CRhinoCommand::result CGenPianoVis::RunCommand( const CRhinoCommandContext& context )
{
Cscript1PlugIn& plugin = script1PlugIn();
if( !plugin.IsDlgVisible() )
{
return CRhinoCommand::nothing;
}
/*GET THE LAYER NAME*/
CRhinoGetString gs;
gs.SetCommandPrompt( L"NAME OF LAYER WHICH CONTAINS VISIONAL PLANE : " );
gs.GetString();
if( gs.CommandResult() != CRhinoCommand::success )
{
return gs.CommandResult();
}
/*VALIDATE THE STRING*/
ON_wString layer_name = gs.String();
layer_name.TrimLeftAndRight();
if( layer_name.IsEmpty() )
{
return CRhinoCommand::cancel;
}
/*GET A REFERENCE TO THE LAYER TABLE*/
CRhinoLayerTable& layer_table = context.m_doc.m_layer_table;
/*FIND THE LAYER*/
int layer_index = layer_table.FindLayer(layer_name );
if( layer_index < 0 )
{
RhinoApp().Print( L"LAYER \"%s\" DOES NOT EXIST.\n", layer_name );
}
else
{
ON_Layer currentLayer;
int numLayers = layer_table.LayerCount();
layer_table.SetCurrentLayerIndex(layer_index);
for(int i = 0; i < numLayers; i++)
{
if(i != layer_index)
{
currentLayer = layer_table[i];
currentLayer.SetVisible(false);
layer_table.ModifyLayer(currentLayer, i);
}
}
context.m_doc.Redraw();
const CRhinoLayer& layer = context.m_doc.m_layer_table[layer_index];
ON_SimpleArray<CRhinoObject*> obj_list;
int object_count = context.m_doc.LookupObject( layer, obj_list );
if( object_count > 0 )
{
/********************************************************************/
//CRhinoObject* obj = obj_list[0];
//if( obj && obj->IsSelectable() )
//{
// obj->Select(true);
// obj->Highlight(true);
// m_doc.Redraw();
//}
/********************************************************************/
//aniello gegin
// Disable redrawing
//CRhinoView::EnableDrawing( FALSE ); meglio tenerlo disabilitato altrimenti la schermata non si aggiorna.
// Get the next runtime object serial number before scripting
unsigned int first_sn = CRhinoObject::NextRuntimeObjectSerialNumber();
//aniello end
/////////////////////
CRhinoGetObject gc;
gc.SetCommandPrompt( L"SELECT LINE TO EXTEND" );
gc.SetGeometryFilter( CRhinoGetObject::curve_object );
gc.GetObjects( 1, 1 );
if(gc.CommandResult() == CRhinoCommand::success )
{
const CRhinoObjRef& objref = gc.Object(0);
const ON_Curve* pC = ON_Curve::Cast( objref.Geometry() );
ON_Curve* crv0 = pC->DuplicateCurve();
bool rc0 = RhinoExtendCurve(crv0, CRhinoExtend::Line, 1, 5);
bool rc1 = RhinoExtendCurve(crv0, CRhinoExtend::Line, 0, 15);
context.m_doc.ReplaceObject(objref, *crv0 );
context.m_doc.Redraw();
///// begin prova memorizzazione id o name linea pv
////ON_UUID uuid1 = gc->Attributes().m_uuid;
//// ON_UUID uuid1 = objref.ObjectUuid();
// //ON_UuidToString( uuid1, cvrPrima );
// const CRhinoObject* obj5 = objref.Object();
// ON_UUID uuid1 = obj5->Attributes().m_uuid;
// pvcurva = uuid1;
// ON_3dmObjectAttributes obj_attribs = obj5->Attributes();
// CRhinoGetString gs;
//gs.SetCommandPrompt( L"New object name" );
//gs.SetDefaultString( obj_attribs.m_name );
//gs.AcceptNothing( TRUE );
//gs.GetString();
//if( gs.CommandResult() != CRhinoCommand::success )
// return gs.CommandResult();
//// Get the string entered by the user
//ON_wString obj_name = gs.String();
//obj_name.TrimLeftAndRight();
//// Is name the same?
//if( obj_name.Compare(obj_attribs.m_name) == 0 )
// return CRhinoCommand::nothing;
// //ON_wString obj_name = (L"stringanome");
// obj_attribs.m_name = obj_name;
// context.m_doc.ModifyObjectAttributes( objref, obj_attribs );
///// end prova memorizzazione id o name linea pv
ON_3dPoint p0 = crv0->PointAtStart();
ON_3dPoint p1 = crv0->PointAtEnd();
CRhinoGetNumber gn;
//double default_value = 30;
gn.SetCommandPrompt( L"ENTER ANTERIOR ANGLE FOR EXTENSION in grad: " );
gn.SetCommandPromptDefault(L"30");
gn.SetDefaultNumber(30);
//gn.AcceptNothing(true);
gn.GetNumber();
double alphaAngle = gn.Number();
gn.SetCommandPrompt( L"ENTER ANTERIOR LENGTH FOR EXTENSION in mm: " );
gn.SetCommandPromptDefault(L"80");
gn.SetDefaultNumber(80);
gn.GetNumber();
double antLen = gn.Number();
gn.SetCommandPrompt( L"ENTER ANTERIOR FILLET RADIUS in mm: " );
gn.SetCommandPromptDefault(L"6");
gn.SetDefaultNumber(6);
gn.GetNumber();
double antRad = gn.Number();
gn.SetCommandPrompt( L"ENTER POSTERIOR ANGLE FOR EXTENSION default <ALPHA + 10°= 40°> : " );
gn.SetCommandPromptDefault(L"40");
gn.SetDefaultNumber(40);
gn.GetNumber();
double betaAngle = gn.Number();
gn.SetCommandPrompt( L"ENTER POSTERIOR LENGTH FOR EXTENSION in mm: " );
gn.SetCommandPromptDefault(L"80");
gn.SetDefaultNumber(80);
gn.GetNumber();
double posLen = gn.Number();
gn.SetCommandPrompt( L"ENTER POSTERIOR FILLET RADIUS in mm: " );
gn.SetCommandPromptDefault(L"13");
gn.SetDefaultNumber(13);
gn.GetNumber();
double posRad = gn.Number();
ON_3dPoint pointStart;
ON_3dPoint pointEnd;
//// Fillet radius
//double radius = 1.0;
// Do the fillet calculation
double t0 = 0.0, t1 = 0.0;
ON_Plane plane;
plane.plane_equation.y = 1.0;
pointStart = crv0->PointAtStart();
pointEnd = crv0->PointAtEnd();
ON_3dPoint point0((pointStart.x - posLen*cos(betaAngle*acos(-1.0)/180.0)), 0.0, (pointStart.z + posLen*sin(betaAngle*acos(-1.0)/180.0)));
ON_3dPoint point1((pointEnd.x + antLen*cos(alphaAngle*acos(-1.0)/180.0)), 0.0, (pointEnd.z - antLen*sin(alphaAngle*acos(-1.0)/180.0)));
/**********************************/
/*CREATE THE LINE CURVES TO FILLET*/
/**********************************/
ON_LineCurve curve0( pointStart, point0 ); //LINEA A SINISTRA IN FRONT VIEW
ON_LineCurve curve1( point1, pointEnd ); //LINEA A DESTRA IN FRONT VIEW
/***************************************************/
/*FILLET AT THE END/START POINTS OF THE LINE CURVES*/
/***************************************************/
double curve0_t = crv0->Domain().Max();
double curve1_t = curve1.Domain().Min();
ON_3dPoint PuntoAltezzaTacco = curve1.m_line.to;
AltezzaTacco = PuntoAltezzaTacco;
if( RhinoGetFilletPoints(curve1, *crv0, antRad, curve1_t, curve0_t, t1, t0, plane) )
{
/*******************************/
/*TRIM BACK THE TWO LINE CURVES*/
/*******************************/
ON_Interval domain1( curve1.Domain().Min(), t1 );
curve1.Trim( domain1 );
ON_Interval domain0( crv0->Domain().Min(), t0 );
crv0->Trim( domain0 );
/**************************/
/*COMPUTE THE FILLET CURVE*/
/**************************/
ON_3dVector radial0 = curve1.PointAt(t1) - plane.Origin();
radial0.Unitize();
ON_3dVector radial1 = crv0->PointAt(t0) - plane.Origin();
radial1.Unitize();
double angle = acos( radial0 * radial1 );
ON_Plane fillet_plane( plane.Origin(), radial0, radial1 );
ON_Arc fillet( fillet_plane, plane.Origin(), antRad, angle );
/******************/
/*ADD THE GEOMETRY*/
/******************/
context.m_doc.AddCurveObject( curve1 );
context.m_doc.ReplaceObject(objref, *crv0 );
context.m_doc.AddCurveObject( fillet );
context.m_doc.Redraw();
}
t0 = 0.0, t1 = 0.0;
/*FILLET AT THE START POINTS OF THE LINE CURVES*/
curve0_t = crv0->Domain().Min();
curve1_t = curve0.Domain().Min();
if( RhinoGetFilletPoints(curve0, *crv0, posRad, curve1_t, curve0_t, t1, t0, plane) )
{
// Trim back the two line curves
ON_Interval domain0( t1, curve0.Domain().Max() );
curve0.Trim( domain0 );
ON_Interval domain1( t0, crv0->Domain().Max() );
crv0->Trim( domain1 );
/*COMPUTE THE FILLET CURVE*/
ON_3dVector radial0 = curve0.PointAt(t1) - plane.Origin();
radial0.Unitize();
ON_3dVector radial1 = crv0->PointAt(t0) - plane.Origin();
radial1.Unitize();
double angle = acos( radial0 * radial1 );
ON_Plane fillet_plane( plane.Origin(), radial0, radial1 );
ON_Arc fillet( fillet_plane, plane.Origin(), posRad, angle );
/*ADD THE GEOMETRY*/
context.m_doc.AddCurveObject( curve0 );
context.m_doc.ReplaceObject(objref, *crv0 );
context.m_doc.AddCurveObject( fillet );
context.m_doc.Redraw();
}
/******************/
/*CLEAN UP OR LEAK*/
/******************/
delete crv0;
crv0 = 0;
// code temp
// aniello begin
// Get the next runtime object serial number after scripting
unsigned int next_sn = CRhinoObject::NextRuntimeObjectSerialNumber();
// Enable redrawing
//CRhinoView::EnableDrawing( TRUE );
// if the two are the same, then nothing happened
/* if( first_sn == next_sn )
//return CRhinoCommand::nothing;
return;
*/ //commento questo per far compilare :-)
// The the pointers of all of the objects that were added during scripting
ON_SimpleArray<const CRhinoObject*> objects;
for( unsigned int sn = first_sn; sn < next_sn; sn++ )
{
const CRhinoObject* obj = context.m_doc.LookupObjectByRuntimeSerialNumber( sn );
if( obj && !obj->IsDeleted() )
objects.Append( obj );
}
/*
// Sort and cull the list, as there may be duplicates
if( objects.Count() > 1 )
{
objects.HeapSort( CompareObjectPtr );
const CRhinoObject* last_obj = objects[objects.Count()-1];
for( int i = objects.Count()-2; i >= 0; i-- )
{
const CRhinoObject* prev_obj = objects[i];
if( last_obj == prev_obj )
objects.Remove(i);
else
last_obj = prev_obj;
}
}
*/
// Do something with the list...
for( int i = 0; i < objects.Count(); i++ )
{
const CRhinoObject* obj = objects[i];
if( obj->IsSelectable(true) )
obj->Select( true );
}
//aniello end
//end code temp
/*********************/
/*JOIN LINES TOGETHER*/
/*********************/
ON_SimpleArray<const ON_Curve*> lines;
ON_SimpleArray<CRhinoObject*> objectsLine;
ON_SimpleArray<ON_Curve*> output;
double tolerance = context.m_doc.AbsoluteTolerance();
int LinesCount = context.m_doc.LookupObject( layer, objectsLine);
if( LinesCount > 0 )
{
for(int i = 0; i < LinesCount; i++)
{
const CRhinoCurveObject* curve_obj = CRhinoCurveObject::Cast( objectsLine[i] );
if( curve_obj )
{
lines.Append(curve_obj->Curve());
}
}
}
if( RhinoMergeCurves(lines, output, tolerance) )
{
for(int i = 0; i < output.Count(); i++ )
{
CRhinoCurveObject* crv = new CRhinoCurveObject;
crv->SetCurve( output[i] );
if( context.m_doc.AddObject(crv) )
{
crv->Select();
}
else
{
delete crv;
}
}
}
/************************/
/*DELETE CHILDREN CURVES*/
/************************/
for(int i = 0; i < LinesCount; i++ )
{
context.m_doc.DeleteObject(objectsLine[i]);
}
context.m_doc.Redraw();
/*************************/
/*END JOIN LINES TOGETHER*/
/*************************/
}
}/*CHIUSURA IF( OBJECT_COUNT > 0 )*/
}/*CHIUSURA ELSE*/
return CRhinoCommand::success;
}
CRhinoCommand::result CTraslRuota::RunCommand( const CRhinoCommandContext& context )
{
Cscript1PlugIn& plugin = script1PlugIn();
if( !plugin.IsDlgVisible() )
{
return CRhinoCommand::nothing;
}
/*GET A REFERENCE TO THE LAYER TABLE*/
CRhinoLayerTable& layer_table = context.m_doc.m_layer_table;
ON_Layer currentLayer;
int numLayers = layer_table.LayerCount();
for(int i = 0; i < numLayers; i++)
{
currentLayer = layer_table[i];
const CRhinoLayer& layer = layer_table[i];
currentLayer.SetVisible(true);
layer_table.ModifyLayer(currentLayer, i);
layer_table.SetCurrentLayerIndex(i);
const CRhinoLayer& current_layer = layer_table.CurrentLayer();
int layer_index = layer_table.CurrentLayerIndex();
const CRhinoLayer& layer2 = layer_table[layer_index];
ON_SimpleArray<CRhinoObject*> obj_list;
int j, obj_count = context.m_doc.LookupObject( layer2, obj_list );
for( j = 0; j < obj_count; j++ )
{
CRhinoObject* obj = obj_list[j];
if( obj && obj->IsSelectable() )
obj->Select();
if( obj_count )
context.m_doc.Redraw();
}
}
context.m_doc.Redraw();
//inizio rotazione
double m_angle=(_wtof(plugin.m_dialog->ValoreRotazione));
ON_Plane plane = RhinoActiveCPlane();
CRhinoGetObject go1;
go1.GetObjects( 1, 0 );
int numero1 = go1.ObjectCount();
for( int k = 0; k < go1.ObjectCount(); k++ )
{
// Get an object reference
const CRhinoObjRef& ref = go1.Object(k);
// Get the real object
const CRhinoObject* obj = ref.Object();
if( !obj )
continue;
ON_Xform xform;
xform.Rotation( m_angle * ON_PI / 180.0, plane.zaxis, plane.Origin() );
context.m_doc.TransformObject( obj, xform, true, true, true );
context.m_doc.Redraw();
}
//fine rotazione
//inizio traslazione
CRhinoGetObject go;
int numero = go.ObjectCount();
go.GetObjects( 1, 0 );
for( int i = 0; i < go.ObjectCount(); i++ )
{
// Get an object reference
const CRhinoObjRef& ref = go.Object(i);
// Get the real object
const CRhinoObject* obj = ref.Object();
if( !obj )
continue;
ON_Xform xform;
xform.Rotation( m_angle * ON_PI / 180.0, plane.zaxis, plane.Origin() );
//context.m_doc.TransformObject( obj, xform, true, true, true );
context.m_doc.Redraw();
xform.Translation((_wtof(plugin.m_dialog->ValoreTraslazione)),0,0);
context.m_doc.TransformObject( obj, xform, true, true, true );
context.m_doc.Redraw();
}
// fine traslazione
context.m_doc.Redraw();
return CRhinoCommand::success;
}