//
// Read the toolbar states
//
void ToolManager::ReadConfig()
{
wxString oldpath = gPrefs->GetPath();
wxArrayInt unordered[ DockCount ];
int order[ DockCount ][ ToolBarCount ];
bool show[ ToolBarCount ];
int width[ ToolBarCount ];
int height[ ToolBarCount ];
int x, y;
int dock, ord, ndx;
#if defined(__WXMAC__)
// Disable window animation
wxSystemOptions::SetOption( wxMAC_WINDOW_PLAIN_TRANSITION, 1 );
#endif
// Invalidate all order entries
for( dock = 0; dock < DockCount; dock++ )
{
for( ord = 0; ord < ToolBarCount; ord++ )
{
order[ dock ][ ord ] = NoBarID;
}
}
// Change to the bar root
gPrefs->SetPath( wxT("/GUI/ToolBars") );
// Load and apply settings for each bar
for( ndx = 0; ndx < ToolBarCount; ndx++ )
{
ToolBar *bar = mBars[ ndx ];
// Change to the bar subkey
gPrefs->SetPath( bar->GetSection() );
// Read in all the settings
gPrefs->Read( wxT("Dock"), &dock, ndx == SelectionBarID ? BotDockID : TopDockID );
gPrefs->Read( wxT("Order"), &ord, NoBarID );
gPrefs->Read( wxT("Show"), &show[ ndx ], true );
gPrefs->Read( wxT("X"), &x, -1 );
gPrefs->Read( wxT("Y"), &y, -1 );
gPrefs->Read( wxT("W"), &width[ ndx ], -1 );
gPrefs->Read( wxT("H"), &height[ ndx ], -1 );
// Docked or floating?
if( dock )
{
// Default to top dock if the ID isn't valid
if( dock < NoDockID || dock > DockCount ) {
dock = TopDockID;
}
// Create the bar with the correct parent
if( dock == TopDockID )
{
bar->Create( mTopDock );
}
else
{
bar->Create( mBotDock );
}
#ifdef EXPERIMENTAL_SYNC_LOCK
// Set the width
if( width[ ndx ] >= bar->GetSize().x )
{
wxSize sz( width[ ndx ], bar->GetSize().y );
bar->SetSize( sz );
bar->Layout();
}
#else
// note that this section is here because if you had been using sync-lock and now you aren't,
// the space for the extra button is stored in audacity.cfg, and so you get an extra space
// in the EditToolbar.
// It is needed so that the meterToolbar size gets preserved.
// Longer-term we should find a better fix for this.
wxString thisBar = bar->GetSection();
if( thisBar != wxT("Edit"))
{
// Set the width
if( width[ ndx ] >= bar->GetSize().x )
{
wxSize sz( width[ ndx ], bar->GetSize().y );
bar->SetSize( sz );
bar->Layout();
}
}
#endif
// Is order within range and unoccupied?
if( ( ord >= 0 ) &&
( ord < ToolBarCount ) &&
( order[ dock - 1 ][ ord ] == NoBarID ) )
{
// Insert at ordered location
order[ dock - 1 ][ ord ] = ndx;
}
else
{
// These must go at the end
unordered[ dock - 1 ].Add( ndx );
}
}
else
{
// Create the bar (with the top dock being temporary parent)
bar->Create( mTopDock );
// Construct a new floater
ToolFrame *f = new ToolFrame( mParent, this, bar, wxPoint( x, y ) );
// Set the width and height
if( width[ ndx ] != -1 && height[ ndx ] != -1 )
{
wxSize sz( width[ ndx ], height[ ndx ] );
f->SetSizeHints( sz );
f->SetSize( sz );
f->Layout();
}
// Show or hide it
bar->Expose( show[ ndx ] );
// Inform toolbar of change
bar->SetDocked( NULL, false );
}
// Change back to the bar root
//gPrefs->SetPath( wxT("..") ); <-- Causes a warning...
// May or may not have gone into a subdirectory,
// so use an absolute path.
gPrefs->SetPath( wxT("/GUI/ToolBars") );
}
// Add all toolbars to their target dock
for( dock = 0; dock < DockCount; dock++ )
{
ToolDock *d = ( dock + 1 == TopDockID ? mTopDock : mBotDock );
// Add all ordered toolbars
for( ord = 0; ord < ToolBarCount; ord++ )
{
ndx = order[ dock ][ ord ];
// Bypass empty slots
if( ndx != NoBarID )
{
ToolBar *t = mBars[ ndx ];
// Dock it
d->Dock( t );
// Hide the bar
if( !show[ t->GetId() ] )
{
d->ShowHide( t->GetId() );
}
}
}
// Add all unordered toolbars
for( ord = 0; ord < (int) unordered[ dock ].GetCount(); ord++ )
{
ToolBar *t = mBars[ unordered[ dock ][ ord ] ];
// Dock it
d->Dock( t );
// Hide the bar
if( !show[ t->GetId() ] )
{
d->ShowHide( t->GetId() );
}
}
}
// Restore original config path
gPrefs->SetPath( oldpath );
#if defined(__WXMAC__)
// Reinstate original transition
wxSystemOptions::SetOption( wxMAC_WINDOW_PLAIN_TRANSITION, mTransition );
#endif
}
//
// Read the toolbar states
//
void ToolManager::ReadConfig()
{
wxString oldpath = gPrefs->GetPath();
wxArrayInt unordered[ DockCount ];
bool show[ ToolBarCount ];
int width[ ToolBarCount ];
int height[ ToolBarCount ];
int x, y;
int dock, ndx;
bool someFound { false };
#if defined(__WXMAC__)
// Disable window animation
wxSystemOptions::SetOption( wxMAC_WINDOW_PLAIN_TRANSITION, 1 );
#endif
// Change to the bar root
gPrefs->SetPath( wxT("/GUI/ToolBars") );
ToolBarConfiguration::Legacy topLegacy, botLegacy;
// Load and apply settings for each bar
for( ndx = 0; ndx < ToolBarCount; ndx++ )
{
ToolBar *bar = mBars[ ndx ].get();
//wxPoint Center = mParent->GetPosition() + (mParent->GetSize() * 0.33);
//wxPoint Center(
// wxSystemSettings::GetMetric( wxSYS_SCREEN_X ) /2 ,
// wxSystemSettings::GetMetric( wxSYS_SCREEN_Y ) /2 );
// Change to the bar subkey
gPrefs->SetPath( bar->GetSection() );
bool bShownByDefault = true;
int defaultDock = TopDockID;
if( ndx == SelectionBarID )
defaultDock = BotDockID;
if( ndx == MeterBarID )
bShownByDefault = false;
if( ndx == ScrubbingBarID )
bShownByDefault = false;
#ifdef EXPERIMENTAL_SPECTRAL_EDITING
if( ndx == SpectralSelectionBarID ){
defaultDock = BotDockID;
bShownByDefault = false; // Only show if asked for.
}
#endif
// Read in all the settings
gPrefs->Read( wxT("Dock"), &dock, -1);
const bool found = (dock != -1);
if (found)
someFound = true;
if (!found)
dock = defaultDock;
ToolDock *d;
ToolBarConfiguration::Legacy *pLegacy;
switch(dock)
{
case TopDockID: d = mTopDock; pLegacy = &topLegacy; break;
case BotDockID: d = mBotDock; pLegacy = &botLegacy; break;
default: d = nullptr; pLegacy = nullptr; break;
}
bool ordered = ToolBarConfiguration::Read
(d ? &d->GetConfiguration() : nullptr,
pLegacy,
bar, show[ ndx ], bShownByDefault)
&& found;
gPrefs->Read( wxT("X"), &x, -1 );
gPrefs->Read( wxT("Y"), &y, -1 );
gPrefs->Read( wxT("W"), &width[ ndx ], -1 );
gPrefs->Read( wxT("H"), &height[ ndx ], -1 );
bar->SetVisible( show[ ndx ] );
// Docked or floating?
if( dock )
{
// Default to top dock if the ID isn't valid
if( dock < NoDockID || dock > DockCount ) {
dock = TopDockID;
}
// Create the bar with the correct parent
if( dock == TopDockID )
{
bar->Create( mTopDock );
}
else
{
bar->Create( mBotDock );
}
// Set the width and height
if( width[ ndx ] != -1 && height[ ndx ] != -1 )
{
wxSize sz( width[ ndx ], height[ ndx ] );
bar->SetSize( sz );
}
#ifdef EXPERIMENTAL_SYNC_LOCK
// Set the width
if( width[ ndx ] >= bar->GetSize().x )
{
wxSize sz( width[ ndx ], bar->GetSize().y );
bar->SetSize( sz );
bar->Layout();
}
#else
// note that this section is here because if you had been using sync-lock and now you aren't,
// the space for the extra button is stored in audacity.cfg, and so you get an extra space
// in the EditToolbar.
// It is needed so that the meterToolbar size gets preserved.
// Longer-term we should find a better fix for this.
wxString thisBar = bar->GetSection();
if( thisBar != wxT("Edit"))
{
// Set the width
if( width[ ndx ] >= bar->GetSize().x )
{
wxSize sz( width[ ndx ], bar->GetSize().y );
bar->SetSize( sz );
bar->Layout();
}
}
#endif
if (!ordered)
{
// These must go at the end
unordered[ dock - 1 ].Add( ndx );
}
}
else
{
// Create the bar (with the top dock being temporary parent)
bar->Create( mTopDock );
// Construct a NEW floater
wxASSERT(mParent);
ToolFrame *f = safenew ToolFrame( mParent, this, bar, wxPoint( x, y ) );
// Set the width and height
if( width[ ndx ] != -1 && height[ ndx ] != -1 )
{
wxSize sz( width[ ndx ], height[ ndx ] );
f->SetSizeHints( sz );
f->SetSize( sz );
f->Layout();
if( (x!=-1) && (y!=-1) )
bar->SetPositioned();
}
// Required on Linux Xfce
wxSize msz(width[ndx],height[ndx]-1);
bar->GetParent()->SetMinSize(msz);
// Inform toolbar of change
bar->SetDocked( NULL, false );
// Show or hide it
Expose( ndx, show[ ndx ] );
}
// Change back to the bar root
//gPrefs->SetPath( wxT("..") ); <-- Causes a warning...
// May or may not have gone into a subdirectory,
// so use an absolute path.
gPrefs->SetPath( wxT("/GUI/ToolBars") );
}
mTopDock->GetConfiguration().PostRead(topLegacy);
mBotDock->GetConfiguration().PostRead(botLegacy);
// Add all toolbars to their target dock
for( dock = 0; dock < DockCount; dock++ )
{
ToolDock *d = ( dock + 1 == TopDockID ? mTopDock : mBotDock );
d->LoadConfig();
// Add all unordered toolbars
bool deviceWasPositioned = false;
for( int ord = 0; ord < (int) unordered[ dock ].GetCount(); ord++ )
{
ToolBar *t = mBars[ unordered[ dock ][ ord ] ].get();
if (deviceWasPositioned &&
t->GetType() == DeviceBarID)
continue;
if (someFound &&
t->GetType() == ScrubbingBarID) {
// Special case code to put the NEW scrubbing toolbar where we
// want it, when audacity.cfg is present from an older version
ToolBar *lastRoot {};
// Change from the ideal configuration to the constrained one,
// just as when dragging and dropping
ToolBarConfiguration dummy;
mTopDock->WrapConfiguration(dummy);
// Start a NEW row with just the scrubbing toolbar
auto &configuration = mTopDock->GetConfiguration();
for (const auto place : configuration)
if (place.position.rightOf == nullptr)
lastRoot = place.pTree->pBar;
ToolBarConfiguration::Position position {
nullptr, lastRoot, false
};
mTopDock->Dock(t, false, position);
// Reposition the device toolbar, if it was docked above,
// right of scrubbing
const auto deviceToolBar = mBars[ DeviceBarID ].get();
if (deviceToolBar->GetDock() == mTopDock) {
deviceToolBar->GetDock()->Undock(deviceToolBar);
position = { t, nullptr };
mTopDock->Dock(deviceToolBar, false, position);
// Remember not to place the device toolbar again
deviceWasPositioned = true;
}
Expose( t->GetId(), show[ t->GetId() ] );
continue;
}
// Dock it
d->Dock( t, false );
// Show or hide the bar
Expose( t->GetId(), show[ t->GetId() ] );
}
}
// Restore original config path
gPrefs->SetPath( oldpath );
#if defined(__WXMAC__)
// Reinstate original transition
wxSystemOptions::SetOption( wxMAC_WINDOW_PLAIN_TRANSITION, mTransition );
#endif
if (!someFound)
Reset();
}
