// Emit PADS and PADSTACKS. They are sorted and emitted uniquely.
// Via name is synthesized from their attributes, pads are numbered
static void CreatePadsShapesSection( FILE* aFile, BOARD* aPcb )
{
std::vector<D_PAD*> pads;
std::vector<D_PAD*> padstacks;
std::vector<VIA*> vias;
std::vector<VIA*> viastacks;
padstacks.resize( 1 ); // We count pads from 1
// The master layermask (i.e. the enabled layers) for padstack generation
LSET master_layermask = aPcb->GetDesignSettings().GetEnabledLayers();
int cu_count = aPcb->GetCopperLayerCount();
fputs( "$PADS\n", aFile );
// Enumerate and sort the pads
if( aPcb->GetPadCount() > 0 )
{
pads = aPcb->GetPads();
qsort( &pads[0], aPcb->GetPadCount(), sizeof( D_PAD* ),
PadListSortByShape );
}
// The same for vias
for( VIA* via = GetFirstVia( aPcb->m_Track ); via;
via = GetFirstVia( via->Next() ) )
{
vias.push_back( via );
}
qsort( &vias[0], vias.size(), sizeof(VIA*), ViaSort );
// Emit vias pads
TRACK* old_via = 0;
for( unsigned i = 0; i < vias.size(); i++ )
{
VIA* via = vias[i];
if( old_via && 0 == ViaSort( &old_via, &via ) )
continue;
old_via = via;
viastacks.push_back( via );
fprintf( aFile, "PAD V%d.%d.%s ROUND %g\nCIRCLE 0 0 %g\n",
via->GetWidth(), via->GetDrillValue(),
fmt_mask( via->GetLayerSet() ).c_str(),
via->GetDrillValue() / SCALE_FACTOR,
via->GetWidth() / (SCALE_FACTOR * 2) );
}
// Emit component pads
D_PAD* old_pad = 0;
int pad_name_number = 0;
for( unsigned i = 0; i<pads.size(); ++i )
{
D_PAD* pad = pads[i];
pad->SetSubRatsnest( pad_name_number );
if( old_pad && 0==D_PAD::Compare( old_pad, pad ) )
continue; // already created
old_pad = pad;
pad_name_number++;
pad->SetSubRatsnest( pad_name_number );
fprintf( aFile, "PAD P%d", pad->GetSubRatsnest() );
padstacks.push_back( pad ); // Will have its own padstack later
int dx = pad->GetSize().x / 2;
int dy = pad->GetSize().y / 2;
switch( pad->GetShape() )
{
default:
case PAD_SHAPE_CIRCLE:
fprintf( aFile, " ROUND %g\n",
pad->GetDrillSize().x / SCALE_FACTOR );
/* Circle is center, radius */
fprintf( aFile, "CIRCLE %g %g %g\n",
pad->GetOffset().x / SCALE_FACTOR,
-pad->GetOffset().y / SCALE_FACTOR,
pad->GetSize().x / (SCALE_FACTOR * 2) );
break;
case PAD_SHAPE_RECT:
fprintf( aFile, " RECTANGULAR %g\n",
pad->GetDrillSize().x / SCALE_FACTOR );
// Rectangle is begin, size *not* begin, end!
fprintf( aFile, "RECTANGLE %g %g %g %g\n",
(-dx + pad->GetOffset().x ) / SCALE_FACTOR,
(-dy - pad->GetOffset().y ) / SCALE_FACTOR,
dx / (SCALE_FACTOR / 2), dy / (SCALE_FACTOR / 2) );
break;
case PAD_SHAPE_OVAL: // Create outline by 2 lines and 2 arcs
{
// OrCAD Layout call them OVAL or OBLONG - GenCAD call them FINGERs
fprintf( aFile, " FINGER %g\n",
pad->GetDrillSize().x / SCALE_FACTOR );
int dr = dx - dy;
if( dr >= 0 ) // Horizontal oval
{
int radius = dy;
fprintf( aFile, "LINE %g %g %g %g\n",
(-dr + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y - radius) / SCALE_FACTOR,
(dr + pad->GetOffset().x ) / SCALE_FACTOR,
(-pad->GetOffset().y - radius) / SCALE_FACTOR );
// GenCAD arcs are (start, end, center)
fprintf( aFile, "ARC %g %g %g %g %g %g\n",
(dr + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y - radius) / SCALE_FACTOR,
(dr + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y + radius) / SCALE_FACTOR,
(dr + pad->GetOffset().x) / SCALE_FACTOR,
-pad->GetOffset().y / SCALE_FACTOR );
fprintf( aFile, "LINE %g %g %g %g\n",
(dr + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y + radius) / SCALE_FACTOR,
(-dr + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y + radius) / SCALE_FACTOR );
fprintf( aFile, "ARC %g %g %g %g %g %g\n",
(-dr + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y + radius) / SCALE_FACTOR,
(-dr + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y - radius) / SCALE_FACTOR,
(-dr + pad->GetOffset().x) / SCALE_FACTOR,
-pad->GetOffset().y / SCALE_FACTOR );
}
else // Vertical oval
{
dr = -dr;
int radius = dx;
fprintf( aFile, "LINE %g %g %g %g\n",
(-radius + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y - dr) / SCALE_FACTOR,
(-radius + pad->GetOffset().x ) / SCALE_FACTOR,
(-pad->GetOffset().y + dr) / SCALE_FACTOR );
fprintf( aFile, "ARC %g %g %g %g %g %g\n",
(-radius + pad->GetOffset().x ) / SCALE_FACTOR,
(-pad->GetOffset().y + dr) / SCALE_FACTOR,
(radius + pad->GetOffset().x ) / SCALE_FACTOR,
(-pad->GetOffset().y + dr) / SCALE_FACTOR,
pad->GetOffset().x / SCALE_FACTOR,
(-pad->GetOffset().y + dr) / SCALE_FACTOR );
fprintf( aFile, "LINE %g %g %g %g\n",
(radius + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y + dr) / SCALE_FACTOR,
(radius + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y - dr) / SCALE_FACTOR );
fprintf( aFile, "ARC %g %g %g %g %g %g\n",
(radius + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y - dr) / SCALE_FACTOR,
(-radius + pad->GetOffset().x) / SCALE_FACTOR,
(-pad->GetOffset().y - dr) / SCALE_FACTOR,
pad->GetOffset().x / SCALE_FACTOR,
(-pad->GetOffset().y - dr) / SCALE_FACTOR );
}
}
break;
case PAD_SHAPE_TRAPEZOID:
fprintf( aFile, " POLYGON %g\n",
pad->GetDrillSize().x / SCALE_FACTOR );
// XXX TO BE IMPLEMENTED! and I don't know if it could be actually imported by something
break;
}
}
fputs( "\n$ENDPADS\n\n", aFile );
// Now emit the padstacks definitions, using the combined layer masks
fputs( "$PADSTACKS\n", aFile );
// Via padstacks
for( unsigned i = 0; i < viastacks.size(); i++ )
{
VIA* via = viastacks[i];
LSET mask = via->GetLayerSet() & master_layermask;
fprintf( aFile, "PADSTACK VIA%d.%d.%s %g\n",
via->GetWidth(), via->GetDrillValue(),
fmt_mask( mask ).c_str(),
via->GetDrillValue() / SCALE_FACTOR );
for( LSEQ seq = mask.Seq( gc_seq, DIM( gc_seq ) ); seq; ++seq )
{
LAYER_ID layer = *seq;
fprintf( aFile, "PAD V%d.%d.%s %s 0 0\n",
via->GetWidth(), via->GetDrillValue(),
fmt_mask( mask ).c_str(),
GenCADLayerName( cu_count, layer ).c_str()
);
}
}
/* Component padstacks
* CAM350 don't apply correctly the FLIP semantics for padstacks, i.e. doesn't
* swap the top and bottom layers... so I need to define the shape as MIRRORX
* and define a separate 'flipped' padstack... until it appears yet another
* noncompliant importer */
for( unsigned i = 1; i < padstacks.size(); i++ )
{
D_PAD* pad = padstacks[i];
// Straight padstack
fprintf( aFile, "PADSTACK PAD%u %g\n", i, pad->GetDrillSize().x / SCALE_FACTOR );
LSET pad_set = pad->GetLayerSet() & master_layermask;
// the special gc_seq
for( LSEQ seq = pad_set.Seq( gc_seq, DIM( gc_seq ) ); seq; ++seq )
{
LAYER_ID layer = *seq;
fprintf( aFile, "PAD P%u %s 0 0\n", i, GenCADLayerName( cu_count, layer ).c_str() );
}
// Flipped padstack
fprintf( aFile, "PADSTACK PAD%uF %g\n", i, pad->GetDrillSize().x / SCALE_FACTOR );
// the normal LAYER_ID sequence is inverted from gc_seq[]
for( LSEQ seq = pad_set.Seq(); seq; ++seq )
{
LAYER_ID layer = *seq;
fprintf( aFile, "PAD P%u %s 0 0\n", i, GenCADLayerNameFlipped( cu_count, layer ).c_str() );
}
}
fputs( "$ENDPADSTACKS\n\n", aFile );
}
bool GENDRILL_WRITER_BASE::GenDrillReportFile( const wxString& aFullFileName )
{
FILE_OUTPUTFORMATTER out( aFullFileName );
static const char separator[] =
" =============================================================\n";
wxASSERT( m_pcb );
unsigned totalHoleCount;
wxString brdFilename = m_pcb->GetFileName();
std::vector<DRILL_LAYER_PAIR> hole_sets = getUniqueLayerPairs();
out.Print( 0, "Drill report for %s\n", TO_UTF8( brdFilename ) );
out.Print( 0, "Created on %s\n\n", TO_UTF8( DateAndTime() ) );
// Output the cu layer stackup, so layer name references make sense.
out.Print( 0, "Copper Layer Stackup:\n" );
out.Print( 0, separator );
LSET cu = m_pcb->GetEnabledLayers() & LSET::AllCuMask();
int conventional_layer_num = 1;
for( LSEQ seq = cu.Seq(); seq; ++seq, ++conventional_layer_num )
{
out.Print( 0, " L%-2d: %-25s %s\n",
conventional_layer_num,
TO_UTF8( m_pcb->GetLayerName( *seq ) ),
layerName( *seq ).c_str() // generic layer name
);
}
out.Print( 0, "\n\n" );
/* output hole lists:
* 1 - through holes
* 2 - for partial holes only: by layer starting and ending pair
* 3 - Non Plated through holes
*/
bool buildNPTHlist = false; // First pass: build PTH list only
// in this loop are plated only:
for( unsigned pair_ndx = 0; pair_ndx < hole_sets.size(); ++pair_ndx )
{
DRILL_LAYER_PAIR pair = hole_sets[pair_ndx];
buildHolesList( pair, buildNPTHlist );
if( pair == DRILL_LAYER_PAIR( F_Cu, B_Cu ) )
{
out.Print( 0, "Drill file '%s' contains\n",
TO_UTF8( getDrillFileName( pair, false, m_merge_PTH_NPTH ) ) );
out.Print( 0, " plated through holes:\n" );
out.Print( 0, separator );
totalHoleCount = printToolSummary( out, false );
out.Print( 0, " Total plated holes count %u\n", totalHoleCount );
}
else // blind/buried
{
out.Print( 0, "Drill file '%s' contains\n",
TO_UTF8( getDrillFileName( pair, false, m_merge_PTH_NPTH ) ) );
out.Print( 0, " holes connecting layer pair: '%s and %s' (%s vias):\n",
TO_UTF8( m_pcb->GetLayerName( ToLAYER_ID( pair.first ) ) ),
TO_UTF8( m_pcb->GetLayerName( ToLAYER_ID( pair.second ) ) ),
pair.first == F_Cu || pair.second == B_Cu ? "blind" : "buried"
);
out.Print( 0, separator );
totalHoleCount = printToolSummary( out, false );
out.Print( 0, " Total plated holes count %u\n", totalHoleCount );
}
out.Print( 0, "\n\n" );
}
// NPTHoles. Generate the full list (pads+vias) if PTH and NPTH are merged,
// or only the NPTH list (which never has vias)
if( !m_merge_PTH_NPTH )
buildNPTHlist = true;
buildHolesList( DRILL_LAYER_PAIR( F_Cu, B_Cu ), buildNPTHlist );
// nothing wrong with an empty NPTH file in report.
if( m_merge_PTH_NPTH )
out.Print( 0, "Not plated through holes are merged with plated holes\n" );
else
out.Print( 0, "Drill file '%s' contains\n",
TO_UTF8( getDrillFileName( DRILL_LAYER_PAIR( F_Cu, B_Cu ),
true, m_merge_PTH_NPTH ) ) );
out.Print( 0, " unplated through holes:\n" );
out.Print( 0, separator );
totalHoleCount = printToolSummary( out, true );
out.Print( 0, " Total unplated holes count %u\n", totalHoleCount );
return true;
}
/* Plot outlines of copper, for copper layer
*/
void PlotLayerOutlines( BOARD* aBoard, PLOTTER* aPlotter,
LSET aLayerMask, const PCB_PLOT_PARAMS& aPlotOpt )
{
BRDITEMS_PLOTTER itemplotter( aPlotter, aBoard, aPlotOpt );
itemplotter.SetLayerSet( aLayerMask );
SHAPE_POLY_SET outlines;
for( LSEQ seq = aLayerMask.Seq( plot_seq, DIM( plot_seq ) ); seq; ++seq )
{
LAYER_ID layer = *seq;
outlines.RemoveAllContours();
aBoard->ConvertBrdLayerToPolygonalContours( layer, outlines );
outlines.Simplify();
// Plot outlines
std::vector< wxPoint > cornerList;
// Now we have one or more basic polygons: plot each polygon
for( int ii = 0; ii < outlines.OutlineCount(); ii++ )
{
for(int kk = 0; kk <= outlines.HoleCount (ii); kk++ )
{
cornerList.clear();
const SHAPE_LINE_CHAIN& path = (kk == 0) ? outlines.COutline( ii ) : outlines.CHole( ii, kk - 1 );
for( int jj = 0; jj < path.PointCount(); jj++ )
cornerList.push_back( wxPoint( path.CPoint( jj ).x , path.CPoint( jj ).y ) );
// Ensure the polygon is closed
if( cornerList[0] != cornerList[cornerList.size() - 1] )
cornerList.push_back( cornerList[0] );
aPlotter->PlotPoly( cornerList, NO_FILL );
}
}
// Plot pad holes
if( aPlotOpt.GetDrillMarksType() != PCB_PLOT_PARAMS::NO_DRILL_SHAPE )
{
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
wxSize hole = pad->GetDrillSize();
if( hole.x == 0 || hole.y == 0 )
continue;
if( hole.x == hole.y )
aPlotter->Circle( pad->GetPosition(), hole.x, NO_FILL );
else
{
wxPoint drl_start, drl_end;
int width;
pad->GetOblongDrillGeometry( drl_start, drl_end, width );
aPlotter->ThickSegment( pad->GetPosition() + drl_start,
pad->GetPosition() + drl_end, width, SKETCH );
}
}
}
}
// Plot vias holes
for( TRACK* track = aBoard->m_Track; track; track = track->Next() )
{
const VIA* via = dyn_cast<const VIA*>( track );
if( via && via->IsOnLayer( layer ) ) // via holes can be not through holes
{
aPlotter->Circle( via->GetPosition(), via->GetDrillValue(), NO_FILL );
}
}
}
}
