int
PCA9685::ioctl(struct file *filp, int cmd, unsigned long arg)
{
int ret = -EINVAL;
switch (cmd) {
case MIXERIOCRESET:
if (_mixers != nullptr) {
delete _mixers;
_mixers = nullptr;
_groups_required = 0;
}
ret = OK;
break;
case MIXERIOCADDSIMPLE: {
mixer_simple_s *mixinfo = (mixer_simple_s *)arg;
SimpleMixer *mixer = new SimpleMixer(control_callback,
(uintptr_t)_controls, mixinfo);
if (mixer->check()) {
delete mixer;
_groups_required = 0;
ret = -EINVAL;
} else {
if (_mixers == nullptr)
_mixers = new MixerGroup(control_callback,
(uintptr_t)_controls);
_mixers->add_mixer(mixer);
_mixers->groups_required(_groups_required);
ret = OK;
}
break;
}
case MIXERIOCLOADBUF: {
const char *buf = (const char *)arg;
unsigned buflen = strnlen(buf, 1024);
if (_mixers == nullptr) {
_mixers = new MixerGroup(control_callback,
(uintptr_t)_controls);
}
if (_mixers == nullptr) {
_groups_required = 0;
ret = -ENOMEM;
} else {
ret = _mixers->load_from_buf(buf, buflen);
if (ret != 0) {
DEVICE_DEBUG("mixer load failed with %d", ret);
delete _mixers;
_mixers = nullptr;
_groups_required = 0;
ret = -EINVAL;
} else {
_mixers->groups_required(_groups_required);
ret = OK;
}
}
break;
}
case IOX_SET_MODE:
if (_mode != (IOX_MODE)arg) {
switch ((IOX_MODE)arg) {
case IOX_MODE_OFF:
warnx("shutting down");
break;
case IOX_MODE_ON:
warnx("starting");
break;
case IOX_MODE_TEST_OUT:
warnx("test starting");
break;
default:
return -1;
}
_mode = (IOX_MODE)arg;
}
// if not active, kick it
if (!_running) {
_running = true;
work_queue(LPWORK, &_work, (worker_t)&PCA9685::i2cpwm_trampoline, this, 1);
}
return OK;
default:
// see if the parent class can make any use of it
ret = CDev::ioctl(filp, cmd, arg);
break;
}
return ret;
}
int
PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg)
{
int ret = OK;
lock();
switch (cmd) {
case PWM_SERVO_ARM:
up_pwm_servo_arm(true);
break;
case PWM_SERVO_SET_ARM_OK:
case PWM_SERVO_CLEAR_ARM_OK:
case PWM_SERVO_SET_FORCE_SAFETY_OFF:
case PWM_SERVO_SET_FORCE_SAFETY_ON:
// these are no-ops, as no safety switch
break;
case PWM_SERVO_DISARM:
up_pwm_servo_arm(false);
break;
case PWM_SERVO_GET_DEFAULT_UPDATE_RATE:
*(uint32_t *)arg = _pwm_default_rate;
break;
case PWM_SERVO_SET_UPDATE_RATE:
ret = set_pwm_rate(_pwm_alt_rate_channels, _pwm_default_rate, arg);
break;
case PWM_SERVO_GET_UPDATE_RATE:
*(uint32_t *)arg = _pwm_alt_rate;
break;
case PWM_SERVO_SET_SELECT_UPDATE_RATE:
ret = set_pwm_rate(arg, _pwm_default_rate, _pwm_alt_rate);
break;
case PWM_SERVO_GET_SELECT_UPDATE_RATE:
*(uint32_t *)arg = _pwm_alt_rate_channels;
break;
case PWM_SERVO_SET_FAILSAFE_PWM: {
struct pwm_output_values *pwm = (struct pwm_output_values *)arg;
/* discard if too many values are sent */
if (pwm->channel_count > _max_actuators) {
ret = -EINVAL;
break;
}
for (unsigned i = 0; i < pwm->channel_count; i++) {
if (pwm->values[i] == 0) {
/* ignore 0 */
} else if (pwm->values[i] > PWM_HIGHEST_MAX) {
_failsafe_pwm[i] = PWM_HIGHEST_MAX;
} else if (pwm->values[i] < PWM_LOWEST_MIN) {
_failsafe_pwm[i] = PWM_LOWEST_MIN;
} else {
_failsafe_pwm[i] = pwm->values[i];
}
}
/*
* update the counter
* this is needed to decide if disarmed PWM output should be turned on or not
*/
_num_failsafe_set = 0;
for (unsigned i = 0; i < _max_actuators; i++) {
if (_failsafe_pwm[i] > 0)
_num_failsafe_set++;
}
break;
}
case PWM_SERVO_GET_FAILSAFE_PWM: {
struct pwm_output_values *pwm = (struct pwm_output_values *)arg;
for (unsigned i = 0; i < _max_actuators; i++) {
pwm->values[i] = _failsafe_pwm[i];
}
pwm->channel_count = _max_actuators;
break;
}
case PWM_SERVO_SET_DISARMED_PWM: {
struct pwm_output_values *pwm = (struct pwm_output_values *)arg;
/* discard if too many values are sent */
if (pwm->channel_count > _max_actuators) {
ret = -EINVAL;
break;
}
for (unsigned i = 0; i < pwm->channel_count; i++) {
if (pwm->values[i] == 0) {
/* ignore 0 */
} else if (pwm->values[i] > PWM_HIGHEST_MAX) {
_disarmed_pwm[i] = PWM_HIGHEST_MAX;
} else if (pwm->values[i] < PWM_LOWEST_MIN) {
_disarmed_pwm[i] = PWM_LOWEST_MIN;
} else {
_disarmed_pwm[i] = pwm->values[i];
}
}
/*
* update the counter
* this is needed to decide if disarmed PWM output should be turned on or not
*/
_num_disarmed_set = 0;
for (unsigned i = 0; i < _max_actuators; i++) {
if (_disarmed_pwm[i] > 0)
_num_disarmed_set++;
}
break;
}
case PWM_SERVO_GET_DISARMED_PWM: {
struct pwm_output_values *pwm = (struct pwm_output_values *)arg;
for (unsigned i = 0; i < _max_actuators; i++) {
pwm->values[i] = _disarmed_pwm[i];
}
pwm->channel_count = _max_actuators;
break;
}
case PWM_SERVO_SET_MIN_PWM: {
struct pwm_output_values *pwm = (struct pwm_output_values *)arg;
/* discard if too many values are sent */
if (pwm->channel_count > _max_actuators) {
ret = -EINVAL;
break;
}
for (unsigned i = 0; i < pwm->channel_count; i++) {
if (pwm->values[i] == 0) {
/* ignore 0 */
} else if (pwm->values[i] > PWM_HIGHEST_MIN) {
_min_pwm[i] = PWM_HIGHEST_MIN;
} else if (pwm->values[i] < PWM_LOWEST_MIN) {
_min_pwm[i] = PWM_LOWEST_MIN;
} else {
_min_pwm[i] = pwm->values[i];
}
}
break;
}
case PWM_SERVO_GET_MIN_PWM: {
struct pwm_output_values *pwm = (struct pwm_output_values *)arg;
for (unsigned i = 0; i < _max_actuators; i++) {
pwm->values[i] = _min_pwm[i];
}
pwm->channel_count = _max_actuators;
arg = (unsigned long)&pwm;
break;
}
case PWM_SERVO_SET_MAX_PWM: {
struct pwm_output_values *pwm = (struct pwm_output_values *)arg;
/* discard if too many values are sent */
if (pwm->channel_count > _max_actuators) {
ret = -EINVAL;
break;
}
for (unsigned i = 0; i < pwm->channel_count; i++) {
if (pwm->values[i] == 0) {
/* ignore 0 */
} else if (pwm->values[i] < PWM_LOWEST_MAX) {
_max_pwm[i] = PWM_LOWEST_MAX;
} else if (pwm->values[i] > PWM_HIGHEST_MAX) {
_max_pwm[i] = PWM_HIGHEST_MAX;
} else {
_max_pwm[i] = pwm->values[i];
}
}
break;
}
case PWM_SERVO_GET_MAX_PWM: {
struct pwm_output_values *pwm = (struct pwm_output_values *)arg;
for (unsigned i = 0; i < _max_actuators; i++) {
pwm->values[i] = _max_pwm[i];
}
pwm->channel_count = _max_actuators;
arg = (unsigned long)&pwm;
break;
}
#ifdef CONFIG_ARCH_BOARD_AEROCORE
case PWM_SERVO_SET(7):
case PWM_SERVO_SET(6):
if (_mode < MODE_8PWM) {
ret = -EINVAL;
break;
}
#endif
case PWM_SERVO_SET(5):
case PWM_SERVO_SET(4):
if (_mode < MODE_6PWM) {
ret = -EINVAL;
break;
}
/* FALLTHROUGH */
case PWM_SERVO_SET(3):
case PWM_SERVO_SET(2):
if (_mode < MODE_4PWM) {
ret = -EINVAL;
break;
}
/* FALLTHROUGH */
case PWM_SERVO_SET(1):
case PWM_SERVO_SET(0):
if (arg <= 2100) {
up_pwm_servo_set(cmd - PWM_SERVO_SET(0), arg);
} else {
ret = -EINVAL;
}
break;
#ifdef CONFIG_ARCH_BOARD_AEROCORE
case PWM_SERVO_GET(7):
case PWM_SERVO_GET(6):
if (_mode < MODE_8PWM) {
ret = -EINVAL;
break;
}
#endif
case PWM_SERVO_GET(5):
case PWM_SERVO_GET(4):
if (_mode < MODE_6PWM) {
ret = -EINVAL;
break;
}
/* FALLTHROUGH */
case PWM_SERVO_GET(3):
case PWM_SERVO_GET(2):
if (_mode < MODE_4PWM) {
ret = -EINVAL;
break;
}
/* FALLTHROUGH */
case PWM_SERVO_GET(1):
case PWM_SERVO_GET(0):
*(servo_position_t *)arg = up_pwm_servo_get(cmd - PWM_SERVO_GET(0));
break;
case PWM_SERVO_GET_RATEGROUP(0):
case PWM_SERVO_GET_RATEGROUP(1):
case PWM_SERVO_GET_RATEGROUP(2):
case PWM_SERVO_GET_RATEGROUP(3):
case PWM_SERVO_GET_RATEGROUP(4):
case PWM_SERVO_GET_RATEGROUP(5):
#ifdef CONFIG_ARCH_BOARD_AEROCORE
case PWM_SERVO_GET_RATEGROUP(6):
case PWM_SERVO_GET_RATEGROUP(7):
#endif
*(uint32_t *)arg = up_pwm_servo_get_rate_group(cmd - PWM_SERVO_GET_RATEGROUP(0));
break;
case PWM_SERVO_GET_COUNT:
case MIXERIOCGETOUTPUTCOUNT:
switch (_mode) {
#ifdef CONFIG_ARCH_BOARD_AEROCORE
case MODE_8PWM:
*(unsigned *)arg = 8;
break;
#endif
case MODE_6PWM:
*(unsigned *)arg = 6;
break;
case MODE_4PWM:
*(unsigned *)arg = 4;
break;
case MODE_2PWM:
*(unsigned *)arg = 2;
break;
default:
ret = -EINVAL;
break;
}
break;
case PWM_SERVO_SET_COUNT: {
/* change the number of outputs that are enabled for
* PWM. This is used to change the split between GPIO
* and PWM under control of the flight config
* parameters. Note that this does not allow for
* changing a set of pins to be used for serial on
* FMUv1
*/
switch (arg) {
case 0:
set_mode(MODE_NONE);
break;
case 2:
set_mode(MODE_2PWM);
break;
case 4:
set_mode(MODE_4PWM);
break;
#if defined(CONFIG_ARCH_BOARD_PX4FMU_V2)
case 6:
set_mode(MODE_6PWM);
break;
#endif
#if defined(CONFIG_ARCH_BOARD_AEROCORE)
case 8:
set_mode(MODE_8PWM);
break;
#endif
default:
ret = -EINVAL;
break;
}
break;
}
case MIXERIOCRESET:
if (_mixers != nullptr) {
delete _mixers;
_mixers = nullptr;
_groups_required = 0;
}
break;
case MIXERIOCADDSIMPLE: {
mixer_simple_s *mixinfo = (mixer_simple_s *)arg;
SimpleMixer *mixer = new SimpleMixer(control_callback,
(uintptr_t)_controls, mixinfo);
if (mixer->check()) {
delete mixer;
_groups_required = 0;
ret = -EINVAL;
} else {
if (_mixers == nullptr)
_mixers = new MixerGroup(control_callback,
(uintptr_t)_controls);
_mixers->add_mixer(mixer);
_mixers->groups_required(_groups_required);
}
break;
}
case MIXERIOCLOADBUF: {
const char *buf = (const char *)arg;
unsigned buflen = strnlen(buf, 1024);
if (_mixers == nullptr)
_mixers = new MixerGroup(control_callback, (uintptr_t)_controls);
if (_mixers == nullptr) {
_groups_required = 0;
ret = -ENOMEM;
} else {
ret = _mixers->load_from_buf(buf, buflen);
if (ret != 0) {
debug("mixer load failed with %d", ret);
delete _mixers;
_mixers = nullptr;
_groups_required = 0;
ret = -EINVAL;
} else {
_mixers->groups_required(_groups_required);
}
}
break;
}
default:
ret = -ENOTTY;
break;
}
unlock();
return ret;
}
int
FMUServo::ioctl(struct file *filp, int cmd, unsigned long arg)
{
int ret = OK;
int channel;
switch (cmd) {
case PWM_SERVO_ARM:
up_pwm_servo_arm(true);
break;
case PWM_SERVO_DISARM:
up_pwm_servo_arm(false);
break;
case PWM_SERVO_SET(2):
case PWM_SERVO_SET(3):
if (_mode != MODE_4PWM) {
ret = -EINVAL;
break;
}
/* FALLTHROUGH */
case PWM_SERVO_SET(0):
case PWM_SERVO_SET(1):
if (arg < 2100) {
channel = cmd - PWM_SERVO_SET(0);
up_pwm_servo_set(channel, arg);
} else {
ret = -EINVAL;
}
break;
case PWM_SERVO_GET(2):
case PWM_SERVO_GET(3):
if (_mode != MODE_4PWM) {
ret = -EINVAL;
break;
}
/* FALLTHROUGH */
case PWM_SERVO_GET(0):
case PWM_SERVO_GET(1): {
channel = cmd - PWM_SERVO_SET(0);
*(servo_position_t *)arg = up_pwm_servo_get(channel);
break;
}
case MIXERIOCGETOUTPUTCOUNT:
if (_mode == MODE_4PWM) {
*(unsigned *)arg = 4;
} else {
*(unsigned *)arg = 2;
}
break;
case MIXERIOCRESET:
if (_mixers != nullptr) {
delete _mixers;
_mixers = nullptr;
}
break;
case MIXERIOCADDSIMPLE: {
mixer_simple_s *mixinfo = (mixer_simple_s *)arg;
SimpleMixer *mixer = new SimpleMixer(control_callback_trampoline, (uintptr_t)this, mixinfo);
if (mixer->check()) {
delete mixer;
ret = -EINVAL;
} else {
if (_mixers == nullptr)
_mixers = new MixerGroup(control_callback_trampoline, (uintptr_t)this);
_mixers->add_mixer(mixer);
}
break;
}
case MIXERIOCADDMULTIROTOR:
/* XXX not yet supported */
ret = -ENOTTY;
break;
case MIXERIOCLOADFILE: {
const char *path = (const char *)arg;
if (_mixers != nullptr) {
delete _mixers;
_mixers = nullptr;
}
_mixers = new MixerGroup(control_callback_trampoline, (uintptr_t)this);
if (_mixers->load_from_file(path) != 0) {
delete _mixers;
_mixers = nullptr;
ret = -EINVAL;
}
break;
}
default:
ret = -ENOTTY;
break;
}
return ret;
}
