void FOOTPRINT_EDIT_FRAME::setupTools()
{
PCB_DRAW_PANEL_GAL* drawPanel = static_cast<PCB_DRAW_PANEL_GAL*>( GetGalCanvas() );
// Create the manager and dispatcher & route draw panel events to the dispatcher
m_toolManager = new TOOL_MANAGER;
m_toolManager->SetEnvironment( GetBoard(), drawPanel->GetView(),
drawPanel->GetViewControls(), this );
m_toolDispatcher = new TOOL_DISPATCHER( m_toolManager );
drawPanel->SetEventDispatcher( m_toolDispatcher );
m_toolManager->RegisterTool( new SELECTION_TOOL );
m_toolManager->RegisterTool( new EDIT_TOOL );
m_toolManager->RegisterTool( new DRAWING_TOOL );
m_toolManager->RegisterTool( new POINT_EDITOR );
m_toolManager->RegisterTool( new PCBNEW_CONTROL );
m_toolManager->RegisterTool( new MODULE_TOOLS );
m_toolManager->RegisterTool( new PLACEMENT_TOOL );
m_toolManager->RegisterTool( new PICKER_TOOL );
m_toolManager->GetTool<SELECTION_TOOL>()->EditModules( true );
m_toolManager->GetTool<EDIT_TOOL>()->EditModules( true );
m_toolManager->GetTool<DRAWING_TOOL>()->EditModules( true );
m_toolManager->ResetTools( TOOL_BASE::RUN );
m_toolManager->InvokeTool( "pcbnew.InteractiveSelection" );
}
void PCB_BASE_EDIT_FRAME::SetBoard( BOARD* aBoard )
{
bool new_board = ( aBoard != m_Pcb );
// The active tool might store a reference to the BOARD that is about to be deleted.
if( m_toolManager )
m_toolManager->DeactivateTool();
// It has to be done before the previous board is destroyed by SetBoard()
if( new_board )
GetGalCanvas()->GetView()->Clear();
PCB_BASE_FRAME::SetBoard( aBoard );
GetGalCanvas()->GetGAL()->SetGridOrigin( VECTOR2D( aBoard->GetGridOrigin() ) );
// update the tool manager with the new board and its view.
if( m_toolManager )
{
PCB_DRAW_PANEL_GAL* drawPanel = static_cast<PCB_DRAW_PANEL_GAL*>( GetGalCanvas() );
drawPanel->DisplayBoard( aBoard );
m_toolManager->SetEnvironment( aBoard, drawPanel->GetView(),
drawPanel->GetViewControls(), this );
if( new_board )
m_toolManager->ResetTools( TOOL_BASE::MODEL_RELOAD );
}
}
void PCB_BASE_EDIT_FRAME::SetBoard( BOARD* aBoard )
{
bool new_board = ( aBoard != m_Pcb );
// It has to be done before the previous board is destroyed by SetBoard()
if( new_board )
GetGalCanvas()->GetView()->Clear();
PCB_BASE_FRAME::SetBoard( aBoard );
// update the tool manager with the new board and its view.
if( m_toolManager )
{
PCB_DRAW_PANEL_GAL* drawPanel = static_cast<PCB_DRAW_PANEL_GAL*>( GetGalCanvas() );
drawPanel->DisplayBoard( aBoard );
m_toolManager->SetEnvironment( aBoard, drawPanel->GetView(),
drawPanel->GetViewControls(), this );
if( new_board )
m_toolManager->ResetTools( TOOL_BASE::MODEL_RELOAD );
}
}
void PCB_EDIT_FRAME::SetBoard( BOARD* aBoard )
{
PCB_BASE_FRAME::SetBoard( aBoard );
if( IsGalCanvasActive() )
{
PCB_DRAW_PANEL_GAL* drawPanel = static_cast<PCB_DRAW_PANEL_GAL*>( GetGalCanvas() );
drawPanel->DisplayBoard( aBoard );
aBoard->GetRatsnest()->Recalculate();
// Prepare worksheet template
KIGFX::WORKSHEET_VIEWITEM* worksheet;
worksheet = new KIGFX::WORKSHEET_VIEWITEM( &aBoard->GetPageSettings(),
&aBoard->GetTitleBlock() );
worksheet->SetSheetName( std::string( GetScreenDesc().mb_str() ) );
BASE_SCREEN* screen = GetScreen();
if( screen != NULL )
{
worksheet->SetSheetNumber( screen->m_ScreenNumber );
worksheet->SetSheetCount( screen->m_NumberOfScreens );
}
// PCB_DRAW_PANEL_GAL takes ownership of the worksheet
drawPanel->SetWorksheet( worksheet );
// update the tool manager with the new board and its view.
if( m_toolManager )
{
m_toolManager->SetEnvironment( aBoard, drawPanel->GetView(),
drawPanel->GetViewControls(), this );
m_toolManager->ResetTools( TOOL_BASE::MODEL_RELOAD );
}
}
}
FOOTPRINT_VIEWER_FRAME::FOOTPRINT_VIEWER_FRAME( KIWAY* aKiway, wxWindow* aParent, FRAME_T aFrameType ) :
PCB_BASE_FRAME( aKiway, aParent, aFrameType, _( "Footprint Library Browser" ),
wxDefaultPosition, wxDefaultSize,
aFrameType == FRAME_PCB_MODULE_VIEWER_MODAL ?
aParent ?
KICAD_DEFAULT_DRAWFRAME_STYLE | MODAL_MODE_EXTRASTYLE
: KICAD_DEFAULT_DRAWFRAME_STYLE | wxSTAY_ON_TOP
: KICAD_DEFAULT_DRAWFRAME_STYLE,
aFrameType == FRAME_PCB_MODULE_VIEWER_MODAL ?
FOOTPRINT_VIEWER_FRAME_NAME_MODAL
: FOOTPRINT_VIEWER_FRAME_NAME )
{
wxASSERT( aFrameType == FRAME_PCB_MODULE_VIEWER_MODAL ||
aFrameType == FRAME_PCB_MODULE_VIEWER );
if( aFrameType == FRAME_PCB_MODULE_VIEWER_MODAL )
SetModal( true );
// Force the frame name used in config. the footprint viewer frame has a name
// depending on aFrameType (needed to identify the frame by wxWidgets),
// but only one configuration is preferable.
m_configFrameName = FOOTPRINT_VIEWER_FRAME_NAME;
m_showAxis = true; // true to draw axis.
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( modview_icon_xpm ) );
SetIcon( icon );
m_hotkeysDescrList = g_Module_Viewer_Hokeys_Descr;
m_libList = new wxListBox( this, ID_MODVIEW_LIB_LIST,
wxDefaultPosition, wxDefaultSize, 0, NULL, wxLB_HSCROLL );
m_footprintList = new wxListBox( this, ID_MODVIEW_FOOTPRINT_LIST,
wxDefaultPosition, wxDefaultSize, 0, NULL, wxLB_HSCROLL );
SetBoard( new BOARD() );
// In viewer, the default net clearance is not known (it depends on the actual board).
// So we do not show the default clearance, by setting it to 0
// The footprint or pad specific clearance will be shown
GetBoard()->GetDesignSettings().GetDefault()->SetClearance(0);
// Ensure all layers and items are visible:
GetBoard()->SetVisibleAlls();
SetScreen( new PCB_SCREEN( GetPageSizeIU() ) );
GetScreen()->m_Center = true; // Center coordinate origins on screen.
LoadSettings( config() );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
// Menu bar is not mandatory: uncomment/comment the next line
// to add/remove the menubar
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateVToolbar();
ReCreateLibraryList();
UpdateTitle();
PCB_BASE_FRAME* parentFrame = static_cast<PCB_BASE_FRAME*>( Kiway().Player( FRAME_PCB, true ) );
// Create GAL canvas
PCB_DRAW_PANEL_GAL* drawPanel = new PCB_DRAW_PANEL_GAL( this, -1, wxPoint( 0, 0 ), m_FrameSize,
parentFrame->GetGalCanvas()->GetBackend() );
SetGalCanvas( drawPanel );
// Create the manager and dispatcher & route draw panel events to the dispatcher
m_toolManager = new TOOL_MANAGER;
m_toolManager->SetEnvironment( GetBoard(), drawPanel->GetView(),
drawPanel->GetViewControls(), this );
m_toolDispatcher = new TOOL_DISPATCHER( m_toolManager );
drawPanel->SetEventDispatcher( m_toolDispatcher );
m_toolManager->RegisterTool( new PCBNEW_CONTROL );
m_toolManager->ResetTools( TOOL_BASE::RUN );
// If a footprint was previously loaded, reload it
if( getCurNickname().size() && getCurFootprintName().size() )
{
FPID id;
id.SetLibNickname( getCurNickname() );
id.SetFootprintName( getCurFootprintName() );
GetBoard()->Add( loadFootprint( id ) );
}
drawPanel->DisplayBoard( m_Pcb );
updateView();
m_auimgr.SetManagedWindow( this );
wxSize minsize(100,-1); // Min size of list boxes
// Main toolbar is initially docked at the top of the main window and dockable on any side.
// The close button is disable because the footprint viewer has no main menu to re-enable it.
// The tool bar will only be dockable on the top or bottom of the main frame window. This is
// most likely due to the fact that the other windows are not dockable and are preventing the
// tool bar from docking on the right and left.
wxAuiPaneInfo toolbarPaneInfo;
toolbarPaneInfo.Name( wxT( "m_mainToolBar" ) ).ToolbarPane().Top().CloseButton( false );
EDA_PANEINFO info;
info.InfoToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
// Manage main toolbar, top pane
m_auimgr.AddPane( m_mainToolBar, toolbarPaneInfo );
// Manage the list of libraries, left pane.
m_auimgr.AddPane( m_libList,
wxAuiPaneInfo( info ).Name( wxT( "m_libList" ) )
.Left().Row( 1 ).MinSize( minsize ) );
// Manage the list of footprints, center pane.
m_auimgr.AddPane( m_footprintList,
wxAuiPaneInfo( info ).Name( wxT( "m_footprintList" ) )
.Left().Row( 2 ).MinSize( minsize ) );
// Manage the draw panel, right pane.
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
m_auimgr.AddPane( (wxWindow*) GetGalCanvas(),
wxAuiPaneInfo().Name( wxT( "DrawFrameGal" ) ).CentrePane().Hide() );
// Manage the message panel, bottom pane.
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom() );
if( !m_perspective.IsEmpty() )
{
// Restore last saved sizes, pos and other params
// However m_mainToolBar size cannot be set to its last saved size
// because the actual size change depending on the way modview was called:
// the tool to export the current footprint exist or not.
// and the saved size is not always OK
// the trick is to get the default toolbar size, and set the size after
// calling LoadPerspective
wxSize tbsize = m_mainToolBar->GetSize();
m_auimgr.LoadPerspective( m_perspective, false );
m_auimgr.GetPane( m_mainToolBar ).BestSize( tbsize );
}
// after changing something to the aui manager,
// call Update()() to reflect the changes
m_auimgr.Update();
// Now Drawpanel is sized, we can use BestZoom to show the component (if any)
#ifdef USE_WX_GRAPHICS_CONTEXT
GetScreen()->SetZoom( BestZoom() );
#else
Zoom_Automatique( false );
#endif
UseGalCanvas( parentFrame->IsGalCanvasActive() );
if( !IsModal() ) // For modal mode, calling ShowModal() will show this frame
{
Raise(); // On some window managers, this is needed
Show( true );
}
}
FOOTPRINT_VIEWER_FRAME::FOOTPRINT_VIEWER_FRAME( KIWAY* aKiway, wxWindow* aParent,
FRAME_T aFrameType ) :
PCB_BASE_FRAME( aKiway, aParent, aFrameType, _( "Footprint Library Browser" ),
wxDefaultPosition, wxDefaultSize,
aFrameType == FRAME_PCB_MODULE_VIEWER_MODAL ? ( aParent ? PARENT_STYLE : MODAL_STYLE )
: NONMODAL_STYLE,
aFrameType == FRAME_PCB_MODULE_VIEWER_MODAL ? FOOTPRINT_VIEWER_FRAME_NAME_MODAL
: FOOTPRINT_VIEWER_FRAME_NAME )
{
wxASSERT( aFrameType == FRAME_PCB_MODULE_VIEWER_MODAL ||
aFrameType == FRAME_PCB_MODULE_VIEWER );
if( aFrameType == FRAME_PCB_MODULE_VIEWER_MODAL )
SetModal( true );
// Force the frame name used in config. the footprint viewer frame has a name
// depending on aFrameType (needed to identify the frame by wxWidgets),
// but only one configuration is preferable.
m_configFrameName = FOOTPRINT_VIEWER_FRAME_NAME;
m_showAxis = true; // true to draw axis.
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( modview_icon_xpm ) );
SetIcon( icon );
m_hotkeysDescrList = g_Module_Viewer_Hotkeys_Descr;
m_libList = new wxListBox( this, ID_MODVIEW_LIB_LIST, wxDefaultPosition, wxDefaultSize,
0, NULL, wxLB_HSCROLL | wxNO_BORDER );
m_footprintList = new wxListBox( this, ID_MODVIEW_FOOTPRINT_LIST, wxDefaultPosition, wxDefaultSize,
0, NULL, wxLB_HSCROLL | wxNO_BORDER );
SetBoard( new BOARD() );
// In viewer, the default net clearance is not known (it depends on the actual board).
// So we do not show the default clearance, by setting it to 0
// The footprint or pad specific clearance will be shown
GetBoard()->GetDesignSettings().GetDefault()->SetClearance(0);
// Don't show the default board solder mask clearance in the footprint viewer. Only the
// footprint or pad clearance setting should be shown if it is not 0.
GetBoard()->GetDesignSettings().m_SolderMaskMargin = 0;
// Ensure all layers and items are visible:
GetBoard()->SetVisibleAlls();
SetScreen( new PCB_SCREEN( GetPageSizeIU() ) );
GetScreen()->m_Center = true; // Center coordinate origins on screen.
LoadSettings( config() );
GetGalDisplayOptions().m_axesEnabled = true;
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
// Menu bar is not mandatory: uncomment/comment the next line
// to add/remove the menubar
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateVToolbar();
ReCreateLibraryList();
UpdateTitle();
// Create GAL canvas
PCB_DRAW_PANEL_GAL* drawPanel = new PCB_DRAW_PANEL_GAL( this, -1, wxPoint( 0, 0 ), m_FrameSize,
GetGalDisplayOptions(),
LoadCanvasTypeSetting() );
SetGalCanvas( drawPanel );
// Create the manager and dispatcher & route draw panel events to the dispatcher
m_toolManager = new TOOL_MANAGER;
m_toolManager->SetEnvironment( GetBoard(), drawPanel->GetView(),
drawPanel->GetViewControls(), this );
m_actions = new PCB_ACTIONS();
m_toolDispatcher = new TOOL_DISPATCHER( m_toolManager, m_actions );
drawPanel->SetEventDispatcher( m_toolDispatcher );
m_toolManager->RegisterTool( new PCBNEW_CONTROL );
m_toolManager->RegisterTool( new SELECTION_TOOL ); // for std context menus (zoom & grid)
m_toolManager->RegisterTool( new COMMON_TOOLS );
m_toolManager->InitTools();
m_toolManager->InvokeTool( "pcbnew.InteractiveSelection" );
// If a footprint was previously loaded, reload it
if( getCurNickname().size() && getCurFootprintName().size() )
{
LIB_ID id;
id.SetLibNickname( getCurNickname() );
id.SetLibItemName( getCurFootprintName() );
GetBoard()->Add( loadFootprint( id ) );
}
drawPanel->DisplayBoard( m_Pcb );
m_auimgr.SetManagedWindow( this );
m_auimgr.SetArtProvider( new EDA_DOCKART( this ) );
// Horizontal items; layers 4 - 6
m_auimgr.AddPane( m_mainToolBar, EDA_PANE().VToolbar().Name( "MainToolbar" ).Top().Layer(6) );
m_auimgr.AddPane( m_messagePanel, EDA_PANE().Messages().Name( "MsgPanel" ).Bottom().Layer(6) );
// Vertical items; layers 1 - 3
m_auimgr.AddPane( m_libList, EDA_PANE().Palette().Name( "Libraries" ).Left().Layer(2)
.CaptionVisible( false ).MinSize( 100, -1 ).BestSize( 200, -1 ) );
m_auimgr.AddPane( m_footprintList, EDA_PANE().Palette().Name( "Footprints" ).Left().Layer(1)
.CaptionVisible( false ).MinSize( 100, -1 ).BestSize( 300, -1 ) );
m_auimgr.AddPane( m_canvas, EDA_PANE().Canvas().Name( "DrawFrame" ).Center() );
m_auimgr.AddPane( GetGalCanvas(), EDA_PANE().Canvas().Name( "DrawFrameGal" ).Center().Hide() );
// after changing something to the aui manager,
// call Update()() to reflect the changes
m_auimgr.Update();
GetGalCanvas()->GetGAL()->SetAxesEnabled( true );
UseGalCanvas( true );
// Restore last zoom. (If auto-zooming we'll adjust when we load the footprint.)
GetGalCanvas()->GetView()->SetScale( m_lastZoom );
updateView();
if( !IsModal() ) // For modal mode, calling ShowModal() will show this frame
{
Raise(); // On some window managers, this is needed
Show( true );
}
}