// inner part of dive
int
CbcHeuristicDive::solution(double & solutionValue, int & numberNodes,
int & numberCuts, OsiRowCut ** cuts,
CbcSubProblem ** & nodes,
double * newSolution)
{
#ifdef DIVE_DEBUG
int nRoundInfeasible = 0;
int nRoundFeasible = 0;
#endif
int reasonToStop = 0;
double time1 = CoinCpuTime();
int numberSimplexIterations = 0;
int maxSimplexIterations = (model_->getNodeCount()) ? maxSimplexIterations_
: maxSimplexIterationsAtRoot_;
// but can't be exactly coin_int_max
maxSimplexIterations = CoinMin(maxSimplexIterations,COIN_INT_MAX>>3);
OsiSolverInterface * solver = cloneBut(6); // was model_->solver()->clone();
# ifdef COIN_HAS_CLP
OsiClpSolverInterface * clpSolver
= dynamic_cast<OsiClpSolverInterface *> (solver);
if (clpSolver) {
ClpSimplex * clpSimplex = clpSolver->getModelPtr();
int oneSolveIts = clpSimplex->maximumIterations();
oneSolveIts = CoinMin(1000+2*(clpSimplex->numberRows()+clpSimplex->numberColumns()),oneSolveIts);
clpSimplex->setMaximumIterations(oneSolveIts);
if (!nodes) {
// say give up easily
clpSimplex->setMoreSpecialOptions(clpSimplex->moreSpecialOptions() | 64);
} else {
// get ray
int specialOptions = clpSimplex->specialOptions();
specialOptions &= ~0x3100000;
specialOptions |= 32;
clpSimplex->setSpecialOptions(specialOptions);
clpSolver->setSpecialOptions(clpSolver->specialOptions() | 1048576);
if ((model_->moreSpecialOptions()&16777216)!=0) {
// cutoff is constraint
clpSolver->setDblParam(OsiDualObjectiveLimit, COIN_DBL_MAX);
}
}
}
# endif
const double * lower = solver->getColLower();
const double * upper = solver->getColUpper();
const double * rowLower = solver->getRowLower();
const double * rowUpper = solver->getRowUpper();
const double * solution = solver->getColSolution();
const double * objective = solver->getObjCoefficients();
double integerTolerance = model_->getDblParam(CbcModel::CbcIntegerTolerance);
double primalTolerance;
solver->getDblParam(OsiPrimalTolerance, primalTolerance);
int numberRows = matrix_.getNumRows();
assert (numberRows <= solver->getNumRows());
int numberIntegers = model_->numberIntegers();
const int * integerVariable = model_->integerVariable();
double direction = solver->getObjSense(); // 1 for min, -1 for max
double newSolutionValue = direction * solver->getObjValue();
int returnCode = 0;
// Column copy
const double * element = matrix_.getElements();
const int * row = matrix_.getIndices();
const CoinBigIndex * columnStart = matrix_.getVectorStarts();
const int * columnLength = matrix_.getVectorLengths();
#ifdef DIVE_FIX_BINARY_VARIABLES
// Row copy
const double * elementByRow = matrixByRow_.getElements();
const int * column = matrixByRow_.getIndices();
const CoinBigIndex * rowStart = matrixByRow_.getVectorStarts();
const int * rowLength = matrixByRow_.getVectorLengths();
#endif
// Get solution array for heuristic solution
int numberColumns = solver->getNumCols();
memcpy(newSolution, solution, numberColumns*sizeof(double));
// vectors to store the latest variables fixed at their bounds
int* columnFixed = new int [numberIntegers];
double* originalBound = new double [numberIntegers+2*numberColumns];
double * lowerBefore = originalBound+numberIntegers;
double * upperBefore = lowerBefore+numberColumns;
memcpy(lowerBefore,lower,numberColumns*sizeof(double));
memcpy(upperBefore,upper,numberColumns*sizeof(double));
double * lastDjs=newSolution+numberColumns;
bool * fixedAtLowerBound = new bool [numberIntegers];
PseudoReducedCost * candidate = new PseudoReducedCost [numberIntegers];
double * random = new double [numberIntegers];
int maxNumberAtBoundToFix = static_cast<int> (floor(percentageToFix_ * numberIntegers));
assert (!maxNumberAtBoundToFix||!nodes);
// count how many fractional variables
int numberFractionalVariables = 0;
for (int i = 0; i < numberIntegers; i++) {
random[i] = randomNumberGenerator_.randomDouble() + 0.3;
int iColumn = integerVariable[i];
double value = newSolution[iColumn];
if (fabs(floor(value + 0.5) - value) > integerTolerance) {
numberFractionalVariables++;
}
}
const double* reducedCost = NULL;
// See if not NLP
if (model_->solverCharacteristics()->reducedCostsAccurate())
reducedCost = solver->getReducedCost();
int iteration = 0;
while (numberFractionalVariables) {
iteration++;
// initialize any data
initializeData();
// select a fractional variable to bound
int bestColumn = -1;
int bestRound; // -1 rounds down, +1 rounds up
bool canRound = selectVariableToBranch(solver, newSolution,
bestColumn, bestRound);
// if the solution is not trivially roundable, we don't try to round;
// if the solution is trivially roundable, we try to round. However,
// if the rounded solution is worse than the current incumbent,
// then we don't round and proceed normally. In this case, the
// bestColumn will be a trivially roundable variable
if (canRound) {
// check if by rounding all fractional variables
// we get a solution with an objective value
// better than the current best integer solution
double delta = 0.0;
for (int i = 0; i < numberIntegers; i++) {
int iColumn = integerVariable[i];
double value = newSolution[iColumn];
if (fabs(floor(value + 0.5) - value) > integerTolerance) {
assert(downLocks_[i] == 0 || upLocks_[i] == 0);
double obj = objective[iColumn];
if (downLocks_[i] == 0 && upLocks_[i] == 0) {
if (direction * obj >= 0.0)
delta += (floor(value) - value) * obj;
else
delta += (ceil(value) - value) * obj;
} else if (downLocks_[i] == 0)
delta += (floor(value) - value) * obj;
else
delta += (ceil(value) - value) * obj;
}
}
if (direction*(solver->getObjValue() + delta) < solutionValue) {
#ifdef DIVE_DEBUG
nRoundFeasible++;
#endif
if (!nodes||bestColumn<0) {
// Round all the fractional variables
for (int i = 0; i < numberIntegers; i++) {
int iColumn = integerVariable[i];
double value = newSolution[iColumn];
if (fabs(floor(value + 0.5) - value) > integerTolerance) {
assert(downLocks_[i] == 0 || upLocks_[i] == 0);
if (downLocks_[i] == 0 && upLocks_[i] == 0) {
if (direction * objective[iColumn] >= 0.0)
newSolution[iColumn] = floor(value);
else
newSolution[iColumn] = ceil(value);
} else if (downLocks_[i] == 0)
newSolution[iColumn] = floor(value);
else
newSolution[iColumn] = ceil(value);
}
}
break;
} else {
// can't round if going to use in branching
int i;
for (i = 0; i < numberIntegers; i++) {
int iColumn = integerVariable[i];
double value = newSolution[bestColumn];
if (fabs(floor(value + 0.5) - value) > integerTolerance) {
if (iColumn==bestColumn) {
assert(downLocks_[i] == 0 || upLocks_[i] == 0);
double obj = objective[bestColumn];
if (downLocks_[i] == 0 && upLocks_[i] == 0) {
if (direction * obj >= 0.0)
bestRound=-1;
else
bestRound=1;
} else if (downLocks_[i] == 0)
bestRound=-1;
else
bestRound=1;
break;
}
}
}
}
}
#ifdef DIVE_DEBUG
else
nRoundInfeasible++;
#endif
}
// do reduced cost fixing
#ifdef DIVE_DEBUG
int numberFixed = reducedCostFix(solver);
std::cout << "numberReducedCostFixed = " << numberFixed << std::endl;
#else
reducedCostFix(solver);
#endif
int numberAtBoundFixed = 0;
#ifdef DIVE_FIX_BINARY_VARIABLES
// fix binary variables based on pseudo reduced cost
if (binVarIndex_.size()) {
int cnt = 0;
int n = static_cast<int>(binVarIndex_.size());
for (int j = 0; j < n; j++) {
int iColumn1 = binVarIndex_[j];
double value = newSolution[iColumn1];
if (fabs(value) <= integerTolerance &&
lower[iColumn1] != upper[iColumn1]) {
double maxPseudoReducedCost = 0.0;
#ifdef DIVE_DEBUG
std::cout << "iColumn1 = " << iColumn1 << ", value = " << value << std::endl;
#endif
int iRow = vbRowIndex_[j];
double chosenValue = 0.0;
for (int k = rowStart[iRow]; k < rowStart[iRow] + rowLength[iRow]; k++) {
int iColumn2 = column[k];
#ifdef DIVE_DEBUG
std::cout << "iColumn2 = " << iColumn2 << std::endl;
#endif
if (iColumn1 != iColumn2) {
double pseudoReducedCost = fabs(reducedCost[iColumn2] *
elementByRow[k]);
#ifdef DIVE_DEBUG
int k2;
for (k2 = rowStart[iRow]; k2 < rowStart[iRow] + rowLength[iRow]; k2++) {
if (column[k2] == iColumn1)
break;
}
std::cout << "reducedCost[" << iColumn2 << "] = "
<< reducedCost[iColumn2]
<< ", elementByRow[" << iColumn2 << "] = " << elementByRow[k]
<< ", elementByRow[" << iColumn1 << "] = " << elementByRow[k2]
<< ", pseudoRedCost = " << pseudoReducedCost
<< std::endl;
#endif
if (pseudoReducedCost > maxPseudoReducedCost)
maxPseudoReducedCost = pseudoReducedCost;
} else {
// save value
chosenValue = fabs(elementByRow[k]);
}
}
assert (chosenValue);
maxPseudoReducedCost /= chosenValue;
#ifdef DIVE_DEBUG
std::cout << ", maxPseudoRedCost = " << maxPseudoReducedCost << std::endl;
#endif
candidate[cnt].var = iColumn1;
candidate[cnt++].pseudoRedCost = maxPseudoReducedCost;
}
}
#ifdef DIVE_DEBUG
std::cout << "candidates for rounding = " << cnt << std::endl;
#endif
std::sort(candidate, candidate + cnt, compareBinaryVars);
for (int i = 0; i < cnt; i++) {
int iColumn = candidate[i].var;
if (numberAtBoundFixed < maxNumberAtBoundToFix) {
columnFixed[numberAtBoundFixed] = iColumn;
originalBound[numberAtBoundFixed] = upper[iColumn];
fixedAtLowerBound[numberAtBoundFixed] = true;
solver->setColUpper(iColumn, lower[iColumn]);
numberAtBoundFixed++;
if (numberAtBoundFixed == maxNumberAtBoundToFix)
break;
}
}
}
#endif
// fix other integer variables that are at their bounds
int cnt = 0;
#ifdef GAP
double gap = 1.0e30;
#endif
if (reducedCost && true) {
#ifndef JJF_ONE
cnt = fixOtherVariables(solver, solution, candidate, random);
#else
#ifdef GAP
double cutoff = model_->getCutoff() ;
if (cutoff < 1.0e20 && false) {
double direction = solver->getObjSense() ;
gap = cutoff - solver->getObjValue() * direction ;
gap *= 0.1; // Fix more if plausible
double tolerance;
solver->getDblParam(OsiDualTolerance, tolerance) ;
if (gap <= 0.0)
gap = tolerance;
gap += 100.0 * tolerance;
}
int nOverGap = 0;
#endif
int numberFree = 0;
int numberFixed = 0;
for (int i = 0; i < numberIntegers; i++) {
int iColumn = integerVariable[i];
if (upper[iColumn] > lower[iColumn]) {
numberFree++;
double value = newSolution[iColumn];
if (fabs(floor(value + 0.5) - value) <= integerTolerance) {
candidate[cnt].var = iColumn;
candidate[cnt++].pseudoRedCost =
fabs(reducedCost[iColumn] * random[i]);
#ifdef GAP
if (fabs(reducedCost[iColumn]) > gap)
nOverGap++;
#endif
}
} else {
numberFixed++;
}
}
#ifdef GAP
int nLeft = maxNumberAtBoundToFix - numberAtBoundFixed;
#ifdef CLP_INVESTIGATE4
printf("cutoff %g obj %g nover %d - %d free, %d fixed\n",
cutoff, solver->getObjValue(), nOverGap, numberFree, numberFixed);
#endif
if (nOverGap > nLeft && true) {
nOverGap = CoinMin(nOverGap, nLeft + maxNumberAtBoundToFix / 2);
maxNumberAtBoundToFix += nOverGap - nLeft;
}
#else
#ifdef CLP_INVESTIGATE4
printf("cutoff %g obj %g - %d free, %d fixed\n",
model_->getCutoff(), solver->getObjValue(), numberFree, numberFixed);
#endif
#endif
#endif
} else {
for (int i = 0; i < numberIntegers; i++) {
int iColumn = integerVariable[i];
if (upper[iColumn] > lower[iColumn]) {
double value = newSolution[iColumn];
if (fabs(floor(value + 0.5) - value) <= integerTolerance) {
candidate[cnt].var = iColumn;
candidate[cnt++].pseudoRedCost = numberIntegers - i;
}
}
}
}
std::sort(candidate, candidate + cnt, compareBinaryVars);
for (int i = 0; i < cnt; i++) {
int iColumn = candidate[i].var;
if (upper[iColumn] > lower[iColumn]) {
double value = newSolution[iColumn];
if (fabs(floor(value + 0.5) - value) <= integerTolerance &&
numberAtBoundFixed < maxNumberAtBoundToFix) {
// fix the variable at one of its bounds
if (fabs(lower[iColumn] - value) <= integerTolerance) {
columnFixed[numberAtBoundFixed] = iColumn;
originalBound[numberAtBoundFixed] = upper[iColumn];
fixedAtLowerBound[numberAtBoundFixed] = true;
solver->setColUpper(iColumn, lower[iColumn]);
numberAtBoundFixed++;
} else if (fabs(upper[iColumn] - value) <= integerTolerance) {
columnFixed[numberAtBoundFixed] = iColumn;
originalBound[numberAtBoundFixed] = lower[iColumn];
fixedAtLowerBound[numberAtBoundFixed] = false;
solver->setColLower(iColumn, upper[iColumn]);
numberAtBoundFixed++;
}
if (numberAtBoundFixed == maxNumberAtBoundToFix)
break;
}
}
}
#ifdef DIVE_DEBUG
std::cout << "numberAtBoundFixed = " << numberAtBoundFixed << std::endl;
#endif
double originalBoundBestColumn;
double bestColumnValue;
int whichWay;
if (bestColumn >= 0) {
bestColumnValue = newSolution[bestColumn];
if (bestRound < 0) {
originalBoundBestColumn = upper[bestColumn];
solver->setColUpper(bestColumn, floor(bestColumnValue));
whichWay=0;
} else {
originalBoundBestColumn = lower[bestColumn];
solver->setColLower(bestColumn, ceil(bestColumnValue));
whichWay=1;
}
} else {
break;
}
int originalBestRound = bestRound;
int saveModelOptions = model_->specialOptions();
while (1) {
model_->setSpecialOptions(saveModelOptions | 2048);
solver->resolve();
model_->setSpecialOptions(saveModelOptions);
if (!solver->isAbandoned()&&!solver->isIterationLimitReached()) {
numberSimplexIterations += solver->getIterationCount();
} else {
numberSimplexIterations = maxSimplexIterations + 1;
reasonToStop += 100;
break;
}
if (!solver->isProvenOptimal()) {
if (nodes) {
if (solver->isProvenPrimalInfeasible()) {
if (maxSimplexIterationsAtRoot_!=COIN_INT_MAX) {
// stop now
printf("stopping on first infeasibility\n");
break;
} else if (cuts) {
// can do conflict cut
printf("could do intermediate conflict cut\n");
bool localCut;
OsiRowCut * cut = model_->conflictCut(solver,localCut);
if (cut) {
if (!localCut) {
model_->makePartialCut(cut,solver);
cuts[numberCuts++]=cut;
} else {
delete cut;
}
}
}
} else {
reasonToStop += 10;
break;
}
}
if (numberAtBoundFixed > 0) {
// Remove the bound fix for variables that were at bounds
for (int i = 0; i < numberAtBoundFixed; i++) {
int iColFixed = columnFixed[i];
if (fixedAtLowerBound[i])
solver->setColUpper(iColFixed, originalBound[i]);
else
solver->setColLower(iColFixed, originalBound[i]);
}
numberAtBoundFixed = 0;
} else if (bestRound == originalBestRound) {
bestRound *= (-1);
whichWay |=2;
if (bestRound < 0) {
solver->setColLower(bestColumn, originalBoundBestColumn);
solver->setColUpper(bestColumn, floor(bestColumnValue));
} else {
solver->setColLower(bestColumn, ceil(bestColumnValue));
solver->setColUpper(bestColumn, originalBoundBestColumn);
}
} else
break;
} else
break;
}
if (!solver->isProvenOptimal() ||
direction*solver->getObjValue() >= solutionValue) {
reasonToStop += 1;
} else if (iteration > maxIterations_) {
reasonToStop += 2;
} else if (CoinCpuTime() - time1 > maxTime_) {
reasonToStop += 3;
} else if (numberSimplexIterations > maxSimplexIterations) {
reasonToStop += 4;
// also switch off
#ifdef CLP_INVESTIGATE
printf("switching off diving as too many iterations %d, %d allowed\n",
numberSimplexIterations, maxSimplexIterations);
#endif
when_ = 0;
} else if (solver->getIterationCount() > 1000 && iteration > 3 && !nodes) {
reasonToStop += 5;
// also switch off
#ifdef CLP_INVESTIGATE
printf("switching off diving one iteration took %d iterations (total %d)\n",
solver->getIterationCount(), numberSimplexIterations);
#endif
when_ = 0;
}
memcpy(newSolution, solution, numberColumns*sizeof(double));
numberFractionalVariables = 0;
double sumFractionalVariables=0.0;
for (int i = 0; i < numberIntegers; i++) {
int iColumn = integerVariable[i];
double value = newSolution[iColumn];
double away = fabs(floor(value + 0.5) - value);
if (away > integerTolerance) {
numberFractionalVariables++;
sumFractionalVariables += away;
}
}
if (nodes) {
// save information
//branchValues[numberNodes]=bestColumnValue;
//statuses[numberNodes]=whichWay+(bestColumn<<2);
//bases[numberNodes]=solver->getWarmStart();
ClpSimplex * simplex = clpSolver->getModelPtr();
CbcSubProblem * sub =
new CbcSubProblem(clpSolver,lowerBefore,upperBefore,
simplex->statusArray(),numberNodes);
nodes[numberNodes]=sub;
// other stuff
sub->branchValue_=bestColumnValue;
sub->problemStatus_=whichWay;
sub->branchVariable_=bestColumn;
sub->objectiveValue_ = simplex->objectiveValue();
sub->sumInfeasibilities_ = sumFractionalVariables;
sub->numberInfeasibilities_ = numberFractionalVariables;
printf("DiveNode %d column %d way %d bvalue %g obj %g\n",
numberNodes,sub->branchVariable_,sub->problemStatus_,
sub->branchValue_,sub->objectiveValue_);
numberNodes++;
if (solver->isProvenOptimal()) {
memcpy(lastDjs,solver->getReducedCost(),numberColumns*sizeof(double));
memcpy(lowerBefore,lower,numberColumns*sizeof(double));
memcpy(upperBefore,upper,numberColumns*sizeof(double));
}
}
if (!numberFractionalVariables||reasonToStop)
break;
}
if (nodes) {
printf("Exiting dive for reason %d\n",reasonToStop);
if (reasonToStop>1) {
printf("problems in diving\n");
int whichWay=nodes[numberNodes-1]->problemStatus_;
CbcSubProblem * sub;
if ((whichWay&2)==0) {
// leave both ways
sub = new CbcSubProblem(*nodes[numberNodes-1]);
nodes[numberNodes++]=sub;
} else {
sub = nodes[numberNodes-1];
}
if ((whichWay&1)==0)
sub->problemStatus_=whichWay|1;
else
sub->problemStatus_=whichWay&~1;
}
if (!numberNodes) {
// was good at start! - create fake
clpSolver->resolve();
ClpSimplex * simplex = clpSolver->getModelPtr();
CbcSubProblem * sub =
new CbcSubProblem(clpSolver,lowerBefore,upperBefore,
simplex->statusArray(),numberNodes);
nodes[numberNodes]=sub;
// other stuff
sub->branchValue_=0.0;
sub->problemStatus_=0;
sub->branchVariable_=-1;
sub->objectiveValue_ = simplex->objectiveValue();
sub->sumInfeasibilities_ = 0.0;
sub->numberInfeasibilities_ = 0;
printf("DiveNode %d column %d way %d bvalue %g obj %g\n",
numberNodes,sub->branchVariable_,sub->problemStatus_,
sub->branchValue_,sub->objectiveValue_);
numberNodes++;
assert (solver->isProvenOptimal());
}
nodes[numberNodes-1]->problemStatus_ |= 256*reasonToStop;
// use djs as well
if (solver->isProvenPrimalInfeasible()&&cuts) {
// can do conflict cut and re-order
printf("could do final conflict cut\n");
bool localCut;
OsiRowCut * cut = model_->conflictCut(solver,localCut);
if (cut) {
printf("cut - need to use conflict and previous djs\n");
if (!localCut) {
model_->makePartialCut(cut,solver);
cuts[numberCuts++]=cut;
} else {
delete cut;
}
} else {
printf("bad conflict - just use previous djs\n");
}
}
}
// re-compute new solution value
double objOffset = 0.0;
solver->getDblParam(OsiObjOffset, objOffset);
newSolutionValue = -objOffset;
for (int i = 0 ; i < numberColumns ; i++ )
newSolutionValue += objective[i] * newSolution[i];
newSolutionValue *= direction;
//printf("new solution value %g %g\n",newSolutionValue,solutionValue);
if (newSolutionValue < solutionValue && !reasonToStop) {
double * rowActivity = new double[numberRows];
memset(rowActivity, 0, numberRows*sizeof(double));
// paranoid check
memset(rowActivity, 0, numberRows*sizeof(double));
for (int i = 0; i < numberColumns; i++) {
int j;
double value = newSolution[i];
if (value) {
for (j = columnStart[i];
j < columnStart[i] + columnLength[i]; j++) {
int iRow = row[j];
rowActivity[iRow] += value * element[j];
}
}
}
// check was approximately feasible
bool feasible = true;
for (int i = 0; i < numberRows; i++) {
if (rowActivity[i] < rowLower[i]) {
if (rowActivity[i] < rowLower[i] - 1000.0*primalTolerance)
feasible = false;
} else if (rowActivity[i] > rowUpper[i]) {
if (rowActivity[i] > rowUpper[i] + 1000.0*primalTolerance)
feasible = false;
}
}
for (int i = 0; i < numberIntegers; i++) {
int iColumn = integerVariable[i];
double value = newSolution[iColumn];
if (fabs(floor(value + 0.5) - value) > integerTolerance) {
feasible = false;
break;
}
}
if (feasible) {
// new solution
solutionValue = newSolutionValue;
//printf("** Solution of %g found by CbcHeuristicDive\n",newSolutionValue);
//if (cuts)
//clpSolver->getModelPtr()->writeMps("good8.mps", 2);
returnCode = 1;
} else {
// Can easily happen
//printf("Debug CbcHeuristicDive giving bad solution\n");
}
delete [] rowActivity;
}
#ifdef DIVE_DEBUG
std::cout << "nRoundInfeasible = " << nRoundInfeasible
<< ", nRoundFeasible = " << nRoundFeasible
<< ", returnCode = " << returnCode
<< ", reasonToStop = " << reasonToStop
<< ", simplexIts = " << numberSimplexIterations
<< ", iterations = " << iteration << std::endl;
#endif
delete [] columnFixed;
delete [] originalBound;
delete [] fixedAtLowerBound;
delete [] candidate;
delete [] random;
delete [] downArray_;
downArray_ = NULL;
delete [] upArray_;
upArray_ = NULL;
delete solver;
return returnCode;
}
int main (int argc, const char *argv[])
{
// Define your favorite OsiSolver
OsiClpSolverInterface solver1;
// Read in model using argv[1]
// and assert that it is a clean model
std::string mpsFileName;
#if defined(SAMPLEDIR)
mpsFileName = SAMPLEDIR "/p0033.mps";
#else
if (argc < 2) {
fprintf(stderr, "Do not know where to find sample MPS files.\n");
exit(1);
}
#endif
if (argc>=2) mpsFileName = argv[1];
int numMpsReadErrors = solver1.readMps(mpsFileName.c_str(),"");
assert(numMpsReadErrors==0);
double time1 = CoinCpuTime();
OsiClpSolverInterface solverSave = solver1;
/* Options are:
preprocess to do preprocessing
time in minutes
if 2 parameters and numeric taken as time
*/
bool preProcess=false;
double minutes=-1.0;
int nGoodParam=0;
for (int iParam=2; iParam<argc;iParam++) {
if (!strcmp(argv[iParam],"preprocess")) {
preProcess=true;
nGoodParam++;
} else if (!strcmp(argv[iParam],"time")) {
if (iParam+1<argc&&isdigit(argv[iParam+1][0])) {
minutes=atof(argv[iParam+1]);
if (minutes>=0.0) {
nGoodParam+=2;
iParam++; // skip time
}
}
}
}
if (nGoodParam==0&&argc==3&&isdigit(argv[2][0])) {
// If time is given then stop after that number of minutes
minutes = atof(argv[2]);
if (minutes>=0.0)
nGoodParam=1;
}
if (nGoodParam!=argc-2&&argc>=2) {
printf("Usage <file> [preprocess] [time <minutes>] or <file> <minutes>\n");
exit(1);
}
// Reduce printout
solver1.setHintParam(OsiDoReducePrint,true,OsiHintTry);
// See if we want preprocessing
OsiSolverInterface * solver2=&solver1;
CglPreProcess process;
// Never do preprocessing until dual tests out as can fix incorrectly
preProcess=false;
if (preProcess) {
/* Do not try and produce equality cliques and
do up to 5 passes */
solver2 = process.preProcess(solver1,false,5);
if (!solver2) {
printf("Pre-processing says infeasible\n");
exit(2);
}
solver2->resolve();
}
// Turn L rows into cuts
CglStoredUser stored;
{
int numberRows = solver2->getNumRows();
int * whichRow = new int[numberRows];
// get row copy
const CoinPackedMatrix * rowCopy = solver2->getMatrixByRow();
const int * column = rowCopy->getIndices();
const int * rowLength = rowCopy->getVectorLengths();
const CoinBigIndex * rowStart = rowCopy->getVectorStarts();
const double * rowLower = solver2->getRowLower();
const double * rowUpper = solver2->getRowUpper();
const double * element = rowCopy->getElements();
int iRow,nDelete=0;
for (iRow=0;iRow<numberRows;iRow++) {
if (rowLower[iRow]<-1.0e20||rowUpper[iRow]>1.0e20) {
// take out
whichRow[nDelete++]=iRow;
}
}
// leave some rows to avoid empty problem (Gomory does not like)
nDelete = CoinMax(CoinMin(nDelete,numberRows-5),0);
for (int jRow=0;jRow<nDelete;jRow++) {
iRow=whichRow[jRow];
int start = rowStart[iRow];
stored.addCut(rowLower[iRow],rowUpper[iRow],rowLength[iRow],
column+start,element+start);
}
/* The following is problem specific.
Normally cuts are deleted if slack on cut basic.
On some problems you may wish to leave cuts in as long
as slack value zero
*/
int numberCuts=stored.sizeRowCuts();
for (int iCut=0;iCut<numberCuts;iCut++) {
//stored.mutableRowCutPointer(iCut)->setEffectiveness(1.0e50);
}
solver2->deleteRows(nDelete,whichRow);
delete [] whichRow;
}
CbcModel model(*solver2);
model.solver()->setHintParam(OsiDoReducePrint,true,OsiHintTry);
// Set up some cut generators and defaults
// Probing first as gets tight bounds on continuous
CglProbing generator1;
generator1.setUsingObjective(true);
generator1.setMaxPass(1);
generator1.setMaxPassRoot(5);
// Number of unsatisfied variables to look at
generator1.setMaxProbe(10);
generator1.setMaxProbeRoot(1000);
// How far to follow the consequences
generator1.setMaxLook(50);
generator1.setMaxLookRoot(500);
// Only look at rows with fewer than this number of elements
generator1.setMaxElements(200);
generator1.setRowCuts(3);
CglGomory generator2;
// try larger limit
generator2.setLimit(300);
CglKnapsackCover generator3;
CglRedSplit generator4;
// try larger limit
generator4.setLimit(200);
CglClique generator5;
generator5.setStarCliqueReport(false);
generator5.setRowCliqueReport(false);
CglMixedIntegerRounding2 mixedGen;
CglFlowCover flowGen;
// Add in generators
// Experiment with -1 and -99 etc
// This is just for one particular model
model.addCutGenerator(&generator1,-1,"Probing");
//model.addCutGenerator(&generator2,-1,"Gomory");
model.addCutGenerator(&generator2,1,"Gomory");
model.addCutGenerator(&generator3,-1,"Knapsack");
// model.addCutGenerator(&generator4,-1,"RedSplit");
//model.addCutGenerator(&generator5,-1,"Clique");
model.addCutGenerator(&generator5,1,"Clique");
model.addCutGenerator(&flowGen,-1,"FlowCover");
model.addCutGenerator(&mixedGen,-1,"MixedIntegerRounding");
// Add stored cuts (making sure at all depths)
model.addCutGenerator(&stored,1,"Stored",true,false,false,-100,1,-1);
int numberGenerators = model.numberCutGenerators();
int iGenerator;
// Say we want timings
for (iGenerator=0;iGenerator<numberGenerators;iGenerator++) {
CbcCutGenerator * generator = model.cutGenerator(iGenerator);
generator->setTiming(true);
}
OsiClpSolverInterface * osiclp = dynamic_cast< OsiClpSolverInterface*> (model.solver());
// go faster stripes
if (osiclp) {
if(osiclp->getNumRows()<300&&osiclp->getNumCols()<500) {
//osiclp->setupForRepeatedUse(2,0);
osiclp->setupForRepeatedUse(0,0);
}
// Don't allow dual stuff
osiclp->setSpecialOptions(osiclp->specialOptions()|262144);
}
// Uncommenting this should switch off all CBC messages
// model.messagesPointer()->setDetailMessages(10,10000,NULL);
// No heuristics
// Do initial solve to continuous
model.initialSolve();
/* You need the next few lines -
a) so that cut generator will always be called again if it generated cuts
b) it is known that matrix is not enough to define problem so do cuts even
if it looks integer feasible at continuous optimum.
c) a solution found by strong branching will be ignored.
d) don't recompute a solution once found
*/
// Make sure cut generator called correctly (a)
iGenerator=numberGenerators-1;
model.cutGenerator(iGenerator)->setMustCallAgain(true);
// Say cuts needed at continuous (b)
OsiBabSolver oddCuts;
oddCuts.setSolverType(4);
// owing to bug must set after initialSolve
model.passInSolverCharacteristics(&oddCuts);
// Say no to all solutions by strong branching (c)
CbcFeasibilityNoStrong noStrong;
model.setProblemFeasibility(noStrong);
// Say don't recompute solution d)
model.setSpecialOptions(4);
// Could tune more
double objValue = model.solver()->getObjSense()*model.solver()->getObjValue();
double minimumDropA=CoinMin(1.0,fabs(objValue)*1.0e-3+1.0e-4);
double minimumDrop= fabs(objValue)*1.0e-4+1.0e-4;
printf("min drop %g (A %g)\n",minimumDrop,minimumDropA);
model.setMinimumDrop(minimumDrop);
if (model.getNumCols()<500)
model.setMaximumCutPassesAtRoot(-100); // always do 100 if possible
else if (model.getNumCols()<5000)
model.setMaximumCutPassesAtRoot(100); // use minimum drop
else
model.setMaximumCutPassesAtRoot(20);
model.setMaximumCutPasses(10);
//model.setMaximumCutPasses(2);
// Switch off strong branching if wanted
// model.setNumberStrong(0);
// Do more strong branching if small
if (model.getNumCols()<5000)
model.setNumberStrong(10);
model.setNumberStrong(20);
//model.setNumberStrong(5);
model.setNumberBeforeTrust(5);
model.solver()->setIntParam(OsiMaxNumIterationHotStart,100);
// If time is given then stop after that number of minutes
if (minutes>=0.0) {
std::cout<<"Stopping after "<<minutes<<" minutes"<<std::endl;
model.setDblParam(CbcModel::CbcMaximumSeconds,60.0*minutes);
}
// Switch off most output
if (model.getNumCols()<30000) {
model.messageHandler()->setLogLevel(1);
//model.solver()->messageHandler()->setLogLevel(0);
} else {
model.messageHandler()->setLogLevel(2);
model.solver()->messageHandler()->setLogLevel(1);
}
//model.messageHandler()->setLogLevel(2);
//model.solver()->messageHandler()->setLogLevel(2);
//model.setPrintFrequency(50);
//#define DEBUG_CUTS
#ifdef DEBUG_CUTS
// Set up debugger by name (only if no preprocesing)
if (!preProcess) {
std::string problemName ;
model.solver()->getStrParam(OsiProbName,problemName) ;
model.solver()->activateRowCutDebugger(problemName.c_str()) ;
}
#endif
// Do complete search
model.branchAndBound();
std::cout<<mpsFileName<<" took "<<CoinCpuTime()-time1<<" seconds, "
<<model.getNodeCount()<<" nodes with objective "
<<model.getObjValue()
<<(!model.status() ? " Finished" : " Not finished")
<<std::endl;
// Print more statistics
std::cout<<"Cuts at root node changed objective from "<<model.getContinuousObjective()
<<" to "<<model.rootObjectiveAfterCuts()<<std::endl;
for (iGenerator=0;iGenerator<numberGenerators;iGenerator++) {
CbcCutGenerator * generator = model.cutGenerator(iGenerator);
std::cout<<generator->cutGeneratorName()<<" was tried "
<<generator->numberTimesEntered()<<" times and created "
<<generator->numberCutsInTotal()<<" cuts of which "
<<generator->numberCutsActive()<<" were active after adding rounds of cuts";
if (generator->timing())
std::cout<<" ( "<<generator->timeInCutGenerator()<<" seconds)"<<std::endl;
else
std::cout<<std::endl;
}
// Print solution if finished - we can't get names from Osi! - so get from OsiClp
if (model.getMinimizationObjValue()<1.0e50) {
// post process
OsiSolverInterface * solver;
if (preProcess) {
process.postProcess(*model.solver());
// Solution now back in solver1
solver = & solver1;
} else {
solver = model.solver();
}
int numberColumns = solver->getNumCols();
const double * solution = solver->getColSolution();
// Get names from solver1 (as OsiSolverInterface may lose)
std::vector<std::string> columnNames = *solver1.getModelPtr()->columnNames();
int iColumn;
std::cout<<std::setiosflags(std::ios::fixed|std::ios::showpoint)<<std::setw(14);
std::cout<<"--------------------------------------"<<std::endl;
for (iColumn=0;iColumn<numberColumns;iColumn++) {
double value=solution[iColumn];
if (fabs(value)>1.0e-7&&solver->isInteger(iColumn)) {
std::cout<<std::setw(6)<<iColumn<<" "
<<columnNames[iColumn]<<" "
<<value<<std::endl;
solverSave.setColLower(iColumn,value);
solverSave.setColUpper(iColumn,value);
}
}
std::cout<<"--------------------------------------"<<std::endl;
std::cout<<std::resetiosflags(std::ios::fixed|std::ios::showpoint|std::ios::scientific);
solverSave.initialSolve();
}
return 0;
}