bool MtkRTSPClient::handSetup(char* resultString)
{
	CHECK_NULL_COND(session, false); 
	CHECK_NULL_COND(rtsp::env, false);

	bool bSuccess = false;
	
	// Then, setup the "RTPSource"s for the session:
	MediaSubsessionIterator iter(*(session));
	MediaSubsession *subsession = NULL;
	while ((subsession = iter.next()) != NULL) 
	{					
		if (subsession->readSource() == NULL) 
		{
			LOG_ERR("warning");
			continue; // was not initiated
		}

		if (subsession->sink != NULL)/*already be set*/
		{
			continue;
		}

		unsigned int type = getBufType(subsession);
		if (type == 0)
		{
			LOG_ERR("error type=%d", type);
			continue;
		}
		
		{
			iSetupCount--;
			/*set mediay info*/
			setMediaInfo(subsession, type);
		}

		CmpbSink *sink = NULL;
		if ((type != mediatype_audio) && (strcmp(subsession->codecName(), "H264") == 0))
		{
			sink = CmpbH264Sink::createNew(*env, *subsession, type, fileSinkBufferSize);
		}
        else if ((type == mediatype_audio) && 
                    ((stMediaInfo.audioCodec == MEDIACODEC_AC3) || 
                     (stMediaInfo.audioCodec == MEDIACODEC_EAC3) ||
                     (stMediaInfo.audioCodec == MEDIACODEC_MPEG4_GENERIC)))
		{
			sink = CmpbAACSink::createNew(*env, *subsession, type, fileSinkBufferSize);
		}
        else if ((type == mediatype_audio) && (stMediaInfo.audioCodec == MEDIACODEC_MP4A_LATM))
		{
			sink = CmpbLATMSink::createNew(*env, *subsession, type, fileSinkBufferSize);
		}
		else
		{
			sink = CmpbSink::createNew(*env, *subsession, type, fileSinkBufferSize);
		}
		subsession->sink = sink;
		if (subsession->sink == NULL) 
		{
			LOG_ERR("error!"); 
		} 
		else 
		{		
#if 0 /*this should be remove to cmpb sink*/           
			if ((type != mediatype_audio) && (strcmp(subsession->codecName(), "MP4V-ES") == 0)
				&& (subsession->fmtp_config() != NULL)) 
			{
			    // For MPEG-4 video RTP streams, the 'config' information
			    // from the SDP description contains useful VOL etc. headers.
			    // Insert this data at the front of the output file:
			    unsigned configLen;
			    unsigned char* configData
			      = parseGeneralConfigStr(subsession->fmtp_config(), configLen);
			    struct timeval timeNow;
			    gettimeofday(&timeNow, NULL);
			    sink->sendData(configData, configLen, timeNow);
			    delete[] configData;
		  	}
#endif			
			subsession->sink->startPlaying(*(subsession->readSource()),
												subsessionAfterPlaying,
													subsession);
			// Also set a handler to be called if a RTCP "BYE" arrives
			// for this subsession:
			if (subsession->rtcpInstance() != NULL) 
			{
				subsession->rtcpInstance()->setByeHandler(subsessionAfterPlaying, subsession);
			}

			bSuccess = true;
		}

		break;

	}

	if (iSetupCount == 0)
	{
		mediaInfoReady(); 
	}

	return bSuccess ;
}
Example #2
0
int main(int argc, char** argv) {
  // Begin by setting up our usage environment:
  TaskScheduler* scheduler = BasicTaskScheduler::createNew();
  env = BasicUsageEnvironment::createNew(*scheduler);

  progName = argv[0];

  gettimeofday(&startTime, NULL);

#ifdef USE_SIGNALS
  // Allow ourselves to be shut down gracefully by a SIGHUP or a SIGUSR1:
  signal(SIGHUP, signalHandlerShutdown);
  signal(SIGUSR1, signalHandlerShutdown);
#endif

  unsigned short desiredPortNum = 0;

  // unfortunately we can't use getopt() here, as Windoze doesn't have it
  while (argc > 2) {
    char* const opt = argv[1];
    if (opt[0] != '-') usage();
    switch (opt[1]) {

    case 'p': { // specify start port number
      int portArg;
      if (sscanf(argv[2], "%d", &portArg) != 1) {
	usage();
      }
      if (portArg <= 0 || portArg >= 65536 || portArg&1) {
	*env << "bad port number: " << portArg
		<< " (must be even, and in the range (0,65536))\n";
	usage();
      }
      desiredPortNum = (unsigned short)portArg;
      ++argv; --argc;
      break;
    }

    case 'r': { // do not receive data (instead, just 'play' the stream(s))
      createReceivers = False;
      break;
    }

    case 'q': { // output a QuickTime file (to stdout)
      outputQuickTimeFile = True;
      break;
    }

    case '4': { // output a 'mp4'-format file (to stdout)
      outputQuickTimeFile = True;
      generateMP4Format = True;
      break;
    }

    case 'i': { // output an AVI file (to stdout)
      outputAVIFile = True;
      break;
    }

    case 'I': { // specify input interface...
      NetAddressList addresses(argv[2]);
      if (addresses.numAddresses() == 0) {
	*env << "Failed to find network address for \"" << argv[2] << "\"";
	break;
      }
      ReceivingInterfaceAddr = *(unsigned*)(addresses.firstAddress()->data());
      ++argv; --argc;
      break;
    }

    case 'a': { // receive/record an audio stream only
      audioOnly = True;
      singleMedium = "audio";
      break;
    }

    case 'v': { // receive/record a video stream only
      videoOnly = True;
      singleMedium = "video";
      break;
    }

    case 'V': { // disable verbose output
      verbosityLevel = 0;
      break;
    }

    case 'd': { // specify duration, or how much to delay after end time
      float arg;
      if (sscanf(argv[2], "%g", &arg) != 1) {
	usage();
      }
      if (argv[2][0] == '-') { // not "arg<0", in case argv[2] was "-0"
	// a 'negative' argument was specified; use this for "durationSlop":
	duration = 0; // use whatever's in the SDP
	durationSlop = -arg;
      } else {
	duration = arg;
	durationSlop = 0;
      }
      ++argv; --argc;
      break;
    }

    case 'D': { // specify maximum number of seconds to wait for packets:
      if (sscanf(argv[2], "%u", &interPacketGapMaxTime) != 1) {
	usage();
      }
      ++argv; --argc;
      break;
    }

    case 'c': { // play continuously
      playContinuously = True;
      break;
    }

    case 'S': { // specify an offset to use with "SimpleRTPSource"s
      if (sscanf(argv[2], "%d", &simpleRTPoffsetArg) != 1) {
	usage();
      }
      if (simpleRTPoffsetArg < 0) {
	*env << "offset argument to \"-S\" must be >= 0\n";
	usage();
      }
      ++argv; --argc;
      break;
    }

    case 'O': { // Don't send an "OPTIONS" request before "DESCRIBE"
      sendOptionsRequest = False;
      break;
    }

    case 'o': { // Send only the "OPTIONS" request to the server
      sendOptionsRequestOnly = True;
      break;
    }

    case 'm': { // output multiple files - one for each frame
      oneFilePerFrame = True;
      break;
    }

    case 'n': { // notify the user when the first data packet arrives
      notifyOnPacketArrival = True;
      break;
    }

    case 't': {
      // stream RTP and RTCP over the TCP 'control' connection
      if (controlConnectionUsesTCP) {
	streamUsingTCP = True;
      } else {
	usage();
      }
      break;
    }

    case 'T': {
      // stream RTP and RTCP over a HTTP connection
      if (controlConnectionUsesTCP) {
	if (argc > 3 && argv[2][0] != '-') {
	  // The next argument is the HTTP server port number:
	  if (sscanf(argv[2], "%hu", &tunnelOverHTTPPortNum) == 1
	      && tunnelOverHTTPPortNum > 0) {
	    ++argv; --argc;
	    break;
	  }
	}
      }

      // If we get here, the option was specified incorrectly:
      usage();
      break;
    }

    case 'u': { // specify a username and password
      username = argv[2];
      password = argv[3];
      argv+=2; argc-=2;
      if (allowProxyServers && argc > 3 && argv[2][0] != '-') {
	// The next argument is the name of a proxy server:
	proxyServerName = argv[2];
	++argv; --argc;

	if (argc > 3 && argv[2][0] != '-') {
	  // The next argument is the proxy server port number:
	  if (sscanf(argv[2], "%hu", &proxyServerPortNum) != 1) {
	    usage();
	  }
	  ++argv; --argc;
	}
      }
      break;
    }

    case 'A': { // specify a desired audio RTP payload format
      unsigned formatArg;
      if (sscanf(argv[2], "%u", &formatArg) != 1
	  || formatArg >= 96) {
	usage();
      }
      desiredAudioRTPPayloadFormat = (unsigned char)formatArg;
      ++argv; --argc;
      break;
    }

    case 'M': { // specify a MIME subtype for a dynamic RTP payload type
      mimeSubtype = argv[2];
      if (desiredAudioRTPPayloadFormat==0) desiredAudioRTPPayloadFormat =96;
      ++argv; --argc;
      break;
    }

    case 'w': { // specify a width (pixels) for an output QuickTime or AVI movie
      if (sscanf(argv[2], "%hu", &movieWidth) != 1) {
	usage();
      }
      movieWidthOptionSet = True;
      ++argv; --argc;
      break;
    }

    case 'h': { // specify a height (pixels) for an output QuickTime or AVI movie
      if (sscanf(argv[2], "%hu", &movieHeight) != 1) {
	usage();
      }
      movieHeightOptionSet = True;
      ++argv; --argc;
      break;
    }

    case 'f': { // specify a frame rate (per second) for an output QT or AVI movie
      if (sscanf(argv[2], "%u", &movieFPS) != 1) {
	usage();
      }
      movieFPSOptionSet = True;
      ++argv; --argc;
      break;
    }

    case 'F': { // specify a prefix for the audio and video output files
      fileNamePrefix = argv[2];
      ++argv; --argc;
      break;
    }

    case 'b': { // specify the size of buffers for "FileSink"s
      if (sscanf(argv[2], "%u", &fileSinkBufferSize) != 1) {
	usage();
      }
      ++argv; --argc;
      break;
    }

    case 'B': { // specify the size of input socket buffers
      if (sscanf(argv[2], "%u", &socketInputBufferSize) != 1) {
	usage();
      }
      ++argv; --argc;
      break;
    }

    // Note: The following option is deprecated, and may someday be removed:
    case 'l': { // try to compensate for packet loss by repeating frames
      packetLossCompensate = True;
      break;
    }

    case 'y': { // synchronize audio and video streams
      syncStreams = True;
      break;
    }

    case 'H': { // generate hint tracks (as well as the regular data tracks)
      generateHintTracks = True;
      break;
    }

    case 'Q': { // output QOS measurements
      qosMeasurementIntervalMS = 1000; // default: 1 second

      if (argc > 3 && argv[2][0] != '-') {
	// The next argument is the measurement interval,
	// in multiples of 100 ms
	if (sscanf(argv[2], "%u", &qosMeasurementIntervalMS) != 1) {
	  usage();
	}
	qosMeasurementIntervalMS *= 100;
	++argv; --argc;
      }
      break;
    }

    case 's': { // specify initial seek time (trick play)
      double arg;
      if (sscanf(argv[2], "%lg", &arg) != 1 || arg < 0) {
	usage();
      }
      initialSeekTime = arg;
      ++argv; --argc;
      break;
    }

    case 'z': { // scale (trick play)
      float arg;
      if (sscanf(argv[2], "%g", &arg) != 1 || arg == 0.0f) {
	usage();
      }
      scale = arg;
      ++argv; --argc;
      break;
    }

    default: {
      usage();
      break;
    }
    }

    ++argv; --argc;
  }
  if (argc != 2) usage();
  if (outputQuickTimeFile && outputAVIFile) {
    *env << "The -i and -q (or -4) flags cannot both be used!\n";
    usage();
  }
  Boolean outputCompositeFile = outputQuickTimeFile || outputAVIFile;
  if (!createReceivers && outputCompositeFile) {
    *env << "The -r and -q (or -4 or -i) flags cannot both be used!\n";
    usage();
  }
  if (outputCompositeFile && !movieWidthOptionSet) {
    *env << "Warning: The -q, -4 or -i option was used, but not -w.  Assuming a video width of "
	 << movieWidth << " pixels\n";
  }
  if (outputCompositeFile && !movieHeightOptionSet) {
    *env << "Warning: The -q, -4 or -i option was used, but not -h.  Assuming a video height of "
	 << movieHeight << " pixels\n";
  }
  if (outputCompositeFile && !movieFPSOptionSet) {
    *env << "Warning: The -q, -4 or -i option was used, but not -f.  Assuming a video frame rate of "
	 << movieFPS << " frames-per-second\n";
  }
  if (audioOnly && videoOnly) {
    *env << "The -a and -v flags cannot both be used!\n";
    usage();
  }
  if (sendOptionsRequestOnly && !sendOptionsRequest) {
    *env << "The -o and -O flags cannot both be used!\n";
    usage();
  }
  if (tunnelOverHTTPPortNum > 0) {
    if (streamUsingTCP) {
      *env << "The -t and -T flags cannot both be used!\n";
      usage();
    } else {
      streamUsingTCP = True;
    }
  }
  if (!createReceivers && notifyOnPacketArrival) {
    *env << "Warning: Because we're not receiving stream data, the -n flag has no effect\n";
  }
  if (durationSlop < 0) {
    // This parameter wasn't set, so use a default value.
    // If we're measuring QOS stats, then don't add any slop, to avoid
    // having 'empty' measurement intervals at the end.
    durationSlop = qosMeasurementIntervalMS > 0 ? 0.0 : 5.0;
  }

  char* url = argv[1];

  // Create our client object:
  ourClient = createClient(*env, verbosityLevel, progName);
  if (ourClient == NULL) {
    *env << "Failed to create " << clientProtocolName
		<< " client: " << env->getResultMsg() << "\n";
    shutdown();
  }

  if (sendOptionsRequest) {
    // Begin by sending an "OPTIONS" command:
    char* optionsResponse
      = getOptionsResponse(ourClient, url, username, password);
    if (sendOptionsRequestOnly) {
      if (optionsResponse == NULL) {
	*env << clientProtocolName << " \"OPTIONS\" request failed: "
	     << env->getResultMsg() << "\n";
      } else {
	*env << clientProtocolName << " \"OPTIONS\" request returned: "
	     << optionsResponse << "\n";
      }
      shutdown();
    }
    delete[] optionsResponse;
  }

  // Open the URL, to get a SDP description:
  char* sdpDescription
    = getSDPDescriptionFromURL(ourClient, url, username, password,
			       proxyServerName, proxyServerPortNum,
			       desiredPortNum);
  if (sdpDescription == NULL) {
    *env << "Failed to get a SDP description from URL \"" << url
		<< "\": " << env->getResultMsg() << "\n";
    shutdown();
  }

  *env << "Opened URL \"" << url
	  << "\", returning a SDP description:\n" << sdpDescription << "\n";

  // Create a media session object from this SDP description:
  session = MediaSession::createNew(*env, sdpDescription);
  delete[] sdpDescription;
  if (session == NULL) {
    *env << "Failed to create a MediaSession object from the SDP description: " << env->getResultMsg() << "\n";
    shutdown();
  } else if (!session->hasSubsessions()) {
    *env << "This session has no media subsessions (i.e., \"m=\" lines)\n";
    shutdown();
  }

  // Then, setup the "RTPSource"s for the session:
  MediaSubsessionIterator iter(*session);
  MediaSubsession *subsession;
  Boolean madeProgress = False;
  char const* singleMediumToTest = singleMedium;
  while ((subsession = iter.next()) != NULL) {
    // If we've asked to receive only a single medium, then check this now:
    if (singleMediumToTest != NULL) {
      if (strcmp(subsession->mediumName(), singleMediumToTest) != 0) {
		  *env << "Ignoring \"" << subsession->mediumName()
			  << "/" << subsession->codecName()
			  << "\" subsession, because we've asked to receive a single " << singleMedium
			  << " session only\n";
	continue;
      } else {
	// Receive this subsession only
	singleMediumToTest = "xxxxx";
	    // this hack ensures that we get only 1 subsession of this type
      }
    }

    if (desiredPortNum != 0) {
      subsession->setClientPortNum(desiredPortNum);
      desiredPortNum += 2;
    }

    if (createReceivers) {
      if (!subsession->initiate(simpleRTPoffsetArg)) {
	*env << "Unable to create receiver for \"" << subsession->mediumName()
	     << "/" << subsession->codecName()
	     << "\" subsession: " << env->getResultMsg() << "\n";
      } else {
	*env << "Created receiver for \"" << subsession->mediumName()
	     << "/" << subsession->codecName()
	     << "\" subsession (client ports " << subsession->clientPortNum()
	     << "-" << subsession->clientPortNum()+1 << ")\n";
	madeProgress = True;
	
	if (subsession->rtpSource() != NULL) {
	  // Because we're saving the incoming data, rather than playing
	  // it in real time, allow an especially large time threshold
	  // (1 second) for reordering misordered incoming packets:
	  unsigned const thresh = 1000000; // 1 second
	  subsession->rtpSource()->setPacketReorderingThresholdTime(thresh);
	  
	  // Set the RTP source's OS socket buffer size as appropriate - either if we were explicitly asked (using -B),
	  // or if the desired FileSink buffer size happens to be larger than the current OS socket buffer size.
	  // (The latter case is a heuristic, on the assumption that if the user asked for a large FileSink buffer size,
	  // then the input data rate may be large enough to justify increasing the OS socket buffer size also.)
	  int socketNum = subsession->rtpSource()->RTPgs()->socketNum();
	  unsigned curBufferSize = getReceiveBufferSize(*env, socketNum);
	  if (socketInputBufferSize > 0 || fileSinkBufferSize > curBufferSize) {
	    unsigned newBufferSize = socketInputBufferSize > 0 ? socketInputBufferSize : fileSinkBufferSize;
	    newBufferSize = setReceiveBufferTo(*env, socketNum, newBufferSize);
	    if (socketInputBufferSize > 0) { // The user explicitly asked for the new socket buffer size; announce it:
	      *env << "Changed socket receive buffer size for the \""
		   << subsession->mediumName()
		   << "/" << subsession->codecName()
		   << "\" subsession from "
		   << curBufferSize << " to "
		   << newBufferSize << " bytes\n";
	    }
	  }
	}
      }
    } else {
      if (subsession->clientPortNum() == 0) {
	*env << "No client port was specified for the \""
	     << subsession->mediumName()
	     << "/" << subsession->codecName()
	     << "\" subsession.  (Try adding the \"-p <portNum>\" option.)\n";
      } else {
		madeProgress = True;
      }
    }
  }
  if (!madeProgress) shutdown();

  // Perform additional 'setup' on each subsession, before playing them:
  setupStreams();

  // Create output files:
  if (createReceivers) {
    if (outputQuickTimeFile) {
      // Create a "QuickTimeFileSink", to write to 'stdout':
      qtOut = QuickTimeFileSink::createNew(*env, *session, "stdout",
					   fileSinkBufferSize,
					   movieWidth, movieHeight,
					   movieFPS,
					   packetLossCompensate,
					   syncStreams,
					   generateHintTracks,
					   generateMP4Format);
      if (qtOut == NULL) {
	*env << "Failed to create QuickTime file sink for stdout: " << env->getResultMsg();
	shutdown();
      }

      qtOut->startPlaying(sessionAfterPlaying, NULL);
    } else if (outputAVIFile) {
      // Create an "AVIFileSink", to write to 'stdout':
      aviOut = AVIFileSink::createNew(*env, *session, "stdout",
				      fileSinkBufferSize,
				      movieWidth, movieHeight,
				      movieFPS,
				      packetLossCompensate);
      if (aviOut == NULL) {
	*env << "Failed to create AVI file sink for stdout: " << env->getResultMsg();
	shutdown();
      }

      aviOut->startPlaying(sessionAfterPlaying, NULL);
    } else {
      // Create and start "FileSink"s for each subsession:
      madeProgress = False;
      iter.reset();
      while ((subsession = iter.next()) != NULL) {
	if (subsession->readSource() == NULL) continue; // was not initiated

	// Create an output file for each desired stream:
	char outFileName[1000];
	if (singleMedium == NULL) {
	  // Output file name is
	  //     "<filename-prefix><medium_name>-<codec_name>-<counter>"
	  static unsigned streamCounter = 0;
	  snprintf(outFileName, sizeof outFileName, "%s%s-%s-%d",
		   fileNamePrefix, subsession->mediumName(),
		   subsession->codecName(), ++streamCounter);
	} else {
	  sprintf(outFileName, "stdout");
	}
	FileSink* fileSink;
	if (strcmp(subsession->mediumName(), "audio") == 0 &&
	    (strcmp(subsession->codecName(), "AMR") == 0 ||
	     strcmp(subsession->codecName(), "AMR-WB") == 0)) {
	  // For AMR audio streams, we use a special sink that inserts AMR frame hdrs:
	  fileSink = AMRAudioFileSink::createNew(*env, outFileName,
						 fileSinkBufferSize, oneFilePerFrame);
	} else if (strcmp(subsession->mediumName(), "video") == 0 &&
	    (strcmp(subsession->codecName(), "H264") == 0)) {
	  // For H.264 video stream, we use a special sink that insert start_codes:
	  fileSink = H264VideoFileSink::createNew(*env, outFileName,
						 fileSinkBufferSize, oneFilePerFrame);
	} else {
	  // Normal case:
	  fileSink = FileSink::createNew(*env, outFileName,
					 fileSinkBufferSize, oneFilePerFrame);
	}
	subsession->sink = fileSink;
	if (subsession->sink == NULL) {
	  *env << "Failed to create FileSink for \"" << outFileName
		  << "\": " << env->getResultMsg() << "\n";
	} else {
	  if (singleMedium == NULL) {
	    *env << "Created output file: \"" << outFileName << "\"\n";
	  } else {
	    *env << "Outputting data from the \"" << subsession->mediumName()
			<< "/" << subsession->codecName()
			<< "\" subsession to 'stdout'\n";
	  }

	  if (strcmp(subsession->mediumName(), "video") == 0 &&
	      strcmp(subsession->codecName(), "MP4V-ES") == 0 &&
	      subsession->fmtp_config() != NULL) {
	    // For MPEG-4 video RTP streams, the 'config' information
	    // from the SDP description contains useful VOL etc. headers.
	    // Insert this data at the front of the output file:
	    unsigned configLen;
	    unsigned char* configData
	      = parseGeneralConfigStr(subsession->fmtp_config(), configLen);
	    struct timeval timeNow;
	    gettimeofday(&timeNow, NULL);
	    fileSink->addData(configData, configLen, timeNow);
	    delete[] configData;
	  }

	  subsession->sink->startPlaying(*(subsession->readSource()),
					 subsessionAfterPlaying,
					 subsession);

	  // Also set a handler to be called if a RTCP "BYE" arrives
	  // for this subsession:
	  if (subsession->rtcpInstance() != NULL) {
	    subsession->rtcpInstance()->setByeHandler(subsessionByeHandler,
						      subsession);
	  }

	  madeProgress = True;
	}
      }
      if (!madeProgress) shutdown();
    }
  }

  // Finally, start playing each subsession, to start the data flow:

  startPlayingStreams();

  env->taskScheduler().doEventLoop(); // does not return

  return 0; // only to prevent compiler warning
}