bool TRACKS_CLEANER::remove_duplicates_of_track( const TRACK *aTrack )
{
bool modified = false;
TRACK *nextsegment;
for( TRACK *other = aTrack->Next(); other; other = nextsegment )
{
nextsegment = other->Next();
// New netcode, break out (can't be there any other)
if( aTrack->GetNetCode() != other->GetNetCode() )
break;
// Must be of the same type, on the same layer and the endpoints
// must be the same (maybe swapped)
if( (aTrack->Type() != other->Type()) &&
(aTrack->GetLayer() != other->GetLayer()) )
{
if( ((aTrack->GetStart() == other->GetStart()) &&
(aTrack->GetEnd() == other->GetEnd())) ||
((aTrack->GetStart() == other->GetEnd()) &&
(aTrack->GetEnd() == other->GetStart())))
{
m_Brd->GetRatsnest()->Remove( other );
other->ViewRelease();
other->DeleteStructure();
modified = true;
}
}
}
return modified;
}
static void export_vrml_tracks( BOARD* pcb ) //{{{
{
for( TRACK* track = pcb->m_Track; track != NULL; track = track->Next() )
{
if( track->Type() == PCB_VIA_T )
export_vrml_via( pcb, (SEGVIA*) track );
else
export_vrml_line( track->GetLayer(), track->GetStart().x, track->GetStart().y,
track->GetEnd().x, track->GetEnd().y, track->GetWidth(), 4 );
}
}
void ROUTER_TOOL::NeighboringSegmentFilter( const VECTOR2I& aPt, GENERAL_COLLECTOR& aCollector )
{
/*
* If the collection contains a trivial line corner (two connected segments)
* or a non-fanout-via (a via with no more than two connected segments), then
* trim the collection down to a single item (which one won't matter since
* they're all connected).
*/
// First make sure we've got something that *might* match.
int vias = aCollector.CountType( PCB_VIA_T );
int traces = aCollector.CountType( PCB_TRACE_T );
if( vias > 1 || traces > 2 || vias + traces < 1 )
return;
// Fetch first TRACK (via or trace) as our reference
TRACK* reference = nullptr;
for( int i = 0; !reference && i < aCollector.GetCount(); i++ )
reference = dynamic_cast<TRACK*>( aCollector[i] );
int refNet = reference->GetNetCode();
wxPoint refPoint( aPt.x, aPt.y );
STATUS_FLAGS flags = reference->IsPointOnEnds( refPoint, -1 );
if( flags & STARTPOINT )
refPoint = reference->GetStart();
else if( flags & ENDPOINT )
refPoint = reference->GetEnd();
// Check all items to ensure that any TRACKs are co-terminus with the reference and on
// the same net.
for( int i = 0; i < aCollector.GetCount(); i++ )
{
TRACK* neighbor = dynamic_cast<TRACK*>( aCollector[i] );
if( neighbor && neighbor != reference )
{
if( neighbor->GetNetCode() != refNet )
return;
if( neighbor->GetStart() != refPoint && neighbor->GetEnd() != refPoint )
return;
}
}
// Selection meets criteria; trim it to the reference item.
aCollector.Empty();
aCollector.Append( reference );
}
TRACK* GetTrack( TRACK* aStartTrace, const TRACK* aEndTrace,
const wxPoint& aPosition, LAYER_MSK aLayerMask )
{
for( TRACK *PtSegm = aStartTrace; PtSegm != NULL; PtSegm = PtSegm->Next() )
{
if( PtSegm->GetState( IS_DELETED | BUSY ) == 0 )
{
if( aPosition == PtSegm->GetStart() )
{
if( aLayerMask & PtSegm->GetLayerMask() )
return PtSegm;
}
if( aPosition == PtSegm->GetEnd() )
{
if( aLayerMask & PtSegm->GetLayerMask() )
return PtSegm;
}
}
if( PtSegm == aEndTrace )
break;
}
return NULL;
}
TRACK* GetTrack( TRACK* aStartTrace, const TRACK* aEndTrace,
const wxPoint& aPosition, LSET aLayerMask )
{
for( TRACK* seg = aStartTrace; seg; seg = seg->Next() )
{
if( seg->GetState( IS_DELETED | BUSY ) == 0 )
{
if( aPosition == seg->GetStart() )
{
if( ( aLayerMask & seg->GetLayerSet() ).any() )
return seg;
}
if( aPosition == seg->GetEnd() )
{
if( ( aLayerMask & seg->GetLayerSet() ).any() )
return seg;
}
}
if( seg == aEndTrace )
break;
}
return NULL;
}
// Redraw the moved node according to the mouse cursor position
static void Show_MoveNode( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPosition,
bool aErase )
{
auto displ_opts = (PCB_DISPLAY_OPTIONS*) aPanel->GetDisplayOptions();
wxPoint moveVector;
int tmp = displ_opts->m_DisplayPcbTrackFill;
GR_DRAWMODE draw_mode = GR_XOR | GR_HIGHLIGHT;
displ_opts->m_DisplayPcbTrackFill = false;
#ifndef USE_WX_OVERLAY
aErase = true;
#else
aErase = false;
#endif
// set the new track coordinates
wxPoint Pos = aPanel->GetParent()->GetCrossHairPosition();
moveVector = Pos - s_LastPos;
s_LastPos = Pos;
TRACK *track = NULL;
for( unsigned ii = 0; ii < g_DragSegmentList.size(); ii++ )
{
track = g_DragSegmentList[ii].m_Track;
if( aErase )
track->Draw( aPanel, aDC, draw_mode );
if( track->GetFlags() & STARTPOINT )
track->SetStart( track->GetStart() + moveVector );
if( track->GetFlags() & ENDPOINT )
track->SetEnd( track->GetEnd() + moveVector );
if( track->Type() == PCB_VIA_T )
track->SetEnd( track->GetStart() );
track->Draw( aPanel, aDC, draw_mode );
}
displ_opts->m_DisplayPcbTrackFill = tmp;
// Display track length
if( track )
{
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) aPanel->GetParent();
frame->SetMsgPanel( track );
}
}
void DRC::testKeepoutAreas()
{
// Test keepout areas for vias, tracks and pads inside keepout areas
for( int ii = 0; ii < m_pcb->GetAreaCount(); ii++ )
{
ZONE_CONTAINER* area = m_pcb->GetArea( ii );
if( !area->GetIsKeepout() )
continue;
for( TRACK* segm = m_pcb->m_Track; segm != NULL; segm = segm->Next() )
{
if( segm->Type() == PCB_TRACE_T )
{
if( ! area->GetDoNotAllowTracks() )
continue;
if( segm->GetLayer() != area->GetLayer() )
continue;
if( area->Outline()->Distance( segm->GetStart(), segm->GetEnd(),
segm->GetWidth() ) == 0 )
{
m_currentMarker = fillMarker( segm, NULL,
DRCE_TRACK_INSIDE_KEEPOUT, m_currentMarker );
m_pcb->Add( m_currentMarker );
m_mainWindow->GetGalCanvas()->GetView()->Add( m_currentMarker );
m_currentMarker = 0;
}
}
else if( segm->Type() == PCB_VIA_T )
{
if( ! area->GetDoNotAllowVias() )
continue;
if( ! ((VIA*)segm)->IsOnLayer( area->GetLayer() ) )
continue;
if( area->Outline()->Distance( segm->GetPosition() ) < segm->GetWidth()/2 )
{
m_currentMarker = fillMarker( segm, NULL,
DRCE_VIA_INSIDE_KEEPOUT, m_currentMarker );
m_pcb->Add( m_currentMarker );
m_mainWindow->GetGalCanvas()->GetView()->Add( m_currentMarker );
m_currentMarker = 0;
}
}
}
// Test pads: TODO
}
}
static void export_vrml_tracks( MODEL_VRML& aModel, BOARD* pcb )
{
for( TRACK* track = pcb->m_Track; track; track = track->Next() )
{
if( track->Type() == PCB_VIA_T )
{
export_vrml_via( aModel, pcb, (const VIA*) track );
}
else if( track->GetLayer() == B_Cu || track->GetLayer() == F_Cu )
export_vrml_line( aModel, track->GetLayer(),
track->GetStart().x * aModel.scale,
track->GetStart().y * aModel.scale,
track->GetEnd().x * aModel.scale,
track->GetEnd().y * aModel.scale,
track->GetWidth() * aModel.scale );
}
}
void CONNECTIONS::BuildTracksCandidatesList( TRACK* aBegin, TRACK* aEnd)
{
m_candidates.clear();
m_firstTrack = m_lastTrack = aBegin;
unsigned ii = 0;
// Count candidates ( i.e. end points )
for( const TRACK* track = aBegin; track; track = track->Next() )
{
if( track->Type() == PCB_VIA_T )
ii++;
else
ii += 2;
m_lastTrack = track;
if( track == aEnd )
break;
}
// Build candidate list
m_candidates.reserve( ii );
for( TRACK* track = aBegin; track; track = track->Next() )
{
CONNECTED_POINT candidate( track, track->GetStart() );
m_candidates.push_back( candidate );
if( track->Type() != PCB_VIA_T )
{
CONNECTED_POINT candidate2( track, track->GetEnd());
m_candidates.push_back( candidate2 );
}
if( track == aEnd )
break;
}
// Sort list by increasing X coordinate,
// and for increasing Y coordinate when items have the same X coordinate
// So candidates to the same location are consecutive in list.
sort( m_candidates.begin(), m_candidates.end(), sortConnectedPointByXthenYCoordinates );
}
void TRACKS_CLEANER::buildTrackConnectionInfo()
{
BuildTracksCandidatesList( m_Brd->m_Track, NULL);
// clear flags and variables used in cleanup
for( TRACK * track = m_Brd->m_Track; track; track = track->Next() )
{
track->start = NULL;
track->end = NULL;
track->m_PadsConnected.clear();
track->SetState( START_ON_PAD|END_ON_PAD|BUSY, false );
}
// Build connections info tracks to pads
SearchTracksConnectedToPads();
for( TRACK * track = m_Brd->m_Track; track; track = track->Next() )
{
// Mark track if connected to pads
for( unsigned jj = 0; jj < track->m_PadsConnected.size(); jj++ )
{
D_PAD * pad = track->m_PadsConnected[jj];
if( pad->HitTest( track->GetStart() ) )
{
track->start = pad;
track->SetState( START_ON_PAD, true );
}
if( pad->HitTest( track->GetEnd() ) )
{
track->end = pad;
track->SetState( END_ON_PAD, true );
}
}
}
}
void DRC::testTexts()
{
std::vector<wxPoint> textShape; // a buffer to store the text shape (set of segments)
std::vector<D_PAD*> padList = m_pcb->GetPads();
// Test text areas for vias, tracks and pads inside text areas
for( BOARD_ITEM* item = m_pcb->m_Drawings; item; item = item->Next() )
{
// Drc test only items on copper layers
if( ! IsCopperLayer( item->GetLayer() ) )
continue;
// only texts on copper layers are tested
if( item->Type() != PCB_TEXT_T )
continue;
textShape.clear();
// So far the bounding box makes up the text-area
TEXTE_PCB* text = (TEXTE_PCB*) item;
text->TransformTextShapeToSegmentList( textShape );
if( textShape.size() == 0 ) // Should not happen (empty text?)
continue;
for( TRACK* track = m_pcb->m_Track; track != NULL; track = track->Next() )
{
if( ! track->IsOnLayer( item->GetLayer() ) )
continue;
// Test the distance between each segment and the current track/via
int min_dist = ( track->GetWidth() + text->GetThickness() ) /2 +
track->GetClearance(NULL);
if( track->Type() == PCB_TRACE_T )
{
SEG segref( track->GetStart(), track->GetEnd() );
// Error condition: Distance between text segment and track segment is
// smaller than the clearance of the segment
for( unsigned jj = 0; jj < textShape.size(); jj += 2 )
{
SEG segtest( textShape[jj], textShape[jj+1] );
int dist = segref.Distance( segtest );
if( dist < min_dist )
{
addMarkerToPcb( fillMarker( track, text,
DRCE_TRACK_INSIDE_TEXT,
m_currentMarker ) );
m_currentMarker = nullptr;
break;
}
}
}
else if( track->Type() == PCB_VIA_T )
{
// Error condition: Distance between text segment and via is
// smaller than the clearance of the via
for( unsigned jj = 0; jj < textShape.size(); jj += 2 )
{
SEG segtest( textShape[jj], textShape[jj+1] );
if( segtest.PointCloserThan( track->GetPosition(), min_dist ) )
{
addMarkerToPcb( fillMarker( track, text,
DRCE_VIA_INSIDE_TEXT, m_currentMarker ) );
m_currentMarker = nullptr;
break;
}
}
}
}
// Test pads
for( unsigned ii = 0; ii < padList.size(); ii++ )
{
D_PAD* pad = padList[ii];
if( ! pad->IsOnLayer( item->GetLayer() ) )
continue;
wxPoint shape_pos = pad->ShapePos();
for( unsigned jj = 0; jj < textShape.size(); jj += 2 )
{
/* In order to make some calculations more easier or faster,
* pads and tracks coordinates will be made relative
* to the segment origin
*/
wxPoint origin = textShape[jj]; // origin will be the origin of other coordinates
m_segmEnd = textShape[jj+1] - origin;
wxPoint delta = m_segmEnd;
m_segmAngle = 0;
// for a non horizontal or vertical segment Compute the segment angle
// in tenths of degrees and its length
if( delta.x || delta.y ) // delta.x == delta.y == 0 for vias
{
// Compute the segment angle in 0,1 degrees
m_segmAngle = ArcTangente( delta.y, delta.x );
// Compute the segment length: we build an equivalent rotated segment,
// this segment is horizontal, therefore dx = length
RotatePoint( &delta, m_segmAngle ); // delta.x = length, delta.y = 0
}
m_segmLength = delta.x;
m_padToTestPos = shape_pos - origin;
if( !checkClearanceSegmToPad( pad, text->GetThickness(),
pad->GetClearance(NULL) ) )
{
addMarkerToPcb( fillMarker( pad, text,
DRCE_PAD_INSIDE_TEXT, m_currentMarker ) );
m_currentMarker = nullptr;
break;
}
}
}
}
}
/* Function BuildAirWiresTargetsList
* Build a list of candidates that can be a coonection point
* when a track is started.
* This functions prepares data to show airwires to nearest connecting points (pads)
* from the current new track to candidates during track creation
*/
void PCB_BASE_FRAME::BuildAirWiresTargetsList( BOARD_CONNECTED_ITEM* aItemRef,
const wxPoint& aPosition, bool aInit )
{
if( ( ( m_Pcb->m_Status_Pcb & LISTE_RATSNEST_ITEM_OK ) == 0 )
|| ( ( m_Pcb->m_Status_Pcb & LISTE_PAD_OK ) == 0 )
|| ( ( m_Pcb->m_Status_Pcb & NET_CODES_OK ) == 0 ) )
{
s_TargetsLocations.clear();
return;
}
s_CursorPos = aPosition; // needed for sort_by_distance
if( aInit )
{
s_TargetsLocations.clear();
if( aItemRef == NULL )
return;
int net_code = aItemRef->GetNet();
int subnet = aItemRef->GetSubNet();
if( net_code <= 0 )
return;
NETINFO_ITEM* net = m_Pcb->FindNet( net_code );
if( net == NULL ) // Should not occur
{
wxMessageBox( wxT( "BuildAirWiresTargetsList() error: net not found" ) );
return;
}
// Create a list of pads candidates ( pads not already connected to the
// current track ):
for( unsigned ii = 0; ii < net->m_PadInNetList.size(); ii++ )
{
D_PAD* pad = net->m_PadInNetList[ii];
if( pad == aItemRef )
continue;
if( !pad->GetSubNet() || (pad->GetSubNet() != subnet) )
s_TargetsLocations.push_back( pad->GetPosition() );
}
// Create a list of tracks ends candidates, not already connected to the
// current track:
for( TRACK* track = m_Pcb->m_Track; track; track = track->Next() )
{
if( track->GetNet() < net_code )
continue;
if( track->GetNet() > net_code )
break;;
if( !track->GetSubNet() || (track->GetSubNet() != subnet) )
{
if( aPosition != track->GetStart() )
s_TargetsLocations.push_back( track->GetStart() );
if( aPosition != track->GetEnd() && track->GetStart() != track->GetEnd() )
s_TargetsLocations.push_back( track->GetEnd() );
}
}
// Remove duplicate targets, using the C++ unique algorithm
sort( s_TargetsLocations.begin(), s_TargetsLocations.end(), sort_by_point );
std::vector< wxPoint >::iterator it = unique( s_TargetsLocations.begin(), s_TargetsLocations.end() );
// Using the C++ unique algorithm only moves the duplicate entries to the end of
// of the array. This removes the duplicate entries from the array.
s_TargetsLocations.resize( it - s_TargetsLocations.begin() );
} // end if Init
// in all cases, sort by distances:
sort( s_TargetsLocations.begin(), s_TargetsLocations.end(), sort_by_distance );
}
bool DRC::doTrackDrc( TRACK* aRefSeg, TRACK* aStart, bool testPads )
{
TRACK* track;
wxPoint delta; // length on X and Y axis of segments
LSET layerMask;
int net_code_ref;
wxPoint shape_pos;
NETCLASSPTR netclass = aRefSeg->GetNetClass();
BOARD_DESIGN_SETTINGS& dsnSettings = m_pcb->GetDesignSettings();
/* In order to make some calculations more easier or faster,
* pads and tracks coordinates will be made relative to the reference segment origin
*/
wxPoint origin = aRefSeg->GetStart(); // origin will be the origin of other coordinates
m_segmEnd = delta = aRefSeg->GetEnd() - origin;
m_segmAngle = 0;
layerMask = aRefSeg->GetLayerSet();
net_code_ref = aRefSeg->GetNetCode();
// Phase 0 : Test vias
if( aRefSeg->Type() == PCB_VIA_T )
{
const VIA *refvia = static_cast<const VIA*>( aRefSeg );
// test if the via size is smaller than minimum
if( refvia->GetViaType() == VIA_MICROVIA )
{
if( refvia->GetWidth() < dsnSettings.m_MicroViasMinSize )
{
m_currentMarker = fillMarker( refvia, NULL,
DRCE_TOO_SMALL_MICROVIA, m_currentMarker );
return false;
}
if( refvia->GetDrillValue() < dsnSettings.m_MicroViasMinDrill )
{
m_currentMarker = fillMarker( refvia, NULL,
DRCE_TOO_SMALL_MICROVIA_DRILL, m_currentMarker );
return false;
}
}
else
{
if( refvia->GetWidth() < dsnSettings.m_ViasMinSize )
{
m_currentMarker = fillMarker( refvia, NULL,
DRCE_TOO_SMALL_VIA, m_currentMarker );
return false;
}
if( refvia->GetDrillValue() < dsnSettings.m_ViasMinDrill )
{
m_currentMarker = fillMarker( refvia, NULL,
DRCE_TOO_SMALL_VIA_DRILL, m_currentMarker );
return false;
}
}
// test if via's hole is bigger than its diameter
// This test is necessary since the via hole size and width can be modified
// and a default via hole can be bigger than some vias sizes
if( refvia->GetDrillValue() > refvia->GetWidth() )
{
m_currentMarker = fillMarker( refvia, NULL,
DRCE_VIA_HOLE_BIGGER, m_currentMarker );
return false;
}
// For microvias: test if they are blind vias and only between 2 layers
// because they are used for very small drill size and are drill by laser
// and **only one layer** can be drilled
if( refvia->GetViaType() == VIA_MICROVIA )
{
LAYER_ID layer1, layer2;
bool err = true;
refvia->LayerPair( &layer1, &layer2 );
if( layer1 > layer2 )
std::swap( layer1, layer2 );
if( layer2 == B_Cu && layer1 == m_pcb->GetDesignSettings().GetCopperLayerCount() - 2 )
err = false;
else if( layer1 == F_Cu && layer2 == In1_Cu )
err = false;
if( err )
{
m_currentMarker = fillMarker( refvia, NULL,
DRCE_MICRO_VIA_INCORRECT_LAYER_PAIR, m_currentMarker );
return false;
}
}
}
else // This is a track segment
{
if( aRefSeg->GetWidth() < dsnSettings.m_TrackMinWidth )
{
m_currentMarker = fillMarker( aRefSeg, NULL,
DRCE_TOO_SMALL_TRACK_WIDTH, m_currentMarker );
return false;
}
}
// for a non horizontal or vertical segment Compute the segment angle
// in tenths of degrees and its length
if( delta.x || delta.y )
{
// Compute the segment angle in 0,1 degrees
m_segmAngle = ArcTangente( delta.y, delta.x );
// Compute the segment length: we build an equivalent rotated segment,
// this segment is horizontal, therefore dx = length
RotatePoint( &delta, m_segmAngle ); // delta.x = length, delta.y = 0
}
m_segmLength = delta.x;
/******************************************/
/* Phase 1 : test DRC track to pads : */
/******************************************/
/* Use a dummy pad to test DRC tracks versus holes, for pads not on all copper layers
* but having a hole
* This dummy pad has the size and shape of the hole
* to test tracks to pad hole DRC, using checkClearanceSegmToPad test function.
* Therefore, this dummy pad is a circle or an oval.
* A pad must have a parent because some functions expect a non null parent
* to find the parent board, and some other data
*/
MODULE dummymodule( m_pcb ); // Creates a dummy parent
D_PAD dummypad( &dummymodule );
dummypad.SetLayerSet( LSET::AllCuMask() ); // Ensure the hole is on all layers
// Compute the min distance to pads
if( testPads )
{
unsigned pad_count = m_pcb->GetPadCount();
for( unsigned ii = 0; ii<pad_count; ++ii )
{
D_PAD* pad = m_pcb->GetPad( ii );
/* No problem if pads are on an other layer,
* But if a drill hole exists (a pad on a single layer can have a hole!)
* we must test the hole
*/
if( !( pad->GetLayerSet() & layerMask ).any() )
{
/* We must test the pad hole. In order to use the function
* checkClearanceSegmToPad(),a pseudo pad is used, with a shape and a
* size like the hole
*/
if( pad->GetDrillSize().x == 0 )
continue;
dummypad.SetSize( pad->GetDrillSize() );
dummypad.SetPosition( pad->GetPosition() );
dummypad.SetShape( pad->GetDrillShape() == PAD_DRILL_SHAPE_OBLONG ?
PAD_SHAPE_OVAL : PAD_SHAPE_CIRCLE );
dummypad.SetOrientation( pad->GetOrientation() );
m_padToTestPos = dummypad.GetPosition() - origin;
if( !checkClearanceSegmToPad( &dummypad, aRefSeg->GetWidth(),
netclass->GetClearance() ) )
{
m_currentMarker = fillMarker( aRefSeg, pad,
DRCE_TRACK_NEAR_THROUGH_HOLE, m_currentMarker );
return false;
}
continue;
}
// The pad must be in a net (i.e pt_pad->GetNet() != 0 )
// but no problem if the pad netcode is the current netcode (same net)
if( pad->GetNetCode() // the pad must be connected
&& net_code_ref == pad->GetNetCode() ) // the pad net is the same as current net -> Ok
continue;
// DRC for the pad
shape_pos = pad->ShapePos();
m_padToTestPos = shape_pos - origin;
if( !checkClearanceSegmToPad( pad, aRefSeg->GetWidth(), aRefSeg->GetClearance( pad ) ) )
{
m_currentMarker = fillMarker( aRefSeg, pad,
DRCE_TRACK_NEAR_PAD, m_currentMarker );
return false;
}
}
}
/***********************************************/
/* Phase 2: test DRC with other track segments */
/***********************************************/
// At this point the reference segment is the X axis
// Test the reference segment with other track segments
wxPoint segStartPoint;
wxPoint segEndPoint;
for( track = aStart; track; track = track->Next() )
{
// No problem if segments have the same net code:
if( net_code_ref == track->GetNetCode() )
continue;
// No problem if segment are on different layers :
if( !( layerMask & track->GetLayerSet() ).any() )
continue;
// the minimum distance = clearance plus half the reference track
// width plus half the other track's width
int w_dist = aRefSeg->GetClearance( track );
w_dist += (aRefSeg->GetWidth() + track->GetWidth()) / 2;
// Due to many double to int conversions during calculations, which
// create rounding issues,
// the exact clearance margin cannot be really known.
// To avoid false bad DRC detection due to these rounding issues,
// slightly decrease the w_dist (remove one nanometer is enough !)
w_dist -= 1;
// If the reference segment is a via, we test it here
if( aRefSeg->Type() == PCB_VIA_T )
{
delta = track->GetEnd() - track->GetStart();
segStartPoint = aRefSeg->GetStart() - track->GetStart();
if( track->Type() == PCB_VIA_T )
{
// Test distance between two vias, i.e. two circles, trivial case
if( EuclideanNorm( segStartPoint ) < w_dist )
{
m_currentMarker = fillMarker( aRefSeg, track,
DRCE_VIA_NEAR_VIA, m_currentMarker );
return false;
}
}
else // test via to segment
{
// Compute l'angle du segment a tester;
double angle = ArcTangente( delta.y, delta.x );
// Compute new coordinates ( the segment become horizontal)
RotatePoint( &delta, angle );
RotatePoint( &segStartPoint, angle );
if( !checkMarginToCircle( segStartPoint, w_dist, delta.x ) )
{
m_currentMarker = fillMarker( track, aRefSeg,
DRCE_VIA_NEAR_TRACK, m_currentMarker );
return false;
}
}
continue;
}
/* We compute segStartPoint, segEndPoint = starting and ending point coordinates for
* the segment to test in the new axis : the new X axis is the
* reference segment. We must translate and rotate the segment to test
*/
segStartPoint = track->GetStart() - origin;
segEndPoint = track->GetEnd() - origin;
RotatePoint( &segStartPoint, m_segmAngle );
RotatePoint( &segEndPoint, m_segmAngle );
if( track->Type() == PCB_VIA_T )
{
if( checkMarginToCircle( segStartPoint, w_dist, m_segmLength ) )
continue;
m_currentMarker = fillMarker( aRefSeg, track,
DRCE_TRACK_NEAR_VIA, m_currentMarker );
return false;
}
/* We have changed axis:
* the reference segment is Horizontal.
* 3 cases : the segment to test can be parallel, perpendicular or have an other direction
*/
if( segStartPoint.y == segEndPoint.y ) // parallel segments
{
if( abs( segStartPoint.y ) >= w_dist )
continue;
// Ensure segStartPoint.x <= segEndPoint.x
if( segStartPoint.x > segEndPoint.x )
std::swap( segStartPoint.x, segEndPoint.x );
if( segStartPoint.x > (-w_dist) && segStartPoint.x < (m_segmLength + w_dist) ) /* possible error drc */
{
// the start point is inside the reference range
// X........
// O--REF--+
// Fine test : we consider the rounded shape of each end of the track segment:
if( segStartPoint.x >= 0 && segStartPoint.x <= m_segmLength )
{
m_currentMarker = fillMarker( aRefSeg, track,
DRCE_TRACK_ENDS1, m_currentMarker );
return false;
}
if( !checkMarginToCircle( segStartPoint, w_dist, m_segmLength ) )
{
m_currentMarker = fillMarker( aRefSeg, track,
DRCE_TRACK_ENDS2, m_currentMarker );
return false;
}
}
if( segEndPoint.x > (-w_dist) && segEndPoint.x < (m_segmLength + w_dist) )
{
// the end point is inside the reference range
// .....X
// O--REF--+
// Fine test : we consider the rounded shape of the ends
if( segEndPoint.x >= 0 && segEndPoint.x <= m_segmLength )
{
m_currentMarker = fillMarker( aRefSeg, track,
DRCE_TRACK_ENDS3, m_currentMarker );
return false;
}
if( !checkMarginToCircle( segEndPoint, w_dist, m_segmLength ) )
{
m_currentMarker = fillMarker( aRefSeg, track,
DRCE_TRACK_ENDS4, m_currentMarker );
return false;
}
}
if( segStartPoint.x <=0 && segEndPoint.x >= 0 )
{
// the segment straddles the reference range (this actually only
// checks if it straddles the origin, because the other cases where already
// handled)
// X.............X
// O--REF--+
m_currentMarker = fillMarker( aRefSeg, track,
DRCE_TRACK_SEGMENTS_TOO_CLOSE, m_currentMarker );
return false;
}
}
else if( segStartPoint.x == segEndPoint.x ) // perpendicular segments
{
if( ( segStartPoint.x <= (-w_dist) ) || ( segStartPoint.x >= (m_segmLength + w_dist) ) )
continue;
// Test if segments are crossing
if( segStartPoint.y > segEndPoint.y )
std::swap( segStartPoint.y, segEndPoint.y );
if( (segStartPoint.y < 0) && (segEndPoint.y > 0) )
{
m_currentMarker = fillMarker( aRefSeg, track,
DRCE_TRACKS_CROSSING, m_currentMarker );
return false;
}
// At this point the drc error is due to an end near a reference segm end
if( !checkMarginToCircle( segStartPoint, w_dist, m_segmLength ) )
{
m_currentMarker = fillMarker( aRefSeg, track,
DRCE_ENDS_PROBLEM1, m_currentMarker );
return false;
}
if( !checkMarginToCircle( segEndPoint, w_dist, m_segmLength ) )
{
m_currentMarker = fillMarker( aRefSeg, track,
DRCE_ENDS_PROBLEM2, m_currentMarker );
return false;
}
}
else // segments quelconques entre eux
{
// calcul de la "surface de securite du segment de reference
// First rought 'and fast) test : the track segment is like a rectangle
m_xcliplo = m_ycliplo = -w_dist;
m_xcliphi = m_segmLength + w_dist;
m_ycliphi = w_dist;
// A fine test is needed because a serment is not exactly a
// rectangle, it has rounded ends
if( !checkLine( segStartPoint, segEndPoint ) )
{
/* 2eme passe : the track has rounded ends.
* we must a fine test for each rounded end and the
* rectangular zone
*/
m_xcliplo = 0;
m_xcliphi = m_segmLength;
if( !checkLine( segStartPoint, segEndPoint ) )
{
m_currentMarker = fillMarker( aRefSeg, track,
DRCE_ENDS_PROBLEM3, m_currentMarker );
return false;
}
else // The drc error is due to the starting or the ending point of the reference segment
{
// Test the starting and the ending point
segStartPoint = track->GetStart();
segEndPoint = track->GetEnd();
delta = segEndPoint - segStartPoint;
// Compute the segment orientation (angle) en 0,1 degre
double angle = ArcTangente( delta.y, delta.x );
// Compute the segment length: delta.x = length after rotation
RotatePoint( &delta, angle );
/* Comute the reference segment coordinates relatives to a
* X axis = current tested segment
*/
wxPoint relStartPos = aRefSeg->GetStart() - segStartPoint;
wxPoint relEndPos = aRefSeg->GetEnd() - segStartPoint;
RotatePoint( &relStartPos, angle );
RotatePoint( &relEndPos, angle );
if( !checkMarginToCircle( relStartPos, w_dist, delta.x ) )
{
m_currentMarker = fillMarker( aRefSeg, track,
DRCE_ENDS_PROBLEM4, m_currentMarker );
return false;
}
if( !checkMarginToCircle( relEndPos, w_dist, delta.x ) )
{
m_currentMarker = fillMarker( aRefSeg, track,
DRCE_ENDS_PROBLEM5, m_currentMarker );
return false;
}
}
}
}
}
return true;
}
/**
* Function Magnetize
* tests to see if there are any magnetic items within near reach of the given
* "curpos". If yes, then curpos is adjusted appropriately according to that
* near magnetic item and true is returned.
* @param frame = the current frame
* @param aCurrentTool = the current tool id (from vertical right toolbar)
* @param aGridSize = the current grid size
* @param on_grid = the on grid position near initial position ( often on_grid = curpos)
* @param curpos The initial position, and what to adjust if a change is needed.
* @return bool - true if the position was adjusted magnetically, else false.
*/
bool Magnetize( PCB_EDIT_FRAME* frame, int aCurrentTool, wxSize aGridSize,
wxPoint on_grid, wxPoint* curpos )
{
bool doCheckNet = g_MagneticPadOption != capture_always && g_Drc_On;
bool doTrack = false;
bool doPad = false;
bool amMovingVia = false;
BOARD* m_Pcb = frame->GetBoard();
TRACK* currTrack = g_CurrentTrackSegment;
BOARD_ITEM* currItem = frame->GetCurItem();
PCB_SCREEN* screen = frame->GetScreen();
wxPoint pos = frame->RefPos( true );
// D( printf( "currTrack=%p currItem=%p currTrack->Type()=%d currItem->Type()=%d\n", currTrack, currItem, currTrack ? currTrack->Type() : 0, currItem ? currItem->Type() : 0 ); )
if( !currTrack && currItem && currItem->Type()==PCB_VIA_T && currItem->GetFlags() )
{
// moving a VIA
currTrack = (TRACK*) currItem;
amMovingVia = true;
return false; // comment this return out and play with it.
}
else if( currItem != currTrack )
{
currTrack = NULL;
}
if( g_MagneticPadOption == capture_always )
doPad = true;
if( g_MagneticTrackOption == capture_always )
doTrack = true;
if( aCurrentTool == ID_TRACK_BUTT || amMovingVia )
{
int q = capture_cursor_in_track_tool;
if( g_MagneticPadOption == q )
doPad = true;
if( g_MagneticTrackOption == q )
doTrack = true;
}
// D(printf("doPad=%d doTrack=%d aCurrentTool=%d amMovingVia=%d\n", doPad, doTrack, aCurrentTool, amMovingVia );)
// The search precedence order is pads, then tracks/vias
if( doPad )
{
LSET layer_mask( screen->m_Active_Layer );
D_PAD* pad = m_Pcb->GetPad( pos, layer_mask );
if( pad )
{
if( doCheckNet && currTrack && currTrack->GetNetCode() != pad->GetNetCode() )
return false;
*curpos = pad->GetPosition();
return true;
}
}
// after pads, only track & via tests remain, skip them if not desired
if( doTrack )
{
LAYER_ID layer = screen->m_Active_Layer;
for( TRACK* via = m_Pcb->m_Track;
via && (via = via->GetVia( *curpos, layer )) != NULL;
via = via->Next() )
{
if( via != currTrack ) // a via cannot influence itself
{
if( !doCheckNet || !currTrack || currTrack->GetNetCode() == via->GetNetCode() )
{
*curpos = via->GetStart();
// D(printf("via hit\n");)
return true;
}
}
}
if( !currTrack )
{
LSET layers( layer );
TRACK* track = m_Pcb->GetVisibleTrack( m_Pcb->m_Track, pos, layers );
if( !track || track->Type() != PCB_TRACE_T )
{
// D(printf("!currTrack and track=%p not found, layer_mask=0x%X\n", track, layer_mask );)
return false;
}
// D( printf( "Project\n" ); )
return Project( curpos, on_grid, track );
}
/*
* In two segment mode, ignore the final segment if it's inside a grid square.
*/
if( !amMovingVia && currTrack && g_TwoSegmentTrackBuild && currTrack->Back()
&& currTrack->GetStart().x - aGridSize.x < currTrack->GetEnd().x
&& currTrack->GetStart().x + aGridSize.x > currTrack->GetEnd().x
&& currTrack->GetStart().y - aGridSize.y < currTrack->GetEnd().y
&& currTrack->GetStart().y + aGridSize.y > currTrack->GetEnd().y )
{
currTrack = currTrack->Back();
}
for( TRACK* track = m_Pcb->m_Track; track; track = track->Next() )
{
if( track->Type() != PCB_TRACE_T )
continue;
if( doCheckNet && currTrack && currTrack->GetNetCode() != track->GetNetCode() )
continue;
if( m_Pcb->IsLayerVisible( track->GetLayer() ) == false )
continue;
// omit the layer check if moving a via
if( !amMovingVia && !track->IsOnLayer( layer ) )
continue;
if( !track->HitTest( *curpos ) )
continue;
// D(printf( "have track prospect\n");)
if( Join( curpos, track->GetStart(), track->GetEnd(), currTrack->GetStart(), currTrack->GetEnd() ) )
{
// D(printf( "join currTrack->Type()=%d\n", currTrack->Type() );)
return true;
}
if( aCurrentTool == ID_TRACK_BUTT || amMovingVia )
{
// At this point we have a drawing mouse on a track, we are drawing
// a new track and that new track is parallel to the track the
// mouse is on. Find the nearest end point of the track under mouse
// to the mouse and return that.
double distStart = GetLineLength( *curpos, track->GetStart() );
double distEnd = GetLineLength( *curpos, track->GetEnd() );
// if track not via, or if its a via dragging but not with its adjacent track
if( currTrack->Type() != PCB_VIA_T ||
( currTrack->GetStart() != track->GetStart() && currTrack->GetStart() != track->GetEnd() ))
{
double max_dist = currTrack->GetWidth() / 2.0f;
if( distStart <= max_dist )
{
// D(printf("nearest end is start\n");)
*curpos = track->GetStart();
return true;
}
if( distEnd <= max_dist )
{
// D(printf("nearest end is end\n");)
*curpos = track->GetEnd();
return true;
}
// @todo otherwise confine curpos such that it stays centered within "track"
}
}
}
}
return false;
}
// Delete null length segments, and intermediate points ..
bool TRACKS_CLEANER::clean_segments()
{
bool modified = false;
TRACK* segment, * nextsegment;
TRACK* other;
int flag, no_inc;
// Delete null segments
for( segment = m_Brd->m_Track; segment; segment = nextsegment )
{
nextsegment = segment->Next();
if( segment->IsNull() ) // Length segment = 0; delete it
segment->DeleteStructure();
}
// Delete redundant segments, i.e. segments having the same end points
// and layers
for( segment = m_Brd->m_Track; segment; segment = segment->Next() )
{
for( other = segment->Next(); other; other = nextsegment )
{
nextsegment = other->Next();
bool erase = false;
if( segment->Type() != other->Type() )
continue;
if( segment->GetLayer() != other->GetLayer() )
continue;
if( segment->GetNetCode() != other->GetNetCode() )
break;
if( ( segment->GetStart() == other->GetStart() ) &&
( segment->GetEnd() == other->GetEnd() ) )
erase = true;
if( ( segment->GetStart() == other->GetEnd() ) &&
( segment->GetEnd() == other->GetStart() ) )
erase = true;
// Delete redundant point
if( erase )
{
other->DeleteStructure();
modified = true;
}
}
}
// merge collinear segments:
for( segment = m_Brd->m_Track; segment; segment = nextsegment )
{
TRACK* segStart;
TRACK* segEnd;
TRACK* segDelete;
nextsegment = segment->Next();
if( segment->Type() != PCB_TRACE_T )
continue;
flag = no_inc = 0;
// search for a possible point connected to the START point of the current segment
for( segStart = segment->Next(); ; )
{
segStart = segment->GetTrace( segStart, NULL, FLG_START );
if( segStart )
{
// the two segments must have the same width
if( segment->GetWidth() != segStart->GetWidth() )
break;
// it cannot be a via
if( segStart->Type() != PCB_TRACE_T )
break;
// We must have only one segment connected
segStart->SetState( BUSY, true );
other = segment->GetTrace( m_Brd->m_Track, NULL, FLG_START );
segStart->SetState( BUSY, false );
if( other == NULL )
flag = 1; // OK
break;
}
break;
}
if( flag ) // We have the starting point of the segment is connected to an other segment
{
segDelete = mergeCollinearSegmentIfPossible( segment, segStart, FLG_START );
if( segDelete )
{
no_inc = 1;
segDelete->DeleteStructure();
modified = true;
}
}
// search for a possible point connected to the END point of the current segment:
for( segEnd = segment->Next(); ; )
{
segEnd = segment->GetTrace( segEnd, NULL, FLG_END );
if( segEnd )
{
if( segment->GetWidth() != segEnd->GetWidth() )
break;
if( segEnd->Type() != PCB_TRACE_T )
break;
// We must have only one segment connected
segEnd->SetState( BUSY, true );
other = segment->GetTrace( m_Brd->m_Track, NULL, FLG_END );
segEnd->SetState( BUSY, false );
if( other == NULL )
flag |= 2; // Ok
break;
}
else
{
break;
}
}
if( flag & 2 ) // We have the ending point of the segment is connected to an other segment
{
segDelete = mergeCollinearSegmentIfPossible( segment, segEnd, FLG_END );
if( segDelete )
{
no_inc = 1;
segDelete->DeleteStructure();
modified = true;
}
}
if( no_inc ) // The current segment was modified, retry to merge it
nextsegment = segment->Next();
}
return modified;
}
/**
* Function SwapData
* Used in undo / redo command:
* swap data between Item and a copy
* swapped data is data modified by edition, mainly sizes and texts
* so ONLY FEW values are swapped
* @param aItem = the item
* @param aImage = a copy of the item
*/
void SwapData( BOARD_ITEM* aItem, BOARD_ITEM* aImage )
{
if( aItem == NULL || aImage == NULL )
{
wxMessageBox( wxT( "SwapData error: NULL pointer" ) );
return;
}
// Swap layers:
if( aItem->Type() != PCB_MODULE_T && aItem->Type() != PCB_ZONE_AREA_T )
{
// These items have a global swap function.
int layer, layerimg;
layer = aItem->GetLayer();
layerimg = aImage->GetLayer();
aItem->SetLayer( layerimg );
aImage->SetLayer( layer );
}
switch( aItem->Type() )
{
case PCB_MODULE_T:
{
MODULE* tmp = (MODULE*) aImage->Clone();
( (MODULE*) aImage )->Copy( (MODULE*) aItem );
( (MODULE*) aItem )->Copy( tmp );
delete tmp;
}
break;
case PCB_ZONE_AREA_T:
{
ZONE_CONTAINER* tmp = (ZONE_CONTAINER*) aImage->Clone();
( (ZONE_CONTAINER*) aImage )->Copy( (ZONE_CONTAINER*) aItem );
( (ZONE_CONTAINER*) aItem )->Copy( tmp );
delete tmp;
}
break;
case PCB_LINE_T:
#if 0
EXCHG( ( (DRAWSEGMENT*) aItem )->m_Start, ( (DRAWSEGMENT*) aImage )->m_Start );
EXCHG( ( (DRAWSEGMENT*) aItem )->m_End, ( (DRAWSEGMENT*) aImage )->m_End );
EXCHG( ( (DRAWSEGMENT*) aItem )->m_Width, ( (DRAWSEGMENT*) aImage )->m_Width );
EXCHG( ( (DRAWSEGMENT*) aItem )->m_Shape, ( (DRAWSEGMENT*) aImage )->m_Shape );
#else
{
DRAWSEGMENT tmp = *(DRAWSEGMENT*) aImage;
*aImage = *aItem;
*aItem = tmp;
}
#endif
break;
case PCB_TRACE_T:
case PCB_VIA_T:
{
TRACK* track = (TRACK*) aItem;
TRACK* image = (TRACK*) aImage;
// swap start, end, width and shape for track and image.
wxPoint exchp = track->GetStart(); track->SetStart( image->GetStart() ); image->SetStart( exchp );
exchp = track->GetEnd(); track->SetEnd( image->GetEnd() ); image->SetEnd( exchp );
int atmp = track->GetWidth(); track->SetWidth( image->GetWidth() ); image->SetWidth( atmp );
atmp = track->GetShape(); track->SetShape( image->GetShape() ); image->SetShape( atmp );
atmp = track->GetDrillValue();
if( track->IsDrillDefault() )
atmp = -1;
int itmp = image->GetDrillValue();
if( image->IsDrillDefault() )
itmp = -1;
EXCHG(itmp, atmp );
if( atmp > 0 )
track->SetDrill( atmp );
else
track->SetDrillDefault();
if( itmp > 0 )
image->SetDrill( itmp );
else
image->SetDrillDefault();
}
break;
case PCB_TEXT_T:
EXCHG( ( (TEXTE_PCB*) aItem )->m_Mirror, ( (TEXTE_PCB*) aImage )->m_Mirror );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Size, ( (TEXTE_PCB*) aImage )->m_Size );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Pos, ( (TEXTE_PCB*) aImage )->m_Pos );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Thickness, ( (TEXTE_PCB*) aImage )->m_Thickness );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Orient, ( (TEXTE_PCB*) aImage )->m_Orient );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Text, ( (TEXTE_PCB*) aImage )->m_Text );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Italic, ( (TEXTE_PCB*) aImage )->m_Italic );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Bold, ( (TEXTE_PCB*) aImage )->m_Bold );
EXCHG( ( (TEXTE_PCB*) aItem )->m_HJustify, ( (TEXTE_PCB*) aImage )->m_HJustify );
EXCHG( ( (TEXTE_PCB*) aItem )->m_VJustify, ( (TEXTE_PCB*) aImage )->m_VJustify );
break;
case PCB_TARGET_T:
( (PCB_TARGET*) aItem )->Exchg( (PCB_TARGET*) aImage );
break;
case PCB_DIMENSION_T:
{
wxString txt = ( (DIMENSION*) aItem )->GetText();
( (DIMENSION*) aItem )->SetText( ( (DIMENSION*) aImage )->GetText() );
( (DIMENSION*) aImage )->SetText( txt );
EXCHG( ( (DIMENSION*) aItem )->m_Width, ( (DIMENSION*) aImage )->m_Width );
EXCHG( ( (DIMENSION*) aItem )->m_Text.m_Size, ( (DIMENSION*) aImage )->m_Text.m_Size );
EXCHG( ( (DIMENSION*) aItem )->m_Text.m_Pos, ( (DIMENSION*) aImage )->m_Text.m_Pos );
EXCHG( ( (DIMENSION*) aItem )->m_Text.m_Thickness,
( (DIMENSION*) aImage )->m_Text.m_Thickness );
EXCHG( ( (DIMENSION*) aItem )->m_Text.m_Mirror,
( (DIMENSION*) aImage )->m_Text.m_Mirror );
}
break;
case PCB_ZONE_T:
default:
wxMessageBox( wxT( "SwapData() error: unexpected type" ) );
break;
}
}
MARKER_PCB* DRC::fillMarker( const TRACK* aTrack, BOARD_ITEM* aItem, int aErrorCode,
MARKER_PCB* fillMe )
{
wxString textA = aTrack->GetSelectMenuText();
wxString textB;
wxPoint position;
wxPoint posB;
if( aItem ) // aItem might be NULL
{
textB = aItem->GetSelectMenuText();
if( aItem->Type() == PCB_PAD_T )
{
posB = position = ((D_PAD*)aItem)->GetPosition();
}
else if( aItem->Type() == PCB_VIA_T )
{
posB = position = ((VIA*)aItem)->GetPosition();
}
else if( aItem->Type() == PCB_TRACE_T )
{
TRACK* track = (TRACK*) aItem;
posB = track->GetPosition();
wxPoint endPos = track->GetEnd();
// either of aItem's start or end will be used for the marker position
// first assume start, then switch at end if needed. decision made on
// distance from end of aTrack.
position = track->GetStart();
double dToEnd = GetLineLength( endPos, aTrack->GetEnd() );
double dToStart = GetLineLength( position, aTrack->GetEnd() );
if( dToEnd < dToStart )
position = endPos;
}
}
else
position = aTrack->GetPosition();
if( fillMe )
{
if( aItem )
fillMe->SetData( aErrorCode, position,
textA, aTrack->GetPosition(),
textB, posB );
else
fillMe->SetData( aErrorCode, position,
textA, aTrack->GetPosition() );
}
else
{
if( aItem )
fillMe = new MARKER_PCB( aErrorCode, position,
textA, aTrack->GetPosition(),
textB, posB );
else
fillMe = new MARKER_PCB( aErrorCode, position,
textA, aTrack->GetPosition() );
}
return fillMe;
}
bool DIALOG_TRACK_VIA_PROPERTIES::Apply()
{
if( !check() )
return false;
for( int i = 0; i < m_items.Size(); ++i )
{
BOARD_ITEM* item = m_items.Item<BOARD_ITEM>( i );
switch( item->Type() )
{
case PCB_TRACE_T:
{
assert( m_tracks );
TRACK* t = static_cast<TRACK*>( item );
if( m_trackStartX.Valid() || m_trackStartY.Valid() )
{
wxPoint start = t->GetStart();
if( m_trackStartX.Valid() )
start.x = m_trackStartX.GetValue();
if( m_trackStartY.Valid() )
start.y = m_trackStartY.GetValue();
t->SetStart( start );
}
if( m_trackEndX.Valid() || m_trackEndY.Valid() )
{
wxPoint end = t->GetEnd();
if( m_trackEndX.Valid() )
end.x = m_trackEndX.GetValue();
if( m_trackEndY.Valid() )
end.y = m_trackEndY.GetValue();
t->SetEnd( end );
}
if( m_trackNetclass->IsChecked() )
{
t->SetWidth( t->GetNetClass()->GetTrackWidth() );
}
else if( m_trackWidth.Valid() )
{
t->SetWidth( m_trackWidth.GetValue() );
}
LAYER_NUM layer = m_TrackLayerCtrl->GetLayerSelection();
if( layer != UNDEFINED_LAYER )
t->SetLayer( (LAYER_ID) layer );
break;
}
case PCB_VIA_T:
{
assert( m_vias );
VIA* v = static_cast<VIA*>( item );
if( m_viaX.Valid() || m_viaY.Valid() )
{
wxPoint pos = v->GetPosition();
if( m_viaX.Valid() )
pos.x = m_viaX.GetValue();
if( m_viaY.Valid() )
pos.y = m_viaY.GetValue();
v->SetPosition( pos );
}
if( m_viaNetclass->IsChecked() )
{
v->SetWidth( v->GetNetClass()->GetViaDiameter() );
v->SetDrill( v->GetNetClass()->GetViaDrill() );
}
else
{
if( m_viaDiameter.Valid() )
v->SetWidth( m_viaDiameter.GetValue() );
if( m_viaDrill.Valid() )
v->SetDrill( m_viaDrill.GetValue() );
}
break;
}
default:
assert( false );
break;
}
}
return true;
}
/* drawing the track segment movement
* > s_MovingSegmentSlope slope = moving track segment slope
* > s_StartSegmentSlope slope = slope of the segment connected to the start
* point of the moving segment
* > s_EndSegmentSlope slope = slope of the segment connected to the end point
* of the moving segment
*
* moved segment function :
* yt=s_MovingSegmentSlope * x + s_MovingSegment_Yorg
*
* segment connected to moved segment's start:
* y1 = s_StartSegmentSlope * x + s_StartSegment_Yorg
*
* segment connected to moved segment's end:
* y2=s_EndSegmentSlope * x + s_EndSegment_Yorg
*
* first intersection point will be located at
* y1=yt ->
*
* xi1=(s_MovingSegment_Yorg-s_StartSegment_Yorg)/(s_StartSegmentSlope-s_MovingSegmentSlope)
* yi1=s_MovingSegmentSlope*xi1+s_MovingSegment_Yorg
* or yi1=s_StartSegmentSlope*xi1+s_MovingSegment_Yorg
*
* second intersection point
* y2=yt ->
*
* xi2=(s_MovingSegment_Yorg-s_StartSegment_Yorg)/(s_MovingSegmentSlope-s_MovingSegmentSlope)
* yi2=s_MovingSegmentSlope*xi2+s_MovingSegment_Yorg
* or yi1=s_EndSegmentSlope*xi2+s_MovingSegment_Yorg
* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
* !!!!! special attention to vertical segments because
* !!!!! their slope=infinite
* !!!!! intersection point will be calculated using the
* !!!!! segment intersecting it
* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
*
* Slope parameters are computed once, because they can become undetermined
* when moving segments
* (i.e. when a segment length is 0) and we want keep them constant
*/
static void Show_Drag_Track_Segment_With_Cte_Slope( EDA_DRAW_PANEL* aPanel, wxDC* aDC,
const wxPoint& aPosition, bool aErase )
{
double xi1 = 0, yi1 = 0, xi2 = 0, yi2 = 0; // calculated intersection points
double tx1, tx2, ty1, ty2; // temporary storage of points
int dx, dy;
bool update = true;
TRACK* Track;
TRACK* tSegmentToStart = NULL, * tSegmentToEnd = NULL;
if( g_DragSegmentList.size() == 0 )
return;
/* get the segments :
* from last to first in list are:
* the segment to move
* the segment connected to its end point (if exists)
* the segment connected to its start point (if exists)
*/
int ii = g_DragSegmentList.size() - 1;
Track = g_DragSegmentList[ii].m_Track;
if( Track == NULL )
return;
ii--;
if( ii >= 0)
{
if( s_EndSegmentPresent )
{
// Get the segment connected to the end point
tSegmentToEnd = g_DragSegmentList[ii].m_Track;
ii--;
}
if( s_StartSegmentPresent )
{
// Get the segment connected to the start point
if( ii >= 0 )
tSegmentToStart = g_DragSegmentList[ii].m_Track;
}
}
GR_DRAWMODE draw_mode = GR_XOR | GR_HIGHLIGHT;
// Undraw the current moved track segments before modification
#ifndef USE_WX_OVERLAY
// if( erase )
{
Track->Draw( aPanel, aDC, draw_mode );
if( tSegmentToStart )
tSegmentToStart->Draw( aPanel, aDC, draw_mode );
if( tSegmentToEnd )
tSegmentToEnd->Draw( aPanel, aDC, draw_mode );
}
#endif
// Compute the new track segment position
wxPoint Pos = aPanel->GetParent()->GetCrossHairPosition();
dx = Pos.x - s_LastPos.x;
dy = Pos.y - s_LastPos.y;
// move the line by dx and dy
tx1 = (double) ( Track->GetStart().x + dx );
ty1 = (double) ( Track->GetStart().y + dy );
tx2 = (double) ( Track->GetEnd().x + dx );
ty2 = (double) ( Track->GetEnd().y + dy );
// recalculate the segments new parameters and intersection points
// only the intercept will change, segment slopes does not change
// because we are moving parallel with is initial state
if( !s_MovingSegmentVertical )
{
s_MovingSegment_Yorg = ty1 - ( s_MovingSegmentSlope * tx1 );
}
if( ( !s_EndPointVertical ) && ( !s_MovingSegmentVertical ) )
{
xi2 = ( s_MovingSegment_Yorg - s_EndSegment_Yorg )
/ ( s_EndSegmentSlope - s_MovingSegmentSlope );
}
else
{
if( !s_EndPointVertical )
{
xi2 = tx2;
}
else
{
//P1=P2
if( !s_EndPointHorizontal )
{
xi2 = tx2 - dx;
}
else
{
update = false;
}
}
}
if( !s_MovingSegmentVertical )
{
yi2 = s_MovingSegmentSlope * ( xi2 ) + s_MovingSegment_Yorg;
}
else
{
if( !s_EndPointVertical )
{
yi2 = s_EndSegmentSlope * ( xi2 ) + s_EndSegment_Yorg;
}
else
{
if( !s_EndPointHorizontal )
{
update = false;
}
else
{
yi2 = s_MovingSegmentSlope * ( xi2 ) + s_MovingSegment_Yorg;
}
}
}
if( ( !s_StartPointVertical ) && ( !s_MovingSegmentVertical ) )
{
xi1 = ( s_MovingSegment_Yorg - s_StartSegment_Yorg )
/ ( s_StartSegmentSlope - s_MovingSegmentSlope );
}
else
{
if( !s_StartPointVertical )
{
xi1 = tx1;
}
else
{
//P1=P2
if( !s_StartPointHorizontal )
{
xi1 = tx1 - dx;
}
else
{
if( !s_StartPointHorizontal )
{
update = false;
}
}
}
}
if( !s_MovingSegmentVertical )
{
yi1 = s_MovingSegmentSlope * ( xi1 ) + s_MovingSegment_Yorg;
}
else
{
if( !s_StartPointVertical )
{
yi1 = s_StartSegmentSlope * ( xi1 ) + s_StartSegment_Yorg;
}
else
{
if( !s_StartPointHorizontal )
{
update = false;
}
else
{
yi2 = s_MovingSegmentSlope * ( xi1 ) + s_MovingSegment_Yorg;
}
}
}
// update the segment coordinates (if possible)
if( tSegmentToStart == NULL )
{
xi1 = tx1;
yi1 = ty1;
}
if( tSegmentToEnd == NULL )
{
xi2 = tx2;
yi2 = ty2;
}
if( update )
{
s_LastPos = Pos;
Track->SetStart( wxPoint( KiROUND( xi1 ), KiROUND( yi1 ) ) );
Track->SetEnd( wxPoint( KiROUND( xi2 ), KiROUND( yi2 ) ) );
if( tSegmentToEnd )
{
if( tSegmentToEnd->GetFlags() & STARTPOINT )
tSegmentToEnd->SetStart( Track->GetEnd() );
else
tSegmentToEnd->SetEnd( Track->GetEnd() );
}
if( tSegmentToStart )
{
if( tSegmentToStart->GetFlags() & STARTPOINT )
tSegmentToStart->SetStart( Track->GetStart() );
else
tSegmentToStart->SetEnd( Track->GetStart() );
}
}
Track->Draw( aPanel, aDC, draw_mode );
if( tSegmentToStart )
tSegmentToStart->Draw( aPanel, aDC, draw_mode );
if( tSegmentToEnd )
tSegmentToEnd->Draw( aPanel, aDC, draw_mode );
// Display track length
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) aPanel->GetParent();
frame->SetMsgPanel( Track );
}
void BOARD_ITEM::SwapData( BOARD_ITEM* aImage )
{
if( aImage == NULL )
return;
// Remark: to create images of edited items to undo, we are using Clone method
// which can duplication of items foe copy, but does not clone all members
// mainly pointers in chain and time stamp, which is set to new, unique value.
// So we have to use the current values of these parameters.
EDA_ITEM * pnext = Next();
EDA_ITEM * pback = Back();
DHEAD* mylist = m_List;
time_t timestamp = GetTimeStamp();
switch( Type() )
{
case PCB_MODULE_T:
{
MODULE* tmp = (MODULE*) aImage->Clone();
( (MODULE*) aImage )->Copy( (MODULE*) this );
( (MODULE*) this )->Copy( tmp );
delete tmp;
}
break;
case PCB_ZONE_AREA_T:
{
ZONE_CONTAINER* tmp = (ZONE_CONTAINER*) aImage->Clone();
( (ZONE_CONTAINER*) aImage )->Copy( (ZONE_CONTAINER*) this );
( (ZONE_CONTAINER*) this )->Copy( tmp );
delete tmp;
}
break;
case PCB_LINE_T:
std::swap( *((DRAWSEGMENT*)this), *((DRAWSEGMENT*)aImage) );
break;
case PCB_TRACE_T:
case PCB_VIA_T:
{
TRACK* track = (TRACK*) this;
TRACK* image = (TRACK*) aImage;
std::swap(track->m_Layer, image->m_Layer );
// swap start, end, width and shape for track and image.
wxPoint exchp = track->GetStart();
track->SetStart( image->GetStart() );
image->SetStart( exchp );
exchp = track->GetEnd();
track->SetEnd( image->GetEnd() );
image->SetEnd( exchp );
int atmp = track->GetWidth();
track->SetWidth( image->GetWidth() );
image->SetWidth( atmp );
if( Type() == PCB_VIA_T )
{
VIA *via = static_cast<VIA*>( this );
VIA *viaimage = static_cast<VIA*>( aImage );
VIATYPE_T viatmp = via->GetViaType();
via->SetViaType( viaimage->GetViaType() );
viaimage->SetViaType( viatmp );
int drilltmp = via->GetDrillValue();
if( via->IsDrillDefault() )
drilltmp = -1;
int itmp = viaimage->GetDrillValue();
if( viaimage->IsDrillDefault() )
itmp = -1;
std::swap(itmp, drilltmp );
if( drilltmp > 0 )
via->SetDrill( drilltmp );
else
via->SetDrillDefault();
if( itmp > 0 )
viaimage->SetDrill( itmp );
else
viaimage->SetDrillDefault();
}
}
break;
case PCB_TEXT_T:
std::swap( *((TEXTE_PCB*)this), *((TEXTE_PCB*)aImage) );
break;
case PCB_TARGET_T:
std::swap( *((PCB_TARGET*)this), *((PCB_TARGET*)aImage) );
break;
case PCB_DIMENSION_T:
std::swap( *((DIMENSION*)this), *((DIMENSION*)aImage) );
break;
case PCB_ZONE_T:
default:
wxLogMessage( wxT( "SwapData() error: unexpected type %d" ), Type() );
break;
}
// Restore pointers and time stamp, to be sure they are not broken
Pnext = pnext;
Pback = pback;
m_List = mylist;
SetTimeStamp( timestamp );
}
/* Plot a copper layer or mask.
* Silk screen layers are not plotted here.
*/
void PlotStandardLayer( BOARD *aBoard, PLOTTER* aPlotter,
LAYER_MSK aLayerMask, const PCB_PLOT_PARAMS& aPlotOpt )
{
BRDITEMS_PLOTTER itemplotter( aPlotter, aBoard, aPlotOpt );
itemplotter.SetLayerMask( aLayerMask );
EDA_DRAW_MODE_T plotMode = aPlotOpt.GetMode();
// Plot edge layer and graphic items
itemplotter.PlotBoardGraphicItems();
// Draw footprint shapes without pads (pads will plotted later)
// We plot here module texts, but they are usually on silkscreen layer,
// so they are not plot here but plot by PlotSilkScreen()
// Plot footprints fields (ref, value ...)
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
if( ! itemplotter.PlotAllTextsModule( module ) )
{
wxLogMessage( _( "Your BOARD has a bad layer number for module %s" ),
GetChars( module->GetReference() ) );
}
}
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
for( BOARD_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
if( ! (aLayerMask & GetLayerMask( item->GetLayer() ) ) )
continue;
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
itemplotter.Plot_1_EdgeModule( (EDGE_MODULE*) item );
break;
default:
break;
}
}
}
// Plot footprint pads
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
if( (pad->GetLayerMask() & aLayerMask) == 0 )
continue;
wxSize margin;
double width_adj = 0;
if( aLayerMask & ALL_CU_LAYERS )
width_adj = itemplotter.getFineWidthAdj();
switch( aLayerMask &
( SOLDERMASK_LAYER_BACK | SOLDERMASK_LAYER_FRONT |
SOLDERPASTE_LAYER_BACK | SOLDERPASTE_LAYER_FRONT ) )
{
case SOLDERMASK_LAYER_FRONT:
case SOLDERMASK_LAYER_BACK:
margin.x = margin.y = pad->GetSolderMaskMargin();
break;
case SOLDERPASTE_LAYER_FRONT:
case SOLDERPASTE_LAYER_BACK:
margin = pad->GetSolderPasteMargin();
break;
default:
break;
}
wxSize padPlotsSize;
padPlotsSize.x = pad->GetSize().x + ( 2 * margin.x ) + width_adj;
padPlotsSize.y = pad->GetSize().y + ( 2 * margin.y ) + width_adj;
// Don't draw a null size item :
if( padPlotsSize.x <= 0 || padPlotsSize.y <= 0 )
continue;
EDA_COLOR_T color = BLACK;
if( (pad->GetLayerMask() & LAYER_BACK) )
color = aBoard->GetVisibleElementColor( PAD_BK_VISIBLE );
if((pad->GetLayerMask() & LAYER_FRONT ) )
color = ColorFromInt( color | aBoard->GetVisibleElementColor( PAD_FR_VISIBLE ) );
// Temporary set the pad size to the required plot size:
wxSize tmppadsize = pad->GetSize();
pad->SetSize( padPlotsSize );
switch( pad->GetShape() )
{
case PAD_CIRCLE:
case PAD_OVAL:
if( aPlotOpt.GetSkipPlotNPTH_Pads() &&
(pad->GetSize() == pad->GetDrillSize()) &&
(pad->GetAttribute() == PAD_HOLE_NOT_PLATED) )
break;
// Fall through:
case PAD_TRAPEZOID:
case PAD_RECT:
default:
itemplotter.PlotPad( pad, color, plotMode );
break;
}
pad->SetSize( tmppadsize ); // Restore the pad size
}
}
// Plot vias on copper layers, and if aPlotOpt.GetPlotViaOnMaskLayer() is true,
// plot them on solder mask
for( TRACK* track = aBoard->m_Track; track; track = track->Next() )
{
const VIA* Via = dynamic_cast<const VIA*>( track );
if( !Via )
continue;
// vias are not plotted if not on selected layer, but if layer
// is SOLDERMASK_LAYER_BACK or SOLDERMASK_LAYER_FRONT,vias are drawn,
// only if they are on the corresponding external copper layer
int via_mask_layer = Via->GetLayerMask();
if( aPlotOpt.GetPlotViaOnMaskLayer() )
{
if( via_mask_layer & LAYER_BACK )
via_mask_layer |= SOLDERMASK_LAYER_BACK;
if( via_mask_layer & LAYER_FRONT )
via_mask_layer |= SOLDERMASK_LAYER_FRONT;
}
if( ( via_mask_layer & aLayerMask ) == 0 )
continue;
int via_margin = 0;
double width_adj = 0;
// If the current layer is a solder mask, use the global mask
// clearance for vias
if( ( aLayerMask & ( SOLDERMASK_LAYER_BACK | SOLDERMASK_LAYER_FRONT ) ) )
via_margin = aBoard->GetDesignSettings().m_SolderMaskMargin;
if( aLayerMask & ALL_CU_LAYERS )
width_adj = itemplotter.getFineWidthAdj();
int diameter = Via->GetWidth() + 2 * via_margin + width_adj;
// Don't draw a null size item :
if( diameter <= 0 )
continue;
EDA_COLOR_T color = aBoard->GetVisibleElementColor(VIAS_VISIBLE + Via->GetViaType());
// Set plot color (change WHITE to LIGHTGRAY because
// the white items are not seen on a white paper or screen
aPlotter->SetColor( color != WHITE ? color : LIGHTGRAY);
aPlotter->FlashPadCircle( Via->GetStart(), diameter, plotMode );
}
// Plot tracks (not vias) :
for( TRACK* track = aBoard->m_Track; track; track = track->Next() )
{
if( track->Type() == PCB_VIA_T )
continue;
if( (GetLayerMask( track->GetLayer() ) & aLayerMask) == 0 )
continue;
int width = track->GetWidth() + itemplotter.getFineWidthAdj();
aPlotter->SetColor( itemplotter.getColor( track->GetLayer() ) );
aPlotter->ThickSegment( track->GetStart(), track->GetEnd(), width, plotMode );
}
// Plot zones (outdated, for old boards compatibility):
for( TRACK* track = aBoard->m_Zone; track; track = track->Next() )
{
if( (GetLayerMask( track->GetLayer() ) & aLayerMask) == 0 )
continue;
int width = track->GetWidth() + itemplotter.getFineWidthAdj();
aPlotter->SetColor( itemplotter.getColor( track->GetLayer() ) );
aPlotter->ThickSegment( track->GetStart(), track->GetEnd(), width, plotMode );
}
// Plot filled ares
for( int ii = 0; ii < aBoard->GetAreaCount(); ii++ )
{
ZONE_CONTAINER* zone = aBoard->GetArea( ii );
if( ( GetLayerMask(zone->GetLayer() ) & aLayerMask ) == 0 )
continue;
itemplotter.PlotFilledAreas( zone );
}
// Adding drill marks, if required and if the plotter is able to plot them:
if( aPlotOpt.GetDrillMarksType() != PCB_PLOT_PARAMS::NO_DRILL_SHAPE )
itemplotter.PlotDrillMarks();
}
void ZONE_CONTAINER::TestForCopperIslandAndRemoveInsulatedIslands( BOARD* aPcb )
{
if( m_FilledPolysList.GetCornersCount() == 0 )
return;
// Build a list of points connected to the net:
// list of coordinates of pads and vias on this layer and on this net.
std::vector <wxPoint> listPointsCandidates;
for( MODULE* module = aPcb->m_Modules; module; module = module->Next() )
{
for( D_PAD* pad = module->Pads(); pad != NULL; pad = pad->Next() )
{
if( !pad->IsOnLayer( GetLayer() ) )
continue;
if( pad->GetNet() != GetNet() )
continue;
listPointsCandidates.push_back( pad->GetPosition() );
}
}
for( TRACK* track = aPcb->m_Track; track; track = track->Next() )
{
if( !track->IsOnLayer( GetLayer() ) )
continue;
if( track->GetNet() != GetNet() )
continue;
listPointsCandidates.push_back( track->GetStart() );
if( track->Type() != PCB_VIA_T )
listPointsCandidates.push_back( track->GetEnd() );
}
// test if a point is inside
unsigned indexstart = 0, indexend;
bool connected = false;
for( indexend = 0; indexend < m_FilledPolysList.GetCornersCount(); indexend++ )
{
if( m_FilledPolysList[indexend].end_contour ) // end of a filled sub-area found
{
EDA_RECT bbox = CalculateSubAreaBoundaryBox( indexstart, indexend );
for( unsigned ic = 0; ic < listPointsCandidates.size(); ic++ )
{
// test if this area is connected to a board item:
wxPoint pos = listPointsCandidates[ic];
if( !bbox.Contains( pos ) )
continue;
if( TestPointInsidePolygon( m_FilledPolysList, indexstart, indexend,
pos.x, pos.y ) )
{
connected = true;
break;
}
}
if( connected ) // this polygon is connected: analyse next polygon
{
indexstart = indexend + 1; // indexstart points the first point of the next polygon
connected = false;
}
else // Not connected: remove this polygon
{
m_FilledPolysList.DeleteCorners( indexstart, indexend );
indexend = indexstart; /* indexstart points the first point of the next polygon
* because the current poly is removed */
}
}
}
}
bool TRACKS_CLEANER::clean_vias()
{
TRACK* next_track;
bool modified = false;
for( TRACK* track = m_Brd->m_Track; track; track = track->Next() )
{
// Correct via m_End defects (if any)
if( track->Type() == PCB_VIA_T )
{
if( track->GetStart() != track->GetEnd() )
track->SetEnd( track->GetStart() );
}
if( track->GetShape() != VIA_THROUGH )
continue;
// Search and delete others vias at same location
TRACK* alt_track = track->Next();
for( ; alt_track != NULL; alt_track = next_track )
{
next_track = alt_track->Next();
if( alt_track->GetShape() != VIA_THROUGH )
continue;
if( alt_track->GetStart() != track->GetStart() )
continue;
// delete via
alt_track->UnLink();
delete alt_track;
modified = true;
}
}
// Delete Via on pads at same location
for( TRACK* track = m_Brd->m_Track; track != NULL; track = next_track )
{
next_track = track->Next();
if( track->GetShape() != VIA_THROUGH )
continue;
// Examine the list of connected pads:
// if one pad through is found, the via can be removed
for( unsigned ii = 0; ii < track->m_PadsConnected.size(); ii++ )
{
D_PAD * pad = track->m_PadsConnected[ii];
if( (pad->GetLayerMask() & ALL_CU_LAYERS) == ALL_CU_LAYERS )
{
// redundant: via delete it
track->UnLink();
delete track;
modified = true;
break;
}
}
}
return modified;
}
/* This function is used by Retrace and read the autorouting matrix data cells to create
* the real track on the physical board
*/
static void OrCell_Trace( BOARD* pcb, int col, int row,
int side, int orient, int current_net_code )
{
if( orient == HOLE ) // placement of a via
{
VIA *newVia = new VIA( pcb );
g_CurrentTrackList.PushBack( newVia );
g_CurrentTrackSegment->SetState( TRACK_AR, true );
g_CurrentTrackSegment->SetLayer( F_Cu );
g_CurrentTrackSegment->SetStart(wxPoint( pcb->GetBoundingBox().GetX() +
( RoutingMatrix.m_GridRouting * row ),
pcb->GetBoundingBox().GetY() +
( RoutingMatrix.m_GridRouting * col )));
g_CurrentTrackSegment->SetEnd( g_CurrentTrackSegment->GetStart() );
g_CurrentTrackSegment->SetWidth( pcb->GetDesignSettings().GetCurrentViaSize() );
newVia->SetViaType( pcb->GetDesignSettings().m_CurrentViaType );
g_CurrentTrackSegment->SetNetCode( current_net_code );
}
else // placement of a standard segment
{
TRACK *newTrack = new TRACK( pcb );
int dx0, dy0, dx1, dy1;
g_CurrentTrackList.PushBack( newTrack );
g_CurrentTrackSegment->SetLayer( g_Route_Layer_BOTTOM );
if( side == TOP )
g_CurrentTrackSegment->SetLayer( g_Route_Layer_TOP );
g_CurrentTrackSegment->SetState( TRACK_AR, true );
g_CurrentTrackSegment->SetEnd( wxPoint( pcb->GetBoundingBox().GetX() +
( RoutingMatrix.m_GridRouting * row ),
pcb->GetBoundingBox().GetY() +
( RoutingMatrix.m_GridRouting * col )));
g_CurrentTrackSegment->SetNetCode( current_net_code );
if( g_CurrentTrackSegment->Back() == NULL ) // Start trace.
{
g_CurrentTrackSegment->SetStart( wxPoint( segm_fX, segm_fY ) );
// Placement on the center of the pad if outside grid.
dx1 = g_CurrentTrackSegment->GetEnd().x - g_CurrentTrackSegment->GetStart().x;
dy1 = g_CurrentTrackSegment->GetEnd().y - g_CurrentTrackSegment->GetStart().y;
dx0 = pt_cur_ch->m_PadEnd->GetPosition().x - g_CurrentTrackSegment->GetStart().x;
dy0 = pt_cur_ch->m_PadEnd->GetPosition().y - g_CurrentTrackSegment->GetStart().y;
// If aligned, change the origin point.
if( abs( dx0 * dy1 ) == abs( dx1 * dy0 ) )
{
g_CurrentTrackSegment->SetStart( pt_cur_ch->m_PadEnd->GetPosition() );
}
else // Creation of a supplemental segment
{
g_CurrentTrackSegment->SetStart( pt_cur_ch->m_PadEnd->GetPosition() );
newTrack = (TRACK*)g_CurrentTrackSegment->Clone();
newTrack->SetStart( g_CurrentTrackSegment->GetEnd());
g_CurrentTrackList.PushBack( newTrack );
}
}
else
{
if( g_CurrentTrackSegment->Back() )
{
g_CurrentTrackSegment->SetStart( g_CurrentTrackSegment->Back()->GetEnd() );
}
}
g_CurrentTrackSegment->SetWidth( pcb->GetDesignSettings().GetCurrentTrackWidth() );
if( g_CurrentTrackSegment->GetStart() != g_CurrentTrackSegment->GetEnd() )
{
// Reduce aligned segments by one.
TRACK* oldTrack = g_CurrentTrackSegment->Back();
if( oldTrack && oldTrack->Type() != PCB_VIA_T )
{
dx1 = g_CurrentTrackSegment->GetEnd().x - g_CurrentTrackSegment->GetStart().x;
dy1 = g_CurrentTrackSegment->GetEnd().y - g_CurrentTrackSegment->GetStart().y;
dx0 = oldTrack->GetEnd().x - oldTrack->GetStart().x;
dy0 = oldTrack->GetEnd().y - oldTrack->GetStart().y;
if( abs( dx0 * dy1 ) == abs( dx1 * dy0 ) )
{
oldTrack->SetEnd( g_CurrentTrackSegment->GetEnd() );
delete g_CurrentTrackList.PopBack();
}
}
}
}
}
/*
* Delete dangling tracks
* Vias:
* If a via is only connected to a dangling track, it also will be removed
*/
bool TRACKS_CLEANER::deleteUnconnectedTracks()
{
if( m_Brd->m_Track == NULL )
return false;
bool modified = false;
bool item_erased = true;
while( item_erased ) // Iterate when at least one track is deleted
{
item_erased = false;
TRACK* next_track;
for( TRACK * track = m_Brd->m_Track; track ; track = next_track )
{
next_track = track->Next();
int flag_erase = 0; //Not connected indicator
int type_end = 0;
if( track->GetState( START_ON_PAD ) )
type_end |= START_ON_PAD;
if( track->GetState( END_ON_PAD ) )
type_end |= END_ON_PAD;
// if the track start point is not connected to a pad,
// test if this track start point is connected to another track
// For via test, an enhancement could be to test if connected
// to 2 items on different layers.
// Currently a via must be connected to 2 items, that can be on the same layer
LAYER_NUM top_layer, bottom_layer;
ZONE_CONTAINER* zone;
if( (type_end & START_ON_PAD ) == 0 )
{
TRACK* other = track->GetTrace( m_Brd->m_Track, NULL, FLG_START );
if( other == NULL ) // Test a connection to zones
{
if( track->Type() != PCB_VIA_T )
{
zone = m_Brd->HitTestForAnyFilledArea( track->GetStart(),
track->GetLayer(),
track->GetLayer(),
track->GetNetCode() );
}
else
{
((SEGVIA*)track)->LayerPair( &top_layer, &bottom_layer );
zone = m_Brd->HitTestForAnyFilledArea( track->GetStart(),
top_layer, bottom_layer,
track->GetNetCode() );
}
}
if( (other == NULL) && (zone == NULL) )
{
flag_erase |= 1;
}
else // segment, via or zone connected to this end
{
track->start = other;
// If a via is connected to this end,
// test if this via has a second item connected.
// If no, remove it with the current segment
if( other && other->Type() == PCB_VIA_T )
{
// search for another segment following the via
track->SetState( BUSY, true );
SEGVIA* via = (SEGVIA*) other;
other = via->GetTrace( m_Brd->m_Track, NULL, FLG_START );
if( other == NULL )
{
via->LayerPair( &top_layer, &bottom_layer );
zone = m_Brd->HitTestForAnyFilledArea( via->GetStart(),
bottom_layer,
top_layer,
via->GetNetCode() );
}
if( (other == NULL) && (zone == NULL) )
flag_erase |= 2;
track->SetState( BUSY, false );
}
}
}
// if track end point is not connected to a pad,
// test if this track end point is connected to an other track
if( (type_end & END_ON_PAD ) == 0 )
{
TRACK* other = track->GetTrace( m_Brd->m_Track, NULL, FLG_END );
if( other == NULL ) // Test a connection to zones
{
if( track->Type() != PCB_VIA_T )
{
zone = m_Brd->HitTestForAnyFilledArea( track->GetEnd(),
track->GetLayer(),
track->GetLayer(),
track->GetNetCode() );
}
else
{
((SEGVIA*)track)->LayerPair( &top_layer, &bottom_layer );
zone = m_Brd->HitTestForAnyFilledArea( track->GetEnd(),
top_layer, bottom_layer,
track->GetNetCode() );
}
}
if ( (other == NULL) && (zone == NULL) )
{
flag_erase |= 0x10;
}
else // segment, via or zone connected to this end
{
track->end = other;
// If a via is connected to this end, test if this via has a second item connected
// if no, remove it with the current segment
if( other && other->Type() == PCB_VIA_T )
{
// search for another segment following the via
track->SetState( BUSY, true );
SEGVIA* via = (SEGVIA*) other;
other = via->GetTrace( m_Brd->m_Track, NULL, FLG_END );
if( other == NULL )
{
via->LayerPair( &top_layer, &bottom_layer );
zone = m_Brd->HitTestForAnyFilledArea( via->GetEnd(),
bottom_layer, top_layer,
via->GetNetCode() );
}
if( (other == NULL) && (zone == NULL) )
flag_erase |= 0x20;
track->SetState( BUSY, false );
}
}
}
if( flag_erase )
{
// remove segment from board
track->DeleteStructure();
// iterate, because a track connected to the deleted track
// is now perhaps now not connected and should be deleted
item_erased = true;
modified = true;
}
}
}
return modified;
}
bool DIALOG_TRACK_VIA_PROPERTIES::Apply( COMMIT& aCommit )
{
if( !check() )
return false;
bool changeLock = m_lockedCbox->Get3StateValue() != wxCHK_UNDETERMINED;
bool setLock = m_lockedCbox->Get3StateValue() == wxCHK_CHECKED;
for( auto item : m_items )
{
aCommit.Modify( item );
switch( item->Type() )
{
case PCB_TRACE_T:
{
assert( m_tracks );
TRACK* t = static_cast<TRACK*>( item );
if( m_trackStartX.Valid() || m_trackStartY.Valid() )
{
wxPoint start = t->GetStart();
if( m_trackStartX.Valid() )
start.x = m_trackStartX.GetValue();
if( m_trackStartY.Valid() )
start.y = m_trackStartY.GetValue();
t->SetStart( start );
}
if( m_trackEndX.Valid() || m_trackEndY.Valid() )
{
wxPoint end = t->GetEnd();
if( m_trackEndX.Valid() )
end.x = m_trackEndX.GetValue();
if( m_trackEndY.Valid() )
end.y = m_trackEndY.GetValue();
t->SetEnd( end );
}
if( m_trackNetclass->IsChecked() )
{
t->SetWidth( t->GetNetClass()->GetTrackWidth() );
}
else if( m_trackWidth.Valid() )
{
t->SetWidth( m_trackWidth.GetValue() );
}
LAYER_NUM layer = m_TrackLayerCtrl->GetLayerSelection();
if( layer != UNDEFINED_LAYER )
t->SetLayer( (LAYER_ID) layer );
if( changeLock )
t->SetLocked( setLock );
break;
}
case PCB_VIA_T:
{
assert( m_vias );
VIA* v = static_cast<VIA*>( item );
if( m_viaX.Valid() || m_viaY.Valid() )
{
wxPoint pos = v->GetPosition();
if( m_viaX.Valid() )
pos.x = m_viaX.GetValue();
if( m_viaY.Valid() )
pos.y = m_viaY.GetValue();
v->SetPosition( pos );
}
if( m_viaNetclass->IsChecked() )
{
switch( v->GetViaType() )
{
default:
wxFAIL_MSG("Unhandled via type");
// fall through
case VIA_THROUGH:
case VIA_BLIND_BURIED:
v->SetWidth( v->GetNetClass()->GetViaDiameter() );
v->SetDrill( v->GetNetClass()->GetViaDrill() );
break;
case VIA_MICROVIA:
v->SetWidth( v->GetNetClass()->GetuViaDiameter() );
v->SetDrill( v->GetNetClass()->GetuViaDrill() );
break;
}
}
else
{
if( m_viaDiameter.Valid() )
v->SetWidth( m_viaDiameter.GetValue() );
if( m_viaDrill.Valid() )
v->SetDrill( m_viaDrill.GetValue() );
}
if( changeLock )
v->SetLocked( setLock );
break;
}
default:
assert( false );
break;
}
}
return true;
}
void GRID_HELPER::computeAnchors( BOARD_ITEM* aItem, const VECTOR2I& aRefPos )
{
VECTOR2I origin;
switch( aItem->Type() )
{
case PCB_MODULE_T:
{
MODULE* mod = static_cast<MODULE*>( aItem );
addAnchor( mod->GetPosition(), ORIGIN | SNAPPABLE, mod );
for( D_PAD* pad = mod->Pads(); pad; pad = pad->Next() )
addAnchor( pad->GetPosition(), CORNER | SNAPPABLE, pad );
break;
}
case PCB_PAD_T:
{
D_PAD* pad = static_cast<D_PAD*>( aItem );
addAnchor( pad->GetPosition(), CORNER | SNAPPABLE, pad );
break;
}
case PCB_MODULE_EDGE_T:
case PCB_LINE_T:
{
DRAWSEGMENT* dseg = static_cast<DRAWSEGMENT*>( aItem );
VECTOR2I start = dseg->GetStart();
VECTOR2I end = dseg->GetEnd();
//LAYER_ID layer = dseg->GetLayer();
switch( dseg->GetShape() )
{
case S_CIRCLE:
{
int r = ( start - end ).EuclideanNorm();
addAnchor( start, ORIGIN | SNAPPABLE, dseg );
addAnchor( start + VECTOR2I( -r, 0 ), OUTLINE | SNAPPABLE, dseg );
addAnchor( start + VECTOR2I( r, 0 ), OUTLINE | SNAPPABLE, dseg );
addAnchor( start + VECTOR2I( 0, -r ), OUTLINE | SNAPPABLE, dseg );
addAnchor( start + VECTOR2I( 0, r ), OUTLINE | SNAPPABLE, dseg );
break;
}
case S_ARC:
{
origin = dseg->GetCenter();
addAnchor( dseg->GetArcStart(), CORNER | SNAPPABLE, dseg );
addAnchor( dseg->GetArcEnd(), CORNER | SNAPPABLE, dseg );
addAnchor( origin, ORIGIN | SNAPPABLE, dseg );
break;
}
case S_SEGMENT:
{
origin.x = start.x + ( start.x - end.x ) / 2;
origin.y = start.y + ( start.y - end.y ) / 2;
addAnchor( start, CORNER | SNAPPABLE, dseg );
addAnchor( end, CORNER | SNAPPABLE, dseg );
addAnchor( origin, ORIGIN, dseg );
break;
}
default:
{
origin = dseg->GetStart();
addAnchor( origin, ORIGIN | SNAPPABLE, dseg );
break;
}
}
break;
}
case PCB_TRACE_T:
{
TRACK* track = static_cast<TRACK*>( aItem );
VECTOR2I start = track->GetStart();
VECTOR2I end = track->GetEnd();
origin.x = start.x + ( start.x - end.x ) / 2;
origin.y = start.y + ( start.y - end.y ) / 2;
addAnchor( start, CORNER | SNAPPABLE, track );
addAnchor( end, CORNER | SNAPPABLE, track );
addAnchor( origin, ORIGIN, track);
break;
}
case PCB_VIA_T:
addAnchor( aItem->GetPosition(), CORNER | SNAPPABLE, aItem );
break;
case PCB_ZONE_AREA_T:
{
const CPolyLine* outline = static_cast<const ZONE_CONTAINER*>( aItem )->Outline();
int cornersCount = outline->GetCornersCount();
SHAPE_LINE_CHAIN lc;
lc.SetClosed( true );
for( int i = 0; i < cornersCount; ++i )
{
const VECTOR2I p ( outline->GetPos( i ) );
addAnchor( p, CORNER, aItem );
lc.Append( p );
}
addAnchor( lc.NearestPoint( aRefPos ), OUTLINE, aItem );
break;
}
case PCB_MODULE_TEXT_T:
case PCB_TEXT_T:
addAnchor( aItem->GetPosition(), ORIGIN, aItem );
default:
break;
}
}
bool DIALOG_TRACK_VIA_PROPERTIES::TransferDataFromWindow()
{
auto connectivity = m_frame->GetBoard()->GetConnectivity();
int newNetCode = m_netSelector->GetSelectedNetcode();
std::vector<D_PAD*> changingPads;
if ( !m_netSelector->IsIndeterminate() )
{
std::set<D_PAD*> connectedPads;
for( auto& item : m_items )
{
const KICAD_T ourTypes[] = { PCB_TRACE_T, PCB_PAD_T, PCB_VIA_T, PCB_MODULE_T, EOT };
auto connectedItems = connectivity->GetConnectedItems( static_cast<BOARD_CONNECTED_ITEM*>( item ), ourTypes, true );
for ( auto citem : connectedItems )
{
if( citem->Type() == PCB_PAD_T )
{
connectedPads.insert( static_cast<D_PAD*>( citem ) );
}
}
}
for( D_PAD* pad : connectedPads )
{
if( pad->GetNetCode() != newNetCode )
changingPads.push_back( pad );
}
}
// Run validations:
if( changingPads.size() )
{
if( !confirmPadChange( changingPads ) )
return false;
}
if( m_vias )
{
if( !m_viaDiameter.Validate( GEOMETRY_MIN_SIZE, INT_MAX )
|| !m_viaDrill.Validate( GEOMETRY_MIN_SIZE, INT_MAX ) )
return false;
if( m_ViaDiameterCtrl->IsEnabled() && !m_viaDiameter.IsIndeterminate()
&& m_ViaDrillCtrl->IsEnabled() && !m_viaDrill.IsIndeterminate()
&& m_viaDiameter.GetValue() <= m_viaDrill.GetValue() )
{
DisplayError( GetParent(), _( "Via drill size must be smaller than via diameter" ) );
m_ViaDrillCtrl->SelectAll();
m_ViaDrillCtrl->SetFocus();
return false;
}
if( m_ViaStartLayer->GetLayerSelection() != UNDEFINED_LAYER &&
m_ViaStartLayer->GetLayerSelection() == m_ViaEndLayer->GetLayerSelection() )
{
DisplayError( GetParent(), _( "Via start layer and end layer cannot be the same" ) );
return false;
}
}
if( m_tracks )
{
if( !m_trackWidth.Validate( GEOMETRY_MIN_SIZE, INT_MAX ) )
return false;
}
// If we survived that, then save the changes:
bool changeLock = m_lockedCbox->Get3StateValue() != wxCHK_UNDETERMINED;
bool setLock = m_lockedCbox->Get3StateValue() == wxCHK_CHECKED;
for( auto item : m_items )
{
m_commit.Modify( item );
switch( item->Type() )
{
case PCB_TRACE_T:
{
wxASSERT( m_tracks );
TRACK* t = static_cast<TRACK*>( item );
if( !m_trackStartX.IsIndeterminate() )
t->SetStart( wxPoint( m_trackStartX.GetValue(), t->GetStart().y ) );
if( !m_trackStartY.IsIndeterminate() )
t->SetStart( wxPoint( t->GetStart().x, m_trackStartY.GetValue() ) );
if( !m_trackEndX.IsIndeterminate() )
t->SetEnd( wxPoint( m_trackEndX.GetValue(), t->GetEnd().y ) );
if( !m_trackEndY.IsIndeterminate() )
t->SetEnd( wxPoint( t->GetEnd().x, m_trackEndY.GetValue() ) );
if( m_trackNetclass->IsChecked() )
t->SetWidth( t->GetNetClass()->GetTrackWidth() );
else if( !m_trackWidth.IsIndeterminate() )
t->SetWidth( m_trackWidth.GetValue() );
LAYER_NUM layer = m_TrackLayerCtrl->GetLayerSelection();
if( layer != UNDEFINED_LAYER )
t->SetLayer( (PCB_LAYER_ID) layer );
if( changeLock )
t->SetLocked( setLock );
if ( !m_netSelector->IsIndeterminate() )
t->SetNetCode( m_netSelector->GetSelectedNetcode() );
break;
}
case PCB_VIA_T:
{
wxASSERT( m_vias );
VIA* v = static_cast<VIA*>( item );
if( !m_viaX.IsIndeterminate() )
v->SetPosition( wxPoint( m_viaX.GetValue(), v->GetPosition().y ) );
if( !m_viaY.IsIndeterminate() )
v->SetPosition( wxPoint( v->GetPosition().x, m_viaY.GetValue() ) );
if( m_ViaTypeChoice->GetSelection() != 3)
{
switch( m_ViaTypeChoice->GetSelection() )
{
default:
case 0: v->SetViaType( VIA_THROUGH ); v->SanitizeLayers(); break;
case 1: v->SetViaType( VIA_MICROVIA ); break;
case 2: v->SetViaType( VIA_BLIND_BURIED ); break;
}
}
auto startLayer = static_cast<PCB_LAYER_ID>( m_ViaStartLayer->GetLayerSelection() );
auto endLayer = static_cast<PCB_LAYER_ID>( m_ViaEndLayer->GetLayerSelection() );
if (startLayer != UNDEFINED_LAYER )
v->SetTopLayer( startLayer );
if (endLayer != UNDEFINED_LAYER )
v->SetBottomLayer( endLayer );
v->SanitizeLayers();
if( m_viaNetclass->IsChecked() )
{
switch( v->GetViaType() )
{
default:
wxFAIL_MSG("Unhandled via type");
// fall through
case VIA_THROUGH:
case VIA_BLIND_BURIED:
v->SetWidth( v->GetNetClass()->GetViaDiameter() );
v->SetDrill( v->GetNetClass()->GetViaDrill() );
break;
case VIA_MICROVIA:
v->SetWidth( v->GetNetClass()->GetuViaDiameter() );
v->SetDrill( v->GetNetClass()->GetuViaDrill() );
break;
}
}
else
{
if( !m_viaDiameter.IsIndeterminate() )
v->SetWidth( m_viaDiameter.GetValue() );
if( !m_viaDrill.IsIndeterminate() )
v->SetDrill( m_viaDrill.GetValue() );
}
if ( !m_netSelector->IsIndeterminate() )
v->SetNetCode( m_netSelector->GetSelectedNetcode() );
if( changeLock )
v->SetLocked( setLock );
break;
}
default:
wxASSERT( false );
break;
}
}
if ( !m_netSelector->IsIndeterminate() )
{
// Commit::Push() will rebuild connectivitiy propagating nets from connected pads
// outwards. We therefore have to update the connected pads in order for the net
// change to "stick".
for( D_PAD* pad : changingPads )
{
m_commit.Modify( pad );
pad->SetNetCode( m_netSelector->GetSelectedNetcode() );
}
}
m_commit.Push( _( "Edit track/via properties" ) );
return true;
}
/* Init variables (slope, Y intersect point, flags) for
* Show_Drag_Track_Segment_With_Cte_Slope()
* return true if Ok, false if dragging is not possible
* (2 colinear segments)
*/
bool InitialiseDragParameters()
{
double tx1, tx2, ty1, ty2; // temporary storage of points
TRACK* Track;
TRACK* tSegmentToStart = NULL, * tSegmentToEnd = NULL;
if( g_DragSegmentList.size() == 0 )
return false;
/* get the segments :
* from last to first in list are:
* the segment to move
* the segment connected to its end point (if exists)
* the segment connected to its start point (if exists)
*/
int ii = g_DragSegmentList.size() - 1;
Track = g_DragSegmentList[ii].m_Track;
if( Track == NULL )
return false;
ii--;
if( ii >= 0)
{
if( s_EndSegmentPresent )
{
tSegmentToEnd = g_DragSegmentList[ii].m_Track; // Get the segment connected to
// the end point
ii--;
}
if( s_StartSegmentPresent )
{
if( ii >= 0 )
tSegmentToStart = g_DragSegmentList[ii].m_Track; // Get the segment connected to
// the start point
}
}
// would be nice to eliminate collinear segments here, so we don't
// have to deal with that annoying "Unable to drag this segment: two
// collinear segments"
s_StartPointVertical = false;
s_EndPointVertical = false;
s_MovingSegmentVertical = false;
s_StartPointHorizontal = false;
s_EndPointHorizontal = false;
s_MovingSegmentHorizontal = false;
// Init parameters for the starting point of the moved segment
if( tSegmentToStart )
{
if( tSegmentToStart->GetFlags() & ENDPOINT )
{
tx1 = (double) tSegmentToStart->GetStart().x;
ty1 = (double) tSegmentToStart->GetStart().y;
tx2 = (double) tSegmentToStart->GetEnd().x;
ty2 = (double) tSegmentToStart->GetEnd().y;
}
else
{
tx1 = (double) tSegmentToStart->GetEnd().x;
ty1 = (double) tSegmentToStart->GetEnd().y;
tx2 = (double) tSegmentToStart->GetStart().x;
ty2 = (double) tSegmentToStart->GetStart().y;
}
}
else // move the start point on a line starting at Track->GetStart(), and perpendicular to Track
{
tx1 = (double) Track->GetStart().x;
ty1 = (double) Track->GetStart().y;
tx2 = (double) Track->GetEnd().x;
ty2 = (double) Track->GetEnd().y;
RotatePoint( &tx2, &ty2, tx1, ty1, 900 );
}
if( tx1 != tx2 )
{
s_StartSegmentSlope = ( ty2 - ty1 ) / ( tx2 - tx1 );
s_StartSegment_Yorg = ty1 - ( ty2 - ty1 ) * tx1 / ( tx2 - tx1 );
}
else
{
s_StartPointVertical = true; //signal first segment vertical
}
if( ty1 == ty2 )
{
s_StartPointHorizontal = true;
}
// Init parameters for the ending point of the moved segment
if( tSegmentToEnd )
{
//check if second line is vertical
if( tSegmentToEnd->GetFlags() & STARTPOINT )
{
tx1 = (double) tSegmentToEnd->GetStart().x;
ty1 = (double) tSegmentToEnd->GetStart().y;
tx2 = (double) tSegmentToEnd->GetEnd().x;
ty2 = (double) tSegmentToEnd->GetEnd().y;
}
else
{
tx1 = (double) tSegmentToEnd->GetEnd().x;
ty1 = (double) tSegmentToEnd->GetEnd().y;
tx2 = (double) tSegmentToEnd->GetStart().x;
ty2 = (double) tSegmentToEnd->GetStart().y;
}
}
else // move the start point on a line starting at Track->GetEnd(), and perpendicular to Track
{
tx1 = (double) Track->GetEnd().x;
ty1 = (double) Track->GetEnd().y;
tx2 = (double) Track->GetStart().x;
ty2 = (double) Track->GetStart().y;
RotatePoint( &tx2, &ty2, tx1, ty1, -900 );
}
if( tx2 != tx1 )
{
s_EndSegmentSlope = ( ty2 - ty1 ) / ( tx2 - tx1 );
s_EndSegment_Yorg = ty1 - ( ty2 - ty1 ) * tx1 / ( tx2 - tx1 );
}
else
{
s_EndPointVertical = true; //signal second segment vertical
}
if( ty1 == ty2 )
{
s_EndPointHorizontal = true;
}
// Init parameters for the moved segment
tx1 = (double) Track->GetStart().x;
ty1 = (double) Track->GetStart().y;
tx2 = (double) Track->GetEnd().x;
ty2 = (double) Track->GetEnd().y;
if( tx2 != tx1 )
{
s_MovingSegmentSlope = ( ty2 - ty1 ) / ( tx2 - tx1 );
}
else
{
s_MovingSegmentVertical = true; // signal vertical line
}
if( ty1 == ty2 )
{
s_MovingSegmentHorizontal = true;
}
// Test if drag is possible:
if( s_MovingSegmentVertical )
{
if( s_EndPointVertical || s_StartPointVertical )
return false;
}
else
{
if( !s_EndPointVertical && ( s_MovingSegmentSlope == s_EndSegmentSlope ) )
return false;
if( !s_StartPointVertical && ( s_MovingSegmentSlope == s_StartSegmentSlope ) )
return false;
}
return true;
}
void BOARD_ITEM::SwapData( BOARD_ITEM* aImage )
{
if( aImage == NULL )
{
return;
}
EDA_ITEM * pnext = Next();
EDA_ITEM * pback = Back();
switch( Type() )
{
case PCB_MODULE_T:
{
MODULE* tmp = (MODULE*) aImage->Clone();
( (MODULE*) aImage )->Copy( (MODULE*) this );
( (MODULE*) this )->Copy( tmp );
delete tmp;
}
break;
case PCB_ZONE_AREA_T:
{
ZONE_CONTAINER* tmp = (ZONE_CONTAINER*) aImage->Clone();
( (ZONE_CONTAINER*) aImage )->Copy( (ZONE_CONTAINER*) this );
( (ZONE_CONTAINER*) this )->Copy( tmp );
delete tmp;
}
break;
case PCB_LINE_T:
std::swap( *((DRAWSEGMENT*)this), *((DRAWSEGMENT*)aImage) );
break;
case PCB_TRACE_T:
case PCB_VIA_T:
{
TRACK* track = (TRACK*) this;
TRACK* image = (TRACK*) aImage;
EXCHG(track->m_Layer, image->m_Layer );
// swap start, end, width and shape for track and image.
wxPoint exchp = track->GetStart();
track->SetStart( image->GetStart() );
image->SetStart( exchp );
exchp = track->GetEnd();
track->SetEnd( image->GetEnd() );
image->SetEnd( exchp );
int atmp = track->GetWidth();
track->SetWidth( image->GetWidth() );
image->SetWidth( atmp );
if( Type() == PCB_VIA_T )
{
VIA *via = static_cast<VIA*>( this );
VIA *viaimage = static_cast<VIA*>( aImage );
VIATYPE_T viatmp = via->GetViaType();
via->SetViaType( viaimage->GetViaType() );
viaimage->SetViaType( viatmp );
int drilltmp = via->GetDrillValue();
if( via->IsDrillDefault() )
drilltmp = -1;
int itmp = viaimage->GetDrillValue();
if( viaimage->IsDrillDefault() )
itmp = -1;
EXCHG(itmp, drilltmp );
if( drilltmp > 0 )
via->SetDrill( drilltmp );
else
via->SetDrillDefault();
if( itmp > 0 )
viaimage->SetDrill( itmp );
else
viaimage->SetDrillDefault();
}
}
break;
case PCB_TEXT_T:
std::swap( *((TEXTE_PCB*)this), *((TEXTE_PCB*)aImage) );
break;
case PCB_TARGET_T:
std::swap( *((PCB_TARGET*)this), *((PCB_TARGET*)aImage) );
break;
case PCB_DIMENSION_T:
std::swap( *((DIMENSION*)this), *((DIMENSION*)aImage) );
break;
case PCB_ZONE_T:
default:
wxLogMessage( wxT( "SwapData() error: unexpected type %d" ), Type() );
break;
}
if( pnext != Next() || pback != Back() )
{
Pnext = pnext;
Pback = pback;
#ifdef DEBUG
wxLogMessage( wxT( "SwapData Error: %s Pnext or Pback pointers modified" ),
GetClass().GetData() );
#endif
}
}