int ACPI_SYSTEM_XFACE
main (
int argc,
char **argv)
{
ACPI_STATUS Status;
UINT32 InitFlags;
ACPI_TABLE_HEADER *Table = NULL;
UINT32 TableCount;
AE_TABLE_DESC *TableDesc;
ACPI_DEBUG_INITIALIZE (); /* For debug version only */
signal (SIGINT, AeCtrlCHandler);
/* Init debug globals */
AcpiDbgLevel = ACPI_NORMAL_DEFAULT;
AcpiDbgLayer = 0xFFFFFFFF;
/* Init ACPICA and start debugger thread */
Status = AcpiInitializeSubsystem ();
AE_CHECK_OK (AcpiInitializeSubsystem, Status);
if (ACPI_FAILURE (Status))
{
goto ErrorExit;
}
printf (ACPI_COMMON_SIGNON (ACPIEXEC_NAME));
if (argc < 2)
{
usage ();
(void) AcpiOsTerminate ();
return (0);
}
/* Get the command line options */
if (AeDoOptions (argc, argv))
{
goto ErrorExit;
}
/* The remaining arguments are filenames for ACPI tables */
if (!argv[AcpiGbl_Optind])
{
goto EnterDebugger;
}
AcpiGbl_DbOpt_tables = TRUE;
AcpiGbl_CstyleDisassembly = FALSE; /* Not supported for AcpiExec */
TableCount = 0;
/* Get each of the ACPI table files on the command line */
while (argv[AcpiGbl_Optind])
{
/* Get one entire table */
Status = AcpiUtReadTableFromFile (argv[AcpiGbl_Optind], &Table);
if (ACPI_FAILURE (Status))
{
printf ("**** Could not get table from file %s, %s\n",
argv[AcpiGbl_Optind], AcpiFormatException (Status));
goto ErrorExit;
}
/* Ignore non-AML tables, we can't use them. Except for an FADT */
if (!ACPI_COMPARE_NAME (Table->Signature, ACPI_SIG_FADT) &&
!AcpiUtIsAmlTable (Table))
{
ACPI_INFO ((AE_INFO,
"Table [%4.4s] is not an AML table, ignoring",
Table->Signature));
AcpiOsFree (Table);
}
else
{
/* Allocate and link a table descriptor */
TableDesc = AcpiOsAllocate (sizeof (AE_TABLE_DESC));
TableDesc->Table = Table;
TableDesc->Next = AeTableListHead;
AeTableListHead = TableDesc;
TableCount++;
}
AcpiGbl_Optind++;
}
printf ("\n");
/* Build a local RSDT with all tables and let ACPICA process the RSDT */
Status = AeBuildLocalTables (TableCount, AeTableListHead);
if (ACPI_FAILURE (Status))
{
goto ErrorExit;
}
Status = AeInstallTables ();
if (ACPI_FAILURE (Status))
{
printf ("**** Could not load ACPI tables, %s\n",
AcpiFormatException (Status));
goto EnterDebugger;
}
/*
* Install most of the handlers.
* Override some default region handlers, especially SystemMemory
*/
Status = AeInstallEarlyHandlers ();
if (ACPI_FAILURE (Status))
{
goto EnterDebugger;
}
/* Setup initialization flags for ACPICA */
InitFlags = (ACPI_NO_HANDLER_INIT | ACPI_NO_ACPI_ENABLE);
if (!AcpiGbl_DbOpt_ini_methods)
{
InitFlags |= (ACPI_NO_DEVICE_INIT | ACPI_NO_OBJECT_INIT);
}
/*
* Main initialization for ACPICA subsystem
* TBD: Need a way to call this after the ACPI table "LOAD" command
*/
Status = AcpiEnableSubsystem (InitFlags);
if (ACPI_FAILURE (Status))
{
printf ("**** Could not EnableSubsystem, %s\n",
AcpiFormatException (Status));
goto EnterDebugger;
}
/*
* Install handlers for "device driver" space IDs (EC,SMBus, etc.)
* and fixed event handlers
*/
AeInstallLateHandlers ();
/* Finish the ACPICA initialization */
Status = AcpiInitializeObjects (InitFlags);
if (ACPI_FAILURE (Status))
{
printf ("**** Could not InitializeObjects, %s\n",
AcpiFormatException (Status));
goto EnterDebugger;
}
AeMiscellaneousTests ();
EnterDebugger:
/* Exit if error above and we are in one of the batch modes */
if (ACPI_FAILURE (Status) && (AcpiGbl_ExecutionMode > 0))
{
goto ErrorExit;
}
/* Run a batch command or enter the command loop */
switch (AcpiGbl_ExecutionMode)
{
default:
case AE_MODE_COMMAND_LOOP:
AcpiDbUserCommands (ACPI_DEBUGGER_COMMAND_PROMPT, NULL);
break;
case AE_MODE_BATCH_MULTIPLE:
AcpiDbRunBatchMode ();
break;
case AE_MODE_BATCH_SINGLE:
AcpiDbExecute (BatchBuffer, NULL, NULL, EX_NO_SINGLE_STEP);
Status = AcpiTerminate ();
break;
}
return (0);
ErrorExit:
(void) AcpiOsTerminate ();
return (-1);
}
static int
NsDumpEntireNamespace (
char *AmlFilename)
{
ACPI_STATUS Status;
ACPI_TABLE_HEADER *Table = NULL;
UINT32 TableCount = 0;
AE_TABLE_DESC *TableDesc;
ACPI_HANDLE Handle;
/* Open the binary AML file and read the entire table */
Status = AcpiUtReadTableFromFile (AmlFilename, &Table);
if (ACPI_FAILURE (Status))
{
printf ("**** Could not get input table %s, %s\n", AmlFilename,
AcpiFormatException (Status));
return (-1);
}
/* Table must be a DSDT. SSDTs are not currently supported */
if (!ACPI_COMPARE_NAME (Table->Signature, ACPI_SIG_DSDT))
{
printf ("**** Input table signature is [%4.4s], must be [DSDT]\n",
Table->Signature);
return (-1);
}
/*
* Allocate and link a table descriptor (allows for future expansion to
* multiple input files)
*/
TableDesc = AcpiOsAllocate (sizeof (AE_TABLE_DESC));
TableDesc->Table = Table;
TableDesc->Next = AeTableListHead;
AeTableListHead = TableDesc;
TableCount++;
/*
* Build a local XSDT with all tables. Normally, here is where the
* RSDP search is performed to find the ACPI tables
*/
Status = AeBuildLocalTables (TableCount, AeTableListHead);
if (ACPI_FAILURE (Status))
{
return (-1);
}
/* Initialize table manager, get XSDT */
Status = AcpiInitializeTables (Tables, ACPI_MAX_INIT_TABLES, TRUE);
if (ACPI_FAILURE (Status))
{
printf ("**** Could not initialize ACPI table manager, %s\n",
AcpiFormatException (Status));
return (-1);
}
/* Reallocate root table to dynamic memory */
Status = AcpiReallocateRootTable ();
if (ACPI_FAILURE (Status))
{
printf ("**** Could not reallocate root table, %s\n",
AcpiFormatException (Status));
return (-1);
}
/* Load the ACPI namespace */
Status = AcpiLoadTables ();
if (ACPI_FAILURE (Status))
{
printf ("**** Could not load ACPI tables, %s\n",
AcpiFormatException (Status));
return (-1);
}
/*
* Enable ACPICA. These calls don't do much for this
* utility, since we only dump the namespace. There is no
* hardware or event manager code underneath.
*/
Status = AcpiEnableSubsystem (
ACPI_NO_ACPI_ENABLE |
ACPI_NO_ADDRESS_SPACE_INIT |
ACPI_NO_EVENT_INIT |
ACPI_NO_HANDLER_INIT);
if (ACPI_FAILURE (Status))
{
printf ("**** Could not EnableSubsystem, %s\n",
AcpiFormatException (Status));
return (-1);
}
Status = AcpiInitializeObjects (
ACPI_NO_ADDRESS_SPACE_INIT |
ACPI_NO_DEVICE_INIT |
ACPI_NO_EVENT_INIT);
if (ACPI_FAILURE (Status))
{
printf ("**** Could not InitializeObjects, %s\n",
AcpiFormatException (Status));
return (-1);
}
/*
* Perform a namespace walk to dump the contents
*/
AcpiOsPrintf ("\nACPI Namespace:\n");
AcpiNsDumpObjects (ACPI_TYPE_ANY, ACPI_DISPLAY_SUMMARY, ACPI_UINT32_MAX,
ACPI_OWNER_ID_MAX, AcpiGbl_RootNode);
/* Example: get a handle to the _GPE scope */
Status = AcpiGetHandle (NULL, "\\_GPE", &Handle);
AE_CHECK_OK (AcpiGetHandle, Status);
return (0);
}
int ACPI_SYSTEM_XFACE
main (
int argc,
char **argv)
{
ACPI_STATUS Status;
UINT32 InitFlags;
ACPI_TABLE_HEADER *Table = NULL;
UINT32 TableCount;
AE_TABLE_DESC *TableDesc;
char **WildcardList;
char *Filename;
char *Directory;
char *FullPathname;
#ifdef _DEBUG
_CrtSetDbgFlag (_CRTDBG_CHECK_ALWAYS_DF | _CRTDBG_LEAK_CHECK_DF |
_CrtSetDbgFlag(_CRTDBG_REPORT_FLAG));
#endif
printf (ACPI_COMMON_SIGNON ("AML Execution/Debug Utility"));
if (argc < 2)
{
usage ();
return (0);
}
signal (SIGINT, AeCtrlCHandler);
/* Init globals */
AcpiDbgLevel = ACPI_NORMAL_DEFAULT;
AcpiDbgLayer = 0xFFFFFFFF;
/* Init ACPI and start debugger thread */
Status = AcpiInitializeSubsystem ();
AE_CHECK_OK (AcpiInitializeSubsystem, Status);
if (ACPI_FAILURE (Status))
{
return (-1);
}
/* Get the command line options */
if (AeDoOptions (argc, argv))
{
return (-1);
}
/* The remaining arguments are filenames for ACPI tables */
if (argv[AcpiGbl_Optind])
{
AcpiGbl_DbOpt_tables = TRUE;
TableCount = 0;
/* Get each of the ACPI table files on the command line */
while (argv[AcpiGbl_Optind])
{
/* Split incoming path into a directory/filename combo */
Status = FlSplitInputPathname (argv[AcpiGbl_Optind],
&Directory, &Filename);
if (ACPI_FAILURE (Status))
{
return (-1);
}
/* Expand wildcards (Windows only) */
WildcardList = AsDoWildcard (Directory, Filename);
if (!WildcardList)
{
return (-1);
}
while (*WildcardList)
{
FullPathname = AcpiOsAllocate (
strlen (Directory) + strlen (*WildcardList) + 1);
/* Construct a full path to the file */
strcpy (FullPathname, Directory);
strcat (FullPathname, *WildcardList);
/* Get one table */
Status = AcpiDbReadTableFromFile (FullPathname, &Table);
if (ACPI_FAILURE (Status))
{
printf ("**** Could not get input table %s, %s\n",
FullPathname, AcpiFormatException (Status));
goto EnterDebugger;
}
AcpiOsFree (FullPathname);
AcpiOsFree (*WildcardList);
*WildcardList = NULL;
WildcardList++;
/* Ignore non-AML tables, we can't use them. Except for an FADT */
if (!ACPI_COMPARE_NAME (Table->Signature, ACPI_SIG_FADT) &&
!AcpiUtIsAmlTable (Table))
{
ACPI_WARNING ((AE_INFO,
"Table %4.4s is not an AML table, ignoring",
Table->Signature));
AcpiOsFree (Table);
continue;
}
/* Allocate and link a table descriptor */
TableDesc = AcpiOsAllocate (sizeof (AE_TABLE_DESC));
TableDesc->Table = Table;
TableDesc->Next = AeTableListHead;
AeTableListHead = TableDesc;
TableCount++;
}
AcpiGbl_Optind++;
}
/* Build a local RSDT with all tables and let ACPICA process the RSDT */
Status = AeBuildLocalTables (TableCount, AeTableListHead);
if (ACPI_FAILURE (Status))
{
return (-1);
}
Status = AeInstallTables ();
if (ACPI_FAILURE (Status))
{
printf ("**** Could not load ACPI tables, %s\n",
AcpiFormatException (Status));
goto EnterDebugger;
}
/*
* Install most of the handlers.
* Override some default region handlers, especially SystemMemory
*/
Status = AeInstallEarlyHandlers ();
if (ACPI_FAILURE (Status))
{
goto EnterDebugger;
}
/* Setup initialization flags for ACPICA */
InitFlags = (ACPI_NO_HANDLER_INIT | ACPI_NO_ACPI_ENABLE);
if (!AcpiGbl_DbOpt_ini_methods)
{
InitFlags |= (ACPI_NO_DEVICE_INIT | ACPI_NO_OBJECT_INIT);
}
/*
* Main initialization for ACPICA subsystem
* TBD: Need a way to call this after the ACPI table "LOAD" command
*/
Status = AcpiEnableSubsystem (InitFlags);
if (ACPI_FAILURE (Status))
{
printf ("**** Could not EnableSubsystem, %s\n",
AcpiFormatException (Status));
goto EnterDebugger;
}
Status = AcpiInitializeObjects (InitFlags);
if (ACPI_FAILURE (Status))
{
printf ("**** Could not InitializeObjects, %s\n",
AcpiFormatException (Status));
goto EnterDebugger;
}
/*
* Install handlers for "device driver" space IDs (EC,SMBus, etc.)
* and fixed event handlers
*/
AeInstallLateHandlers ();
AeMiscellaneousTests ();
}
EnterDebugger:
/* Exit if error above and we are in one of the batch modes */
if (ACPI_FAILURE (Status) && (AcpiGbl_ExecutionMode > 0))
{
return (-1);
}
/* Run a batch command or enter the command loop */
switch (AcpiGbl_ExecutionMode)
{
default:
case AE_MODE_COMMAND_LOOP:
AcpiDbUserCommands (ACPI_DEBUGGER_COMMAND_PROMPT, NULL);
break;
case AE_MODE_BATCH_MULTIPLE:
AcpiDbRunBatchMode ();
break;
case AE_MODE_BATCH_SINGLE:
AcpiDbExecute (BatchBuffer, NULL, NULL, EX_NO_SINGLE_STEP);
break;
}
return (0);
}
int ACPI_SYSTEM_XFACE
main (
int argc,
char **argv)
{
int j;
ACPI_STATUS Status;
UINT32 InitFlags;
ACPI_TABLE_HEADER *Table = NULL;
UINT32 TableCount;
AE_TABLE_DESC *TableDesc;
char **WildcardList;
char *Filename;
char *Directory;
char *FullPathname;
#ifdef _DEBUG
_CrtSetDbgFlag (_CRTDBG_CHECK_ALWAYS_DF | _CRTDBG_LEAK_CHECK_DF |
_CrtSetDbgFlag(_CRTDBG_REPORT_FLAG));
#endif
printf (ACPI_COMMON_SIGNON ("AML Execution/Debug Utility"));
if (argc < 2)
{
usage ();
return (0);
}
signal (SIGINT, AeCtrlCHandler);
/* Init globals */
AcpiDbgLevel = ACPI_NORMAL_DEFAULT;
AcpiDbgLayer = 0xFFFFFFFF;
/* Init ACPI and start debugger thread */
Status = AcpiInitializeSubsystem ();
AE_CHECK_OK (AcpiInitializeSubsystem, Status);
/* Get the command line options */
while ((j = AcpiGetopt (argc, argv, AE_SUPPORTED_OPTIONS)) != EOF) switch(j)
{
case 'b':
if (strlen (AcpiGbl_Optarg) > 127)
{
printf ("**** The length of command line (%u) exceeded maximum (127)\n",
(UINT32) strlen (AcpiGbl_Optarg));
return (-1);
}
AcpiGbl_BatchMode = 1;
strcpy (BatchBuffer, AcpiGbl_Optarg);
break;
case 'd':
switch (AcpiGbl_Optarg[0])
{
case 'a':
AcpiGbl_IgnoreErrors = TRUE;
break;
case 'i':
AcpiGbl_DbOpt_ini_methods = FALSE;
break;
case 'o':
AcpiGbl_DbOpt_NoRegionSupport = TRUE;
break;
case 'r':
AcpiGbl_DisableAutoRepair = TRUE;
break;
case 't':
#ifdef ACPI_DBG_TRACK_ALLOCATIONS
AcpiGbl_DisableMemTracking = TRUE;
#endif
break;
default:
printf ("Unknown option: -d%s\n", AcpiGbl_Optarg);
return (-1);
}
break;
case 'e':
switch (AcpiGbl_Optarg[0])
{
case 'f':
#ifdef ACPI_DBG_TRACK_ALLOCATIONS
AcpiGbl_DisplayFinalMemStats = TRUE;
#endif
break;
case 'm':
AcpiGbl_AllMethodsSerialized = TRUE;
printf ("Enabling AML Interpreter serialized mode\n");
break;
case 's':
AcpiGbl_EnableInterpreterSlack = TRUE;
printf ("Enabling AML Interpreter slack mode\n");
break;
case 't':
AcpiGbl_DebugTimeout = TRUE;
break;
default:
printf ("Unknown option: -e%s\n", AcpiGbl_Optarg);
return (-1);
}
break;
case 'f':
AcpiGbl_RegionFillValue = (UINT8) strtoul (AcpiGbl_Optarg, NULL, 0);
break;
case 'g':
AcpiGbl_DbOpt_tables = TRUE;
AcpiGbl_DbFilename = NULL;
break;
case 'm':
AcpiGbl_BatchMode = 2;
switch (AcpiGbl_Optarg[0])
{
case '^':
strcpy (BatchBuffer, "MAIN");
break;
default:
strcpy (BatchBuffer, AcpiGbl_Optarg);
break;
}
break;
case 'o':
AcpiGbl_DbOpt_disasm = TRUE;
AcpiGbl_DbOpt_stats = TRUE;
break;
case 'v':
AcpiDbgLevel |= ACPI_LV_INIT_NAMES;
break;
case 'x':
AcpiDbgLevel = strtoul (AcpiGbl_Optarg, NULL, 0);
AcpiGbl_DbConsoleDebugLevel = AcpiDbgLevel;
printf ("Debug Level: 0x%8.8X\n", AcpiDbgLevel);
break;
case '?':
case 'h':
default:
usage();
return (-1);
}
InitFlags = (ACPI_NO_HANDLER_INIT | ACPI_NO_ACPI_ENABLE);
if (!AcpiGbl_DbOpt_ini_methods)
{
InitFlags |= (ACPI_NO_DEVICE_INIT | ACPI_NO_OBJECT_INIT);
}
/* The remaining arguments are filenames for ACPI tables */
if (argv[AcpiGbl_Optind])
{
AcpiGbl_DbOpt_tables = TRUE;
TableCount = 0;
/* Get each of the ACPI table files on the command line */
while (argv[AcpiGbl_Optind])
{
/* Split incoming path into a directory/filename combo */
Status = FlSplitInputPathname (argv[AcpiGbl_Optind], &Directory, &Filename);
if (ACPI_FAILURE (Status))
{
return (Status);
}
/* Expand wildcards (Windows only) */
WildcardList = AsDoWildcard (Directory, Filename);
if (!WildcardList)
{
return (-1);
}
while (*WildcardList)
{
FullPathname = AcpiOsAllocate (
strlen (Directory) + strlen (*WildcardList) + 1);
/* Construct a full path to the file */
strcpy (FullPathname, Directory);
strcat (FullPathname, *WildcardList);
/* Get one table */
Status = AcpiDbReadTableFromFile (FullPathname, &Table);
if (ACPI_FAILURE (Status))
{
printf ("**** Could not get input table %s, %s\n", FullPathname,
AcpiFormatException (Status));
goto enterloop;
}
AcpiOsFree (FullPathname);
AcpiOsFree (*WildcardList);
*WildcardList = NULL;
WildcardList++;
/*
* Ignore an FACS or RSDT, we can't use them.
*/
if (ACPI_COMPARE_NAME (Table->Signature, ACPI_SIG_FACS) ||
ACPI_COMPARE_NAME (Table->Signature, ACPI_SIG_RSDT))
{
AcpiOsFree (Table);
continue;
}
/* Allocate and link a table descriptor */
TableDesc = AcpiOsAllocate (sizeof (AE_TABLE_DESC));
TableDesc->Table = Table;
TableDesc->Next = AeTableListHead;
AeTableListHead = TableDesc;
TableCount++;
}
AcpiGbl_Optind++;
}
/* Build a local RSDT with all tables and let ACPICA process the RSDT */
Status = AeBuildLocalTables (TableCount, AeTableListHead);
if (ACPI_FAILURE (Status))
{
return (-1);
}
Status = AeInstallTables ();
if (ACPI_FAILURE (Status))
{
printf ("**** Could not load ACPI tables, %s\n", AcpiFormatException (Status));
goto enterloop;
}
/*
* Install most of the handlers.
* Override some default region handlers, especially SystemMemory
*/
Status = AeInstallEarlyHandlers ();
if (ACPI_FAILURE (Status))
{
goto enterloop;
}
/*
* TBD: Need a way to call this after the "LOAD" command
*/
Status = AcpiEnableSubsystem (InitFlags);
if (ACPI_FAILURE (Status))
{
printf ("**** Could not EnableSubsystem, %s\n", AcpiFormatException (Status));
goto enterloop;
}
Status = AcpiInitializeObjects (InitFlags);
if (ACPI_FAILURE (Status))
{
printf ("**** Could not InitializeObjects, %s\n", AcpiFormatException (Status));
goto enterloop;
}
/*
* Install handlers for "device driver" space IDs (EC,SMBus, etc.)
* and fixed event handlers
*/
AeInstallLateHandlers ();
AeMiscellaneousTests ();
}
enterloop:
if (AcpiGbl_BatchMode == 1)
{
AcpiDbRunBatchMode ();
}
else if (AcpiGbl_BatchMode == 2)
{
AcpiDbExecute (BatchBuffer, NULL, NULL, EX_NO_SINGLE_STEP);
}
else
{
/* Enter the debugger command loop */
AcpiDbUserCommands (ACPI_DEBUGGER_COMMAND_PROMPT, NULL);
}
return (0);
}
int ACPI_SYSTEM_XFACE
main (
int argc,
char **argv)
{
ACPI_NEW_TABLE_DESC *ListHead = NULL;
ACPI_STATUS Status;
UINT32 InitFlags;
int ExitCode = 0;
ACPI_DEBUG_INITIALIZE (); /* For debug version only */
signal (SIGINT, AeCtrlCHandler);
/* Init debug globals */
AcpiDbgLevel = ACPI_NORMAL_DEFAULT;
AcpiDbgLayer = 0xFFFFFFFF;
/*
* Initialize ACPICA and start debugger thread.
*
* NOTE: After ACPICA initialization, AcpiTerminate MUST be called
* before this procedure exits -- otherwise, the console may be
* left in an incorrect state.
*/
Status = AcpiInitializeSubsystem ();
ACPI_CHECK_OK (AcpiInitializeSubsystem, Status);
if (ACPI_FAILURE (Status))
{
goto ErrorExit;
}
/* ACPICA runtime configuration */
AcpiGbl_MaxLoopIterations = 400;
/* Initialize the AML debugger */
Status = AcpiInitializeDebugger ();
ACPI_CHECK_OK (AcpiInitializeDebugger, Status);
if (ACPI_FAILURE (Status))
{
goto ErrorExit;
}
printf (ACPI_COMMON_SIGNON (ACPIEXEC_NAME));
if (argc < 2)
{
usage ();
goto NormalExit;
}
/* Get the command line options */
ExitCode = AeDoOptions (argc, argv);
if (ExitCode)
{
if (ExitCode > 0)
{
ExitCode = 0;
}
goto ErrorExit;
}
/* The remaining arguments are filenames for ACPI tables */
if (!argv[AcpiGbl_Optind])
{
goto EnterDebugger;
}
AcpiGbl_CstyleDisassembly = FALSE; /* Not supported for AcpiExec */
/* Get each of the ACPI table files on the command line */
while (argv[AcpiGbl_Optind])
{
/* Get all ACPI AML tables in this file */
Status = AcGetAllTablesFromFile (argv[AcpiGbl_Optind],
ACPI_GET_ALL_TABLES, &ListHead);
if (ACPI_FAILURE (Status))
{
ExitCode = -1;
goto ErrorExit;
}
AcpiGbl_Optind++;
}
printf ("\n");
/* Build a local RSDT with all tables and let ACPICA process the RSDT */
Status = AeBuildLocalTables (ListHead);
if (ACPI_FAILURE (Status))
{
goto ErrorExit;
}
/* Install all of the ACPI tables */
Status = AeInstallTables ();
if (ACPI_FAILURE (Status))
{
printf ("**** Could not install ACPI tables, %s\n",
AcpiFormatException (Status));
goto EnterDebugger;
}
/*
* Install most of the handlers (Regions, Notify, Table, etc.)
* Override the default region handlers, especially SystemMemory,
* which is simulated in this utility.
*/
Status = AeInstallEarlyHandlers ();
if (ACPI_FAILURE (Status))
{
goto EnterDebugger;
}
/* Setup initialization flags for ACPICA */
InitFlags = (ACPI_NO_HANDLER_INIT | ACPI_NO_ACPI_ENABLE);
if (AcpiGbl_DbOpt_NoIniMethods)
{
InitFlags |= (ACPI_NO_DEVICE_INIT | ACPI_NO_OBJECT_INIT);
}
/*
* Main initialization for ACPICA subsystem
* TBD: Need a way to call this after the ACPI table "LOAD" command?
*
* NOTE: This initialization does not match the _Lxx and _Exx methods
* to individual GPEs, as there are no real GPEs when the hardware
* is simulated - because there is no namespace until AeLoadTables is
* executed. This may have to change if AcpiExec is ever run natively
* on actual hardware (such as under UEFI).
*/
Status = AcpiEnableSubsystem (InitFlags);
if (ACPI_FAILURE (Status))
{
printf ("**** Could not EnableSubsystem, %s\n",
AcpiFormatException (Status));
goto EnterDebugger;
}
Status = AeLoadTables ();
/*
* Exit namespace initialization for the "load namespace only" option.
* No control methods will be executed. However, still enter the
* the debugger.
*/
if (AcpiGbl_AeLoadOnly)
{
goto EnterDebugger;
}
if (ACPI_FAILURE (Status))
{
printf ("**** Could not load ACPI tables, %s\n",
AcpiFormatException (Status));
goto EnterDebugger;
}
/*
* Install handlers for "device driver" space IDs (EC,SMBus, etc.)
* and fixed event handlers
*/
AeInstallLateHandlers ();
/* Finish the ACPICA initialization */
Status = AcpiInitializeObjects (InitFlags);
if (ACPI_FAILURE (Status))
{
printf ("**** Could not InitializeObjects, %s\n",
AcpiFormatException (Status));
goto EnterDebugger;
}
AeMiscellaneousTests ();
EnterDebugger:
/* Exit if error above and we are in one of the batch modes */
if (ACPI_FAILURE (Status) && (AcpiGbl_ExecutionMode > 0))
{
goto ErrorExit;
}
/* Run a batch command or enter the command loop */
switch (AcpiGbl_ExecutionMode)
{
default:
case AE_MODE_COMMAND_LOOP:
AcpiRunDebugger (NULL);
break;
case AE_MODE_BATCH_MULTIPLE:
AcpiRunDebugger (BatchBuffer);
break;
case AE_MODE_BATCH_SINGLE:
AcpiDbExecute (BatchBuffer, NULL, NULL, EX_NO_SINGLE_STEP);
break;
}
/* Shut down the debugger and ACPICA */
AcpiTerminateDebugger ();
NormalExit:
ExitCode = 0;
ErrorExit:
(void) AcpiOsTerminate ();
return (ExitCode);
}