ACPI_STATUS
AcpiPsParseLoop (
ACPI_WALK_STATE *WalkState)
{
ACPI_STATUS Status = AE_OK;
ACPI_PARSE_OBJECT *Op = NULL; /* current op */
ACPI_PARSE_STATE *ParserState;
UINT8 *AmlOpStart = NULL;
ACPI_FUNCTION_TRACE_PTR (PsParseLoop, WalkState);
if (WalkState->DescendingCallback == NULL)
{
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
ParserState = &WalkState->ParserState;
WalkState->ArgTypes = 0;
#if (!defined (ACPI_NO_METHOD_EXECUTION) && !defined (ACPI_CONSTANT_EVAL_ONLY))
if (WalkState->WalkType & ACPI_WALK_METHOD_RESTART)
{
/* We are restarting a preempted control method */
if (AcpiPsHasCompletedScope (ParserState))
{
/*
* We must check if a predicate to an IF or WHILE statement
* was just completed
*/
if ((ParserState->Scope->ParseScope.Op) &&
((ParserState->Scope->ParseScope.Op->Common.AmlOpcode == AML_IF_OP) ||
(ParserState->Scope->ParseScope.Op->Common.AmlOpcode == AML_WHILE_OP)) &&
(WalkState->ControlState) &&
(WalkState->ControlState->Common.State ==
ACPI_CONTROL_PREDICATE_EXECUTING))
{
/*
* A predicate was just completed, get the value of the
* predicate and branch based on that value
*/
WalkState->Op = NULL;
Status = AcpiDsGetPredicateValue (WalkState, ACPI_TO_POINTER (TRUE));
if (ACPI_FAILURE (Status) &&
((Status & AE_CODE_MASK) != AE_CODE_CONTROL))
{
if (Status == AE_AML_NO_RETURN_VALUE)
{
ACPI_EXCEPTION ((AE_INFO, Status,
"Invoked method did not return a value"));
}
ACPI_EXCEPTION ((AE_INFO, Status, "GetPredicate Failed"));
return_ACPI_STATUS (Status);
}
Status = AcpiPsNextParseState (WalkState, Op, Status);
}
AcpiPsPopScope (ParserState, &Op,
&WalkState->ArgTypes, &WalkState->ArgCount);
ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "Popped scope, Op=%p\n", Op));
}
else if (WalkState->PrevOp)
{
/* We were in the middle of an op */
Op = WalkState->PrevOp;
WalkState->ArgTypes = WalkState->PrevArgTypes;
}
}
#endif
/* Iterative parsing loop, while there is more AML to process: */
while ((ParserState->Aml < ParserState->AmlEnd) || (Op))
{
AmlOpStart = ParserState->Aml;
if (!Op)
{
Status = AcpiPsCreateOp (WalkState, AmlOpStart, &Op);
if (ACPI_FAILURE (Status))
{
if (Status == AE_CTRL_PARSE_CONTINUE)
{
continue;
}
if (Status == AE_CTRL_PARSE_PENDING)
{
Status = AE_OK;
}
Status = AcpiPsCompleteOp (WalkState, &Op, Status);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
continue;
}
Op->Common.AmlOffset = WalkState->AmlOffset;
if (WalkState->OpInfo)
{
ACPI_DEBUG_PRINT ((ACPI_DB_PARSE,
"Opcode %4.4X [%s] Op %p Aml %p AmlOffset %5.5X\n",
(UINT32) Op->Common.AmlOpcode, WalkState->OpInfo->Name,
Op, ParserState->Aml, Op->Common.AmlOffset));
}
}
/*
* Start ArgCount at zero because we don't know if there are
* any args yet
*/
WalkState->ArgCount = 0;
/* Are there any arguments that must be processed? */
if (WalkState->ArgTypes)
{
/* Get arguments */
Status = AcpiPsGetArguments (WalkState, AmlOpStart, Op);
if (ACPI_FAILURE (Status))
{
Status = AcpiPsCompleteOp (WalkState, &Op, Status);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
continue;
}
}
/* Check for arguments that need to be processed */
if (WalkState->ArgCount)
{
/*
* There are arguments (complex ones), push Op and
* prepare for argument
*/
Status = AcpiPsPushScope (ParserState, Op,
WalkState->ArgTypes, WalkState->ArgCount);
if (ACPI_FAILURE (Status))
{
Status = AcpiPsCompleteOp (WalkState, &Op, Status);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
continue;
}
Op = NULL;
continue;
}
/*
* All arguments have been processed -- Op is complete,
* prepare for next
*/
WalkState->OpInfo = AcpiPsGetOpcodeInfo (Op->Common.AmlOpcode);
if (WalkState->OpInfo->Flags & AML_NAMED)
{
if (AcpiGbl_Depth)
{
AcpiGbl_Depth--;
}
if (Op->Common.AmlOpcode == AML_REGION_OP ||
Op->Common.AmlOpcode == AML_DATA_REGION_OP)
{
/*
* Skip parsing of control method or opregion body,
* because we don't have enough info in the first pass
* to parse them correctly.
*
* Completed parsing an OpRegion declaration, we now
* know the length.
*/
Op->Named.Length = (UINT32) (ParserState->Aml - Op->Named.Data);
}
}
if (WalkState->OpInfo->Flags & AML_CREATE)
{
/*
* Backup to beginning of CreateXXXfield declaration (1 for
* Opcode)
*
* BodyLength is unknown until we parse the body
*/
Op->Named.Length = (UINT32) (ParserState->Aml - Op->Named.Data);
}
if (Op->Common.AmlOpcode == AML_BANK_FIELD_OP)
{
/*
* Backup to beginning of BankField declaration
*
* BodyLength is unknown until we parse the body
*/
Op->Named.Length = (UINT32) (ParserState->Aml - Op->Named.Data);
}
/* This op complete, notify the dispatcher */
if (WalkState->AscendingCallback != NULL)
{
WalkState->Op = Op;
WalkState->Opcode = Op->Common.AmlOpcode;
Status = WalkState->AscendingCallback (WalkState);
Status = AcpiPsNextParseState (WalkState, Op, Status);
if (Status == AE_CTRL_PENDING)
{
Status = AE_OK;
}
}
Status = AcpiPsCompleteOp (WalkState, &Op, Status);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
} /* while ParserState->Aml */
Status = AcpiPsCompleteFinalOp (WalkState, Op, Status);
return_ACPI_STATUS (Status);
}
ACPI_STATUS
AcpiPsParseLoop (
ACPI_WALK_STATE *WalkState)
{
ACPI_STATUS Status = AE_OK;
ACPI_PARSE_OBJECT *Op = NULL; /* current op */
ACPI_PARSE_STATE *ParserState;
UINT8 *AmlOpStart = NULL;
ACPI_FUNCTION_TRACE_PTR (PsParseLoop, WalkState);
if (WalkState->DescendingCallback == NULL)
{
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
ParserState = &WalkState->ParserState;
WalkState->ArgTypes = 0;
#if (!defined (ACPI_NO_METHOD_EXECUTION) && !defined (ACPI_CONSTANT_EVAL_ONLY))
if (WalkState->WalkType & ACPI_WALK_METHOD_RESTART)
{
/* We are restarting a preempted control method */
if (AcpiPsHasCompletedScope (ParserState))
{
/*
* We must check if a predicate to an IF or WHILE statement
* was just completed
*/
if ((ParserState->Scope->ParseScope.Op) &&
((ParserState->Scope->ParseScope.Op->Common.AmlOpcode == AML_IF_OP) ||
(ParserState->Scope->ParseScope.Op->Common.AmlOpcode == AML_WHILE_OP)) &&
(WalkState->ControlState) &&
(WalkState->ControlState->Common.State ==
ACPI_CONTROL_PREDICATE_EXECUTING))
{
/*
* A predicate was just completed, get the value of the
* predicate and branch based on that value
*/
WalkState->Op = NULL;
Status = AcpiDsGetPredicateValue (WalkState, ACPI_TO_POINTER (TRUE));
if (ACPI_FAILURE (Status) &&
((Status & AE_CODE_MASK) != AE_CODE_CONTROL))
{
if (Status == AE_AML_NO_RETURN_VALUE)
{
ACPI_EXCEPTION ((AE_INFO, Status,
"Invoked method did not return a value"));
}
ACPI_EXCEPTION ((AE_INFO, Status, "GetPredicate Failed"));
return_ACPI_STATUS (Status);
}
Status = AcpiPsNextParseState (WalkState, Op, Status);
}
AcpiPsPopScope (ParserState, &Op,
&WalkState->ArgTypes, &WalkState->ArgCount);
ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "Popped scope, Op=%p\n", Op));
}
else if (WalkState->PrevOp)
{
/* We were in the middle of an op */
Op = WalkState->PrevOp;
WalkState->ArgTypes = WalkState->PrevArgTypes;
}
}
#endif
/* Iterative parsing loop, while there is more AML to process: */
while ((ParserState->Aml < ParserState->AmlEnd) || (Op))
{
ASL_CV_CAPTURE_COMMENTS (WalkState);
AmlOpStart = ParserState->Aml;
if (!Op)
{
Status = AcpiPsCreateOp (WalkState, AmlOpStart, &Op);
if (ACPI_FAILURE (Status))
{
/*
* ACPI_PARSE_MODULE_LEVEL means that we are loading a table by
* executing it as a control method. However, if we encounter
* an error while loading the table, we need to keep trying to
* load the table rather than aborting the table load. Set the
* status to AE_OK to proceed with the table load.
*/
if ((WalkState->ParseFlags & ACPI_PARSE_MODULE_LEVEL) &&
Status == AE_ALREADY_EXISTS)
{
Status = AE_OK;
}
if (Status == AE_CTRL_PARSE_CONTINUE)
{
continue;
}
if (Status == AE_CTRL_PARSE_PENDING)
{
Status = AE_OK;
}
if (Status == AE_CTRL_TERMINATE)
{
return_ACPI_STATUS (Status);
}
Status = AcpiPsCompleteOp (WalkState, &Op, Status);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
if (AcpiNsOpensScope (
AcpiPsGetOpcodeInfo (WalkState->Opcode)->ObjectType))
{
/*
* If the scope/device op fails to parse, skip the body of
* the scope op because the parse failure indicates that
* the device may not exist.
*/
ACPI_ERROR ((AE_INFO, "Skip parsing opcode %s",
AcpiPsGetOpcodeName (WalkState->Opcode)));
WalkState->ParserState.Aml = WalkState->Aml + 1;
WalkState->ParserState.Aml =
AcpiPsGetNextPackageEnd(&WalkState->ParserState);
WalkState->Aml = WalkState->ParserState.Aml;
}
continue;
}
AcpiExStartTraceOpcode (Op, WalkState);
}
/*
* Start ArgCount at zero because we don't know if there are
* any args yet
*/
WalkState->ArgCount = 0;
switch (Op->Common.AmlOpcode)
{
case AML_BYTE_OP:
case AML_WORD_OP:
case AML_DWORD_OP:
case AML_QWORD_OP:
break;
default:
ASL_CV_CAPTURE_COMMENTS (WalkState);
break;
}
/* Are there any arguments that must be processed? */
if (WalkState->ArgTypes)
{
/* Get arguments */
Status = AcpiPsGetArguments (WalkState, AmlOpStart, Op);
if (ACPI_FAILURE (Status))
{
Status = AcpiPsCompleteOp (WalkState, &Op, Status);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
if ((WalkState->ControlState) &&
((WalkState->ControlState->Control.Opcode == AML_IF_OP) ||
(WalkState->ControlState->Control.Opcode == AML_WHILE_OP)))
{
/*
* If the if/while op fails to parse, we will skip parsing
* the body of the op.
*/
ParserState->Aml =
WalkState->ControlState->Control.AmlPredicateStart + 1;
ParserState->Aml =
AcpiPsGetNextPackageEnd (ParserState);
WalkState->Aml = ParserState->Aml;
ACPI_ERROR ((AE_INFO, "Skipping While/If block"));
if (*WalkState->Aml == AML_ELSE_OP)
{
ACPI_ERROR ((AE_INFO, "Skipping Else block"));
WalkState->ParserState.Aml = WalkState->Aml + 1;
WalkState->ParserState.Aml =
AcpiPsGetNextPackageEnd (ParserState);
WalkState->Aml = ParserState->Aml;
}
ACPI_FREE(AcpiUtPopGenericState (&WalkState->ControlState));
}
Op = NULL;
continue;
}
}
/* Check for arguments that need to be processed */
ACPI_DEBUG_PRINT ((ACPI_DB_PARSE,
"Parseloop: argument count: %8.8X\n", WalkState->ArgCount));
if (WalkState->ArgCount)
{
/*
* There are arguments (complex ones), push Op and
* prepare for argument
*/
Status = AcpiPsPushScope (ParserState, Op,
WalkState->ArgTypes, WalkState->ArgCount);
if (ACPI_FAILURE (Status))
{
Status = AcpiPsCompleteOp (WalkState, &Op, Status);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
continue;
}
Op = NULL;
continue;
}
/*
* All arguments have been processed -- Op is complete,
* prepare for next
*/
WalkState->OpInfo = AcpiPsGetOpcodeInfo (Op->Common.AmlOpcode);
if (WalkState->OpInfo->Flags & AML_NAMED)
{
if (Op->Common.AmlOpcode == AML_REGION_OP ||
Op->Common.AmlOpcode == AML_DATA_REGION_OP)
{
/*
* Skip parsing of control method or opregion body,
* because we don't have enough info in the first pass
* to parse them correctly.
*
* Completed parsing an OpRegion declaration, we now
* know the length.
*/
Op->Named.Length = (UINT32) (ParserState->Aml - Op->Named.Data);
}
}
if (WalkState->OpInfo->Flags & AML_CREATE)
{
/*
* Backup to beginning of CreateXXXfield declaration (1 for
* Opcode)
*
* BodyLength is unknown until we parse the body
*/
Op->Named.Length = (UINT32) (ParserState->Aml - Op->Named.Data);
}
if (Op->Common.AmlOpcode == AML_BANK_FIELD_OP)
{
/*
* Backup to beginning of BankField declaration
*
* BodyLength is unknown until we parse the body
*/
Op->Named.Length = (UINT32) (ParserState->Aml - Op->Named.Data);
}
/* This op complete, notify the dispatcher */
if (WalkState->AscendingCallback != NULL)
{
WalkState->Op = Op;
WalkState->Opcode = Op->Common.AmlOpcode;
Status = WalkState->AscendingCallback (WalkState);
Status = AcpiPsNextParseState (WalkState, Op, Status);
if (Status == AE_CTRL_PENDING)
{
Status = AE_OK;
}
else if ((WalkState->ParseFlags & ACPI_PARSE_MODULE_LEVEL) &&
(ACPI_AML_EXCEPTION(Status) || Status == AE_ALREADY_EXISTS ||
Status == AE_NOT_FOUND))
{
/*
* ACPI_PARSE_MODULE_LEVEL flag means that we are currently
* loading a table by executing it as a control method.
* However, if we encounter an error while loading the table,
* we need to keep trying to load the table rather than
* aborting the table load (setting the status to AE_OK
* continues the table load). If we get a failure at this
* point, it means that the dispatcher got an error while
* trying to execute the Op.
*/
Status = AE_OK;
}
}
Status = AcpiPsCompleteOp (WalkState, &Op, Status);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
} /* while ParserState->Aml */
Status = AcpiPsCompleteFinalOp (WalkState, Op, Status);
return_ACPI_STATUS (Status);
}
