void SkeletonModel::renderBoundingCollisionShapes(gpu::Batch& batch, float alpha) {
const int BALL_SUBDIVISIONS = 10;
auto geometryCache = DependencyManager::get<GeometryCache>();
auto deferredLighting = DependencyManager::get<DeferredLightingEffect>();
Transform transform; // = Transform();
// draw a blue sphere at the capsule top point
glm::vec3 topPoint = _translation + _boundingCapsuleLocalOffset + (0.5f * _boundingCapsuleHeight) * glm::vec3(0.0f, 1.0f, 0.0f);
transform.setTranslation(topPoint);
batch.setModelTransform(transform);
deferredLighting->bindSimpleProgram(batch);
geometryCache->renderSphere(batch, _boundingCapsuleRadius, BALL_SUBDIVISIONS, BALL_SUBDIVISIONS,
glm::vec4(0.6f, 0.6f, 0.8f, alpha));
// draw a yellow sphere at the capsule bottom point
glm::vec3 bottomPoint = topPoint - glm::vec3(0.0f, -_boundingCapsuleHeight, 0.0f);
glm::vec3 axis = topPoint - bottomPoint;
transform.setTranslation(bottomPoint);
batch.setModelTransform(transform);
deferredLighting->bindSimpleProgram(batch);
geometryCache->renderSphere(batch, _boundingCapsuleRadius, BALL_SUBDIVISIONS, BALL_SUBDIVISIONS,
glm::vec4(0.8f, 0.8f, 0.6f, alpha));
// draw a green cylinder between the two points
glm::vec3 origin(0.0f);
Avatar::renderJointConnectingCone(batch, origin, axis, _boundingCapsuleRadius, _boundingCapsuleRadius,
glm::vec4(0.6f, 0.8f, 0.6f, alpha));
}
void CauterizedMeshPartPayload::bindTransform(gpu::Batch& batch, const render::ShapePipeline::LocationsPointer locations, RenderArgs::RenderMode renderMode) const {
// Still relying on the raw data from the model
bool useCauterizedMesh = (renderMode != RenderArgs::RenderMode::SHADOW_RENDER_MODE && renderMode != RenderArgs::RenderMode::SECONDARY_CAMERA_RENDER_MODE);
if (useCauterizedMesh) {
ModelPointer model = _model.lock();
if (model) {
CauterizedModel* skeleton = static_cast<CauterizedModel*>(model.get());
useCauterizedMesh = useCauterizedMesh && skeleton->getEnableCauterization();
} else {
useCauterizedMesh = false;
}
}
if (useCauterizedMesh) {
if (_cauterizedClusterBuffer) {
batch.setUniformBuffer(ShapePipeline::Slot::BUFFER::SKINNING, _cauterizedClusterBuffer);
}
batch.setModelTransform(_cauterizedTransform);
} else {
if (_clusterBuffer) {
batch.setUniformBuffer(ShapePipeline::Slot::BUFFER::SKINNING, _clusterBuffer);
}
batch.setModelTransform(_transform);
}
}
void ModelMeshPartPayload::bindTransform(gpu::Batch& batch, const ShapePipeline::LocationsPointer locations, RenderArgs::RenderMode renderMode) const {
// Still relying on the raw data from the model
if (_clusterBuffer) {
batch.setUniformBuffer(ShapePipeline::Slot::BUFFER::SKINNING, _clusterBuffer);
}
batch.setModelTransform(_transform);
}
void SkeletonModel::renderJointConstraints(gpu::Batch& batch, int jointIndex) {
if (jointIndex == -1 || jointIndex >= _jointStates.size()) {
return;
}
const FBXGeometry& geometry = _geometry->getFBXGeometry();
const float BASE_DIRECTION_SIZE = 0.3f;
float directionSize = BASE_DIRECTION_SIZE * extractUniformScale(_scale);
batch._glLineWidth(3.0f);
do {
const FBXJoint& joint = geometry.joints.at(jointIndex);
const JointState& jointState = _jointStates.at(jointIndex);
glm::vec3 position = _rotation * jointState.getPosition() + _translation;
glm::quat parentRotation = (joint.parentIndex == -1) ? _rotation : _rotation * _jointStates.at(joint.parentIndex).getRotation();
float fanScale = directionSize * 0.75f;
Transform transform = Transform();
transform.setTranslation(position);
transform.setRotation(parentRotation);
transform.setScale(fanScale);
batch.setModelTransform(transform);
const int AXIS_COUNT = 3;
auto geometryCache = DependencyManager::get<GeometryCache>();
for (int i = 0; i < AXIS_COUNT; i++) {
if (joint.rotationMin[i] <= -PI + EPSILON && joint.rotationMax[i] >= PI - EPSILON) {
continue; // unconstrained
}
glm::vec3 axis;
axis[i] = 1.0f;
glm::vec3 otherAxis;
if (i == 0) {
otherAxis.y = 1.0f;
} else {
otherAxis.x = 1.0f;
}
glm::vec4 color(otherAxis.r, otherAxis.g, otherAxis.b, 0.75f);
QVector<glm::vec3> points;
points << glm::vec3(0.0f, 0.0f, 0.0f);
const int FAN_SEGMENTS = 16;
for (int j = 0; j < FAN_SEGMENTS; j++) {
glm::vec3 rotated = glm::angleAxis(glm::mix(joint.rotationMin[i], joint.rotationMax[i],
(float)j / (FAN_SEGMENTS - 1)), axis) * otherAxis;
points << rotated;
}
// TODO: this is really inefficient constantly recreating these vertices buffers. It would be
// better if the skeleton model cached these buffers for each of the joints they are rendering
geometryCache->updateVertices(_triangleFanID, points, color);
geometryCache->renderVertices(batch, gpu::TRIANGLE_FAN, _triangleFanID);
}
renderOrientationDirections(jointIndex, position, _rotation * jointState.getRotation(), directionSize);
jointIndex = joint.parentIndex;
} while (jointIndex != -1 && geometry.joints.at(jointIndex).isFree);
}
void SkeletonModel::renderBoundingCollisionShapes(gpu::Batch& batch, float alpha) {
const int BALL_SUBDIVISIONS = 10;
if (_shapes.isEmpty()) {
// the bounding shape has not been propery computed
// so no need to render it
return;
}
Application::getInstance()->loadTranslatedViewMatrix(_translation);
// draw a blue sphere at the capsule endpoint
glm::vec3 endPoint;
_boundingShape.getEndPoint(endPoint);
endPoint = endPoint - _translation;
Transform transform = Transform();
transform.setTranslation(endPoint);
batch.setModelTransform(transform);
auto geometryCache = DependencyManager::get<GeometryCache>();
geometryCache->renderSphere(batch, _boundingShape.getRadius(), BALL_SUBDIVISIONS, BALL_SUBDIVISIONS, glm::vec4(0.6f, 0.6f, 0.8f, alpha));
// draw a yellow sphere at the capsule startpoint
glm::vec3 startPoint;
_boundingShape.getStartPoint(startPoint);
startPoint = startPoint - _translation;
glm::vec3 axis = endPoint - startPoint;
glTranslatef(-axis.x, -axis.y, -axis.z);
geometryCache->renderSphere(_boundingShape.getRadius(), BALL_SUBDIVISIONS, BALL_SUBDIVISIONS, glm::vec4(0.8f, 0.8f, 0.6f, alpha));
// draw a green cylinder between the two points
glm::vec3 origin(0.0f);
Avatar::renderJointConnectingCone(batch, origin, axis, _boundingShape.getRadius(), _boundingShape.getRadius(), glm::vec4(0.6f, 0.8f, 0.6f, alpha));
}
void SkeletonModel::renderBoundingCollisionShapes(gpu::Batch& batch, float scale, float alpha) {
auto geometryCache = DependencyManager::get<GeometryCache>();
auto deferredLighting = DependencyManager::get<DeferredLightingEffect>();
// draw a blue sphere at the capsule top point
glm::vec3 topPoint = _translation + getRotation() * (scale * (_boundingCapsuleLocalOffset + (0.5f * _boundingCapsuleHeight) * Vectors::UNIT_Y));
deferredLighting->renderSolidSphereInstance(batch,
Transform().setTranslation(topPoint).postScale(scale * _boundingCapsuleRadius),
glm::vec4(0.6f, 0.6f, 0.8f, alpha));
// draw a yellow sphere at the capsule bottom point
glm::vec3 bottomPoint = topPoint - glm::vec3(0.0f, scale * _boundingCapsuleHeight, 0.0f);
glm::vec3 axis = topPoint - bottomPoint;
deferredLighting->renderSolidSphereInstance(batch,
Transform().setTranslation(bottomPoint).postScale(scale * _boundingCapsuleRadius),
glm::vec4(0.8f, 0.8f, 0.6f, alpha));
// draw a green cylinder between the two points
glm::vec3 origin(0.0f);
batch.setModelTransform(Transform().setTranslation(bottomPoint));
deferredLighting->bindSimpleProgram(batch);
Avatar::renderJointConnectingCone(batch, origin, axis, scale * _boundingCapsuleRadius, scale * _boundingCapsuleRadius,
glm::vec4(0.6f, 0.8f, 0.6f, alpha));
}
void SkeletonModel::renderBoundingCollisionShapes(RenderArgs* args, gpu::Batch& batch, float scale, float alpha) {
auto geometryCache = DependencyManager::get<GeometryCache>();
// draw a blue sphere at the capsule top point
glm::vec3 topPoint = _translation + _rotation * (scale * (_boundingCapsuleLocalOffset + (0.5f * _boundingCapsuleHeight) * Vectors::UNIT_Y));
batch.setModelTransform(Transform().setTranslation(topPoint).postScale(scale * _boundingCapsuleRadius));
geometryCache->renderSolidSphereInstance(args, batch, glm::vec4(0.6f, 0.6f, 0.8f, alpha));
// draw a yellow sphere at the capsule bottom point
glm::vec3 bottomPoint = topPoint - _rotation * glm::vec3(0.0f, scale * _boundingCapsuleHeight, 0.0f);
batch.setModelTransform(Transform().setTranslation(bottomPoint).postScale(scale * _boundingCapsuleRadius));
geometryCache->renderSolidSphereInstance(args, batch, glm::vec4(0.8f, 0.8f, 0.6f, alpha));
// draw a green cylinder between the two points
float capsuleDiameter = 2.0f * _boundingCapsuleRadius;
glm::vec3 cylinderDimensions = glm::vec3(capsuleDiameter, _boundingCapsuleHeight, capsuleDiameter);
batch.setModelTransform(Transform().setScale(scale * cylinderDimensions).setRotation(_rotation).setTranslation(0.5f * (topPoint + bottomPoint)));
geometryCache->renderSolidShapeInstance(args, batch, GeometryCache::Shape::Cylinder, glm::vec4(0.6f, 0.8f, 0.6f, alpha));
}
void renderWorldBox(gpu::Batch& batch) {
auto geometryCache = DependencyManager::get<GeometryCache>();
// Show edge of world
static const glm::vec3 red(1.0f, 0.0f, 0.0f);
static const glm::vec3 green(0.0f, 1.0f, 0.0f);
static const glm::vec3 blue(0.0f, 0.0f, 1.0f);
static const glm::vec3 grey(0.5f, 0.5f, 0.5f);
auto transform = Transform{};
batch.setModelTransform(transform);
// TODO - consider alternate rendering for negative build-able space in the domain
geometryCache->renderLine(batch, glm::vec3(0.0f, 0.0f, 0.0f), glm::vec3(HALF_TREE_SCALE, 0.0f, 0.0f), red);
geometryCache->renderLine(batch, glm::vec3(0.0f, 0.0f, 0.0f), glm::vec3(0.0f, HALF_TREE_SCALE, 0.0f), green);
geometryCache->renderLine(batch, glm::vec3(0.0f, 0.0f, 0.0f), glm::vec3(0.0f, 0.0f, HALF_TREE_SCALE), blue);
geometryCache->renderLine(batch, glm::vec3(0.0f, 0.0f, HALF_TREE_SCALE), glm::vec3(HALF_TREE_SCALE, 0.0f, HALF_TREE_SCALE), grey);
geometryCache->renderLine(batch, glm::vec3(HALF_TREE_SCALE, 0.0f, HALF_TREE_SCALE), glm::vec3(HALF_TREE_SCALE, 0.0f, 0.0f), grey);
// Draw meter markers along the 3 axis to help with measuring things
const float MARKER_DISTANCE = 1.0f;
const float MARKER_RADIUS = 0.05f;
geometryCache->renderSphere(batch, MARKER_RADIUS, 10, 10, red);
transform.setTranslation(glm::vec3(MARKER_DISTANCE, 0.0f, 0.0f));
batch.setModelTransform(transform);
geometryCache->renderSphere(batch, MARKER_RADIUS, 10, 10, red);
transform.setTranslation(glm::vec3(0.0f, MARKER_DISTANCE, 0.0f));
batch.setModelTransform(transform);
geometryCache->renderSphere(batch, MARKER_RADIUS, 10, 10, green);
transform.setTranslation(glm::vec3(0.0f, 0.0f, MARKER_DISTANCE));
batch.setModelTransform(transform);
geometryCache->renderSphere(batch, MARKER_RADIUS, 10, 10, blue);
transform.setTranslation(glm::vec3(MARKER_DISTANCE, 0.0f, MARKER_DISTANCE));
batch.setModelTransform(transform);
geometryCache->renderSphere(batch, MARKER_RADIUS, 10, 10, grey);
}
void SkeletonModel::renderBoundingCollisionShapes(gpu::Batch& batch, float alpha) {
const int BALL_SUBDIVISIONS = 10;
if (_shapes.isEmpty()) {
// the bounding shape has not been properly computed
// so no need to render it
return;
}
auto geometryCache = DependencyManager::get<GeometryCache>();
auto deferredLighting = DependencyManager::get<DeferredLightingEffect>();
Transform transform; // = Transform();
// draw a blue sphere at the capsule end point
glm::vec3 endPoint;
_boundingShape.getEndPoint(endPoint);
endPoint = endPoint + _translation;
transform.setTranslation(endPoint);
batch.setModelTransform(transform);
deferredLighting->bindSimpleProgram(batch);
geometryCache->renderSphere(batch, _boundingShape.getRadius(), BALL_SUBDIVISIONS, BALL_SUBDIVISIONS,
glm::vec4(0.6f, 0.6f, 0.8f, alpha));
// draw a yellow sphere at the capsule start point
glm::vec3 startPoint;
_boundingShape.getStartPoint(startPoint);
startPoint = startPoint + _translation;
glm::vec3 axis = endPoint - startPoint;
transform.setTranslation(startPoint);
batch.setModelTransform(transform);
deferredLighting->bindSimpleProgram(batch);
geometryCache->renderSphere(batch, _boundingShape.getRadius(), BALL_SUBDIVISIONS, BALL_SUBDIVISIONS,
glm::vec4(0.8f, 0.8f, 0.6f, alpha));
// draw a green cylinder between the two points
glm::vec3 origin(0.0f);
Avatar::renderJointConnectingCone(batch, origin, axis, _boundingShape.getRadius(), _boundingShape.getRadius(),
glm::vec4(0.6f, 0.8f, 0.6f, alpha));
}
void ModelMeshPartPayload::bindTransform(gpu::Batch& batch, const ShapePipeline::LocationsPointer locations, bool canCauterize) const {
// Still relying on the raw data from the model
const Model::MeshState& state = _model->_meshStates.at(_meshIndex);
Transform transform;
if (state.clusterBuffer) {
if (canCauterize && _model->getCauterizeBones()) {
batch.setUniformBuffer(ShapePipeline::Slot::BUFFER::SKINNING, state.cauterizedClusterBuffer);
} else {
batch.setUniformBuffer(ShapePipeline::Slot::BUFFER::SKINNING, state.clusterBuffer);
}
} else {
if (canCauterize && _model->getCauterizeBones()) {
transform = Transform(state.cauterizedClusterMatrices[0]);
} else {
transform = Transform(state.clusterMatrices[0]);
}
}
transform.preTranslate(_transform.getTranslation());
batch.setModelTransform(transform);
}
void ViveControllerManager::renderHand(const controller::Pose& pose, gpu::Batch& batch, int sign) {
auto userInputMapper = DependencyManager::get<controller::UserInputMapper>();
Transform transform(userInputMapper->getSensorToWorldMat());
transform.postTranslate(pose.getTranslation() + pose.getRotation() * glm::vec3(0, 0, CONTROLLER_LENGTH_OFFSET));
glm::quat rotation = pose.getRotation() * glm::angleAxis(PI, glm::vec3(1.0f, 0.0f, 0.0f)) * glm::angleAxis(sign * PI_OVER_TWO, glm::vec3(0.0f, 0.0f, 1.0f));
transform.postRotate(rotation);
batch.setModelTransform(transform);
auto mesh = _modelGeometry.getMesh();
batch.setInputBuffer(gpu::Stream::POSITION, mesh->getVertexBuffer());
batch.setInputBuffer(gpu::Stream::NORMAL,
mesh->getVertexBuffer()._buffer,
sizeof(float) * 3,
mesh->getVertexBuffer()._stride);
//batch.setInputBuffer(gpu::Stream::TEXCOORD,
// mesh->getVertexBuffer()._buffer,
// 2 * 3 * sizeof(float),
// mesh->getVertexBuffer()._stride);
batch.setIndexBuffer(gpu::UINT16, mesh->getIndexBuffer()._buffer, 0);
batch.drawIndexed(gpu::TRIANGLES, mesh->getNumIndices(), 0);
}
void ProceduralSkybox::render(gpu::Batch& batch, const ViewFrustum& viewFrustum, const ProceduralSkybox& skybox) {
if (!(skybox._procedural)) {
Skybox::render(batch, viewFrustum, skybox);
}
static gpu::BufferPointer theBuffer;
static gpu::Stream::FormatPointer theFormat;
if (skybox._procedural && skybox._procedural->_enabled && skybox._procedural->ready()) {
if (!theBuffer) {
const float CLIP = 1.0f;
const glm::vec2 vertices[4] = { { -CLIP, -CLIP }, { CLIP, -CLIP }, { -CLIP, CLIP }, { CLIP, CLIP } };
theBuffer = std::make_shared<gpu::Buffer>(sizeof(vertices), (const gpu::Byte*) vertices);
theFormat = std::make_shared<gpu::Stream::Format>();
theFormat->setAttribute(gpu::Stream::POSITION, gpu::Stream::POSITION, gpu::Element(gpu::VEC2, gpu::FLOAT, gpu::XYZ));
}
glm::mat4 projMat;
viewFrustum.evalProjectionMatrix(projMat);
Transform viewTransform;
viewFrustum.evalViewTransform(viewTransform);
batch.setProjectionTransform(projMat);
batch.setViewTransform(viewTransform);
batch.setModelTransform(Transform()); // only for Mac
batch.setInputBuffer(gpu::Stream::POSITION, theBuffer, 0, 8);
batch.setInputFormat(theFormat);
if (skybox.getCubemap() && skybox.getCubemap()->isDefined()) {
batch.setResourceTexture(0, skybox.getCubemap());
}
skybox._procedural->prepare(batch, glm::vec3(1));
batch.draw(gpu::TRIANGLE_STRIP, 4);
}
}
void WorldBoxRenderData::renderWorldBox(RenderArgs* args, gpu::Batch& batch) {
auto geometryCache = DependencyManager::get<GeometryCache>();
// Show center of world
static const glm::vec3 RED(1.0f, 0.0f, 0.0f);
static const glm::vec3 GREEN(0.0f, 1.0f, 0.0f);
static const glm::vec3 BLUE(0.0f, 0.0f, 1.0f);
static const glm::vec3 GREY(0.5f, 0.5f, 0.5f);
static const glm::vec4 GREY4(0.5f, 0.5f, 0.5f, 1.0f);
static const glm::vec4 DASHED_RED(1.0f, 0.0f, 0.0f, 1.0f);
static const glm::vec4 DASHED_GREEN(0.0f, 1.0f, 0.0f, 1.0f);
static const glm::vec4 DASHED_BLUE(0.0f, 0.0f, 1.0f, 1.0f);
static const float DASH_LENGTH = 1.0f;
static const float GAP_LENGTH = 1.0f;
auto transform = Transform{};
static std::array<int, 18> geometryIds;
static std::once_flag initGeometryIds;
std::call_once(initGeometryIds, [&] {
for (size_t i = 0; i < geometryIds.size(); ++i) {
geometryIds[i] = geometryCache->allocateID();
}
});
batch.setModelTransform(transform);
geometryCache->renderLine(batch, glm::vec3(0.0f, 0.0f, 0.0f), glm::vec3(HALF_TREE_SCALE, 0.0f, 0.0f), RED, geometryIds[0]);
geometryCache->renderDashedLine(batch, glm::vec3(0.0f, 0.0f, 0.0f), glm::vec3(-HALF_TREE_SCALE, 0.0f, 0.0f), DASHED_RED,
DASH_LENGTH, GAP_LENGTH, geometryIds[1]);
geometryCache->renderLine(batch, glm::vec3(0.0f, 0.0f, 0.0f), glm::vec3(0.0f, HALF_TREE_SCALE, 0.0f), GREEN, geometryIds[2]);
geometryCache->renderDashedLine(batch, glm::vec3(0.0f, 0.0f, 0.0f), glm::vec3(0.0f, -HALF_TREE_SCALE, 0.0f), DASHED_GREEN,
DASH_LENGTH, GAP_LENGTH, geometryIds[3]);
geometryCache->renderLine(batch, glm::vec3(0.0f, 0.0f, 0.0f), glm::vec3(0.0f, 0.0f, HALF_TREE_SCALE), BLUE, geometryIds[4]);
geometryCache->renderDashedLine(batch, glm::vec3(0.0f, 0.0f, 0.0f), glm::vec3(0.0f, 0.0f, -HALF_TREE_SCALE), DASHED_BLUE,
DASH_LENGTH, GAP_LENGTH, geometryIds[5]);
// X center boundaries
geometryCache->renderLine(batch, glm::vec3(-HALF_TREE_SCALE, -HALF_TREE_SCALE, 0.0f),
glm::vec3(HALF_TREE_SCALE, -HALF_TREE_SCALE, 0.0f), GREY,
geometryIds[6]);
geometryCache->renderLine(batch, glm::vec3(-HALF_TREE_SCALE, -HALF_TREE_SCALE, 0.0f),
glm::vec3(-HALF_TREE_SCALE, HALF_TREE_SCALE, 0.0f), GREY,
geometryIds[7]);
geometryCache->renderLine(batch, glm::vec3(-HALF_TREE_SCALE, HALF_TREE_SCALE, 0.0f),
glm::vec3(HALF_TREE_SCALE, HALF_TREE_SCALE, 0.0f), GREY,
geometryIds[8]);
geometryCache->renderLine(batch, glm::vec3(HALF_TREE_SCALE, -HALF_TREE_SCALE, 0.0f),
glm::vec3(HALF_TREE_SCALE, HALF_TREE_SCALE, 0.0f), GREY,
geometryIds[9]);
// Z center boundaries
geometryCache->renderLine(batch, glm::vec3(0.0f, -HALF_TREE_SCALE, -HALF_TREE_SCALE),
glm::vec3(0.0f, -HALF_TREE_SCALE, HALF_TREE_SCALE), GREY,
geometryIds[10]);
geometryCache->renderLine(batch, glm::vec3(0.0f, -HALF_TREE_SCALE, -HALF_TREE_SCALE),
glm::vec3(0.0f, HALF_TREE_SCALE, -HALF_TREE_SCALE), GREY,
geometryIds[11]);
geometryCache->renderLine(batch, glm::vec3(0.0f, HALF_TREE_SCALE, -HALF_TREE_SCALE),
glm::vec3(0.0f, HALF_TREE_SCALE, HALF_TREE_SCALE), GREY,
geometryIds[12]);
geometryCache->renderLine(batch, glm::vec3(0.0f, -HALF_TREE_SCALE, HALF_TREE_SCALE),
glm::vec3(0.0f, HALF_TREE_SCALE, HALF_TREE_SCALE), GREY,
geometryIds[13]);
// Center boundaries
geometryCache->renderLine(batch, glm::vec3(-HALF_TREE_SCALE, 0.0f, -HALF_TREE_SCALE),
glm::vec3(-HALF_TREE_SCALE, 0.0f, HALF_TREE_SCALE), GREY,
geometryIds[14]);
geometryCache->renderLine(batch, glm::vec3(-HALF_TREE_SCALE, 0.0f, -HALF_TREE_SCALE),
glm::vec3(HALF_TREE_SCALE, 0.0f, -HALF_TREE_SCALE), GREY,
geometryIds[15]);
geometryCache->renderLine(batch, glm::vec3(HALF_TREE_SCALE, 0.0f, -HALF_TREE_SCALE),
glm::vec3(HALF_TREE_SCALE, 0.0f, HALF_TREE_SCALE), GREY,
geometryIds[16]);
geometryCache->renderLine(batch, glm::vec3(-HALF_TREE_SCALE, 0.0f, HALF_TREE_SCALE),
glm::vec3(HALF_TREE_SCALE, 0.0f, HALF_TREE_SCALE), GREY,
geometryIds[17]);
geometryCache->renderWireCubeInstance(args, batch, GREY4);
// Draw meter markers along the 3 axis to help with measuring things
const float MARKER_DISTANCE = 1.0f;
const float MARKER_RADIUS = 0.05f;
transform = Transform().setScale(MARKER_RADIUS);
batch.setModelTransform(transform);
geometryCache->renderSolidSphereInstance(args, batch, RED);
transform = Transform().setTranslation(glm::vec3(MARKER_DISTANCE, 0.0f, 0.0f)).setScale(MARKER_RADIUS);
batch.setModelTransform(transform);
geometryCache->renderSolidSphereInstance(args, batch, RED);
transform = Transform().setTranslation(glm::vec3(0.0f, MARKER_DISTANCE, 0.0f)).setScale(MARKER_RADIUS);
batch.setModelTransform(transform);
geometryCache->renderSolidSphereInstance(args, batch, GREEN);
transform = Transform().setTranslation(glm::vec3(0.0f, 0.0f, MARKER_DISTANCE)).setScale(MARKER_RADIUS);
batch.setModelTransform(transform);
geometryCache->renderSolidSphereInstance(args, batch, BLUE);
transform = Transform().setTranslation(glm::vec3(MARKER_DISTANCE, 0.0f, MARKER_DISTANCE)).setScale(MARKER_RADIUS);
batch.setModelTransform(transform);
geometryCache->renderSolidSphereInstance(args, batch, GREY);
}
void Skybox::render(gpu::Batch& batch, const ViewFrustum& viewFrustum, const Skybox& skybox) {
if (skybox.getCubemap() && skybox.getCubemap()->isDefined()) {
static gpu::PipelinePointer thePipeline;
static gpu::BufferPointer theBuffer;
static gpu::Stream::FormatPointer theFormat;
static gpu::BufferPointer theConstants;
int SKYBOX_CONSTANTS_SLOT = 0; // need to be defined by the compilation of the shader
if (!thePipeline) {
auto skyVS = gpu::ShaderPointer(gpu::Shader::createVertex(std::string(Skybox_vert)));
auto skyFS = gpu::ShaderPointer(gpu::Shader::createPixel(std::string(Skybox_frag)));
auto skyShader = gpu::ShaderPointer(gpu::Shader::createProgram(skyVS, skyFS));
gpu::Shader::BindingSet bindings;
bindings.insert(gpu::Shader::Binding(std::string("cubeMap"), 0));
if (!gpu::Shader::makeProgram(*skyShader, bindings)) {
}
SKYBOX_CONSTANTS_SLOT = skyShader->getBuffers().findLocation("skyboxBuffer");
if (SKYBOX_CONSTANTS_SLOT == gpu::Shader::INVALID_LOCATION) {
SKYBOX_CONSTANTS_SLOT = skyShader->getUniforms().findLocation("skyboxBuffer");
}
auto skyState = gpu::StatePointer(new gpu::State());
thePipeline = gpu::PipelinePointer(gpu::Pipeline::create(skyShader, skyState));
const float CLIP = 1.0;
const glm::vec2 vertices[4] = { {-CLIP, -CLIP}, {CLIP, -CLIP}, {-CLIP, CLIP}, {CLIP, CLIP}};
theBuffer.reset(new gpu::Buffer(sizeof(vertices), (const gpu::Byte*) vertices));
theFormat.reset(new gpu::Stream::Format());
theFormat->setAttribute(gpu::Stream::POSITION, gpu::Stream::POSITION, gpu::Element(gpu::VEC2, gpu::FLOAT, gpu::XYZ));
auto color = glm::vec4(1.0f);
theConstants.reset(new gpu::Buffer(sizeof(color), (const gpu::Byte*) &color));
}
glm::mat4 projMat;
viewFrustum.evalProjectionMatrix(projMat);
Transform viewTransform;
viewFrustum.evalViewTransform(viewTransform);
if (glm::all(glm::equal(skybox.getColor(), glm::vec3(0.0f)))) {
auto color = glm::vec4(1.0f);
theConstants->setSubData(0, sizeof(color), (const gpu::Byte*) &color);
} else {
theConstants->setSubData(0, sizeof(Color), (const gpu::Byte*) &skybox.getColor());
}
batch.setProjectionTransform(projMat);
batch.setViewTransform(viewTransform);
batch.setModelTransform(Transform()); // only for Mac
batch.setPipeline(thePipeline);
batch.setInputBuffer(gpu::Stream::POSITION, theBuffer, 0, 8);
batch.setUniformBuffer(SKYBOX_CONSTANTS_SLOT, theConstants, 0, theConstants->getSize());
batch.setInputFormat(theFormat);
batch.setUniformTexture(0, skybox.getCubemap());
batch.draw(gpu::TRIANGLE_STRIP, 4);
} else {
// skybox has no cubemap, just clear the color buffer
auto color = skybox.getColor();
batch.clearFramebuffer(gpu::Framebuffer::BUFFER_COLOR0, glm::vec4(skybox.getColor(),1.0f), 0.f, 0);
}
}
void renderWorldBox(gpu::Batch& batch) {
auto geometryCache = DependencyManager::get<GeometryCache>();
// Show center of world
static const glm::vec3 RED(1.0f, 0.0f, 0.0f);
static const glm::vec3 GREEN(0.0f, 1.0f, 0.0f);
static const glm::vec3 BLUE(0.0f, 0.0f, 1.0f);
static const glm::vec3 GREY(0.5f, 0.5f, 0.5f);
static const glm::vec4 GREY4(0.5f, 0.5f, 0.5f, 1.0f);
static const glm::vec4 DASHED_RED(1.0f, 0.0f, 0.0f, 1.0f);
static const glm::vec4 DASHED_GREEN(0.0f, 1.0f, 0.0f, 1.0f);
static const glm::vec4 DASHED_BLUE(0.0f, 0.0f, 1.0f, 1.0f);
static const float DASH_LENGTH = 1.0f;
static const float GAP_LENGTH = 1.0f;
auto transform = Transform{};
batch.setModelTransform(transform);
geometryCache->renderLine(batch, glm::vec3(0.0f, 0.0f, 0.0f), glm::vec3(HALF_TREE_SCALE, 0.0f, 0.0f), RED);
geometryCache->renderDashedLine(batch, glm::vec3(0.0f, 0.0f, 0.0f), glm::vec3(-HALF_TREE_SCALE, 0.0f, 0.0f), DASHED_RED,
DASH_LENGTH, GAP_LENGTH);
geometryCache->renderLine(batch, glm::vec3(0.0f, 0.0f, 0.0f), glm::vec3(0.0f, HALF_TREE_SCALE, 0.0f), GREEN);
geometryCache->renderDashedLine(batch, glm::vec3(0.0f, 0.0f, 0.0f), glm::vec3(0.0f, -HALF_TREE_SCALE, 0.0f), DASHED_GREEN,
DASH_LENGTH, GAP_LENGTH);
geometryCache->renderLine(batch, glm::vec3(0.0f, 0.0f, 0.0f), glm::vec3(0.0f, 0.0f, HALF_TREE_SCALE), BLUE);
geometryCache->renderDashedLine(batch, glm::vec3(0.0f, 0.0f, 0.0f), glm::vec3(0.0f, 0.0f, -HALF_TREE_SCALE), DASHED_BLUE,
DASH_LENGTH, GAP_LENGTH);
// X center boundaries
geometryCache->renderLine(batch, glm::vec3(-HALF_TREE_SCALE, -HALF_TREE_SCALE, 0.0f),
glm::vec3(HALF_TREE_SCALE, -HALF_TREE_SCALE, 0.0f), GREY);
geometryCache->renderLine(batch, glm::vec3(-HALF_TREE_SCALE, -HALF_TREE_SCALE, 0.0f),
glm::vec3(-HALF_TREE_SCALE, HALF_TREE_SCALE, 0.0f), GREY);
geometryCache->renderLine(batch, glm::vec3(-HALF_TREE_SCALE, HALF_TREE_SCALE, 0.0f),
glm::vec3(HALF_TREE_SCALE, HALF_TREE_SCALE, 0.0f), GREY);
geometryCache->renderLine(batch, glm::vec3(HALF_TREE_SCALE, -HALF_TREE_SCALE, 0.0f),
glm::vec3(HALF_TREE_SCALE, HALF_TREE_SCALE, 0.0f), GREY);
// Z center boundaries
geometryCache->renderLine(batch, glm::vec3(0.0f, -HALF_TREE_SCALE, -HALF_TREE_SCALE),
glm::vec3(0.0f, -HALF_TREE_SCALE, HALF_TREE_SCALE), GREY);
geometryCache->renderLine(batch, glm::vec3(0.0f, -HALF_TREE_SCALE, -HALF_TREE_SCALE),
glm::vec3(0.0f, HALF_TREE_SCALE, -HALF_TREE_SCALE), GREY);
geometryCache->renderLine(batch, glm::vec3(0.0f, HALF_TREE_SCALE, -HALF_TREE_SCALE),
glm::vec3(0.0f, HALF_TREE_SCALE, HALF_TREE_SCALE), GREY);
geometryCache->renderLine(batch, glm::vec3(0.0f, -HALF_TREE_SCALE, HALF_TREE_SCALE),
glm::vec3(0.0f, HALF_TREE_SCALE, HALF_TREE_SCALE), GREY);
// Center boundaries
geometryCache->renderLine(batch, glm::vec3(-HALF_TREE_SCALE, 0.0f, -HALF_TREE_SCALE),
glm::vec3(-HALF_TREE_SCALE, 0.0f, HALF_TREE_SCALE), GREY);
geometryCache->renderLine(batch, glm::vec3(-HALF_TREE_SCALE, 0.0f, -HALF_TREE_SCALE),
glm::vec3(HALF_TREE_SCALE, 0.0f, -HALF_TREE_SCALE), GREY);
geometryCache->renderLine(batch, glm::vec3(HALF_TREE_SCALE, 0.0f, -HALF_TREE_SCALE),
glm::vec3(HALF_TREE_SCALE, 0.0f, HALF_TREE_SCALE), GREY);
geometryCache->renderLine(batch, glm::vec3(-HALF_TREE_SCALE, 0.0f, HALF_TREE_SCALE),
glm::vec3(HALF_TREE_SCALE, 0.0f, HALF_TREE_SCALE), GREY);
geometryCache->renderWireCubeInstance(batch, GREY4);
// Draw meter markers along the 3 axis to help with measuring things
const float MARKER_DISTANCE = 1.0f;
const float MARKER_RADIUS = 0.05f;
transform = Transform().setScale(MARKER_RADIUS);
batch.setModelTransform(transform);
geometryCache->renderSolidSphereInstance(batch, RED);
transform = Transform().setTranslation(glm::vec3(MARKER_DISTANCE, 0.0f, 0.0f)).setScale(MARKER_RADIUS);
batch.setModelTransform(transform);
geometryCache->renderSolidSphereInstance(batch, RED);
transform = Transform().setTranslation(glm::vec3(0.0f, MARKER_DISTANCE, 0.0f)).setScale(MARKER_RADIUS);
batch.setModelTransform(transform);
geometryCache->renderSolidSphereInstance(batch, GREEN);
transform = Transform().setTranslation(glm::vec3(0.0f, 0.0f, MARKER_DISTANCE)).setScale(MARKER_RADIUS);
batch.setModelTransform(transform);
geometryCache->renderSolidSphereInstance(batch, BLUE);
transform = Transform().setTranslation(glm::vec3(MARKER_DISTANCE, 0.0f, MARKER_DISTANCE)).setScale(MARKER_RADIUS);
batch.setModelTransform(transform);
geometryCache->renderSolidSphereInstance(batch, GREY);
}
void MeshPartPayload::bindTransform(gpu::Batch& batch, const ShapePipeline::LocationsPointer locations, bool canCauterize) const {
batch.setModelTransform(_drawTransform);
}
void MeshPartPayload::bindTransform(gpu::Batch& batch, const ShapePipeline::LocationsPointer locations, RenderArgs::RenderMode renderMode) const {
batch.setModelTransform(_drawTransform);
}
