void QgsZonalStatistics::statisticsFromPreciseIntersection( void* band, const QgsGeometry* poly, int pixelOffsetX,
int pixelOffsetY, int nCellsX, int nCellsY, double cellSizeX, double cellSizeY, const QgsRectangle& rasterBBox, FeatureStats &stats )
{
stats.reset();
double currentY = rasterBBox.yMaximum() - pixelOffsetY * cellSizeY - cellSizeY / 2;
float* pixelData = ( float * ) CPLMalloc( sizeof( float ) );
QgsGeometry* pixelRectGeometry = nullptr;
double hCellSizeX = cellSizeX / 2.0;
double hCellSizeY = cellSizeY / 2.0;
double pixelArea = cellSizeX * cellSizeY;
double weight = 0;
for ( int row = 0; row < nCellsY; ++row )
{
double currentX = rasterBBox.xMinimum() + cellSizeX / 2.0 + pixelOffsetX * cellSizeX;
for ( int col = 0; col < nCellsX; ++col )
{
if ( GDALRasterIO( band, GF_Read, pixelOffsetX + col, pixelOffsetY + row, nCellsX, 1, pixelData, 1, 1, GDT_Float32, 0, 0 ) != CE_None )
QgsDebugMsg( "Raster IO Error" );
if ( !validPixel( *pixelData ) )
continue;
pixelRectGeometry = QgsGeometry::fromRect( QgsRectangle( currentX - hCellSizeX, currentY - hCellSizeY, currentX + hCellSizeX, currentY + hCellSizeY ) );
if ( pixelRectGeometry )
{
//intersection
QgsGeometry *intersectGeometry = pixelRectGeometry->intersection( poly );
if ( intersectGeometry )
{
double intersectionArea = intersectGeometry->area();
if ( intersectionArea >= 0.0 )
{
weight = intersectionArea / pixelArea;
stats.addValue( *pixelData, weight );
}
delete intersectGeometry;
}
delete pixelRectGeometry;
pixelRectGeometry = nullptr;
}
currentX += cellSizeX;
}
currentY -= cellSizeY;
}
CPLFree( pixelData );
}
void QgsZonalStatistics::statisticsFromPreciseIntersection( const QgsGeometry &poly, int pixelOffsetX,
int pixelOffsetY, int nCellsX, int nCellsY, double cellSizeX, double cellSizeY, const QgsRectangle &rasterBBox, FeatureStats &stats )
{
stats.reset();
double currentY = rasterBBox.yMaximum() - pixelOffsetY * cellSizeY - cellSizeY / 2;
QgsGeometry pixelRectGeometry;
double hCellSizeX = cellSizeX / 2.0;
double hCellSizeY = cellSizeY / 2.0;
double pixelArea = cellSizeX * cellSizeY;
double weight = 0;
QgsRectangle featureBBox = poly.boundingBox().intersect( &rasterBBox );
QgsRectangle intersectBBox = rasterBBox.intersect( &featureBBox );
QgsRasterBlock *block = mRasterProvider->block( mRasterBand, intersectBBox, nCellsX, nCellsY );
for ( int i = 0; i < nCellsY; ++i )
{
double currentX = rasterBBox.xMinimum() + cellSizeX / 2.0 + pixelOffsetX * cellSizeX;
for ( int j = 0; j < nCellsX; ++j )
{
if ( !validPixel( block->value( i, j ) ) )
{
continue;
}
pixelRectGeometry = QgsGeometry::fromRect( QgsRectangle( currentX - hCellSizeX, currentY - hCellSizeY, currentX + hCellSizeX, currentY + hCellSizeY ) );
if ( !pixelRectGeometry.isNull() )
{
//intersection
QgsGeometry intersectGeometry = pixelRectGeometry.intersection( poly );
if ( !intersectGeometry.isNull() )
{
double intersectionArea = intersectGeometry.area();
if ( intersectionArea >= 0.0 )
{
weight = intersectionArea / pixelArea;
stats.addValue( block->value( i, j ), weight );
}
}
pixelRectGeometry = QgsGeometry();
}
currentX += cellSizeX;
}
currentY -= cellSizeY;
}
delete block;
}
void QgsZonalStatistics::statisticsFromPreciseIntersection( void* band, QgsGeometry* poly, int pixelOffsetX,
int pixelOffsetY, int nCellsX, int nCellsY, double cellSizeX, double cellSizeY, const QgsRectangle& rasterBBox, double& sum, double& count )
{
sum = 0;
count = 0;
double currentY = rasterBBox.yMaximum() - pixelOffsetY * cellSizeY - cellSizeY / 2;
float* pixelData = ( float * ) CPLMalloc( sizeof( float ) );
QgsGeometry* pixelRectGeometry = 0;
double hCellSizeX = cellSizeX / 2.0;
double hCellSizeY = cellSizeY / 2.0;
double pixelArea = cellSizeX * cellSizeY;
double weight = 0;
for ( int row = 0; row < nCellsY; ++row )
{
double currentX = rasterBBox.xMinimum() + cellSizeX / 2.0 + pixelOffsetX * cellSizeX;
for ( int col = 0; col < nCellsX; ++col )
{
GDALRasterIO( band, GF_Read, pixelOffsetX + col, pixelOffsetY + row, nCellsX, 1, pixelData, 1, 1, GDT_Float32, 0, 0 );
pixelRectGeometry = QgsGeometry::fromRect( QgsRectangle( currentX - hCellSizeX, currentY - hCellSizeY, currentX + hCellSizeX, currentY + hCellSizeY ) );
if ( pixelRectGeometry )
{
//intersection
QgsGeometry *intersectGeometry = pixelRectGeometry->intersection( poly );
if ( intersectGeometry )
{
double intersectionArea = intersectGeometry->area();
if ( intersectionArea >= 0.0 )
{
weight = intersectionArea / pixelArea;
count += weight;
sum += *pixelData * weight;
}
delete intersectGeometry;
}
delete pixelRectGeometry;
pixelRectGeometry = 0;
}
currentX += cellSizeX;
}
currentY -= cellSizeY;
}
CPLFree( pixelData );
}
void QgsOverlayAnalyzer::intersectFeature( QgsFeature& f, QgsVectorFileWriter* vfw,
QgsVectorLayer* vl, QgsSpatialIndex* index )
{
if ( !f.hasGeometry() )
{
return;
}
QgsGeometry featureGeometry = f.geometry();
QgsGeometry intersectGeometry;
QgsFeature overlayFeature;
QList<QgsFeatureId> intersects;
intersects = index->intersects( featureGeometry.boundingBox() );
QList<QgsFeatureId>::const_iterator it = intersects.constBegin();
QgsFeature outFeature;
for ( ; it != intersects.constEnd(); ++it )
{
if ( !vl->getFeatures( QgsFeatureRequest().setFilterFid( *it ) ).nextFeature( overlayFeature ) )
{
continue;
}
if ( featureGeometry.intersects( overlayFeature.geometry() ) )
{
intersectGeometry = featureGeometry.intersection( overlayFeature.geometry() );
outFeature.setGeometry( intersectGeometry );
QgsAttributes attributesA = f.attributes();
QgsAttributes attributesB = overlayFeature.attributes();
combineAttributeMaps( attributesA, attributesB );
outFeature.setAttributes( attributesA );
//add it to vector file writer
if ( vfw )
{
vfw->addFeature( outFeature );
}
}
}
}
void QgsOverlayAnalyzer::intersectFeature( QgsFeature& f, QgsVectorFileWriter* vfw,
QgsVectorLayer* vl, QgsSpatialIndex* index )
{
QgsGeometry* featureGeometry = f.geometry();
QgsGeometry* intersectGeometry = 0;
QgsFeature overlayFeature;
if ( !featureGeometry )
{
return;
}
QList<int> intersects;
intersects = index->intersects( featureGeometry->boundingBox() );
QList<int>::const_iterator it = intersects.constBegin();
QgsFeature outFeature;
for ( ; it != intersects.constEnd(); ++it )
{
if ( !vl->featureAtId( *it, overlayFeature, true, true ) )
{
continue;
}
if ( featureGeometry->intersects( overlayFeature.geometry() ) )
{
intersectGeometry = featureGeometry->intersection( overlayFeature.geometry() );
outFeature.setGeometry( intersectGeometry );
QgsAttributeMap attributeMapA = f.attributeMap();
QgsAttributeMap attributeMapB = overlayFeature.attributeMap();
combineAttributeMaps( attributeMapA, attributeMapB );
outFeature.setAttributeMap( attributeMapA );
//add it to vector file writer
if ( vfw )
{
vfw->addFeature( outFeature );
}
}
}
}
void QgsOverlayAnalyzer::intersectFeature( QgsFeature &f, QgsVectorFileWriter *vfw,
QgsVectorLayer *vl, QgsSpatialIndex *index )
{
if ( !f.hasGeometry() )
{
return;
}
QgsGeometry featureGeometry = f.geometry();
QgsGeometry intersectGeometry;
QgsFeature overlayFeature;
QList<QgsFeatureId> intersects = index->intersects( featureGeometry.boundingBox() );
QgsFeatureRequest req = QgsFeatureRequest().setFilterFids( intersects.toSet() );
QgsFeatureIterator intersectIt = vl->getFeatures( req );
QgsFeature outFeature;
while ( intersectIt.nextFeature( overlayFeature ) )
{
if ( featureGeometry.intersects( overlayFeature.geometry() ) )
{
intersectGeometry = featureGeometry.intersection( overlayFeature.geometry() );
outFeature.setGeometry( intersectGeometry );
QgsAttributes attributesA = f.attributes();
QgsAttributes attributesB = overlayFeature.attributes();
combineAttributeMaps( attributesA, attributesB );
outFeature.setAttributes( attributesA );
//add it to vector file writer
if ( vfw )
{
vfw->addFeature( outFeature );
}
}
}
}
int QgsMapCanvasSnapper::snapToBackgroundLayers( const QgsPoint& point, QList<QgsSnappingResult>& results, const QList<QgsPoint>& excludePoints )
{
results.clear();
if ( !mSnapper )
return 5;
//topological editing on?
int topologicalEditing = QgsProject::instance()->readNumEntry( "Digitizing", "/TopologicalEditing", 0 );
//snapping on intersection on?
int intersectionSnapping = QgsProject::instance()->readNumEntry( "Digitizing", "/IntersectionSnapping", 0 );
if ( topologicalEditing == 0 )
{
if ( intersectionSnapping == 0 )
mSnapper->setSnapMode( QgsSnapper::SnapWithOneResult );
else
mSnapper->setSnapMode( QgsSnapper::SnapWithResultsWithinTolerances );
}
else if ( intersectionSnapping == 0 )
{
mSnapper->setSnapMode( QgsSnapper::SnapWithResultsForSamePosition );
}
else
{
mSnapper->setSnapMode( QgsSnapper::SnapWithResultsWithinTolerances );
}
//read snapping settings from project
bool snappingDefinedInProject, ok;
QStringList layerIdList = QgsProject::instance()->readListEntry( "Digitizing", "/LayerSnappingList", QStringList(), &snappingDefinedInProject );
QStringList enabledList = QgsProject::instance()->readListEntry( "Digitizing", "/LayerSnappingEnabledList", QStringList(), &ok );
QStringList toleranceList = QgsProject::instance()->readListEntry( "Digitizing", "/LayerSnappingToleranceList", QStringList(), &ok );
QStringList toleranceUnitList = QgsProject::instance()->readListEntry( "Digitizing", "/LayerSnappingToleranceUnitList", QStringList(), &ok );
QStringList snapToList = QgsProject::instance()->readListEntry( "Digitizing", "/LayerSnapToList", QStringList(), &ok );
if ( !( layerIdList.size() == enabledList.size() &&
layerIdList.size() == toleranceList.size() &&
layerIdList.size() == toleranceUnitList.size() &&
layerIdList.size() == snapToList.size() ) )
{
// lists must have the same size, otherwise something is wrong
return 1;
}
QList<QgsSnapper::SnapLayer> snapLayers;
QgsSnapper::SnapLayer snapLayer;
// Use snapping information from the project
if ( snappingDefinedInProject )
{
// set layers, tolerances, snap to segment/vertex to QgsSnapper
QStringList::const_iterator layerIt( layerIdList.constBegin() );
QStringList::const_iterator tolIt( toleranceList.constBegin() );
QStringList::const_iterator tolUnitIt( toleranceUnitList.constBegin() );
QStringList::const_iterator snapIt( snapToList.constBegin() );
QStringList::const_iterator enabledIt( enabledList.constBegin() );
for ( ; layerIt != layerIdList.constEnd(); ++layerIt, ++tolIt, ++tolUnitIt, ++snapIt, ++enabledIt )
{
if ( *enabledIt != "enabled" )
{
// skip layer if snapping is not enabled
continue;
}
//layer
QgsVectorLayer *vlayer = qobject_cast<QgsVectorLayer *>( QgsMapLayerRegistry::instance()->mapLayer( *layerIt ) );
if ( !vlayer || !vlayer->hasGeometryType() )
continue;
snapLayer.mLayer = vlayer;
//tolerance
snapLayer.mTolerance = tolIt->toDouble();
snapLayer.mUnitType = ( QgsTolerance::UnitType ) tolUnitIt->toInt();
// segment or vertex
if ( *snapIt == "to_vertex" )
{
snapLayer.mSnapTo = QgsSnapper::SnapToVertex;
}
else if ( *snapIt == "to_segment" )
{
snapLayer.mSnapTo = QgsSnapper::SnapToSegment;
}
else
{
// to vertex and segment
snapLayer.mSnapTo = QgsSnapper::SnapToVertexAndSegment;
}
snapLayers.append( snapLayer );
}
}
else
{
// nothing in project. Use default snapping tolerance to vertex of current layer
QgsMapLayer* currentLayer = mMapCanvas->currentLayer();
if ( !currentLayer )
return 2;
QgsVectorLayer* currentVectorLayer = qobject_cast<QgsVectorLayer *>( currentLayer );
if ( !currentVectorLayer )
return 3;
snapLayer.mLayer = currentVectorLayer;
//default snap mode
QSettings settings;
QString defaultSnapString = settings.value( "/qgis/digitizing/default_snap_mode", "off" ).toString();
if ( defaultSnapString == "to segment" )
{
snapLayer.mSnapTo = QgsSnapper::SnapToSegment;
}
else if ( defaultSnapString == "to vertex and segment" )
{
snapLayer.mSnapTo = QgsSnapper::SnapToVertexAndSegment;
}
else if ( defaultSnapString == "to vertex" )
{
snapLayer.mSnapTo = QgsSnapper::SnapToVertex;
}
else
{
return 0;
}
//default snapping tolerance (returned in map units)
snapLayer.mTolerance = QgsTolerance::defaultTolerance( currentVectorLayer, mMapCanvas->mapSettings() );
snapLayer.mUnitType = QgsTolerance::LayerUnits;
snapLayers.append( snapLayer );
}
mSnapper->setSnapLayers( snapLayers );
if ( mSnapper->snapMapPoint( point, results, excludePoints ) != 0 )
return 4;
if ( intersectionSnapping != 1 )
return 0;
QList<QgsSnappingResult> segments;
QList<QgsSnappingResult> points;
for ( QList<QgsSnappingResult>::const_iterator it = results.constBegin();
it != results.constEnd();
++it )
{
if ( it->snappedVertexNr == -1 )
{
QgsDebugMsg( "segment" );
segments.push_back( *it );
}
else
{
QgsDebugMsg( "no segment" );
points.push_back( *it );
}
}
if ( segments.length() < 2 )
return 0;
QList<QgsSnappingResult> myResults;
for ( QList<QgsSnappingResult>::const_iterator oSegIt = segments.constBegin();
oSegIt != segments.constEnd();
++oSegIt )
{
QgsDebugMsg( QString::number( oSegIt->beforeVertexNr ) );
QVector<QgsPoint> vertexPoints;
vertexPoints.append( oSegIt->beforeVertex );
vertexPoints.append( oSegIt->afterVertex );
QgsGeometry* lineA = QgsGeometry::fromPolyline( vertexPoints );
for ( QList<QgsSnappingResult>::iterator iSegIt = segments.begin();
iSegIt != segments.end();
++iSegIt )
{
QVector<QgsPoint> vertexPoints;
vertexPoints.append( iSegIt->beforeVertex );
vertexPoints.append( iSegIt->afterVertex );
QgsGeometry* lineB = QgsGeometry::fromPolyline( vertexPoints );
QgsGeometry* intersectionPoint = lineA->intersection( lineB );
delete lineB;
if ( intersectionPoint && intersectionPoint->type() == QGis::Point )
{
//We have to check the intersection point is inside the tolerance distance for both layers
double toleranceA = 0;
double toleranceB = 0;
for ( int i = 0 ;i < snapLayers.size();++i )
{
if ( snapLayers[i].mLayer == oSegIt->layer )
{
toleranceA = QgsTolerance::toleranceInMapUnits( snapLayers[i].mTolerance, snapLayers[i].mLayer, mMapCanvas->mapSettings(), snapLayers[i].mUnitType );
}
if ( snapLayers[i].mLayer == iSegIt->layer )
{
toleranceB = QgsTolerance::toleranceInMapUnits( snapLayers[i].mTolerance, snapLayers[i].mLayer, mMapCanvas->mapSettings(), snapLayers[i].mUnitType );
}
}
QgsGeometry* cursorPoint = QgsGeometry::fromPoint( point );
double distance = intersectionPoint->distance( *cursorPoint );
if ( distance < toleranceA && distance < toleranceB )
{
iSegIt->snappedVertex = intersectionPoint->asPoint();
myResults.append( *iSegIt );
}
delete cursorPoint;
}
delete intersectionPoint;
}
delete lineA;
}
if ( myResults.length() > 0 )
{
results.clear();
results = myResults;
}
return 0;
}
QVariantMap QgsLineIntersectionAlgorithm::processAlgorithm( const QVariantMap ¶meters, QgsProcessingContext &context, QgsProcessingFeedback *feedback )
{
std::unique_ptr< QgsFeatureSource > sourceA( parameterAsSource( parameters, QStringLiteral( "INPUT" ), context ) );
if ( !sourceA )
throw QgsProcessingException( invalidSourceError( parameters, QStringLiteral( "INPUT" ) ) );
std::unique_ptr< QgsFeatureSource > sourceB( parameterAsSource( parameters, QStringLiteral( "INTERSECT" ), context ) );
if ( !sourceB )
throw QgsProcessingException( invalidSourceError( parameters, QStringLiteral( "INTERSECT" ) ) );
const QStringList fieldsA = parameterAsFields( parameters, QStringLiteral( "INPUT_FIELDS" ), context );
const QStringList fieldsB = parameterAsFields( parameters, QStringLiteral( "INTERSECT_FIELDS" ), context );
QgsAttributeList fieldIndicesA = QgsProcessingUtils::fieldNamesToIndices( fieldsA, sourceA->fields() );
QgsAttributeList fieldIndicesB = QgsProcessingUtils::fieldNamesToIndices( fieldsB, sourceB->fields() );
QString intersectFieldsPrefix = parameterAsString( parameters, QStringLiteral( "INTERSECT_FIELDS_PREFIX" ), context );
QgsFields outFields = QgsProcessingUtils::combineFields(
QgsProcessingUtils::indicesToFields( fieldIndicesA, sourceA->fields() ),
QgsProcessingUtils::indicesToFields( fieldIndicesB, sourceB->fields() ),
intersectFieldsPrefix );
QString dest;
std::unique_ptr< QgsFeatureSink > sink( parameterAsSink( parameters, QStringLiteral( "OUTPUT" ), context, dest, outFields, QgsWkbTypes::Point, sourceA->sourceCrs(), QgsFeatureSink::RegeneratePrimaryKey ) );
if ( !sink )
throw QgsProcessingException( invalidSinkError( parameters, QStringLiteral( "OUTPUT" ) ) );
QgsSpatialIndex spatialIndex( sourceB->getFeatures( QgsFeatureRequest().setNoAttributes().setDestinationCrs( sourceA->sourceCrs(), context.transformContext() ) ), feedback );
QgsFeature outFeature;
QgsFeatureIterator features = sourceA->getFeatures( QgsFeatureRequest().setSubsetOfAttributes( fieldIndicesA ) );
double step = sourceA->featureCount() > 0 ? 100.0 / sourceA->featureCount() : 1;
int i = 0;
QgsFeature inFeatureA;
while ( features.nextFeature( inFeatureA ) )
{
i++;
if ( feedback->isCanceled() )
{
break;
}
if ( !inFeatureA.hasGeometry() )
continue;
QgsGeometry inGeom = inFeatureA.geometry();
QgsFeatureIds lines = spatialIndex.intersects( inGeom.boundingBox() ).toSet();
if ( !lines.empty() )
{
// use prepared geometries for faster intersection tests
std::unique_ptr< QgsGeometryEngine > engine( QgsGeometry::createGeometryEngine( inGeom.constGet() ) );
engine->prepareGeometry();
QgsFeatureRequest request = QgsFeatureRequest().setFilterFids( lines );
request.setDestinationCrs( sourceA->sourceCrs(), context.transformContext() );
request.setSubsetOfAttributes( fieldIndicesB );
QgsFeature inFeatureB;
QgsFeatureIterator featuresB = sourceB->getFeatures( request );
while ( featuresB.nextFeature( inFeatureB ) )
{
if ( feedback->isCanceled() )
{
break;
}
QgsGeometry tmpGeom = inFeatureB.geometry();
if ( engine->intersects( tmpGeom.constGet() ) )
{
QgsMultiPointXY points;
QgsGeometry intersectGeom = inGeom.intersection( tmpGeom );
QgsAttributes outAttributes;
for ( int a : qgis::as_const( fieldIndicesA ) )
{
outAttributes.append( inFeatureA.attribute( a ) );
}
for ( int b : qgis::as_const( fieldIndicesB ) )
{
outAttributes.append( inFeatureB.attribute( b ) );
}
if ( QgsWkbTypes::flatType( intersectGeom.wkbType() ) == QgsWkbTypes::GeometryCollection )
{
const QVector<QgsGeometry> geomCollection = intersectGeom.asGeometryCollection();
for ( const QgsGeometry &part : geomCollection )
{
if ( part.type() == QgsWkbTypes::PointGeometry )
{
if ( part.isMultipart() )
{
points = part.asMultiPoint();
}
else
{
points.append( part.asPoint() );
}
}
}
}
else if ( intersectGeom.type() == QgsWkbTypes::PointGeometry )
{
if ( intersectGeom.isMultipart() )
{
points = intersectGeom.asMultiPoint();
}
else
{
points.append( intersectGeom.asPoint() );
}
}
for ( const QgsPointXY &j : qgis::as_const( points ) )
{
outFeature.setGeometry( QgsGeometry::fromPointXY( j ) );
outFeature.setAttributes( outAttributes );
sink->addFeature( outFeature, QgsFeatureSink::FastInsert );
}
}
}
}
feedback->setProgress( i * step );
}
QVariantMap outputs;
outputs.insert( QStringLiteral( "OUTPUT" ), dest );
return outputs;
}
int QgsTransectSample::createSample( QProgressDialog* pd )
{
Q_UNUSED( pd );
if ( !mStrataLayer || !mStrataLayer->isValid() )
{
return 1;
}
if ( !mBaselineLayer || !mBaselineLayer->isValid() )
{
return 2;
}
//stratum id is not necessarily an integer
QVariant::Type stratumIdType = QVariant::Int;
if ( !mStrataIdAttribute.isEmpty() )
{
stratumIdType = mStrataLayer->pendingFields().field( mStrataIdAttribute ).type();
}
//create vector file writers for output
QgsFields outputPointFields;
outputPointFields.append( QgsField( "id", stratumIdType ) );
outputPointFields.append( QgsField( "station_id", QVariant::Int ) );
outputPointFields.append( QgsField( "stratum_id", stratumIdType ) );
outputPointFields.append( QgsField( "station_code", QVariant::String ) );
outputPointFields.append( QgsField( "start_lat", QVariant::Double ) );
outputPointFields.append( QgsField( "start_long", QVariant::Double ) );
QgsVectorFileWriter outputPointWriter( mOutputPointLayer, "utf-8", outputPointFields, QGis::WKBPoint,
&( mStrataLayer->crs() ) );
if ( outputPointWriter.hasError() != QgsVectorFileWriter::NoError )
{
return 3;
}
outputPointFields.append( QgsField( "bearing", QVariant::Double ) ); //add bearing attribute for lines
QgsVectorFileWriter outputLineWriter( mOutputLineLayer, "utf-8", outputPointFields, QGis::WKBLineString,
&( mStrataLayer->crs() ) );
if ( outputLineWriter.hasError() != QgsVectorFileWriter::NoError )
{
return 4;
}
QgsFields usedBaselineFields;
usedBaselineFields.append( QgsField( "stratum_id", stratumIdType ) );
usedBaselineFields.append( QgsField( "ok", QVariant::String ) );
QgsVectorFileWriter usedBaselineWriter( mUsedBaselineLayer, "utf-8", usedBaselineFields, QGis::WKBLineString,
&( mStrataLayer->crs() ) );
if ( usedBaselineWriter.hasError() != QgsVectorFileWriter::NoError )
{
return 5;
}
//debug: write clipped buffer bounds with stratum id to same directory as out_point
QFileInfo outputPointInfo( mOutputPointLayer );
QString bufferClipLineOutput = outputPointInfo.absolutePath() + "/out_buffer_clip_line.shp";
QgsFields bufferClipLineFields;
bufferClipLineFields.append( QgsField( "id", stratumIdType ) );
QgsVectorFileWriter bufferClipLineWriter( bufferClipLineOutput, "utf-8", bufferClipLineFields, QGis::WKBLineString, &( mStrataLayer->crs() ) );
//configure distanceArea depending on minDistance units and output CRS
QgsDistanceArea distanceArea;
distanceArea.setSourceCrs( mStrataLayer->crs().srsid() );
if ( mMinDistanceUnits == Meters )
{
distanceArea.setEllipsoidalMode( true );
}
else
{
distanceArea.setEllipsoidalMode( false );
}
//possibility to transform output points to lat/long
QgsCoordinateTransform toLatLongTransform( mStrataLayer->crs(), QgsCoordinateReferenceSystem( 4326, QgsCoordinateReferenceSystem::EpsgCrsId ) );
//init random number generator
mt_srand( QTime::currentTime().msec() );
QgsFeatureRequest fr;
fr.setSubsetOfAttributes( QStringList() << mStrataIdAttribute << mMinDistanceAttribute << mNPointsAttribute, mStrataLayer->pendingFields() );
QgsFeatureIterator strataIt = mStrataLayer->getFeatures( fr );
QgsFeature fet;
int nTotalTransects = 0;
int nFeatures = 0;
if ( pd )
{
pd->setMaximum( mStrataLayer->featureCount() );
}
while ( strataIt.nextFeature( fet ) )
{
if ( pd )
{
pd->setValue( nFeatures );
}
if ( pd && pd->wasCanceled() )
{
break;
}
if ( !fet.constGeometry() )
{
continue;
}
const QgsGeometry* strataGeom = fet.constGeometry();
//find baseline for strata
QVariant strataId = fet.attribute( mStrataIdAttribute );
QgsGeometry* baselineGeom = findBaselineGeometry( strataId.isValid() ? strataId : -1 );
if ( !baselineGeom )
{
continue;
}
double minDistance = fet.attribute( mMinDistanceAttribute ).toDouble();
double minDistanceLayerUnits = minDistance;
//if minDistance is in meters and the data in degrees, we need to apply a rough conversion for the buffer distance
double bufferDist = bufferDistance( minDistance );
if ( mMinDistanceUnits == Meters && mStrataLayer->crs().mapUnits() == QGis::DecimalDegrees )
{
minDistanceLayerUnits = minDistance / 111319.9;
}
QgsGeometry* clippedBaseline = strataGeom->intersection( baselineGeom );
if ( !clippedBaseline || clippedBaseline->wkbType() == QGis::WKBUnknown )
{
delete clippedBaseline;
continue;
}
QgsGeometry* bufferLineClipped = clipBufferLine( strataGeom, clippedBaseline, bufferDist );
if ( !bufferLineClipped )
{
delete clippedBaseline;
continue;
}
//save clipped baseline to file
QgsFeature blFeature;
blFeature.setGeometry( *clippedBaseline );
blFeature.setAttribute( "stratum_id", strataId );
blFeature.setAttribute( "ok", "f" );
usedBaselineWriter.addFeature( blFeature );
//start loop to create random points along the baseline
int nTransects = fet.attribute( mNPointsAttribute ).toInt();
int nCreatedTransects = 0;
int nIterations = 0;
int nMaxIterations = nTransects * 50;
QgsSpatialIndex sIndex; //to check minimum distance
QMap< QgsFeatureId, QgsGeometry* > lineFeatureMap;
while ( nCreatedTransects < nTransects && nIterations < nMaxIterations )
{
double randomPosition = (( double )mt_rand() / MD_RAND_MAX ) * clippedBaseline->length();
QgsGeometry* samplePoint = clippedBaseline->interpolate( randomPosition );
++nIterations;
if ( !samplePoint )
{
continue;
}
QgsPoint sampleQgsPoint = samplePoint->asPoint();
QgsPoint latLongSamplePoint = toLatLongTransform.transform( sampleQgsPoint );
QgsFeature samplePointFeature;
samplePointFeature.setGeometry( samplePoint );
samplePointFeature.setAttribute( "id", nTotalTransects + 1 );
samplePointFeature.setAttribute( "station_id", nCreatedTransects + 1 );
samplePointFeature.setAttribute( "stratum_id", strataId );
samplePointFeature.setAttribute( "station_code", strataId.toString() + "_" + QString::number( nCreatedTransects + 1 ) );
samplePointFeature.setAttribute( "start_lat", latLongSamplePoint.y() );
samplePointFeature.setAttribute( "start_long", latLongSamplePoint.x() );
//find closest point on clipped buffer line
QgsPoint minDistPoint;
int afterVertex;
if ( bufferLineClipped->closestSegmentWithContext( sampleQgsPoint, minDistPoint, afterVertex ) < 0 )
{
continue;
}
//bearing between sample point and min dist point (transect direction)
double bearing = distanceArea.bearing( sampleQgsPoint, minDistPoint ) / M_PI * 180.0;
QgsPolyline sampleLinePolyline;
QgsPoint ptFarAway( sampleQgsPoint.x() + ( minDistPoint.x() - sampleQgsPoint.x() ) * 1000000,
sampleQgsPoint.y() + ( minDistPoint.y() - sampleQgsPoint.y() ) * 1000000 );
QgsPolyline lineFarAway;
lineFarAway << sampleQgsPoint << ptFarAway;
QgsGeometry* lineFarAwayGeom = QgsGeometry::fromPolyline( lineFarAway );
QgsGeometry* lineClipStratum = lineFarAwayGeom->intersection( strataGeom );
if ( !lineClipStratum )
{
delete lineFarAwayGeom; delete lineClipStratum;
continue;
}
//cancel if distance between sample point and line is too large (line does not start at point
if ( lineClipStratum->distance( *samplePoint ) > 0.000001 )
{
delete lineFarAwayGeom; delete lineClipStratum;
continue;
}
//if lineClipStratum is a multiline, take the part line closest to sampleQgsPoint
if ( lineClipStratum->wkbType() == QGis::WKBMultiLineString
|| lineClipStratum->wkbType() == QGis::WKBMultiLineString25D )
{
QgsGeometry* singleLine = closestMultilineElement( sampleQgsPoint, lineClipStratum );
if ( singleLine )
{
delete lineClipStratum;
lineClipStratum = singleLine;
}
}
//cancel if length of lineClipStratum is too small
double transectLength = distanceArea.measure( lineClipStratum );
if ( transectLength < mMinTransectLength )
{
delete lineFarAwayGeom; delete lineClipStratum;
continue;
}
//search closest existing profile. Cancel if dist < minDist
if ( otherTransectWithinDistance( lineClipStratum, minDistanceLayerUnits, minDistance, sIndex, lineFeatureMap, distanceArea ) )
{
delete lineFarAwayGeom; delete lineClipStratum;
continue;
}
QgsFeatureId fid( nCreatedTransects );
QgsFeature sampleLineFeature( fid );
sampleLineFeature.setGeometry( lineClipStratum );
sampleLineFeature.setAttribute( "id", nTotalTransects + 1 );
sampleLineFeature.setAttribute( "station_id", nCreatedTransects + 1 );
sampleLineFeature.setAttribute( "stratum_id", strataId );
sampleLineFeature.setAttribute( "station_code", strataId.toString() + "_" + QString::number( nCreatedTransects + 1 ) );
sampleLineFeature.setAttribute( "start_lat", latLongSamplePoint.y() );
sampleLineFeature.setAttribute( "start_long", latLongSamplePoint.x() );
sampleLineFeature.setAttribute( "bearing", bearing );
outputLineWriter.addFeature( sampleLineFeature );
//add point to file writer here.
//It can only be written if the corresponding transect has been as well
outputPointWriter.addFeature( samplePointFeature );
sIndex.insertFeature( sampleLineFeature );
Q_NOWARN_DEPRECATED_PUSH
lineFeatureMap.insert( fid, sampleLineFeature.geometryAndOwnership() );
Q_NOWARN_DEPRECATED_POP
delete lineFarAwayGeom;
++nTotalTransects;
++nCreatedTransects;
}
delete clippedBaseline;
QgsFeature bufferClipFeature;
bufferClipFeature.setGeometry( bufferLineClipped );
bufferClipFeature.setAttribute( "id", strataId );
bufferClipLineWriter.addFeature( bufferClipFeature );
//delete bufferLineClipped;
//delete all line geometries in spatial index
QMap< QgsFeatureId, QgsGeometry* >::iterator featureMapIt = lineFeatureMap.begin();
for ( ; featureMapIt != lineFeatureMap.end(); ++featureMapIt )
{
delete( featureMapIt.value() );
}
lineFeatureMap.clear();
delete baselineGeom;
++nFeatures;
}
if ( pd )
{
pd->setValue( mStrataLayer->featureCount() );
}
return 0;
}
QgsGeometry* QgsTransectSample::clipBufferLine( QgsGeometry* stratumGeom, QgsGeometry* clippedBaseline, double tolerance )
{
if ( !stratumGeom || !clippedBaseline || clippedBaseline->wkbType() == QGis::WKBUnknown )
{
return 0;
}
double currentBufferDist = tolerance;
int maxLoops = 10;
for ( int i = 0; i < maxLoops; ++i )
{
//loop with tolerance: create buffer, convert buffer to line, clip line by stratum, test if result is (single) line
QgsGeometry* clipBaselineBuffer = clippedBaseline->buffer( currentBufferDist, 8 );
if ( !clipBaselineBuffer )
{
delete clipBaselineBuffer;
continue;
}
//it is also possible that clipBaselineBuffer is a multipolygon
QgsGeometry* bufferLine = 0; //buffer line or multiline
QgsGeometry* bufferLineClipped = 0;
QgsMultiPolyline mpl;
if ( clipBaselineBuffer->isMultipart() )
{
QgsMultiPolygon bufferMultiPolygon = clipBaselineBuffer->asMultiPolygon();
if ( bufferMultiPolygon.size() < 1 )
{
delete clipBaselineBuffer;
continue;
}
for ( int j = 0; j < bufferMultiPolygon.size(); ++j )
{
int size = bufferMultiPolygon.at( j ).size();
for ( int k = 0; k < size; ++k )
{
mpl.append( bufferMultiPolygon.at( j ).at( k ) );
}
}
bufferLine = QgsGeometry::fromMultiPolyline( mpl );
}
else
{
QgsPolygon bufferPolygon = clipBaselineBuffer->asPolygon();
if ( bufferPolygon.size() < 1 )
{
delete clipBaselineBuffer;
continue;
}
int size = bufferPolygon.size();
for ( int j = 0; j < size; ++j )
{
mpl.append( bufferPolygon[j] );
}
bufferLine = QgsGeometry::fromMultiPolyline( mpl );
}
bufferLineClipped = bufferLine->intersection( stratumGeom );
if ( bufferLineClipped && bufferLineClipped->type() == QGis::Line )
{
//if stratumGeom is a multipolygon, bufferLineClipped must intersect each part
bool bufferLineClippedIntersectsStratum = true;
if ( stratumGeom->wkbType() == QGis::WKBMultiPolygon || stratumGeom->wkbType() == QGis::WKBMultiPolygon25D )
{
QVector<QgsPolygon> multiPoly = stratumGeom->asMultiPolygon();
QVector<QgsPolygon>::const_iterator multiIt = multiPoly.constBegin();
for ( ; multiIt != multiPoly.constEnd(); ++multiIt )
{
QgsGeometry* poly = QgsGeometry::fromPolygon( *multiIt );
if ( !poly->intersects( bufferLineClipped ) )
{
bufferLineClippedIntersectsStratum = false;
delete poly;
break;
}
delete poly;
}
}
if ( bufferLineClippedIntersectsStratum )
{
return bufferLineClipped;
}
}
delete bufferLineClipped; delete clipBaselineBuffer; delete bufferLine;
currentBufferDist /= 2;
}
return 0; //no solution found even with reduced tolerances
}
ErrorList topolTest::checkOverlapWithLayer( QgsVectorLayer *layer1, QgsVectorLayer *layer2, bool isExtent )
{
int i = 0;
ErrorList errorList;
bool skipItself = layer1 == layer2;
QgsSpatialIndex *index = mLayerIndexes[layer2->id()];
QgsGeometry canvasExtentPoly = QgsGeometry::fromWkt( qgsInterface->mapCanvas()->extent().asWktPolygon() );
QList<FeatureLayer>::iterator it;
for ( it = mFeatureList1.begin(); it != mFeatureList1.end(); ++it )
{
if ( !( ++i % 100 ) )
emit progress( i );
if ( testCanceled() )
break;
QgsGeometry g1 = it->feature.geometry();
QgsRectangle bb = g1.boundingBox();
QList<QgsFeatureId> crossingIds;
crossingIds = index->intersects( bb );
QList<QgsFeatureId>::ConstIterator cit = crossingIds.begin();
QList<QgsFeatureId>::ConstIterator crossingIdsEnd = crossingIds.end();
for ( ; cit != crossingIdsEnd; ++cit )
{
QgsFeature &f = mFeatureMap2[*cit].feature;
QgsGeometry g2 = f.geometry();
// skip itself, when invoked with the same layer
if ( skipItself && f.id() == it->feature.id() )
continue;
if ( g2.isNull() )
{
QgsMessageLog::logMessage( tr( "Second geometry missing." ), tr( "Topology plugin" ) );
continue;
}
if ( g1.overlaps( g2 ) )
{
QgsRectangle r = bb;
QgsRectangle r2 = g2.boundingBox();
r.combineExtentWith( r2 );
QgsGeometry conflictGeom = g1.intersection( g2 );
// could this for some reason return NULL?
if ( conflictGeom.isNull() )
{
continue;
}
if ( isExtent )
{
if ( canvasExtentPoly.disjoint( conflictGeom ) )
{
continue;
}
if ( canvasExtentPoly.crosses( conflictGeom ) )
{
conflictGeom = conflictGeom.intersection( canvasExtentPoly );
}
}
//c = new QgsGeometry;
QList<FeatureLayer> fls;
FeatureLayer fl;
fl.feature = f;
fl.layer = layer2;
fls << *it << fl;
TopolErrorIntersection *err = new TopolErrorIntersection( r, conflictGeom, fls );
errorList << err;
}
}
}
return errorList;
}
ErrorList topolTest::checkGaps( QgsVectorLayer *layer1, QgsVectorLayer *layer2, bool isExtent )
{
Q_UNUSED( layer2 );
int i = 0;
ErrorList errorList;
GEOSContextHandle_t geosctxt = QgsGeos::getGEOSHandler();
// could be enabled for lines and points too
// so duplicate rule may be removed?
if ( layer1->geometryType() != QgsWkbTypes::PolygonGeometry )
{
return errorList;
}
QList<FeatureLayer>::iterator it;
QgsGeometry g1;
QList<GEOSGeometry *> geomList;
qDebug() << mFeatureList1.count() << " features in list!";
for ( it = mFeatureList1.begin(); it != mFeatureList1.end(); ++it )
{
qDebug() << "reading features-" << i;
if ( !( ++i % 100 ) )
{
emit progress( i );
}
if ( testCanceled() )
{
break;
}
g1 = it->feature.geometry();
if ( g1.isNull() )
{
continue;
}
if ( !_canExportToGeos( g1 ) )
{
continue;
}
if ( !g1.isGeosValid() )
{
qDebug() << "invalid geometry found..skipping.." << it->feature.id();
continue;
}
if ( g1.isMultipart() )
{
QgsMultiPolygonXY polys = g1.asMultiPolygon();
for ( int m = 0; m < polys.count(); m++ )
{
QgsPolygonXY polygon = polys[m];
QgsGeometry polyGeom = QgsGeometry::fromPolygonXY( polygon );
geomList.push_back( QgsGeos::asGeos( polyGeom ).release() );
}
}
else
{
geomList.push_back( QgsGeos::asGeos( g1 ).release() );
}
}
GEOSGeometry **geomArray = new GEOSGeometry*[geomList.size()];
for ( int i = 0; i < geomList.size(); ++i )
{
//qDebug() << "filling geometry array-" << i;
geomArray[i] = geomList.at( i );
}
qDebug() << "creating geometry collection-";
if ( geomList.isEmpty() )
{
//qDebug() << "geometry list is empty!";
delete [] geomArray;
return errorList;
}
GEOSGeometry *collection = nullptr;
collection = GEOSGeom_createCollection_r( geosctxt, GEOS_MULTIPOLYGON, geomArray, geomList.size() );
qDebug() << "performing cascaded union..might take time..-";
GEOSGeometry *unionGeom = GEOSUnionCascaded_r( geosctxt, collection );
//delete[] geomArray;
QgsGeometry test = QgsGeos::geometryFromGeos( unionGeom );
//qDebug() << "wktmerged - " << test.exportToWkt();
QString extentWkt = test.boundingBox().asWktPolygon();
QgsGeometry extentGeom = QgsGeometry::fromWkt( extentWkt );
QgsGeometry bufferExtent = extentGeom.buffer( 2, 3 );
//qDebug() << "extent wkt - " << bufferExtent->exportToWkt();
QgsGeometry diffGeoms = bufferExtent.difference( test );
if ( !diffGeoms )
{
qDebug() << "difference result 0-";
return errorList;
}
//qDebug() << "difference gometry - " << diffGeoms->exportToWkt();
QVector<QgsGeometry> geomColl = diffGeoms.asGeometryCollection();
QgsGeometry canvasExtentPoly = QgsGeometry::fromWkt( qgsInterface->mapCanvas()->extent().asWktPolygon() );
for ( int i = 1; i < geomColl.count() ; ++i )
{
QgsGeometry conflictGeom = geomColl[i];
if ( isExtent )
{
if ( canvasExtentPoly.disjoint( conflictGeom ) )
{
continue;
}
if ( canvasExtentPoly.crosses( conflictGeom ) )
{
conflictGeom = conflictGeom.intersection( canvasExtentPoly );
}
}
QgsRectangle bBox = conflictGeom.boundingBox();
FeatureLayer ftrLayer1;
ftrLayer1.layer = layer1;
QList<FeatureLayer> errorFtrLayers;
errorFtrLayers << ftrLayer1 << ftrLayer1;
TopolErrorGaps *err = new TopolErrorGaps( bBox, conflictGeom, errorFtrLayers );
errorList << err;
}
return errorList;
}
ErrorList topolTest::checkOverlaps( QgsVectorLayer *layer1, QgsVectorLayer *layer2, bool isExtent )
{
Q_UNUSED( layer2 );
int i = 0;
ErrorList errorList;
// could be enabled for lines and points too
// so duplicate rule may be removed?
if ( layer1->geometryType() != QgsWkbTypes::PolygonGeometry )
{
return errorList;
}
QList<QgsFeatureId> *duplicateIds = new QList<QgsFeatureId>();
QgsSpatialIndex *index = mLayerIndexes[layer1->id()];
if ( !index )
{
qDebug() << "no index present";
delete duplicateIds;
return errorList;
}
QMap<QgsFeatureId, FeatureLayer>::const_iterator it;
for ( it = mFeatureMap2.constBegin(); it != mFeatureMap2.constEnd(); ++it )
{
if ( !( ++i % 100 ) )
emit progress( i );
QgsFeatureId currentId = it->feature.id();
if ( duplicateIds->contains( currentId ) )
{
//is already a duplicate geometry..skip..
continue;
}
if ( testCanceled() )
break;
QgsGeometry g1 = it->feature.geometry();
if ( !g1.isGeosValid() )
{
qDebug() << "invalid geometry(g1) found..skipping.." << it->feature.id();
continue;
}
QgsRectangle bb = g1.boundingBox();
QList<QgsFeatureId> crossingIds;
crossingIds = index->intersects( bb );
QList<QgsFeatureId>::ConstIterator cit = crossingIds.begin();
QList<QgsFeatureId>::ConstIterator crossingIdsEnd = crossingIds.end();
bool duplicate = false;
QgsGeometry canvasExtentPoly = QgsGeometry::fromWkt( qgsInterface->mapCanvas()->extent().asWktPolygon() );
for ( ; cit != crossingIdsEnd; ++cit )
{
duplicate = false;
// skip itself
if ( mFeatureMap2[*cit].feature.id() == it->feature.id() )
continue;
QgsGeometry g2 = mFeatureMap2[*cit].feature.geometry();
if ( g2.isNull() )
{
QgsMessageLog::logMessage( tr( "Invalid second geometry in overlaps test." ), tr( "Topology plugin" ) );
continue;
}
if ( !_canExportToGeos( g2 ) )
{
QgsMessageLog::logMessage( tr( "Failed to import second geometry into GEOS in overlaps test." ), tr( "Topology plugin" ) );
continue;
}
if ( !g2.isGeosValid() )
{
QgsMessageLog::logMessage( tr( "Skipping invalid second geometry of feature %1 in overlaps test." ).arg( it->feature.id() ), tr( "Topology plugin" ) );
continue;
}
qDebug() << "checking overlap for" << it->feature.id();
if ( g1.overlaps( g2 ) )
{
duplicate = true;
duplicateIds->append( mFeatureMap2[*cit].feature.id() );
}
if ( duplicate )
{
QList<FeatureLayer> fls;
fls << *it << *it;
QgsGeometry conflictGeom = g1.intersection( g2 );
if ( isExtent )
{
if ( canvasExtentPoly.disjoint( conflictGeom ) )
{
continue;
}
if ( canvasExtentPoly.crosses( conflictGeom ) )
{
conflictGeom = conflictGeom.intersection( canvasExtentPoly );
}
}
TopolErrorOverlaps *err = new TopolErrorOverlaps( bb, conflictGeom, fls );
errorList << err;
}
}
}
delete duplicateIds;
return errorList;
}
ErrorList topolTest::checkyLineEndsCoveredByPoints( QgsVectorLayer *layer1, QgsVectorLayer *layer2, bool isExtent )
{
int i = 0;
ErrorList errorList;
if ( layer1->geometryType() != QgsWkbTypes::LineGeometry )
{
return errorList;
}
if ( layer2->geometryType() != QgsWkbTypes::PointGeometry )
{
return errorList;
}
QgsSpatialIndex *index = mLayerIndexes[layer2->id()];
QgsGeometry canvasExtentPoly = QgsGeometry::fromWkt( qgsInterface->mapCanvas()->extent().asWktPolygon() );
QList<FeatureLayer>::Iterator it;
for ( it = mFeatureList1.begin(); it != mFeatureList1.end(); ++it )
{
if ( !( ++i % 100 ) )
emit progress( i );
if ( testCanceled() )
break;
QgsGeometry g1 = it->feature.geometry();
QgsPolylineXY g1Polyline = g1.asPolyline();
QgsGeometry startPoint = QgsGeometry::fromPointXY( g1Polyline.at( 0 ) );
QgsGeometry endPoint = QgsGeometry::fromPointXY( g1Polyline.last() );
QgsRectangle bb = g1.boundingBox();
QList<QgsFeatureId> crossingIds;
crossingIds = index->intersects( bb );
QList<QgsFeatureId>::ConstIterator cit = crossingIds.begin();
QList<QgsFeatureId>::ConstIterator crossingIdsEnd = crossingIds.end();
bool touched = false;
bool touchStartPoint = false;
bool touchEndPoint = false;
for ( ; cit != crossingIdsEnd; ++cit )
{
QgsFeature &f = mFeatureMap2[*cit].feature;
QgsGeometry g2 = f.geometry();
if ( g2.isNull() || !_canExportToGeos( g2 ) )
{
QgsMessageLog::logMessage( tr( "Second geometry missing or GEOS import failed." ), tr( "Topology plugin" ) );
continue;
}
if ( g2.intersects( startPoint ) )
{
touchStartPoint = true;
}
if ( g2.intersects( endPoint ) )
{
touchEndPoint = true;
}
if ( touchStartPoint && touchEndPoint )
{
touched = true;
break;
}
}
if ( !touched )
{
QgsGeometry conflictGeom = g1;
if ( isExtent )
{
if ( canvasExtentPoly.disjoint( conflictGeom ) )
{
continue;
}
if ( canvasExtentPoly.crosses( conflictGeom ) )
{
conflictGeom = conflictGeom.intersection( canvasExtentPoly );
}
}
QList<FeatureLayer> fls;
fls << *it << *it;
//bb.scale(10);
TopolErrorLineEndsNotCoveredByPoints *err = new TopolErrorLineEndsNotCoveredByPoints( bb, conflictGeom, fls );
errorList << err;
}
}
return errorList;
}
QVariantMap QgsClipAlgorithm::processAlgorithm( const QVariantMap ¶meters, QgsProcessingContext &context, QgsProcessingFeedback *feedback )
{
std::unique_ptr< QgsFeatureSource > featureSource( parameterAsSource( parameters, QStringLiteral( "INPUT" ), context ) );
if ( !featureSource )
throw QgsProcessingException( invalidSourceError( parameters, QStringLiteral( "INPUT" ) ) );
std::unique_ptr< QgsFeatureSource > maskSource( parameterAsSource( parameters, QStringLiteral( "OVERLAY" ), context ) );
if ( !maskSource )
throw QgsProcessingException( invalidSourceError( parameters, QStringLiteral( "OVERLAY" ) ) );
QString dest;
QgsWkbTypes::GeometryType sinkType = QgsWkbTypes::geometryType( featureSource->wkbType() );
std::unique_ptr< QgsFeatureSink > sink( parameterAsSink( parameters, QStringLiteral( "OUTPUT" ), context, dest, featureSource->fields(), QgsWkbTypes::multiType( featureSource->wkbType() ), featureSource->sourceCrs() ) );
if ( !sink )
throw QgsProcessingException( invalidSinkError( parameters, QStringLiteral( "OUTPUT" ) ) );
// first build up a list of clip geometries
QVector< QgsGeometry > clipGeoms;
QgsFeatureIterator it = maskSource->getFeatures( QgsFeatureRequest().setSubsetOfAttributes( QList< int >() ).setDestinationCrs( featureSource->sourceCrs(), context.transformContext() ) );
QgsFeature f;
while ( it.nextFeature( f ) )
{
if ( f.hasGeometry() )
clipGeoms << f.geometry();
}
QVariantMap outputs;
outputs.insert( QStringLiteral( "OUTPUT" ), dest );
if ( clipGeoms.isEmpty() )
return outputs;
// are we clipping against a single feature? if so, we can show finer progress reports
bool singleClipFeature = false;
QgsGeometry combinedClipGeom;
if ( clipGeoms.length() > 1 )
{
combinedClipGeom = QgsGeometry::unaryUnion( clipGeoms );
if ( combinedClipGeom.isEmpty() )
{
throw QgsProcessingException( QObject::tr( "Could not create the combined clip geometry: %1" ).arg( combinedClipGeom.lastError() ) );
}
singleClipFeature = false;
}
else
{
combinedClipGeom = clipGeoms.at( 0 );
singleClipFeature = true;
}
// use prepared geometries for faster intersection tests
std::unique_ptr< QgsGeometryEngine > engine( QgsGeometry::createGeometryEngine( combinedClipGeom.constGet() ) );
engine->prepareGeometry();
QgsFeatureIds testedFeatureIds;
int i = -1;
Q_FOREACH ( const QgsGeometry &clipGeom, clipGeoms )
{
i++;
if ( feedback->isCanceled() )
{
break;
}
QgsFeatureIterator inputIt = featureSource->getFeatures( QgsFeatureRequest().setFilterRect( clipGeom.boundingBox() ) );
QgsFeatureList inputFeatures;
QgsFeature f;
while ( inputIt.nextFeature( f ) )
inputFeatures << f;
if ( inputFeatures.isEmpty() )
continue;
double step = 0;
if ( singleClipFeature )
step = 100.0 / inputFeatures.length();
int current = 0;
Q_FOREACH ( const QgsFeature &inputFeature, inputFeatures )
{
if ( feedback->isCanceled() )
{
break;
}
if ( !inputFeature.hasGeometry() )
continue;
if ( testedFeatureIds.contains( inputFeature.id() ) )
{
// don't retest a feature we have already checked
continue;
}
testedFeatureIds.insert( inputFeature.id() );
if ( !engine->intersects( inputFeature.geometry().constGet() ) )
continue;
QgsGeometry newGeometry;
if ( !engine->contains( inputFeature.geometry().constGet() ) )
{
QgsGeometry currentGeometry = inputFeature.geometry();
newGeometry = combinedClipGeom.intersection( currentGeometry );
if ( newGeometry.wkbType() == QgsWkbTypes::Unknown || QgsWkbTypes::flatType( newGeometry.wkbType() ) == QgsWkbTypes::GeometryCollection )
{
QgsGeometry intCom = inputFeature.geometry().combine( newGeometry );
QgsGeometry intSym = inputFeature.geometry().symDifference( newGeometry );
newGeometry = intCom.difference( intSym );
}
}
else
{
// clip geometry totally contains feature geometry, so no need to perform intersection
newGeometry = inputFeature.geometry();
}
if ( !QgsOverlayUtils::sanitizeIntersectionResult( newGeometry, sinkType ) )
continue;
QgsFeature outputFeature;
outputFeature.setGeometry( newGeometry );
outputFeature.setAttributes( inputFeature.attributes() );
sink->addFeature( outputFeature, QgsFeatureSink::FastInsert );
if ( singleClipFeature )
feedback->setProgress( current * step );
}
if ( !singleClipFeature )
{
// coarse progress report for multiple clip geometries
feedback->setProgress( 100.0 * static_cast< double >( i ) / clipGeoms.length() );
}
}
QgsGeometry* QgsTransectSample::clipBufferLine( const QgsGeometry& stratumGeom, QgsGeometry* clippedBaseline, double tolerance )
{
if ( !stratumGeom || !clippedBaseline || clippedBaseline->wkbType() == QgsWkbTypes::Unknown )
{
return nullptr;
}
QgsGeometry usedBaseline = *clippedBaseline;
if ( mBaselineSimplificationTolerance >= 0 )
{
//int verticesBefore = usedBaseline->asMultiPolyline().count();
usedBaseline = clippedBaseline->simplify( mBaselineSimplificationTolerance );
if ( usedBaseline.isEmpty() )
{
return nullptr;
}
//int verticesAfter = usedBaseline->asMultiPolyline().count();
//debug: write to file
/*QgsVectorFileWriter debugWriter( "/tmp/debug.shp", "utf-8", QgsFields(), QgsWkbTypes::LineString, &( mStrataLayer->crs() ) );
QgsFeature debugFeature; debugFeature.setGeometry( usedBaseline );
debugWriter.addFeature( debugFeature );*/
}
double currentBufferDist = tolerance;
int maxLoops = 10;
for ( int i = 0; i < maxLoops; ++i )
{
//loop with tolerance: create buffer, convert buffer to line, clip line by stratum, test if result is (single) line
QgsGeometry clipBaselineBuffer = usedBaseline.buffer( currentBufferDist, 8 );
if ( clipBaselineBuffer.isEmpty() )
{
continue;
}
//it is also possible that clipBaselineBuffer is a multipolygon
QgsGeometry bufferLine; //buffer line or multiline
QgsGeometry bufferLineClipped;
QgsMultiPolyline mpl;
if ( clipBaselineBuffer.isMultipart() )
{
QgsMultiPolygon bufferMultiPolygon = clipBaselineBuffer.asMultiPolygon();
if ( bufferMultiPolygon.size() < 1 )
{
continue;
}
for ( int j = 0; j < bufferMultiPolygon.size(); ++j )
{
int size = bufferMultiPolygon.at( j ).size();
for ( int k = 0; k < size; ++k )
{
mpl.append( bufferMultiPolygon.at( j ).at( k ) );
}
}
bufferLine = QgsGeometry::fromMultiPolyline( mpl );
}
else
{
QgsPolygon bufferPolygon = clipBaselineBuffer.asPolygon();
if ( bufferPolygon.size() < 1 )
{
continue;
}
int size = bufferPolygon.size();
mpl.reserve( size );
for ( int j = 0; j < size; ++j )
{
mpl.append( bufferPolygon[j] );
}
bufferLine = QgsGeometry::fromMultiPolyline( mpl );
}
bufferLineClipped = bufferLine.intersection( stratumGeom );
if ( bufferLineClipped.isEmpty() && bufferLineClipped.type() == QgsWkbTypes::LineGeometry )
{
//if stratumGeom is a multipolygon, bufferLineClipped must intersect each part
bool bufferLineClippedIntersectsStratum = true;
if ( stratumGeom.wkbType() == QgsWkbTypes::MultiPolygon || stratumGeom.wkbType() == QgsWkbTypes::MultiPolygon25D )
{
QVector<QgsPolygon> multiPoly = stratumGeom.asMultiPolygon();
QVector<QgsPolygon>::const_iterator multiIt = multiPoly.constBegin();
for ( ; multiIt != multiPoly.constEnd(); ++multiIt )
{
QgsGeometry poly = QgsGeometry::fromPolygon( *multiIt );
if ( !poly.intersects( bufferLineClipped ) )
{
bufferLineClippedIntersectsStratum = false;
break;
}
}
}
if ( bufferLineClippedIntersectsStratum )
{
return new QgsGeometry( bufferLineClipped );
}
}
currentBufferDist /= 2;
}
return nullptr; //no solution found even with reduced tolerances
}
void QgsPalLayerSettings::registerFeature( QgsFeature& f, const QgsRenderContext& context )
{
QString labelText;
if ( formatNumbers == true
&& ( f.attributeMap()[fieldIndex].type() == QVariant::Int || f.attributeMap()[fieldIndex].type() == QVariant::Double ) )
{
QString numberFormat;
double d = f.attributeMap()[fieldIndex].toDouble();
if ( d > 0 && plusSign == true )
{
numberFormat.append( "+" );
}
numberFormat.append( "%1" );
labelText = numberFormat.arg( d, 0, 'f', decimals );
}
else
{
labelText = f.attributeMap()[fieldIndex].toString();
}
double labelX, labelY; // will receive label size
QFont labelFont = textFont;
//data defined label size?
QMap< DataDefinedProperties, int >::const_iterator it = dataDefinedProperties.find( QgsPalLayerSettings::Size );
if ( it != dataDefinedProperties.constEnd() )
{
//find out size
QVariant size = f.attributeMap().value( *it );
if ( size.isValid() )
{
double sizeDouble = size.toDouble();
if ( sizeDouble <= 0 )
{
return;
}
labelFont.setPixelSize( sizeToPixel( sizeDouble, context ) );
}
QFontMetricsF labelFontMetrics( labelFont );
calculateLabelSize( &labelFontMetrics, labelText, labelX, labelY );
}
else
{
calculateLabelSize( fontMetrics, labelText, labelX, labelY );
}
QgsGeometry* geom = f.geometry();
if ( ct ) // reproject the geometry if necessary
geom->transform( *ct );
if ( !checkMinimumSizeMM( context, geom, minFeatureSize ) )
{
return;
}
// CLIP the geometry if it is bigger than the extent
QgsGeometry* geomClipped = NULL;
GEOSGeometry* geos_geom;
bool do_clip = !extentGeom->contains( geom );
if ( do_clip )
{
geomClipped = geom->intersection( extentGeom ); // creates new geometry
geos_geom = geomClipped->asGeos();
}
else
{
geos_geom = geom->asGeos();
}
if ( geos_geom == NULL )
return; // invalid geometry
GEOSGeometry* geos_geom_clone = GEOSGeom_clone( geos_geom );
if ( do_clip )
delete geomClipped;
//data defined position / alignment / rotation?
bool dataDefinedPosition = false;
bool dataDefinedRotation = false;
double xPos = 0.0, yPos = 0.0, angle = 0.0;
bool ddXPos, ddYPos;
QMap< DataDefinedProperties, int >::const_iterator dPosXIt = dataDefinedProperties.find( QgsPalLayerSettings::PositionX );
if ( dPosXIt != dataDefinedProperties.constEnd() )
{
QMap< DataDefinedProperties, int >::const_iterator dPosYIt = dataDefinedProperties.find( QgsPalLayerSettings::PositionY );
if ( dPosYIt != dataDefinedProperties.constEnd() )
{
//data defined position. But field values could be NULL -> positions will be generated by PAL
xPos = f.attributeMap().value( *dPosXIt ).toDouble( &ddXPos );
yPos = f.attributeMap().value( *dPosYIt ).toDouble( &ddYPos );
if ( ddXPos && ddYPos )
{
dataDefinedPosition = true;
//x/y shift in case of alignment
double xdiff = 0;
double ydiff = 0;
//horizontal alignment
QMap< DataDefinedProperties, int >::const_iterator haliIt = dataDefinedProperties.find( QgsPalLayerSettings::Hali );
if ( haliIt != dataDefinedProperties.end() )
{
QString haliString = f.attributeMap().value( *haliIt ).toString();
if ( haliString.compare( "Center", Qt::CaseInsensitive ) == 0 )
{
xdiff -= labelX / 2.0;
}
else if ( haliString.compare( "Right", Qt::CaseInsensitive ) == 0 )
{
xdiff -= labelX;
}
}
//vertical alignment
QMap< DataDefinedProperties, int >::const_iterator valiIt = dataDefinedProperties.find( QgsPalLayerSettings::Vali );
if ( valiIt != dataDefinedProperties.constEnd() )
{
QString valiString = f.attributeMap().value( *valiIt ).toString();
if ( valiString.compare( "Bottom", Qt::CaseInsensitive ) != 0 )
{
if ( valiString.compare( "Top", Qt::CaseInsensitive ) == 0 || valiString.compare( "Cap", Qt::CaseInsensitive ) == 0 )
{
ydiff -= labelY;
}
else
{
QFontMetrics labelFontMetrics( labelFont );
double descentRatio = labelFontMetrics.descent() / labelFontMetrics.height();
if ( valiString.compare( "Base", Qt::CaseInsensitive ) == 0 )
{
ydiff -= labelY * descentRatio;
}
else if ( valiString.compare( "Half", Qt::CaseInsensitive ) == 0 )
{
ydiff -= labelY * descentRatio;
ydiff -= labelY * 0.5 * ( 1 - descentRatio );
}
}
}
}
//data defined rotation?
QMap< DataDefinedProperties, int >::const_iterator rotIt = dataDefinedProperties.find( QgsPalLayerSettings::Rotation );
if ( rotIt != dataDefinedProperties.constEnd() )
{
dataDefinedRotation = true;
angle = f.attributeMap().value( *rotIt ).toDouble() * M_PI / 180;
//adjust xdiff and ydiff because the hali/vali point needs to be the rotation center
double xd = xdiff * cos( angle ) - ydiff * sin( angle );
double yd = xdiff * sin( angle ) + ydiff * cos( angle );
xdiff = xd;
ydiff = yd;
}
//project xPos and yPos from layer to map CRS
double z = 0;
if ( ct )
{
ct->transformInPlace( xPos, yPos, z );
}
yPos += ydiff;
xPos += xdiff;
}
}
}
QgsPalGeometry* lbl = new QgsPalGeometry( f.id(), labelText, geos_geom_clone );
// record the created geometry - it will be deleted at the end.
geometries.append( lbl );
// register feature to the layer
try
{
if ( !palLayer->registerFeature( lbl->strId(), lbl, labelX, labelY, labelText.toUtf8().constData(),
xPos, yPos, dataDefinedPosition, angle, dataDefinedRotation ) )
return;
}
catch ( std::exception &e )
{
Q_UNUSED( e );
QgsDebugMsg( QString( "Ignoring feature %1 due PAL exception: " ).arg( f.id() ) + QString::fromLatin1( e.what() ) );
return;
}
// TODO: only for placement which needs character info
pal::Feature* feat = palLayer->getFeature( lbl->strId() );
feat->setLabelInfo( lbl->info( fontMetrics, xform, rasterCompressFactor ) );
// TODO: allow layer-wide feature dist in PAL...?
//data defined label-feature distance?
double distance = dist;
QMap< DataDefinedProperties, int >::const_iterator dDistIt = dataDefinedProperties.find( QgsPalLayerSettings::LabelDistance );
if ( dDistIt != dataDefinedProperties.constEnd() )
{
distance = f.attributeMap().value( *dDistIt ).toDouble();
}
if ( distance != 0 )
{
if ( distInMapUnits ) //convert distance from mm/map units to pixels
{
distance /= context.mapToPixel().mapUnitsPerPixel();
}
else //mm
{
distance *= vectorScaleFactor;
}
feat->setDistLabel( qAbs( ptOne.x() - ptZero.x() )* distance );
}
//add parameters for data defined labeling to QgsPalGeometry
QMap< DataDefinedProperties, int >::const_iterator dIt = dataDefinedProperties.constBegin();
for ( ; dIt != dataDefinedProperties.constEnd(); ++dIt )
{
lbl->addDataDefinedValue( dIt.key(), f.attributeMap()[dIt.value()] );
}
}
