Example #1
0
void
vpTriangle::init(const vpImagePoint &iP1, const vpImagePoint &iP2, const vpImagePoint &iP3)
{
  apex1 = iP1;
  apex2 = iP2;
  apex3 = iP3;
  
  vpMatrix uv(2,2);
  vpMatrix uvinv(2,2);

  uv[0][0] = iP2.get_i() - iP1.get_i();
  uv[1][0] = iP3.get_i() - iP1.get_i();
  uv[0][1] = iP2.get_j() - iP1.get_j();
  uv[1][1] = iP3.get_j() - iP1.get_j();
  try
  {
    uvinv=uv.inverseByLU();
    goodTriange = true;
  }
  catch(...)
  {
    goodTriange = false;
    std::cout<<"Empty triangle"<<std::endl;
  }
  
  uvinv00=uvinv[0][0];
  uvinv01=uvinv[0][1];
  uvinv10=uvinv[1][0];
  uvinv11=uvinv[1][1];
  S1 = iP1;
}
Example #2
0
void
vpPlotCurve::plotPoint(const vpImage<unsigned char> &I, const vpImagePoint &iP, const double x, const double y)
{  
  nbPoint++;
  
  if (nbPoint > 1)
  {
    vpDisplay::displayLine(I,lastPoint, iP, color, thickness);
  }
#if defined (VISP_HAVE_DISPLAY)
  double top;
  double left;
  double width;
  double height;
  
  if (iP.get_i() <= lastPoint.get_i()) {top = iP.get_i()-5; height = lastPoint.get_i() - top+10;}
  else {top = lastPoint.get_i()-5; height = iP.get_i() - top+10;}
  if (iP.get_j() <= lastPoint.get_j()) {left = iP.get_j()-5; width = lastPoint.get_j() - left+10;}
  else {left = lastPoint.get_j()-5; width = iP.get_j() - left+10;}
  vpDisplay::flushROI(I,vpRect(left,top,width,height));
#endif
  lastPoint = iP;
  pointListx.push_back(x);
  pointListy.push_back(y);
  pointListz.push_back(0.0);
}
Example #3
0
/*!

  Computes the SURF points in only a part of the current image I and
  try to matched them with the points in the reference list. The part
  of the image is a rectangle defined by its top left corner, its
  height and its width. The parameters of this rectangle must be given
  in pixel. Only the matched points are stored.

  \param I : The gray scaled image where the points are computed.

  \param iP : The top left corner of the rectangle.

  \param height : height of the rectangle (in pixel).

  \param width : width of the rectangle (in pixel).

  \return the number of point which have been matched.
*/
unsigned int vpKeyPointSurf::matchPoint(const vpImage<unsigned char> &I,
			       const vpImagePoint &iP,
			       const unsigned int height, const unsigned int width)
{
  if((iP.get_i()+height) >= I.getHeight()
     || (iP.get_j()+width) >= I.getWidth())
  {
    vpTRACE("Bad size for the subimage");
    throw(vpException(vpImageException::notInTheImage ,
		      "Bad size for the subimage"));
  }

  vpImage<unsigned char> subImage;

  vpImageTools::createSubImage(I,
			       (unsigned int)iP.get_i(),
			       (unsigned int)iP.get_j(),
			       height, width, subImage);

  unsigned int nbMatchedPoint = this->matchPoint(subImage);

  for(unsigned int k = 0; k < nbMatchedPoint; k++)
  {
    (currentImagePointsList[k]).set_i((currentImagePointsList[k]).get_i()
				      + iP.get_i());
    (currentImagePointsList[k]).set_j((currentImagePointsList[k]).get_j()
				      + iP.get_j());
  }

  return(nbMatchedPoint);
}
Example #4
0
/*
  Compute the distance d = |Pw1-Pw2|
*/
inline double distance(const vpImagePoint &iP1, const double w1, const vpImagePoint &iP2, const double w2)
{
  double distancei = iP1.get_i() - iP2.get_i();
  double distancej = iP1.get_j() - iP2.get_j();
  double distancew = w1 -w2;
  return sqrt(vpMath::sqr(distancei)+vpMath::sqr(distancej)+vpMath::sqr(distancew));
}
Example #5
0
bool fromTo(const vpImagePoint &from, const vpImagePoint &to, vpDirection &direction) {
  if (from == to) {
    return false;
  }

  if ( std::fabs(from.get_i() - to.get_i()) < std::numeric_limits<double>::epsilon() ) {
    if (from.get_j() < to.get_j()) {
      direction.m_direction = EAST;
    } else {
      direction.m_direction = WEST;
    }
  } else if (from.get_i() < to.get_i()) {
    if ( std::fabs(from.get_j() - to.get_j()) < std::numeric_limits<double>::epsilon() ) {
      direction.m_direction = SOUTH;
    } else if (from.get_j() < to.get_j()) {
      direction.m_direction = SOUTH_EAST;
    } else {
      direction.m_direction = SOUTH_WEST;
    }
  } else {
    if ( std::fabs(from.get_j() - to.get_j()) < std::numeric_limits<double>::epsilon() ) {
      direction.m_direction = NORTH;
    } else if (from.get_j() < to.get_j()) {
      direction.m_direction = NORTH_EAST;
    } else {
      direction.m_direction = NORTH_WEST;
    }
  }

  return true;
}
Example #6
0
void
vpPlotCurve::plotPoint(vpImage<unsigned char> &I, vpImagePoint iP, const double x, const double y)
{
  pointListx.end();
  pointListy.end();
  pointListz.end();
  
  nbPoint++;
  
  if (nbPoint > 1)
  {
    vpDisplay::displayLine(I,lastPoint, iP, color);
  }
#if( defined VISP_HAVE_X11 || defined VISP_HAVE_GDI )
  double top;
  double left;
  double width;
  double height;
  
  if (iP.get_i() <= lastPoint.get_i()) {top = iP.get_i()-5; height = lastPoint.get_i() - top+10;}
  else {top = lastPoint.get_i()-5; height = iP.get_i() - top+10;}
  if (iP.get_j() <= lastPoint.get_j()) {left = iP.get_j()-5; width = lastPoint.get_j() - left+10;}
  else {left = lastPoint.get_j()-5; width = iP.get_j() - left+10;}
  vpDisplay::flushROI(I,vpRect(left,top,width,height));
#endif
  lastPoint = iP;
  pointListx.addRight(x);
  pointListy.addRight(y);
  pointListz.addRight(0.0);
}
Example #7
0
/*!
  Computes the \f$ alpha \f$ angle of the two points and store them into alpha1 for the smallest and alpha2 for the biggest.

  \note this function is useful only during the initialization.

  \param pt1 : First point whose \f$ alpha \f$ angle is computed.
  \param pt2 : Second point whose \f$ alpha \f$ angle is computed.
*/ 
void
vpMeEllipse::computeAngle(vpImagePoint pt1, vpImagePoint pt2)
{

  getParameters() ;
  double j1, i1, j11, i11;
  j1 =  i1 =  0.0 ;

  int number_of_points = 2000 ;
  double incr = 2 * M_PI / number_of_points ; // angle increment

  double dmin1 = 1e6  ;
  double dmin2 = 1e6  ;

  double k =  0 ;
  while(k < 2*M_PI) {

//     j1 = a *cos(k) ; // equation of an ellipse
//     i1 = b *sin(k) ; // equation of an ellipse

    j1 = a *sin(k) ; // equation of an ellipse
    i1 = b *cos(k) ; // equation of an ellipse

    // (i1,j1) are the coordinates on the origin centered ellipse ;
    // a rotation by "e" and a translation by (xci,jc) are done
    // to get the coordinates of the point on the shifted ellipse
//     j11 = iPc.get_j() + ce *j1 - se *i1 ;
//     i11 = iPc.get_i() -( se *j1 + ce *i1) ;

    j11 = iPc.get_j() + ce *j1 + se *i1 ;
    i11 = iPc.get_i() - se *j1 + ce *i1 ;

    double  d = vpMath::sqr(pt1.get_i()-i11) + vpMath::sqr(pt1.get_j()-j11) ;
    if (d < dmin1)
    {
      dmin1 = d ;
      alpha1 = k ;
    }
    d = vpMath::sqr(pt2.get_i()-i11) + vpMath::sqr(pt2.get_j()-j11) ;
    if (d < dmin2)
    {
      dmin2 = d ;
      alpha2 = k ;
    }
    k += incr ;
  }
  //std::cout << "end vpMeEllipse::computeAngle(..)" << alpha1 << "  " << alpha2 << std::endl ;

  if (alpha2 < alpha1)
    alpha2 += 2 * M_PI;
  //else if (alpha2 == alpha1)
  else if (std::fabs(alpha2 - alpha1) < std::fabs(alpha1) * std::numeric_limits<double>::epsilon())
    alpha2 += 2 * M_PI;

  //std::cout << "end vpMeEllipse::computeAngle(..)" << alpha1 << "  " << alpha2 << std::endl ;
  
  
}
/*!
  Display a selection of the gray level image \e I (8bits).

  \warning Display has to be initialized.

  \warning Suppress the overlay drawing in the region of interest.

  \param I : Image to display.
  
  \param iP : Top left corner of the region of interest
  
  \param width : Width of the region of interest
  
  \param height : Height of the region of interest

  \sa init(), closeDisplay()
*/
void vpDisplayOpenCV::displayImageROI ( const vpImage<unsigned char> &I,const vpImagePoint &iP, const unsigned int width, const unsigned int height )
{
  if (displayHasBeenInitialized)
  { 
    vpImage<unsigned char> Itemp;
    vpImageTools::createSubImage(I,(unsigned int)iP.get_i(),(unsigned int)iP.get_j(),height,width,Itemp);
    vpImage<vpRGBa> Ic;
    vpImageConvert::convert(Itemp,Ic);
    
    CvSize size = cvSize((int)this->width, (int)this->height);
    int depth = 8;
    int channels = 3;
    if (background != NULL){
      if(background->nChannels != channels || background->depth != depth
         || background->height != (int) I.getHeight() || background->width != (int) I.getWidth()){
        if(background->nChannels != 0) cvReleaseImage(&background);
        background = cvCreateImage( size, depth, channels );
      }
    }
    else background = cvCreateImage( size, depth, channels );
    
    IplImage* Ip = NULL;
    vpImageConvert::convert(Ic, Ip);
    
    unsigned char * input = (unsigned char*)Ip->imageData;
    unsigned char * output = (unsigned char*)background->imageData;
    
    unsigned int iwidth = Ic.getWidth();

    input = input;
    output = output + (int)(iP.get_i()*3*this->width+ iP.get_j()*3);
    
    unsigned int i = 0;
    while (i < height)
    {
      unsigned int j = 0;
      while (j < width)
      {
	*(output+3*j) = *(input+j*3);
	*(output+3*j+1) = *(input+j*3+1);
	*(output+3*j+2) = *(input+j*3+2);
	j++;
      }
      input = input + 3*iwidth;
      output = output + 3*this->width;
      i++;
    }

    cvReleaseImage(&Ip);
  }
  else
  {
    vpERROR_TRACE("openCV not initialized " ) ;
    throw(vpDisplayException(vpDisplayException::notInitializedError,
                             "OpenCV not initialized")) ;
  }
}
Example #9
0
/*!
  Display an arrow from image point \e ip1 to image point \e ip2.
  \param ip1,ip2 : Initial and final image point.
  \param color : Arrow color.
  \param w,h : Width and height of the arrow.
  \param thickness : Thickness of the lines used to display the arrow.
*/
void vpDisplayGTK::displayArrow ( const vpImagePoint &ip1, 
                                  const vpImagePoint &ip2,
                                  const vpColor &color,
                                  unsigned int w, unsigned int h,
                                  unsigned int thickness)
{
  if (displayHasBeenInitialized)
  {
    try{
      double a = ip2.get_i() - ip1.get_i() ;
      double b = ip2.get_j() - ip1.get_j() ;
      double lg = sqrt(vpMath::sqr(a)+vpMath::sqr(b)) ;

      //if ((a==0)&&(b==0))
      if ((std::fabs(a) <= std::numeric_limits<double>::epsilon() )&&(std::fabs(b) <= std::numeric_limits<double>::epsilon()) )
      {
        // DisplayCrossLarge(i1,j1,3,col) ;
      }
      else
      {
        a /= lg ;
        b /= lg ;

        vpImagePoint ip3;
        ip3.set_i(ip2.get_i() - w*a);
        ip3.set_j(ip2.get_j() - w*b);

        vpImagePoint ip4;
        ip4.set_i( ip3.get_i() - b*h );
        ip4.set_j( ip3.get_j() + a*h );

        if (lg > 2*vpImagePoint::distance(ip2, ip4) )
          displayLine ( ip2, ip4, color, thickness ) ;
        
        ip4.set_i( ip3.get_i() + b*h );
        ip4.set_j( ip3.get_j() - a*h );

        if (lg > 2*vpImagePoint::distance(ip2, ip4) )
          displayLine ( ip2, ip4, color, thickness ) ;

        displayLine ( ip1, ip2, color, thickness ) ;
      }
    }
    catch (...)
    {
      vpERROR_TRACE("Error caught") ;
      throw ;
    }
  }
  else
  {
    vpERROR_TRACE("GTK not initialized " ) ;
    throw(vpDisplayException(vpDisplayException::notInitializedError,
                             "GTK not initialized")) ;
  }
}
Example #10
0
/*!

  Display of the ellipse thanks to the equation parameters.

  \param I : The image used as background.

  \param center : Center of the ellipse

  \param A : Semiminor axis of the ellipse.

  \param B : Semimajor axis of the ellipse.

  \param E : Angle made by the major axis and the i axis of the image frame \f$ (i,j) \f$

  \param smallalpha : Smallest \f$ alpha \f$ angle in rad.

  \param highalpha : Highest \f$ alpha \f$ angle in rad.

  \param color : Color used to display th lines.

  \param thickness : Thickness of the drawings.
*/
void vpMeEllipse::display(const vpImage<vpRGBa>& I, const vpImagePoint &center,
                          const double &A, const double &B, const double &E,
                          const double & smallalpha, const double &highalpha,
                          const vpColor &color, unsigned int thickness)
{
  double j1, i1;
  vpImagePoint iP11;
  double j2, i2;
  vpImagePoint iP22;
  j1 = j2 = i1 = i2 = 0 ;

  double incr = vpMath::rad(2) ; // angle increment

  vpDisplay::displayCross(I,center,20, vpColor::red, thickness) ;

  double k = smallalpha ;
  while (k+incr<highalpha)
  {
    j1 = A *cos(k) ; // equation of an ellipse
    i1 = B *sin(k) ; // equation of an ellipse

    j2 = A *cos(k+incr) ; // equation of an ellipse
    i2 = B *sin(k+incr) ; // equation of an ellipse

    // (i1,j1) are the coordinates on the origin centered ellipse ;
    // a rotation by "e" and a translation by (xci,jc) are done
    // to get the coordinates of the point on the shifted ellipse
    iP11.set_j ( center.get_j() + cos(E) *j1 - sin(E) *i1 );
    iP11.set_i ( center.get_i() -( sin(E) *j1 + cos(E) *i1) );
    // to get the coordinates of the point on the shifted ellipse
    iP22.set_j ( center.get_j() + cos(E) *j2 - sin(E) *i2 );
    iP22.set_i ( center.get_i() -( sin(E) *j2 + cos(E) *i2) );

    vpDisplay::displayLine(I, iP11, iP22, color, thickness) ;

    k += incr ;
  }

  j1 = A *cos(smallalpha) ; // equation of an ellipse
  i1 = B *sin(smallalpha) ; // equation of an ellipse

  j2 = A *cos(highalpha) ; // equation of an ellipse
  i2 = B *sin(highalpha) ; // equation of an ellipse

  // (i1,j1) are the coordinates on the origin centered ellipse ;
  // a rotation by "e" and a translation by (xci,jc) are done
  // to get the coordinates of the point on the shifted ellipse
  iP11.set_j ( center.get_j() + cos(E) *j1 - sin(E) *i1 );
  iP11.set_i ( center.get_i() -( sin(E) *j1 + cos(E) *i1) );
  // to get the coordinates of the point on the shifted ellipse
  iP22.set_j ( center.get_j() + cos(E) *j2 - sin(E) *i2 );
  iP22.set_i ( center.get_i() -( sin(E) *j2 + cos(E) *i2) );

  vpDisplay::displayLine(I, center, iP11, vpColor::red, thickness) ;
  vpDisplay::displayLine(I, center, iP22, vpColor::blue, thickness) ;
}
Example #11
0
/*!  
  Display a rectangle.

  \param topLeft : Top-left corner of the rectangle.
  \param bottomRight : Bottom-right corner of the rectangle.
  \param color : Rectangle color.
  \param fill : When set to true fill the rectangle.
  \param thickness : Thickness of the four lines used to display the
  rectangle.

  \warning The thickness can not be set if the display uses the d3d library.
*/
void vpDisplayWin32::displayRectangle( const vpImagePoint &topLeft,
                                       const vpImagePoint &bottomRight,
                                       const vpColor &color, bool fill,
			                                 unsigned int thickness )
{
  //wait if the window is not initialized
  waitForInit();
  unsigned int width = static_cast<unsigned int>( bottomRight.get_j() - topLeft.get_j() );
  unsigned int height = static_cast<unsigned int>(bottomRight.get_i() - topLeft.get_i() );
  window.renderer->drawRect(topLeft,width,height,color, fill, thickness);
}
Example #12
0
/*!
	
  Initialization of the tracking. The line is defined thanks to the
  coordinates of two points.

  \param I : Image in which the line appears.
  \param ip1 : Coordinates of the first point.
  \param ip2 : Coordinates of the second point.
*/
void
vpMeLine::initTracking(const vpImage<unsigned char> &I,
                       const vpImagePoint &ip1,
                       const vpImagePoint &ip2)
{
  vpCDEBUG(1) <<" begin vpMeLine::initTracking()"<<std::endl ;

  int i1s, j1s, i2s, j2s;

  i1s = vpMath::round( ip1.get_i() );
  i2s = vpMath::round( ip2.get_i() );
  j1s = vpMath::round( ip1.get_j() );
  j2s = vpMath::round( ip2.get_j() );

  try{

    //  1. On fait ce qui concerne les droites (peut etre vide)
    {
      // Points extremites
      PExt[0].ifloat = (float)ip1.get_i() ;
      PExt[0].jfloat = (float)ip1.get_j() ;
      PExt[1].ifloat = (float)ip2.get_i() ;
      PExt[1].jfloat = (float)ip2.get_j() ;

      double angle_ = atan2((double)(i1s-i2s),(double)(j1s-j2s)) ;
      a = cos(angle_) ;
      b = sin(angle_) ;

      // Real values of a, b can have an other sign. So to get the good values
      // of a and b in order to initialise then c, we call track(I) just below

      computeDelta(delta,i1s,j1s,i2s,j2s) ;
      delta_1 = delta;

      //      vpTRACE("a: %f b: %f c: %f -b/a: %f delta: %f", a, b, c, -(b/a), delta);

      sample(I) ;

    }
    //  2. On appelle ce qui n'est pas specifique
    {
      vpMeTracker::initTracking(I) ;
    }
    // Call track(I) to give the good sign to a and b and to initialise c which can be used for the display
    track(I);
  }
  catch(...)
  {
    vpERROR_TRACE("Error caught") ;
    throw ;
  }
  vpCDEBUG(1) <<" end vpMeLine::initTracking()"<<std::endl ;
}
Example #13
0
/*!

  \relates vpImagePoint

  Returns true if ip1 and ip2 are different; otherwire returns true.

*/
VISP_EXPORT bool operator!=( const vpImagePoint &ip1, const vpImagePoint &ip2 ) {
  //return ( ( ip1.get_i() != ip2.get_i() ) || ( ip1.get_j() != ip2.get_j() ) );
  double i1 = ip1.get_i();
  double j1 = ip1.get_j();
  double i2 = ip2.get_i();
  double j2 = ip2.get_j();

  return (
    ( std::fabs(i1-i2) > std::fabs(vpMath::maximum(i1, i2))*std::numeric_limits<double>::epsilon() )
    ||
    ( std::fabs(j1-j2) > std::fabs(vpMath::maximum(j1, j2))*std::numeric_limits<double>::epsilon() )
    );
}
Example #14
0
/*!
  Test if two segments are intersecting.
  
  \throw vpException::divideByZeroError if the two lines are aligned (
  denominator equal to zero).
  
  \param ip1 : The first image point of the first segment.
  \param ip2 : The second image point of the first segment.
  \param ip3 : The first image point of the second segment.
  \param ip4 : The second image point of the second segment.
*/
bool 
vpPolygon::testIntersectionSegments(const vpImagePoint& ip1, const vpImagePoint& ip2, const vpImagePoint& ip3, const vpImagePoint& ip4)
{
  double di1 = ip2.get_i() - ip1.get_i();
  double dj1 = ip2.get_j() - ip1.get_j();
  
  double di2 = ip4.get_i() - ip3.get_i();
  double dj2 = ip4.get_j() - ip3.get_j();
  
  double denominator = di1 * dj2 - dj1 * di2;
  
  if(fabs(denominator) < std::numeric_limits<double>::epsilon()){
    throw vpException(vpException::divideByZeroError, "Denominator is null, lines are parallels");
  }
  
  double alpha = - ( ( ip1.get_i() - ip3.get_i() ) * dj2 + di2 * ( ip3.get_j() - ip1.get_j())) / denominator;  
  if(alpha < 0  || alpha >= 1){
    return false;
  }
  
  double beta = - (di1 * (ip3.get_j() - ip1.get_j() ) + dj1 * (ip1.get_i() - ip3.get_i()) ) / denominator;
  if(beta < 0  || beta >= 1){
    return false;
  }
  
  return true;
}
Example #15
0
/*!
  Display a selection of the color image \e I in RGBa format (32bits).

  \warning Display has to be initialized.

  \warning Suppress the overlay drawing in the region of interest.

  \param I : Image to display.
  
  \param iP : Top left corner of the region of interest
  
  \param w : Width of the region of interest
  
  \param h : Height of the region of interest

  \sa init(), closeDisplay()
*/
void vpDisplayGTK::displayImageROI ( const vpImage<vpRGBa> &I,const vpImagePoint &iP, const unsigned int w, const unsigned int h )
{
  if (displayHasBeenInitialized)
  {
    vpImage<vpRGBa> Itemp;
    vpImageTools::crop(I,(unsigned int)iP.get_i(), (unsigned int)iP.get_j(), h, w, Itemp);
    /* Copie de l'image dans le pixmap fond */
    gdk_draw_rgb_32_image(background,
                          gc, (gint)iP.get_u(), (gint)iP.get_v(), (gint)w, (gint)h,
                          GDK_RGB_DITHER_NONE,
                          (unsigned char *)Itemp.bitmap,
                          (gint)(4*w));

    /* Permet de fermer la fenetre si besoin (cas des sequences d'images) */
    //while (g_main_iteration(FALSE));

    /* Le pixmap background devient le fond de la zone de dessin */
    gdk_window_set_back_pixmap(widget->window, background, FALSE);

    /* Affichage */
    //gdk_window_clear(GTK_WINDOW(widget));
    //flushDisplay() ;
  }
  else
  {
    vpERROR_TRACE("GTK not initialized " ) ;
    throw(vpDisplayException(vpDisplayException::notInitializedError,
                             "GTK not initialized")) ;
  }
}
Example #16
0
/*!
  Display a selection of the gray level image \e I (8bits).

  \warning Display has to be initialized.

  \warning Suppress the overlay drawing in the region of interest.

  \param I : Image to display.
  
  \param iP : Top left corner of the region of interest
  
  \param w : Width of the region of interest
  
  \param h : Height of the region of interest

  \sa init(), closeDisplay()
*/
void vpDisplayGTK::displayImageROI ( const vpImage<unsigned char> &I,const vpImagePoint &iP, const unsigned int w, const unsigned int h )
{
  if (displayHasBeenInitialized)
  {
    vpImage<unsigned char> Itemp;
    vpImageTools::crop(I,(unsigned int)iP.get_i(),(unsigned int)iP.get_j(), h, w,Itemp);
    /* Copie de l'image dans le pixmap fond */
    gdk_draw_gray_image(background,
                        gc, (gint)iP.get_u(), (gint)iP.get_v(), (gint)w, (gint)h,
                        GDK_RGB_DITHER_NONE,
                        I.bitmap,
                        (gint)w);

    /* Le pixmap background devient le fond de la zone de dessin */
    gdk_window_set_back_pixmap(widget->window, background, FALSE);

    /* Affichage */
    //gdk_window_clear(GTK_WINDOW(widget));
    //gdk_flush();
  }
  else
  {
    vpERROR_TRACE("GTK not initialized " ) ;
    throw(vpDisplayException(vpDisplayException::notInitializedError,
                             "GTK not initialized")) ;
  }
}
Example #17
0
bool crossesEastBorder(const vpImage<int> &I, bool checked[8], const vpImagePoint &point) {
  vpDirection direction;
  if ( !fromTo(point, vpImagePoint(point.get_i(), point.get_j() + 1), direction) ) {
    return false;
  }

  bool b = checked[(int) direction.m_direction];

  if (point.get_i() < 0 || point.get_j() < 0) {
    return false;
  }

  unsigned int i = (unsigned int) point.get_i();
  unsigned int j = (unsigned int) point.get_j();

  return I[i][j] != 0 && ( (unsigned int) point.get_j() == I.getWidth()-1 || b);
}
Example #18
0
bool vpMbtKltPolygon::intersect(const vpImagePoint& p1, const vpImagePoint& p2, const double i_test, const double j_test, const double i, const double j)
{
  double dx = p2.get_j() - p1.get_j();
  double dy = p2.get_i() - p1.get_i();
  double ex = j - j_test;
  double ey = i - i_test;

  double den = dx * ey - dy * ex;
  double t = 0, u = 0;
  if(den != 0){
    t = -( ey * ( p1.get_j() - j_test ) + ex * ( -p1.get_i() + i_test ) ) / den;
    u = -( dx * ( -p1.get_i() + i_test ) + dy * ( p1.get_j() - j_test ) ) / den;
  }
  else{
    throw vpException(vpException::divideByZeroError, "denominator null");
  }
  return ( t >= std::numeric_limits<double>::epsilon() && t < 1.0 && u >= std::numeric_limits<double>::epsilon() && u < 1.0);
}
/*!
  Compute the points of interest in the specified region of the current image 
  and try to recognise them using the trained classifier. The matched pairs can 
  be found with the getMatchedPointByRef function. The homography between the 
  two planar surfaces is also computed.
  
  \param I : The gray scaled image where the points are computed.
  \param iP : the top left corner of the rectangle defining the ROI
  \param height : the height of the ROI
  \param width : the width of the ROI
  
  \return true if the surface has been found.
*/
bool 
vpPlanarObjectDetector::matchPoint(const vpImage<unsigned char> &I,
           const vpImagePoint &iP, const unsigned int height, const unsigned int width)
{
  if((iP.get_i()+height) >= I.getHeight()
     || (iP.get_j()+width) >= I.getWidth()) {
    vpTRACE("Bad size for the subimage");
    throw(vpException(vpImageException::notInTheImage ,
		      "Bad size for the subimage"));
  }

  vpImage<unsigned char> subImage;

  vpImageTools::createSubImage(I,
			       (unsigned int)iP.get_i(),
			       (unsigned int)iP.get_j(),
			       height, width, subImage);

  return this->matchPoint(subImage);
}
Example #20
0
int
vpMeTracker::outOfImage(vpImagePoint iP, int half, int rows, int cols)
{
  int i = vpMath::round(iP.get_i());
  int j = vpMath::round(iP.get_j());
  return (! ((i> half+2) &&
    (i< rows -(half+2)) &&
    (j>half+2) &&
    (j<cols-(half+2)))
    ) ;
}
Example #21
0
void addContourPoint(vpImage<int> &I, vp::vpContour *border, const vpImagePoint &point, bool checked[8], const int nbd) {
  border->m_points.push_back(point);

  unsigned int i = (unsigned int) point.get_i();
  unsigned int j = (unsigned int) point.get_j();

  if (crossesEastBorder(I, checked, point)) {
    I[i][j] = -nbd;
  } else if (I[i][j] == 1) {
    //Only set if the pixel has not been visited before (3.4) (b)
    I[i][j] = nbd;
  } //Otherwise leave it alone
}
/*!
  Display a cross at the image point \e ip location.
  \param ip : Cross location.
  \param size : Size (width and height) of the cross.
  \param color : Cross color.
  \param thickness : Thickness of the lines used to display the cross.
*/
void
vpDisplayOpenCV::displayCross(const vpImagePoint &ip,
                              unsigned int size,
                              const vpColor &color,
			      unsigned int thickness)
{
  if (displayHasBeenInitialized)
  {
    vpImagePoint top,bottom,left,right;
    top.set_i(ip.get_i()-size/2);
    top.set_j(ip.get_j());
    bottom.set_i(ip.get_i()+size/2);
    bottom.set_j(ip.get_j());
    left.set_i(ip.get_i());
    left.set_j(ip.get_j()-size/2);
    right.set_i(ip.get_i());
    right.set_j(ip.get_j()+size/2);
    try{
      displayLine(top, bottom, color, thickness) ;
      displayLine(left, right, color, thickness) ;
    }
    catch (...)
    {
      vpERROR_TRACE("Error caught") ;
      throw ;
    }
  }

  else
  {
    vpERROR_TRACE("OpenCV not initialized " ) ;
    throw(vpDisplayException(vpDisplayException::notInitializedError,
                             "OpenCV not initialized")) ;
  }

}
Example #23
0
/*!
  Computes the \f$ \theta \f$ angle which represents the angle between the tangente to the curve and the i axis.

  \param theta : The computed value.
  \param K : The parameters of the ellipse.
  \param iP : the point belonging th the ellipse where the angle is computed.
*/
void
computeTheta(double &theta, vpColVector &K, vpImagePoint iP)
{

  double i = iP.get_i();
  double j = iP.get_j();

  double A = 2*i+2*K[1]*j + 2*K[2] ;
  double B = 2*K[0]*j + 2*K[1]*i + 2*K[3];

  theta = atan2(A,B) ; //Angle between the tangente and the i axis.

  while (theta > M_PI) { theta -= M_PI ; }
  while (theta < 0) { theta += M_PI ; }
}
Example #24
0
/*!
  Check if the 2D point \f$ iP \f$ is inside the triangle.
  
  \param iP : The point which coulb be inside the triangle.
  \param threshold : A threshold used to define the accuracy of the computation when the point is very near from the edges of the triangle. 0 is the smallest value.
  
  \return Returns true if the point is inside the triangle. Returns false otherwise.
*/
bool
vpTriangle::inTriangle(const vpImagePoint &iP, double threshold)
{
  if(!goodTriange)
    return false;
  
  if(threshold < 0)
    threshold = 0;
  
  ptempo0 = iP.get_i() - S1.get_i();
  ptempo1 = iP.get_j() - S1.get_j();
  
  double p_ds_uv0=ptempo0*uvinv00+ptempo1*uvinv10;
  double p_ds_uv1=ptempo0*uvinv01+ptempo1*uvinv11;
  
  return (p_ds_uv0+p_ds_uv1<1.+threshold && p_ds_uv0>-threshold && p_ds_uv1>-threshold);
}
Example #25
0
/*!
  Display a cross at the image point \e ip location.
  \param ip : Cross location.
  \param size : Size (width and height) of the cross.
  \param color : Cross color.
  \param thickness : Thickness of the lines used to display the cross.
*/
void vpDisplayGTK::displayCross ( const vpImagePoint &ip, 
				  unsigned int size, 
				  const vpColor &color,
				  unsigned int thickness)
{
  if (displayHasBeenInitialized)
  {
    try{
      double i = ip.get_i();
      double j = ip.get_j();
      vpImagePoint ip1, ip2;

      ip1.set_i( i-size/2 ); 
      ip1.set_j( j );
      ip2.set_i( i+size/2 ); 
      ip2.set_j( j );
      displayLine ( ip1, ip2, color, thickness ) ;

      ip1.set_i( i ); 
      ip1.set_j( j-size/2 );
      ip2.set_i( i ); 
      ip2.set_j( j+size/2 );

      displayLine ( ip1, ip2, color, thickness ) ;
    }
    catch (...)
    {
      vpERROR_TRACE("Error caught") ;
      throw ;
    }
  }

  else
  {
    vpERROR_TRACE("GTK not initialized " ) ;
    throw(vpDisplayException(vpDisplayException::notInitializedError,
                             "GTK not initialized")) ;
  }
}
Example #26
0
/*!

  \relates vpImagePoint

  Returns a vpImagePoint with an offset added to the two coordinates.

  \code
#include <iostream>
#include <visp3/core/vpImagePoint.h>

int main()
{
  vpImagePoint ip(100, 200); // Create an image point with coordinates i=100, j=200
  std::cout << "ip: " << ip << std::endl; // coordinates (100, 200)
  std::cout << "ip+10: " << ip+10 << std::endl; // new coordinates (110, 210)

  return 0;
}
  \endcode
*/
VISP_EXPORT vpImagePoint operator+( const vpImagePoint &ip1, const int offset ) {
  return ( vpImagePoint(ip1.get_i()+offset, ip1.get_j()+offset));
}
Example #27
0
/*!

  \relates vpImagePoint

  Returns a vpImagePoint wich is the difference between \f$ ip1 \f$ and \f$ ip2 \f$.

*/
VISP_EXPORT vpImagePoint operator-( const vpImagePoint &ip1, const vpImagePoint &ip2 ) {
  return ( vpImagePoint(ip1.get_i()-ip2.get_i(), ip1.get_j()-ip2.get_j()));
}
Example #28
0
/*!

  \relates vpImagePoint

  Returns a vpImagePoint with coordinates divided by a scale factor.

  \code
#include <iostream>
#include <visp3/core/vpImagePoint.h>

int main()
{
  vpImagePoint ip(100, 200); // Create an image point with coordinates i=100, j=200
  std::cout << "ip: " << ip << std::endl; // coordinates (100, 200)
  std::cout << "ip/2: " << ip/2 << std::endl; // new coordinates (50, 100)

  return 0;
}
  \endcode
*/
VISP_EXPORT vpImagePoint operator/( const vpImagePoint &ip1, const double scale ) {
  return ( vpImagePoint(ip1.get_i()/scale, ip1.get_j()/scale));
}
Example #29
0
/*!

  \relates vpImagePoint

  Returns a vpImagePoint with an offset substracted to the two coordinates.

  \code
#include <iostream>
#include <visp3/core/vpImagePoint.h>

int main()
{
  vpImagePoint ip(100, 200); // Create an image point with coordinates i=100, j=200
  std::cout << "ip: " << ip << std::endl; // coordinates (100, 200)
  std::cout << "ip-12.34: " << ip-12.34 << std::endl; // new coordinates (87.66, 187.66)

  return 0;
}
  \endcode
*/
VISP_EXPORT vpImagePoint operator-( const vpImagePoint &ip1, const double offset ) {
  return ( vpImagePoint(ip1.get_i()-offset, ip1.get_j()-offset));
}