//------------------------------sched_call-------------------------------------
uint Block::sched_call( Matcher &m, Block_Array &bbs, uint node_cnt, Node_List &worklist, int *ready_cnt, MachCallNode *mcall, VectorSet &next_call ) {
RegMask regs;
// Schedule all the users of the call right now. All the users are
// projection Nodes, so they must be scheduled next to the call.
// Collect all the defined registers.
for (DUIterator_Fast imax, i = mcall->fast_outs(imax); i < imax; i++) {
Node* n = mcall->fast_out(i);
assert( n->Opcode()==Op_MachProj, "" );
--ready_cnt[n->_idx];
assert( !ready_cnt[n->_idx], "" );
// Schedule next to call
_nodes.map(node_cnt++, n);
// Collect defined registers
regs.OR(n->out_RegMask());
// Check for scheduling the next control-definer
if( n->bottom_type() == Type::CONTROL )
// Warm up next pile of heuristic bits
needed_for_next_call(n, next_call, bbs);
// Children of projections are now all ready
for (DUIterator_Fast jmax, j = n->fast_outs(jmax); j < jmax; j++) {
Node* m = n->fast_out(j); // Get user
if( bbs[m->_idx] != this ) continue;
if( m->is_Phi() ) continue;
if( !--ready_cnt[m->_idx] )
worklist.push(m);
}
}
// Act as if the call defines the Frame Pointer.
// Certainly the FP is alive and well after the call.
regs.Insert(m.c_frame_pointer());
// Set all registers killed and not already defined by the call.
uint r_cnt = mcall->tf()->range()->cnt();
int op = mcall->ideal_Opcode();
MachProjNode *proj = new (1) MachProjNode( mcall, r_cnt+1, RegMask::Empty, MachProjNode::fat_proj );
bbs.map(proj->_idx,this);
_nodes.insert(node_cnt++, proj);
for( OptoReg::Name r = OptoReg::Name(0); r < _last_Mach_Reg; r=OptoReg::add(r,1) ) {
if( !regs.Member(r) ) { // Not already defined by the call
// Save-on-call register?
if( (m._register_save_policy[r] == 'C') ||
(m._register_save_policy[r] == 'A') ||
((m._register_save_policy[r] == 'E') &&
(op == Op_CallRuntime ||
op == Op_CallNative ||
op == Op_CallInterpreter ||
op == Op_CallLeaf)) ) {
proj->_rout.Insert(r);
}
}
}
return node_cnt;
}
//------------------------------schedule_local---------------------------------
// Topological sort within a block. Someday become a real scheduler.
bool PhaseCFG::schedule_local(Block* block, GrowableArray<int>& ready_cnt, VectorSet& next_call) {
// Already "sorted" are the block start Node (as the first entry), and
// the block-ending Node and any trailing control projections. We leave
// these alone. PhiNodes and ParmNodes are made to follow the block start
// Node. Everything else gets topo-sorted.
#ifndef PRODUCT
if (trace_opto_pipelining()) {
tty->print_cr("# --- schedule_local B%d, before: ---", block->_pre_order);
for (uint i = 0;i < block->number_of_nodes(); i++) {
tty->print("# ");
block->get_node(i)->fast_dump();
}
tty->print_cr("#");
}
#endif
// RootNode is already sorted
if (block->number_of_nodes() == 1) {
return true;
}
// Move PhiNodes and ParmNodes from 1 to cnt up to the start
uint node_cnt = block->end_idx();
uint phi_cnt = 1;
uint i;
for( i = 1; i<node_cnt; i++ ) { // Scan for Phi
Node *n = block->get_node(i);
if( n->is_Phi() || // Found a PhiNode or ParmNode
(n->is_Proj() && n->in(0) == block->head()) ) {
// Move guy at 'phi_cnt' to the end; makes a hole at phi_cnt
block->map_node(block->get_node(phi_cnt), i);
block->map_node(n, phi_cnt++); // swap Phi/Parm up front
} else { // All others
// Count block-local inputs to 'n'
uint cnt = n->len(); // Input count
uint local = 0;
for( uint j=0; j<cnt; j++ ) {
Node *m = n->in(j);
if( m && get_block_for_node(m) == block && !m->is_top() )
local++; // One more block-local input
}
ready_cnt.at_put(n->_idx, local); // Count em up
#ifdef ASSERT
if( UseConcMarkSweepGC || UseG1GC ) {
if( n->is_Mach() && n->as_Mach()->ideal_Opcode() == Op_StoreCM ) {
// Check the precedence edges
for (uint prec = n->req(); prec < n->len(); prec++) {
Node* oop_store = n->in(prec);
if (oop_store != NULL) {
assert(get_block_for_node(oop_store)->_dom_depth <= block->_dom_depth, "oop_store must dominate card-mark");
}
}
}
}
#endif
// A few node types require changing a required edge to a precedence edge
// before allocation.
if( n->is_Mach() && n->req() > TypeFunc::Parms &&
(n->as_Mach()->ideal_Opcode() == Op_MemBarAcquire ||
n->as_Mach()->ideal_Opcode() == Op_MemBarVolatile) ) {
// MemBarAcquire could be created without Precedent edge.
// del_req() replaces the specified edge with the last input edge
// and then removes the last edge. If the specified edge > number of
// edges the last edge will be moved outside of the input edges array
// and the edge will be lost. This is why this code should be
// executed only when Precedent (== TypeFunc::Parms) edge is present.
Node *x = n->in(TypeFunc::Parms);
n->del_req(TypeFunc::Parms);
n->add_prec(x);
}
}
}
for(uint i2=i; i2< block->number_of_nodes(); i2++ ) // Trailing guys get zapped count
ready_cnt.at_put(block->get_node(i2)->_idx, 0);
// All the prescheduled guys do not hold back internal nodes
uint i3;
for(i3 = 0; i3<phi_cnt; i3++ ) { // For all pre-scheduled
Node *n = block->get_node(i3); // Get pre-scheduled
for (DUIterator_Fast jmax, j = n->fast_outs(jmax); j < jmax; j++) {
Node* m = n->fast_out(j);
if (get_block_for_node(m) == block) { // Local-block user
int m_cnt = ready_cnt.at(m->_idx)-1;
ready_cnt.at_put(m->_idx, m_cnt); // Fix ready count
}
}
}
Node_List delay;
// Make a worklist
Node_List worklist;
for(uint i4=i3; i4<node_cnt; i4++ ) { // Put ready guys on worklist
Node *m = block->get_node(i4);
if( !ready_cnt.at(m->_idx) ) { // Zero ready count?
if (m->is_iteratively_computed()) {
// Push induction variable increments last to allow other uses
// of the phi to be scheduled first. The select() method breaks
// ties in scheduling by worklist order.
delay.push(m);
} else if (m->is_Mach() && m->as_Mach()->ideal_Opcode() == Op_CreateEx) {
// Force the CreateEx to the top of the list so it's processed
// first and ends up at the start of the block.
worklist.insert(0, m);
} else {
worklist.push(m); // Then on to worklist!
}
}
}
while (delay.size()) {
Node* d = delay.pop();
worklist.push(d);
}
// Warm up the 'next_call' heuristic bits
needed_for_next_call(block, block->head(), next_call);
#ifndef PRODUCT
if (trace_opto_pipelining()) {
for (uint j=0; j< block->number_of_nodes(); j++) {
Node *n = block->get_node(j);
int idx = n->_idx;
tty->print("# ready cnt:%3d ", ready_cnt.at(idx));
tty->print("latency:%3d ", get_latency_for_node(n));
tty->print("%4d: %s\n", idx, n->Name());
}
}
#endif
uint max_idx = (uint)ready_cnt.length();
// Pull from worklist and schedule
while( worklist.size() ) { // Worklist is not ready
#ifndef PRODUCT
if (trace_opto_pipelining()) {
tty->print("# ready list:");
for( uint i=0; i<worklist.size(); i++ ) { // Inspect entire worklist
Node *n = worklist[i]; // Get Node on worklist
tty->print(" %d", n->_idx);
}
tty->cr();
}
#endif
// Select and pop a ready guy from worklist
Node* n = select(block, worklist, ready_cnt, next_call, phi_cnt);
block->map_node(n, phi_cnt++); // Schedule him next
#ifndef PRODUCT
if (trace_opto_pipelining()) {
tty->print("# select %d: %s", n->_idx, n->Name());
tty->print(", latency:%d", get_latency_for_node(n));
n->dump();
if (Verbose) {
tty->print("# ready list:");
for( uint i=0; i<worklist.size(); i++ ) { // Inspect entire worklist
Node *n = worklist[i]; // Get Node on worklist
tty->print(" %d", n->_idx);
}
tty->cr();
}
}
#endif
if( n->is_MachCall() ) {
MachCallNode *mcall = n->as_MachCall();
phi_cnt = sched_call(block, phi_cnt, worklist, ready_cnt, mcall, next_call);
continue;
}
if (n->is_Mach() && n->as_Mach()->has_call()) {
RegMask regs;
regs.Insert(_matcher.c_frame_pointer());
regs.OR(n->out_RegMask());
MachProjNode *proj = new (C) MachProjNode( n, 1, RegMask::Empty, MachProjNode::fat_proj );
map_node_to_block(proj, block);
block->insert_node(proj, phi_cnt++);
add_call_kills(proj, regs, _matcher._c_reg_save_policy, false);
}
// Children are now all ready
for (DUIterator_Fast i5max, i5 = n->fast_outs(i5max); i5 < i5max; i5++) {
Node* m = n->fast_out(i5); // Get user
if (get_block_for_node(m) != block) {
continue;
}
if( m->is_Phi() ) continue;
if (m->_idx >= max_idx) { // new node, skip it
assert(m->is_MachProj() && n->is_Mach() && n->as_Mach()->has_call(), "unexpected node types");
continue;
}
int m_cnt = ready_cnt.at(m->_idx)-1;
ready_cnt.at_put(m->_idx, m_cnt);
if( m_cnt == 0 )
worklist.push(m);
}
}
if( phi_cnt != block->end_idx() ) {
// did not schedule all. Retry, Bailout, or Die
if (C->subsume_loads() == true && !C->failing()) {
// Retry with subsume_loads == false
// If this is the first failure, the sentinel string will "stick"
// to the Compile object, and the C2Compiler will see it and retry.
C->record_failure(C2Compiler::retry_no_subsuming_loads());
}
// assert( phi_cnt == end_idx(), "did not schedule all" );
return false;
}
#ifndef PRODUCT
if (trace_opto_pipelining()) {
tty->print_cr("#");
tty->print_cr("# after schedule_local");
for (uint i = 0;i < block->number_of_nodes();i++) {
tty->print("# ");
block->get_node(i)->fast_dump();
}
tty->cr();
}
#endif
return true;
}
//------------------------------sched_call-------------------------------------
uint PhaseCFG::sched_call(Block* block, uint node_cnt, Node_List& worklist, GrowableArray<int>& ready_cnt, MachCallNode* mcall, VectorSet& next_call) {
RegMask regs;
// Schedule all the users of the call right now. All the users are
// projection Nodes, so they must be scheduled next to the call.
// Collect all the defined registers.
for (DUIterator_Fast imax, i = mcall->fast_outs(imax); i < imax; i++) {
Node* n = mcall->fast_out(i);
assert( n->is_MachProj(), "" );
int n_cnt = ready_cnt.at(n->_idx)-1;
ready_cnt.at_put(n->_idx, n_cnt);
assert( n_cnt == 0, "" );
// Schedule next to call
block->map_node(n, node_cnt++);
// Collect defined registers
regs.OR(n->out_RegMask());
// Check for scheduling the next control-definer
if( n->bottom_type() == Type::CONTROL )
// Warm up next pile of heuristic bits
needed_for_next_call(block, n, next_call);
// Children of projections are now all ready
for (DUIterator_Fast jmax, j = n->fast_outs(jmax); j < jmax; j++) {
Node* m = n->fast_out(j); // Get user
if(get_block_for_node(m) != block) {
continue;
}
if( m->is_Phi() ) continue;
int m_cnt = ready_cnt.at(m->_idx)-1;
ready_cnt.at_put(m->_idx, m_cnt);
if( m_cnt == 0 )
worklist.push(m);
}
}
// Act as if the call defines the Frame Pointer.
// Certainly the FP is alive and well after the call.
regs.Insert(_matcher.c_frame_pointer());
// Set all registers killed and not already defined by the call.
uint r_cnt = mcall->tf()->range()->cnt();
int op = mcall->ideal_Opcode();
MachProjNode *proj = new (C) MachProjNode( mcall, r_cnt+1, RegMask::Empty, MachProjNode::fat_proj );
map_node_to_block(proj, block);
block->insert_node(proj, node_cnt++);
// Select the right register save policy.
const char * save_policy;
switch (op) {
case Op_CallRuntime:
case Op_CallLeaf:
case Op_CallLeafNoFP:
// Calling C code so use C calling convention
save_policy = _matcher._c_reg_save_policy;
break;
case Op_CallStaticJava:
case Op_CallDynamicJava:
// Calling Java code so use Java calling convention
save_policy = _matcher._register_save_policy;
break;
default:
ShouldNotReachHere();
}
// When using CallRuntime mark SOE registers as killed by the call
// so values that could show up in the RegisterMap aren't live in a
// callee saved register since the register wouldn't know where to
// find them. CallLeaf and CallLeafNoFP are ok because they can't
// have debug info on them. Strictly speaking this only needs to be
// done for oops since idealreg2debugmask takes care of debug info
// references but there no way to handle oops differently than other
// pointers as far as the kill mask goes.
bool exclude_soe = op == Op_CallRuntime;
// If the call is a MethodHandle invoke, we need to exclude the
// register which is used to save the SP value over MH invokes from
// the mask. Otherwise this register could be used for
// deoptimization information.
if (op == Op_CallStaticJava) {
MachCallStaticJavaNode* mcallstaticjava = (MachCallStaticJavaNode*) mcall;
if (mcallstaticjava->_method_handle_invoke)
proj->_rout.OR(Matcher::method_handle_invoke_SP_save_mask());
}
add_call_kills(proj, regs, save_policy, exclude_soe);
return node_cnt;
}
//------------------------------sched_call-------------------------------------
uint Block::sched_call( Matcher &matcher, Block_Array &bbs, uint node_cnt, Node_List &worklist, int *ready_cnt, MachCallNode *mcall, VectorSet &next_call ) {
RegMask regs;
// Schedule all the users of the call right now. All the users are
// projection Nodes, so they must be scheduled next to the call.
// Collect all the defined registers.
for (DUIterator_Fast imax, i = mcall->fast_outs(imax); i < imax; i++) {
Node* n = mcall->fast_out(i);
assert( n->Opcode()==Op_MachProj, "" );
--ready_cnt[n->_idx];
assert( !ready_cnt[n->_idx], "" );
// Schedule next to call
_nodes.map(node_cnt++, n);
// Collect defined registers
regs.OR(n->out_RegMask());
// Check for scheduling the next control-definer
if( n->bottom_type() == Type::CONTROL )
// Warm up next pile of heuristic bits
needed_for_next_call(n, next_call, bbs);
// Children of projections are now all ready
for (DUIterator_Fast jmax, j = n->fast_outs(jmax); j < jmax; j++) {
Node* m = n->fast_out(j); // Get user
if( bbs[m->_idx] != this ) continue;
if( m->is_Phi() ) continue;
if( !--ready_cnt[m->_idx] )
worklist.push(m);
}
}
// Act as if the call defines the Frame Pointer.
// Certainly the FP is alive and well after the call.
regs.Insert(matcher.c_frame_pointer());
// Set all registers killed and not already defined by the call.
uint r_cnt = mcall->tf()->range()->cnt();
int op = mcall->ideal_Opcode();
MachProjNode *proj = new (matcher.C, 1) MachProjNode( mcall, r_cnt+1, RegMask::Empty, MachProjNode::fat_proj );
bbs.map(proj->_idx,this);
_nodes.insert(node_cnt++, proj);
// Select the right register save policy.
const char * save_policy;
switch (op) {
case Op_CallRuntime:
case Op_CallLeaf:
case Op_CallLeafNoFP:
// Calling C code so use C calling convention
save_policy = matcher._c_reg_save_policy;
break;
case Op_CallStaticJava:
case Op_CallDynamicJava:
// Calling Java code so use Java calling convention
save_policy = matcher._register_save_policy;
break;
default:
ShouldNotReachHere();
}
// When using CallRuntime mark SOE registers as killed by the call
// so values that could show up in the RegisterMap aren't live in a
// callee saved register since the register wouldn't know where to
// find them. CallLeaf and CallLeafNoFP are ok because they can't
// have debug info on them. Strictly speaking this only needs to be
// done for oops since idealreg2debugmask takes care of debug info
// references but there no way to handle oops differently than other
// pointers as far as the kill mask goes.
bool exclude_soe = op == Op_CallRuntime;
// If the call is a MethodHandle invoke, we need to exclude the
// register which is used to save the SP value over MH invokes from
// the mask. Otherwise this register could be used for
// deoptimization information.
if (op == Op_CallStaticJava) {
MachCallStaticJavaNode* mcallstaticjava = (MachCallStaticJavaNode*) mcall;
if (mcallstaticjava->_method_handle_invoke)
proj->_rout.OR(Matcher::method_handle_invoke_SP_save_mask());
}
// Fill in the kill mask for the call
for( OptoReg::Name r = OptoReg::Name(0); r < _last_Mach_Reg; r=OptoReg::add(r,1) ) {
if( !regs.Member(r) ) { // Not already defined by the call
// Save-on-call register?
if ((save_policy[r] == 'C') ||
(save_policy[r] == 'A') ||
((save_policy[r] == 'E') && exclude_soe)) {
proj->_rout.Insert(r);
}
}
}
return node_cnt;
}