Exemple #1
0
/*
 * Reset the pool to the state when it was created.
 * All blocks will be deallocated except the first block. All memory areas
 * are marked as free.
 */
static void reset_pool(pj_pool_t *pool)
{
    pj_pool_block *block;

    PJ_CHECK_STACK();

    block = pool->block_list.prev;
    if (block == &pool->block_list)
	return;

    /* Skip the first block because it is occupying the same memory
       as the pool itself.
    */
    block = block->prev;
    
    while (block != &pool->block_list) {
	pj_pool_block *prev = block->prev;
	pj_list_erase(block);
	(*pool->factory->policy.block_free)(pool->factory, block, 
					    block->end - (unsigned char*)block);
	block = prev;
    }

    block = pool->block_list.next;

    /* Set the start pointer, aligning it as needed */
    block->cur = ALIGN_PTR(block->buf, PJ_POOL_ALIGNMENT);

    pool->capacity = block->end - (unsigned char*)pool;
}
Exemple #2
0
MemoryPool* initPool(size_t size, size_t increment)
{
	MemoryPool *pool;
	MemoryBlock *block;
	void *buffer;

	ASSERT_RETURN(size >= sizeof(MemoryPool)+sizeof(MemoryBlock), NULL);

	buffer=malloc(size+sizeof(*pool)+sizeof(*block));
	if (!buffer)
		return NULL;

	// Initialize first memory block
	block = (MemoryBlock*) ((size_t)buffer+sizeof(*pool));
	block->next = NULL;
	block->start=(void*)((size_t)block+sizeof(*block));
	block->pos=ALIGN_PTR(block->start, POOL_ALIGNMENT);
	block->end=block->start+size;

	// Initialize pool
	pool = (MemoryPool*) buffer;
	pool->lastAlloc = 0;
	pool->capacity = size;
	pool->increment = (increment) ? increment : (size_t)sysconf(_SC_PAGESIZE);
	pool->base=block;
	pool->cur=block;

	PRINT("Pool created, used size=%ld, capacity=%ld, increment size=%ld", (((size_t)(pool->cur->start)) - (size_t)pool), pool->capacity, pool->increment);

	return pool;
}
Exemple #3
0
Fichier : heap.c Projet : iXit/wine
static void* msvcrt_heap_realloc(DWORD flags, void *ptr, MSVCRT_size_t size)
{
    if(sb_heap && ptr && !HeapValidate(heap, 0, ptr))
    {
        /* TODO: move data to normal heap if it exceeds sbh_threshold limit */
        void *memblock, *temp, **saved;
        MSVCRT_size_t old_padding, new_padding, old_size;

        saved = SAVED_PTR(ptr);
        old_padding = (char*)ptr - (char*)*saved;
        old_size = HeapSize(sb_heap, 0, *saved);
        if(old_size == -1)
            return NULL;
        old_size -= old_padding;

        temp = HeapReAlloc(sb_heap, flags, *saved, size+sizeof(void*)+SB_HEAP_ALIGN);
        if(!temp) return NULL;

        memblock = ALIGN_PTR(temp, SB_HEAP_ALIGN, 0);
        saved = SAVED_PTR(memblock);
        new_padding = (char*)memblock - (char*)temp;

        if(new_padding != old_padding)
            memmove(memblock, (char*)temp+old_padding, old_size>size ? size : old_size);

        *saved = temp;
        return memblock;
    }

    return HeapReAlloc(heap, flags, ptr, size);
}
Exemple #4
0
/*
 * Create new block.
 * Create a new big chunk of memory block, from which user allocation will be
 * taken from.
 */
static pj_pool_block *pj_pool_create_block( pj_pool_t *pool, pj_size_t size)
{
    pj_pool_block *block;

    PJ_CHECK_STACK();
    pj_assert(size >= sizeof(pj_pool_block));

    LOG((pool->obj_name, "create_block(sz=%u), cur.cap=%u, cur.used=%u", 
	 size, pool->capacity, pj_pool_get_used_size(pool)));

    /* Request memory from allocator. */
    block = (pj_pool_block*) 
	(*pool->factory->policy.block_alloc)(pool->factory, size);
    if (block == NULL) {
	(*pool->callback)(pool, size);
	return NULL;
    }

    /* Add capacity. */
    pool->capacity += size;

    /* Set start and end of buffer. */
    block->buf = ((unsigned char*)block) + sizeof(pj_pool_block);
    block->end = ((unsigned char*)block) + size;

    /* Set the start pointer, aligning it as needed */
    block->cur = ALIGN_PTR(block->buf, PJ_POOL_ALIGNMENT);

    /* Insert in the front of the list. */
    pj_list_insert_after(&pool->block_list, block);

    LOG((pool->obj_name," block created, buffer=%p-%p",block->buf, block->end));

    return block;
}
Exemple #5
0
/**
 * Allocate memory from hunk managed by the UI code
 * This memory is allocated one time, and never released.
 * @param size Quantity of memory expected
 * @param align Alignement of the expected memory
 * @param reset If true initilize the memory with 0
 * @return available memory, else nullptr
 */
void* UI_AllocHunkMemory (size_t size, int align, bool reset)
{
	byte* memory = (byte*) ALIGN_PTR(ui_global.curadata, align);
	if (memory + size > ui_global.adata + ui_global.adataize)
		return nullptr;
	if (reset)
		memset(memory, 0, size);
	ui_global.curadata = memory + size;
	return memory;
}
Exemple #6
0
void rst_endevent(rst_buffer_t * ptr)
{
    ptr->rst_buffer_ptr = ALIGN_PTR(ptr->rst_buffer_ptr);
    if (RST_BUF_COUNT(ptr) > (RST_BUF_SIZE(ptr) - RST_MAX_EVENT_SIZE)) {
      fprintf(stderr, "librastro: Buffer size exceeded, flushing to disk. "
          "Consider using a larger buffer size, defined by the environment "
          "variable RST_BUFFER_SIZE\n");
        rst_flush(ptr);
    }
}
Exemple #7
0
void *FDKaalloc_L(const UINT size, const UINT alignment, MEMORY_SECTION s)
{
  void *addr, *result=NULL;
  addr = FDKcalloc_L(1, size + alignment + sizeof(void*), s);       /* Malloc and clear memory.         */

  if (addr!=NULL)
  {
    result = ALIGN_PTR((unsigned char *)addr + sizeof(void*));    /* Get aligned memory base address. */
    *(((void**)result) - 1) = addr;                /* Save malloc'ed memory pointer.   */
  }

  return result;                                 /* Return aligned address.          */
}
Exemple #8
0
void releasePool(MemoryPool *pool)
{
	MemoryBlock *next=pool->base->next; // Skip first entry
	while(next!=NULL)
	{
		MemoryBlock *cur=next;
		next=next->next;
		pool->capacity -= (size_t)cur->end - (size_t)cur->start;
		free(cur);
	}
	pool->base->pos=ALIGN_PTR(pool->base->start, POOL_ALIGNMENT);
	pool->cur=pool->base;
	PRINT("Release pool, used size=%ld, capacity=%ld, increment size=%ld", (((size_t)(pool->cur->start)) - (size_t)pool), pool->capacity, pool->increment);
}
Exemple #9
0
/*
 * Create new memory pool.
 */
PJ_DEF(pj_pool_t*) pj_pool_create_int( pj_pool_factory *f, const char *name,
				       pj_size_t initial_size, 
				       pj_size_t increment_size,
				       pj_pool_callback *callback)
{
    pj_pool_t *pool;
    pj_pool_block *block;
    pj_uint8_t *buffer;

    PJ_CHECK_STACK();

    /* Size must be at least sizeof(pj_pool)+sizeof(pj_pool_block) */
    PJ_ASSERT_RETURN(initial_size >= sizeof(pj_pool_t)+sizeof(pj_pool_block),
		     NULL);

    /* If callback is NULL, set calback from the policy */
    if (callback == NULL)
	callback = f->policy.callback;

    /* Allocate initial block */
    buffer = (pj_uint8_t*) (*f->policy.block_alloc)(f, initial_size);
    if (!buffer)
	return NULL;

    /* Set pool administrative data. */
    pool = (pj_pool_t*)buffer;
    pj_bzero(pool, sizeof(*pool));

    pj_list_init(&pool->block_list);
    pool->factory = f;

    /* Create the first block from the memory. */
    block = (pj_pool_block*) (buffer + sizeof(*pool));
    block->buf = ((unsigned char*)block) + sizeof(pj_pool_block);
    block->end = buffer + initial_size;

    /* Set the start pointer, aligning it as needed */
    block->cur = ALIGN_PTR(block->buf, PJ_POOL_ALIGNMENT);

    pj_list_insert_after(&pool->block_list, block);

    pj_pool_init_int(pool, name, increment_size, callback);

    /* Pool initial capacity and used size */
    pool->capacity = initial_size;

    LOG((pool->obj_name, "pool created, size=%u", pool->capacity));
    return pool;
}
Exemple #10
0
void poolGrowTo(MemoryPool *pool, size_t size)
{
	assert(size >= sizeof(MemoryBlock));
	MemoryBlock *block=malloc(size+sizeof(MemoryBlock));
	assert(block!=NULL);
	block->next = NULL;

	block->start=(void*)((size_t)block+sizeof(*block));
	block->pos=ALIGN_PTR(block->start, POOL_ALIGNMENT);
	block->end=(void*)((size_t)block->start+size);

	pool->cur->next = block;
	pool->cur=block;
	pool->capacity+=size;

	PRINT("Grow to %ld, new capacity=%ld, new block %p, size block=%ld", size, pool->capacity, block, (size_t)block->end-(size_t)block->start);
}
Exemple #11
0
Fichier : heap.c Projet : iXit/wine
static void* msvcrt_heap_alloc(DWORD flags, MSVCRT_size_t size)
{
    if(size < MSVCRT_sbh_threshold)
    {
        void *memblock, *temp, **saved;

        temp = HeapAlloc(sb_heap, flags, size+sizeof(void*)+SB_HEAP_ALIGN);
        if(!temp) return NULL;

        memblock = ALIGN_PTR(temp, SB_HEAP_ALIGN, 0);
        saved = SAVED_PTR(memblock);
        *saved = temp;
        return memblock;
    }

    return HeapAlloc(heap, flags, size);
}
Exemple #12
0
/**
 * @brief Allocate a node into the UI memory (do notr call behaviour->new)
 * @note It's not a dynamic memory allocation. Please only use it at the loading time
 * @todo Assert out when we are not in parsing/loading stage
 * @param[in] name Name of the new node, else NULL if we dont want to edit it.
 * @param[in] type Name of the node behavior
 * @param[in] isDynamic Allocate a node in static or dynamic memory
 */
static uiNode_t* UI_AllocNodeWithoutNew (const char* name, const char* type, qboolean isDynamic)
{
	uiNode_t* node;
	uiBehaviour_t *behaviour;
	int nodeSize;

	behaviour = UI_GetNodeBehaviour(type);
	if (behaviour == NULL)
		Com_Error(ERR_FATAL, "UI_AllocNodeWithoutNew: Node behaviour '%s' doesn't exist", type);

	nodeSize = sizeof(*node) + behaviour->extraDataSize;

	if (!isDynamic) {
		if (ui_global.curadata + nodeSize > ui_global.adata + ui_global.adataize)
			Com_Error(ERR_FATAL, "UI_AllocNodeWithoutNew: No more memory to allocate a new node");
		/** @todo fix this hard coded '8' value */
		ui_global.curadata = ALIGN_PTR(ui_global.curadata, 8);
		node = (uiNode_t*) ui_global.curadata;
		ui_global.curadata += nodeSize;
		ui_global.numNodes++;
		memset(node, 0, nodeSize);
	} else {
		node = (uiNode_t*)Mem_PoolAlloc(nodeSize, ui_dynPool, 0);
		memset(node, 0, nodeSize);
		node->dynamic = qtrue;
	}

	node->behaviour = behaviour;
#ifdef DEBUG
	node->behaviour->count++;
#endif
	if (node->behaviour->isAbstract)
		Com_Error(ERR_FATAL, "UI_AllocNodeWithoutNew: Node behavior '%s' is abstract. We can't instantiate it.", type);

	if (name != NULL) {
		Q_strncpyz(node->name, name, sizeof(node->name));
		if (strlen(node->name) != strlen(name))
			Com_Printf("UI_AllocNodeWithoutNew: Node name \"%s\" truncated. New name is \"%s\"\n", name, node->name);
	}

	/* initialize default properties */
	if (node->behaviour->loading)
		node->behaviour->loading(node);

	return node;
}
Exemple #13
0
/*********************************************************************
 *		_aligned_offset_malloc (MSVCRT.@)
 */
void * CDECL _aligned_offset_malloc(MSVCRT_size_t size, MSVCRT_size_t alignment, MSVCRT_size_t offset)
{
    void *memblock, *temp, **saved;
    TRACE("(%lu, %lu, %lu)\n", size, alignment, offset);

    /* alignment must be a power of 2 */
    if ((alignment & (alignment - 1)) != 0)
    {
        *MSVCRT__errno() = MSVCRT_EINVAL;
        return NULL;
    }

    /* offset must be less than size */
    if (offset >= size)
    {
        *MSVCRT__errno() = MSVCRT_EINVAL;
        return NULL;
    }

    /* don't align to less than void pointer size */
    if (alignment < sizeof(void *))
        alignment = sizeof(void *);

    /* allocate enough space for void pointer and alignment */
    temp = MSVCRT_malloc(size + alignment + sizeof(void *));

    if (!temp)
        return NULL;

    /* adjust pointer for proper alignment and offset */
    memblock = ALIGN_PTR(temp, alignment, offset);

    /* Save the real allocation address below returned address */
    /* so it can be found later to free. */
    saved = SAVED_PTR(memblock);
    *saved = temp;

    return memblock;
}
Exemple #14
0
void *mem_pool_alloc(mem_pool_t *mem_pool, int size)
{
    char       *ptr      = NULL;
    mem_page_t *current  = NULL; 
    mem_page_t *new_page = NULL;
    void       *addr     = NULL;

    if(!mem_pool){
        printf("mem_pool is null.\n");
        return NULL;
    }

    /* 先判断size的大小是否超出了page size */
    if(size > mem_pool->page_size - (int)sizeof(mem_page_t)){
        printf("size > %lu.\n", mem_pool->page_size - sizeof(mem_page_t));
        return NULL;
    }

#ifdef MEM_POOL_LOCK 
    pthread_mutex_lock(&mem_pool->lock);
#endif

    /* 从现有的page链表中寻找空间分配 */
    current = mem_pool->current;
    while(current){
        ptr = ALIGN_PTR(current->last, PLATFORM_ALIGNMENT);

        /* 如果空间足够 */
        if((char *)current->end - ptr >= size){
            current->last = ptr + size;

#ifdef MEM_POOL_LOCK
            pthread_mutex_unlock(&mem_pool->lock);
#endif
            return ptr;
        }
        
        current->failed++;
        if(current->failed >= MAX_FAILED_COUNT){
            mem_pool->current = current->next;
        }

        current = current->next; 
    }

    /* 现有的page空间没有足够的空间分配,必须创建新的page */
    if(posix_memalign(&addr, mem_pool->page_size, mem_pool->page_size) != 0){
        printf("posix_memalign in mem_pool_alloc fails.\n");

#ifdef MEM_POOL_LOCK
        pthread_mutex_unlock(&mem_pool->lock);
#endif
        return NULL;
    }

    new_page         = (mem_page_t *)addr;
    new_page->start  = (char *)addr;
    new_page->last   = new_page->start + sizeof(mem_page_t);
    new_page->end    = (char *)addr + mem_pool->page_size;
    new_page->next   = NULL;
    new_page->failed = 0;
    mem_pool->page_count++;

    /* 将新增加的page添加到page的链表的末尾 */
    mem_pool->tail->next = new_page;
    mem_pool->tail       = new_page;

    if(NULL == mem_pool->current){
        mem_pool->current = new_page;
    }

    ptr = ALIGN_PTR(new_page->last, PLATFORM_ALIGNMENT);
    new_page->last = ptr + size;

#ifdef MEM_POOL_LOCK
    pthread_mutex_unlock(&mem_pool->lock);
#endif

    return ptr;
}
Exemple #15
0
static 
xptr
extend_file_helper(UFile fileHandle,
                   int64_t fileSizeCurrent,
                   int64_t fileSizeNew,
                   xptr freeStackHd,
                   t_layer layerAdjustment,
                   int64_t offsAdjustment,
                   bool initializeData)
{
    /* Does it make sense to initialize every block header? 
       I doubt since when a block is allocated it is never read back from HDD,
       instead header is initialized when block is put to buffer. */ 
    if (initializeData)
    {
        int64_t spanBeginOffs = fileSizeCurrent;
        int64_t spanEndOffs = fileSizeNew;
        int64_t offset;
        void *buf = NULL;
        vmm_sm_blk_hdr *hdr = NULL;
        unsigned int bytesOutCnt = 0;

        /* Allocate aligned buffer and initialize header struct. */ 
        buf = malloc(VMM_SM_BLK_HDR_MAX_SIZE * 2);
        if (!buf) throw std::bad_alloc();
        memset(buf, 0, VMM_SM_BLK_HDR_MAX_SIZE);

        hdr = (vmm_sm_blk_hdr *)ALIGN_PTR(buf, VMM_SM_BLK_HDR_MAX_SIZE);
        vmm_sm_blk_hdr::init(hdr);

        /* Make offsets aligned on block boundary. */ 
        FixSpan(&spanBeginOffs, &spanEndOffs);

        /* Visit every block. */ 
        while (1)
        {
            offset = spanBeginOffs;
            hdr->p = ConsumeNextBlockInSpan(
                    &spanBeginOffs, 
                    &spanEndOffs,
                    layerAdjustment,
                    offsAdjustment,
                    CONSUME_NORMAL);

            /* All done? */ 
            if (hdr->p == XNULL) break;

            /* Seek to offset. */ 
            if (!uSetFilePointer(
                    fileHandle,
                    offset,
                    NULL,
                    U_FILE_BEGIN,
                    __sys_call_error))
            {
                free(buf);
                throw SYSTEM_ENV_EXCEPTION("Cannot set file pointer");
            }

            /* Write header. */ 
            if (!uWriteFile(
                    fileHandle, 
                    hdr, 
                    VMM_SM_BLK_HDR_MAX_SIZE, 
                    &bytesOutCnt,
                    __sys_call_error) || bytesOutCnt!=VMM_SM_BLK_HDR_MAX_SIZE)
            {
                free(buf);
                throw SYSTEM_ENV_EXCEPTION("Cannot write to file");
            }
        }

        /* Dismiss buffer. */ 
        hdr = NULL;
        free(buf); buf = NULL; 
    }

    add_file_span_to_pfb_stack(
        &freeStackHd, 
        fileSizeCurrent, 
        fileSizeNew, 
        layerAdjustment, 
        offsAdjustment);

    return freeStackHd;
}
void* LinearAllocator::start(Page* p)
{
    return ALIGN_PTR(((char*)p) + sizeof(Page));
}
void* LinearAllocator::start(Page* p) {
    return ALIGN_PTR((size_t)p + sizeof(Page));
}
Exemple #18
0
INT CLpd_FAC_Acelp2Mdct(H_MDCT hMdct, FIXP_DBL *output, FIXP_DBL *_pSpec,
                        const SHORT spec_scale[], const int nSpec,
                        FIXP_DBL *pFac, const int fac_scale,
                        const INT fac_length, INT noOutSamples, const INT tl,
                        const FIXP_WTP *wrs, const INT fr, FIXP_LPC A[16],
                        INT A_exp, CAcelpStaticMem *acelp_mem,
                        const FIXP_DBL gain, const int last_frame_lost,
                        const int isFdFac, const UCHAR last_lpd_mode,
                        const int k, int currAliasingSymmetry) {
  FIXP_DBL *pCurr, *pOvl, *pSpec;
  const FIXP_WTP *pWindow;
  const FIXP_WTB *FacWindowZir_conceal;
  UCHAR doFacZirConceal = 0;
  int doDeemph = 1;
  const FIXP_WTB *FacWindowZir, *FacWindowSynth;
  FIXP_DBL *pOut0 = output, *pOut1;
  int w, i, fl, nl, nr, f_len, nrSamples = 0, s = 0, scale, total_gain_e;
  FIXP_DBL *pF, *pFAC_and_FAC_ZIR = NULL;
  FIXP_DBL total_gain = gain;

  FDK_ASSERT(fac_length <= 1024 / (4 * 2));
  switch (fac_length) {
    /* coreCoderFrameLength = 1024 */
    case 128:
      pWindow = SineWindow256;
      FacWindowZir = FacWindowZir128;
      FacWindowSynth = FacWindowSynth128;
      break;
    case 64:
      pWindow = SineWindow128;
      FacWindowZir = FacWindowZir64;
      FacWindowSynth = FacWindowSynth64;
      break;
    case 32:
      pWindow = SineWindow64;
      FacWindowZir = FacWindowZir32;
      FacWindowSynth = FacWindowSynth32;
      break;
    /* coreCoderFrameLength = 768 */
    case 96:
      pWindow = SineWindow192;
      FacWindowZir = FacWindowZir96;
      FacWindowSynth = FacWindowSynth96;
      break;
    case 48:
      pWindow = SineWindow96;
      FacWindowZir = FacWindowZir48;
      FacWindowSynth = FacWindowSynth48;
      break;
    default:
      FDK_ASSERT(0);
      return 0;
  }

  FacWindowZir_conceal = FacWindowSynth;
  /* Derive NR and NL */
  fl = fac_length * 2;
  nl = (tl - fl) >> 1;
  nr = (tl - fr) >> 1;

  if (noOutSamples > nrSamples) {
    /* Purge buffered output. */
    FDKmemcpy(pOut0, hMdct->overlap.time, hMdct->ov_offset * sizeof(pOut0[0]));
    nrSamples = hMdct->ov_offset;
    hMdct->ov_offset = 0;
  }

  if (nrSamples >= noOutSamples) {
    pOut1 = hMdct->overlap.time + hMdct->ov_offset;
    if (hMdct->ov_offset < fac_length) {
      pOut0 = output + nrSamples;
    } else {
      pOut0 = pOut1;
    }
    hMdct->ov_offset += fac_length + nl;
  } else {
    pOut1 = output + nrSamples;
    pOut0 = output + nrSamples;
  }

  {
    pFAC_and_FAC_ZIR = CLpd_ACELP_GetFreeExcMem(acelp_mem, 2 * fac_length);
    {
      const FIXP_DBL *pTmp1, *pTmp2;

      doFacZirConceal |= ((last_frame_lost != 0) && (k == 0));
      doDeemph &= (last_lpd_mode != 4);
      if (doFacZirConceal) {
        /* ACELP contribution in concealment case:
           Use ZIR with a modified ZIR window to preserve some more energy.
           Dont use FAC, which contains wrong information for concealed frame
           Dont use last ACELP samples, but double ZIR, instead (afterwards) */
        FDKmemclear(pFAC_and_FAC_ZIR, 2 * fac_length * sizeof(FIXP_DBL));
        FacWindowSynth = (FIXP_WTB *)pFAC_and_FAC_ZIR;
        FacWindowZir = FacWindowZir_conceal;
      } else {
        CFac_CalcFacSignal(pFAC_and_FAC_ZIR, pFac, fac_scale + s, fac_length, A,
                           A_exp, 1, isFdFac);
      }
      /* 6) Get windowed past ACELP samples and ACELP ZIR signal */

      /*
       * Get ACELP ZIR (pFac[]) and ACELP past samples (pOut0[]) and add them
       * to the FAC synth signal contribution on pOut1[].
       */
      {
        {
          CLpd_Acelp_Zir(A, A_exp, acelp_mem, fac_length, pFac, doDeemph);

          pTmp1 = pOut0;
          pTmp2 = pFac;
        }

        for (i = 0, w = 0; i < fac_length; i++) {
          FIXP_DBL x;
          /* Div2 is compensated by table scaling */
          x = fMultDiv2(pTmp2[i], FacWindowZir[w]);
          x += fMultDiv2(pTmp1[-i - 1], FacWindowSynth[w]);
          x += pFAC_and_FAC_ZIR[i];
          pOut1[i] = x;

          w++;
        }
      }

      if (doFacZirConceal) {
        /* ZIR is the only ACELP contribution, so double it */
        scaleValues(pOut1, fac_length, 1);
      }
    }
  }

  if (nrSamples < noOutSamples) {
    nrSamples += fac_length + nl;
  }

  /* Obtain transform gain */
  total_gain = gain;
  total_gain_e = 0;
  imdct_gain(&total_gain, &total_gain_e, tl);

  /* IMDCT overlap add */
  scale = total_gain_e;
  pSpec = _pSpec;

  /* Note:when comming from an LPD frame (TCX/ACELP) the previous alisaing
   * symmetry must always be 0 */
  if (currAliasingSymmetry == 0) {
    dct_IV(pSpec, tl, &scale);
  } else {
    FIXP_DBL _tmp[1024 + ALIGNMENT_DEFAULT / sizeof(FIXP_DBL)];
    FIXP_DBL *tmp = (FIXP_DBL *)ALIGN_PTR(_tmp);
    C_ALLOC_ALIGNED_REGISTER(tmp, sizeof(_tmp));
    dst_III(pSpec, tmp, tl, &scale);
    C_ALLOC_ALIGNED_UNREGISTER(tmp);
  }

  /* Optional scaling of time domain - no yet windowed - of current spectrum */
  if (total_gain != (FIXP_DBL)0) {
    for (i = 0; i < tl; i++) {
      pSpec[i] = fMult(pSpec[i], total_gain);
    }
  }
  int loc_scale = fixmin_I(spec_scale[0] + scale, (INT)DFRACT_BITS - 1);
  scaleValuesSaturate(pSpec, tl, loc_scale);

  pOut1 += fl / 2 - 1;
  pCurr = pSpec + tl - fl / 2;

  for (i = 0; i < fl / 2; i++) {
    FIXP_DBL x1;

    /* FAC signal is already on pOut1, because of that the += operator. */
    x1 = fMult(*pCurr++, pWindow[i].v.re);
    FDK_ASSERT((pOut1 >= hMdct->overlap.time &&
                pOut1 < hMdct->overlap.time + hMdct->ov_size) ||
               (pOut1 >= output && pOut1 < output + 1024));
    *pOut1 += IMDCT_SCALE_DBL(-x1);
    pOut1--;
  }

  /* NL output samples TL/2+FL/2..TL. - current[FL/2..0] */
  pOut1 += (fl / 2) + 1;

  pFAC_and_FAC_ZIR += fac_length; /* set pointer to beginning of FAC ZIR */

  if (nl == 0) {
    /* save pointer to write FAC ZIR data later */
    hMdct->pFacZir = pFAC_and_FAC_ZIR;
  } else {
    FDK_ASSERT(nl >= fac_length);
    /* FAC ZIR will be added now ... */
    hMdct->pFacZir = NULL;
  }

  pF = pFAC_and_FAC_ZIR;
  f_len = fac_length;

  pCurr = pSpec + tl - fl / 2 - 1;
  for (i = 0; i < nl; i++) {
    FIXP_DBL x = -(*pCurr--);
    /* 5) (item 4) Synthesis filter Zir component, FAC ZIR (another one). */
    if (i < f_len) {
      x += *pF++;
    }

    FDK_ASSERT((pOut1 >= hMdct->overlap.time &&
                pOut1 < hMdct->overlap.time + hMdct->ov_size) ||
               (pOut1 >= output && pOut1 < output + 1024));
    *pOut1 = IMDCT_SCALE_DBL(x);
    pOut1++;
  }

  hMdct->prev_nr = nr;
  hMdct->prev_fr = fr;
  hMdct->prev_wrs = wrs;
  hMdct->prev_tl = tl;
  hMdct->prevPrevAliasSymmetry = hMdct->prevAliasSymmetry;
  hMdct->prevAliasSymmetry = currAliasingSymmetry;
  fl = fr;
  nl = nr;

  pOvl = pSpec + tl / 2 - 1;
  pOut0 = pOut1;

  for (w = 1; w < nSpec; w++) /* for ACELP -> FD short */
  {
    const FIXP_WTP *pWindow_prev;

    /* Setup window pointers */
    pWindow_prev = hMdct->prev_wrs;

    /* Current spectrum */
    pSpec = _pSpec + w * tl;

    scale = total_gain_e;

    /* For the second, third, etc. short frames the alisaing symmetry is equal,
     * either (0,0) or (1,1) */
    if (currAliasingSymmetry == 0) {
      /* DCT IV of current spectrum */
      dct_IV(pSpec, tl, &scale);
    } else {
      dst_IV(pSpec, tl, &scale);
    }

    /* Optional scaling of time domain - no yet windowed - of current spectrum
     */
    /* and de-scale current spectrum signal (time domain, no yet windowed) */
    if (total_gain != (FIXP_DBL)0) {
      for (i = 0; i < tl; i++) {
        pSpec[i] = fMult(pSpec[i], total_gain);
      }
    }
    loc_scale = fixmin_I(spec_scale[w] + scale, (INT)DFRACT_BITS - 1);
    scaleValuesSaturate(pSpec, tl, loc_scale);

    if (noOutSamples <= nrSamples) {
      /* Divert output first half to overlap buffer if we already got enough
       * output samples. */
      pOut0 = hMdct->overlap.time + hMdct->ov_offset;
      hMdct->ov_offset += hMdct->prev_nr + fl / 2;
    } else {
      /* Account output samples */
      nrSamples += hMdct->prev_nr + fl / 2;
    }

    /* NR output samples 0 .. NR. -overlap[TL/2..TL/2-NR] */
    for (i = 0; i < hMdct->prev_nr; i++) {
      FIXP_DBL x = -(*pOvl--);
      *pOut0 = IMDCT_SCALE_DBL(x);
      pOut0++;
    }

    if (noOutSamples <= nrSamples) {
      /* Divert output second half to overlap buffer if we already got enough
       * output samples. */
      pOut1 = hMdct->overlap.time + hMdct->ov_offset + fl / 2 - 1;
      hMdct->ov_offset += fl / 2 + nl;
    } else {
      pOut1 = pOut0 + (fl - 1);
      nrSamples += fl / 2 + nl;
    }

    /* output samples before window crossing point NR .. TL/2.
     * -overlap[TL/2-NR..TL/2-NR-FL/2] + current[NR..TL/2] */
    /* output samples after window crossing point TL/2 .. TL/2+FL/2.
     * -overlap[0..FL/2] - current[TL/2..FL/2] */
    pCurr = pSpec + tl - fl / 2;
    if (currAliasingSymmetry == 0) {
      for (i = 0; i < fl / 2; i++) {
        FIXP_DBL x0, x1;

        cplxMult(&x1, &x0, *pCurr++, -*pOvl--, pWindow_prev[i]);
        *pOut0 = IMDCT_SCALE_DBL(x0);
        *pOut1 = IMDCT_SCALE_DBL(-x1);
        pOut0++;
        pOut1--;
      }
    } else {
      if (hMdct->prevPrevAliasSymmetry == 0) {
        /* Jump DST II -> DST IV for the second window */
        for (i = 0; i < fl / 2; i++) {
          FIXP_DBL x0, x1;

          cplxMult(&x1, &x0, *pCurr++, -*pOvl--, pWindow_prev[i]);
          *pOut0 = IMDCT_SCALE_DBL(x0);
          *pOut1 = IMDCT_SCALE_DBL(x1);
          pOut0++;
          pOut1--;
        }
      } else {
        /* Jump DST IV -> DST IV from the second window on */
        for (i = 0; i < fl / 2; i++) {
          FIXP_DBL x0, x1;

          cplxMult(&x1, &x0, *pCurr++, *pOvl--, pWindow_prev[i]);
          *pOut0 = IMDCT_SCALE_DBL(x0);
          *pOut1 = IMDCT_SCALE_DBL(x1);
          pOut0++;
          pOut1--;
        }
      }
    }

    if (hMdct->pFacZir != 0) {
      /* add FAC ZIR of previous ACELP -> mdct transition */
      FIXP_DBL *pOut = pOut0 - fl / 2;
      FDK_ASSERT(fl / 2 <= 128);
      for (i = 0; i < fl / 2; i++) {
        pOut[i] += IMDCT_SCALE_DBL(hMdct->pFacZir[i]);
      }
      hMdct->pFacZir = NULL;
    }
    pOut0 += (fl / 2);

    /* NL output samples TL/2+FL/2..TL. - current[FL/2..0] */
    pOut1 += (fl / 2) + 1;
    pCurr = pSpec + tl - fl / 2 - 1;
    for (i = 0; i < nl; i++) {
      FIXP_DBL x = -(*pCurr--);
      *pOut1 = IMDCT_SCALE_DBL(x);
      pOut1++;
    }

    /* Set overlap source pointer for next window pOvl = pSpec + tl/2 - 1; */
    pOvl = pSpec + tl / 2 - 1;

    /* Previous window values. */
    hMdct->prev_nr = nr;
    hMdct->prev_fr = fr;
    hMdct->prev_tl = tl;
    hMdct->prev_wrs = pWindow_prev;
    hMdct->prevPrevAliasSymmetry = hMdct->prevAliasSymmetry;
    hMdct->prevAliasSymmetry = currAliasingSymmetry;
  }

  /* Save overlap */

  pOvl = hMdct->overlap.freq + hMdct->ov_size - tl / 2;
  FDK_ASSERT(pOvl >= hMdct->overlap.time + hMdct->ov_offset);
  FDK_ASSERT(tl / 2 <= hMdct->ov_size);
  for (i = 0; i < tl / 2; i++) {
    pOvl[i] = _pSpec[i + (w - 1) * tl];
  }

  return nrSamples;
}
Exemple #19
0
dpa_t *dpa_init(uint32_t hypotheses, uint32_t tracelen)
{
	size_t memsize;
	correl_t *ptr;
	dpa_t *dpa = NULL;
	uint32_t hypo_cnt_fake = hypotheses;

#ifdef SSE
	// must be x*4 hypotheses
	hypo_cnt_fake += 3;
	hypo_cnt_fake &= ~3;
	printf("DPA init - using SSE (%u (+%u fake) hypotheses, tracelen %u)\n",
	       hypotheses, hypo_cnt_fake - hypotheses, tracelen);
#else
	printf("DPA init (%u hypotheses, tracelen %u)\n", hypotheses, tracelen);
#endif

	memsize = (2 * tracelen);	// sum_ysq & mean_y
	memsize += (2 * hypotheses);	// sum_xsq & mean_x
	memsize += hypo_cnt_fake;	// delta_x
	memsize += (1 * hypo_cnt_fake * tracelen);	// sum_cross
	memsize *= sizeof(correl_t);

	memsize += sizeof(dpa_t);

	memsize += ((ALIGN - 1) * 2);	// I don't care if we won't use SSE at all!

	printf("memory usage: %zd MByte\n", memsize / (1024 * 1024));

	assert((dpa = malloc(memsize)));

	dpa->hypo_cnt = hypotheses;
	dpa->hypo_cnt_fake = hypo_cnt_fake;
	dpa->tracelen = tracelen;
	dpa->traces = 0;

	ptr = (correl_t *) (dpa + 1);

	bzero(ptr, hypotheses * sizeof(correl_t));
	dpa->sum_xsq = ptr;
	ptr += hypotheses;

	// initialized with 1st trace
	dpa->mean_x = ptr;
	ptr += hypotheses;

	// align for vector unit
	ALIGN_PTR(ptr);
	// no need to bzero this. 
	dpa->delta_x = ptr;
	ptr += hypo_cnt_fake;

	bzero(ptr, tracelen * sizeof(correl_t));
	dpa->sum_ysq = ptr;
	ptr += tracelen;

	// initialized with 1st trace
	dpa->mean_y = ptr;
	ptr += tracelen;

	// heavy vector stuff ahead!
	ALIGN_PTR(ptr);
	bzero(ptr, hypo_cnt_fake * tracelen * sizeof(correl_t));
	dpa->sum_cross = ptr;

	return dpa;
}
Exemple #20
0
/*********************************************************************
 *		_aligned_offset_realloc (MSVCRT.@)
 */
void * CDECL _aligned_offset_realloc(void *memblock, MSVCRT_size_t size,
                                     MSVCRT_size_t alignment, MSVCRT_size_t offset)
{
    void * temp, **saved;
    MSVCRT_size_t old_padding, new_padding, old_size;
    TRACE("(%p, %lu, %lu, %lu)\n", memblock, size, alignment, offset);

    if (!memblock)
        return _aligned_offset_malloc(size, alignment, offset);

    /* alignment must be a power of 2 */
    if ((alignment & (alignment - 1)) != 0)
    {
        *MSVCRT__errno() = MSVCRT_EINVAL;
        return NULL;
    }

    /* offset must be less than size */
    if (offset >= size)
    {
        *MSVCRT__errno() = MSVCRT_EINVAL;
        return NULL;
    }

    if (size == 0)
    {
        _aligned_free(memblock);
        return NULL;
    }

    /* don't align to less than void pointer size */
    if (alignment < sizeof(void *))
        alignment = sizeof(void *);

    /* make sure alignment and offset didn't change */
    saved = SAVED_PTR(memblock);
    if (memblock != ALIGN_PTR(*saved, alignment, offset))
    {
        *MSVCRT__errno() = MSVCRT_EINVAL;
        return NULL;
    }

    old_padding = (char *)memblock - (char *)*saved;

    /* Get previous size of block */
    old_size = _msize(*saved);
    if (old_size == -1)
    {
        /* It seems this function was called with an invalid pointer. Bail out. */
        return NULL;
    }

    /* Adjust old_size to get amount of actual data in old block. */
    if (old_size < old_padding)
    {
        /* Shouldn't happen. Something's weird, so bail out. */
        return NULL;
    }
    old_size -= old_padding;

    temp = MSVCRT_realloc(*saved, size + alignment + sizeof(void *));

    if (!temp)
        return NULL;

    /* adjust pointer for proper alignment and offset */
    memblock = ALIGN_PTR(temp, alignment, offset);

    /* Save the real allocation address below returned address */
    /* so it can be found later to free. */
    saved = SAVED_PTR(memblock);

    new_padding = (char *)memblock - (char *)temp;

/*
   Memory layout of old block is as follows:
   +-------+---------------------+-+--------------------------+-----------+
   |  ...  | "old_padding" bytes | | ... "old_size" bytes ... |    ...    |
   +-------+---------------------+-+--------------------------+-----------+
           ^                     ^ ^
           |                     | |
        *saved               saved memblock

   Memory layout of new block is as follows:
   +-------+-----------------------------+-+----------------------+-------+
   |  ...  |    "new_padding" bytes      | | ... "size" bytes ... |  ...  |
   +-------+-----------------------------+-+----------------------+-------+
           ^                             ^ ^
           |                             | |
          temp                       saved memblock

   However, in the new block, actual data is still written as follows
   (because it was copied by MSVCRT_realloc):
   +-------+---------------------+--------------------------------+-------+
   |  ...  | "old_padding" bytes |   ... "old_size" bytes ...     |  ...  |
   +-------+---------------------+--------------------------------+-------+
           ^                             ^ ^
           |                             | |
          temp                       saved memblock

   Therefore, min(old_size,size) bytes of actual data have to be moved
   from the offset they were at in the old block (temp + old_padding),
   to the offset they have to be in the new block (temp + new_padding == memblock).
*/
    if (new_padding != old_padding)
        memmove((char *)memblock, (char *)temp + old_padding, (old_size < size) ? old_size : size);

    *saved = temp;

    return memblock;
}