void DIALOG_PLOT::applyPlotSettings()
{
REPORTER& reporter = m_messagesPanel->Reporter();
PCB_PLOT_PARAMS tempOptions;
tempOptions.SetExcludeEdgeLayer( m_excludeEdgeLayerOpt->GetValue() );
tempOptions.SetSubtractMaskFromSilk( m_subtractMaskFromSilk->GetValue() );
tempOptions.SetPlotFrameRef( m_plotSheetRef->GetValue() );
tempOptions.SetPlotPadsOnSilkLayer( m_plotPads_on_Silkscreen->GetValue() );
tempOptions.SetUseAuxOrigin( m_useAuxOriginCheckBox->GetValue() );
tempOptions.SetPlotValue( m_plotModuleValueOpt->GetValue() );
tempOptions.SetPlotReference( m_plotModuleRefOpt->GetValue() );
tempOptions.SetPlotInvisibleText( m_plotInvisibleText->GetValue() );
tempOptions.SetScaleSelection( m_scaleOpt->GetSelection() );
tempOptions.SetDrillMarksType( static_cast<PCB_PLOT_PARAMS::DrillMarksType>
( m_drillShapeOpt->GetSelection() ) );
tempOptions.SetMirror( m_plotMirrorOpt->GetValue() );
tempOptions.SetPlotMode( m_plotModeOpt->GetSelection() == 1 ? SKETCH : FILLED );
tempOptions.SetDXFPlotPolygonMode( m_DXF_plotModeOpt->GetValue() );
tempOptions.SetPlotViaOnMaskLayer( m_plotNoViaOnMaskOpt->GetValue() );
if( !m_DXF_plotTextStrokeFontOpt->IsEnabled() ) // Currently, only DXF supports this option
tempOptions.SetTextMode( PLOTTEXTMODE_DEFAULT );
else
tempOptions.SetTextMode( m_DXF_plotTextStrokeFontOpt->GetValue() ?
PLOTTEXTMODE_DEFAULT : PLOTTEXTMODE_NATIVE );
// Update settings from text fields. Rewrite values back to the fields,
// since the values may have been constrained by the setters.
// read HPLG pen size (this param is stored in mils)
wxString msg = m_HPGLPenSizeOpt->GetValue();
int tmp = ValueFromString( g_UserUnit, msg ) / IU_PER_MILS;
if( !tempOptions.SetHPGLPenDiameter( tmp ) )
{
msg = StringFromValue( g_UserUnit, tempOptions.GetHPGLPenDiameter() * IU_PER_MILS );
m_HPGLPenSizeOpt->SetValue( msg );
msg.Printf( _( "HPGL pen size constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
// Default linewidth
msg = m_linesWidth->GetValue();
tmp = ValueFromString( g_UserUnit, msg );
if( !tempOptions.SetLineWidth( tmp ) )
{
msg = StringFromValue( g_UserUnit, tempOptions.GetLineWidth() );
m_linesWidth->SetValue( msg );
msg.Printf( _( "Default line width constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
// X scale
double tmpDouble;
msg = m_fineAdjustXscaleOpt->GetValue();
msg.ToDouble( &tmpDouble );
if( !setDouble( &m_XScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
{
msg.Printf( wxT( "%f" ), m_XScaleAdjust );
m_fineAdjustXscaleOpt->SetValue( msg );
msg.Printf( _( "X scale constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_X_FINESCALE_ADJ, m_XScaleAdjust );
// Y scale
msg = m_fineAdjustYscaleOpt->GetValue();
msg.ToDouble( &tmpDouble );
if( !setDouble( &m_YScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
{
msg.Printf( wxT( "%f" ), m_YScaleAdjust );
m_fineAdjustYscaleOpt->SetValue( msg );
msg.Printf( _( "Y scale constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_Y_FINESCALE_ADJ, m_YScaleAdjust );
// PS Width correction
msg = m_PSFineAdjustWidthOpt->GetValue();
int itmp = ValueFromString( g_UserUnit, msg );
if( !setInt( &m_PSWidthAdjust, itmp, m_widthAdjustMinValue, m_widthAdjustMaxValue ) )
{
msg = StringFromValue( g_UserUnit, m_PSWidthAdjust );
m_PSFineAdjustWidthOpt->SetValue( msg );
msg.Printf( _( "Width correction constrained. "
"The reasonable width correction value must be in a range of "
" [%+f; %+f] (%s) for current design rules. " ),
To_User_Unit( g_UserUnit, m_widthAdjustMinValue ),
To_User_Unit( g_UserUnit, m_widthAdjustMaxValue ),
( g_UserUnit == INCHES ) ? wxT( "\"" ) : wxT( "mm" ) );
reporter.Report( msg, REPORTER::RPT_WARNING );
}
// Store m_PSWidthAdjust in mm in user config
ConfigBaseWriteDouble( m_config, CONFIG_PS_FINEWIDTH_ADJ,
(double)m_PSWidthAdjust / IU_PER_MM );
tempOptions.SetFormat( getPlotFormat() );
tempOptions.SetUseGerberProtelExtensions( m_useGerberExtensions->GetValue() );
tempOptions.SetUseGerberAttributes( m_useGerberX2Attributes->GetValue() );
tempOptions.SetIncludeGerberNetlistInfo( m_useGerberNetAttributes->GetValue() );
tempOptions.SetCreateGerberJobFile( m_generateGerberJobFile->GetValue() );
tempOptions.SetGerberPrecision( m_rbGerberFormat->GetSelection() == 0 ? 5 : 6 );
LSET selectedLayers;
for( unsigned i = 0; i < m_layerList.size(); i++ )
{
if( m_layerCheckListBox->IsChecked( i ) )
selectedLayers.set( m_layerList[i] );
}
// Get a list of copper layers that aren't being used by inverting enabled layers.
LSET disabledCopperLayers = LSET::AllCuMask() & ~m_board->GetEnabledLayers();
// Enable all of the disabled copper layers.
// If someone enables more copper layers they will be selected by default.
selectedLayers = selectedLayers | disabledCopperLayers;
tempOptions.SetLayerSelection( selectedLayers );
tempOptions.SetNegative( m_plotPSNegativeOpt->GetValue() );
tempOptions.SetA4Output( m_forcePSA4OutputOpt->GetValue() );
// Set output directory and replace backslashes with forward ones
wxString dirStr;
dirStr = m_outputDirectoryName->GetValue();
dirStr.Replace( wxT( "\\" ), wxT( "/" ) );
tempOptions.SetOutputDirectory( dirStr );
if( !m_plotOpts.IsSameAs( tempOptions, false ) )
{
// First, mark board as modified only for parameters saved in file
if( !m_plotOpts.IsSameAs( tempOptions, true ) )
m_parent->OnModify();
// Now, save any change, for the session
m_parent->SetPlotSettings( tempOptions );
m_plotOpts = tempOptions;
}
}
void PlotOneBoardLayer( BOARD *aBoard, PLOTTER* aPlotter, LAYER_NUM aLayer,
const PCB_PLOT_PARAMS& aPlotOpt )
{
PCB_PLOT_PARAMS plotOpt = aPlotOpt;
int soldermask_min_thickness = aBoard->GetDesignSettings().m_SolderMaskMinWidth;
// Set a default color and the text mode for this layer
aPlotter->SetColor( aPlotOpt.GetColor() );
aPlotter->SetTextMode( aPlotOpt.GetTextMode() );
// Specify that the contents of the "Edges Pcb" layer are to be plotted
// in addition to the contents of the currently specified layer.
LAYER_MSK layer_mask = GetLayerMask( aLayer );
if( !aPlotOpt.GetExcludeEdgeLayer() )
layer_mask |= EDGE_LAYER;
switch( aLayer )
{
case FIRST_COPPER_LAYER:
case LAYER_N_2:
case LAYER_N_3:
case LAYER_N_4:
case LAYER_N_5:
case LAYER_N_6:
case LAYER_N_7:
case LAYER_N_8:
case LAYER_N_9:
case LAYER_N_10:
case LAYER_N_11:
case LAYER_N_12:
case LAYER_N_13:
case LAYER_N_14:
case LAYER_N_15:
case LAST_COPPER_LAYER:
// Skip NPTH pads on copper layers ( only if hole size == pad size ):
plotOpt.SetSkipPlotNPTH_Pads( true );
// Drill mark will be plotted,
// if drill mark is SMALL_DRILL_SHAPE or FULL_DRILL_SHAPE
PlotStandardLayer( aBoard, aPlotter, layer_mask, plotOpt );
break;
case SOLDERMASK_N_BACK:
case SOLDERMASK_N_FRONT:
plotOpt.SetSkipPlotNPTH_Pads( false );
// Disable plot pad holes
plotOpt.SetDrillMarksType( PCB_PLOT_PARAMS::NO_DRILL_SHAPE );
// Plot solder mask:
if( soldermask_min_thickness == 0 )
PlotStandardLayer( aBoard, aPlotter, layer_mask, plotOpt );
else
PlotSolderMaskLayer( aBoard, aPlotter, layer_mask, plotOpt,
soldermask_min_thickness );
break;
case SOLDERPASTE_N_BACK:
case SOLDERPASTE_N_FRONT:
plotOpt.SetSkipPlotNPTH_Pads( false );
// Disable plot pad holes
plotOpt.SetDrillMarksType( PCB_PLOT_PARAMS::NO_DRILL_SHAPE );
PlotStandardLayer( aBoard, aPlotter, layer_mask, plotOpt );
break;
case SILKSCREEN_N_FRONT:
case SILKSCREEN_N_BACK:
PlotSilkScreen( aBoard, aPlotter, layer_mask, plotOpt );
// Gerber: Subtract soldermask from silkscreen if enabled
if( aPlotter->GetPlotterType() == PLOT_FORMAT_GERBER
&& plotOpt.GetSubtractMaskFromSilk() )
{
if( aLayer == SILKSCREEN_N_FRONT )
layer_mask = GetLayerMask( SOLDERMASK_N_FRONT );
else
layer_mask = GetLayerMask( SOLDERMASK_N_BACK );
// Create the mask to subtract by creating a negative layer polarity
aPlotter->SetLayerPolarity( false );
// Disable plot pad holes
plotOpt.SetDrillMarksType( PCB_PLOT_PARAMS::NO_DRILL_SHAPE );
// Plot the mask
PlotStandardLayer( aBoard, aPlotter, layer_mask, plotOpt );
}
break;
default:
PlotSilkScreen( aBoard, aPlotter, layer_mask, plotOpt );
break;
}
}
void DIALOG_PLOT::applyPlotSettings()
{
REPORTER& reporter = m_messagesPanel->Reporter();
PCB_PLOT_PARAMS tempOptions;
tempOptions.SetExcludeEdgeLayer( m_excludeEdgeLayerOpt->GetValue() );
tempOptions.SetSubtractMaskFromSilk( m_subtractMaskFromSilk->GetValue() );
tempOptions.SetPlotFrameRef( m_plotSheetRef->GetValue() );
tempOptions.SetPlotPadsOnSilkLayer( m_plotPads_on_Silkscreen->GetValue() );
tempOptions.SetUseAuxOrigin( m_useAuxOriginCheckBox->GetValue() );
tempOptions.SetPlotValue( m_plotModuleValueOpt->GetValue() );
tempOptions.SetPlotReference( m_plotModuleRefOpt->GetValue() );
tempOptions.SetPlotInvisibleText( m_plotInvisibleText->GetValue() );
tempOptions.SetScaleSelection( m_scaleOpt->GetSelection() );
tempOptions.SetDrillMarksType( static_cast<PCB_PLOT_PARAMS::DrillMarksType>
( m_drillShapeOpt->GetSelection() ) );
tempOptions.SetMirror( m_plotMirrorOpt->GetValue() );
tempOptions.SetPlotMode( m_plotModeOpt->GetSelection() == 1 ? SKETCH : FILLED );
tempOptions.SetPlotViaOnMaskLayer( m_plotNoViaOnMaskOpt->GetValue() );
// Update settings from text fields. Rewrite values back to the fields,
// since the values may have been constrained by the setters.
// read HPLG pen size (this param is stored in mils)
wxString msg = m_HPGLPenSizeOpt->GetValue();
int tmp = ValueFromString( g_UserUnit, msg ) / IU_PER_MILS;
if( !tempOptions.SetHPGLPenDiameter( tmp ) )
{
msg = StringFromValue( g_UserUnit, tempOptions.GetHPGLPenDiameter() * IU_PER_MILS );
m_HPGLPenSizeOpt->SetValue( msg );
msg.Printf( _( "HPGL pen size constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
// Read HPGL pen overlay (this param is stored in mils)
msg = m_HPGLPenOverlayOpt->GetValue();
tmp = ValueFromString( g_UserUnit, msg ) / IU_PER_MILS;
if( !tempOptions.SetHPGLPenOverlay( tmp ) )
{
msg = StringFromValue( g_UserUnit,
tempOptions.GetHPGLPenOverlay() * IU_PER_MILS );
m_HPGLPenOverlayOpt->SetValue( msg );
msg.Printf( _( "HPGL pen overlay constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
// Default linewidth
msg = m_linesWidth->GetValue();
tmp = ValueFromString( g_UserUnit, msg );
if( !tempOptions.SetLineWidth( tmp ) )
{
msg = StringFromValue( g_UserUnit, tempOptions.GetLineWidth() );
m_linesWidth->SetValue( msg );
msg.Printf( _( "Default line width constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
// X scale
double tmpDouble;
msg = m_fineAdjustXscaleOpt->GetValue();
msg.ToDouble( &tmpDouble );
if( !setDouble( &m_XScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
{
msg.Printf( wxT( "%f" ), m_XScaleAdjust );
m_fineAdjustXscaleOpt->SetValue( msg );
msg.Printf( _( "X scale constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_X_FINESCALE_ADJ, m_XScaleAdjust );
// Y scale
msg = m_fineAdjustYscaleOpt->GetValue();
msg.ToDouble( &tmpDouble );
if( !setDouble( &m_YScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
{
msg.Printf( wxT( "%f" ), m_YScaleAdjust );
m_fineAdjustYscaleOpt->SetValue( msg );
msg.Printf( _( "Y scale constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_Y_FINESCALE_ADJ, m_YScaleAdjust );
// PS Width correction
msg = m_PSFineAdjustWidthOpt->GetValue();
int itmp = ValueFromString( g_UserUnit, msg );
if( !setInt( &m_PSWidthAdjust, itmp, m_widthAdjustMinValue, m_widthAdjustMaxValue ) )
{
msg = StringFromValue( g_UserUnit, m_PSWidthAdjust );
m_PSFineAdjustWidthOpt->SetValue( msg );
msg.Printf( _( "Width correction constrained. "
"The reasonable width correction value must be in a range of "
" [%+f; %+f] (%s) for current design rules. " ),
To_User_Unit( g_UserUnit, m_widthAdjustMinValue ),
To_User_Unit( g_UserUnit, m_widthAdjustMaxValue ),
( g_UserUnit == INCHES ) ? wxT( "\"" ) : wxT( "mm" ) );
reporter.Report( msg, REPORTER::RPT_WARNING );
}
// Store m_PSWidthAdjust in mm in user config
ConfigBaseWriteDouble( m_config, CONFIG_PS_FINEWIDTH_ADJ,
(double)m_PSWidthAdjust / IU_PER_MM );
tempOptions.SetFormat( getPlotFormat() );
tempOptions.SetUseGerberExtensions( m_useGerberExtensions->GetValue() );
tempOptions.SetUseGerberAttributes( m_useGerberAttributes->GetValue() );
tempOptions.SetGerberPrecision( m_rbGerberFormat->GetSelection() == 0 ? 5 : 6 );
LSET selectedLayers;
for( unsigned i = 0; i < m_layerList.size(); i++ )
{
if( m_layerCheckListBox->IsChecked( i ) )
selectedLayers.set( m_layerList[i] );
}
tempOptions.SetLayerSelection( selectedLayers );
tempOptions.SetNegative( m_plotPSNegativeOpt->GetValue() );
tempOptions.SetA4Output( m_forcePSA4OutputOpt->GetValue() );
// Set output directory and replace backslashes with forward ones
wxString dirStr;
dirStr = m_outputDirectoryName->GetValue();
dirStr.Replace( wxT( "\\" ), wxT( "/" ) );
tempOptions.SetOutputDirectory( dirStr );
if( m_plotOpts != tempOptions )
{
m_parent->SetPlotSettings( tempOptions );
m_plotOpts = tempOptions;
m_parent->OnModify();
}
}
void PlotOneBoardLayer( BOARD *aBoard, PLOTTER* aPlotter, LAYER_ID aLayer,
const PCB_PLOT_PARAMS& aPlotOpt )
{
PCB_PLOT_PARAMS plotOpt = aPlotOpt;
int soldermask_min_thickness = aBoard->GetDesignSettings().m_SolderMaskMinWidth;
// Set a default color and the text mode for this layer
aPlotter->SetColor( aPlotOpt.GetColor() );
aPlotter->SetTextMode( aPlotOpt.GetTextMode() );
// Specify that the contents of the "Edges Pcb" layer are to be plotted
// in addition to the contents of the currently specified layer.
LSET layer_mask( aLayer );
if( !aPlotOpt.GetExcludeEdgeLayer() )
layer_mask.set( Edge_Cuts );
if( IsCopperLayer( aLayer ) )
{
// Skip NPTH pads on copper layers ( only if hole size == pad size ):
// Drill mark will be plotted,
// if drill mark is SMALL_DRILL_SHAPE or FULL_DRILL_SHAPE
if( plotOpt.GetFormat() == PLOT_FORMAT_DXF )
{
plotOpt.SetSkipPlotNPTH_Pads( false );
PlotLayerOutlines( aBoard, aPlotter, layer_mask, plotOpt );
}
else
{
plotOpt.SetSkipPlotNPTH_Pads( true );
PlotStandardLayer( aBoard, aPlotter, layer_mask, plotOpt );
}
}
else
{
switch( aLayer )
{
case B_Mask:
case F_Mask:
plotOpt.SetSkipPlotNPTH_Pads( false );
// Disable plot pad holes
plotOpt.SetDrillMarksType( PCB_PLOT_PARAMS::NO_DRILL_SHAPE );
// Plot solder mask:
if( soldermask_min_thickness == 0 )
{
if( plotOpt.GetFormat() == PLOT_FORMAT_DXF )
PlotLayerOutlines( aBoard, aPlotter, layer_mask, plotOpt );
else
PlotStandardLayer( aBoard, aPlotter, layer_mask, plotOpt );
}
else
PlotSolderMaskLayer( aBoard, aPlotter, layer_mask, plotOpt,
soldermask_min_thickness );
break;
case B_Adhes:
case F_Adhes:
case B_Paste:
case F_Paste:
plotOpt.SetSkipPlotNPTH_Pads( false );
// Disable plot pad holes
plotOpt.SetDrillMarksType( PCB_PLOT_PARAMS::NO_DRILL_SHAPE );
if( plotOpt.GetFormat() == PLOT_FORMAT_DXF )
PlotLayerOutlines( aBoard, aPlotter, layer_mask, plotOpt );
else
PlotStandardLayer( aBoard, aPlotter, layer_mask, plotOpt );
break;
case F_SilkS:
case B_SilkS:
if( plotOpt.GetFormat() == PLOT_FORMAT_DXF )
PlotLayerOutlines( aBoard, aPlotter, layer_mask, plotOpt );
else
PlotSilkScreen( aBoard, aPlotter, layer_mask, plotOpt );
// Gerber: Subtract soldermask from silkscreen if enabled
if( aPlotter->GetPlotterType() == PLOT_FORMAT_GERBER
&& plotOpt.GetSubtractMaskFromSilk() )
{
if( aLayer == F_SilkS )
layer_mask = LSET( F_Mask );
else
layer_mask = LSET( B_Mask );
// Create the mask to subtract by creating a negative layer polarity
aPlotter->SetLayerPolarity( false );
// Disable plot pad holes
plotOpt.SetDrillMarksType( PCB_PLOT_PARAMS::NO_DRILL_SHAPE );
// Plot the mask
PlotStandardLayer( aBoard, aPlotter, layer_mask, plotOpt );
}
break;
// These layers are plotted like silk screen layers.
// Mainly, pads on these layers are not filled.
// This is not necessary the best choice.
case Dwgs_User:
case Cmts_User:
case Eco1_User:
case Eco2_User:
case Edge_Cuts:
case Margin:
case F_CrtYd:
case B_CrtYd:
case F_Fab:
case B_Fab:
plotOpt.SetSkipPlotNPTH_Pads( false );
plotOpt.SetDrillMarksType( PCB_PLOT_PARAMS::NO_DRILL_SHAPE );
if( plotOpt.GetFormat() == PLOT_FORMAT_DXF )
PlotLayerOutlines( aBoard, aPlotter, layer_mask, plotOpt );
else
PlotSilkScreen( aBoard, aPlotter, layer_mask, plotOpt );
break;
default:
plotOpt.SetSkipPlotNPTH_Pads( false );
plotOpt.SetDrillMarksType( PCB_PLOT_PARAMS::NO_DRILL_SHAPE );
if( plotOpt.GetFormat() == PLOT_FORMAT_DXF )
PlotLayerOutlines( aBoard, aPlotter, layer_mask, plotOpt );
else
PlotStandardLayer( aBoard, aPlotter, layer_mask, plotOpt );
break;
}
}
}
