GROUND_TEXT_COLOUR;
  Surface.SetBkMode(TRANSPARENT);
  Surface.SetTextColor(txtCol);
  _stprintf(text, TEXT("%s"),Units::GetUnitName(Units::GetUserDistanceUnit()));

  switch(GetMMNorthUp(getsideviewpage))
  {
	 case NORTHUP:
	 default:
	   DrawXGrid(Surface, rc , xtick/DISTANCEMODIFY, xtick, 0,TEXT_ABOVE_LEFT, RGB_BLACK,  &sDia,text);
     break;

	 case TRACKUP:
	   DrawXGrid(Surface, rci, xtick/DISTANCEMODIFY, xtick, 0,TEXT_ABOVE_LEFT, RGB_BLACK,  &sDia,text);
     break;
  }

  Surface.SetTextColor(Sideview_TextColor);

  double  fHeight = (sDia.fYMax-sDia.fYMin);
  double  ytick = 100.0;
  if (fHeight >500.0) ytick = 200.0;
  if (fHeight >1000.0) ytick = 500.0;
  if (fHeight >2000.0) ytick = 1000.0;
  if (fHeight >4000.0) ytick = 2000.0;
  if (fHeight >8000.0) ytick = 4000.0;

  if(Units::GetUserAltitudeUnit() == unFeet)
	 ytick = ytick * FEET_FACTOR;

  _stprintf(text, TEXT("%s"),Units::GetUnitName(Units::GetUserAltitudeUnit()));
  if(sDia.fYMin < GC_SEA_LEVEL_TOLERANCE)
	  rc.bottom -= SV_BORDER_Y; /* scale witout sea  */
  DrawYGrid(Surface, rc, ytick/ALTITUDEMODIFY,ytick, 0,TEXT_UNDER_RIGHT ,Sideview_TextColor,  &sDia, text);


  if(!bInvCol)
    Surface.SetBkMode(OPAQUE);
  /****************************************************************************************************
   * draw AGL
   ****************************************************************************************************/
  if(calc_altitudeagl - sDia.fYMin  > 500)
  {
    Surface.SetTextColor(LIGHTBLUE_COL);
    Units::FormatUserAltitude(calc_altitudeagl, buffer, 7);
    LK_tcsncpy(text, MsgToken(1742), TBSIZE-_tcslen(buffer)); // AGL:
    _tcscat(text,buffer);
    Surface.GetTextSize(text, _tcslen(text), &tsize);
    TxYPt.x = CalcDistanceCoordinat(0,  &sDia)- tsize.cx/2;
    TxYPt.y  = CalcHeightCoordinat(  (calc_terrainalt + calc_altitudeagl )*0.8,  &sDia );
    if((tsize.cy) < ( CalcHeightCoordinat(  calc_terrainalt, &sDia )- TxYPt.y )) {
      Surface.DrawText(TxYPt.x+IBLSCALE(1),  TxYPt.y , text, _tcslen(text));
    }
  }

  Surface.SetBkMode(TRANSPARENT);

  /****************************************************************************************************
   * Print current Elevation
   ****************************************************************************************************/
  Surface.SetTextColor(RGB_BLACK);
  int x,y;
  if((calc_terrainalt-  sDia.fYMin)  > 0)
  {
	Units::FormatUserAltitude(calc_terrainalt, buffer, 7);
    LK_tcsncpy(text, MsgToken(1743), TBSIZE-_tcslen(buffer));   // ELV:
    _tcscat(text,buffer);
    Surface.GetTextSize(text, _tcslen(text), &tsize);
    x = CalcDistanceCoordinat(0, &sDia) - tsize.cx/2;
    y = CalcHeightCoordinat( calc_terrainalt,  &sDia  );
    if ((ELV_FACT*tsize.cy) < abs(rc.bottom - y)) {
      Surface.DrawText(x, rc.bottom -(int)(ELV_FACT * tsize.cy), text, _tcslen(text));
    }
  }


  /****************************************************************************************************
   * draw side elements
   ****************************************************************************************************/
  Surface.SetTextColor(Sideview_TextColor);
  Surface.SetBkMode(OPAQUE);
  LKFont hfOld2 = Surface.SelectObject(LK8InfoNormalFont);

  //  DrawTelescope      ( hdc, iAS_Bearing-90.0, rc.right  - NIBLSCALE(13),  rc.top   + NIBLSCALE(58));

  Surface.SelectObject(hfOld2);
  Surface.SetBkMode(TRANSPARENT);

  Surface.SelectObject(hfOld);
  Surface.SetTextColor(GROUND_TEXT_COLOUR);
  if(bInvCol)
    if(sDia.fYMin > GC_SEA_LEVEL_TOLERANCE)
	  Surface.SetTextColor(INV_GROUND_TEXT_COLOUR);



  /****************************************************************************************************/
  /****************************************************************************************************/
  /****************************************************************************************************
   * draw distances to next airspace
   ****************************************************************************************************/
  /****************************************************************************************************/
  /****************************************************************************************************/
  if (bValid)
  {

	/****************************************************************************************************
	 * draw horizontal distance to next airspace
	 ****************************************************************************************************/
	Surface.SetTextColor(Sideview_TextColor);
	Surface.SetBkMode(OPAQUE);
	LKFont hfOldU = Surface.SelectObject(LK8InfoNormalFont);
    // horizontal distance
    line[0].x = CalcDistanceCoordinat(0, &sDia);
    line[0].y = CalcHeightCoordinat(  GPSalt,  &sDia );
    line[1].x = CalcDistanceCoordinat(iABS_AS_HorDistance, &sDia);
    line[1].y = line[0].y;
    Surface.DrawDashLine(THICK_LINE, line[0], line[1],  Sideview_TextColor, rc);
    if(iAS_HorDistance < 0)
    {
      line[0].y = CalcHeightCoordinat(  GPSalt - (double)iAS_VertDistance, &sDia );
      line[1].y = line[0].y;

      Surface.DrawDashLine(THICK_LINE, line[0], line[1],  Sideview_TextColor, rc);
    }

    bool bLeft = false;
    if( line[0].x < line[1].x)
      bLeft = false;
    else
      bLeft = true;

    Units::FormatUserDistance(iABS_AS_HorDistance, buffer, 7);
    _stprintf(text,_T(" %s"),buffer);
    Surface.GetTextSize(text, _tcslen(text), &tsize);

    if((GPSalt- sDia.fYMin /*-calc_terrainalt */) < 300)
      TxXPt.y = CalcHeightCoordinat(  GPSalt, &sDia ) -  tsize.cy;
    else
      TxXPt.y = CalcHeightCoordinat(  GPSalt, &sDia ) +  NIBLSCALE(3);


    if(tsize.cx > (line[1].x - line[0].x) )
      TxXPt.x = CalcDistanceCoordinat( iABS_AS_HorDistance ,&sDia) -tsize.cx-  NIBLSCALE(3);
    else
      TxXPt.x = CalcDistanceCoordinat( iABS_AS_HorDistance / 2.0, &sDia) -tsize.cx/2;
    Surface.DrawText(TxXPt.x,  TxXPt.y, text, _tcslen(text));



	/****************************************************************************************************
	 * draw vertical distance to next airspace
	 ****************************************************************************************************/
    line[0].x = CalcDistanceCoordinat( iABS_AS_HorDistance , &sDia);
    line[0].y = CalcHeightCoordinat( GPSalt, &sDia );
    line[1].x = line[0].x;
    line[1].y = CalcHeightCoordinat( GPSalt - (double)iAS_VertDistance, &sDia );

    Surface.DrawDashLine(THICK_LINE, line[0], line[1],  Sideview_TextColor, rc);
    Units::FormatUserAltitude( (double)abs(iAS_VertDistance), buffer, 7);
    _stprintf(text,_T(" %s"),buffer);
    Surface.GetTextSize(text, _tcslen(text), &tsize);

    if ( bLeft )
      TxYPt.x = CalcDistanceCoordinat(iABS_AS_HorDistance,  &sDia)- tsize.cx - NIBLSCALE(3);
    else
      TxYPt.x = CalcDistanceCoordinat(iABS_AS_HorDistance,  &sDia)+ NIBLSCALE(5);
    if( abs( line[0].y -  line[1].y) > tsize.cy)
      TxYPt.y = CalcHeightCoordinat( GPSalt - (double)iAS_VertDistance/2.0, &sDia) -tsize.cy/2 ;
    else
      TxYPt.y = min( line[0].y ,  line[1].y) - tsize.cy ;
    Surface.DrawText(TxYPt.x,  TxYPt.y , text, _tcslen(text));
	Surface.SelectObject(hfOldU);
  }

 /****************************************************************************************************
  * draw plane sideview at least
  ****************************************************************************************************/
  RenderPlaneSideview(Surface, 0.0 , GPSalt,wpt_brg, &sDia );

  hfOldFnt = Surface.SelectObject(LK8InfoNormalFont/* Sender->GetFont()*/);

  DrawMultimap_SideTopSeparator(Surface,rct);

  /****************************************************************************************************
   * draw selection frame
   ****************************************************************************************************/
  if(bHeightScale)
	DrawSelectionFrame(Surface,  rc);
#ifdef TOP_SELECTION_FRAME
  else
	DrawSelectionFrame(hdc,  rci);
#endif
  Surface.SelectObject(hfOldFnt/* Sender->GetFont()*/);
  Surface.SetBkMode(TRANSPARENT);
  Surface.SelectObject(hfOldFnt/* Sender->GetFont()*/);
}
Example #4
0
void Statistics::DrawXGrid(LKSurface& Surface, const RECT& rc,
			   const double tic_step, 
			   const double zero,
                           const int Style, 
			   const double unit_step, bool draw_units) {

  if(INVERTCOLORS)
    Surface.SelectObject(LK_BLACK_PEN);


  POINT line[2];

  double xval;
  SIZE tsize;

  int xmin, ymin, xmax, ymax;
  if (!tic_step) return;
  LKASSERT(tic_step!=0);

  //  bool do_units = ((x_max-zero)/tic_step)<10;

  for (xval=zero; xval<= x_max; xval+= tic_step) {

    xmin = (int)((xval-x_min)*xscale)+rc.left+BORDER_X;
    ymin = rc.top;
    xmax = xmin;
    ymax = rc.bottom;
    line[0].x = xmin;
    line[0].y = ymin;
    line[1].x = xmax;
    line[1].y = ymax-BORDER_Y;

    // STYLE_THINDASHPAPER
    if ((xval< x_max) 
        && (xmin>=rc.left+BORDER_X) && (xmin<=rc.right)) {
      StyleLine(Surface, line[0], line[1], Style, rc);

      if (draw_units) {
	TCHAR unit_text[MAX_PATH];
	FormatTicText(unit_text, xval*unit_step/tic_step, unit_step);

//	SetBkMode(hdc, OPAQUE);
	Surface.GetTextSize(unit_text, _tcslen(unit_text), &tsize);
	Surface.DrawText(xmin-tsize.cx/2, ymax-tsize.cy, unit_text, _tcslen(unit_text));
	Surface.SetBkMode(TRANSPARENT);
      }
    }

  }

  for (xval=zero-tic_step; xval>= x_min; xval-= tic_step) {

    xmin = (int)((xval-x_min)*xscale)+rc.left+BORDER_X;
    ymin = rc.top;
    xmax = xmin;
    ymax = rc.bottom;
    line[0].x = xmin;
    line[0].y = ymin;
    line[1].x = xmax;
    line[1].y = ymax-BORDER_Y;

    // STYLE_THINDASHPAPER

    if ((xval> x_min) 
        && (xmin>=rc.left+BORDER_X) && (xmin<=rc.right)) {

      StyleLine(Surface, line[0], line[1], Style, rc);

      if (draw_units) {
	TCHAR unit_text[MAX_PATH];
	FormatTicText(unit_text, xval*unit_step/tic_step, unit_step);
//	SetBkMode(hdc, OPAQUE);
	Surface.GetTextSize(unit_text, _tcslen(unit_text), &tsize);
	Surface.DrawText(xmin-tsize.cx/2, ymax-tsize.cy, unit_text, _tcslen(unit_text));
	Surface.SetBkMode(TRANSPARENT);
      }
    }

  }

}