bool DIALOG_EXCHANGE_MODULE::changeAllFootprints()
{
MODULE* Module, * PtBack;
bool change = false;
int ShowErr = 3; // Post 3 error max.
if( m_parent->GetBoard()->m_Modules == NULL )
return false;
if( !IsOK( this, _( "Are you sure you want to change all footprints?" ) ) )
return false;
/* The change is done from the last module because the function
* change_1_Module () modifies the last module in the list
*
* note: for the first module in chain (the last here), Module->Back()
* points the board or is NULL
*/
Module = m_parent->GetBoard()->m_Modules.GetLast();
for( ; Module && ( Module->Type() == PCB_MODULE_T ); Module = PtBack )
{
PtBack = Module->Back();
if( change_1_Module( Module, Module->GetFPID(), ShowErr ) )
change = true;
else if( ShowErr )
ShowErr--;
}
return change;
}
bool FOOTPRINT_EDIT_FRAME::Load_Module_From_BOARD( MODULE* aModule )
{
MODULE* newModule;
PCB_EDIT_FRAME* frame = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );
if( frame == NULL ) // happens if no board editor opened
return false;
if( aModule == NULL )
{
if( ! frame->GetBoard() || ! frame->GetBoard()->m_Modules )
return false;
aModule = SelectFootprint( frame->GetBoard() );
}
if( aModule == NULL )
return false;
SetCurItem( NULL );
Clear_Pcb( false );
GetBoard()->m_Status_Pcb = 0;
newModule = new MODULE( *aModule );
newModule->SetParent( GetBoard() );
newModule->SetLink( aModule->GetTimeStamp() );
aModule = newModule;
GetBoard()->Add( newModule );
newModule->ClearFlags();
// Clear references to net info, because the footprint editor
// does know any thing about nets handled by the current edited board.
// Morever the main board can change or the net info relative to this main board
// can change while editing this footprint in the footprint editor
for( D_PAD* pad = newModule->Pads(); pad; pad = pad->Next() )
pad->SetNetCode( NETINFO_LIST::UNCONNECTED );
SetCrossHairPosition( wxPoint( 0, 0 ) );
PlaceModule( newModule, NULL );
// Put it on FRONT layer,
// because this is the default in ModEdit, and in libs
if( newModule->GetLayer() != LAYER_N_FRONT )
newModule->Flip( newModule->GetPosition() );
// Put it in orientation 0,
// because this is the default orientation in ModEdit, and in libs
Rotate_Module( NULL, newModule, 0, false );
GetScreen()->ClrModify();
Zoom_Automatique( false );
return true;
}
/* Function called to abort a track creation
*/
static void Abort_Create_Track( EDA_DRAW_PANEL* Panel, wxDC* DC )
{
PCB_EDIT_FRAME* frame = (PCB_EDIT_FRAME*) Panel->GetParent();
BOARD* pcb = frame->GetBoard();
TRACK* track = (TRACK*) frame->GetCurItem();
if( track && ( track->Type()==PCB_VIA_T || track->Type()==PCB_TRACE_T ) )
{
// Erase the current drawing
ShowNewTrackWhenMovingCursor( Panel, DC, wxDefaultPosition, false );
if( pcb->IsHighLightNetON() )
frame->HighLight( DC );
pcb->PopHighLight();
if( pcb->IsHighLightNetON() )
pcb->DrawHighLight( Panel, DC, pcb->GetHighLightNetCode() );
frame->ClearMsgPanel();
// Undo pending changes (mainly a lock point creation) and clear the
// undo picker list:
frame->PutDataInPreviousState( &s_ItemsListPicker, false, false );
s_ItemsListPicker.ClearListAndDeleteItems();
// Delete current (new) track
g_CurrentTrackList.DeleteAll();
}
frame->SetCurItem( NULL );
}
/** Abort function for drag or move track
*/
static void Abort_MoveTrack( EDA_DRAW_PANEL* aPanel, wxDC* aDC )
{
PCB_EDIT_FRAME* frame = (PCB_EDIT_FRAME*) aPanel->GetParent();
BOARD * pcb = frame->GetBoard();
pcb->HighLightOFF();
pcb->PopHighLight();
frame->SetCurItem( NULL );
aPanel->SetMouseCapture( NULL, NULL );
// Undo move and redraw trace segments.
for( unsigned jj=0 ; jj < g_DragSegmentList.size(); jj++ )
{
TRACK* track = g_DragSegmentList[jj].m_Track;
g_DragSegmentList[jj].RestoreInitialValues();
track->SetState( IN_EDIT, false );
track->ClearFlags();
}
// Clear the undo picker list:
s_ItemsListPicker.ClearListAndDeleteItems();
EraseDragList();
aPanel->Refresh();
}
void DIALOG_EXCHANGE_MODULE::OnOkClick( wxCommandEvent& event )
{
m_selectionMode = m_Selection->GetSelection();
bool result = false;
switch( m_Selection->GetSelection() )
{
case 0:
result = changeCurrentFootprint();
break;
case 1:
result = changeSameFootprints( false );
break;
case 2:
result = changeSameFootprints( true );
break;
case 3:
result = changeAllFootprints();
break;
}
if( result )
{
if( m_parent->GetBoard()->IsElementVisible( RATSNEST_VISIBLE ) )
m_parent->Compile_Ratsnest( NULL, true );
m_parent->GetCanvas()->Refresh();
}
m_commit.Push( wxT( "Changed footprint" ) );
}
void FOOTPRINT_EDIT_FRAME::OnUpdateInsertModuleInBoard( wxUpdateUIEvent& aEvent )
{
PCB_EDIT_FRAME* frame = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );
MODULE* module_in_edit = GetBoard()->m_Modules;
bool canInsert = frame && module_in_edit && !module_in_edit->GetLink();
// If the source was deleted, the module can inserted but not updated in the board.
if( frame && module_in_edit && module_in_edit->GetLink() ) // this is not a new module
{
BOARD* mainpcb = frame->GetBoard();
MODULE* source_module = mainpcb->m_Modules;
// search if the source module was not deleted:
for( ; source_module != NULL; source_module = source_module->Next() )
{
if( module_in_edit->GetLink() == source_module->GetTimeStamp() )
break;
}
canInsert = ( source_module == NULL );
}
aEvent.Enable( canInsert );
}
bool DIALOG_SWAP_LAYERS::TransferDataToWindow()
{
LSET enabledCopperLayers = LSET::AllCuMask( m_parent->GetBoard()->GetCopperLayerCount() );
int row = 0;
for( size_t layer = 0; layer < PCB_LAYER_ID_COUNT; ++layer )
{
if( enabledCopperLayers.test( layer ) )
{
auto attr = new wxGridCellAttr;
attr->SetRenderer( new GRID_CELL_LAYER_RENDERER( m_parent ) );
attr->SetBackgroundColour( wxSystemSettings::GetColour( wxSYS_COLOUR_MENU ) );
attr->SetReadOnly();
m_grid->SetAttr( row, 0, attr );
attr = new wxGridCellAttr;
attr->SetRenderer( new GRID_CELL_LAYER_RENDERER( m_parent ) );
attr->SetEditor( new GRID_CELL_LAYER_SELECTOR( m_parent, LSET::AllNonCuMask() ) );
m_grid->SetAttr( row, 1, attr );
m_grid->GetTable()->SetValueAsLong( row, 0, (long) layer );
m_grid->GetTable()->SetValueAsLong( row, 1, (long) layer );
++row;
}
}
return true;
}
/* Redraws the zone outlines when moving mouse
*/
static void Show_New_Edge_While_Move_Mouse( EDA_DRAW_PANEL* aPanel, wxDC* aDC,
const wxPoint& aPosition, bool aErase )
{
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) aPanel->GetParent();
wxPoint c_pos = pcbframe->GetScreen()->GetCrossHairPosition();
ZONE_CONTAINER* zone = pcbframe->GetBoard()->m_CurrentZoneContour;
if( !zone )
return;
int icorner = zone->GetNumCorners() - 1;
if( icorner < 1 )
return; // We must have 2 (or more) corners
if( aErase ) // Undraw edge in old position
{
zone->DrawWhileCreateOutline( aPanel, aDC );
}
// Redraw the current edge in its new position
if( pcbframe->GetZoneSettings().m_Zone_45_Only )
{
// calculate the new position as allowed
wxPoint StartPoint = zone->GetCornerPosition( icorner - 1 );
CalculateSegmentEndPoint( c_pos, StartPoint.x, StartPoint.y, &c_pos.x, &c_pos.y );
}
zone->SetCornerPosition( icorner, c_pos );
zone->DrawWhileCreateOutline( aPanel, aDC );
}
void DIALOG_GEN_MODULE_POSITION::OnOutputDirectoryBrowseClicked( wxCommandEvent& event )
{
// Build the absolute path of current output plot directory
// to preselect it when opening the dialog.
wxFileName fn( m_outputDirectoryName->GetValue() );
wxString path = Prj().AbsolutePath( m_outputDirectoryName->GetValue() );
wxDirDialog dirDialog( this, _( "Select Output Directory" ), path );
if( dirDialog.ShowModal() == wxID_CANCEL )
return;
wxFileName dirName = wxFileName::DirName( dirDialog.GetPath() );
wxMessageDialog dialog( this, _( "Use a relative path? "),
_( "Plot Output Directory" ),
wxYES_NO | wxICON_QUESTION | wxYES_DEFAULT );
if( dialog.ShowModal() == wxID_YES )
{
wxString boardFilePath = ( (wxFileName) m_parent->GetBoard()->GetFileName()).GetPath();
if( !dirName.MakeRelativeTo( boardFilePath ) )
wxMessageBox( _( "Cannot make path relative (target volume different from board file volume)!" ),
_( "Plot Output Directory" ), wxOK | wxICON_ERROR );
}
m_outputDirectoryName->SetValue( dirName.GetFullPath() );
}
void DIALOG_EXCHANGE_MODULE::RebuildCmpList( wxCommandEvent& event )
{
wxFileName fn;
wxString msg;
// Build the .cmp file name from the board name
fn = m_parent->GetBoard()->GetFileName();
fn.SetExt( ComponentFileExtension );
if( RecreateCmpFile( m_parent->GetBoard(), fn.GetFullPath() ) )
{
msg.Printf( _( "File '%s' created\n" ),
GetChars( fn.GetFullPath() ) );
}
else
{
msg.Printf( _( "** Could not create file '%s' ***\n" ),
GetChars( fn.GetFullPath() ) );
}
m_WinMessages->AppendText( msg );
}
/**
* Function Abort_Zone_Create_Outline
* cancels the Begin_Zone command if at least one EDGE_ZONE was created.
*/
static void Abort_Zone_Create_Outline( EDA_DRAW_PANEL* Panel, wxDC* DC )
{
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) Panel->GetParent();
ZONE_CONTAINER* zone = pcbframe->GetBoard()->m_CurrentZoneContour;
if( zone )
{
zone->DrawWhileCreateOutline( Panel, DC, GR_XOR );
zone->RemoveAllContours();
if( zone->IsNew() )
{
delete zone;
pcbframe->GetBoard()->m_CurrentZoneContour = NULL;
}
else
zone->ClearFlags();
}
pcbframe->SetCurItem( NULL );
s_AddCutoutToCurrentZone = false;
s_CurrentZone = NULL;
Panel->SetMouseCapture( NULL, NULL );
}
bool DIALOG_SWAP_LAYERS::TransferDataFromWindow()
{
if( !m_grid->CommitPendingChanges() )
return false;
LSET enabledCopperLayers = LSET::AllCuMask( m_parent->GetBoard()->GetCopperLayerCount() );
wxGridTableBase* table = m_grid->GetTable();
int row = 0;
for( size_t layer = 0; layer < PCB_LAYER_ID_COUNT; ++layer )
{
if( enabledCopperLayers.test( layer ) )
m_layerDestinations[ layer ] = (PCB_LAYER_ID) table->GetValueAsLong( row++, 1 );
else
m_layerDestinations[ layer ] = (PCB_LAYER_ID) layer;
}
return true;
}
void FOOTPRINT_EDIT_FRAME::OnUpdateReplaceModuleInBoard( wxUpdateUIEvent& aEvent )
{
PCB_EDIT_FRAME* frame = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );
MODULE* module_in_edit = GetBoard()->m_Modules;
bool canReplace = frame && module_in_edit && module_in_edit->GetLink();
if( canReplace ) // this is not a new module, but verify if the source is still on board
{
BOARD* mainpcb = frame->GetBoard();
MODULE* source_module = mainpcb->m_Modules;
// search if the source module was not deleted:
for( ; source_module != NULL; source_module = source_module->Next() )
{
if( module_in_edit->GetLink() == source_module->GetTimeStamp() )
break;
}
canReplace = ( source_module != NULL );
}
aEvent.Enable( canReplace );
}
bool FOOTPRINT_EDIT_FRAME::SaveFootprintToBoard( bool aAddNew )
{
// update module in the current board,
// not just add it to the board with total disregard for the netlist...
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );
if( pcbframe == NULL ) // happens when the board editor is not active (or closed)
{
DisplayErrorMessage( this, _("No board currently open." ) );
return false;
}
BOARD* mainpcb = pcbframe->GetBoard();
MODULE* source_module = NULL;
MODULE* module_in_edit = GetBoard()->m_Modules;
// Search the old module (source) if exists
// Because this source could be deleted when editing the main board...
if( module_in_edit->GetLink() ) // this is not a new module ...
{
source_module = mainpcb->m_Modules;
for( ; source_module != NULL; source_module = source_module->Next() )
{
if( module_in_edit->GetLink() == source_module->GetTimeStamp() )
break;
}
}
if( !aAddNew && source_module == NULL ) // source not found
{
DisplayError( this, _( "Unable to find the footprint on the main board.\nCannot save." ) );
return false;
}
if( aAddNew && source_module != NULL )
{
DisplayError( this, _( "Footprint already exists on board." ) );
return false;
}
m_toolManager->RunAction( PCB_ACTIONS::selectionClear, true );
pcbframe->GetToolManager()->RunAction( PCB_ACTIONS::selectionClear, true );
BOARD_COMMIT commit( pcbframe );
// Create the "new" module
MODULE* newmodule = new MODULE( *module_in_edit );
newmodule->SetParent( mainpcb );
newmodule->SetLink( 0 );
if( source_module ) // this is an update command
{
// In the main board,
// the new module replace the old module (pos, orient, ref, value
// and connexions are kept)
// and the source_module (old module) is deleted
pcbframe->Exchange_Module( source_module, newmodule, commit );
newmodule->SetTimeStamp( module_in_edit->GetLink() );
commit.Push( wxT( "Update module" ) );
}
else // This is an insert command
{
wxPoint cursor_pos = pcbframe->GetCrossHairPosition();
commit.Add( newmodule );
pcbframe->SetCrossHairPosition( wxPoint( 0, 0 ) );
pcbframe->PlaceModule( newmodule, NULL );
newmodule->SetPosition( wxPoint( 0, 0 ) );
pcbframe->SetCrossHairPosition( cursor_pos );
newmodule->SetTimeStamp( GetNewTimeStamp() );
commit.Push( wxT( "Insert module" ) );
}
newmodule->ClearFlags();
pcbframe->SetCurItem( NULL );
// @todo LEGACY should be unnecessary
mainpcb->m_Status_Pcb = 0;
return true;
}
void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
wxGetMousePosition( &pos.x, &pos.y );
pos.y += 20;
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_MODEDIT_PAD_SETTINGS:
case ID_PCB_USER_GRID_SETUP:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_APPLY_PAD_SETTINGS:
case ID_POPUP_PCB_COPY_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM:
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
case ID_POPUP_PCB_DELETE_EDGE:
case ID_POPUP_PCB_DELETE_TEXTMODULE:
case ID_POPUP_PCB_DELETE_PAD:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_MIRROR_X_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
default:
if( m_canvas->IsMouseCaptured() )
{
// for all other commands: stop the move in progress
m_canvas->CallEndMouseCapture( &dc );
}
if( id != ID_POPUP_CANCEL_CURRENT_COMMAND )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
switch( id )
{
case ID_EXIT:
Close( true );
break;
case ID_MODEDIT_SELECT_CURRENT_LIB:
{
wxString library = SelectLibrary( GetCurrentLib() );
if( library.size() )
{
Prj().SetRString( PROJECT::PCB_LIB_NICKNAME, library );
updateTitle();
}
}
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME* viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );
if( !viewer )
{
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, true );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
// On Windows, Raise() does not bring the window on screen, when iconized
if( viewer->IsIconized() )
viewer->Iconize( false );
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_MODEDIT_DELETE_PART:
DeleteModuleFromCurrentLibrary();
break;
case ID_MODEDIT_NEW_MODULE:
{
if( !Clear_Pcb( true ) )
break;
SetCrossHairPosition( wxPoint( 0, 0 ) );
MODULE* module = CreateNewModule( wxEmptyString );
if( module ) // i.e. if create module command not aborted
{
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
Zoom_Automatique( false );
}
updateView();
m_canvas->Refresh();
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_NEW_MODULE_FROM_WIZARD:
{
if( GetScreen()->IsModify() && !GetBoard()->IsEmpty() )
{
if( !IsOK( this,
_( "Current Footprint will be lost and this operation cannot be undone. Continue ?" ) ) )
break;
}
FOOTPRINT_WIZARD_FRAME* wizard = (FOOTPRINT_WIZARD_FRAME*) Kiway().Player(
FRAME_PCB_FOOTPRINT_WIZARD_MODAL, true, this );
if( wizard->ShowModal( NULL, this ) )
{
// Creates the new footprint from python script wizard
MODULE* module = wizard->GetBuiltFootprint();
if( module == NULL ) // i.e. if create module command aborted
break;
Clear_Pcb( false );
SetCrossHairPosition( wxPoint( 0, 0 ) );
// Add the new object to board
GetBoard()->Add( module, ADD_APPEND );
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
module->SetPosition( wxPoint( 0, 0 ) );
module->ClearFlags();
Zoom_Automatique( false );
updateView();
m_canvas->Refresh();
EDA_3D_VIEWER* draw3DFrame = Get3DViewerFrame();
if( draw3DFrame )
draw3DFrame->NewDisplay();
GetScreen()->ClrModify();
}
wizard->Destroy();
}
break;
case ID_MODEDIT_SAVE_LIBMODULE:
if( GetBoard()->m_Modules && GetCurrentLib().size() )
{
SaveFootprintInLibrary( GetCurrentLib(), GetBoard()->m_Modules, true, true );
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_INSERT_MODULE_IN_BOARD:
case ID_MODEDIT_UPDATE_MODULE_IN_BOARD:
{
// update module in the current board,
// not just add it to the board with total disregard for the netlist...
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );
if( pcbframe == NULL ) // happens when the board editor is not active (or closed)
{
wxMessageBox( _("No board currently edited" ) );
break;
}
BOARD* mainpcb = pcbframe->GetBoard();
MODULE* source_module = NULL;
MODULE* module_in_edit = GetBoard()->m_Modules;
// Search the old module (source) if exists
// Because this source could be deleted when editing the main board...
if( module_in_edit->GetLink() ) // this is not a new module ...
{
source_module = mainpcb->m_Modules;
for( ; source_module != NULL; source_module = source_module->Next() )
{
if( module_in_edit->GetLink() == source_module->GetTimeStamp() )
break;
}
}
if( ( source_module == NULL )
&& ( id == ID_MODEDIT_UPDATE_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "Unable to find the footprint source on the main board" ) );
msg << _( "\nCannot update the footprint" );
DisplayError( this, msg );
break;
}
if( ( source_module != NULL )
&& ( id == ID_MODEDIT_INSERT_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "A footprint source was found on the main board" ) );
msg << _( "\nCannot insert this footprint" );
DisplayError( this, msg );
break;
}
m_toolManager->RunAction( PCB_ACTIONS::selectionClear, true );
pcbframe->GetToolManager()->RunAction( PCB_ACTIONS::selectionClear, true );
BOARD_COMMIT commit( pcbframe );
// Create the "new" module
MODULE* newmodule = new MODULE( *module_in_edit );
newmodule->SetParent( mainpcb );
newmodule->SetLink( 0 );
if( source_module ) // this is an update command
{
// In the main board,
// the new module replace the old module (pos, orient, ref, value
// and connexions are kept)
// and the source_module (old module) is deleted
pcbframe->Exchange_Module( source_module, newmodule, commit );
newmodule->SetTimeStamp( module_in_edit->GetLink() );
commit.Push( wxT( "Update module" ) );
}
else // This is an insert command
{
wxPoint cursor_pos = pcbframe->GetCrossHairPosition();
commit.Add( newmodule );
pcbframe->SetCrossHairPosition( wxPoint( 0, 0 ) );
pcbframe->PlaceModule( newmodule, NULL );
newmodule->SetPosition( wxPoint( 0, 0 ) );
pcbframe->SetCrossHairPosition( cursor_pos );
newmodule->SetTimeStamp( GetNewTimeStamp() );
commit.Push( wxT( "Insert module" ) );
}
newmodule->ClearFlags();
GetScreen()->ClrModify();
pcbframe->SetCurItem( NULL );
// @todo LEGACY should be unnecessary
mainpcb->m_Status_Pcb = 0;
}
break;
case ID_MODEDIT_IMPORT_PART:
if( ! Clear_Pcb( true ) )
break; // //this command is aborted
SetCrossHairPosition( wxPoint( 0, 0 ) );
Import_Module();
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
GetScreen()->ClrModify();
Zoom_Automatique( false );
m_canvas->Refresh();
{
EDA_3D_VIEWER* draw3DFrame = Get3DViewerFrame();
if( draw3DFrame )
draw3DFrame->NewDisplay();
}
break;
case ID_MODEDIT_EXPORT_PART:
if( GetBoard()->m_Modules )
Export_Module( GetBoard()->m_Modules );
break;
case ID_MODEDIT_CREATE_NEW_LIB_AND_SAVE_CURRENT_PART:
if( GetBoard()->m_Modules )
{
// CreateModuleLibrary() only creates a new library, does not save footprint
wxString libPath = CreateNewLibrary();
if( libPath.size() )
SaveCurrentModule( &libPath );
}
break;
case ID_MODEDIT_SHEET_SET:
break;
case ID_MODEDIT_LOAD_MODULE:
wxLogDebug( wxT( "Loading module from library " ) + getLibPath() );
if( ! Clear_Pcb( true ) )
break;
SetCrossHairPosition( wxPoint( 0, 0 ) );
LoadModuleFromLibrary( GetCurrentLib(), Prj().PcbFootprintLibs(), true );
if( GetBoard() && GetBoard()->m_Modules )
{
GetBoard()->m_Modules->ClearFlags();
// if either m_Reference or m_Value are gone, reinstall them -
// otherwise you cannot see what you are doing on board
TEXTE_MODULE* ref = &GetBoard()->m_Modules->Reference();
TEXTE_MODULE* val = &GetBoard()->m_Modules->Value();
if( val && ref )
{
ref->SetType( TEXTE_MODULE::TEXT_is_REFERENCE ); // just in case ...
if( ref->GetLength() == 0 )
ref->SetText( wxT( "Ref**" ) );
val->SetType( TEXTE_MODULE::TEXT_is_VALUE ); // just in case ...
if( val->GetLength() == 0 )
val->SetText( wxT( "Val**" ) );
}
}
Zoom_Automatique( false );
{
EDA_3D_VIEWER* draw3DFrame = Get3DViewerFrame();
if( draw3DFrame )
draw3DFrame->NewDisplay();
}
GetScreen()->ClrModify();
updateView();
m_canvas->Refresh();
break;
case ID_MODEDIT_PAD_SETTINGS:
InstallPadOptionsFrame( NULL );
break;
case ID_MODEDIT_CHECK:
// Currently: not implemented
break;
case ID_MODEDIT_EDIT_MODULE_PROPERTIES:
if( GetBoard()->m_Modules )
{
SetCurItem( GetBoard()->m_Modules );
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->Refresh();
}
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), 900, true );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), -900, true );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_EDIT_MODULE_PRMS:
{
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->MoveCursorToCrossHair();
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetScreen()->GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_CHANGED );
DeletePad( (D_PAD*) GetScreen()->GetCurItem(), false );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DUPLICATE_ITEM:
duplicateItems( false );
break;
case ID_POPUP_PCB_DUPLICATE_ITEM_AND_INCREMENT:
duplicateItems( true );
break;
case ID_POPUP_PCB_MOVE_EXACT:
moveExact();
break;
case ID_POPUP_PCB_CREATE_ARRAY:
createArray();
break;
case ID_POPUP_PCB_APPLY_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_CHANGED );
m_canvas->MoveCursorToCrossHair();
Import_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_CHANGED );
// Calls the global change dialog:
DlgGlobalChange_PadSettings( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_COPY_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem() );
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_CHANGED );
DeleteTextModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ) );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_EDGE:
Start_Move_EdgeMod( static_cast<EDGE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetScreen()->GetCurItem()->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
}
break;
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
{
EDGE_MODULE* edge = NULL;
if( GetScreen()->GetCurItem()
&& ( GetScreen()->GetCurItem()->Type() == PCB_MODULE_EDGE_T ) )
{
edge = (EDGE_MODULE*) GetScreen()->GetCurItem();
}
Enter_Edge_Width( edge );
m_canvas->MoveCursorToCrossHair();
if( edge )
m_canvas->Refresh();
}
break;
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_DELETE_EDGE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_CHANGED );
m_canvas->MoveCursorToCrossHair();
RemoveStruct( GetScreen()->GetCurItem() );
SetCurItem( NULL );
break;
case ID_MODEDIT_MODULE_ROTATE:
case ID_MODEDIT_MODULE_MIRROR:
case ID_MODEDIT_MODULE_MOVE_EXACT:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_CHANGED );
Transform( (MODULE*) GetScreen()->GetCurItem(), id );
m_canvas->Refresh();
break;
case ID_PCB_DRAWINGS_WIDTHS_SETUP:
InstallOptionsFrame( pos );
break;
case ID_PCB_PAD_SETUP:
{
BOARD_ITEM* item = GetCurItem();
if( item )
{
if( item->Type() != PCB_PAD_T )
item = NULL;
}
InstallPadOptionsFrame( (D_PAD*) item );
}
break;
case ID_PCB_USER_GRID_SETUP:
InvokeDialogGrid();
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MIRROR_X_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MOVE_BLOCK_EXACT:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE_EXACT );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_GEN_IMPORT_DXF_FILE:
if( GetBoard()->m_Modules )
{
InvokeDXFDialogModuleImport( this, GetBoard()->m_Modules );
m_canvas->Refresh();
}
break;
default:
DisplayError( this,
wxT( "FOOTPRINT_EDIT_FRAME::Process_Special_Functions error" ) );
break;
}
}
void DIALOG_DIMENSION_EDITOR::OnOKClick( wxCommandEvent& event )
{
LAYER_ID newlayer = ToLAYER_ID( m_SelLayerBox->GetLayerSelection() );
if( !m_Parent->GetBoard()->IsLayerEnabled( newlayer ) )
{
wxMessageBox( _( "The layer currently selected is not enabled for this board\n"
"You cannot use it" ) );
return;
}
#ifndef USE_WX_OVERLAY
if( m_DC ) // Delete old text.
{
CurrentDimension->Draw( m_Parent->GetCanvas(), m_DC, GR_XOR );
}
#endif
m_Parent->SaveCopyInUndoList(CurrentDimension, UR_CHANGED);
if( m_Name->GetValue() != wxEmptyString )
{
CurrentDimension->SetText( m_Name->GetValue() );
}
wxString msg;
// Get new size value:
msg = m_TxtSizeXCtrl->GetValue();
CurrentDimension->Text().SetWidth( ValueFromString( g_UserUnit, msg ) );
msg = m_TxtSizeYCtrl->GetValue();
CurrentDimension->Text().SetHeight( ValueFromString( g_UserUnit, msg ) );
// Get new position value:
// It will be copied later in dimension, because
msg = m_textCtrlPosX->GetValue();
wxPoint pos;
pos.x = ValueFromString( g_UserUnit, msg );
msg = m_textCtrlPosY->GetValue();
pos.y = ValueFromString( g_UserUnit, msg );
CurrentDimension->Text().SetTextPosition( pos );
// Get new line thickness value:
msg = m_TxtWidthCtrl->GetValue();
int width = ValueFromString( g_UserUnit, msg );
int maxthickness = Clamp_Text_PenSize( width, CurrentDimension->Text().GetSize() );
if( width > maxthickness )
{
DisplayError( NULL,
_( "The text thickness is too large for the text size. "
"It will be clamped" ) );
width = maxthickness;
}
CurrentDimension->SetWidth( width );
CurrentDimension->Text().SetThickness( width );
CurrentDimension->Text().SetMirrored( ( m_rbMirror->GetSelection() == 1 ) ? true : false );
CurrentDimension->SetLayer( newlayer );
#ifndef USE_WX_OVERLAY
if( m_DC ) // Display new text
{
CurrentDimension->Draw( m_Parent->GetCanvas(), m_DC, GR_OR );
}
#else
m_Parent->Refresh();
#endif
m_Parent->OnModify();
EndModal( 1 );
}
void DIALOG_DIMENSION_EDITOR::OnOKClick( wxCommandEvent& event )
{
BOARD_COMMIT commit( m_parent );
PCB_LAYER_ID newlayer = ToLAYER_ID( m_SelLayerBox->GetLayerSelection() );
if( !m_parent->GetBoard()->IsLayerEnabled( newlayer ) )
{
wxMessageBox( _( "The layer currently selected is not enabled for this board\n"
"You cannot use it" ) );
return;
}
#ifndef USE_WX_OVERLAY
if( m_DC ) // Delete old text.
{
m_currentDimension->Draw( m_parent->GetCanvas(), m_DC, GR_XOR );
}
#endif
commit.Modify( m_currentDimension );
if( m_Name->GetValue() != wxEmptyString )
{
m_currentDimension->SetText( m_Name->GetValue() );
}
wxString msg;
// Get new size value:
msg = m_TxtSizeXCtrl->GetValue();
m_currentDimension->Text().SetTextWidth( ValueFromString( g_UserUnit, msg ) );
msg = m_TxtSizeYCtrl->GetValue();
m_currentDimension->Text().SetTextHeight( ValueFromString( g_UserUnit, msg ) );
// Get new position value:
// It will be copied later in dimension, because
msg = m_textCtrlPosX->GetValue();
wxPoint pos;
pos.x = ValueFromString( g_UserUnit, msg );
msg = m_textCtrlPosY->GetValue();
pos.y = ValueFromString( g_UserUnit, msg );
m_currentDimension->Text().SetTextPos( pos );
// Get new line thickness value:
msg = m_TxtWidthCtrl->GetValue();
int width = ValueFromString( g_UserUnit, msg );
int maxthickness = Clamp_Text_PenSize( width, m_currentDimension->Text().GetTextSize() );
if( width > maxthickness )
{
DisplayError( NULL,
_( "The text thickness is too large for the text size. "
"It will be clamped" ) );
width = maxthickness;
}
m_currentDimension->SetWidth( width );
m_currentDimension->Text().SetThickness( width );
m_currentDimension->Text().SetMirrored( ( m_rbMirror->GetSelection() == 1 ) ? true : false );
m_currentDimension->SetLayer( newlayer );
#ifndef USE_WX_OVERLAY
if( m_DC ) // Display new text
{
m_currentDimension->Draw( m_parent->GetCanvas(), m_DC, GR_OR );
}
#else
m_parent->Refresh();
#endif
commit.Push( _( "Modifed dimensions properties" ) );
event.Skip(); // ends returning wxID_OK (default behavior)
}
void FOOTPRINT_EDIT_FRAME::OnUpdateLoadModuleFromBoard( wxUpdateUIEvent& aEvent )
{
PCB_EDIT_FRAME* frame = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );
aEvent.Enable( frame && frame->GetBoard()->m_Modules != NULL );
}
bool DIALOG_EXCHANGE_MODULE::changeSameFootprints( bool aUseValue )
{
wxString msg;
MODULE* Module;
MODULE* PtBack;
bool change = false;
wxString newmodulename = m_NewFootprintFPID->GetValue();
wxString value;
LIB_ID lib_reference;
bool check_module_value = false;
int ShowErr = 3; // Post 3 error messages max.
if( m_parent->GetBoard()->m_Modules == NULL )
return false;
if( newmodulename == wxEmptyString )
return false;
lib_reference = m_currentModule->GetFPID();
if( aUseValue )
{
check_module_value = true;
value = m_currentModule->GetValue();
msg.Printf( _( "Change footprint %s -> %s (for value = %s)?" ),
GetChars( FROM_UTF8( m_currentModule->GetFPID().Format().c_str() ) ),
GetChars( newmodulename ),
GetChars( m_currentModule->GetValue() ) );
}
else
{
msg.Printf( _( "Change footprint %s -> %s ?" ),
GetChars( FROM_UTF8( lib_reference.Format().c_str() ) ),
GetChars( newmodulename ) );
}
if( !IsOK( this, msg ) )
return false;
/* The change is done from the last module because
* change_1_Module () modifies the last item in the list.
*
* note: for the first module in chain (the last here), Module->Back()
* points the board or is NULL
*/
Module = m_parent->GetBoard()->m_Modules.GetLast();
for( ; Module && ( Module->Type() == PCB_MODULE_T ); Module = PtBack )
{
PtBack = Module->Back();
if( lib_reference != Module->GetFPID() )
continue;
if( check_module_value )
{
if( value.CmpNoCase( Module->GetValue() ) != 0 )
continue;
}
if( change_1_Module( Module, newmodulename, ShowErr ) )
change = true;
else if( ShowErr )
ShowErr--;
}
return change;
}
void DIALOG_GRAPHIC_ITEM_PROPERTIES::initDlg( )
/**************************************************************************/
/* Initialize messages and values in text control,
* according to the item parameters values
*/
{
SetFocus();
m_StandardButtonsSizerOK->SetDefault();
// Set unit symbol
wxStaticText * texts_unit[] =
{
m_StartPointXUnit,
m_StartPointYUnit,
m_EndPointXUnit,
m_EndPointYUnit,
m_ThicknessTextUnit,
m_DefaulThicknessTextUnit,
NULL
};
for( int ii = 0; ; ii++ )
{
if( texts_unit[ii] == NULL )
break;
texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
}
wxString msg;
// Change texts according to the segment shape:
switch ( m_Item->GetShape() )
{
case S_CIRCLE:
m_StartPointXLabel->SetLabel(_("Center X"));
m_StartPointYLabel->SetLabel(_("Center Y"));
m_EndPointXLabel->SetLabel(_("Point X"));
m_EndPointYLabel->SetLabel(_("Point Y"));
m_Angle_Text->Show(false);
m_Angle_Ctrl->Show(false);
m_AngleUnit->Show(false);
break;
case S_ARC:
m_StartPointXLabel->SetLabel(_("Center X"));
m_StartPointYLabel->SetLabel(_("Center Y"));
m_EndPointXLabel->SetLabel(_("Start Point X"));
m_EndPointYLabel->SetLabel(_("Start Point Y"));
msg << m_Item->GetAngle();
m_Angle_Ctrl->SetValue(msg);
break;
default:
m_Angle_Text->Show(false);
m_Angle_Ctrl->Show(false);
m_AngleUnit->Show(false);
break;
}
PutValueInLocalUnits( *m_Center_StartXCtrl, m_Item->GetStart().x,
m_parent->GetInternalUnits() );
PutValueInLocalUnits( *m_Center_StartYCtrl, m_Item->GetStart().y,
m_parent->GetInternalUnits() );
PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_Item->GetEnd().x,
m_parent->GetInternalUnits() );
PutValueInLocalUnits( *m_EndY_Ctrl, m_Item->GetEnd().y,
m_parent->GetInternalUnits() );
PutValueInLocalUnits( *m_ThicknessCtrl, m_Item->GetWidth(),
m_parent->GetInternalUnits() );
int thickness;
if( m_Item->GetLayer() == EDGE_N )
thickness = m_brdSettings.m_EdgeSegmentWidth;
else
thickness = m_brdSettings.m_DrawSegmentWidth;
PutValueInLocalUnits( *m_DefaultThicknessCtrl, thickness,
m_parent->GetInternalUnits() );
for( int layer=FIRST_NO_COPPER_LAYER; layer <= LAST_NO_COPPER_LAYER; ++layer )
{
m_LayerSelectionCtrl->Append( m_parent->GetBoard()->GetLayerName( layer ) );
}
int layer = m_Item->GetLayer();
// Control:
if ( layer < FIRST_NO_COPPER_LAYER )
layer = FIRST_NO_COPPER_LAYER;
if ( layer > LAST_NO_COPPER_LAYER )
layer = LAST_NO_COPPER_LAYER;
m_LayerSelectionCtrl->SetSelection( layer - FIRST_NO_COPPER_LAYER );
}
bool DIALOG_GEN_MODULE_POSITION::CreateFiles()
{
BOARD * brd = m_parent->GetBoard();
wxFileName fn;
wxString msg;
bool singleFile = OneFileOnly();
int fullcount = 0;
// Count the footprints to place, do not yet create a file
int fpcount = m_parent->DoGenFootprintsPositionFile( wxEmptyString, UnitsMM(),
ForceAllSmd(), 2 );
if( fpcount == 0)
{
wxMessageBox( _( "No modules for automated placement." ) );
return false;
}
// Create output directory if it does not exist (also transform it in
// absolute form). Bail if it fails
wxFileName outputDir = wxFileName::DirName( m_plotOpts.GetOutputDirectory() );
wxString boardFilename = m_parent->GetBoard()->GetFileName();
m_reporter = &m_messagesPanel->Reporter();
if( !EnsureFileDirectoryExists( &outputDir, boardFilename, m_reporter ) )
{
msg.Printf( _( "Could not write plot files to folder \"%s\"." ),
GetChars( outputDir.GetPath() ) );
DisplayError( this, msg );
return false;
}
fn = m_parent->GetBoard()->GetFileName();
fn.SetPath( outputDir.GetPath() );
// Create the the Front or Top side placement file,
// or the single file
int side = 1;
if( singleFile )
{
side = 2;
fn.SetName( fn.GetName() + wxT( "-" ) + wxT("all") );
}
else
fn.SetName( fn.GetName() + wxT( "-" ) + frontSideName );
fn.SetExt( FootprintPlaceFileExtension );
fpcount = m_parent->DoGenFootprintsPositionFile( fn.GetFullPath(), UnitsMM(),
ForceAllSmd(), side );
if( fpcount < 0 )
{
msg.Printf( _( "Unable to create '%s'." ), GetChars( fn.GetFullPath() ) );
wxMessageBox( msg );
m_reporter->Report( msg, REPORTER::RPT_ERROR );
return false;
}
if( singleFile )
msg.Printf( _( "Place file: '%s'." ), GetChars( fn.GetFullPath() ) );
else
msg.Printf( _( "Front side (top side) place file: '%s'." ),
GetChars( fn.GetFullPath() ) );
m_reporter->Report( msg, REPORTER::RPT_INFO );
msg.Printf( _( "Component count: %d." ), fpcount );
m_reporter->Report( msg, REPORTER::RPT_INFO );
if( singleFile )
{
m_reporter->Report( _( "Componment Placement File generation OK." ), REPORTER::RPT_ACTION );
return true;
}
// Create the Back or Bottom side placement file
fullcount = fpcount;
side = 0;
fn = brd->GetFileName();
fn.SetPath( outputDir.GetPath() );
fn.SetName( fn.GetName() + wxT( "-" ) + backSideName );
fn.SetExt( wxT( "pos" ) );
fpcount = m_parent->DoGenFootprintsPositionFile( fn.GetFullPath(), UnitsMM(),
ForceAllSmd(), side );
if( fpcount < 0 )
{
msg.Printf( _( "Unable to create file '%s'." ), GetChars( fn.GetFullPath() ) );
m_reporter->Report( msg, REPORTER::RPT_ERROR );
wxMessageBox( msg );
return false;
}
// Display results
if( !singleFile )
{
msg.Printf( _( "Back side (bottom side) place file: '%s'." ), GetChars( fn.GetFullPath() ) );
m_reporter->Report( msg, REPORTER::RPT_INFO );
msg.Printf( _( "Component count: %d." ), fpcount );
m_reporter->Report( msg, REPORTER::RPT_INFO );
}
if( !singleFile )
{
fullcount += fpcount;
msg.Printf( _( "Full component count: %d\n" ), fullcount );
m_reporter->Report( msg, REPORTER::RPT_INFO );
}
m_reporter->Report( _( "Componment Placement File generation OK." ), REPORTER::RPT_ACTION );
return true;
}
void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
bool redraw = false;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
wxGetMousePosition( &pos.x, &pos.y );
pos.y += 20;
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_MODEDIT_PAD_SETTINGS:
case ID_PCB_USER_GRID_SETUP:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM:
case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
case ID_POPUP_PCB_DELETE_EDGE:
case ID_POPUP_PCB_DELETE_TEXTMODULE:
case ID_POPUP_PCB_DELETE_PAD:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_MIRROR_X_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
default:
if( m_canvas->IsMouseCaptured() )
{
// for all other commands: stop the move in progress
m_canvas->CallEndMouseCapture( &dc );
}
if( id != ID_POPUP_CANCEL_CURRENT_COMMAND )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
switch( id )
{
case ID_EXIT:
Close( true );
break;
case ID_MODEDIT_SELECT_CURRENT_LIB:
Select_Active_Library();
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME * viewer = FOOTPRINT_VIEWER_FRAME::GetActiveFootprintViewer();
if( viewer == NULL )
{
viewer = new FOOTPRINT_VIEWER_FRAME( this, NULL );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
if( viewer->IsIconized() )
viewer->Iconize( false );
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_MODEDIT_DELETE_PART:
DeleteModuleFromCurrentLibrary();
break;
case ID_MODEDIT_NEW_MODULE:
{
Clear_Pcb( true );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
MODULE* module = Create_1_Module( wxEmptyString );
if( module ) // i.e. if create module command not aborted
{
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
redraw = true;
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
Zoom_Automatique( false );
}
}
break;
case ID_MODEDIT_NEW_MODULE_FROM_WIZARD:
{
Clear_Pcb( true );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
wxSemaphore semaphore( 0, 1 );
FOOTPRINT_WIZARD_FRAME *wizard = new FOOTPRINT_WIZARD_FRAME( this, &semaphore,
KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT );
wizard->Show( true );
wizard->Zoom_Automatique( false );
while( semaphore.TryWait() == wxSEMA_BUSY ) // Wait for viewer closing event
{
wxYield();
wxMilliSleep( 50 );
}
MODULE* module = wizard->GetBuiltFootprint();
if( module ) // i.e. if create module command not aborted
{
/* Here we should make a copy of the object before adding to board*/
module->SetParent( (EDA_ITEM*)GetBoard() );
GetBoard()->m_Modules.Append( module );
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
redraw = true;
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
}
wizard->Destroy();
}
break;
case ID_MODEDIT_SAVE_LIBMODULE:
if( GetBoard()->m_Modules && getLibPath() != wxEmptyString )
{
Save_Module_In_Library( getLibPath(), GetBoard()->m_Modules, true, true );
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_INSERT_MODULE_IN_BOARD:
case ID_MODEDIT_UPDATE_MODULE_IN_BOARD:
{
// update module in the current board,
// not just add it to the board with total disregard for the netlist...
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) GetParent();
BOARD* mainpcb = pcbframe->GetBoard();
MODULE* source_module = NULL;
MODULE* module_in_edit = GetBoard()->m_Modules;
// Search the old module (source) if exists
// Because this source could be deleted when editing the main board...
if( module_in_edit->m_Link ) // this is not a new module ...
{
source_module = mainpcb->m_Modules;
for( ; source_module != NULL; source_module = (MODULE*) source_module->Next() )
{
if( module_in_edit->m_Link == source_module->GetTimeStamp() )
break;
}
}
if( ( source_module == NULL )
&& ( id == ID_MODEDIT_UPDATE_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "Unable to find the footprint source on the main board" ) );
msg << _( "\nCannot update the footprint" );
DisplayError( this, msg );
break;
}
if( ( source_module != NULL )
&& ( id == ID_MODEDIT_INSERT_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "A footprint source was found on the main board" ) );
msg << _( "\nCannot insert this footprint" );
DisplayError( this, msg );
break;
}
// Create the "new" module
MODULE* newmodule = new MODULE( *module_in_edit );
newmodule->SetParent( mainpcb );
newmodule->m_Link = 0;
// Put the footprint in the main pcb linked list.
mainpcb->Add( newmodule );
if( source_module ) // this is an update command
{
// In the main board,
// the new module replace the old module (pos, orient, ref, value
// and connexions are kept)
// and the source_module (old module) is deleted
PICKED_ITEMS_LIST pickList;
pcbframe->Exchange_Module( source_module, newmodule, &pickList );
newmodule->SetTimeStamp( module_in_edit->m_Link );
if( pickList.GetCount() )
pcbframe->SaveCopyInUndoList( pickList, UR_UNSPECIFIED );
}
else // This is an insert command
{
wxPoint cursor_pos = pcbframe->GetScreen()->GetCrossHairPosition();
pcbframe->GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
pcbframe->PlaceModule( newmodule, NULL );
pcbframe->GetScreen()->SetCrossHairPosition( cursor_pos );
newmodule->SetTimeStamp( GetNewTimeStamp() );
pcbframe->SaveCopyInUndoList( newmodule, UR_NEW );
}
newmodule->ClearFlags();
GetScreen()->ClrModify();
pcbframe->SetCurItem( NULL );
mainpcb->m_Status_Pcb = 0;
}
break;
case ID_MODEDIT_IMPORT_PART:
if( ! Clear_Pcb( true ) )
break; // //this command is aborted
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
Import_Module();
redraw = true;
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
GetScreen()->ClrModify();
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_EXPORT_PART:
if( GetBoard()->m_Modules )
Export_Module( GetBoard()->m_Modules );
break;
case ID_MODEDIT_CREATE_NEW_LIB_AND_SAVE_CURRENT_PART:
if( GetBoard()->m_Modules )
{
// CreateModuleLibrary() only creates a new library, does not save footprint
wxString libPath = CreateNewLibrary();
if( libPath.size() )
SaveCurrentModule( &libPath );
}
break;
case ID_MODEDIT_SHEET_SET:
break;
case ID_MODEDIT_LOAD_MODULE:
{
wxString libPath = getLibPath(); // might be empty
wxLogDebug( wxT( "Loading module from library " ) + libPath );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
Clear_Pcb( true );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
Load_Module_From_Library( libPath, true );
redraw = true;
}
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
// if either m_Reference or m_Value are gone, reinstall them -
// otherwise you cannot see what you are doing on board
if( GetBoard() && GetBoard()->m_Modules )
{
TEXTE_MODULE* ref = GetBoard()->m_Modules->m_Reference;
TEXTE_MODULE* val = GetBoard()->m_Modules->m_Value;
if( val && ref )
{
ref->SetType( TEXT_is_REFERENCE ); // just in case ...
if( ref->m_Text.Length() == 0 )
ref->m_Text = L"Ref**";
val->SetType( TEXT_is_VALUE ); // just in case ...
if( val->m_Text.Length() == 0 )
val->m_Text = L"Val**";
}
}
GetScreen()->ClrModify();
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_PAD_SETTINGS:
InstallPadOptionsFrame( NULL );
break;
case ID_MODEDIT_CHECK:
break;
case ID_MODEDIT_EDIT_MODULE_PROPERTIES:
if( GetBoard()->m_Modules )
{
SetCurItem( GetBoard()->m_Modules );
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()-> GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), 900, true );
redraw = true;
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), -900, true );
redraw = true;
break;
case ID_POPUP_PCB_EDIT_MODULE:
{
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->MoveCursorToCrossHair();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetScreen()->GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeletePad( (D_PAD*) GetScreen()->GetCurItem(), false );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
Import_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
// Calls the global change dialog:
DlgGlobalChange_PadSettings( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem() );
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeleteTextModule( (TEXTE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_EDGE:
Start_Move_EdgeMod( (EDGE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetScreen()->GetCurItem()->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
}
break;
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
{
EDGE_MODULE* edge = NULL;
if( GetScreen()->GetCurItem()
&& ( GetScreen()->GetCurItem()->Type() == PCB_MODULE_EDGE_T ) )
{
edge = (EDGE_MODULE*) GetScreen()->GetCurItem();
}
Enter_Edge_Width( edge );
m_canvas->MoveCursorToCrossHair();
if( edge )
m_canvas->Refresh();
}
break;
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_DELETE_EDGE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
RemoveStruct( GetScreen()->GetCurItem() );
SetCurItem( NULL );
break;
case ID_MODEDIT_MODULE_ROTATE:
case ID_MODEDIT_MODULE_MIRROR:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
Transform( (MODULE*) GetScreen()->GetCurItem(), id );
redraw = true;
break;
case ID_PCB_DRAWINGS_WIDTHS_SETUP:
InstallOptionsFrame( pos );
break;
case ID_PCB_PAD_SETUP:
{
BOARD_ITEM* item = GetCurItem();
if( item )
{
if( item->Type() != PCB_PAD_T )
item = NULL;
}
InstallPadOptionsFrame( (D_PAD*) item );
}
break;
case ID_PCB_USER_GRID_SETUP:
InstallGridFrame( pos );
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MIRROR_X_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
default:
DisplayError( this,
wxT( "FOOTPRINT_EDIT_FRAME::Process_Special_Functions error" ) );
break;
}
if( redraw )
m_canvas->Refresh();
}
bool FOOTPRINT_EDIT_FRAME::Load_Module_From_BOARD( MODULE* aModule )
{
MODULE* newModule;
PCB_EDIT_FRAME* frame = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );
if( frame == NULL ) // happens if no board editor opened
return false;
if( aModule == NULL )
{
if( ! frame->GetBoard() || ! frame->GetBoard()->m_Modules )
return false;
aModule = SelectFootprint( frame->GetBoard() );
}
if( aModule == NULL )
return false;
SetCurItem( NULL );
Clear_Pcb( false );
GetBoard()->m_Status_Pcb = 0;
newModule = new MODULE( *aModule );
newModule->SetParent( GetBoard() );
newModule->SetLink( aModule->GetTimeStamp() );
aModule = newModule;
newModule->ClearFlags();
newModule->RunOnChildren( boost::bind( &clearModuleItemFlags, _1 ) );
GetBoard()->Add( newModule );
// Clear references to any net info, because the footprint editor
// does know any thing about nets handled by the current edited board.
// Morever we do not want to save any reference to an unknown net when
// saving the footprint in lib cache
// so we force the ORPHANED dummy net info for all pads
newModule->ClearAllNets();
SetCrossHairPosition( wxPoint( 0, 0 ) );
PlaceModule( newModule, NULL );
newModule->SetPosition( wxPoint( 0, 0 ) ); // cursor in GAL may not be initialized at the moment
// Put it on FRONT layer,
// because this is the default in ModEdit, and in libs
if( newModule->GetLayer() != F_Cu )
newModule->Flip( newModule->GetPosition() );
// Put it in orientation 0,
// because this is the default orientation in ModEdit, and in libs
Rotate_Module( NULL, newModule, 0, false );
GetScreen()->ClrModify();
Zoom_Automatique( false );
if( IsGalCanvasActive() )
updateView();
return true;
}
bool DIALOG_GEN_MODULE_POSITION::CreateFiles()
{
BOARD * brd = m_parent->GetBoard();
wxFileName fn;
wxString msg;
wxString frontLayerName;
wxString backLayerName;
bool singleFile = OneFileOnly();
int fullcount = 0;
// Count the footprints to place, do not yet create a file
int fpcount = m_parent->DoGenFootprintsPositionFile( wxEmptyString, UnitsMM(),
ForceAllSmd(), 2 );
if( fpcount == 0)
{
wxMessageBox( _( "No modules for automated placement." ) );
return false;
}
fn = m_parent->GetBoard()->GetFileName();
fn.SetPath( GetOutputDirectory() );
frontLayerName = brd->GetLayerName( LAYER_N_FRONT );
backLayerName = brd->GetLayerName( LAYER_N_BACK );
// Create the the Front or Top side placement file,
// or the single file
int side = 1;
if( singleFile )
{
side = 2;
fn.SetName( fn.GetName() + wxT( "-" ) + wxT("all") );
}
else
fn.SetName( fn.GetName() + wxT( "-" ) + frontLayerName );
fn.SetExt( FootprintPlaceFileExtension );
fpcount = m_parent->DoGenFootprintsPositionFile( fn.GetFullPath(), UnitsMM(),
ForceAllSmd(), side );
if( fpcount < 0 )
{
msg.Printf( _( "Unable to create <%s>" ), GetChars( fn.GetFullPath() ) );
AddMessage( msg + wxT("\n") );
wxMessageBox( msg );
return false;
}
if( singleFile )
msg.Printf( _( "Place file: <%s>\n" ), GetChars( fn.GetFullPath() ) );
else
msg.Printf( _( "Front side (top side) place file: <%s>\n" ),
GetChars( fn.GetFullPath() ) );
AddMessage( msg );
msg.Printf( _( "Footprint count %d\n" ), fpcount );
AddMessage( msg );
if( singleFile )
return true;
// Create the Back or Bottom side placement file
fullcount = fpcount;
side = 0;
fn = brd->GetFileName();
fn.SetPath( GetOutputDirectory() );
fn.SetName( fn.GetName() + wxT( "-" ) + backLayerName );
fn.SetExt( wxT( "pos" ) );
fpcount = m_parent->DoGenFootprintsPositionFile( fn.GetFullPath(), UnitsMM(),
ForceAllSmd(), side );
if( fpcount < 0 )
{
msg.Printf( _( "Unable to create <%s>" ), GetChars( fn.GetFullPath() ) );
AddMessage( msg + wxT("\n") );
wxMessageBox( msg );
return false;
}
// Display results
if( !singleFile )
{
msg.Printf( _( "Back side (bottom side) place file: <%s>\n" ), GetChars( fn.GetFullPath() ) );
AddMessage( msg );
msg.Printf( _( "Footprint count %d\n" ), fpcount );
AddMessage( msg );
}
if( !singleFile )
{
fullcount += fpcount;
msg.Printf( _( "Full footprint count %d\n" ), fullcount );
AddMessage( msg );
}
return true;
}
void DIALOG_PRINT_USING_PRINTER::initValues( )
{
wxString msg;
BOARD* board = m_parent->GetBoard();
s_Parameters.m_PageSetupData = s_pageSetupData;
// Create layer list.
wxString layerKey;
LSEQ seq = board->GetEnabledLayers().UIOrder();
for( ; seq; ++seq )
{
LAYER_ID layer = *seq;
m_BoxSelectLayer[layer] = new wxCheckBox( this, -1, board->GetLayerName( layer ) );
if( IsCopperLayer( layer ) )
m_CopperLayersBoxSizer->Add( m_BoxSelectLayer[layer],
0, wxGROW | wxALL, 1 );
else
m_TechnicalLayersBoxSizer->Add( m_BoxSelectLayer[layer],
0, wxGROW | wxALL, 1 );
layerKey.Printf( OPTKEY_LAYERBASE, layer );
bool option;
if( m_config->Read( layerKey, &option ) )
m_BoxSelectLayer[layer]->SetValue( option );
else
{
if( s_SelectedLayers[layer] )
m_BoxSelectLayer[layer]->SetValue( true );
}
}
// Option for excluding contents of "Edges Pcb" layer
m_Exclude_Edges_Pcb->Show( true );
// Read the scale adjust option
int scale_idx = 4; // default selected scale = ScaleList[4] = 1.000
if( m_config )
{
m_config->Read( OPTKEY_PRINT_X_FINESCALE_ADJ, &s_Parameters.m_XScaleAdjust );
m_config->Read( OPTKEY_PRINT_Y_FINESCALE_ADJ, &s_Parameters.m_YScaleAdjust );
m_config->Read( OPTKEY_PRINT_SCALE, &scale_idx );
m_config->Read( OPTKEY_PRINT_PAGE_FRAME, &s_Parameters.m_Print_Sheet_Ref, 1);
m_config->Read( OPTKEY_PRINT_MONOCHROME_MODE, &s_Parameters.m_Print_Black_and_White, 1);
m_config->Read( OPTKEY_PRINT_PAGE_PER_LAYER, &s_Parameters.m_OptionPrintPage, 0);
int tmp;
m_config->Read( OPTKEY_PRINT_PADS_DRILL, &tmp, PRINT_PARAMETERS::SMALL_DRILL_SHAPE );
s_Parameters.m_DrillShapeOpt = (PRINT_PARAMETERS::DrillShapeOptT) tmp;
// Test for a reasonnable scale value. Set to 1 if problem
if( s_Parameters.m_XScaleAdjust < MIN_SCALE ||
s_Parameters.m_YScaleAdjust < MIN_SCALE ||
s_Parameters.m_XScaleAdjust > MAX_SCALE ||
s_Parameters.m_YScaleAdjust > MAX_SCALE )
s_Parameters.m_XScaleAdjust = s_Parameters.m_YScaleAdjust = 1.0;
s_SelectedLayers = LSET();
for( seq.Rewind(); seq; ++seq )
{
LAYER_ID layer = *seq;
wxString layerKey;
bool option;
layerKey.Printf( OPTKEY_LAYERBASE, layer );
option = false;
if( m_config->Read( layerKey, &option ) )
{
m_BoxSelectLayer[layer]->SetValue( option );
if( option )
s_SelectedLayers.set( layer );
}
}
}
m_ScaleOption->SetSelection( scale_idx );
scale_idx = m_ScaleOption->GetSelection();
s_Parameters.m_PrintScale = s_ScaleList[scale_idx];
m_Print_Mirror->SetValue(s_Parameters.m_PrintMirror);
m_Exclude_Edges_Pcb->SetValue(m_ExcludeEdgeLayer);
m_Print_Sheet_Ref->SetValue( s_Parameters.m_Print_Sheet_Ref );
// Options to plot pads and vias holes
m_Drill_Shape_Opt->SetSelection( s_Parameters.m_DrillShapeOpt );
if( s_Parameters.m_Print_Black_and_White )
m_ModeColorOption->SetSelection( 1 );
else
m_ModeColorOption->SetSelection( 0 );
m_PagesOption->SetSelection(s_Parameters.m_OptionPrintPage);
s_Parameters.m_PenDefaultSize = g_DrawDefaultLineThickness;
AddUnitSymbol( *m_TextPenWidth, g_UserUnit );
m_DialogPenWidth->SetValue(
StringFromValue( g_UserUnit, s_Parameters.m_PenDefaultSize ) );
// Create scale adjust option
msg.Printf( wxT( "%f" ), s_Parameters.m_XScaleAdjust );
m_FineAdjustXscaleOpt->SetValue( msg );
msg.Printf( wxT( "%f" ), s_Parameters.m_YScaleAdjust );
m_FineAdjustYscaleOpt->SetValue( msg );
bool enable = (s_Parameters.m_PrintScale == 1.0);
m_FineAdjustXscaleOpt->Enable(enable);
m_FineAdjustYscaleOpt->Enable(enable);
}
