Example #1
0
void BaseRenderOSystem::fadeToColor(byte r, byte g, byte b, byte a, Common::Rect *rect) {
	Common::Rect fillRect;

	if (rect) {
		fillRect.left = rect->left;
		fillRect.top = rect->top;
		fillRect.setWidth(rect->width());
		fillRect.setHeight(rect->height());
	} else {
		Rect32 rc;
		_gameRef->getCurrentViewportRect(&rc);
		fillRect.left = (int16)rc.left;
		fillRect.top = (int16)rc.top;
		fillRect.setWidth((int16)(rc.right - rc.left));
		fillRect.setHeight((int16)(rc.bottom - rc.top));
	}
	modTargetRect(&fillRect);

	//TODO: This is only here until I'm sure about the final pixelformat
	uint32 col = _renderSurface->format.ARGBToColor(a, r, g, b);

	Graphics::Surface surf;
	surf.create((uint16)fillRect.width(), (uint16)fillRect.height(), _renderSurface->format);
	Common::Rect sizeRect(fillRect);
	sizeRect.translate(-fillRect.top, -fillRect.left);
	surf.fillRect(fillRect, col);
	TransformStruct temp = TransformStruct();
	temp._alphaDisable = false;
	drawSurface(nullptr, &surf, &sizeRect, &fillRect, temp);
	surf.free();

	//SDL_SetRenderDrawColor(_renderer, r, g, b, a);
	//SDL_SetRenderDrawBlendMode(_renderer, SDL_BLENDMODE_BLEND);
	//SDL_RenderFillRect(_renderer, &fillRect);
}
bool BaseSurfaceOSystem::drawSprite(int x, int y, Rect32 *rect, Rect32 *newRect, TransformStruct transform) {
	BaseRenderOSystem *renderer = static_cast<BaseRenderOSystem *>(_gameRef->_renderer);

	if (!_loaded) {
		finishLoad();
	}

	if (renderer->_forceAlphaColor != 0) {
		transform._rgbaMod = renderer->_forceAlphaColor;
	}

	// TODO: This _might_ miss the intended behaviour by 1 in each direction
	// But I think it fits the model used in Wintermute.
	Common::Rect srcRect;
	srcRect.left = rect->left;
	srcRect.top = rect->top;
	srcRect.setWidth(rect->right - rect->left);
	srcRect.setHeight(rect->bottom - rect->top);

	Common::Rect position;

	if (newRect) {
		position.top = y;
		position.left = x;
		position.setWidth(newRect->width());
		position.setHeight(newRect->height());
	} else {

		Rect32 r;
		r.top = 0;
		r.left = 0;
		r.setWidth(rect->width());
		r.setHeight(rect->height());

		r = TransformTools::newRect(r, transform, 0);

		position.top = r.top + y + transform._offset.y;
		position.left = r.left + x + transform._offset.x;
		position.setWidth(r.width() * transform._numTimesX);
		position.setHeight(r.height() * transform._numTimesY);
	}
	renderer->modTargetRect(&position);

	// TODO: This actually requires us to have the SAME source-offsets every time,
	// But no checking is in place for that yet.

	// Optimize by not doing alpha-blits if we lack alpha
	if (_alphaType == TransparentSurface::ALPHA_OPAQUE && !transform._alphaDisable) {
		transform._alphaDisable = true;
	}

	renderer->drawSurface(this, _surface, &srcRect, &position, transform); 
	return STATUS_OK;
}
Example #3
0
// Replacement for SDL2's SDL_RenderCopy
void RenderTicket::drawToSurface(Graphics::Surface *_targetSurface) const {
	TransparentSurface src(*getSurface(), false);

	Common::Rect clipRect;
	clipRect.setWidth(getSurface()->w);
	clipRect.setHeight(getSurface()->h);

	if (_owner) {
		if (_transform._alphaDisable) {
			src.setAlphaMode(TransparentSurface::ALPHA_OPAQUE);
		} else {
			src.setAlphaMode(_owner->getAlphaType());
		}
	}

	int y = _dstRect.top;
	int w = _dstRect.width() / _transform._numTimesX;
	int h = _dstRect.height() / _transform._numTimesY;

	for (int ry = 0; ry < _transform._numTimesY; ++ry) {
		int x = _dstRect.left;
		for (int rx = 0; rx < _transform._numTimesX; ++rx) {
			src.blit(*_targetSurface, x, y, _transform._flip, &clipRect, _transform._rgbaMod, clipRect.width(), clipRect.height());
			x += w;
		}
		y += h;
	}
}
Example #4
0
Common::Rect GameModule::readRect(Common::SeekableReadStream &s) {
	Common::Rect r;
	r.left = s.readUint16LE();
	r.top = s.readUint16LE();
	r.setWidth(s.readUint16LE());
	r.setHeight(s.readUint16LE());
	return r;
}
Example #5
0
Common::Rect makeRect(int16 x, int16 y, int16 width, int16 height) {
	Common::Rect rect;
	rect.left = x;
	rect.top = y;
	rect.setWidth(width);
	rect.setHeight(height);
	return rect;
}
Example #6
0
void Animation::getFrameRect(Common::Rect &r) const {
	r.setWidth(0); r.setHeight(0);
	if (!gfxobj) {
		return;
	}
	gfxobj->getRect(_frame, r);
	r.translate(_left, _top);
}
Example #7
0
bool ASurface::clip(Common::Rect &r) {
	int skip;
	_leftSkip = _rightSkip = 0;
	_topSkip = _bottomSkip = 0;

	if (r.left > _clipWidth || r.left < 0) {
		if (r.left >= 0)
			return true;

		skip = -r.left;
		r.setWidth(r.width() - skip);
		_leftSkip = skip;
		r.moveTo(0, r.top);
	}

	int right = r.right - 1;
	if (right < 0)
		return true;
	else if (right > _clipWidth) {
		skip = right - _clipWidth;
		r.setWidth(r.width() - skip);
		_rightSkip = skip;
	}

	if (r.top > _clipHeight || r.top < 0) {
		if (r.top >= 0)
			return true;

		skip = -r.top;
		r.setHeight(r.height() - skip);
		_topSkip = skip;
		r.moveTo(r.left, 0);
	}

	int bottom = r.bottom - 1;
	if (bottom < 0)
		return true;
	else if (bottom > _clipHeight) {
		skip = bottom - _clipHeight;
		_bottomSkip = skip;
		r.setHeight(r.height() - skip);
	}

	return false;
}
Example #8
0
// Replacement for SDL2's SDL_RenderCopy
void RenderTicket::drawToSurface(Graphics::Surface *_targetSurface) const {
	TransparentSurface src(*getSurface(), false);

	Common::Rect clipRect;
	clipRect.setWidth(getSurface()->w);
	clipRect.setHeight(getSurface()->h);

	src._enableAlphaBlit = !_transform._alphaDisable;
	src.blit(*_targetSurface, _dstRect.left, _dstRect.top, _transform._flip, &clipRect, _transform._rgbaMod, clipRect.width(), clipRect.height());
}
bool BaseRenderOSystem::setViewport(int left, int top, int right, int bottom) {
	Common::Rect rect;
	// TODO: Hopefully this is the same logic that ScummVM uses.
	rect.left = (int16)(left + _borderLeft);
	rect.top = (int16)(top + _borderTop);
	rect.setWidth((int16)((right - left) * _ratioX));
	rect.setHeight((int16)((bottom - top) * _ratioY));

	_renderRect = rect;
	return STATUS_OK;
}
Example #10
0
void InventoryRenderer::getItemRect(ItemPosition pos, Common::Rect &r) {

    r.setHeight(_props->_itemHeight);
    r.setWidth(_props->_itemWidth);

    uint16 line = pos / _props->_itemsPerLine;
    uint16 col = pos % _props->_itemsPerLine;

    r.moveTo(col * _props->_itemWidth, line * _props->_itemHeight);

}
Example #11
0
Common::Rect Cursor::getHotRectangle() const {
	if (!_cursorImage) {
		return Common::Rect();
	} else {
		Common::Point hotSpot = _cursorImage->getHotspot();

		Common::Rect hotRectangle;
		hotRectangle.setWidth(_cursorImage->getWidth());
		hotRectangle.setHeight(_cursorImage->getHeight());
		hotRectangle.translate(-hotSpot.x, -hotSpot.y);

		return hotRectangle;
	}
}
Example #12
0
// Replacement for SDL2's SDL_RenderCopy
void RenderTicket::drawToSurface(Graphics::Surface *_targetSurface) const {
    TransparentSurface src(*getSurface(), false);

    Common::Rect clipRect;
    clipRect.setWidth(getSurface()->w);
    clipRect.setHeight(getSurface()->h);

    if (_owner) {
        if (_transform._alphaDisable) {
            src._alphaMode = TransparentSurface::ALPHA_OPAQUE;
        } else {
            src._alphaMode = _owner->getAlphaType();
        }
    }
    src.blit(*_targetSurface, _dstRect.left, _dstRect.top, _transform._flip, &clipRect, _transform._rgbaMod, clipRect.width(), clipRect.height());
}
Example #13
0
void Frame::playTransition(Score *score) {
	uint16 duration = _transDuration * 250; // _transDuration in 1/4 of sec
	duration = (duration == 0 ? 250 : duration); // director support transition duration = 0, but animation play like value = 1, idk.

	if (_transChunkSize == 0)
		_transChunkSize = 1; //equal 1 step

	uint16 stepDuration = duration / _transChunkSize;
	uint16 steps = duration / stepDuration;

	switch (_transType) {
	case kTransCoverDown:
		{
			uint16 stepSize = score->_movieRect.height() / steps;
			Common::Rect r = score->_movieRect;

			for (uint16 i = 1; i < steps; i++) {
				r.setHeight(stepSize * i);

				g_system->delayMillis(stepDuration);
				score->processEvents();

				g_system->copyRectToScreen(score->_surface->getPixels(), score->_surface->pitch, 0, 0, r.width(), r.height());
				g_system->updateScreen();
			}
		}
		break;
	case kTransCoverUp:
		{
			uint16 stepSize = score->_movieRect.height() / steps;
			Common::Rect r = score->_movieRect;

			for (uint16 i = 1; i < steps; i++) {
				r.setHeight(stepSize * i);

				g_system->delayMillis(stepDuration);
				score->processEvents();

				g_system->copyRectToScreen(score->_surface->getPixels(), score->_surface->pitch, 0, score->_movieRect.height() - stepSize * i, r.width(), r.height());
				g_system->updateScreen();
			}
		}
		break;
	case kTransCoverRight: {
			uint16 stepSize = score->_movieRect.width() / steps;
			Common::Rect r = score->_movieRect;

			for (uint16 i = 1; i < steps; i++) {
				r.setWidth(stepSize * i);

				g_system->delayMillis(stepDuration);
				score->processEvents();

				g_system->copyRectToScreen(score->_surface->getPixels(), score->_surface->pitch, 0, 0, r.width(), r.height());
				g_system->updateScreen();
			}
		}
		break;
	case kTransCoverLeft: {
			uint16 stepSize = score->_movieRect.width() / steps;
			Common::Rect r = score->_movieRect;

			for (uint16 i = 1; i < steps; i++) {
				r.setWidth(stepSize * i);

				g_system->delayMillis(stepDuration);
				score->processEvents();

				g_system->copyRectToScreen(score->_surface->getPixels(), score->_surface->pitch, score->_movieRect.width() - stepSize * i, 0, r.width(), r.height());
				g_system->updateScreen();
			}
		}
		break;
	case kTransCoverUpLeft: {
			uint16 stepSize = score->_movieRect.width() / steps;
			Common::Rect r = score->_movieRect;

			for (uint16 i = 1; i < steps; i++) {
				r.setWidth(stepSize * i);
				r.setHeight(stepSize * i);

				g_system->delayMillis(stepDuration);
				score->processEvents();

				g_system->copyRectToScreen(score->_surface->getPixels(), score->_surface->pitch, score->_movieRect.width() - stepSize * i, score->_movieRect.height() - stepSize * i, r.width(), r.height());
				g_system->updateScreen();
			}
		}
		break;
	case kTransCoverUpRight: {
			uint16 stepSize = score->_movieRect.width() / steps;
			Common::Rect r = score->_movieRect;

			for (uint16 i = 1; i < steps; i++) {
				r.setWidth(stepSize * i);
				r.setHeight(stepSize * i);

				g_system->delayMillis(stepDuration);
				score->processEvents();

				g_system->copyRectToScreen(score->_surface->getPixels(), score->_surface->pitch, 0, score->_movieRect.height() - stepSize * i, r.width(), r.height());
				g_system->updateScreen();
			}
		}
		break;
	case kTransCoverDownLeft: {
			uint16 stepSize = score->_movieRect.width() / steps;
			Common::Rect r = score->_movieRect;

			for (uint16 i = 1; i < steps; i++) {
				r.setWidth(stepSize * i);
				r.setHeight(stepSize * i);

				g_system->delayMillis(stepDuration);
				score->processEvents();

				g_system->copyRectToScreen(score->_surface->getPixels(), score->_surface->pitch, score->_movieRect.width() - stepSize * i, 0, r.width(), r.height());
				g_system->updateScreen();
			}
		}
		break;
	case kTransCoverDownRight: {
			uint16 stepSize = score->_movieRect.width() / steps;
			Common::Rect r = score->_movieRect;

			for (uint16 i = 1; i < steps; i++) {
				r.setWidth(stepSize * i);
				r.setHeight(stepSize * i);

				g_system->delayMillis(stepDuration);
				score->processEvents();

				g_system->copyRectToScreen(score->_surface->getPixels(), score->_surface->pitch, 0, 0, r.width(), r.height());
				g_system->updateScreen();
			}
		}
		break;
	default:
		warning("Unhandled transition type %d %d %d", _transType, duration, _transChunkSize);
		break;

	}
}
Example #14
0
bool UserInterface::getBounds(ScrCategory category, int v, Common::Rect &bounds) {
	int heightMultiplier, widthMultiplier;
	int leftStart, yOffset, widthAmt;

	switch (category) {
	case CAT_COMMAND:
		heightMultiplier = v % 5;
		widthMultiplier = v / 5;
		leftStart = 2;
		yOffset = 3;
		widthAmt = 32;
		break;

	case CAT_INV_LIST:
		if (v < _inventoryTopIndex || v >= (_inventoryTopIndex + 5))
			return false;

		heightMultiplier = v - _inventoryTopIndex;
		widthMultiplier = 0;
		leftStart = 90;
		yOffset = 3;
		widthAmt = 69;
		break;

	case CAT_TALK_ENTRY:
		heightMultiplier = v;
		widthMultiplier = 0;
		leftStart = 2;
		yOffset = 3;
		widthAmt = 310;
		break;

	case CAT_INV_SCROLLER:
		heightMultiplier = 0;
		widthMultiplier = 0;
		yOffset = 0;
		widthAmt = 9;
		leftStart = (v != 73) ? 73 : 75;
		break;

	default:
		heightMultiplier = v;
		widthMultiplier = 0;
		leftStart = 240;
		yOffset = 3;
		widthAmt = 80;
		break;
	}

	bounds.left = (widthMultiplier > 0) ? widthMultiplier * widthAmt + leftStart : leftStart;
	bounds.setWidth(widthAmt);
	bounds.top = heightMultiplier * 8 + yOffset;
	bounds.setHeight(8);

	if (category == CAT_INV_SCROLLER) {
		switch (v) {
		case SCROLLBAR_UP:
			// Arrow up
			bounds.top = 4;
			bounds.setHeight(7);
			break;
		case SCROLLBAR_DOWN:
			// Arrow down
			bounds.top = 35;
			bounds.setHeight(7);
			break;
		case SCROLLBAR_ELEVATOR:
			// Scroller
			bounds.top = 12;
			bounds.setHeight(22);
			break;
		case SCROLLBAR_THUMB:
			// Thumb
			bounds.top = _scrollbarElevator + 14;
			bounds.setHeight(1);
			break;
		default:
			break;
		}
	}

	return true;
}
Example #15
0
bool BaseSurfaceOSystem::drawSprite(int x, int y, Rect32 *rect, float zoomX, float zoomY, uint32 alpha, bool alphaDisable, TSpriteBlendMode blendMode, bool mirrorX, bool mirrorY, int offsetX, int offsetY) {
	BaseRenderOSystem *renderer = static_cast<BaseRenderOSystem *>(_gameRef->_renderer);

	if (!_loaded) {
		finishLoad();
	}

	if (renderer->_forceAlphaColor != 0) {
		alpha = renderer->_forceAlphaColor;
	}

	byte r = RGBCOLGetR(alpha);
	byte g = RGBCOLGetG(alpha);
	byte b = RGBCOLGetB(alpha);
	byte a = RGBCOLGetA(alpha);

	renderer->setAlphaMod(a);
	renderer->setColorMod(r, g, b);

#if 0 // These are kept for reference if BlendMode is reimplemented at some point.
	if (alphaDisable) {
		SDL_SetTextureBlendMode(_texture, SDL_BLENDMODE_NONE);
	} else {
		SDL_SetTextureBlendMode(_texture, SDL_BLENDMODE_BLEND);
	}
#endif
	// TODO: This _might_ miss the intended behaviour by 1 in each direction
	// But I think it fits the model used in Wintermute.
	Common::Rect srcRect;
	srcRect.left = rect->left;
	srcRect.top = rect->top;
	srcRect.setWidth(rect->right - rect->left);
	srcRect.setHeight(rect->bottom - rect->top);

	Common::Rect position;
	position.left = x + offsetX;
	position.top = y + offsetY;

	// Crop off-by-ones:
	if (position.left == -1) {
		position.left = 0; // TODO: Something is wrong
	}
	if (position.top == -1) {
		position.top = 0; // TODO: Something is wrong
	}

	position.setWidth((int16)((float)srcRect.width() * zoomX / 100.f));
	position.setHeight((int16)((float)srcRect.height() * zoomX / 100.f));

	renderer->modTargetRect(&position);

	/*  position.left += offsetX;
	    position.top += offsetY;*/

	// TODO: This actually requires us to have the SAME source-offsets every time,
	// But no checking is in place for that yet.

	// TODO: Optimize by not doing alpha-blits if we lack or disable alpha
	bool hasAlpha;
	if (_hasAlpha && !alphaDisable) {
		hasAlpha = true;
	} else {
		hasAlpha = false;
	}
	if (alphaDisable) {
		warning("BaseSurfaceOSystem::drawSprite - AlphaDisable ignored");
	}

	renderer->drawSurface(this, _surface, &srcRect, &position, mirrorX, mirrorY, !hasAlpha);

	return STATUS_OK;
}
Example #16
0
void RenderTicket::drawToSurface(Graphics::Surface *_targetSurface, Common::Rect *dstRect, Common::Rect *clipRect) const {
	TransparentSurface src(*getSurface(), false);
	bool doDelete = false;
	if (!clipRect) {
		doDelete = true;
		clipRect = new Common::Rect();
		clipRect->setWidth(getSurface()->w * _transform._numTimesX);
		clipRect->setHeight(getSurface()->h * _transform._numTimesY);
	}

	if (_owner) {
		if (_transform._alphaDisable) {
			src.setAlphaMode(TransparentSurface::ALPHA_OPAQUE);
		} else {
			src.setAlphaMode(_owner->getAlphaType());
		}
	}

	if (_transform._numTimesX * _transform._numTimesY == 1) {

		src.blit(*_targetSurface, dstRect->left, dstRect->top, _transform._flip, clipRect, _transform._rgbaMod, clipRect->width(), clipRect->height(), _transform._blendMode);

	} else {

		// clipRect is a subrect of the full numTimesX*numTimesY rect
		Common::Rect subRect;

		int y = 0;
		int w = getSurface()->w;
		int h = getSurface()->h;
		assert(w == _dstRect.width() / _transform._numTimesX);
		assert(h == _dstRect.height() / _transform._numTimesY);

		int basex = dstRect->left - clipRect->left;
		int basey = dstRect->top - clipRect->top;

		for (int ry = 0; ry < _transform._numTimesY; ++ry) {
			int x = 0;
			for (int rx = 0; rx < _transform._numTimesX; ++rx) {

				subRect.left = x;
				subRect.top = y;
				subRect.setWidth(w);
				subRect.setHeight(h);

				if (subRect.intersects(*clipRect)) {
					subRect.clip(*clipRect);
					subRect.translate(-x, -y);
					src.blit(*_targetSurface, basex + x + subRect.left, basey + y + subRect.top, _transform._flip, &subRect, _transform._rgbaMod, subRect.width(), subRect.height(), _transform._blendMode);

				}

				x += w;
			}
			y += h;
		}
	}

	if (doDelete) {
		delete clipRect;
	}
}
Example #17
0
void Sprite::blit(const Sprite &from, const Common::Rect &area, int32 x, int32 y, bool transp) {
	// Sanity checks
	assert((x >= 0) && (y >= 0) && (x <= 0x7FFF) && (y <= 0x7FFF));

	if (!exists() || !from.exists())
		return;

	Common::Rect toArea = getArea(true);

	toArea.left = x;
	toArea.top  = y;
	if (toArea.isEmpty())
		return;

	Common::Rect fromArea = from.getArea();

	fromArea.clip(area);
	fromArea.setWidth (MIN(fromArea.width() , toArea.width()));
	fromArea.setHeight(MIN(fromArea.height(), toArea.height()));
	if (fromArea.isEmpty() || !fromArea.isValidRect())
		return;

	int32 w = fromArea.width();
	int32 h = fromArea.height();

	const int32 fromTop   = fracToInt(fromArea.top  * from._scaleInverse);
	const int32 fromLeft  = fracToInt(fromArea.left * from._scaleInverse);

	const byte *src = (const byte *) from._surfaceTrueColor.getBasePtr(fromLeft, fromTop);
	      byte *dst = (      byte *)      _surfaceTrueColor.getBasePtr(x, y);

	const uint8 *srcT = from._transparencyMap + fromTop * from._surfaceTrueColor.w + fromLeft;
	      uint8 *dstT =      _transparencyMap +       y *      _surfaceTrueColor.w + x;

	frac_t posW = 0, posH = 0;
	while (h-- > 0) {
		posW = 0;

		const byte *srcRow = src;
		      byte *dstRow = dst;

		const uint8 *srcRowT = srcT;
		      uint8 *dstRowT = dstT;

		for (int32 j = 0; j < w; j++, dstRow += _surfaceTrueColor.bytesPerPixel, dstRowT++) {
			if (!transp || (*srcRowT == 0)) {
				// Ignore transparency or source is solid => copy
				memcpy(dstRow, srcRow, _surfaceTrueColor.bytesPerPixel);
				*dstRowT = *srcRowT;
			} else if (*srcRowT == 2) {
				// Half-transparent
				if (*dstRowT == 1)
					// But destination is transparent => propagate
					memcpy(dstRow, srcRow, _surfaceTrueColor.bytesPerPixel);
				else
					// Destination is solid => mix
					ImgConv.mixTrueColor(dstRow, srcRow);

				*dstRowT = *srcRowT;
			}

			// Advance source data
			posW += from._scaleInverse;
			while (posW >= ((frac_t) FRAC_ONE)) {
				srcRow += from._surfaceTrueColor.bytesPerPixel;
				srcRowT++;
				posW -= FRAC_ONE;
			}

		}

		dst  += _surfaceTrueColor.pitch;
		dstT += _surfaceTrueColor.w;

		// Advance source data
		posH += from._scaleInverse;
		while (posH >= ((frac_t) FRAC_ONE)) {
			src  += from._surfaceTrueColor.pitch;
			srcT += from._surfaceTrueColor.w;
			posH -= FRAC_ONE;
		}

	}
}
Example #18
0
void Gfx::bltMaskScale(const Common::Rect& r, byte *data, Graphics::Surface *surf, uint16 z, uint scale, byte transparentColor) {
	if (scale == 100) {
		// use optimized path
		bltMaskNoScale(r, data, surf, z, transparentColor);
		return;
	}

	// unscaled rectangle size
	uint width = r.width();
	uint height = r.height();

	// scaled rectangle size
	uint scaledWidth = r.width() * scale / 100;
	uint scaledHeight = r.height() * scale / 100;

	// scaled rectangle origin
	uint scaledLeft = r.left + (width - scaledWidth) / 2;
	uint scaledTop = r.top + (height - scaledHeight);

	// clipped scaled destination rectangle
	Common::Rect dstRect(scaledWidth, scaledHeight);
	dstRect.moveTo(scaledLeft, scaledTop);

	Common::Rect clipper(surf->w, surf->h);
	dstRect.clip(clipper);
	if (!dstRect.isValidRect()) return;

	// clipped source rectangle
	Common::Rect srcRect;
	srcRect.left = (dstRect.left - scaledLeft)  * 100 / scale;
	srcRect.top = (dstRect.top - scaledTop) * 100 / scale;
	srcRect.setWidth(dstRect.width() * 100 / scale);
	srcRect.setHeight(dstRect.height() * 100 / scale);
	if (!srcRect.isValidRect()) return;

	Common::Point dp;
	dp.x = dstRect.left;
	dp.y = dstRect.top;

	byte *s = data + srcRect.left + srcRect.top * width;
	byte *d = (byte *)surf->getBasePtr(dp.x, dp.y);

	uint line = 0, col = 0;

	uint xAccum = 0, yAccum = 0;
	uint inc = width * (100 - scale);
	uint thr = width * 100;

	for (uint16 i = 0; i < srcRect.height(); i++) {
		yAccum += inc;

		if (yAccum >= thr) {
			yAccum -= thr;
			s += width;
			continue;
		}

		xAccum = 0;
		byte *d2 = d;
		col = 0;

		for (uint16 j = 0; j < srcRect.width(); j++) {
			xAccum += inc;

			if (xAccum >= thr) {
				xAccum -= thr;
				s++;
				continue;
			}

			if (*s != transparentColor) {
				if (_backgroundInfo->hasMask()) {
					byte v = _backgroundInfo->_mask->getValue(dp.x + col, dp.y + line);
					if (z >= v) *d2 = *s;
				} else {
					*d2 = *s;
				}
			}

			s++;
			d2++;
			col++;
		}

		s += width - srcRect.width();
		d += surf->w;
		line++;
	}

}
Example #19
0
void InventoryRenderer::getRect(Common::Rect& r) const {
    r.setWidth(_props->_width);
    r.setHeight(_props->_itemHeight * getNumLines());
    r.moveTo(_pos);
}