//given a capsule specified with a transform, two points, and a radius, this will approximate how much is submerged
//and distribute that force to the appropriate points on the capsule
static bool ApplyCapsuleBuoyancy(const LTVector& vPt1, const LTVector& vPt2, float fLength, float fRadius,
const LTPlane& WSPlane, float& fVolume, LTVector& vApplyAt,
float& fSurfaceArea)
{
//convert the capsule to an OBB and apply it
//determine information about the main axis
LTVector vMainAxis = vPt2 - vPt1;
LTASSERT( fLength > 0.0f, "Invalid capsule length." );
LTVector vUnitAxis = vMainAxis / fLength;
//we can now build up a rotation given the plane normal and the axis to build our transform
LTVector vUp = WSPlane.Normal();
if(fabsf(vUp.Dot(vUnitAxis)) > 0.99f)
{
//too close to use, built an arbitrary orthonormal
vUp = vUnitAxis.BuildOrthonormal();
}
LTMatrix3x4 mTemp;
LTVector vRight = vUnitAxis.Cross(vUp);
vRight.Normalize( );
LTVector vTrueUp = vRight.Cross( vUnitAxis );
mTemp.SetBasisVectors(vRight, vTrueUp, vUnitAxis);
LTRotation rRot;
rRot.ConvertFromMatrix(mTemp);
//now we can form our transform
LTRigidTransform tTransform((vPt1 + vPt2) * 0.5f, rRot);
LTVector vHalfDims(fRadius, fRadius, fLength * 0.5f + fRadius);
return ApplyOBBBuoyancy(tTransform, vHalfDims, WSPlane, fVolume, vApplyAt, fSurfaceArea);
}
bool CClientWeaponDisc::CalculateControlDirection( LTVector *pvControlDirection )
{
//
// safety check
//
// params
ASSERT( 0 != pvControlDirection );
// globals
ASSERT( 0 != g_pLTClient );
ASSERT( 0 != g_pPlayerMgr );
//
// The control direction is the direction the player is facing
//
// get the camera
HOBJECT hCamera;
hCamera = g_pPlayerMgr->GetCamera();
ASSERT( 0 != hCamera );
// determine the orientation of the segment
LTRotation rRot;
g_pLTClient->GetObjectRotation( hCamera, &rRot );
// determine the direction of the segment
LTVector vForward;
*pvControlDirection = rRot.Forward();
return true;
}
LTBOOL ScaleSprite::Update()
{
if (m_bStartOn)
{
g_pCommonLT->SetObjectFlags(m_hObject, OFT_User, USRFLG_VISIBLE, USRFLG_VISIBLE);
g_pCommonLT->SetObjectFlags(m_hObject, OFT_Flags, FLAG_VISIBLE, FLAG_VISIBLE);
}
SetNextUpdate(UPDATE_NEVER);
// BUG - This isn't quite right. Sometimes this works (flipping the sprite)
// other times the sprite shouldn't be flipped...Not sure what the bug is.
// For some reason the sprites are sometimes backwards...Get the rotation
// so we can flip it...
LTRotation rRot;
LTVector vPos, vDir, vU, vR, vF;
g_pLTServer->GetObjectPos(m_hObject, &vPos);
g_pLTServer->GetObjectRotation(m_hObject, &rRot);
vU = rRot.Up();
vR = rRot.Right();
vF = rRot.Forward();
if (m_bFlushWithWorld)
{
// Align the sprite to the surface directly behind the sprite
// (i.e., opposite the forward vector)...
VEC_NORM(vF);
VEC_MULSCALAR(vDir, vF, -1.0f);
// Determine where on the surface to place the sprite...
IntersectInfo iInfo;
IntersectQuery qInfo;
VEC_COPY(qInfo.m_From, vPos);
VEC_COPY(qInfo.m_Direction, vDir);
qInfo.m_Flags = IGNORE_NONSOLID | INTERSECT_OBJECTS | INTERSECT_HPOLY;
qInfo.m_FilterFn = LTNULL;
if (g_pLTServer->CastRay(&qInfo, &iInfo))
{
LTVector vTemp;
VEC_COPY(vPos, iInfo.m_Point);
VEC_COPY(vDir, iInfo.m_Plane.m_Normal);
// Place the sprite just above the surface...
VEC_MULSCALAR(vTemp, vDir, 1.0f);
VEC_ADD(vPos, vPos, vTemp);
g_pLTServer->SetObjectPos(m_hObject, &vPos);
}
}
return LTTRUE;
}
bool CFallingStuffFX::Init(ILTClient *pClientDE, FX_BASEDATA *pBaseData, const CBaseFXProps *pProps)
{
// Perform base class initialisation
if (!CBaseFX::Init(pClientDE, pBaseData, pProps))
return false;
// Store the first position as the last position
m_vLastPos = pBaseData->m_vPos;
// If we have a parent object, get it and apply it's rotation
// to the plane direction
m_vPlaneDir = GetProps()->m_vPlaneDir;
if (m_hParent)
{
LTRotation orient;
m_pLTClient->GetObjectRotation(m_hParent, &orient);
LTMatrix mRot;
Mat_SetBasisVectors(&mRot, &orient.Right(), &orient.Up(), &orient.Forward());
LTVector vTmp = m_vPlaneDir;
MatVMul(&m_vPlaneDir, &mRot, &vTmp);
}
LTVector vUp;
vUp.x = 0.0f;
vUp.y = 1.0f;
vUp.z = 0.0f;
LTVector vTest = m_vPlaneDir;
vTest.x = (float)fabs(vTest.x);
vTest.y = (float)fabs(vTest.y);
vTest.z = (float)fabs(vTest.z);
if (vTest == vUp)
{
// Gotsta use another axis
vUp.x = -1.0f;
vUp.y = 0.0f;
vUp.z = 0.0f;
}
m_vRight = m_vPlaneDir.Cross(vUp);
m_vUp = m_vPlaneDir.Cross(m_vRight);
// Create the base object
CreateDummyObject();
// Success !!
return true;
}
void CDestructibleModel::DoExplosion(char* pTargetName)
{
CWeapons weapons;
weapons.Init(m_hObject);
weapons.ObtainWeapon(m_nExplosionWeaponId);
weapons.ChangeWeapon(m_nExplosionWeaponId);
CWeapon* pWeapon = weapons.GetCurWeapon();
if (!pWeapon) return;
weapons.SetAmmo(pWeapon->GetAmmoId());
pWeapon->SetDamageFactor(m_fDamageFactor);
LTRotation rRot;
g_pLTServer->GetObjectRotation(m_hObject, &rRot);
LTVector vF, vPos;
g_pLTServer->GetObjectPos(m_hObject, &vPos);
vF = rRot.Forward();
// Just blow up in place if we're not supposed to fire along
// forward vector and we don't have a target...
if (!m_bFireAlongForward)
{
pWeapon->SetLifetime(0.0f);
VEC_SET(vF, 0.0f, -1.0f, 0.0f); // Fire down
}
// See if we have a target...If so, point at it.
if (pTargetName)
{
ObjArray <HOBJECT, MAX_OBJECT_ARRAY_SIZE> objArray;
g_pLTServer->FindNamedObjects(pTargetName, objArray);
if (objArray.NumObjects())
{
LTVector vObjPos;
g_pLTServer->GetObjectPos(objArray.GetObject(0), &vObjPos);
vF = vObjPos - vPos;
vF.Normalize();
rRot = LTRotation(vF, LTVector(0.0f, 1.0f, 0.0f));
g_pLTServer->SetObjectRotation(m_hObject, &rRot);
}
}
WeaponFireInfo weaponFireInfo;
weaponFireInfo.hFiredFrom = m_hObject;
weaponFireInfo.vPath = vF;
weaponFireInfo.vFirePos = vPos;
weaponFireInfo.vFlashPos = vPos;
pWeapon->Fire(weaponFireInfo);
}
void GameBase::CreateBoundingBox()
{
if (m_hDimsBox) return;
if (!g_vtDimsAlpha.IsInitted())
{
g_vtDimsAlpha.Init(g_pLTServer, "DimsAlpha", LTNULL, 1.0f);
}
ObjectCreateStruct theStruct;
INIT_OBJECTCREATESTRUCT(theStruct);
LTVector vPos;
g_pLTServer->GetObjectPos(m_hObject, &vPos);
theStruct.m_Pos = vPos;
SAFE_STRCPY(theStruct.m_Filename, "Models\\1x1_square.abc");
SAFE_STRCPY(theStruct.m_SkinName, "Models\\1x1_square.dtx");
theStruct.m_Flags = FLAG_VISIBLE | FLAG_NOLIGHT | FLAG_GOTHRUWORLD;
theStruct.m_ObjectType = OT_MODEL;
HCLASS hClass = g_pLTServer->GetClass("BaseClass");
LPBASECLASS pModel = g_pLTServer->CreateObject(hClass, &theStruct);
if (pModel)
{
m_hDimsBox = pModel->m_hObject;
LTVector vDims;
g_pLTServer->GetObjectDims(m_hObject, &vDims);
LTVector vScale;
VEC_DIVSCALAR(vScale, vDims, 0.5f);
g_pLTServer->ScaleObject(m_hDimsBox, &vScale);
}
LTVector vOffset;
LTRotation rOffset;
vOffset.Init();
rOffset.Init();
HATTACHMENT hAttachment;
LTRESULT dRes = g_pLTServer->CreateAttachment(m_hObject, m_hDimsBox, LTNULL,
&vOffset, &rOffset, &hAttachment);
if (dRes != LT_OK)
{
g_pLTServer->RemoveObject(m_hDimsBox);
m_hDimsBox = LTNULL;
}
LTVector vColor = GetBoundingBoxColor();
g_pLTServer->SetObjectColor(m_hDimsBox, vColor.x, vColor.y, vColor.z, g_vtDimsAlpha.GetFloat());
}
bool WorldModel::AttachServerMark( CServerMark& mark, CLIENTWEAPONFX & theStruct)
{
LTransform globalTransform, parentTransform, localTransform;
ILTTransform *pTransformLT;
LTVector vParentPos, vOffset;
LTRotation rParentRot, rRot;
LTRotation rOffset;
pTransformLT = g_pLTServer->GetTransformLT();
// Attach the mark to the parent object...
// Figure out what the rotation we want is.
rOffset.Init();
rRot = LTRotation(theStruct.vSurfaceNormal, LTVector(0.0f, 1.0f, 0.0f));
// MD
// Ok, now we have the transform in global space but attachments are specified in
// local space (so they can move as the object moves and rotates).
// Set the global LTransform.
pTransformLT->Set(globalTransform, theStruct.vPos, rRot);
// Get the object's transform.
g_pLTServer->GetObjectPos( m_hObject, &vParentPos);
g_pLTServer->GetObjectRotation( m_hObject, &rParentRot);
parentTransform.m_Pos = vParentPos;
parentTransform.m_Rot = rParentRot;
parentTransform.m_Scale.Init(1,1,1);
globalTransform.m_Scale.Init(1,1,1);
// Get the offset.
pTransformLT->Difference(localTransform, globalTransform, parentTransform);
vOffset = localTransform.m_Pos;
rOffset = localTransform.m_Rot;
HATTACHMENT hAttachment = NULL;
LTRESULT dRes = g_pLTServer->CreateAttachment( m_hObject, mark.m_hObject, LTNULL,
&vOffset, &rOffset, &hAttachment);
if (dRes != LT_OK)
{
return false;
}
// Add to the attachment list.
LTObjRefNotifier ref( *this );
ref = mark.m_hObject;
m_AttachmentList.push_back( ref );
return true;
}
void CCoin::RotateToRest()
{
if ( !m_bRotatedToRest )
{
char szSpawn[1024];
sprintf(szSpawn, "WeaponItem Gravity 0;AmmoAmount 1;WeaponType Coin;AmmoType Coin");
LTVector vPos;
g_pLTServer->GetObjectPos(m_hObject, &vPos);
vPos.y += 2.0f; // This offsets us from the floor a bit so we don't pop through when WeaponItem sets its dims.
LTRotation rRot;
rRot.Init();
BaseClass* pObj = SpawnObject(szSpawn, vPos, rRot);
if ( pObj && pObj->m_hObject )
{
g_pLTServer->SetAcceleration(pObj->m_hObject, <Vector(0,0,0));
g_pLTServer->SetVelocity(pObj->m_hObject, <Vector(0,0,0));
}
g_pLTServer->SetObjectFlags(m_hObject, g_pLTServer->GetObjectFlags(m_hObject)&~FLAG_VISIBLE);
}
CGrenade::RotateToRest();
if ( IsCharacter(m_hFiredFrom) )
{
LTVector vPosition;
g_pLTServer->GetObjectPos(m_hObject, &vPosition);
CCharacter* pCharacter = (CCharacter*)g_pLTServer->HandleToObject(m_hFiredFrom);
CharCoinInfo cinfo;
cinfo.fTime = g_pLTServer->GetTime();
cinfo.eSurfaceType = m_eLastHitSurface;
cinfo.vPosition = vPosition;
SURFACE* pSurf = g_pSurfaceMgr->GetSurface(m_eLastHitSurface);
_ASSERT(pSurf);
if (pSurf)
{
cinfo.fVolume = pSurf->fMovementNoiseModifier;
}
else
{
cinfo.fVolume = 1.0f;
}
pCharacter->SetLastCoinInfo(&cinfo);
}
}
LTBOOL CBaseParticleSystemFX::CreateObject(ILTClient *pClientDE)
{
if (!CSpecialFX::CreateObject(pClientDE)) return LTFALSE;
LTVector vPos = m_vPos;
LTRotation rRot;
rRot.Init();
// Use server object position if a position wasn't specified...
if (m_hServerObject)
{
LTVector vZero(0, 0, 0), vServObjPos;
if (vPos.Equals(vZero))
{
pClientDE->GetObjectPos(m_hServerObject, &vServObjPos);
vPos = vServObjPos;
}
else
{
m_basecs.bClientControlsPos = LTTRUE;
}
// Calculate our offset from the server object...
m_vPosOffset = vPos - vServObjPos;
}
// Use the specified rotation if applicable
if (!m_rRot.IsIdentity())
{
rRot = m_rRot;
}
ObjectCreateStruct createStruct;
INIT_OBJECTCREATESTRUCT(createStruct);
createStruct.m_ObjectType = OT_PARTICLESYSTEM;
createStruct.m_Flags = FLAG_VISIBLE | FLAG_UPDATEUNSEEN | FLAG_FOGDISABLE;
createStruct.m_Pos = vPos;
createStruct.m_Rotation = rRot;
m_hObject = m_pClientDE->CreateObject(&createStruct);
// Setup the ParticleSystem...
return SetupSystem();
}
void CMuzzleFlashFX::SetRot(LTRotation rRot)
{
if (!m_pClientDE) return;
HOBJECT hObj;
if (m_bUsingParticles)
{
hObj = m_Particle.GetObject();
if (hObj)
{
if (g_vtReallyClose.GetFloat())
{
LTRotation rInitRot;
rInitRot.Init();
m_pClientDE->SetObjectRotation(hObj, &rInitRot);
}
else
{
m_pClientDE->SetObjectRotation(hObj, &rRot);
}
}
}
if (m_bUsingLight)
{
hObj = m_Light.GetObject();
if (hObj)
{
m_pClientDE->SetObjectRotation(hObj, &rRot);
}
}
if (m_bUsingScale)
{
hObj = m_Scale.GetObject();
if (hObj)
{
LTRotation rTempRot = rRot;
// Camera relative rotation...
if (m_cs.bPlayerView)
{
rTempRot.Init();
}
m_pClientDE->SetObjectRotation(hObj, &rTempRot);
}
}
}
bool GunMount::FireWeapon( )
{
CWeapon* pWeapon = m_Arsenal.GetCurWeapon( );
if( !pWeapon )
return false;
// Get the direction we're firing.
LTRotation rot;
g_pLTServer->GetObjectRotation( m_hObject, &rot );
LTVector vDir = rot.Forward( );
LTVector vPos;
if( !GetFirePos( vPos ))
{
g_pLTServer->GetObjectPos( m_hObject, &vPos );
}
// Tell the weapon to fire.
WeaponFireInfo weaponFireInfo;
static uint8 s_nCount = GetRandom( 0, 255 );
s_nCount++;
weaponFireInfo.hFiredFrom = m_hObject;
weaponFireInfo.hFiringWeapon = pWeapon->GetModelObject( );
weaponFireInfo.vPath = vDir;
weaponFireInfo.vFirePos = vPos;
weaponFireInfo.vFlashPos = vPos;
weaponFireInfo.nSeed = (uint8)GetRandom( 2, 255 );
weaponFireInfo.nPerturbCount = s_nCount;
weaponFireInfo.nFireTimestamp = g_pLTServer->GetRealTimeMS( );
WeaponState eWeaponState = pWeapon->UpdateWeapon( weaponFireInfo, true );
if( eWeaponState == W_FIRED )
{
// Count the round as fired.
if( m_nRoundsToFire > 0 )
m_nRoundsToFire--;
}
// Keep ammo count up and clip loaded. The weapon could have refused
// firing due to weapon fire time limitations, but it still decrements
// ammo.
m_Arsenal.AddAmmo( pWeapon->GetAmmoRecord(), 10 );
pWeapon->ReloadClip( false );
return true;
}
void SecurityCamera::CreateLight()
{
// Create the light...and attach it to the camera...
ObjectCreateStruct theStruct;
INIT_OBJECTCREATESTRUCT(theStruct);
theStruct.m_Pos = m_vPos;
g_pServerButeMgr->GetSecurityCameraString("GreenLight",
theStruct.m_Filename, ARRAY_LEN(theStruct.m_Filename));
theStruct.m_Flags = FLAG_VISIBLE | FLAG_GLOWSPRITE;
theStruct.m_Flags2 = FLAG2_ADDITIVE;
theStruct.m_ObjectType = OT_SPRITE;
HCLASS hClass = g_pLTServer->GetClass("BaseClass");
LPBASECLASS pSprite = g_pLTServer->CreateObject(hClass, &theStruct);
if (!pSprite) return;
m_hLight = pSprite->m_hObject;
LTVector vScale(1, 1, 1);
vScale.x = g_pServerButeMgr->GetSecurityCameraFloat("LightScale");
vScale.y = vScale.x;
g_pLTServer->ScaleObject(m_hLight, &vScale);
// Attach the sprite to the the camera...
LTVector vOffset(0, 0, 0);
LTRotation rOffset;
rOffset.Init();
HATTACHMENT hAttachment;
LTRESULT dRes = g_pLTServer->CreateAttachment(m_hObject, m_hLight, "Light",
&vOffset, &rOffset, &hAttachment);
if (dRes != LT_OK)
{
g_pLTServer->RemoveObject(m_hLight);
m_hLight = LTNULL;
return;
}
}
LTBOOL CLaserTriggerFX::CalcBeamCoords()
{
if (!m_hServerObject) return LTFALSE;
// The beam is relative to the server object's dims...
LTVector vPos;
g_pLTClient->GetObjectPos(m_hServerObject, &vPos);
LTRotation rRot;
g_pLTClient->GetObjectRotation(m_hServerObject, &rRot);
LTVector vU, vR, vF;
vU = rRot.Up();
vR = rRot.Right();
vF = rRot.Forward();
// Okay, the beam is always along the object's longest dim...
LTVector vDir = vF;
LTFLOAT fLongestDim = m_cs.vDims.z; // Assume forward first...
m_pls.fMaxWidth = (m_cs.vDims.x + m_cs.vDims.y); // Assume x/y are same...
if (m_cs.vDims.y > fLongestDim)
{
vDir = vU;
fLongestDim = m_cs.vDims.y;
m_pls.fMaxWidth = (m_cs.vDims.x + m_cs.vDims.z);
}
if (m_cs.vDims.x > fLongestDim)
{
vDir = vR;
fLongestDim = m_cs.vDims.x;
m_pls.fMaxWidth = (m_cs.vDims.y + m_cs.vDims.z);
}
m_pls.vStartPos = vPos + (vDir * fLongestDim);
m_pls.vEndPos = vPos - (vDir * fLongestDim);
return LTTRUE;
}
bool ConstraintWheel::SetupBodySpaceData(const LTRigidTransform& tInvBody1, const LTRigidTransform& tInvBody2)
{
//get the position of our object which will serve as the constraint point
LTVector vConstraintPos;
if(g_pLTServer->GetObjectPos(m_hObject, &vConstraintPos) != LT_OK)
return false;
LTRotation rConstraintOr;
if(g_pLTServer->GetObjectRotation(m_hObject, &rConstraintOr) != LT_OK)
return false;
m_vPivotPt1 = tInvBody1 * vConstraintPos;
m_vPivotPt2 = tInvBody2 * vConstraintPos;
m_vRotation1 = tInvBody1.m_rRot.RotateVector(rConstraintOr.Forward());
m_vRotation2 = tInvBody2.m_rRot.RotateVector(rConstraintOr.Forward());
m_vSuspension2 = tInvBody2.m_rRot.RotateVector(rConstraintOr.Up());
return true;
}
void CFlashLight3rdPerson::GetLightPositions(LTVector& vStartPos, LTVector& vEndPos, LTVector& vUOffset, LTVector& vROffset)
{
if ( !m_hObj ) return;
HMODELSOCKET hSocket;
if ( LT_OK == g_pModelLT->GetSocket(m_hObj, "LeftHand", hSocket) )
{
LTransform tf;
if ( LT_OK == g_pModelLT->GetSocketTransform(m_hObj, hSocket, tf, LTTRUE) )
{
LTVector vPos = tf.m_Pos;
LTRotation rRot = tf.m_Rot;
LTVector vRight, vUp, vForward;
vRight = rRot.Right();
vUp = rRot.Up();
vForward = rRot.Forward();
//vStartPos = vPos - vUp*4.0f + vForward*8.0f;
//vEndPos = vPos + vForward*200.0f;
//vUOffset = vUp;
//vROffset = vRight;
vStartPos = vPos;
vEndPos = vPos + (vForward * g_cvarFLLightOffsetForward.GetFloat());
vROffset = (vRight * g_cvarFLLightOffsetRight.GetFloat());
vUOffset = (vUp * g_cvarFLLightOffsetUp.GetFloat());
// Update the Start/End position to addjust for any offset...
vEndPos += vROffset;
vEndPos += vUOffset;
vStartPos += vROffset;
vStartPos += vUOffset;
}
}
}
LTBOOL CPickupItemFX::Update()
{
if (!m_pClientDE || m_bWantRemove || !m_hServerObject) return LTFALSE;
LTFLOAT fDeltaTime = g_pGameClientShell->GetFrameTime();
if (m_bRotate)
{
LTRotation rRot;
g_pLTClient->GetObjectRotation(m_hServerObject, &rRot);
rRot.Rotate(rRot.Up(), PICKUPITEM_ROTVEL * fDeltaTime);
g_pLTClient->SetObjectRotation(m_hServerObject, &rRot);
}
if (m_bBounce)
{
}
// If we have a ClientFX that is playing hide or show it based on the serverobject...
if( m_linkClientFX.IsValid() )
{
uint32 dwFlags;
g_pCommonLT->GetObjectFlags( m_hServerObject, OFT_Flags, dwFlags );
if( dwFlags & FLAG_VISIBLE )
{
m_linkClientFX.GetInstance()->Show();
}
else
{
m_linkClientFX.GetInstance()->Hide();
}
}
return LTTRUE;
}
void CDestructibleModel::SetSurfaceType()
{
uint32 dwSurfUsrFlgs = 0;
SurfaceType eSurfType = ST_UNKNOWN;
// See if this object is a world model...
if (GetObjectType(m_hObject) == OT_WORLDMODEL)
{
LTBOOL bDoBruteForce = LTTRUE;
// See if we have a surface override...
if (m_hstrSurfaceOverride)
{
const char* pSurfName = g_pLTServer->GetStringData(m_hstrSurfaceOverride);
if (pSurfName)
{
SURFACE* pSurf = g_pSurfaceMgr->GetSurface(pSurfName);
if (pSurf && pSurf->eType != ST_UNKNOWN)
{
eSurfType = pSurf->eType;
bDoBruteForce = LTFALSE;
}
}
}
// Determine our surface...the hard way...
if (bDoBruteForce)
{
IntersectQuery qInfo;
IntersectInfo iInfo;
LTVector vPos, vDims;
LTRotation rRot;
g_pLTServer->GetObjectPos(m_hObject, &vPos);
g_pLTServer->GetObjectRotation(m_hObject, &rRot);
g_pPhysicsLT->GetObjectDims(m_hObject, &vDims);
LTFLOAT fMaxDims = vDims.x;
fMaxDims = Max(fMaxDims, vDims.y);
fMaxDims = Max(fMaxDims, vDims.z);
qInfo.m_From = vPos + (rRot.Forward() * (fMaxDims + 1));
qInfo.m_To = vPos;
qInfo.m_Flags = INTERSECT_OBJECTS | IGNORE_NONSOLID | INTERSECT_HPOLY;
SurfaceType eType = ST_UNKNOWN;
if (g_pLTServer->IntersectSegment(&qInfo, &iInfo))
{
if (iInfo.m_hObject == m_hObject)
{
eSurfType = GetSurfaceType(iInfo);
}
}
}
}
else
{
DEBRIS* pDebris = g_pDebrisMgr->GetDebris(m_nDebrisId);
if (pDebris)
{
eSurfType = pDebris->eSurfaceType;
}
}
dwSurfUsrFlgs = SurfaceToUserFlag(eSurfType);
g_pCommonLT->SetObjectFlags(m_hObject, OFT_User, dwSurfUsrFlgs, dwSurfUsrFlgs);
g_pCommonLT->GetObjectFlags(m_hObject, OFT_Flags, m_dwOriginalFlags);
}
bool CCreateRayFX::Update( float tmFrameTime )
{
//track our performance
CTimedSystemBlock TimingBlock(g_tsClientFXCreateRayFX);
//update our base object
BaseUpdate(tmFrameTime);
//we only want to create the effect as we become active
if(IsInitialFrame() && (GetProps()->m_nNumToCreate > 0))
{
//determine the object position and orientation of our object
LTVector vObjPos;
LTRotation rObjRot;
GetCurrentTransform(GetUnitLifetime(), vObjPos, rObjRot);
//handle two special pipelines to gain performance when there is no scattering
if(MATH_RADIANS_TO_DEGREES(GetProps()->m_fRandomCone) < 1.0f)
{
LTRigidTransform tHitTrans;
HOBJECT hHitObj;
//no scattering, just do a single intersection for all effects
if(DetermineIntersection(vObjPos, rObjRot.Forward(), hHitObj, tHitTrans))
{
//and now generate all of our effects
for(uint32 nCurrEffect = 0; nCurrEffect < GetProps()->m_nNumToCreate; nCurrEffect++)
{
CLIENTFX_CREATESTRUCT CreateStruct("", GetProps()->m_nFXFlags, hHitObj, tHitTrans);
CBaseCreateFX::CreateEffect(CreateStruct);
}
}
}
else
{
//we need to scatter
//extract our vectors from the orientation
LTVector vObjRight, vObjUp, vObjForward;
rObjRot.GetVectors(vObjRight, vObjUp, vObjForward);
//and now generate all of our effects
for(uint32 nCurrEffect = 0; nCurrEffect < GetProps()->m_nNumToCreate; nCurrEffect++)
{
LTRigidTransform tHitTrans;
HOBJECT hHitObj;
//now build up the forward within a specified cone
//first off spin it randomly around the forward
float fPlaneAngle = GetRandom(0.0f, MATH_CIRCLE);
LTVector vPlaneVector = vObjRight * cosf(fPlaneAngle) + vObjUp * sinf(fPlaneAngle);
//now tilt it away from the forward vector
float fTiltPercent = powf(GetRandom(0.0f, 1.0f), GetProps()->m_fCenterBias);
float fTiltAngle = fTiltPercent * GetProps()->m_fRandomCone;
LTVector vRandomForward = vObjForward * cosf(fTiltAngle) + vPlaneVector * sinf(fTiltAngle);
if(DetermineIntersection(vObjPos, vRandomForward, hHitObj, tHitTrans))
{
CLIENTFX_CREATESTRUCT CreateStruct("", GetProps()->m_nFXFlags, hHitObj, tHitTrans);
CBaseCreateFX::CreateEffect(CreateStruct);
}
}
}
}
//we always return false because we always want to be placed into a shutting down state since
//we just emit and then do nothing
return false;
}
void CNodeController::UpdateHeadFollowPosControl(NCSTRUCT *pNodeControl)
{
LTVector vPos;
LTRotation rRot;
LTransform transform;
LTVector vU, vR, vF;
//----------------------------------------------------------------------
// Get information about the control node...
// *** NOTE: On the head node... vU faces forward, vR faces down, vF faces right ***
// Get access to the controls...
ILTMath *pMathLT = g_pLTClient->GetMathLT();
ILTModel *pModelLT = g_pLTClient->GetModelLT();
ILTTransform *pTransformLT = g_pLTClient->GetTransformLT();
// Get the transform of the node we're controlling
pModelLT->GetNodeTransform(GetCFX()->GetServerObj(), m_aNodes[pNodeControl->eModelNode].hModelNode, transform, LTTRUE);
// Decompose the transform into the position and rotation
pTransformLT->Get(transform, vPos, rRot);
pMathLT->GetRotationVectors(rRot, vR, vU, vF);
// Get information about the follow position...
LTVector vObjPos = pNodeControl->vFollowPos;
// Turn the follow control off if the expire time has past
if(pNodeControl->fFollowExpireTime <= 0.0f)
{
pNodeControl->fFollowExpireTime = 0.0f;
pNodeControl->bFollowOn = LTFALSE;
}
else
pNodeControl->fFollowExpireTime -= g_pGameClientShell->GetFrameTime();
//----------------------------------------------------------------------
// Setup the rotation matrix to directly follow the destination position
// Get the direction that we're going to face...
LTVector vDir = vObjPos - vPos;
// Setup some temp vectors that are on the x/z plane...
LTVector vTempU, vTempF, vTempDir;
vTempU = vU; vTempU.y = 0.0f;
vTempF = vF; vTempF.y = 0.0f;
vTempDir = vDir; vTempDir.y = 0.0f;
VEC_NORM(vTempU);
VEC_NORM(vTempF);
VEC_NORM(vTempDir);
// Get the dot products between the dir vector and the up and forward to determine the rotation angles
LTFLOAT fDotUDir = VEC_DOT(vTempU, vTempDir);
LTFLOAT fDotFDir = VEC_DOT(vTempF, vTempDir);
LTFLOAT fDotRDir = 0.0f;
// Init the vectors to get a rotation matrix from...
LTVector vRotAxisR(1.0f, 0.0f, 0.0f);
// Get the first rotation angle
LTFLOAT fAngle1 = pNodeControl->bFollowOn ? fDotUDir : 1.0f;
if(fAngle1 < -0.1f) fAngle1 = -0.1f; // HACK! Limit the head rotation
fAngle1 = (1.0f - fAngle1) * MATH_HALFPI;
if(fDotFDir < 0.0f) fAngle1 *= -1.0f;
// Do a full rotation around the first axis so we can get an angle for the second axis
LTFLOAT fTempAngle = pNodeControl->bFollowOn ? ((1.0f - fDotUDir) * MATH_HALFPI) : 0.0f;
pMathLT->RotateAroundAxis(rRot, vR, (fDotFDir < 0.0f) ? -fTempAngle : fTempAngle);
pMathLT->GetRotationVectors(rRot, vR, vU, vF);
VEC_NORM(vDir);
fDotUDir = VEC_DOT(vU, vDir);
fDotRDir = VEC_DOT(vR, vDir);
// Get the second rotation angle
LTFLOAT fAngle2 = pNodeControl->bFollowOn ? fDotUDir : 1.0f;
if(fAngle2 < 0.25f) fAngle2 = 0.25f; // HACK! Limit the head rotation
fAngle2 = (1.0f - fAngle2) * MATH_HALFPI;
if(fDotRDir > 0.0f) fAngle2 *= -1.0f;
// Calculate a max rotation value
LTFLOAT fRotMax = (pNodeControl->fFollowRate * g_pGameClientShell->GetFrameTime() / 180.0f) * MATH_PI;
// Interpolate the angles based off the previous angle
if(fAngle1 > pNodeControl->vFollowAngles.y + fRotMax) fAngle1 = pNodeControl->vFollowAngles.y + fRotMax;
else if(fAngle1 < pNodeControl->vFollowAngles.y - fRotMax) fAngle1 = pNodeControl->vFollowAngles.y - fRotMax;
if(fAngle2 > pNodeControl->vFollowAngles.x + fRotMax) fAngle2 = pNodeControl->vFollowAngles.x + fRotMax;
else if(fAngle2 < pNodeControl->vFollowAngles.x - fRotMax) fAngle2 = pNodeControl->vFollowAngles.x - fRotMax;
// Create a new rotation and rotate around each controlled axis
LTRotation rNewRot;
rNewRot.Init();
pMathLT->RotateAroundAxis(rNewRot, vRotAxisR, fAngle1);
pNodeControl->vFollowAngles.y = fAngle1;
pMathLT->GetRotationVectors(rNewRot, vR, vU, vF);
pMathLT->RotateAroundAxis(rNewRot, vF, fAngle2);
pNodeControl->vFollowAngles.x = fAngle2;
// If we're turned off and back at the start rotation... make the control invalid
if(!pNodeControl->bFollowOn && pNodeControl->vFollowAngles.x == 0.0f && pNodeControl->vFollowAngles.y == 0.0f)
{
pNodeControl->bValid = LTFALSE;
return;
}
// Create a rotation matrix and apply it to the current offset matrix
LTMatrix m1;
pMathLT->SetupRotationMatrix(m1, rNewRot);
m_aNodes[pNodeControl->eModelNode].matTransform = m_aNodes[pNodeControl->eModelNode].matTransform * m1;
}
void CNodeController::UpdateScriptControl(NCSTRUCT *pNodeControl)
{
LTFLOAT fTime = g_pLTClient->GetTime() - pNodeControl->fScriptTime;
ModelNScript eScript = (ModelNScript)pNodeControl->nScript;
int nCurPt = pNodeControl->nCurrentScriptPt;
int nLastPt = pNodeControl->nLastScriptPt;
// g_pLTClient->CPrint("Running node script!");
// Check to see if the script is over... and make it invalid if so
if(fTime > g_pModelButeMgr->GetNScriptPtTime(eScript, nLastPt))
{
// g_pLTClient->CPrint("Ending node script!");
pNodeControl->bValid = LTFALSE;
return;
}
// Get access to the controls...
ILTMath *pMathLT = g_pLTClient->GetMathLT();
// Get the current script point
while(fTime > g_pModelButeMgr->GetNScriptPtTime(eScript, nCurPt))
nCurPt++;
// Calculate the scale value from the last position to the current
LTFLOAT fPtTime1 = g_pModelButeMgr->GetNScriptPtTime(eScript, nCurPt - 1);
LTFLOAT fPtTime2 = g_pModelButeMgr->GetNScriptPtTime(eScript, nCurPt);
LTFLOAT fScale = (fTime - fPtTime1) / (fPtTime2 - fPtTime1);
//----------------------------------------------------------------------------
// Setup the initial position vector
LTVector vPos;
// Get a direction vector from the last position to the current
LTVector vPosDir = g_pModelButeMgr->GetNScriptPtPosOffset(eScript, nCurPt) - g_pModelButeMgr->GetNScriptPtPosOffset(eScript, nCurPt - 1);
VEC_MULSCALAR(vPosDir, vPosDir, fScale);
vPos = g_pModelButeMgr->GetNScriptPtPosOffset(eScript, nCurPt - 1) + vPosDir;
//----------------------------------------------------------------------------
// Setup the initial rotation vector
LTVector vRot;
// Get a direction rotation from the last position to the current
LTVector vRotDir = g_pModelButeMgr->GetNScriptPtRotOffset(eScript, nCurPt) - g_pModelButeMgr->GetNScriptPtRotOffset(eScript, nCurPt - 1);
VEC_MULSCALAR(vRotDir, vRotDir, fScale);
vRot = g_pModelButeMgr->GetNScriptPtRotOffset(eScript, nCurPt - 1) + vRotDir;
// Calculate the rotation...
LTRotation rRot;
LTVector vR, vU, vF;
rRot.Init();
pMathLT->GetRotationVectors(rRot, vR, vU, vF);
pMathLT->RotateAroundAxis(rRot, vR, vRot.x);
pMathLT->RotateAroundAxis(rRot, vU, vRot.y);
pMathLT->RotateAroundAxis(rRot, vF, vRot.z);
//----------------------------------------------------------------------------
// Setup the matrix using the offset position and rotation
LTMatrix m1;
pMathLT->SetupTransformationMatrix(m1, vPos, rRot);
m_aNodes[pNodeControl->eModelNode].matTransform = m_aNodes[pNodeControl->eModelNode].matTransform * m1;
}
void CNodeController::UpdateLipSyncControl(NCSTRUCT *pNodeControl)
{
// Make sure the sound handle is valid and check to see if the sound is done...
if(!pNodeControl->hLipSyncSound || g_pLTClient->IsDone(pNodeControl->hLipSyncSound))
{
g_pLTClient->KillSound(pNodeControl->hLipSyncSound);
pNodeControl->hLipSyncSound = LTNULL;
if (pNodeControl->bShowingSubtitles)
{
g_pInterfaceMgr->ClearSubtitle();
}
pNodeControl->pSixteenBitBuffer = LTNULL;
pNodeControl->pEightBitBuffer = LTNULL;
pNodeControl->bValid = LTFALSE;
return;
}
//
// Process the current sound data (average over sound amplitude).
//
LTFLOAT fAverage = 0.0f; // this will hold the average, normalized from 0.0f to 1.0f.
// Get the sound buffer.
if( !pNodeControl->pSixteenBitBuffer && !pNodeControl->pEightBitBuffer )
{
uint32 dwChannels = 0;
g_pLTClient->GetSoundData(pNodeControl->hLipSyncSound,
pNodeControl->pSixteenBitBuffer,
pNodeControl->pEightBitBuffer,
&pNodeControl->dwSamplesPerSecond,
&dwChannels);
ASSERT( dwChannels == 1);
// If you want to use multi-channel sounds (why would you?), you'll need to
// to account for the interleaving of channels in the following code.
}
ASSERT( pNodeControl->pSixteenBitBuffer || pNodeControl->pEightBitBuffer );
// Average over the data. We do an average of the data from the current point
// being played to 1/g_vtLipSyncFreq.GetFloat() seconds ahead of that point.
uint32 dwOffset = 0;
uint32 dwSize = 0;
if( LT_OK == g_pLTClient->GetSoundOffset(pNodeControl->hLipSyncSound, &dwOffset, &dwSize) )
{
// Determine the end of the data we wish to average over.
const uint32 dwDivisor = uint32(g_vtLipSyncFreq.GetFloat());
uint32 dwOffsetEnd = dwOffset + pNodeControl->dwSamplesPerSecond/dwDivisor;
if( dwOffsetEnd > dwSize )
dwOffsetEnd = dwSize;
// Accumulate the the amplitudes for the average.
uint32 dwMaxAmplitude = 0;
uint32 dwNumSamples = 0;
uint32 dwAccum = 0;
if( pNodeControl->pSixteenBitBuffer )
{
for( int16 * pIterator = pNodeControl->pSixteenBitBuffer + dwOffset;
pIterator < pNodeControl->pSixteenBitBuffer + dwOffsetEnd;
++pIterator)
{
dwAccum += abs(*pIterator);
++dwNumSamples;
}
dwMaxAmplitude = 65536/2;
#ifdef GRAPH_LIPSYNC_SOUND
g_GraphPoints.RecordData(pNodeControl->pSixteenBitBuffer,dwSize,dwOffset);
#endif
}
else if( pNodeControl->pEightBitBuffer )
{
for( int8 * pIterator = pNodeControl->pEightBitBuffer + dwOffset;
pIterator < pNodeControl->pEightBitBuffer + dwOffsetEnd;
++pIterator)
{
dwAccum += abs(*pIterator);
++dwNumSamples;
}
dwMaxAmplitude = 256/2;
#ifdef GRAPH_LIPSYNC_SOUND
g_GraphPoints.RecordData(pNodeControl->pEightBitBuffer,dwSize,dwOffset);
#endif
}
// And find the average!
if( dwNumSamples > 0 )
fAverage = LTFLOAT(dwAccum) / LTFLOAT(dwNumSamples) / LTFLOAT(dwMaxAmplitude);
} //if( LT_OK == g_pLTClient->GetSoundOffset(pNodeControl->hLipSyncSound, &dwOffset, &dwSize) )
//
// Do the rotation.
//
ILTMath *pMathLT = g_pLTClient->GetMathLT();
LTRotation rRot;
rRot.Init();
LTVector vAxis(0.0f, 0.0f, 1.0f);
LTFLOAT fMaxRot = MATH_DEGREES_TO_RADIANS(g_vtLipSyncMaxRot.GetFloat());
// Calculate the rotation.
m_fCurLipSyncRot = fAverage*fMaxRot;
pMathLT->RotateAroundAxis(rRot, vAxis, -m_fCurLipSyncRot);
// Create a rotation matrix and apply it to the current offset matrix
LTMatrix m1;
pMathLT->SetupRotationMatrix(m1, rRot);
m_aNodes[pNodeControl->eModelNode].matTransform = m_aNodes[pNodeControl->eModelNode].matTransform * m1;
}
// ----------------------------------------------------------------------- //
//
// ROUTINE: CTronPlayerObj::GetDefensePercentage()
//
// PURPOSE: How much of the attack damage has our defenese prevented
//
// NOTES: There are actually 2 defense percentages. One is based
// on timing, i.e. player's reation speed, animation speed,
// etc. The other is based on the player's orientation to
// the incoming projectile. If the vector parameter is
// specified, BOTH percentages will be computed and the
// combined result will be returned. If the vector is NOT
// specified, only the timing will be computed.
//
// ----------------------------------------------------------------------- //
float CTronPlayerObj::GetDefensePercentage( LTVector const *pIncomingProjectilePosition /*=0*/) const
{
if ( TRONPLAYEROBJ_NO_DEFEND == m_cDefendType )
{
// not blocking
return 0.0f;
}
//
// Do this in 2 passes. The first pass willl determine
// the contribution to the defense percentage due to the
// timing of the player/animations. The second pass
// will add the contribution of the player's orientation.
//
float fDefenseTimingPercentage;
float fDefenseOrientationPercentage;
// get the weapon
AMMO const *pAmmoData = g_pWeaponMgr->GetAmmo( m_cDefendAmmoId );
ASSERT( 0 != pAmmoData );
ASSERT( 0 != pAmmoData->pProjectileFX );
// get the ammo specific data
DISCCLASSDATA *pDiscData =
dynamic_cast< DISCCLASSDATA* >(
pAmmoData->pProjectileFX->pClassData
);
ASSERT( 0 != pDiscData );
//
// Determine Timing Percentage
//
switch ( m_cDefendType )
{
case MPROJ_START_SWAT_BLOCK:
case MPROJ_START_ARM_BLOCK:
{
// get the current server time
float fCurrentServerTime = g_pLTServer->GetTime() * 1000.0f;
// make sure we're within the range of the block
if ( ( static_cast< int >( fCurrentServerTime ) -
m_nDefendServerTimeStarted ) > m_nDefendDuration )
{
// nope, the block is over
return 0.0f;
}
// Swat and Arm defenses are similar, so fill out these
// variables uniquely (depending on which case we are
// handling), then use the common generic math to figure
// out the answer.
float fMidpointTime;
float fMaxStartTime;
float fMaxEndTime;
float fStartDefendPercentage;
float fMaxDefendPercentage;
float fEndDefendPercentage;
if ( MPROJ_START_SWAT_BLOCK == m_cDefendType )
{
// determine at exactly what time the midpoint takes place
// NOTE: this is relative time, not absolute
fMidpointTime =
( pDiscData->fSwatDefendMidpoint * m_nDefendDuration );
// determine at exactly what time the max starts
// NOTE: this is relative time, not absolute
fMaxStartTime =
fMidpointTime -
fMidpointTime * pDiscData->fSwatDefendStartMaxDefendPercentage;
// determine at exactly what time the max ends
// NOTE: this is relative time, not absolute
fMaxEndTime =
fMidpointTime +
(
( m_nDefendDuration - fMidpointTime ) *
pDiscData->fSwatDefendEndMaxDefendPercentage
);
// determine the starting defend percentage
fStartDefendPercentage = pDiscData->fSwatDefendStartDefendPercentage;
// detecmine the max defend percentage
fMaxDefendPercentage = pDiscData->fSwatDefendMaxDefendPercentage;
// determine the ending defend percentage
fEndDefendPercentage = pDiscData->fSwatDefendEndDefendPercentage;
}
else if ( MPROJ_START_ARM_BLOCK == m_cDefendType )
{
// Not implemented yet. The main question I haven't figured
// out yet is where does the information come from?
fMidpointTime = 0.0f;
fMaxStartTime = 0.0f;
fMaxEndTime = 0.0f;
fStartDefendPercentage = 0.0f;
fMaxDefendPercentage = 0.0f;
fEndDefendPercentage = 0.0f;
}
// determine at exactly how much time we've been in the block
// NOTE: this is relative time, not absolute
float fBlockTime =
fCurrentServerTime - m_nDefendServerTimeStarted;
if ( ( -MATH_EPSILON <= fBlockTime ) &&
( fBlockTime <= fMaxStartTime ) )
{
// somewhere on the uprise
fDefenseTimingPercentage =
fStartDefendPercentage +
(
(
(
fMaxDefendPercentage -
fStartDefendPercentage
) /
fMaxStartTime
) *
fBlockTime
);
}
else if ( ( fMaxStartTime < fBlockTime ) &&
( fBlockTime <= fMaxEndTime ) )
{
// within the max range
fDefenseTimingPercentage = fMaxDefendPercentage;
}
else if ( ( fMaxEndTime < fBlockTime ) &&
( fBlockTime <= m_nDefendDuration ) )
{
// somewhere on the downfall
fDefenseTimingPercentage =
fMaxDefendPercentage -
(
(
(
fMaxDefendPercentage -
fEndDefendPercentage
) /
( m_nDefendDuration - fMaxEndTime )
) *
( fBlockTime - fMaxEndTime )
);
}
else
{
// math problem, we should be here if we are outside
// the bounds of the defense
ASSERT( 0 );
fDefenseTimingPercentage = 0.0f;
}
}
break;
case MPROJ_START_HOLD_BLOCK:
{
// get the current server time
float fCurrentServerTime = g_pLTServer->GetTime() * 1000.0f;
// determine the starting defend percentage
float fStartDefendPercentage = pDiscData->fHoldDefendStartDefendPercentage;
// determine the max defend percentage
float fMaxDefendPercentage = pDiscData->fHoldDefendMaxDefendPercentage;
// determine at exactly how much time we've been in the block
// NOTE: this is relative time, not absolute
float fBlockTime =
fCurrentServerTime - m_nDefendServerTimeStarted;
if ( ( -MATH_EPSILON <= fBlockTime ) &&
( fBlockTime <= m_nDefendDuration ) )
{
// somewhere on the uprise
fDefenseTimingPercentage =
fStartDefendPercentage +
(
(
(
fMaxDefendPercentage -
fStartDefendPercentage
) /
static_cast< float >( m_nDefendDuration )
) *
fBlockTime
);
}
else if ( m_nDefendDuration < fBlockTime )
{
// within the max range
fDefenseTimingPercentage = fMaxDefendPercentage;
}
else
{
// math problem, we should be here if we are outside
// the bounds of the defense
ASSERT( 0 );
fDefenseTimingPercentage = 0.0f;
}
}
break;
case MPROJ_END_HOLD_BLOCK:
{
// get the current server time
float fCurrentServerTime = g_pLTServer->GetTime() * 1000.0f;
// make sure we're within the range of the block
if ( ( static_cast< int >( fCurrentServerTime ) -
m_nDefendServerTimeStarted ) > m_nDefendDuration )
{
// nope, the block is over
return 0.0f;
}
// detecmine the max defend percentage
float fMaxDefendPercentage = pDiscData->fHoldDefendMaxDefendPercentage;
// determine the ending defend percentage
float fEndDefendPercentage = pDiscData->fHoldDefendEndDefendPercentage;
// determine at exactly how much time we've been in the block
// NOTE: this is relative time, not absolute
float fBlockTime =
fCurrentServerTime - m_nDefendServerTimeStarted;
// somewhere on the downfall
fDefenseTimingPercentage =
fMaxDefendPercentage -
(
(
(
fMaxDefendPercentage -
fEndDefendPercentage
) /
( m_nDefendDuration )
) *
( fBlockTime )
);
}
break;
default:
{
// There is some type of block defined that we
// are not handling, and we SHOULD be handling it.
ASSERT( 0 );
return 0.0f;
}
break;
};
//TODO: skip this section of the camera position is too old?
// check if the oriention percentage should be computed
if ( 0 == pIncomingProjectilePosition )
{
// No vector specifed, there is no way
// to compute orientation defense.
return fDefenseTimingPercentage;
}
//
// Determine Orientation percentage
//
// The 3 cases are the same, but they could have different
// control values. Figure out what the specific variables
// are (depending on the specific type of block), then apply
// the generic equations.
float fOrientationMinDefendPercentage;
float fOrientationMaxDefendPercentage;
float fOrientationDeadZone;
float fOrientationMaxZone;
switch ( m_cDefendType )
{
case MPROJ_START_SWAT_BLOCK:
{
fOrientationMinDefendPercentage = pDiscData->fSwatDefendOrientationMinDefendPercentage;
fOrientationMaxDefendPercentage = pDiscData->fSwatDefendOrientationMaxDefendPercentage;
fOrientationDeadZone = MATH_PI - pDiscData->fSwatDefendOrientationDeadZone;
fOrientationMaxZone = pDiscData->fSwatDefendOrientationMaxZone;
}
break;
case MPROJ_START_HOLD_BLOCK:
case MPROJ_END_HOLD_BLOCK:
{
fOrientationMinDefendPercentage = pDiscData->fHoldDefendOrientationMinDefendPercentage;
fOrientationMaxDefendPercentage = pDiscData->fHoldDefendOrientationMaxDefendPercentage;
fOrientationDeadZone = MATH_PI - pDiscData->fHoldDefendOrientationDeadZone;
fOrientationMaxZone = pDiscData->fHoldDefendOrientationMaxZone;
}
break;
case MPROJ_START_ARM_BLOCK:
{
// Not implemented yet. The main question I haven't figured
// out yet is where does the information come from?
fOrientationMinDefendPercentage = 0.0f;
fOrientationMaxDefendPercentage = 0.0f;
fOrientationDeadZone = 0.0f;
fOrientationMaxZone = 0.0f;
}
break;
default:
{
// There is some type of block defined that we
// are not handling, and we SHOULD be handling it.
ASSERT( 0 );
return 0.0f;
}
break;
};
LTRESULT ltResult;
LTVector vDefendPos;
LTVector vDefendPosToProjectile;
// get the player's position
ltResult = g_pLTServer->GetObjectPos( m_hObject, &vDefendPos );
ASSERT( LT_OK == ltResult );
// REMOVE THIS CODE FOR FINAL RELEASE, BUT LEAVE FOR TESTING MULTIPLAYER
// print a warning if the time is new enough
if ( TRONPLAYEROBJ_CLIENT_CAMERA_TIME_OLD_THRESHOLD < ( g_pLTServer->GetTime() - m_nClientCameraOffsetTimeReceivedMS ) )
{
g_pLTServer->CPrint( "Client Camera Offset time is low, possible lag\n" );
g_pLTServer->CPrint( " condition that will affect defensive accuracy.\n" );
g_pLTServer->CPrint( " Currnt value is %5.3f units old.\n", ( g_pLTServer->GetTime() - m_nClientCameraOffsetTimeReceivedMS ) );
}
// add the camera offset vDefendPos += m_vClientCameraOffset;
// find a unit vector from us to the projectile
vDefendPosToProjectile = *pIncomingProjectilePosition -
( m_vClientCameraOffset +
vDefendPos );
vDefendPosToProjectile.y = 0;
vDefendPosToProjectile.Normalize();
// determine a forward vector reprensenting the direction the
// player is facing
LTRotation vPlayerViewOrientation;
ltResult = g_pLTServer->GetObjectRotation( m_hObject, &vPlayerViewOrientation );
ASSERT( LT_OK == ltResult );
LTVector vPlayerViewForward = vPlayerViewOrientation.Forward();
vPlayerViewForward.y = 0;
vPlayerViewForward.Normalize();
float fDotProd = vPlayerViewForward.Dot( vDefendPosToProjectile );
// find the angle between the two vectors
float fDefenseAngle = ltacosf( vPlayerViewForward.Dot( vDefendPosToProjectile ) );
if ( ( MATH_EPSILON <= fDefenseAngle) && ( fDefenseAngle <= fOrientationMaxZone ) )
{
// it's within the max zone
fDefenseOrientationPercentage = fOrientationMaxDefendPercentage;
}
else if ( ( fOrientationMaxZone < fDefenseAngle) && ( fDefenseAngle <= fOrientationDeadZone ) )
{
// it's within the dropoff range
fDefenseOrientationPercentage =
fOrientationMaxDefendPercentage +
( fDefenseAngle - fOrientationMaxZone ) *
( fOrientationMinDefendPercentage - fOrientationMaxDefendPercentage ) /
( fOrientationDeadZone - fOrientationMaxZone );
}
else if ( fOrientationDeadZone <= fDefenseAngle)
{
// it's within the dead zone
fDefenseOrientationPercentage = 0.0f;
}
//
// Final Defense Result
//
float fFinalDefensePercentage = fDefenseTimingPercentage -
fDefenseOrientationPercentage;
return fFinalDefensePercentage;
}
void CLaserBeam::Update(LTVector &vBeamStartPos, const LTRotation* pRDirRot,
LTBOOL b3rdPerson, LTBOOL bDetect)
{
if (!m_bOn) return;
// Calculate beam position...
HOBJECT hCamera = g_pPlayerMgr->GetCamera();
if (!hCamera) return;
HLOCALOBJ hPlayerObj = g_pLTClient->GetClientObject();
if (!hPlayerObj) return;
HOBJECT hFilterList[] = {hPlayerObj, g_pPlayerMgr->GetMoveMgr()->GetObject(), LTNULL};
IntersectQuery qInfo;
IntersectInfo iInfo;
LTVector vPos(0, 0, 0);
LTRotation rRot;
LTVector vU, vR, vF;
if (pRDirRot && b3rdPerson)
{
vPos = vBeamStartPos;
vU = pRDirRot->Up();
vR = pRDirRot->Right();
vF = pRDirRot->Forward();
}
else
{
g_pLTClient->GetObjectRotation(hCamera, &rRot);
g_pLTClient->GetObjectPos(hCamera, &vPos);
vU = rRot.Up();
vR = rRot.Right();
vF = rRot.Forward();
if (g_cvarLaserBeamDebug.GetFloat() == 0.0f)
{
vBeamStartPos += vPos;
}
else if (g_cvarLaserBeamDebug.GetFloat() == 1.0f)
{
vBeamStartPos = vPos;
}
else if (pRDirRot)
{
vU = pRDirRot->Up();
vR = pRDirRot->Right();
vF = pRDirRot->Forward();
vBeamStartPos = vBeamStartPos;
}
}
LTVector vEndPos = vPos + (vF * 10000.0f);
qInfo.m_From = vPos;
qInfo.m_To = vEndPos;
qInfo.m_Flags = INTERSECT_OBJECTS | IGNORE_NONSOLID;
qInfo.m_FilterFn = ObjListFilterFn;
qInfo.m_pUserData = hFilterList;
if (g_pLTClient->IntersectSegment(&qInfo, &iInfo))
{
vEndPos = iInfo.m_Point;
}
// Show the light beam...
LTVector vColor = LTVector(GetRandom(235.0f, 255.0f), GetRandom(35.0f, 55.0f), GetRandom(35.0f, 55.0f));;
LTFLOAT fAlpha = g_cvarLaserBeamAlpha.GetFloat();
if (iInfo.m_hObject && bDetect)
{
uint32 dwUsrFlgs = 0;
g_pCommonLT->GetObjectFlags(iInfo.m_hObject, OFT_User, dwUsrFlgs);
if (dwUsrFlgs & USRFLG_CHARACTER)
{
fAlpha = 0.95f;
vColor.Init(GetRandom(35.0f, 55.0f), GetRandom(235.0f, 255.0f), GetRandom(35.0f, 55.0f));;
}
}
LTFLOAT fWidth = g_cvarLaserBeamThickness.GetFloat();
fWidth = b3rdPerson ? fWidth*2.0f : fWidth;
vBeamStartPos += (vF * g_cvarLaserBeamFOffset.GetFloat());
vBeamStartPos += (vR * g_cvarLaserBeamROffset.GetFloat());
vBeamStartPos += (vU * g_cvarLaserBeamUOffset.GetFloat());
PLFXCREATESTRUCT pls;
if (g_cvarLaserBeamDebug.GetFloat() >= 0.0f)
{
// g_pLTClient->CPrint("StartPos = %.2f, %.2f, %.2f", VEC_EXPAND(vBeamStartPos));
// g_pLTClient->CPrint("EndPos = %.2f, %.2f, %.2f", VEC_EXPAND(vEndPos));
}
pls.vStartPos = vBeamStartPos;
pls.vEndPos = vEndPos;
pls.vInnerColorStart = vColor;
pls.vInnerColorEnd = pls.vInnerColorStart;
pls.vOuterColorStart = LTVector(0, 0, 0);
pls.vOuterColorEnd = LTVector(0, 0, 0);
pls.fAlphaStart = fAlpha;
pls.fAlphaEnd = fAlpha;
pls.fMinWidth = 0;
pls.fMaxWidth = fWidth;
pls.fMinDistMult = 1.0f;
pls.fMaxDistMult = 1.0f;
pls.fLifeTime = 1.0f;
pls.fAlphaLifeTime = 1.0f;
pls.fPerturb = 0.0f;
pls.bAdditive = LTTRUE;
pls.bAlignFlat = b3rdPerson ? LTFALSE : LTTRUE;
pls.nWidthStyle = PLWS_CONSTANT;
pls.nNumSegments = (int)g_cvarLaserBeamNumSegments.GetFloat();
if (m_LightBeam.HasBeenDrawn())
{
// Keep the light beam in the vis list...
m_LightBeam.SetPos(vBeamStartPos);
// Hide the beam in portals if 1st person...Also set flag really
// close to true...
uint32 dwFlags2, dwFlags;
dwFlags = m_LightBeam.GetFlags();
dwFlags2 = m_LightBeam.GetFlags2();
if (b3rdPerson)
{
dwFlags &= ~FLAG_REALLYCLOSE;
}
else
{
if (g_cvarLaserBeamDebug.GetFloat() > 1.0f)
{
dwFlags |= FLAG_REALLYCLOSE;
pls.bUseObjectRotation = LTTRUE;
}
}
m_LightBeam.SetFlags(dwFlags);
m_LightBeam.SetFlags2(dwFlags2);
m_LightBeam.ReInit(&pls);
}
else
{
m_LightBeam.Init(&pls);
m_LightBeam.CreateObject(g_pLTClient);
}
m_LightBeam.Update();
}
void CLightningFX::EmitBolts( float tmFrameTime )
{
// Make sure enough time between emissions has passed...
m_tmElapsedEmission += tmFrameTime;
if( m_fDelay < m_tmElapsedEmission )
{
LTransform lTrans;
LTVector vAttractorPos;
ILTModel *pModelLT = m_pLTClient->GetModelLT();
uint32 nActiveBolts = GetRandom( (int)GetProps()->m_nMinNumBolts, (int)GetProps()->m_nMaxNumBolts );
uint32 nBolt;
bool bCanUseAttractors = (m_lstAttractors.size() > 0);
bool bCanUseRadius = (GetProps()->m_fOmniDirectionalRadius >= 1.0f);
CLightningBolt *pBolt = LTNULL;
LightningBolts::iterator iter;
for( nBolt = 0, iter = m_lstBolts.begin(); iter != m_lstBolts.end(), nBolt < nActiveBolts; ++iter, ++nBolt )
{
pBolt = *iter;
pBolt->m_fWidth = GetRandom( GetProps()->m_fMinBoltWidth, GetProps()->m_fMaxBoltWidth );
pBolt->m_fLifetime = GetRandom( GetProps()->m_fMinLifetime, GetProps()->m_fMaxLifetime );
pBolt->m_tmElapsed = 0.0f;
pBolt->m_bActive = true;
// Grab the position of the object to compensate for offset
if( m_hTarget )
{
m_pLTClient->GetObjectPos( m_hTarget, &vAttractorPos );
}
else
{
vAttractorPos = m_vTargetPos;
}
// Decide if we should use an attractor or radius for the end pos...
if( bCanUseAttractors && (!bCanUseRadius || GetRandom(0,1)) )
{
uint8 nIndex = GetRandom( 0, (int)(m_lstAttractors.size()) - 1 );
CAttractor cAttractor = m_lstAttractors[nIndex];
if( cAttractor.GetTransform( lTrans, true ) == LT_OK )
{
vAttractorPos = lTrans.m_Pos;
}
}
else if( bCanUseRadius )
{
LTVector vRandomPos;
vRandomPos.x = GetRandom( -1.0f, 1.0f );
vRandomPos.y = GetRandom( -1.0f, 1.0f );
vRandomPos.z = GetRandom( -1.0f, 1.0f );
vRandomPos.Normalize();
vRandomPos *= GetRandom( -GetProps()->m_fOmniDirectionalRadius, GetProps()->m_fOmniDirectionalRadius );
vAttractorPos = m_vPos + vRandomPos;
IntersectQuery iQuery;
IntersectInfo iInfo;
iQuery.m_From = m_vPos;
iQuery.m_To = vAttractorPos;
if( m_pLTClient->IntersectSegment( &iQuery, &iInfo ))
{
vAttractorPos = iInfo.m_Point;
}
}
LTVector vNew = m_vPos;
LTVector vDir = vAttractorPos - vNew;
float fStep = vDir.Length() / (float)pBolt->m_nNumSegments;
float fPerturb = GetRandom( GetProps()->m_fMinPerturb, GetProps()->m_fMaxPerturb );
vDir.Normalize();
LTRotation rRot = LTRotation( vDir, LTVector( 0.0f, 1.0f, 0.0f ));
CLinkListNode<PT_TRAIL_SECTION> *pNode = pBolt->m_collPathPts.GetHead();
while( pNode )
{
pNode->m_Data.m_vPos = vNew;
pNode->m_Data.m_tmElapsed = 0.0f;
pNode->m_Data.m_vBisector.Init();
// Add in some perturb going in the direction of the attractor pos for the next section...
vNew += (rRot.Forward() * fStep );
vNew += (rRot.Up() * GetRandom( -fPerturb, fPerturb ));
vNew += (rRot.Right() * GetRandom( -fPerturb, fPerturb ));
// Make sure the last section goes to the end pos...
if( !pNode->m_pNext )
pNode->m_Data.m_vPos = vAttractorPos;
pNode = pNode->m_pNext;
}
}
// Decide when the next emission will be...
m_tmElapsedEmission = 0.0f;
m_fDelay = GetRandom( GetProps()->m_fMinDelay, GetProps()->m_fMaxDelay );
}
}
bool CTracerFX::Init(const FX_BASEDATA *pBaseData, const CBaseFXProps *pProps)
{
//track our performance
CTimedSystemBlock TimingBlock(g_tsClientFXTracer);
//cleanup any old data
Term();
// Perform base class initialisation
if( !CBaseFX::Init(pBaseData, pProps))
return false;
//determine our starting position and orientation
LTVector vPos;
LTRotation rRot;
GetCurrentTransform(0.0f, vPos, rRot);
m_vStartPos = vPos;
//determine what target position we want to use
LTVector vTargetPos;
//if we are using target data, just get the transform from this
if(GetProps()->m_bUseTargetPos && pBaseData->m_bUseTargetData)
{
LTRigidTransform tTargetOffset(pBaseData->m_vTargetOffset, LTRotation::GetIdentity());
LTRigidTransform tWS = GetWorldSpaceTransform(NULL, pBaseData->m_hTargetObject, INVALID_MODEL_NODE, INVALID_MODEL_SOCKET, tTargetOffset);
LTVector vToTarget = tWS.m_vPos - vPos;
m_fRayLength = vToTarget.Mag();
m_vDirection = vToTarget / m_fRayLength;
vTargetPos = tWS.m_vPos;
}
else
{
//determine the end point where we want to stop testing
m_vDirection = rRot.Forward();
m_fRayLength = GetProps()->m_fMaxDistance;
vTargetPos = vPos + m_vDirection * m_fRayLength;
}
//handle intersection if we need to
if(GetProps()->m_bBlockedByGeometry)
{
//we need to perform a ray cast and determine if we actually hit anything in the world. If not,
//we just want to use the maximum tracer length
IntersectQuery iQuery;
IntersectInfo iInfo;
iQuery.m_Flags = INTERSECT_HPOLY | INTERSECT_OBJECTS | IGNORE_NONSOLID;
iQuery.m_FilterFn = TracerListFilterFn;
iQuery.m_pUserData = NULL;
iQuery.m_From = m_vStartPos;
iQuery.m_To = vTargetPos;
//now find the point of intersection
if( g_pLTClient->IntersectSegment( iQuery, &iInfo ) )
{
//we hit something, so use that as our ending position
m_fRayLength = (iInfo.m_Point - m_vStartPos).Mag();
}
}
//now determine our starting position (this is zero unless we start emitted, in which case
//it is the length of the tracer)
if(GetProps()->m_bStartEmitted)
{
//determine the length of this tracer
m_fRayPosition = GetTracerLength();
}
// Combine the direction we would like to face with our parents rotation...
ObjectCreateStruct ocs;
//create a custom render object with the associated material
ocs.m_Pos = vPos;
ocs.m_Rotation = rRot;
ocs.m_ObjectType = OT_CUSTOMRENDER;
if(!GetProps()->m_bSolid)
ocs.m_Flags2 |= FLAG2_FORCETRANSLUCENT;
if(!GetProps()->m_bTranslucentLight)
ocs.m_Flags |= FLAG_NOLIGHT;
m_hObject = g_pLTClient->CreateObject( &ocs );
if( !m_hObject )
return false;
//setup our rendering layer
if(GetProps()->m_bPlayerView)
g_pLTClient->GetRenderer()->SetObjectDepthBiasTableIndex(m_hObject, eRenderLayer_Player);
//setup the callback on the object so that it will render us
g_pLTClient->GetCustomRender()->SetRenderingSpace(m_hObject, eRenderSpace_World);
g_pLTClient->GetCustomRender()->SetRenderCallback(m_hObject, CustomRenderCallback);
g_pLTClient->GetCustomRender()->SetCallbackUserData(m_hObject, this);
//load up the material for this particle system, and assign it to the object
HMATERIAL hMaterial = g_pLTClient->GetRenderer()->CreateMaterialInstance(GetProps()->m_pszMaterial);
g_pLTClient->GetCustomRender()->SetMaterial(m_hObject, hMaterial);
g_pLTClient->GetRenderer()->ReleaseMaterialInstance(hMaterial);
//we don't setup the visibility for this object yet since when it starts out it is not visible
//setup the dynamic light object if the user specified a radius
if(GetProps()->m_fLightRadius > 0.1f)
{
ObjectCreateStruct LightOCS;
LightOCS.m_Pos = vPos;
LightOCS.m_Rotation = rRot;
LightOCS.m_ObjectType = OT_LIGHT;
m_hTracerLight = g_pLTClient->CreateObject( &LightOCS );
//setup the properties of the light
g_pLTClient->SetLightRadius(m_hTracerLight, GetProps()->m_fLightRadius);
g_pLTClient->SetObjectColor(m_hTracerLight, VEC4_EXPAND(GetProps()->m_vLightColor));
g_pLTClient->SetLightType(m_hTracerLight, eEngineLight_Point);
g_pLTClient->SetLightDetailSettings(m_hTracerLight, GetProps()->m_eLightLOD, GetProps()->m_eWorldShadowsLOD, GetProps()->m_eObjectShadowsLOD);
}
// Success !!
return true;
}
void CTargetMgr::CheckForIntersect(float &fDistAway)
{
m_hTarget = LTNULL;
m_ActivationData.Init();
uint32 dwUsrFlags = 0;
const float fMaxDist = 100000.0f;
// Cast ray from the camera to see if there is an object to activate...
LTRotation rRot;
LTVector vPos;
HLOCALOBJ hCamera = g_pPlayerMgr->GetCamera();
g_pLTClient->GetObjectPos(hCamera, &vPos);
g_pLTClient->GetObjectRotation(hCamera, &rRot);
m_ActivationData.m_vPos = vPos;
m_ActivationData.m_rRot = rRot;
IntersectQuery IQuery;
IntersectInfo IInfo;
IQuery.m_From = vPos;
IQuery.m_To = IQuery.m_From + (rRot.Forward() * fMaxDist);
// NOTE the use of the CHECK_FROM_POINT_INSIDE_OBJECTS flag. This flag will
// make sure that any objects that m_From is inside are considered
IQuery.m_Flags = CHECK_FROM_POINT_INSIDE_OBJECTS | INTERSECT_HPOLY | INTERSECT_OBJECTS | IGNORE_NONSOLID;
IQuery.m_FilterActualIntersectFn = ActivateFilterFn;
IQuery.m_pActualIntersectUserData = (void*)&IQuery;
IQuery.m_PolyFilterFn = DoVectorPolyFilterFn;
// [KLS 8/3/02] - ActivateFilterFn may save an object to use that may not be
// the best activation choice (i.e., a fallback choice). However, if a
// better choice isn't found, the fallback choice should be used. That
// fallback choice is stored in g_adFallbackActivationObject so we clear
// it here...
g_adFallbackActivationObject.Init();
if (g_pLTClient->IntersectSegment(&IQuery, &IInfo))
{
m_ActivationData.m_vIntersect = IInfo.m_Point;
if (IsMainWorld(IInfo.m_hObject))
{
if (IInfo.m_hPoly != INVALID_HPOLY)
{
SurfaceType eType = GetSurfaceType(IInfo.m_hPoly);
SURFACE *pSurf = g_pSurfaceMgr->GetSurface(eType);
// See if the surface we tried to activate has an activation
// sound...If so, the user can activate it...
if (pSurf && pSurf->szActivationSnd[0] && pSurf->fActivationSndRadius > 0)
{
m_hTarget = IInfo.m_hObject;
m_ActivationData.m_hTarget = m_hTarget;
m_ActivationData.m_nSurfaceType = eType;
}
}
}
else
{
LTVector vObjPos = m_ActivationData.m_vIntersect;
vObjPos -= vPos;
if (vObjPos.Mag() <= fMaxDist)
{
m_hTarget = IInfo.m_hObject;
m_ActivationData.m_hTarget = m_hTarget;
}
}
// Calculate how far away the object is...
LTVector vDist = m_ActivationData.m_vIntersect - vPos;
fDistAway = vDist.Mag();
}
// [KLS 8/3/02] - Use the fallback object if we have one and we didn't
// find another object more suitable object...
bool bCanUseFallback = (m_ActivationData.m_hTarget ? false : true);
if (!bCanUseFallback)
{
// We can still use the fallback object if it isn't the world or a
// world model...
if (IsMainWorld(m_ActivationData.m_hTarget) ||
OT_WORLDMODEL == GetObjectType(m_ActivationData.m_hTarget))
{
bCanUseFallback = true;
}
}
if ( bCanUseFallback && g_adFallbackActivationObject.m_hTarget )
{
// Ok we hit the fallback object reset some of our target data
LTVector vObjPos;
g_pLTClient->GetObjectPos(g_adFallbackActivationObject.m_hTarget, &vObjPos);
m_ActivationData.m_vIntersect = vObjPos;
vObjPos -= vPos;
if (vObjPos.Mag() <= fMaxDist)
{
m_hTarget = g_adFallbackActivationObject.m_hTarget;
m_ActivationData.m_hTarget = m_hTarget;
}
// Calculate how far away the object is...
LTVector vDist = m_ActivationData.m_vIntersect - vPos;
fDistAway = vDist.Mag();
}
}
LTBOOL CProjectileFX::CreateObject(ILTClient* pClientDE)
{
if (!CSpecialFX::CreateObject(pClientDE) || !m_hServerObject) return LTFALSE;
CGameSettings* pSettings = g_pInterfaceMgr->GetSettings();
if (!pSettings) return LTFALSE;
uint8 nDetailLevel = pSettings->SpecialFXSetting();
LTVector vPos;
LTRotation rRot;
g_pLTClient->GetObjectPos(m_hServerObject, &vPos);
g_pLTClient->GetObjectRotation(m_hServerObject, &rRot);
//m_pClientDE->CPrint("Client start pos (%.2f, %.2f, %.2f)", vPos.x, vPos.y, vPos.z);
//m_fStartTime = m_pClientDE->GetTime();
if (nDetailLevel != RS_LOW)
{
if (m_nFX & PFX_SMOKETRAIL)
{
CreateSmokeTrail(vPos, rRot);
}
if (m_nFX & PFX_LIGHT)
{
CreateLight(vPos, rRot);
}
}
if (m_nFX & PFX_FLARE)
{
CreateFlare(vPos, rRot);
}
if (m_nFX & PFX_FLYSOUND)
{
CreateFlyingSound(vPos, rRot);
}
// Do client-side projectiles in multiplayer games...
if ( g_pClientMultiplayerMgr->IsConnectedToRemoteServer( ))
{
// Set the velocity of the "server" object if it is really just a local
// object...
if (m_bLocal)
{
VEC_COPY(m_vFirePos, vPos);
m_fStartTime = m_pClientDE->GetTime();
LTVector vVel, vF;
vF = rRot.Forward();
m_vPath = vF;
// Special case of adjusting the projectile speed...
LTFLOAT fVel = (LTFLOAT) m_pProjectileFX->nVelocity;
if (m_bAltFire)
{
fVel = (LTFLOAT) m_pProjectileFX->nAltVelocity;
}
LTFLOAT fMultiplier = 1.0f;
if (m_pClientDE->GetSConValueFloat("MissileSpeed", fMultiplier) != LT_NOTFOUND)
{
fVel *= fMultiplier;
}
vVel = vF * fVel;
g_pPhysicsLT->SetVelocity(m_hServerObject, &vVel);
}
}
return LTTRUE;
}
void DebugLineSystem::AddOrientation( const LTVector& vCenter, const LTRotation& rRot, float fLength, uint8 nAlpha)
{
AddArrow(vCenter, vCenter + rRot.Right() * fLength, Color::Red, nAlpha);
AddArrow(vCenter, vCenter + rRot.Up() * fLength, Color::Green, nAlpha);
AddArrow(vCenter, vCenter + rRot.Forward() * fLength, Color::Blue, nAlpha);
}
void CLTMessage_Write::WriteYRotation(CPacket_Write &cPacket, const LTRotation &cRotation)
{
LTVector forward = cRotation.Forward();
float fAngle = (float)atan2(forward.x, forward.z);
cPacket.Writeint8((int8)(fAngle * (127.0f / MATH_PI)));
}
void CFlashLightPlayer::GetLightPositions(LTVector& vStartPos, LTVector& vEndPos, LTVector& vUOffset, LTVector& vROffset)
{
vStartPos.Init();
vEndPos.Init();
vUOffset.Init();
vROffset.Init();
CMoveMgr* pMoveMgr = g_pPlayerMgr->GetMoveMgr();
if (!pMoveMgr) return;
LTRotation rRot;
if (pMoveMgr->GetVehicleMgr()->IsVehiclePhysics())
{
if (g_pPlayerMgr->IsFirstPerson())
{
pMoveMgr->GetVehicleMgr()->GetVehicleLightPosRot(vStartPos, rRot);
}
else // 3rd person vehicle
{
// Get light pos on 3rd-person vehicle...
HLOCALOBJ hPlayerObj = g_pLTClient->GetClientObject();
if (hPlayerObj)
{
g_pLTClient->GetObjectRotation(hPlayerObj, &rRot);
g_pLTClient->GetObjectPos(hPlayerObj, &vStartPos);
}
}
}
else if (g_pPlayerMgr->IsFirstPerson())
{
HOBJECT hCamera = g_pPlayerMgr->GetCamera();
if (!hCamera) return;
g_pLTClient->GetObjectRotation(hCamera, &rRot);
g_pLTClient->GetObjectPos(hCamera, &vStartPos);
}
else // 3rd person
{
// Get light pos from 3rd-person model...
HLOCALOBJ hPlayerObj = g_pLTClient->GetClientObject();
if (hPlayerObj)
{
// g_pLTClient->GetObjectRotation(hPlayerObj, &rRot);
// g_pLTClient->GetObjectPos(hPlayerObj, &vStartPos);
HMODELSOCKET hSocket;
if ( LT_OK == g_pModelLT->GetSocket(hPlayerObj, "LeftHand", hSocket) )
{
LTransform tf;
if ( LT_OK == g_pModelLT->GetSocketTransform(hPlayerObj, hSocket, tf, LTTRUE) )
{
vStartPos = tf.m_Pos;
rRot = tf.m_Rot;
}
}
}
}
vEndPos = vStartPos + (rRot.Forward() * g_cvarFLLightOffsetForward.GetFloat());
if (g_pPlayerMgr->IsFirstPerson())
{
vROffset = (rRot.Right() * g_cvarFLLightOffsetRight.GetFloat());
vUOffset = (rRot.Up() * g_cvarFLLightOffsetUp.GetFloat());
// Update the Start/End position to addjust for any offset...
vEndPos += vROffset;
vEndPos += vUOffset;
vStartPos += vROffset;
vStartPos += vUOffset;
}
}
