/** write an op to the oplog that is already built.
todo : make _logOpRS() call this so we don't repeat ourself?
*/
OpTime _logOpObjRS(OperationContext* txn, const BSONObj& op) {
Lock::DBLock lk(txn->lockState(), "local", newlm::MODE_X);
// XXX soon this needs to be part of an outer WUOW not its own.
// We can't do this yet due to locking limitations.
WriteUnitOfWork wunit(txn);
const OpTime ts = op["ts"]._opTime();
long long hash = op["h"].numberLong();
{
if ( localOplogRSCollection == 0 ) {
Client::Context ctx(txn, rsoplog);
localDB = ctx.db();
verify( localDB );
localOplogRSCollection = localDB->getCollection(txn, rsoplog);
massert(13389,
"local.oplog.rs missing. did you drop it? if so restart server",
localOplogRSCollection);
}
Client::Context ctx(txn, rsoplog, localDB);
checkOplogInsert(localOplogRSCollection->insertDocument(txn, op, false));
ReplicationCoordinator* replCoord = getGlobalReplicationCoordinator();
OpTime myLastOptime = replCoord->getMyLastOptime();
if (!(myLastOptime < ts)) {
severe() << "replication oplog stream went back in time. previous timestamp: "
<< myLastOptime << " newest timestamp: " << ts;
fassertFailedNoTrace(18905);
}
BackgroundSync* bgsync = BackgroundSync::get();
// Keep this up-to-date, in case we step up to primary.
bgsync->setLastAppliedHash(hash);
ctx.getClient()->setLastOp( ts );
replCoord->setMyLastOptime(txn, ts);
bgsync->notify();
}
setNewOptime(ts);
wunit.commit();
return ts;
}
/* tail an oplog. ok to return, will be re-called. */
void SyncTail::oplogApplication() {
ReplicationCoordinator* replCoord = getGlobalReplicationCoordinator();
while(!inShutdown()) {
OpQueue ops;
OperationContextImpl txn;
Timer batchTimer;
int lastTimeChecked = 0;
do {
int now = batchTimer.seconds();
// apply replication batch limits
if (!ops.empty()) {
if (now > replBatchLimitSeconds)
break;
if (ops.getDeque().size() > replBatchLimitOperations)
break;
}
// occasionally check some things
// (always checked in the first iteration of this do-while loop, because
// ops is empty)
if (ops.empty() || now > lastTimeChecked) {
BackgroundSync* bgsync = BackgroundSync::get();
if (bgsync->getInitialSyncRequestedFlag()) {
// got a resync command
Lock::DBLock lk(txn.lockState(), "local", MODE_X);
WriteUnitOfWork wunit(&txn);
Client::Context ctx(&txn, "local");
ctx.db()->dropCollection(&txn, "local.oplog.rs");
// Note: the following order is important.
// The bgsync thread uses an empty optime as a sentinel to know to wait
// for initial sync (done in this thread after we return); thus, we must
// ensure the lastAppliedOptime is empty before pausing the bgsync thread
// via stop().
// We must clear the sync source blacklist after calling stop()
// because the bgsync thread, while running, may update the blacklist.
replCoord->setMyLastOptime(&txn, OpTime());
bgsync->stop();
replCoord->clearSyncSourceBlacklist();
wunit.commit();
return;
}
lastTimeChecked = now;
// can we become secondary?
// we have to check this before calling mgr, as we must be a secondary to
// become primary
tryToGoLiveAsASecondary(&txn, replCoord);
// TODO(emilkie): This can be removed once we switch over from legacy;
// this code is what moves 1-node sets to PRIMARY state.
// normally msgCheckNewState gets called periodically, but in a single node
// replset there are no heartbeat threads, so we do it here to be sure. this is
// relevant if the singleton member has done a stepDown() and needs to come back
// up.
if (theReplSet &&
theReplSet->config().members.size() == 1 &&
theReplSet->myConfig().potentiallyHot()) {
Manager* mgr = theReplSet->mgr;
// When would mgr be null? During replsettest'ing, in which case we should
// fall through and actually apply ops as if we were a real secondary.
if (mgr) {
mgr->send(stdx::bind(&Manager::msgCheckNewState, theReplSet->mgr));
sleepsecs(1);
// There should never be ops to sync in a 1-member set, anyway
return;
}
}
}
const int slaveDelaySecs = replCoord->getSlaveDelaySecs().total_seconds();
if (!ops.empty() && slaveDelaySecs > 0) {
const BSONObj& lastOp = ops.getDeque().back();
const unsigned int opTimestampSecs = lastOp["ts"]._opTime().getSecs();
// Stop the batch as the lastOp is too new to be applied. If we continue
// on, we can get ops that are way ahead of the delay and this will
// make this thread sleep longer when handleSlaveDelay is called
// and apply ops much sooner than we like.
if (opTimestampSecs > static_cast<unsigned int>(time(0) - slaveDelaySecs)) {
break;
}
}
// keep fetching more ops as long as we haven't filled up a full batch yet
} while (!tryPopAndWaitForMore(&ops, replCoord) && // tryPopAndWaitForMore returns true
// when we need to end a batch early
(ops.getSize() < replBatchLimitBytes) &&
!inShutdown());
// For pausing replication in tests
while (MONGO_FAIL_POINT(rsSyncApplyStop)) {
sleepmillis(0);
}
if (ops.empty()) {
continue;
}
const BSONObj& lastOp = ops.getDeque().back();
handleSlaveDelay(lastOp);
if (replCoord->getCurrentMemberState().primary() &&
!replCoord->isWaitingForApplierToDrain()) {
severe() << "attempting to replicate ops while primary";
fassertFailed(28527);
}
// Set minValid to the last op to be applied in this next batch.
// This will cause this node to go into RECOVERING state
// if we should crash and restart before updating the oplog
OpTime minValid = lastOp["ts"]._opTime();
setMinValid(&txn, minValid);
multiApply(ops.getDeque());
applyOpsToOplog(&ops.getDeque());
// If we're just testing (no manager), don't keep looping if we exhausted the bgqueue
// TODO(spencer): Remove repltest.cpp dbtest or make this work with the new replication
// coordinator
if (theReplSet && !theReplSet->mgr) {
BSONObj op;
if (!peek(&op)) {
return;
}
}
}
}
static void _logOpOld(OperationContext* txn,
const char *opstr,
const char *ns,
const char *logNS,
const BSONObj& obj,
BSONObj *o2,
bool *bb,
bool fromMigrate ) {
Lock::DBLock lk(txn->lockState(), "local", newlm::MODE_X);
WriteUnitOfWork wunit(txn);
static BufBuilder bufbuilder(8*1024); // todo there is likely a mutex on this constructor
if ( strncmp(ns, "local.", 6) == 0 ) {
if ( strncmp(ns, "local.slaves", 12) == 0 ) {
resetSlaveCache();
}
return;
}
mutex::scoped_lock lk2(newOpMutex);
OpTime ts(getNextGlobalOptime());
newOptimeNotifier.notify_all();
/* we jump through a bunch of hoops here to avoid copying the obj buffer twice --
instead we do a single copy to the destination position in the memory mapped file.
*/
bufbuilder.reset();
BSONObjBuilder b(bufbuilder);
b.appendTimestamp("ts", ts.asDate());
b.append("op", opstr);
b.append("ns", ns);
if (fromMigrate)
b.appendBool("fromMigrate", true);
if ( bb )
b.appendBool("b", *bb);
if ( o2 )
b.append("o2", *o2);
BSONObj partial = b.done(); // partial is everything except the o:... part.
if( logNS == 0 ) {
logNS = "local.oplog.$main";
}
if ( localOplogMainCollection == 0 ) {
Client::Context ctx(txn, logNS);
localDB = ctx.db();
verify( localDB );
localOplogMainCollection = localDB->getCollection(txn, logNS);
verify( localOplogMainCollection );
}
Client::Context ctx(txn, logNS , localDB);
OplogDocWriter writer( partial, obj );
checkOplogInsert( localOplogMainCollection->insertDocument( txn, &writer, false ) );
ctx.getClient()->setLastOp( ts );
ReplicationCoordinator* replCoord = getGlobalReplicationCoordinator();
replCoord->setMyLastOptime(txn, ts);
wunit.commit();
}
static void _logOpRS(OperationContext* txn,
const char *opstr,
const char *ns,
const char *logNS,
const BSONObj& obj,
BSONObj *o2,
bool *bb,
bool fromMigrate ) {
Lock::DBLock lk1(txn->lockState(), "local", newlm::MODE_X);
WriteUnitOfWork wunit(txn);
if ( strncmp(ns, "local.", 6) == 0 ) {
if ( strncmp(ns, "local.slaves", 12) == 0 )
resetSlaveCache();
return;
}
ReplicationCoordinator* replCoord = getGlobalReplicationCoordinator();
mutex::scoped_lock lk2(newOpMutex);
OpTime ts(getNextGlobalOptime());
newOptimeNotifier.notify_all();
long long hashNew = BackgroundSync::get()->getLastAppliedHash();
// Check to make sure logOp() is legal at this point.
if (*opstr == 'n') {
// 'n' operations are always logged
invariant(*ns == '\0');
// 'n' operations do not advance the hash, since they are not rolled back
}
else {
if (!replCoord->canAcceptWritesForDatabase(nsToDatabaseSubstring(ns))) {
severe() << "replSet error : logOp() but can't accept write to collection " << ns;
fassertFailed(17405);
}
// Advance the hash
hashNew = (hashNew * 131 + ts.asLL()) * 17 + replCoord->getMyId();
}
/* we jump through a bunch of hoops here to avoid copying the obj buffer twice --
instead we do a single copy to the destination position in the memory mapped file.
*/
logopbufbuilder.reset();
BSONObjBuilder b(logopbufbuilder);
b.appendTimestamp("ts", ts.asDate());
b.append("h", hashNew);
b.append("v", OPLOG_VERSION);
b.append("op", opstr);
b.append("ns", ns);
if (fromMigrate)
b.appendBool("fromMigrate", true);
if ( bb )
b.appendBool("b", *bb);
if ( o2 )
b.append("o2", *o2);
BSONObj partial = b.done();
DEV verify( logNS == 0 ); // check this was never a master/slave master
if ( localOplogRSCollection == 0 ) {
Client::Context ctx(txn, rsoplog);
localDB = ctx.db();
verify( localDB );
localOplogRSCollection = localDB->getCollection( txn, rsoplog );
massert(13347, "local.oplog.rs missing. did you drop it? if so restart server", localOplogRSCollection);
}
Client::Context ctx(txn, rsoplog, localDB);
OplogDocWriter writer( partial, obj );
checkOplogInsert( localOplogRSCollection->insertDocument( txn, &writer, false ) );
BackgroundSync::get()->setLastAppliedHash(hashNew);
ctx.getClient()->setLastOp( ts );
replCoord->setMyLastOptime(txn, ts);
wunit.commit();
}