int f_mngDatetimeDone(unsigned *pMsg)
{
//func_t func;
switch(((msg_t *)pMsg)->msgType)
{
case CMSG_INIT:
g_tick = 0;
SetTimer_irq(&g_timer[0], TIMER_1SEC, CMSG_TMR);
All_Screen(0);
MDATETIME_READ("读出时间，存入到g_u8password[]中");
//g_u8menuNO = CDATETIME_MIN; //数值索引
//MDATETIME_GET(g_u8menuNO, g_u8pswordSel);
//g_u8pswordSel = MBCD2HEX(g_u8pswordSel);
DISP_GetOrSetDateTime(1);
//DISP_line3rd_menu_select(); //第三行
OLED_cleanPages(6, 7);
break;
case CMSG_TMR:
if(g_tick++ > 3) {
promptInit();
goto CGOTO_DATETIME_DONE;
}
break;
case CMSG_DKEY: /** 检测到按键按下 **/
switch(((msg_t *)pMsg)->msgValue)
{
case CKEY_asterisk:
ledPrompt(10, TIMER_100MS);
promptInit();
beep();
goto CGOTO_DATETIME_DONE;
break;
case CKEY_pound:
ledPrompt(12, TIMER_100MS);
promptInit();
beep();
CGOTO_DATETIME_DONE:
g_tick = 0;
SetTimer_irq(&g_timer[0], TIMER_100MS, CMSG_INIT);
fstack_pop(&g_fstack);
fstack_pop(&g_fstack);
break;
default: /** 可能的错误 **/
break;
}
default: /** 可能的错误 **/
break;
}
return 0;
#undef CDATETIME_MIN
#undef CDATETIME_MAX
}
/*******************************************************************************
* Description: 开锁操作完成后，是否要查低电压报警
* 低电报警
*******************************************************************************/
int f_LowPowerAlarm(unsigned *pMsg)
{
// msg_t msg;
func_t func;
switch(((msg_t *)pMsg)->msgType)
{
case CMSG_TMR: /** 低电报警提示计时 **/
g_tick++;
if(g_tick >= 10)
{
GOTO_ALLOFF:
promptInit();
fstack_init(&g_fstack);
func.func = f_idle;
fstack_push(&g_fstack, &func);
g_tick = 0;
SetTimer_irq(&g_timer[0], TIMER_1SEC, CMSG_TMR);
//SetTimer_irq(&g_timer[0], TIMER_1SEC, CMSG_INIT);
All_Screen(0);
DISP_idle();
/*******************************************************************/
}
break;
case CMSG_INIT:
promptInit();
g_tick = 0;
SetTimer_irq(&g_timer[0], TIMER_1SEC, CMSG_TMR);
if(g_flag & (1 << 9)){ /** 查低电报警 **/
/** 报警提示 **/
vp_stor(CVOPID_POWERLOW);
promptDelay(TIMER_500MS);
DISP_lowPower();
} else {
goto GOTO_ALLOFF; /** 无报警动作，直接结束 **/
}
break;
case CPMT_OVER: /** 锁体操作过程结束 **/
promptInit();
bbbeep();
promptDelay(TIMER_500MS);
break;
default:
break;
}
return 0;
}
void oled_test(void)
{
//Reset_IC();
Init_IC();
Clear_Screen();
All_Screen();
OLED_Clear();
OLED_ShowNum(0, 0, 2567890134, 10, 12);
OLED_ShowString(0, 12, "abcdefghijk");
while(1)
{
OLED_Refresh_Gram();
nrf_delay_ms(1500);
Clear_Screen();
}
}
/*******************************************************************************
* 设置时间日期
*******************************************************************************/
int f_mngDatetime(unsigned *pMsg)
{
#define CDATETIME_MIN 0
#define CDATETIME_MAX (MTABSIZE(boundary_datetime) - 1)
func_t func;
switch(((msg_t *)pMsg)->msgType)
{
case CMSG_INIT:
g_tick = 0;
SetTimer_irq(&g_timer[0], TIMER_1SEC, CMSG_TMR);
All_Screen(0);
//OLED_cleanPages(5, 5);
MDATETIME_READ("读出时间，存入到g_u8password[]中");
g_u8menuNO = CDATETIME_MIN; //数值索引
MDATETIME_COOKED(g_u8menuNO);
MDATETIME_GET(g_u8menuNO, g_u8pswordSel);
g_u8pswordSel = MBCD2HEX(g_u8pswordSel);
DISP_GetOrSetDateTime(1);
DISP_line3rd_menu_select(); //第三行
break;
case CMSG_TMR:
//SetTimer_irq(&g_timer[0], TIMER_1SEC, CMSG_TMR);
DISP_SetDateTime_Blink(g_u8menuNO, (g_tick & 0x01), MHEX2BCD(g_u8pswordSel));
g_tick++;
if(g_tick > 10) {
promptInit();
g_tick = 0;
SetTimer_irq(&g_timer[0], TIMER_100MS, CMSG_INIT);
fstack_pop(&g_fstack);
}
break;
case CMSG_DKEY: /** 检测到按键按下 **/
switch(((msg_t *)pMsg)->msgValue)
{
case CKEY_2:
ledPrompt(2, TIMER_100MS);
promptInit();
beep();
g_tick = 0;
SetTimer_irq(&g_timer[0], TIMER_1SEC, CMSG_TMR);
g_u8pswordSel = value_dec(g_u8pswordSel, boundary_datetime[g_u8menuNO][1], boundary_datetime[g_u8menuNO][0]);
DISP_SetDateTime_Blink(g_u8menuNO, 0, MHEX2BCD(g_u8pswordSel));
break;
case CKEY_8:
ledPrompt(8, TIMER_100MS);
promptInit();
beep();
g_tick = 0;
SetTimer_irq(&g_timer[0], TIMER_1SEC, CMSG_TMR);
g_u8pswordSel = value_inc(g_u8pswordSel, boundary_datetime[g_u8menuNO][1], boundary_datetime[g_u8menuNO][0]);
DISP_SetDateTime_Blink(g_u8menuNO, 0, MHEX2BCD(g_u8pswordSel));
break;
case CKEY_asterisk:
ledPrompt(10, TIMER_100MS);
promptInit();
beep();
g_tick = 0;
SetTimer_irq(&g_timer[0], TIMER_100MS, CMSG_INIT);
fstack_pop(&g_fstack);
break;
case CKEY_pound:
ledPrompt(12, TIMER_100MS);
promptInit();
beep();
g_tick = 0;
SetTimer_irq(&g_timer[0], TIMER_1SEC, CMSG_TMR);
MDATETIME_STORE(g_u8menuNO, MHEX2BCD(g_u8pswordSel));
DISP_SetDateTime_Blink(g_u8menuNO, 0, MHEX2BCD(g_u8pswordSel));
datetime_ByteWrite(boundary_datetime[g_u8menuNO][3], MHEX2BCD(g_u8pswordSel));
g_u8menuNO++;
if(g_u8menuNO < CDATETIME_MAX) {
MDATETIME_COOKED(g_u8menuNO);
MDATETIME_GET(g_u8menuNO, g_u8pswordSel);
g_u8pswordSel = MBCD2HEX(g_u8pswordSel);
DISP_SetDateTime_Blink(g_u8menuNO, 0, MHEX2BCD(g_u8pswordSel));
} else {
MDATETIME_WRITE("写入到芯片");
g_tick = 0;
SetTimer_irq(&g_timer[0], TIMER_100MS, CMSG_INIT);
func.func = f_mngDatetimeDone;
fstack_push(&g_fstack, &func);
}
break;
default: /** 可能的错误 **/
break;
}
default: /** 可能的错误 **/
break;
}
return 0;
#undef CDATETIME_MIN
#undef CDATETIME_MAX
}
/*******************************************************************************
* 开锁方式
*******************************************************************************/
int f_mngOpenMode(unsigned *pMsg)
{
#define COPENMODE_MIN 0
#define COPENMODE_MAX 2
func_t func;
switch(((msg_t *)pMsg)->msgType)
{
case CMSG_INIT:
g_tick = 0;
SetTimer_irq(&g_timer[0], TIMER_1SEC, CMSG_TMR);
g_u8menuNO = COPENMODE_MIN;
All_Screen(0);
DISP_menu_MNGSYS_line1st_OpenMode(); //第一行
DISP_L2_menu_OpenModemng(g_u8menuNO); //第二行
OLED_cleanPages(5, 5);
DISP_line3rd_menu_select(); //第三行
break;
case CMSG_DKEY: /** 检测到按键按下 **/
switch(((msg_t *)pMsg)->msgValue)
{
case CKEY_2:
ledPrompt(2, TIMER_100MS);
promptInit();
beep();
g_u8menuNO = value_dec(g_u8menuNO, COPENMODE_MAX, COPENMODE_MIN);
DISP_L2_menu_OpenModemng(g_u8menuNO);
break;
case CKEY_8:
ledPrompt(8, TIMER_100MS);
promptInit();
beep();
g_u8menuNO = value_inc(g_u8menuNO, COPENMODE_MAX, COPENMODE_MIN);
DISP_L2_menu_OpenModemng(g_u8menuNO);
break;
case CKEY_asterisk:
ledPrompt(10, TIMER_100MS);
promptInit();
beep();
g_tick = 0;
SetTimer_irq(&g_timer[0], TIMER_100MS, CMSG_INIT);
fstack_pop(&g_fstack);
break;
case CKEY_pound:
ledPrompt(12, TIMER_100MS);
promptInit();
beep();
OpenMode_setValue(g_u8menuNO);
g_tick = 0;
SetTimer_irq(&g_timer[0], TIMER_100MS, CMSG_INIT);
func.func = f_mngOpenModeDone;
fstack_push(&g_fstack, &func);
break;
default: /** 可能的错误 **/
break;
}
default: /** 可能的错误 **/
break;
}
return 0;
#undef COPENMODE_MIN
#undef COPENMODE_MAX
}
