/*!
Attempts to make a connection to the service identified by \a uuid on the device with address
\a address.
The socket is opened in the given \a openMode.
For BlueZ, the socket first enters the \l ServiceLookupState and queries the connection parameters for
\a uuid. If the service parameters are successfully retrieved the socket enters
ConnectingState, and attempts to connect to \a address. If a connection is established,
QBluetoothSocket enters Connected State and emits connected().
On BlackBerry and Android, the service connection can directly be established
using the UUID of the remote service. Therefore these platforms do not require
the \l ServiceLookupState and \l socketType() is always set to
\l QBluetoothServiceInfo::RfcommProtocol.
At any point, the socket can emit error() to signal that an error occurred.
Note that most platforms require a pairing prior to connecting to the remote device. Otherwise
the connection process may fail.
\sa state(), disconnectFromService()
*/
void QBluetoothSocket::connectToService(const QBluetoothAddress &address, const QBluetoothUuid &uuid, OpenMode openMode)
{
Q_D(QBluetoothSocket);
if (state() != QBluetoothSocket::UnconnectedState) {
qCWarning(QT_BT) << "QBluetoothSocket::connectToService called on busy socket";
d->errorString = QBluetoothSocket::tr("Trying to connect while connection is in progress");
setSocketError(QBluetoothSocket::OperationError);
return;
}
#if defined(QT_QNX_BLUETOOTH) || defined(QT_ANDROID_BLUETOOTH)
if (!d->ensureNativeSocket(QBluetoothServiceInfo::RfcommProtocol)) {
d->errorString = tr("Socket type not supported");
setSocketError(QBluetoothSocket::UnsupportedProtocolError);
return;
}
d->connectToService(address, uuid, openMode);
#else
QBluetoothServiceInfo service;
QBluetoothDeviceInfo device(address, QString(), QBluetoothDeviceInfo::MiscellaneousDevice);
service.setDevice(device);
service.setServiceUuid(uuid);
doDeviceDiscovery(service, openMode);
#endif
}
void Tennis::nearFieldHandover()
{
qDebug() << "Connecting to NFC provided address" << m_handover->bluetoothAddress().toString();
QBluetoothDeviceInfo device = QBluetoothDeviceInfo(m_handover->bluetoothAddress(), QString(),
QBluetoothDeviceInfo::ComputerDevice);
QBluetoothServiceInfo service;
service.setServiceUuid(QBluetoothUuid(serviceUuid));
service.setDevice(device);
QBluetoothServiceInfo::Sequence protocolDescriptorList;
QBluetoothServiceInfo::Sequence protocol;
protocol << QVariant::fromValue(QBluetoothUuid(QBluetoothUuid::L2cap))
<< QVariant::fromValue(m_handover->serverPort());
protocolDescriptorList.append(QVariant::fromValue(protocol));
service.setAttribute(QBluetoothServiceInfo::ProtocolDescriptorList,
protocolDescriptorList);
client->startClient(service);
board->setStatus(tr("Connecting: %1 %2").arg(m_handover->bluetoothAddress().toString()).arg(m_handover->serverPort()), 100, 25);
}
static PyObject *meth_QBluetoothServiceInfo_setServiceUuid(PyObject *sipSelf, PyObject *sipArgs)
{
PyObject *sipParseErr = NULL;
{
const QBluetoothUuid* a0;
QBluetoothServiceInfo *sipCpp;
if (sipParseArgs(&sipParseErr, sipArgs, "BJ9", &sipSelf, sipType_QBluetoothServiceInfo, &sipCpp, sipType_QBluetoothUuid, &a0))
{
sipCpp->setServiceUuid(*a0);
Py_INCREF(Py_None);
return Py_None;
}
}
/* Raise an exception if the arguments couldn't be parsed. */
sipNoMethod(sipParseErr, sipName_QBluetoothServiceInfo, sipName_setServiceUuid, doc_QBluetoothServiceInfo_setServiceUuid);
return NULL;
}
void QBluetoothServiceDiscoveryAgentPrivate::populateDiscoveredServices(const QBluetoothDeviceInfo &remoteDevice, const QList<QBluetoothUuid> &uuids)
{
/* Android doesn't provide decent SDP data. A list of uuids is close to meaning-less
*
* The following approach is chosen:
* - If we see an SPP service class and we see
* one or more custom uuids we match them up. Such services will always be SPP services.
* - If we see a custom uuid but no SPP uuid then we return
* BluetoothServiceInfo instance with just a servuceUuid (no service class set)
* - Any other service uuid will stand on its own.
* */
Q_Q(QBluetoothServiceDiscoveryAgent);
//find SPP and custom uuid
QBluetoothUuid uuid;
int sppIndex = -1;
QVector<int> customUuids;
for (int i = 0; i < uuids.count(); i++) {
uuid = uuids.at(i);
if (uuid.isNull())
continue;
//check for SPP protocol
bool ok = false;
quint16 uuid16 = uuid.toUInt16(&ok);
if (ok && uuid16 == QBluetoothUuid::SerialPort)
sppIndex = i;
//check for custom uuid
if (uuid.minimumSize() == 16)
customUuids.append(i);
}
for (int i = 0; i < uuids.count(); i++) {
if (i == sppIndex && !customUuids.isEmpty())
continue;
QBluetoothServiceInfo serviceInfo;
serviceInfo.setDevice(remoteDevice);
QBluetoothServiceInfo::Sequence protocolDescriptorList;
{
QBluetoothServiceInfo::Sequence protocol;
protocol << QVariant::fromValue(QBluetoothUuid(QBluetoothUuid::L2cap));
protocolDescriptorList.append(QVariant::fromValue(protocol));
}
if (customUuids.contains(i) && sppIndex > -1) {
//we have a custom uuid of service class type SPP
//set rfcomm protocol
QBluetoothServiceInfo::Sequence protocol;
protocol << QVariant::fromValue(QBluetoothUuid(QBluetoothUuid::Rfcomm))
<< QVariant::fromValue(0);
protocolDescriptorList.append(QVariant::fromValue(protocol));
//set SPP service class uuid
QBluetoothServiceInfo::Sequence classId;
classId << QVariant::fromValue(QBluetoothUuid(QBluetoothUuid::SerialPort));
serviceInfo.setAttribute(QBluetoothServiceInfo::BluetoothProfileDescriptorList,
classId);
classId.prepend(QVariant::fromValue(uuids.at(i)));
serviceInfo.setAttribute(QBluetoothServiceInfo::ServiceClassIds, classId);
serviceInfo.setServiceName(QBluetoothServiceDiscoveryAgent::tr("Serial Port Profile"));
serviceInfo.setServiceUuid(uuids.at(i));
} else if (sppIndex == i && customUuids.isEmpty()) {
//set rfcomm protocol
QBluetoothServiceInfo::Sequence protocol;
protocol << QVariant::fromValue(QBluetoothUuid(QBluetoothUuid::Rfcomm))
<< QVariant::fromValue(0);
protocolDescriptorList.append(QVariant::fromValue(protocol));
QBluetoothServiceInfo::Sequence classId;
classId << QVariant::fromValue(QBluetoothUuid(QBluetoothUuid::SerialPort));
serviceInfo.setAttribute(QBluetoothServiceInfo::BluetoothProfileDescriptorList,
classId);
//also we need to set the custom uuid to the SPP uuid
//otherwise QBluetoothSocket::connectToService() would fail due to a missing service uuid
serviceInfo.setServiceUuid(uuids.at(i));
} else if (customUuids.contains(i)) {
//custom uuid but no serial port
serviceInfo.setServiceUuid(uuids.at(i));
}
//Check if the UUID is in the uuidFilter
if (!uuidFilter.isEmpty() && !uuidFilter.contains(serviceInfo.serviceUuid()))
continue;
serviceInfo.setAttribute(QBluetoothServiceInfo::ProtocolDescriptorList, protocolDescriptorList);
serviceInfo.setAttribute(QBluetoothServiceInfo::BrowseGroupList,
QBluetoothUuid(QBluetoothUuid::PublicBrowseGroup));
if (!customUuids.contains(i)) {
//if we don't have custom uuid use it as class id as well
QBluetoothServiceInfo::Sequence classId;
classId << QVariant::fromValue(uuids.at(i));
serviceInfo.setAttribute(QBluetoothServiceInfo::ServiceClassIds, classId);
QBluetoothUuid::ServiceClassUuid clsId
= static_cast<QBluetoothUuid::ServiceClassUuid>(uuids.at(i).toUInt16());
serviceInfo.setServiceName(QBluetoothUuid::serviceClassToString(clsId));
}
//don't include the service if we already discovered it before
if (!isDuplicatedService(serviceInfo)) {
discoveredServices << serviceInfo;
//qCDebug(QT_BT_ANDROID) << serviceInfo;
emit q->serviceDiscovered(serviceInfo);
}
}
}
int main(int argc, char *argv[])
{
QCoreApplication app(argc, argv);
RfCommClient client;
QBluetoothLocalDevice localDevice;
MyThread mythread;
QObject::connect(&client, SIGNAL(done()), &app, SLOT(quit()));
QString address;
QString port;
QStringList args = QCoreApplication::arguments();
if(args.length() >= 2){
address = args.at(1);
if(args.length() >= 3){
port = args.at(2);
}
}
// use previous value for client, stored earlier
// if(address.isEmpty()){
// QSettings settings("QtDF", "bttennis");
// address = settings.value("lastclient").toString();
// }
// hard-code address and port number if not provided
if(address.isEmpty()){
address = "6C:9B:02:0C:91:D3"; // "J C7-2"
port = QString("20");
}
if(!address.isEmpty()){
qDebug() << "Connecting to" << address << port;
QBluetoothDeviceInfo device = QBluetoothDeviceInfo(QBluetoothAddress(address), "",
QBluetoothDeviceInfo::MiscellaneousDevice);
QBluetoothServiceInfo service;
if (!port.isEmpty()) {
QBluetoothServiceInfo::Sequence protocolDescriptorList;
QBluetoothServiceInfo::Sequence protocol;
protocol << QVariant::fromValue(QBluetoothUuid(QBluetoothUuid::Rfcomm))
<< QVariant::fromValue(port.toUShort());
protocolDescriptorList.append(QVariant::fromValue(protocol));
service.setAttribute(QBluetoothServiceInfo::ProtocolDescriptorList,
protocolDescriptorList);
qDebug() << "port" << port.toUShort() << service.protocolServiceMultiplexer();
}
else {
service.setServiceUuid(QBluetoothUuid(serviceUuid));
}
service.setDevice(device);
// delay so that server is in waiting state
qDebug() << "Starting sleep";
mythread.sleep(10); // seconds
qDebug() << "Finished sleeping";
client.startClient(service);
} else {
qDebug() << "failed because address and/or port is missing " << address << port;
}
return app.exec();
}
void tst_QBluetoothServiceInfo::tst_assignment()
{
QFETCH(QUuid, uuid);
QFETCH(QBluetoothUuid::ProtocolUuid, protocolUuid);
QFETCH(QBluetoothServiceInfo::Protocol, serviceInfoProtocol);
QFETCH(bool, protocolSupported);
const QString serviceName("My Service");
const QBluetoothDeviceInfo deviceInfo(QBluetoothAddress("001122334455"), "Test Device", 0);
QBluetoothServiceInfo serviceInfo;
serviceInfo.setServiceName(serviceName);
serviceInfo.setDevice(deviceInfo);
QVERIFY(serviceInfo.isValid());
QVERIFY(!serviceInfo.isRegistered());
QVERIFY(!serviceInfo.isComplete());
{
QBluetoothServiceInfo copyInfo = serviceInfo;
QVERIFY(copyInfo.isValid());
QVERIFY(!copyInfo.isRegistered());
QVERIFY(!copyInfo.isComplete());
QCOMPARE(copyInfo.serviceName(), serviceName);
QCOMPARE(copyInfo.device().address(), deviceInfo.address());
}
{
QBluetoothServiceInfo copyInfo;
QVERIFY(!copyInfo.isValid());
QVERIFY(!copyInfo.isRegistered());
QVERIFY(!copyInfo.isComplete());
copyInfo = serviceInfo;
QVERIFY(copyInfo.isValid());
QVERIFY(!copyInfo.isRegistered());
QVERIFY(!copyInfo.isComplete());
QCOMPARE(copyInfo.serviceName(), serviceName);
QCOMPARE(copyInfo.device().address(), deviceInfo.address());
}
{
QBluetoothServiceInfo copyInfo1;
QBluetoothServiceInfo copyInfo2;
QVERIFY(!copyInfo1.isValid());
QVERIFY(!copyInfo1.isRegistered());
QVERIFY(!copyInfo1.isComplete());
QVERIFY(!copyInfo2.isValid());
QVERIFY(!copyInfo2.isRegistered());
QVERIFY(!copyInfo2.isComplete());
copyInfo1 = copyInfo2 = serviceInfo;
QVERIFY(copyInfo1.isValid());
QVERIFY(!copyInfo1.isRegistered());
QVERIFY(!copyInfo1.isComplete());
QVERIFY(copyInfo2.isValid());
QVERIFY(!copyInfo2.isRegistered());
QVERIFY(!copyInfo2.isComplete());
QCOMPARE(copyInfo1.serviceName(), serviceName);
QCOMPARE(copyInfo2.serviceName(), serviceName);
QCOMPARE(copyInfo1.device().address(), deviceInfo.address());
QCOMPARE(copyInfo2.device().address(), deviceInfo.address());
}
{
QBluetoothServiceInfo copyInfo;
QVERIFY(!copyInfo.isValid());
QVERIFY(!copyInfo.isRegistered());
QVERIFY(!copyInfo.isComplete());
copyInfo = serviceInfo;
QVERIFY(copyInfo.contains(QBluetoothServiceInfo::ServiceName));
copyInfo.setAttribute(QBluetoothServiceInfo::ProtocolDescriptorList, QBluetoothUuid(uuid));
QVERIFY(copyInfo.contains(QBluetoothServiceInfo::ProtocolDescriptorList));
QVERIFY(copyInfo.isComplete());
QVERIFY(copyInfo.attributes().count() > 0);
copyInfo.removeAttribute(QBluetoothServiceInfo::ProtocolDescriptorList);
QVERIFY(!copyInfo.contains(QBluetoothServiceInfo::ProtocolDescriptorList));
QVERIFY(!copyInfo.isComplete());
}
{
QBluetoothServiceInfo copyInfo;
QVERIFY(!copyInfo.isValid());
copyInfo = serviceInfo;
QVERIFY(copyInfo.serverChannel() == -1);
QVERIFY(copyInfo.protocolServiceMultiplexer() == -1);
QBluetoothServiceInfo::Sequence protocolDescriptorList;
QBluetoothServiceInfo::Sequence protocol;
protocol << QVariant::fromValue(QBluetoothUuid(protocolUuid));
protocolDescriptorList.append(QVariant::fromValue(protocol));
protocol.clear();
protocolDescriptorList.append(QVariant::fromValue(protocol));
copyInfo.setAttribute(QBluetoothServiceInfo::ProtocolDescriptorList,
protocolDescriptorList);
if (serviceInfoProtocol == QBluetoothServiceInfo::L2capProtocol) {
QVERIFY(copyInfo.serverChannel() == -1);
QVERIFY(copyInfo.protocolServiceMultiplexer() != -1);
} else if (serviceInfoProtocol == QBluetoothServiceInfo::RfcommProtocol) {
QVERIFY(copyInfo.serverChannel() != -1);
QVERIFY(copyInfo.protocolServiceMultiplexer() == -1);
}
QVERIFY(copyInfo.socketProtocol() == serviceInfoProtocol);
}
{
QBluetoothServiceInfo copyInfo;
QVERIFY(!copyInfo.isValid());
copyInfo = serviceInfo;
copyInfo.setServiceUuid(QBluetoothUuid::SerialPort);
QVERIFY(!copyInfo.isRegistered());
if (!QBluetoothLocalDevice::allDevices().count()) {
QSKIP("Skipping test due to missing Bluetooth device");
} else if (protocolSupported) {
QBluetoothServer server(serviceInfoProtocol);
QVERIFY(server.listen());
QTRY_VERIFY_WITH_TIMEOUT(server.isListening(), 5000);
QVERIFY(server.serverPort() > 0);
QBluetoothServiceInfo::Sequence protocolDescriptorList;
QBluetoothServiceInfo::Sequence protocol;
protocol << QVariant::fromValue(QBluetoothUuid(QBluetoothUuid::L2cap));
if (serviceInfoProtocol == QBluetoothServiceInfo::L2capProtocol) {
protocol << QVariant::fromValue(server.serverPort());
protocolDescriptorList.append(QVariant::fromValue(protocol));
} else if (serviceInfoProtocol == QBluetoothServiceInfo::RfcommProtocol) {
protocolDescriptorList.append(QVariant::fromValue(protocol));
protocol.clear();
protocol << QVariant::fromValue(QBluetoothUuid(QBluetoothUuid::Rfcomm))
<< QVariant::fromValue(quint8(server.serverPort()));
protocolDescriptorList.append(QVariant::fromValue(protocol));
}
serviceInfo.setAttribute(QBluetoothServiceInfo::ProtocolDescriptorList,
protocolDescriptorList);
QVERIFY(copyInfo.registerService());
QVERIFY(copyInfo.isRegistered());
QVERIFY(serviceInfo.isRegistered());
QBluetoothServiceInfo secondCopy;
secondCopy = copyInfo;
QVERIFY(secondCopy.isRegistered());
QVERIFY(secondCopy.unregisterService());
QVERIFY(!copyInfo.isRegistered());
QVERIFY(!secondCopy.isRegistered());
QVERIFY(!serviceInfo.isRegistered());
QVERIFY(server.isListening());
server.close();
QVERIFY(!server.isListening());
}
}
}
Tennis::Tennis(QWidget *parent)
: QDialog(parent), ui(new Ui_Tennis), board(new Board), controller(new Controller), socket(0),
m_discoveryAgent(new QBluetoothServiceDiscoveryAgent), m_handover(0)
{
// start Bluetooth if not started
QBluetoothLocalDevice *device = new QBluetoothLocalDevice();
device->powerOn();
delete device;
device = 0;
//! [Construct UI]
ui->setupUi(this);
isClient = false;
isConnected = false;
quickDiscovery = true;
#if defined (Q_OS_SYMBIAN) || defined(Q_OS_WINCE) || defined(Q_WS_MAEMO_5) || defined(Q_WS_MAEMO_6)
setWindowState(Qt::WindowMaximized);
#endif
ui->pongView->setScene(board->getScene());
connect(ui->pongView, SIGNAL(mouseMove(int, int)), this, SLOT(mouseMove(int, int)));
ui->pongView->setMouseTracking(false);
connect(board, SIGNAL(ballCollision(Board::Edge)), controller, SLOT(ballCollision(Board::Edge)));
connect(board, SIGNAL(scored(Board::Edge)), controller, SLOT(scored(Board::Edge)));
connect(controller, SIGNAL(moveBall(int,int)), board, SLOT(setBall(int,int)));
connect(this, SIGNAL(moveLeftPaddle(int)), board, SLOT(setLeftPaddle(int)));
connect(this, SIGNAL(moveRightPaddle(int)), board, SLOT(setRightPaddle(int)));
connect(controller, SIGNAL(score(int,int)), board, SLOT(setScore(int,int)));
connect(controller, SIGNAL(fps(const QString&)), this, SLOT(fps(const QString&)));
setFocusPolicy(Qt::WheelFocus);
paddle_pos = (Board::Height-12)/2-Board::Paddle/2;
endPaddlePos = paddle_pos;
emit moveLeftPaddle(paddle_pos);
board->setRightPaddle(paddle_pos);
server = new TennisServer(this);
connect(controller, SIGNAL(moveBall(int,int)), server, SLOT(moveBall(int,int)));
connect(controller, SIGNAL(score(int,int)), server, SLOT(score(int,int)));
connect(this, SIGNAL(moveLeftPaddle(int)), server, SLOT(moveLeftPaddle(int)));
connect(server, SIGNAL(clientConnected(QString)), this, SLOT(serverConnected(QString)));
connect(server, SIGNAL(clientDisconnected(QString)), this, SLOT(serverDisconnected()));
connect(server, SIGNAL(moveRightPaddle(int)), board, SLOT(setRightPaddle(int)));
connect(server, SIGNAL(lag(int)), this, SLOT(lagReport(int)));
connect(server, SIGNAL(clientConnected(QString)), controller, SLOT(refresh()));
server->startServer();
client = new TennisClient(this);
connect(client, SIGNAL(moveBall(int,int)), board, SLOT(setBall(int,int)));
connect(client, SIGNAL(moveLeftPaddle(int)), board, SLOT(setLeftPaddle(int)));
connect(client, SIGNAL(connected(QString)), this, SLOT(clientConnected(QString)));
connect(client, SIGNAL(disconnected()), this, SLOT(clientDisconnected()));
connect(this, SIGNAL(moveRightPaddle(int)), client, SLOT(moveRightPaddle(int)));
connect(client, SIGNAL(score(int,int)), board, SLOT(setScore(int,int)));
connect(client, SIGNAL(lag(int)), this, SLOT(lagReport(int)));
connect(this, SIGNAL(moveLeftPaddle(int)), controller, SLOT(moveLeftPaddle(int)));
connect(this, SIGNAL(moveRightPaddle(int)), controller, SLOT(moveRightPaddle(int)));
connect(server, SIGNAL(moveRightPaddle(int)), controller, SLOT(moveRightPaddle(int)));
// ui->pongView->setBackgroundBrush(QBrush(Qt::white));
ui->pongView->setCacheMode(QGraphicsView::CacheBackground);
QNearFieldManager nearFieldManager;
if (nearFieldManager.isAvailable()) {
m_handover = new Handover(server->serverPort(), this);
connect(m_handover, SIGNAL(bluetoothServiceChanged()), this, SLOT(nearFieldHandover()));
connect(m_discoveryAgent, SIGNAL(serviceDiscovered(QBluetoothServiceInfo)),
this, SLOT(serviceDiscovered(QBluetoothServiceInfo)));
connect(m_discoveryAgent, SIGNAL(finished()), this, SLOT(discoveryFinished()));
}
m_discoveryAgent->setUuidFilter(QBluetoothUuid(serviceUuid));
QString address;
QString port;
QStringList args = QCoreApplication::arguments();
if(args.length() >= 2){
address = args.at(1);
if(args.length() >= 3){
port = args.at(2);
}
}
if(address.isEmpty()){
QSettings settings("QtDF", "bttennis");
address = settings.value("lastclient").toString();
}
if(!address.isEmpty()){
qDebug() << "Connect to" << address << port;
QBluetoothDeviceInfo device = QBluetoothDeviceInfo(QBluetoothAddress(address), "", QBluetoothDeviceInfo::ComputerDevice);
QBluetoothServiceInfo service;
if (!port.isEmpty()) {
QBluetoothServiceInfo::Sequence protocolDescriptorList;
QBluetoothServiceInfo::Sequence protocol;
protocol << QVariant::fromValue(QBluetoothUuid(QBluetoothUuid::L2cap))
<< QVariant::fromValue(port.toUShort());
protocolDescriptorList.append(QVariant::fromValue(protocol));
service.setAttribute(QBluetoothServiceInfo::ProtocolDescriptorList,
protocolDescriptorList);
qDebug() << "port" << port.toUShort() << service.protocolServiceMultiplexer();
}
else {
service.setServiceUuid(QBluetoothUuid(serviceUuid));
}
service.setDevice(device);
client->startClient(service);
board->setStatus("Connecting", 100, 25);
} else if (nearFieldManager.isAvailable()) {
board->setStatus(tr("Touch to play"), 100, 25);
}
setEnabled(true);
paddleAnimation = new QPropertyAnimation(this, "paddlePos", this);
paddleAnimation->setEasingCurve(QEasingCurve::InOutQuad);
ui->pongView->installEventFilter(this);
}