void SkSVGDevice::AutoElement::addClipResources(const SkDraw& draw, Resources* resources) {
SkASSERT(!draw.fClipStack->isWideOpen());
SkPath clipPath;
(void) draw.fClipStack->asPath(&clipPath);
SkString clipID = fResourceBucket->addClip();
const char* clipRule = clipPath.getFillType() == SkPath::kEvenOdd_FillType ?
"evenodd" : "nonzero";
{
// clipPath is in device space, but since we're only pushing transform attributes
// to the leaf nodes, so are all our elements => SVG userSpaceOnUse == device space.
AutoElement clipPathElement("clipPath", fWriter);
clipPathElement.addAttribute("id", clipID);
SkRect clipRect = SkRect::MakeEmpty();
if (clipPath.isEmpty() || clipPath.isRect(&clipRect)) {
AutoElement rectElement("rect", fWriter);
rectElement.addRectAttributes(clipRect);
rectElement.addAttribute("clip-rule", clipRule);
} else {
AutoElement pathElement("path", fWriter);
pathElement.addPathAttributes(clipPath);
pathElement.addAttribute("clip-rule", clipRule);
}
}
resources->fClip.printf("url(#%s)", clipID.c_str());
}
sk_sp<SkPathEffect> SkPath1DPathEffect::Make(const SkPath& path, SkScalar advance, SkScalar phase,
Style style) {
if (advance <= 0 || path.isEmpty()) {
return nullptr;
}
return sk_sp<SkPathEffect>(new SkPath1DPathEffect(path, advance, phase, style));
}
void makePath() {
if (fPath.isEmpty()) {
const SkScalar radius = SkIntToScalar(45);
fPath.addCircle(SkIntToScalar(50), SkIntToScalar(50), radius);
fPath.addCircle(SkIntToScalar(100), SkIntToScalar(100), radius);
}
}
GrGLPath::GrGLPath(GrGpuGL* gpu, const SkPath& path) : INHERITED(gpu, kIsWrapped) {
#ifndef SK_SCALAR_IS_FLOAT
GrCrash("Assumes scalar is float.");
#endif
SkASSERT(!path.isEmpty());
GL_CALL_RET(fPathID, GenPaths(1));
SkSTArray<16, GrGLubyte, true> pathCommands;
SkSTArray<16, SkPoint, true> pathPoints;
int verbCnt = path.countVerbs();
int pointCnt = path.countPoints();
pathCommands.resize_back(verbCnt);
pathPoints.resize_back(pointCnt);
// TODO: Direct access to path points since we could pass them on directly.
path.getPoints(&pathPoints[0], pointCnt);
path.getVerbs(&pathCommands[0], verbCnt);
GR_DEBUGCODE(int numPts = 0);
for (int i = 0; i < verbCnt; ++i) {
SkPath::Verb v = static_cast<SkPath::Verb>(pathCommands[i]);
pathCommands[i] = verb_to_gl_path_cmd(v);
GR_DEBUGCODE(numPts += num_pts(v));
}
GrAssert(pathPoints.count() == numPts);
GL_CALL(PathCommands(fPathID,
verbCnt, &pathCommands[0],
2 * pointCnt, GR_GL_FLOAT, &pathPoints[0]));
fBounds = path.getBounds();
}
static void failOne(skiatest::Reporter* reporter, int index) {
SkPath path;
int i = (int) (index % nonFinitePtsCount);
int f = (int) (index % finitePtsCount);
int g = (int) ((f + 1) % finitePtsCount);
switch (index % 13) {
case 0: path.lineTo(nonFinitePts[i]); break;
case 1: path.quadTo(nonFinitePts[i], nonFinitePts[i]); break;
case 2: path.quadTo(nonFinitePts[i], finitePts[f]); break;
case 3: path.quadTo(finitePts[f], nonFinitePts[i]); break;
case 4: path.cubicTo(nonFinitePts[i], finitePts[f], finitePts[f]); break;
case 5: path.cubicTo(finitePts[f], nonFinitePts[i], finitePts[f]); break;
case 6: path.cubicTo(finitePts[f], finitePts[f], nonFinitePts[i]); break;
case 7: path.cubicTo(nonFinitePts[i], nonFinitePts[i], finitePts[f]); break;
case 8: path.cubicTo(nonFinitePts[i], finitePts[f], nonFinitePts[i]); break;
case 9: path.cubicTo(finitePts[f], nonFinitePts[i], nonFinitePts[i]); break;
case 10: path.cubicTo(nonFinitePts[i], nonFinitePts[i], nonFinitePts[i]); break;
case 11: path.cubicTo(nonFinitePts[i], finitePts[f], finitePts[g]); break;
case 12: path.moveTo(nonFinitePts[i]); break;
}
SkPath result;
result.setFillType(SkPath::kWinding_FillType);
bool success = Simplify(path, &result);
REPORTER_ASSERT(reporter, !success);
REPORTER_ASSERT(reporter, result.isEmpty());
REPORTER_ASSERT(reporter, result.getFillType() == SkPath::kWinding_FillType);
reporter->bumpTestCount();
}
bool GrAAConvexPathRenderer::onDrawPath(GrDrawTarget* target,
GrPipelineBuilder* pipelineBuilder,
GrColor color,
const SkMatrix& vm,
const SkPath& path,
const SkStrokeRec&,
bool antiAlias) {
if (path.isEmpty()) {
return true;
}
// We outset our vertices one pixel and add one more pixel for precision.
// TODO create tighter bounds when we start reordering.
SkRect devRect = path.getBounds();
vm.mapRect(&devRect);
devRect.outset(2, 2);
AAConvexPathBatch::Geometry geometry;
geometry.fColor = color;
geometry.fViewMatrix = vm;
geometry.fPath = path;
SkAutoTUnref<GrBatch> batch(AAConvexPathBatch::Create(geometry));
target->drawBatch(pipelineBuilder, batch, &devRect);
return true;
}
SkPath1DPathEffect::SkPath1DPathEffect(const SkPath& path, SkScalar advance,
SkScalar phase, Style style) : fPath(path)
{
SkASSERT(advance > 0 && !path.isEmpty());
// cleanup their phase parameter, inverting it so that it becomes an
// offset along the path (to match the interpretation in PostScript)
if (phase < 0) {
phase = -phase;
if (phase > advance) {
phase = SkScalarMod(phase, advance);
}
} else {
if (phase > advance) {
phase = SkScalarMod(phase, advance);
}
phase = advance - phase;
}
// now catch the edge case where phase == advance (within epsilon)
if (phase >= advance) {
phase = 0;
}
SkASSERT(phase >= 0);
fAdvance = advance;
fInitialOffset = phase;
if ((unsigned)style > kMorph_Style) {
SkDEBUGF(("SkPath1DPathEffect style enum out of range %d\n", style));
}
fStyle = style;
}
GrGLPath::GrGLPath(GrGLGpu* gpu, const SkPath& origSkPath, const GrStrokeInfo& origStroke)
: INHERITED(gpu, origSkPath, origStroke),
fPathID(gpu->glPathRendering()->genPaths(1)) {
if (origSkPath.isEmpty()) {
InitPathObjectEmptyPath(gpu, fPathID);
fShouldStroke = false;
fShouldFill = false;
} else {
const SkPath* skPath = &origSkPath;
SkTLazy<SkPath> tmpPath;
const GrStrokeInfo* stroke = &origStroke;
GrStrokeInfo tmpStroke(SkStrokeRec::kFill_InitStyle);
if (stroke->isDashed()) {
// Skia stroking and NVPR stroking differ with respect to dashing
// pattern.
// Convert a dashing to either a stroke or a fill.
if (stroke->applyDashToPath(tmpPath.init(), &tmpStroke, *skPath)) {
skPath = tmpPath.get();
stroke = &tmpStroke;
}
}
bool didInit = false;
if (stroke->needToApply() && stroke->getCap() != SkPaint::kButt_Cap) {
// Skia stroking and NVPR stroking differ with respect to stroking
// end caps of empty subpaths.
// Convert stroke to fill if path contains empty subpaths.
didInit = InitPathObjectPathDataCheckingDegenerates(gpu, fPathID, *skPath);
if (!didInit) {
if (!tmpPath.isValid()) {
tmpPath.init();
}
SkAssertResult(stroke->applyToPath(tmpPath.get(), *skPath));
skPath = tmpPath.get();
tmpStroke.setFillStyle();
stroke = &tmpStroke;
}
}
if (!didInit) {
InitPathObjectPathData(gpu, fPathID, *skPath);
}
fShouldStroke = stroke->needToApply();
fShouldFill = stroke->isFillStyle() ||
stroke->getStyle() == SkStrokeRec::kStrokeAndFill_Style;
if (fShouldStroke) {
InitPathObjectStroke(gpu, fPathID, *stroke);
// FIXME: try to account for stroking, without rasterizing the stroke.
fBounds.outset(stroke->getWidth(), stroke->getWidth());
}
}
this->registerWithCache();
}
bool SkHitTestPath(const SkPath& path, SkRect& target, bool hires) {
if (target.isEmpty()) {
return false;
}
bool isInverse = path.isInverseFillType();
if (path.isEmpty()) {
return isInverse;
}
SkRect bounds = path.getBounds();
bool sects = SkRect::Intersects(target, bounds);
if (isInverse) {
if (!sects) {
return true;
}
} else {
if (!sects) {
return false;
}
if (target.contains(bounds)) {
return true;
}
}
SkPath devPath;
const SkPath* pathPtr;
SkRect devTarget;
if (hires) {
const SkScalar coordLimit = SkIntToScalar(16384);
const SkRect limit = { 0, 0, coordLimit, coordLimit };
SkMatrix matrix;
matrix.setRectToRect(bounds, limit, SkMatrix::kFill_ScaleToFit);
path.transform(matrix, &devPath);
matrix.mapRect(&devTarget, target);
pathPtr = &devPath;
} else {
devTarget = target;
pathPtr = &path;
}
SkIRect iTarget;
devTarget.round(&iTarget);
if (iTarget.isEmpty()) {
iTarget.fLeft = SkScalarFloorToInt(devTarget.fLeft);
iTarget.fTop = SkScalarFloorToInt(devTarget.fTop);
iTarget.fRight = iTarget.fLeft + 1;
iTarget.fBottom = iTarget.fTop + 1;
}
SkRegion clip(iTarget);
SkRegion rgn;
return rgn.setPath(*pathPtr, clip) ^ isInverse;
}
static void PathOpsSimplifyFailTest(skiatest::Reporter* reporter) {
for (int index = 0; index < (int) (13 * nonFinitePtsCount * finitePtsCount); ++index) {
SkPath path;
int i = (int) (index % nonFinitePtsCount);
int f = (int) (index % finitePtsCount);
int g = (int) ((f + 1) % finitePtsCount);
switch (index % 13) {
case 0: path.lineTo(nonFinitePts[i]); break;
case 1: path.quadTo(nonFinitePts[i], nonFinitePts[i]); break;
case 2: path.quadTo(nonFinitePts[i], finitePts[f]); break;
case 3: path.quadTo(finitePts[f], nonFinitePts[i]); break;
case 4: path.cubicTo(nonFinitePts[i], finitePts[f], finitePts[f]); break;
case 5: path.cubicTo(finitePts[f], nonFinitePts[i], finitePts[f]); break;
case 6: path.cubicTo(finitePts[f], finitePts[f], nonFinitePts[i]); break;
case 7: path.cubicTo(nonFinitePts[i], nonFinitePts[i], finitePts[f]); break;
case 8: path.cubicTo(nonFinitePts[i], finitePts[f], nonFinitePts[i]); break;
case 9: path.cubicTo(finitePts[f], nonFinitePts[i], nonFinitePts[i]); break;
case 10: path.cubicTo(nonFinitePts[i], nonFinitePts[i], nonFinitePts[i]); break;
case 11: path.cubicTo(nonFinitePts[i], finitePts[f], finitePts[g]); break;
case 12: path.moveTo(nonFinitePts[i]); break;
}
SkPath result;
result.setFillType(SkPath::kWinding_FillType);
bool success = Simplify(path, &result);
REPORTER_ASSERT(reporter, !success);
REPORTER_ASSERT(reporter, result.isEmpty());
REPORTER_ASSERT(reporter, result.getFillType() == SkPath::kWinding_FillType);
reporter->bumpTestCount();
}
if (sizeof(reporter) == 4) {
return;
}
for (int index = 0; index < (int) (11 * finitePtsCount); ++index) {
SkPath path;
int f = (int) (index % finitePtsCount);
int g = (int) ((f + 1) % finitePtsCount);
switch (index % 11) {
case 0: path.lineTo(finitePts[f]); break;
case 1: path.quadTo(finitePts[f], finitePts[f]); break;
case 2: path.quadTo(finitePts[f], finitePts[g]); break;
case 3: path.quadTo(finitePts[g], finitePts[f]); break;
case 4: path.cubicTo(finitePts[f], finitePts[f], finitePts[f]); break;
case 5: path.cubicTo(finitePts[f], finitePts[f], finitePts[g]); break;
case 6: path.cubicTo(finitePts[f], finitePts[g], finitePts[f]); break;
case 7: path.cubicTo(finitePts[f], finitePts[g], finitePts[g]); break;
case 8: path.cubicTo(finitePts[g], finitePts[f], finitePts[f]); break;
case 9: path.cubicTo(finitePts[g], finitePts[f], finitePts[g]); break;
case 10: path.moveTo(finitePts[f]); break;
}
SkPath result;
result.setFillType(SkPath::kWinding_FillType);
bool success = Simplify(path, &result);
REPORTER_ASSERT(reporter, success);
REPORTER_ASSERT(reporter, result.getFillType() != SkPath::kWinding_FillType);
reporter->bumpTestCount();
}
}
static void toString(const SkPath& path, SkString* str) {
if (path.isEmpty()) {
str->append("path:empty");
} else {
toString(path.getBounds(), str);
#if 1
SkString s;
dumpVerbs(path, &s);
str->append(s.c_str());
#endif
str->append("]");
str->prepend("path:[");
}
}
// http://crbug.com/165432
// Limit extreme dash path effects to avoid exhausting the system memory.
static void test_crbug_165432(skiatest::Reporter* reporter) {
SkPath path;
path.moveTo(0, 0);
path.lineTo(10000000, 0);
SkScalar intervals[] = { 0.5f, 0.5f };
SkDashPathEffect dash(intervals, 2, 0);
SkPaint paint;
paint.setStyle(SkPaint::kStroke_Style);
paint.setPathEffect(&dash);
SkPath filteredPath;
SkStrokeRec rec(paint);
REPORTER_ASSERT(reporter, !dash.filterPath(&filteredPath, path, &rec, NULL));
REPORTER_ASSERT(reporter, filteredPath.isEmpty());
}
bool SkHitTestPathEx(const SkPath& path, SkScalar x, SkScalar y) {
bool isInverse = path.isInverseFillType();
if (path.isEmpty()) {
return isInverse;
}
const SkRect& bounds = path.getBounds();
if (!bounds.contains(x, y)) {
return isInverse;
}
SkPath::Iter iter(path, true);
bool done = false;
int w = 0;
do {
SkPoint pts[4];
switch (iter.next(pts, false)) {
case SkPath::kMove_Verb:
case SkPath::kClose_Verb:
break;
case SkPath::kLine_Verb:
w += winding_line(pts, x, y);
break;
case SkPath::kQuad_Verb:
w += winding_quad(pts, x, y);
break;
case SkPath::kCubic_Verb:
w += winding_cubic(pts, x, y);
break;
case SkPath::kDone_Verb:
done = true;
break;
}
} while (!done);
switch (path.getFillType()) {
case SkPath::kEvenOdd_FillType:
case SkPath::kInverseEvenOdd_FillType:
w &= 1;
break;
default:
break;
}
return SkToBool(w);
}
void GrGLPath::InitPathObjectPathData(GrGLGpu* gpu,
GrGLuint pathID,
const SkPath& skPath) {
SkASSERT(!skPath.isEmpty());
#ifdef SK_SCALAR_IS_FLOAT
// This branch does type punning, converting SkPoint* to GrGLfloat*.
if ((skPath.getSegmentMasks() & SkPath::kConic_SegmentMask) == 0) {
int verbCnt = skPath.countVerbs();
int pointCnt = skPath.countPoints();
int coordCnt = pointCnt * 2;
SkSTArray<16, GrGLubyte, true> pathCommands(verbCnt);
SkSTArray<16, GrGLfloat, true> pathCoords(coordCnt);
static_assert(sizeof(SkPoint) == sizeof(GrGLfloat) * 2, "sk_point_not_two_floats");
pathCommands.resize_back(verbCnt);
pathCoords.resize_back(coordCnt);
skPath.getPoints(reinterpret_cast<SkPoint*>(&pathCoords[0]), pointCnt);
skPath.getVerbs(&pathCommands[0], verbCnt);
SkDEBUGCODE(int verbCoordCnt = 0);
for (int i = 0; i < verbCnt; ++i) {
SkPath::Verb v = static_cast<SkPath::Verb>(pathCommands[i]);
pathCommands[i] = verb_to_gl_path_cmd(v);
SkDEBUGCODE(verbCoordCnt += num_coords(v));
}
SkASSERT(verbCnt == pathCommands.count());
SkASSERT(verbCoordCnt == pathCoords.count());
SkDEBUGCODE(verify_floats(&pathCoords[0], pathCoords.count()));
GR_GL_CALL(gpu->glInterface(), PathCommands(pathID, pathCommands.count(), &pathCommands[0],
pathCoords.count(), GR_GL_FLOAT,
&pathCoords[0]));
return;
}
#endif
SkAssertResult(init_path_object_for_general_path<false>(gpu, pathID, skPath));
}
bool GrAALinearizingConvexPathRenderer::onDrawPath(GrDrawTarget* target,
GrPipelineBuilder* pipelineBuilder,
GrColor color,
const SkMatrix& vm,
const SkPath& path,
const GrStrokeInfo& stroke,
bool antiAlias) {
if (path.isEmpty()) {
return true;
}
AAFlatteningConvexPathBatch::Geometry geometry;
geometry.fColor = color;
geometry.fViewMatrix = vm;
geometry.fPath = path;
geometry.fStrokeWidth = stroke.isFillStyle() ? -1.0f : stroke.getWidth();
geometry.fJoin = stroke.isFillStyle() ? SkPaint::Join::kMiter_Join : stroke.getJoin();
geometry.fMiterLimit = stroke.getMiter();
SkAutoTUnref<GrBatch> batch(AAFlatteningConvexPathBatch::Create(geometry));
target->drawBatch(pipelineBuilder, batch);
return true;
}
DEF_TEST(PathOpsBuilder, reporter) {
SkOpBuilder builder;
SkPath result;
REPORTER_ASSERT(reporter, builder.resolve(&result));
REPORTER_ASSERT(reporter, result.isEmpty());
builder.add(result, kDifference_SkPathOp);
REPORTER_ASSERT(reporter, builder.resolve(&result));
REPORTER_ASSERT(reporter, result.isEmpty());
builder.add(result, kUnion_SkPathOp);
REPORTER_ASSERT(reporter, builder.resolve(&result));
REPORTER_ASSERT(reporter, result.isEmpty());
SkPath rectPath;
rectPath.setFillType(SkPath::kEvenOdd_FillType);
rectPath.addRect(0, 1, 2, 3, SkPath::kCW_Direction);
builder.add(rectPath, kUnion_SkPathOp);
REPORTER_ASSERT(reporter, builder.resolve(&result));
bool closed;
SkPath::Direction dir;
REPORTER_ASSERT(reporter, result.isRect(nullptr, &closed, &dir));
REPORTER_ASSERT(reporter, closed);
REPORTER_ASSERT(reporter, dir == SkPath::kCCW_Direction);
int pixelDiff = comparePaths(reporter, __FUNCTION__, rectPath, result);
REPORTER_ASSERT(reporter, pixelDiff == 0);
rectPath.reset();
rectPath.setFillType(SkPath::kEvenOdd_FillType);
rectPath.addRect(0, 1, 2, 3, SkPath::kCCW_Direction);
builder.add(rectPath, kUnion_SkPathOp);
REPORTER_ASSERT(reporter, builder.resolve(&result));
REPORTER_ASSERT(reporter, result.isRect(nullptr, &closed, &dir));
REPORTER_ASSERT(reporter, closed);
REPORTER_ASSERT(reporter, dir == SkPath::kCCW_Direction);
REPORTER_ASSERT(reporter, rectPath == result);
builder.add(rectPath, kDifference_SkPathOp);
REPORTER_ASSERT(reporter, builder.resolve(&result));
REPORTER_ASSERT(reporter, result.isEmpty());
SkPath rect2, rect3;
rect2.addRect(2, 1, 4, 3, SkPath::kCW_Direction);
rect3.addRect(4, 1, 5, 3, SkPath::kCCW_Direction);
builder.add(rectPath, kUnion_SkPathOp);
builder.add(rect2, kUnion_SkPathOp);
builder.add(rect3, kUnion_SkPathOp);
REPORTER_ASSERT(reporter, builder.resolve(&result));
REPORTER_ASSERT(reporter, result.isRect(nullptr, &closed, &dir));
REPORTER_ASSERT(reporter, closed);
SkRect expected;
expected.set(0, 1, 5, 3);
REPORTER_ASSERT(reporter, result.getBounds() == expected);
SkPath circle1, circle2, circle3;
circle1.addCircle(5, 6, 4, SkPath::kCW_Direction);
circle2.addCircle(7, 4, 8, SkPath::kCCW_Direction);
circle3.addCircle(6, 5, 6, SkPath::kCW_Direction);
SkPath opCompare;
Op(circle1, circle2, kUnion_SkPathOp, &opCompare);
Op(opCompare, circle3, kDifference_SkPathOp, &opCompare);
builder.add(circle1, kUnion_SkPathOp);
builder.add(circle2, kUnion_SkPathOp);
builder.add(circle3, kDifference_SkPathOp);
REPORTER_ASSERT(reporter, builder.resolve(&result));
pixelDiff = comparePaths(reporter, __FUNCTION__, opCompare, result);
REPORTER_ASSERT(reporter, pixelDiff == 0);
}
////////////////////////////////////////////////////////////////////////////////
// Create a 1-bit clip mask in the stencil buffer. 'devClipBounds' are in device
// (as opposed to canvas) coordinates
bool GrClipMaskManager::createStencilClipMask(int32_t elementsGenID,
InitialState initialState,
const ElementList& elements,
const SkIRect& clipSpaceIBounds,
const SkIPoint& clipSpaceToStencilOffset) {
SkASSERT(kNone_ClipMaskType == fCurrClipMaskType);
GrDrawState* drawState = fGpu->drawState();
SkASSERT(drawState->isClipState());
GrRenderTarget* rt = drawState->getRenderTarget();
SkASSERT(NULL != rt);
// TODO: dynamically attach a SB when needed.
GrStencilBuffer* stencilBuffer = rt->getStencilBuffer();
if (NULL == stencilBuffer) {
return false;
}
if (stencilBuffer->mustRenderClip(elementsGenID, clipSpaceIBounds, clipSpaceToStencilOffset)) {
stencilBuffer->setLastClip(elementsGenID, clipSpaceIBounds, clipSpaceToStencilOffset);
// Set the matrix so that rendered clip elements are transformed from clip to stencil space.
SkVector translate = {
SkIntToScalar(clipSpaceToStencilOffset.fX),
SkIntToScalar(clipSpaceToStencilOffset.fY)
};
SkMatrix matrix;
matrix.setTranslate(translate);
GrDrawTarget::AutoGeometryAndStatePush agasp(fGpu, GrDrawTarget::kReset_ASRInit, &matrix);
drawState = fGpu->drawState();
drawState->setRenderTarget(rt);
// We set the current clip to the bounds so that our recursive draws are scissored to them.
SkIRect stencilSpaceIBounds(clipSpaceIBounds);
stencilSpaceIBounds.offset(clipSpaceToStencilOffset);
GrDrawTarget::AutoClipRestore acr(fGpu, stencilSpaceIBounds);
drawState->enableState(GrDrawState::kClip_StateBit);
#if !VISUALIZE_COMPLEX_CLIP
drawState->enableState(GrDrawState::kNoColorWrites_StateBit);
#endif
int clipBit = stencilBuffer->bits();
SkASSERT((clipBit <= 16) && "Ganesh only handles 16b or smaller stencil buffers");
clipBit = (1 << (clipBit-1));
fGpu->clearStencilClip(stencilSpaceIBounds, kAllIn_InitialState == initialState);
// walk through each clip element and perform its set op
// with the existing clip.
for (ElementList::Iter iter(elements.headIter()); NULL != iter.get(); iter.next()) {
const Element* element = iter.get();
bool fillInverted = false;
// enabled at bottom of loop
drawState->disableState(GrGpu::kModifyStencilClip_StateBit);
// if the target is MSAA then we want MSAA enabled when the clip is soft
if (rt->isMultisampled()) {
drawState->setState(GrDrawState::kHWAntialias_StateBit, element->isAA());
}
// This will be used to determine whether the clip shape can be rendered into the
// stencil with arbitrary stencil settings.
GrPathRenderer::StencilSupport stencilSupport;
SkStrokeRec stroke(SkStrokeRec::kFill_InitStyle);
SkRegion::Op op = element->getOp();
GrPathRenderer* pr = NULL;
SkPath clipPath;
if (Element::kRect_Type == element->getType()) {
stencilSupport = GrPathRenderer::kNoRestriction_StencilSupport;
fillInverted = false;
} else {
element->asPath(&clipPath);
fillInverted = clipPath.isInverseFillType();
if (fillInverted) {
clipPath.toggleInverseFillType();
}
pr = this->getContext()->getPathRenderer(clipPath,
stroke,
fGpu,
false,
GrPathRendererChain::kStencilOnly_DrawType,
&stencilSupport);
if (NULL == pr) {
return false;
}
}
int passes;
GrStencilSettings stencilSettings[GrStencilSettings::kMaxStencilClipPasses];
bool canRenderDirectToStencil =
GrPathRenderer::kNoRestriction_StencilSupport == stencilSupport;
bool canDrawDirectToClip; // Given the renderer, the element,
// fill rule, and set operation can
// we render the element directly to
// stencil bit used for clipping.
canDrawDirectToClip = GrStencilSettings::GetClipPasses(op,
canRenderDirectToStencil,
clipBit,
fillInverted,
&passes,
stencilSettings);
// draw the element to the client stencil bits if necessary
if (!canDrawDirectToClip) {
GR_STATIC_CONST_SAME_STENCIL(gDrawToStencil,
kIncClamp_StencilOp,
kIncClamp_StencilOp,
kAlways_StencilFunc,
0xffff,
0x0000,
0xffff);
SET_RANDOM_COLOR
if (Element::kRect_Type == element->getType()) {
*drawState->stencil() = gDrawToStencil;
fGpu->drawSimpleRect(element->getRect(), NULL);
} else {
if (!clipPath.isEmpty()) {
if (canRenderDirectToStencil) {
*drawState->stencil() = gDrawToStencil;
pr->drawPath(clipPath, stroke, fGpu, false);
} else {
pr->stencilPath(clipPath, stroke, fGpu);
}
}
}
}
// now we modify the clip bit by rendering either the clip
// element directly or a bounding rect of the entire clip.
drawState->enableState(GrGpu::kModifyStencilClip_StateBit);
for (int p = 0; p < passes; ++p) {
*drawState->stencil() = stencilSettings[p];
if (canDrawDirectToClip) {
if (Element::kRect_Type == element->getType()) {
SET_RANDOM_COLOR
fGpu->drawSimpleRect(element->getRect(), NULL);
} else {
SET_RANDOM_COLOR
pr->drawPath(clipPath, stroke, fGpu, false);
}
} else {
SET_RANDOM_COLOR
// The view matrix is setup to do clip space -> stencil space translation, so
// draw rect in clip space.
fGpu->drawSimpleRect(SkRect::Make(clipSpaceIBounds), NULL);
}
}
}
void GrCCFiller::parseDeviceSpaceFill(const SkPath& path, const SkPoint* deviceSpacePts,
GrScissorTest scissorTest, const SkIRect& clippedDevIBounds,
const SkIVector& devToAtlasOffset) {
SkASSERT(!fInstanceBuffer); // Can't call after prepareToDraw().
SkASSERT(!path.isEmpty());
int currPathPointsIdx = fGeometry.points().count();
int currPathVerbsIdx = fGeometry.verbs().count();
PrimitiveTallies currPathPrimitiveCounts = PrimitiveTallies();
fGeometry.beginPath();
const float* conicWeights = SkPathPriv::ConicWeightData(path);
int ptsIdx = 0;
int conicWeightsIdx = 0;
bool insideContour = false;
for (SkPath::Verb verb : SkPathPriv::Verbs(path)) {
switch (verb) {
case SkPath::kMove_Verb:
if (insideContour) {
currPathPrimitiveCounts += fGeometry.endContour();
}
fGeometry.beginContour(deviceSpacePts[ptsIdx]);
++ptsIdx;
insideContour = true;
continue;
case SkPath::kClose_Verb:
if (insideContour) {
currPathPrimitiveCounts += fGeometry.endContour();
}
insideContour = false;
continue;
case SkPath::kLine_Verb:
fGeometry.lineTo(&deviceSpacePts[ptsIdx - 1]);
++ptsIdx;
continue;
case SkPath::kQuad_Verb:
fGeometry.quadraticTo(&deviceSpacePts[ptsIdx - 1]);
ptsIdx += 2;
continue;
case SkPath::kCubic_Verb:
fGeometry.cubicTo(&deviceSpacePts[ptsIdx - 1]);
ptsIdx += 3;
continue;
case SkPath::kConic_Verb:
fGeometry.conicTo(&deviceSpacePts[ptsIdx - 1], conicWeights[conicWeightsIdx]);
ptsIdx += 2;
++conicWeightsIdx;
continue;
default:
SK_ABORT("Unexpected path verb.");
}
}
SkASSERT(ptsIdx == path.countPoints());
SkASSERT(conicWeightsIdx == SkPathPriv::ConicWeightCnt(path));
if (insideContour) {
currPathPrimitiveCounts += fGeometry.endContour();
}
fPathInfos.emplace_back(scissorTest, devToAtlasOffset);
// Tessellate fans from very large and/or simple paths, in order to reduce overdraw.
int numVerbs = fGeometry.verbs().count() - currPathVerbsIdx - 1;
int64_t tessellationWork = (int64_t)numVerbs * (32 - SkCLZ(numVerbs)); // N log N.
int64_t fanningWork = (int64_t)clippedDevIBounds.height() * clippedDevIBounds.width();
if (tessellationWork * (50*50) + (100*100) < fanningWork) { // Don't tessellate under 100x100.
fPathInfos.back().tessellateFan(fGeometry, currPathVerbsIdx, currPathPointsIdx,
clippedDevIBounds, &currPathPrimitiveCounts);
}
fTotalPrimitiveCounts[(int)scissorTest] += currPathPrimitiveCounts;
if (GrScissorTest::kEnabled == scissorTest) {
fScissorSubBatches.push_back() = {fTotalPrimitiveCounts[(int)GrScissorTest::kEnabled],
clippedDevIBounds.makeOffset(devToAtlasOffset.fX,
devToAtlasOffset.fY)};
}
}
void GrGLPath::InitPathObject(GrGLGpu* gpu,
GrGLuint pathID,
const SkPath& skPath,
const GrStrokeInfo& stroke) {
SkASSERT(!stroke.isDashed());
if (!skPath.isEmpty()) {
int verbCnt = skPath.countVerbs();
int pointCnt = skPath.countPoints();
int minCoordCnt = pointCnt * 2;
SkSTArray<16, GrGLubyte, true> pathCommands(verbCnt);
SkSTArray<16, GrGLfloat, true> pathCoords(minCoordCnt);
SkDEBUGCODE(int numCoords = 0);
if ((skPath.getSegmentMasks() & SkPath::kConic_SegmentMask) == 0) {
// This branch does type punning, converting SkPoint* to GrGLfloat*.
SK_COMPILE_ASSERT(sizeof(SkPoint) == sizeof(GrGLfloat) * 2, sk_point_not_two_floats);
// This branch does not convert with SkScalarToFloat.
#ifndef SK_SCALAR_IS_FLOAT
#error Need SK_SCALAR_IS_FLOAT.
#endif
pathCommands.resize_back(verbCnt);
pathCoords.resize_back(minCoordCnt);
skPath.getPoints(reinterpret_cast<SkPoint*>(&pathCoords[0]), pointCnt);
skPath.getVerbs(&pathCommands[0], verbCnt);
for (int i = 0; i < verbCnt; ++i) {
SkPath::Verb v = static_cast<SkPath::Verb>(pathCommands[i]);
pathCommands[i] = verb_to_gl_path_cmd(v);
SkDEBUGCODE(numCoords += num_coords(v));
}
} else {
SkPoint points[4];
SkPath::RawIter iter(skPath);
SkPath::Verb verb;
while ((verb = iter.next(points)) != SkPath::kDone_Verb) {
pathCommands.push_back(verb_to_gl_path_cmd(verb));
GrGLfloat coords[6];
int coordsForVerb;
switch (verb) {
case SkPath::kMove_Verb:
points_to_coords(points, 0, 1, coords);
coordsForVerb = 2;
break;
case SkPath::kLine_Verb:
points_to_coords(points, 1, 1, coords);
coordsForVerb = 2;
break;
case SkPath::kConic_Verb:
points_to_coords(points, 1, 2, coords);
coords[4] = SkScalarToFloat(iter.conicWeight());
coordsForVerb = 5;
break;
case SkPath::kQuad_Verb:
points_to_coords(points, 1, 2, coords);
coordsForVerb = 4;
break;
case SkPath::kCubic_Verb:
points_to_coords(points, 1, 3, coords);
coordsForVerb = 6;
break;
case SkPath::kClose_Verb:
continue;
default:
SkASSERT(false); // Not reached.
continue;
}
SkDEBUGCODE(numCoords += num_coords(verb));
pathCoords.push_back_n(coordsForVerb, coords);
}
}
SkASSERT(verbCnt == pathCommands.count());
SkASSERT(numCoords == pathCoords.count());
GR_GL_CALL(gpu->glInterface(), PathCommands(pathID, pathCommands.count(), &pathCommands[0],
pathCoords.count(), GR_GL_FLOAT, &pathCoords[0]));
} else {
GR_GL_CALL(gpu->glInterface(), PathCommands(pathID, 0, NULL, 0, GR_GL_FLOAT, NULL));
}
if (stroke.needToApply()) {
SkASSERT(!stroke.isHairlineStyle());
GR_GL_CALL(gpu->glInterface(),
PathParameterf(pathID, GR_GL_PATH_STROKE_WIDTH, SkScalarToFloat(stroke.getWidth())));
GR_GL_CALL(gpu->glInterface(),
PathParameterf(pathID, GR_GL_PATH_MITER_LIMIT, SkScalarToFloat(stroke.getMiter())));
GrGLenum join = join_to_gl_join(stroke.getJoin());
GR_GL_CALL(gpu->glInterface(), PathParameteri(pathID, GR_GL_PATH_JOIN_STYLE, join));
GrGLenum cap = cap_to_gl_cap(stroke.getCap());
GR_GL_CALL(gpu->glInterface(), PathParameteri(pathID, GR_GL_PATH_END_CAPS, cap));
GR_GL_CALL(gpu->glInterface(), PathParameterf(pathID, GR_GL_PATH_STROKE_BOUND, 0.02f));
}
}
static void test_zero_length_paths(skiatest::Reporter* reporter) {
SkPath p;
SkRect bounds;
// Lone moveTo case
p.moveTo(SK_Scalar1, SK_Scalar1);
bounds.set(0, 0, 0, 0);
REPORTER_ASSERT(reporter, !p.isEmpty());
REPORTER_ASSERT(reporter, 1 == p.countPoints());
REPORTER_ASSERT(reporter, bounds == p.getBounds());
// MoveTo-MoveTo case
p.moveTo(SK_Scalar1*2, SK_Scalar1);
bounds.set(SK_Scalar1, SK_Scalar1, 2*SK_Scalar1, SK_Scalar1);
REPORTER_ASSERT(reporter, !p.isEmpty());
REPORTER_ASSERT(reporter, 2 == p.countPoints());
REPORTER_ASSERT(reporter, bounds == p.getBounds());
// moveTo-close case
p.reset();
p.moveTo(SK_Scalar1, SK_Scalar1);
p.close();
bounds.set(0, 0, 0, 0);
REPORTER_ASSERT(reporter, !p.isEmpty());
REPORTER_ASSERT(reporter, 1 == p.countPoints());
REPORTER_ASSERT(reporter, bounds == p.getBounds());
// moveTo-close-moveTo-close case
p.moveTo(SK_Scalar1*2, SK_Scalar1);
p.close();
bounds.set(SK_Scalar1, SK_Scalar1, 2*SK_Scalar1, SK_Scalar1);
REPORTER_ASSERT(reporter, !p.isEmpty());
REPORTER_ASSERT(reporter, 2 == p.countPoints());
REPORTER_ASSERT(reporter, bounds == p.getBounds());
// moveTo-line case
p.reset();
p.moveTo(SK_Scalar1, SK_Scalar1);
p.lineTo(SK_Scalar1, SK_Scalar1);
bounds.set(SK_Scalar1, SK_Scalar1, SK_Scalar1, SK_Scalar1);
REPORTER_ASSERT(reporter, !p.isEmpty());
REPORTER_ASSERT(reporter, 2 == p.countPoints());
REPORTER_ASSERT(reporter, bounds == p.getBounds());
// moveTo-lineTo-moveTo-lineTo case
p.moveTo(SK_Scalar1*2, SK_Scalar1);
p.lineTo(SK_Scalar1*2, SK_Scalar1);
bounds.set(SK_Scalar1, SK_Scalar1, SK_Scalar1*2, SK_Scalar1);
REPORTER_ASSERT(reporter, !p.isEmpty());
REPORTER_ASSERT(reporter, 4 == p.countPoints());
REPORTER_ASSERT(reporter, bounds == p.getBounds());
// moveTo-line-close case
p.reset();
p.moveTo(SK_Scalar1, SK_Scalar1);
p.lineTo(SK_Scalar1, SK_Scalar1);
p.close();
bounds.set(SK_Scalar1, SK_Scalar1, SK_Scalar1, SK_Scalar1);
REPORTER_ASSERT(reporter, !p.isEmpty());
REPORTER_ASSERT(reporter, 2 == p.countPoints());
REPORTER_ASSERT(reporter, bounds == p.getBounds());
// moveTo-line-close-moveTo-line-close case
p.moveTo(SK_Scalar1*2, SK_Scalar1);
p.lineTo(SK_Scalar1*2, SK_Scalar1);
p.close();
bounds.set(SK_Scalar1, SK_Scalar1, SK_Scalar1*2, SK_Scalar1);
REPORTER_ASSERT(reporter, !p.isEmpty());
REPORTER_ASSERT(reporter, 4 == p.countPoints());
REPORTER_ASSERT(reporter, bounds == p.getBounds());
// moveTo-quadTo case
p.reset();
p.moveTo(SK_Scalar1, SK_Scalar1);
p.quadTo(SK_Scalar1, SK_Scalar1, SK_Scalar1, SK_Scalar1);
bounds.set(SK_Scalar1, SK_Scalar1, SK_Scalar1, SK_Scalar1);
REPORTER_ASSERT(reporter, !p.isEmpty());
REPORTER_ASSERT(reporter, 3 == p.countPoints());
REPORTER_ASSERT(reporter, bounds == p.getBounds());
// moveTo-quadTo-close case
p.close();
REPORTER_ASSERT(reporter, !p.isEmpty());
REPORTER_ASSERT(reporter, 3 == p.countPoints());
REPORTER_ASSERT(reporter, bounds == p.getBounds());
// moveTo-quadTo-moveTo-quadTo case
p.reset();
p.moveTo(SK_Scalar1, SK_Scalar1);
p.quadTo(SK_Scalar1, SK_Scalar1, SK_Scalar1, SK_Scalar1);
p.moveTo(SK_Scalar1*2, SK_Scalar1);
p.quadTo(SK_Scalar1*2, SK_Scalar1, SK_Scalar1*2, SK_Scalar1);
bounds.set(SK_Scalar1, SK_Scalar1, SK_Scalar1*2, SK_Scalar1);
REPORTER_ASSERT(reporter, !p.isEmpty());
REPORTER_ASSERT(reporter, 6 == p.countPoints());
REPORTER_ASSERT(reporter, bounds == p.getBounds());
// moveTo-cubicTo case
p.reset();
p.moveTo(SK_Scalar1, SK_Scalar1);
p.cubicTo(SK_Scalar1, SK_Scalar1,
SK_Scalar1, SK_Scalar1,
SK_Scalar1, SK_Scalar1);
bounds.set(SK_Scalar1, SK_Scalar1, SK_Scalar1, SK_Scalar1);
REPORTER_ASSERT(reporter, !p.isEmpty());
REPORTER_ASSERT(reporter, 4 == p.countPoints());
REPORTER_ASSERT(reporter, bounds == p.getBounds());
// moveTo-quadTo-close case
p.close();
REPORTER_ASSERT(reporter, !p.isEmpty());
REPORTER_ASSERT(reporter, 4 == p.countPoints());
REPORTER_ASSERT(reporter, bounds == p.getBounds());
// moveTo-quadTo-moveTo-quadTo case
p.reset();
p.moveTo(SK_Scalar1, SK_Scalar1);
p.cubicTo(SK_Scalar1, SK_Scalar1,
SK_Scalar1, SK_Scalar1,
SK_Scalar1, SK_Scalar1);
p.moveTo(SK_Scalar1*2, SK_Scalar1);
p.cubicTo(SK_Scalar1*2, SK_Scalar1,
SK_Scalar1*2, SK_Scalar1,
SK_Scalar1*2, SK_Scalar1);
bounds.set(SK_Scalar1, SK_Scalar1, SK_Scalar1*2, SK_Scalar1);
REPORTER_ASSERT(reporter, !p.isEmpty());
REPORTER_ASSERT(reporter, 8 == p.countPoints());
REPORTER_ASSERT(reporter, bounds == p.getBounds());
}
////////////////////////////////////////////////////////////////////////////////
// Create a 1-bit clip mask in the stencil buffer. 'devClipBounds' are in device
// (as opposed to canvas) coordinates
bool GrClipMaskManager::CreateStencilClipMask(GrContext* context,
GrDrawContext* drawContext,
int32_t elementsGenID,
GrReducedClip::InitialState initialState,
const GrReducedClip::ElementList& elements,
const SkIRect& clipSpaceIBounds,
const SkIPoint& clipSpaceToStencilOffset) {
SkASSERT(drawContext);
GrStencilAttachment* stencilAttachment = context->resourceProvider()->attachStencilAttachment(
drawContext->accessRenderTarget());
if (nullptr == stencilAttachment) {
return false;
}
// TODO: these need to be swapped over to using a StencilAttachmentProxy
if (stencilAttachment->mustRenderClip(elementsGenID, clipSpaceIBounds, clipSpaceToStencilOffset)) {
stencilAttachment->setLastClip(elementsGenID, clipSpaceIBounds, clipSpaceToStencilOffset);
// Set the matrix so that rendered clip elements are transformed from clip to stencil space.
SkVector translate = {
SkIntToScalar(clipSpaceToStencilOffset.fX),
SkIntToScalar(clipSpaceToStencilOffset.fY)
};
SkMatrix viewMatrix;
viewMatrix.setTranslate(translate);
// We set the current clip to the bounds so that our recursive draws are scissored to them.
SkIRect stencilSpaceIBounds(clipSpaceIBounds);
stencilSpaceIBounds.offset(clipSpaceToStencilOffset);
GrFixedClip clip(stencilSpaceIBounds);
drawContext->drawContextPriv().clearStencilClip(
stencilSpaceIBounds,
GrReducedClip::kAllIn_InitialState == initialState);
// walk through each clip element and perform its set op
// with the existing clip.
for (GrReducedClip::ElementList::Iter iter(elements.headIter()); iter.get(); iter.next()) {
const Element* element = iter.get();
bool useHWAA = element->isAA() && drawContext->isStencilBufferMultisampled();
bool fillInverted = false;
// enabled at bottom of loop
clip.enableStencilClip(false);
// This will be used to determine whether the clip shape can be rendered into the
// stencil with arbitrary stencil settings.
GrPathRenderer::StencilSupport stencilSupport;
SkRegion::Op op = element->getOp();
GrPathRenderer* pr = nullptr;
SkPath clipPath;
if (Element::kRect_Type == element->getType()) {
stencilSupport = GrPathRenderer::kNoRestriction_StencilSupport;
fillInverted = false;
} else {
element->asPath(&clipPath);
fillInverted = clipPath.isInverseFillType();
if (fillInverted) {
clipPath.toggleInverseFillType();
}
GrShape shape(clipPath, GrStyle::SimpleFill());
GrPathRenderer::CanDrawPathArgs canDrawArgs;
canDrawArgs.fShaderCaps = context->caps()->shaderCaps();
canDrawArgs.fViewMatrix = &viewMatrix;
canDrawArgs.fShape = &shape;
canDrawArgs.fAntiAlias = false;
canDrawArgs.fHasUserStencilSettings = false;
canDrawArgs.fIsStencilBufferMSAA = drawContext->isStencilBufferMultisampled();
pr = context->drawingManager()->getPathRenderer(canDrawArgs, false,
GrPathRendererChain::kStencilOnly_DrawType,
&stencilSupport);
if (!pr) {
return false;
}
}
bool canRenderDirectToStencil =
GrPathRenderer::kNoRestriction_StencilSupport == stencilSupport;
bool drawDirectToClip; // Given the renderer, the element,
// fill rule, and set operation should
// we render the element directly to
// stencil bit used for clipping.
GrUserStencilSettings const* const* stencilPasses =
GrStencilSettings::GetClipPasses(op, canRenderDirectToStencil, fillInverted,
&drawDirectToClip);
// draw the element to the client stencil bits if necessary
if (!drawDirectToClip) {
static constexpr GrUserStencilSettings kDrawToStencil(
GrUserStencilSettings::StaticInit<
0x0000,
GrUserStencilTest::kAlways,
0xffff,
GrUserStencilOp::kIncMaybeClamp,
GrUserStencilOp::kIncMaybeClamp,
0xffff>()
);
if (Element::kRect_Type == element->getType()) {
drawContext->drawContextPriv().stencilRect(clip, &kDrawToStencil, useHWAA,
viewMatrix, element->getRect());
} else {
if (!clipPath.isEmpty()) {
GrShape shape(clipPath, GrStyle::SimpleFill());
if (canRenderDirectToStencil) {
GrPaint paint;
paint.setXPFactory(GrDisableColorXPFactory::Make());
paint.setAntiAlias(element->isAA());
GrPathRenderer::DrawPathArgs args;
args.fResourceProvider = context->resourceProvider();
args.fPaint = &paint;
args.fUserStencilSettings = &kDrawToStencil;
args.fDrawContext = drawContext;
args.fClip = &clip;
args.fColor = GrColor_WHITE;
args.fViewMatrix = &viewMatrix;
args.fShape = &shape;
args.fAntiAlias = false;
args.fGammaCorrect = false;
pr->drawPath(args);
} else {
GrPathRenderer::StencilPathArgs args;
args.fResourceProvider = context->resourceProvider();
args.fDrawContext = drawContext;
args.fClip = &clip;
args.fViewMatrix = &viewMatrix;
args.fIsAA = element->isAA();
args.fShape = &shape;
pr->stencilPath(args);
}
}
}
}
// now we modify the clip bit by rendering either the clip
// element directly or a bounding rect of the entire clip.
clip.enableStencilClip(true);
for (GrUserStencilSettings const* const* pass = stencilPasses; *pass; ++pass) {
if (drawDirectToClip) {
if (Element::kRect_Type == element->getType()) {
drawContext->drawContextPriv().stencilRect(clip, *pass, useHWAA, viewMatrix,
element->getRect());
} else {
GrShape shape(clipPath, GrStyle::SimpleFill());
GrPaint paint;
paint.setXPFactory(GrDisableColorXPFactory::Make());
paint.setAntiAlias(element->isAA());
GrPathRenderer::DrawPathArgs args;
args.fResourceProvider = context->resourceProvider();
args.fPaint = &paint;
args.fUserStencilSettings = *pass;
args.fDrawContext = drawContext;
args.fClip = &clip;
args.fColor = GrColor_WHITE;
args.fViewMatrix = &viewMatrix;
args.fShape = &shape;
args.fAntiAlias = false;
args.fGammaCorrect = false;
pr->drawPath(args);
}
} else {
// The view matrix is setup to do clip space -> stencil space translation, so
// draw rect in clip space.
drawContext->drawContextPriv().stencilRect(clip, *pass, false, viewMatrix,
SkRect::Make(clipSpaceIBounds));
}
}
}
}
return true;
}
void draw(SkCanvas* canvas) {
SkPath path;
SkDebugf("path is " "%s" "empty", path.isEmpty() ? "" : "not ");
}
void draw_stroke(SkCanvas* canvas, const SkPath& path, SkScalar width, SkScalar scale,
bool drawText) {
if (path.isEmpty()) {
return;
}
SkRect bounds = path.getBounds();
this->setWHZ(SkScalarCeilToInt(bounds.right()), drawText
? SkScalarRoundToInt(scale * 3 / 2) : SkScalarRoundToInt(scale),
SkScalarRoundToInt(950.0f / scale));
erase(fMinSurface);
SkPaint paint;
paint.setColor(0x1f1f0f0f);
paint.setStyle(SkPaint::kStroke_Style);
paint.setStrokeWidth(width * scale * scale);
paint.setColor(0x3f0f1f3f);
if (drawText) {
fMinSurface->getCanvas()->drawPath(path, paint);
this->copyMinToMax();
fMaxSurface->draw(canvas, 0, 0, NULL);
}
paint.setAntiAlias(true);
paint.setStyle(SkPaint::kStroke_Style);
paint.setStrokeWidth(1);
paint.setColor(SKELETON_COLOR);
SkPath scaled;
SkMatrix matrix;
matrix.reset();
matrix.setScale(950 / scale, 950 / scale);
if (drawText) {
path.transform(matrix, &scaled);
} else {
scaled = path;
}
canvas->drawPath(scaled, paint);
draw_points(canvas, scaled, SKELETON_COLOR, true);
if (fDrawRibs) {
draw_ribs(canvas, scaled, width, 0xFF00FF00);
}
SkPath fill;
SkPaint p;
p.setStyle(SkPaint::kStroke_Style);
if (drawText) {
p.setStrokeWidth(width * scale * scale);
} else {
p.setStrokeWidth(width);
}
p.getFillPath(path, &fill);
SkPath scaledFill;
if (drawText) {
fill.transform(matrix, &scaledFill);
} else {
scaledFill = fill;
}
paint.setColor(WIREFRAME_COLOR);
canvas->drawPath(scaledFill, paint);
draw_points(canvas, scaledFill, WIREFRAME_COLOR, false);
}
bool GrStrokePathRenderer::onDrawPath(const SkPath& origPath,
const SkStrokeRec& stroke,
GrDrawTarget* target,
bool antiAlias) {
if (origPath.isEmpty()) {
return true;
}
SkScalar width = stroke.getWidth();
if (width <= 0) {
return false;
}
// Get the join type
SkPaint::Join join = stroke.getJoin();
SkScalar miterLimit = stroke.getMiter();
SkScalar sqMiterLimit = SkScalarMul(miterLimit, miterLimit);
if ((join == SkPaint::kMiter_Join) && (miterLimit <= SK_Scalar1)) {
// If the miter limit is small, treat it as a bevel join
join = SkPaint::kBevel_Join;
}
const bool isMiter = (join == SkPaint::kMiter_Join);
const bool isBevel = (join == SkPaint::kBevel_Join);
SkScalar invMiterLimit = isMiter ? SK_Scalar1 / miterLimit : 0;
SkScalar invMiterLimitSq = SkScalarMul(invMiterLimit, invMiterLimit);
// Allocate vertices
const int nbQuads = origPath.countPoints() + 1; // Could be "-1" if path is not closed
const int extraVerts = isMiter || isBevel ? 1 : 0;
const int maxVertexCount = nbQuads * (4 + extraVerts);
const int maxIndexCount = nbQuads * (6 + extraVerts * 3); // Each extra vert adds a triangle
target->drawState()->setDefaultVertexAttribs();
GrDrawTarget::AutoReleaseGeometry arg(target, maxVertexCount, maxIndexCount);
if (!arg.succeeded()) {
return false;
}
SkPoint* verts = reinterpret_cast<SkPoint*>(arg.vertices());
uint16_t* idxs = reinterpret_cast<uint16_t*>(arg.indices());
int vCount = 0, iCount = 0;
// Transform the path into a list of triangles
SkPath::Iter iter(origPath, false);
SkPoint pts[4];
const SkScalar radius = SkScalarMul(width, 0.5f);
SkPoint *firstPt = verts, *lastPt = NULL;
SkVector firstDir, dir;
firstDir.set(0, 0);
dir.set(0, 0);
bool isOpen = true;
for(SkPath::Verb v = iter.next(pts); v != SkPath::kDone_Verb; v = iter.next(pts)) {
switch(v) {
case SkPath::kMove_Verb:
// This will already be handled as pts[0] of the 1st line
break;
case SkPath::kClose_Verb:
isOpen = (lastPt == NULL);
break;
case SkPath::kLine_Verb:
{
SkVector v0 = dir;
dir = pts[1] - pts[0];
if (dir.setLength(radius)) {
SkVector dirT;
dirT.set(dir.fY, -dir.fX); // Get perpendicular direction
SkPoint l1a = pts[0]+dirT, l1b = pts[1]+dirT,
l2a = pts[0]-dirT, l2b = pts[1]-dirT;
SkPoint miterPt[2];
bool useMiterPoint = false;
int idx0(-1), idx1(-1);
if (NULL == lastPt) {
firstDir = dir;
} else {
SkVector v1 = dir;
if (v0.normalize() && v1.normalize()) {
SkScalar dotProd = v0.dot(v1);
// No need for bevel or miter join if the angle
// is either 0 or 180 degrees
if (!SkScalarNearlyZero(dotProd + SK_Scalar1) &&
!SkScalarNearlyZero(dotProd - SK_Scalar1)) {
bool ccw = !is_clockwise(v0, v1);
int offset = ccw ? 1 : 0;
idx0 = vCount-2+offset;
idx1 = vCount+offset;
const SkPoint* pt0 = &(lastPt[offset]);
const SkPoint* pt1 = ccw ? &l2a : &l1a;
switch(join) {
case SkPaint::kMiter_Join:
{
// *Note : Logic is from MiterJoiner
// FIXME : Special case if we have a right angle ?
// if (SkScalarNearlyZero(dotProd)) {...}
SkScalar sinHalfAngleSq =
SkScalarHalf(SK_Scalar1 + dotProd);
if (sinHalfAngleSq >= invMiterLimitSq) {
// Find the miter point (or points if it is further
// than the miter limit)
const SkPoint pt2 = *pt0+v0, pt3 = *pt1+v1;
if (intersection(*pt0, pt2, *pt1, pt3, miterPt[0]) !=
kNone_IntersectionType) {
SkPoint miterPt0 = miterPt[0] - *pt0;
SkPoint miterPt1 = miterPt[0] - *pt1;
SkScalar sqDist0 = miterPt0.dot(miterPt0);
SkScalar sqDist1 = miterPt1.dot(miterPt1);
const SkScalar rSq =
SkScalarDiv(SkScalarMul(radius, radius),
sinHalfAngleSq);
const SkScalar sqRLimit =
SkScalarMul(sqMiterLimit, rSq);
if (sqDist0 > sqRLimit || sqDist1 > sqRLimit) {
if (sqDist1 > sqRLimit) {
v1.setLength(SkScalarSqrt(sqRLimit));
miterPt[1] = *pt1+v1;
} else {
miterPt[1] = miterPt[0];
}
if (sqDist0 > sqRLimit) {
v0.setLength(SkScalarSqrt(sqRLimit));
miterPt[0] = *pt0+v0;
}
} else {
miterPt[1] = miterPt[0];
}
useMiterPoint = true;
}
}
if (useMiterPoint && (miterPt[1] == miterPt[0])) {
break;
}
}
default:
case SkPaint::kBevel_Join:
{
// Note : This currently causes some overdraw where both
// lines initially intersect. We'd need to add
// another line intersection check here if the
// overdraw becomes an issue instead of using the
// current point directly.
// Add center point
*verts++ = pts[0]; // Use current point directly
// This idx is passed the current point so increment it
++idx1;
// Add center triangle
*idxs++ = idx0;
*idxs++ = vCount;
*idxs++ = idx1;
vCount++;
iCount += 3;
}
break;
}
}
}
}
*verts++ = l1a;
*verts++ = l2a;
lastPt = verts;
*verts++ = l1b;
*verts++ = l2b;
if (useMiterPoint && (idx0 >= 0) && (idx1 >= 0)) {
firstPt[idx0] = miterPt[0];
firstPt[idx1] = miterPt[1];
}
// 1st triangle
*idxs++ = vCount+0;
*idxs++ = vCount+2;
*idxs++ = vCount+1;
// 2nd triangle
*idxs++ = vCount+1;
*idxs++ = vCount+2;
*idxs++ = vCount+3;
vCount += 4;
iCount += 6;
}
}
break;
case SkPath::kQuad_Verb:
case SkPath::kCubic_Verb:
SkDEBUGFAIL("Curves not supported!");
default:
// Unhandled cases
SkASSERT(false);
}
}
if (isOpen) {
// Add caps
switch (stroke.getCap()) {
case SkPaint::kSquare_Cap:
firstPt[0] -= firstDir;
firstPt[1] -= firstDir;
lastPt [0] += dir;
lastPt [1] += dir;
break;
case SkPaint::kRound_Cap:
SkDEBUGFAIL("Round caps not supported!");
default: // No cap
break;
}
}
SkASSERT(vCount <= maxVertexCount);
SkASSERT(iCount <= maxIndexCount);
if (vCount > 0) {
target->drawIndexed(kTriangles_GrPrimitiveType,
0, // start vertex
0, // start index
vCount,
iCount);
}
return true;
}
static void dump(const SkPath& path) {
const SkRect& r = path.getBounds();
SkDebugf("isEmpty %d, bounds [%g %g %g %g]\n", path.isEmpty(),
r.fLeft, r.fTop, r.fRight, r.fBottom);
}
////////////////////////////////////////////////////////////////////////////////
// Create a 1-bit clip mask in the stencil buffer. 'devClipBounds' are in device
// (as opposed to canvas) coordinates
bool GrClipMaskManager::createStencilClipMask(GrRenderTarget* rt,
int32_t elementsGenID,
GrReducedClip::InitialState initialState,
const GrReducedClip::ElementList& elements,
const SkIRect& clipSpaceIBounds,
const SkIPoint& clipSpaceToStencilOffset) {
SkASSERT(rt);
GrStencilAttachment* stencilAttachment =
fDrawTarget->cmmAccess().resourceProvider()->attachStencilAttachment(rt);
if (nullptr == stencilAttachment) {
return false;
}
if (stencilAttachment->mustRenderClip(elementsGenID, clipSpaceIBounds, clipSpaceToStencilOffset)) {
stencilAttachment->setLastClip(elementsGenID, clipSpaceIBounds, clipSpaceToStencilOffset);
// Set the matrix so that rendered clip elements are transformed from clip to stencil space.
SkVector translate = {
SkIntToScalar(clipSpaceToStencilOffset.fX),
SkIntToScalar(clipSpaceToStencilOffset.fY)
};
SkMatrix viewMatrix;
viewMatrix.setTranslate(translate);
// We set the current clip to the bounds so that our recursive draws are scissored to them.
SkIRect stencilSpaceIBounds(clipSpaceIBounds);
stencilSpaceIBounds.offset(clipSpaceToStencilOffset);
GrClip clip(stencilSpaceIBounds);
int clipBit = stencilAttachment->bits();
SkASSERT((clipBit <= 16) && "Ganesh only handles 16b or smaller stencil buffers");
clipBit = (1 << (clipBit-1));
fDrawTarget->cmmAccess().clearStencilClip(stencilSpaceIBounds,
GrReducedClip::kAllIn_InitialState == initialState, rt);
// walk through each clip element and perform its set op
// with the existing clip.
for (GrReducedClip::ElementList::Iter iter(elements.headIter()); iter.get(); iter.next()) {
const Element* element = iter.get();
GrPipelineBuilder pipelineBuilder;
pipelineBuilder.setClip(clip);
pipelineBuilder.setRenderTarget(rt);
pipelineBuilder.setDisableColorXPFactory();
// if the target is MSAA then we want MSAA enabled when the clip is soft
if (rt->isStencilBufferMultisampled()) {
pipelineBuilder.setState(GrPipelineBuilder::kHWAntialias_Flag, element->isAA());
}
bool fillInverted = false;
// enabled at bottom of loop
fClipMode = kIgnoreClip_StencilClipMode;
// This will be used to determine whether the clip shape can be rendered into the
// stencil with arbitrary stencil settings.
GrPathRenderer::StencilSupport stencilSupport;
GrStrokeInfo stroke(SkStrokeRec::kFill_InitStyle);
SkRegion::Op op = element->getOp();
GrPathRenderer* pr = nullptr;
SkPath clipPath;
if (Element::kRect_Type == element->getType()) {
stencilSupport = GrPathRenderer::kNoRestriction_StencilSupport;
fillInverted = false;
} else {
element->asPath(&clipPath);
fillInverted = clipPath.isInverseFillType();
if (fillInverted) {
clipPath.toggleInverseFillType();
}
pr = this->getContext()->getPathRenderer(fDrawTarget,
&pipelineBuilder,
viewMatrix,
clipPath,
stroke,
false,
GrPathRendererChain::kStencilOnly_DrawType,
&stencilSupport);
if (nullptr == pr) {
return false;
}
}
int passes;
GrStencilSettings stencilSettings[GrStencilSettings::kMaxStencilClipPasses];
bool canRenderDirectToStencil =
GrPathRenderer::kNoRestriction_StencilSupport == stencilSupport;
bool canDrawDirectToClip; // Given the renderer, the element,
// fill rule, and set operation can
// we render the element directly to
// stencil bit used for clipping.
canDrawDirectToClip = GrStencilSettings::GetClipPasses(op,
canRenderDirectToStencil,
clipBit,
fillInverted,
&passes,
stencilSettings);
// draw the element to the client stencil bits if necessary
if (!canDrawDirectToClip) {
GR_STATIC_CONST_SAME_STENCIL(gDrawToStencil,
kIncClamp_StencilOp,
kIncClamp_StencilOp,
kAlways_StencilFunc,
0xffff,
0x0000,
0xffff);
if (Element::kRect_Type == element->getType()) {
*pipelineBuilder.stencil() = gDrawToStencil;
// We need this AGP until everything is in GrBatch
fDrawTarget->drawNonAARect(pipelineBuilder,
GrColor_WHITE,
viewMatrix,
element->getRect());
} else {
if (!clipPath.isEmpty()) {
if (canRenderDirectToStencil) {
*pipelineBuilder.stencil() = gDrawToStencil;
GrPathRenderer::DrawPathArgs args;
args.fTarget = fDrawTarget;
args.fResourceProvider = this->getContext()->resourceProvider();
args.fPipelineBuilder = &pipelineBuilder;
args.fColor = GrColor_WHITE;
args.fViewMatrix = &viewMatrix;
args.fPath = &clipPath;
args.fStroke = &stroke;
args.fAntiAlias = false;
pr->drawPath(args);
} else {
GrPathRenderer::StencilPathArgs args;
args.fTarget = fDrawTarget;
args.fResourceProvider = this->getContext()->resourceProvider();
args.fPipelineBuilder = &pipelineBuilder;
args.fViewMatrix = &viewMatrix;
args.fPath = &clipPath;
args.fStroke = &stroke;
pr->stencilPath(args);
}
}
}
}
// now we modify the clip bit by rendering either the clip
// element directly or a bounding rect of the entire clip.
fClipMode = kModifyClip_StencilClipMode;
for (int p = 0; p < passes; ++p) {
*pipelineBuilder.stencil() = stencilSettings[p];
if (canDrawDirectToClip) {
if (Element::kRect_Type == element->getType()) {
// We need this AGP until everything is in GrBatch
fDrawTarget->drawNonAARect(pipelineBuilder,
GrColor_WHITE,
viewMatrix,
element->getRect());
} else {
GrPathRenderer::DrawPathArgs args;
args.fTarget = fDrawTarget;
args.fResourceProvider = this->getContext()->resourceProvider();
args.fPipelineBuilder = &pipelineBuilder;
args.fColor = GrColor_WHITE;
args.fViewMatrix = &viewMatrix;
args.fPath = &clipPath;
args.fStroke = &stroke;
args.fAntiAlias = false;
pr->drawPath(args);
}
} else {
// The view matrix is setup to do clip space -> stencil space translation, so
// draw rect in clip space.
fDrawTarget->drawNonAARect(pipelineBuilder,
GrColor_WHITE,
viewMatrix,
SkRect::Make(clipSpaceIBounds));
}
}
}
}
fClipMode = kRespectClip_StencilClipMode;
return true;
}
