///----------------------------------------------------------------------------
/// Function Break
///----------------------------------------------------------------------------
void ActivateDisplayShortDuration(uint16 secondsToDisplay)
{
// Check if the LCD Power was turned off
if (g_lcdPowerFlag == DISABLED)
{
g_lcdPowerFlag = ENABLED;
PowerControl(LCD_POWER_ENABLE, ON);
SoftUsecWait(LCD_ACCESS_DELAY);
SetLcdContrast(g_contrast_value);
InitLcdDisplay(); // Setup LCD segments and clear display buffer
AssignSoftTimer(LCD_POWER_ON_OFF_TIMER_NUM, (secondsToDisplay * TICKS_PER_SEC), LcdPwTimerCallBack);
// Check if the unit is monitoring, if so, reassign the monitor update timer
if (g_sampleProcessing == ACTIVE_STATE)
{
debug("Keypress Timer Mgr: enabling Monitor Update Timer.\r\n");
AssignSoftTimer(MENU_UPDATE_TIMER_NUM, ONE_SECOND_TIMEOUT, MenuUpdateTimerCallBack);
}
}
// Check if the LCD Backlight was turned off
if (g_lcdBacklightFlag == DISABLED)
{
g_lcdBacklightFlag = ENABLED;
SetLcdBacklightState(BACKLIGHT_BRIGHT);
AssignSoftTimer(LCD_BACKLIGHT_ON_OFF_TIMER_NUM, (secondsToDisplay * TICKS_PER_SEC), DisplayTimerCallBack);
}
}
///----------------------------------------------------------------------------
/// Function Break
///----------------------------------------------------------------------------
void AutoMonitorTimerCallBack(void)
{
INPUT_MSG_STRUCT mn_msg;
debug("Auto Monitor Timer callback: activated.\r\n");
// Check if the USB is currently handling an active connection
if (g_usbMassStorageState == USB_CONNECTED_AND_PROCESSING)
{
AssignSoftTimer(AUTO_MONITOR_TIMER_NUM, (uint32)(g_unitConfig.autoMonitorMode * TICKS_PER_MIN), AutoMonitorTimerCallBack);
}
else
{
// Make sure the Auto Monitor timer is disabled
ClearSoftTimer(AUTO_MONITOR_TIMER_NUM);
// Check if the unit is not already monitoring
if (g_sampleProcessing != ACTIVE_STATE)
{
if (CheckAndDisplayErrorThatPreventsMonitoring(OVERLAY))
{
AssignSoftTimer(AUTO_MONITOR_TIMER_NUM, (uint32)(g_unitConfig.autoMonitorMode * TICKS_PER_MIN), AutoMonitorTimerCallBack);
}
else // Safe to enter monitor mode
{
// Enter monitor mode with the current mode
SETUP_MENU_WITH_DATA_MSG(MONITOR_MENU, g_triggerRecord.opMode);
JUMP_TO_ACTIVE_MENU();
}
}
}
}
///----------------------------------------------------------------------------
/// Function Break
///----------------------------------------------------------------------------
void CraftInitStatusFlags(void)
{
memset(&g_modemStatus, 0, sizeof(g_modemStatus));
// Modem and craft port specific flags.
g_modemStatus.connectionState = NOP_CMD; // State flag to indicate which modem command to handle.
// Check if the Modem setup record is valid and Modem status is yes
if ((!g_modemSetupRecord.invalid) && (g_modemSetupRecord.modemStatus == YES))
{
// Signal that the modem is available
g_modemStatus.modemAvailable = YES;
AssignSoftTimer(MODEM_DELAY_TIMER_NUM, (MODEM_ATZ_DELAY), ModemDelayTimerCallback);
}
else
{
// Signal that the modem is not available
g_modemStatus.modemAvailable = NO;
}
g_modemStatus.craftPortRcvFlag = NO; // Flag to indicate that incomming data has been received.
g_modemStatus.xferState = NOP_CMD; // Flag for xmitting data to the craft.
g_modemStatus.xferMutex = NO; // Flag to stop other message command from executing.
g_modemStatus.systemIsLockedFlag = YES;
g_modemStatus.ringIndicator = 0;
g_modemStatus.xferPrintState = NO;
// Modem is being tested/debugged set debug to true.
g_modemStatus.testingPrintFlag = g_disableDebugPrinting;
// Modem is being tested/debugged, set to print to the PC
g_modemStatus.testingFlag = OFF;
}
///----------------------------------------------------------------------------
/// Function Break
///----------------------------------------------------------------------------
void MenuUpdateTimerCallBack(void)
{
INPUT_MSG_STRUCT mn_msg;
// Clear out the message parameters
mn_msg.cmd = 0; mn_msg.length = 0; mn_msg.data[0] = 0;
// Recall the current active menu to repaint the display
JUMP_TO_ACTIVE_MENU();
AssignSoftTimer(MENU_UPDATE_TIMER_NUM, ONE_SECOND_TIMEOUT, MenuUpdateTimerCallBack);
}
///----------------------------------------------------------------------------
/// Function Break
///----------------------------------------------------------------------------
void ModemResetTimerCallback(void)
{
if (g_modemResetStage == 0)
{
// If for some reason this executes, make sure the timer is disabled
ClearSoftTimer(MODEM_RESET_TIMER_NUM);
}
else if (g_modemResetStage == 1)
{
SET_DTR;
AssignSoftTimer(MODEM_RESET_TIMER_NUM, (uint32)(3 * TICKS_PER_SEC), ModemResetTimerCallback);
g_modemResetStage = 2;
}
else if (g_modemResetStage == 2)
{
UartPuts((char*)(CMDMODE_CMD_STRING), CRAFT_COM_PORT);
AssignSoftTimer(MODEM_RESET_TIMER_NUM, (uint32)(3 * TICKS_PER_SEC), ModemResetTimerCallback);
g_modemResetStage = 3;
}
else if (g_modemResetStage == 3)
{
UartPuts((char*)(CMDMODE_CMD_STRING), CRAFT_COM_PORT);
AssignSoftTimer(MODEM_RESET_TIMER_NUM, (uint32)(3 * TICKS_PER_SEC), ModemResetTimerCallback);
g_modemResetStage = 4;
}
else if (g_modemResetStage == 4)
{
UartPuts((char*)(ATH_CMD_STRING), CRAFT_COM_PORT);
UartPuts((char*)&g_CRLF, CRAFT_COM_PORT);
AssignSoftTimer(MODEM_RESET_TIMER_NUM, (uint32)(3 * TICKS_PER_SEC), ModemResetTimerCallback);
g_modemResetStage = 5;
}
else if (g_modemResetStage == 5)
{
ModemInitProcess();
g_modemResetStage = 0;
}
}
///----------------------------------------------------------------------------
/// Function Break
///----------------------------------------------------------------------------
void ModemDelayTimerCallback(void)
{
if (YES == g_modemStatus.modemAvailable)
{
if ((READ_DSR == MODEM_CONNECTED) && (READ_DCD == NO_CONNECTION))
{
ModemInitProcess();
}
else
{
AssignSoftTimer(MODEM_DELAY_TIMER_NUM, MODEM_ATZ_DELAY, ModemDelayTimerCallback);
}
}
}
///----------------------------------------------------------------------------
/// Function Break
///----------------------------------------------------------------------------
void ProcessTimerModeSettings(uint8 mode)
{
//uint8 dayOfWeek = 0;
uint8 startDay = 0;
uint8 startHour = 0;
uint16 minutesLeft = 0;
DATE_TIME_STRUCT currentTime = GetCurrentTime();
uint8 status = ValidateTimerModeSettings();
// Check if the timer mode settings check failed or if the timer mode setting has been disabled
if ((status == FAILED) || (g_unitConfig.timerMode == DISABLED))
{
g_unitConfig.timerMode = DISABLED;
SaveRecordData(&g_unitConfig, DEFAULT_RECORD, REC_UNIT_CONFIG_TYPE);
// Disable the Power Off timer in case it's set
ClearSoftTimer(POWER_OFF_TIMER_NUM);
if (mode == PROMPT)
{
sprintf((char*)g_spareBuffer, "%s %s", getLangText(TIMER_SETTINGS_INVALID_TEXT), getLangText(TIMER_MODE_DISABLED_TEXT));
MessageBox(getLangText(ERROR_TEXT), (char*)g_spareBuffer, MB_OK);
}
}
else // status == PASSED || status == IN_PROGRESS
{
// Calculate timer mode active run time in minutes
TimerModeActiveMinutes();
// Init start day based on the start date provided by the user
startDay = g_unitConfig.timerStartDate.day;
// Check if in progress, requiring extra logic to determine alarm settings
if (status == IN_PROGRESS)
{
// Check if the stop time is greater than the start time
if ((g_unitConfig.timerStopTime.hour > g_unitConfig.timerStartTime.hour) ||
((g_unitConfig.timerStopTime.hour == g_unitConfig.timerStartTime.hour) &&
(g_unitConfig.timerStopTime.min > g_unitConfig.timerStartTime.min)))
{
// Advance the start day
startDay++;
// Check if the start day is beyond the total days in the current month
if (startDay > g_monthTable[(uint8)(g_unitConfig.timerStartDate.month)].days)
{
// Set the start day to the first day of next month
startDay = 1;
}
}
}
// Check for specialty case hourly mode and in progress, requiring extra logic to determine alarm settings
if ((g_unitConfig.timerModeFrequency == TIMER_MODE_HOURLY) && (status == IN_PROGRESS))
{
// Check if another hour time slot to run again today
if (currentTime.hour != g_unitConfig.timerStopTime.hour)
{
// Start day remains the same
startDay = g_unitConfig.timerStartDate.day;
// Check if current hour time slot has not started
if (currentTime.min < g_unitConfig.timerStartTime.min)
{
// Set alarm for the same hour
startHour = currentTime.hour;
}
else
{
// Set alarm for the next hour
startHour = currentTime.hour + 1;
// Account for end of day boundary
if (startHour > 23)
{
startHour = 0;
// Advance the start day
startDay++;
// Check if the start day is beyond the total days in the current month
if (startDay > g_monthTable[(uint8)(g_unitConfig.timerStartDate.month)].days)
{
// Set the start day to the first day of next month
startDay = 1;
}
}
}
EnableExternalRtcAlarm(startDay, startHour, g_unitConfig.timerStartTime.min, 0);
}
else // This is the last hour time slot to run today, set alarm for next day
{
// startDay calculated correctly in above previous status == IN_PROGRESS logic
EnableExternalRtcAlarm(startDay, g_unitConfig.timerStartTime.hour, g_unitConfig.timerStartTime.min, 0);
}
}
else // All other timer modes
{
EnableExternalRtcAlarm(startDay, g_unitConfig.timerStartTime.hour, g_unitConfig.timerStartTime.min, 0);
}
if (status == PASSED)
{
if (mode == PROMPT)
{
sprintf((char*)g_spareBuffer, "%s %s", getLangText(TIMER_MODE_NOW_ACTIVE_TEXT), getLangText(PLEASE_POWER_OFF_UNIT_TEXT));
MessageBox(getLangText(STATUS_TEXT), (char*)g_spareBuffer, MB_OK);
}
// Check if start time is greater than the current time
if (((g_unitConfig.timerStartTime.hour * 60) + g_unitConfig.timerStartTime.min) >
((currentTime.hour * 60) + currentTime.min))
{
// Take the difference between start time and current time
minutesLeft = (uint16)(((g_unitConfig.timerStartTime.hour * 60) + g_unitConfig.timerStartTime.min) -
((currentTime.hour * 60) + currentTime.min));
}
else // Current time is after the start time, meaning the start time is the next day
{
// Take the difference between 24 hours and the current time plus the start time
minutesLeft = (uint16)((24 * 60) - ((currentTime.hour * 60) + currentTime.min) +
((g_unitConfig.timerStartTime.hour * 60) + g_unitConfig.timerStartTime.min));
}
// Check if the start time is within the next minute
if (minutesLeft <= 1)
{
OverlayMessage(getLangText(WARNING_TEXT), getLangText(POWERING_UNIT_OFF_NOW_TEXT), 2 * SOFT_SECS);
// Need to shutdown the unit now, otherwise the start time window will be missed
PowerUnitOff(SHUTDOWN_UNIT); // Return unnecessary
}
else // More than 1 minute left before the start time
{
// Make sure the unit turns off one minute before the start time if the user forgets to turn the unit off
minutesLeft -= 1;
// Need to handle state where timer mode is going active but unit hasn't power cycled into timer mode yet
g_allowQuickPowerOffForTimerModeSetup = YES;
// Set the Power off soft timer to prevent the unit from staying on past the Timer mode start time
AssignSoftTimer(POWER_OFF_TIMER_NUM, (uint32)(minutesLeft * 60 * 2), PowerOffTimerCallback);
}
}
else // status == IN_PROGRESS
{
if (mode == PROMPT)
{
sprintf((char*)g_spareBuffer, "%s", getLangText(TIMER_MODE_NOW_ACTIVE_TEXT));
MessageBox(getLangText(STATUS_TEXT), (char*)g_spareBuffer, MB_OK);
}
// Check if specialty mode hourly
if (g_unitConfig.timerModeFrequency == TIMER_MODE_HOURLY)
{
if (currentTime.min < g_unitConfig.timerStopTime.min)
{
minutesLeft = (g_unitConfig.timerStopTime.min - currentTime.min);
}
else
{
minutesLeft = (60 + g_unitConfig.timerStopTime.min - currentTime.min);
}
if (minutesLeft > 58)
minutesLeft = 58;
}
// Check if the current time is greater than the stop time, indicating that midnight boundary was crossed
else if (((currentTime.hour * 60) + currentTime.min) > ((g_unitConfig.timerStopTime.hour * 60) + g_unitConfig.timerStopTime.min))
{
// Calculate the time left before powering off to be 24 + the stop time minus the current time
minutesLeft = (uint16)(((24 * 60) + (g_unitConfig.timerStopTime.hour * 60) + g_unitConfig.timerStopTime.min) -
((currentTime.hour * 60) + currentTime.min));
}
else // Current time is less than start time, operating within the same day
{
// Calculate the time left before powering off to be the stop time minus the current time
minutesLeft = (uint16)(((g_unitConfig.timerStopTime.hour * 60) + g_unitConfig.timerStopTime.min) -
((currentTime.hour * 60) + currentTime.min));
}
// Make sure timeout value is not zero
if (minutesLeft == 0) minutesLeft = 1;
debug("Timer Mode: In progress, minutes left before power off: %d (Expired secs this min: %d)\r\n", minutesLeft, currentTime.sec);
// Setup soft timer to turn system off when timer mode is finished for the day
AssignSoftTimer(POWER_OFF_TIMER_NUM, (uint32)((minutesLeft * 60 * 2) - (currentTime.sec * 2)), PowerOffTimerCallback);
}
}
}
///----------------------------------------------------------------------------
/// Function Break
///----------------------------------------------------------------------------
void ProcessTimerMode(void)
{
DATE_TIME_STRUCT currTime = GetExternalRtcTime();
// Check if the Timer mode activated after stop date
if (// First Check for past year
(currTime.year > g_unitConfig.timerStopDate.year) ||
// Second check for equal year but past month
((currTime.year == g_unitConfig.timerStopDate.year) && (currTime.month > g_unitConfig.timerStopDate.month)) ||
// Third check for equal year, equal month, but past day
((currTime.year == g_unitConfig.timerStopDate.year) && (currTime.month == g_unitConfig.timerStopDate.month) &&
(currTime.day > g_unitConfig.timerStopDate.day)))
{
// Disable alarm output generation
debug("Timer Mode: Activated after date...\r\n");
debug("Timer Mode: Disabling...\r\n");
g_unitConfig.timerMode = DISABLED;
// Save Unit Config
SaveRecordData(&g_unitConfig, DEFAULT_RECORD, REC_UNIT_CONFIG_TYPE);
// Deactivate alarm interrupts
DisableExternalRtcAlarm();
// Turn unit off/sleep
debug("Timer mode: Powering unit off...\r\n");
PowerUnitOff(SHUTDOWN_UNIT); // Return unnecessary
}
// Check if the Timer mode activated before start date
else if (// First Check for before year
(currTime.year < g_unitConfig.timerStartDate.year) ||
// Second check for equal year but before month
((currTime.year == g_unitConfig.timerStartDate.year) && (currTime.month < g_unitConfig.timerStartDate.month)) ||
// Third check for equal year, equal month, but before day
((currTime.year == g_unitConfig.timerStartDate.year) && (currTime.month == g_unitConfig.timerStartDate.month) &&
(currTime.day < g_unitConfig.timerStartDate.day)))
{
debug("Timer Mode: Activated before date...\r\n");
ResetTimeOfDayAlarm();
// Turn unit off/sleep
debug("Timer mode: Powering unit off...\r\n");
PowerUnitOff(SHUTDOWN_UNIT); // Return unnecessary
}
// Check if the Timer mode activated during active dates but on an off day
else if ((g_unitConfig.timerModeFrequency == TIMER_MODE_WEEKDAYS) && ((currTime.weekday == SAT) || (currTime.weekday == SUN)))
{
debug("Timer Mode: Activated on an off day (weekday freq)...\r\n");
ResetTimeOfDayAlarm();
// Turn unit off/sleep
debug("Timer mode: Powering unit off...\r\n");
PowerUnitOff(SHUTDOWN_UNIT); // Return unnecessary
}
// Check if the Timer mode activated during active dates but on an off day
else if ((g_unitConfig.timerModeFrequency == TIMER_MODE_MONTHLY) && (currTime.day != g_unitConfig.timerStartDate.day))
{
debug("Timer Mode: Activated on off day (monthly freq)...\r\n");
ResetTimeOfDayAlarm();
// Turn unit off/sleep
debug("Timer mode: Powering unit off...\r\n");
PowerUnitOff(SHUTDOWN_UNIT); // Return unnecessary
}
// Check if the Timer mode activated on end date (and not hourly mode)
else if ((g_unitConfig.timerModeFrequency != TIMER_MODE_HOURLY) && (currTime.year == g_unitConfig.timerStopDate.year) &&
(currTime.month == g_unitConfig.timerStopDate.month) && (currTime.day == g_unitConfig.timerStopDate.day))
{
// Disable alarm output generation
debug("Timer Mode: Activated on end date...\r\n");
// Signal the timer mode end of session timer to stop timer mode due to this being the last run
g_timerModeLastRun = YES;
// Deactivate alarm interrupts
DisableExternalRtcAlarm();
}
// Check if the Timer mode activated on end date and end hour (hourly mode)
else if ((g_unitConfig.timerModeFrequency == TIMER_MODE_HOURLY) && (currTime.year == g_unitConfig.timerStopDate.year) &&
(currTime.month == g_unitConfig.timerStopDate.month) && (currTime.day == g_unitConfig.timerStopDate.day) &&
(currTime.hour == g_unitConfig.timerStopTime.hour))
{
// Disable alarm output generation
debug("Timer Mode: Activated on end date...\r\n");
// Signal the timer mode end of session timer to stop timer mode due to this being the last run
g_timerModeLastRun = YES;
// Deactivate alarm interrupts
DisableExternalRtcAlarm();
}
else // Timer mode started during the active dates on a day it's supposed to run
{
if (g_unitConfig.timerModeFrequency == TIMER_MODE_ONE_TIME)
{
// Signal the timer mode end of session timer to stop timer mode due to this being the last run
g_timerModeLastRun = YES;
// Deactivate alarm interrupts
DisableExternalRtcAlarm();
}
else // All other timer modes
{
// Reset the Time of Day Alarm to wake the unit up again
ResetTimeOfDayAlarm();
}
}
OverlayMessage(getLangText(STATUS_TEXT), getLangText(TIMER_MODE_NOW_ACTIVE_TEXT), (2 * SOFT_SECS));
raiseTimerEventFlag(TIMER_MODE_TIMER_EVENT);
// Setup soft timer to turn system off when timer mode is finished for the day (minus the expired secs in the current minute
AssignSoftTimer(POWER_OFF_TIMER_NUM, ((g_unitConfig.TimerModeActiveMinutes * 60 * 2) - (currTime.sec * 2)), PowerOffTimerCallback);
debug("Timer mode: running...\r\n");
}
///----------------------------------------------------------------------------
/// Function Break
///----------------------------------------------------------------------------
void KeypadLedUpdateTimerCallBack(void)
{
static uint8 ledState = KEYPAD_LED_STATE_UNKNOWN;
uint8 lastLedState;
uint8 config; // = ReadMcp23018(IO_ADDRESS_KPD, GPIOA);
BOOLEAN externalChargePresent = CheckExternalChargeVoltagePresent();
// States
// 1) Init complete, not monitoring, not charging --> Static Green
// 2) Init complete, not monitoring, charging --> Static Red
// 3) Init complete, monitoring, not charging --> Flashing Green (state transition)
// 4) Init complete, monitoring, charging --> Alternate Flashing Green/Red (state transition)
// Hold the last state
lastLedState = ledState;
if ((g_sampleProcessing == IDLE_STATE) && (externalChargePresent == FALSE))
{
//debug("Keypad LED: State 1\r\n");
ledState = KEYPAD_LED_STATE_IDLE_GREEN_ON;
}
else if ((g_sampleProcessing == IDLE_STATE) && (externalChargePresent == TRUE))
{
//debug("Keypad LED: State 2\r\n");
ledState = KEYPAD_LED_STATE_CHARGE_RED_ON;
}
else if ((g_sampleProcessing == ACTIVE_STATE) && (externalChargePresent == FALSE))
{
//debug("Keypad LED: State 3\r\n");
if (ledState == KEYPAD_LED_STATE_ACTIVE_GREEN_ON)
{
ledState = KEYPAD_LED_STATE_ACTIVE_GREEN_OFF;
}
else
{
ledState = KEYPAD_LED_STATE_ACTIVE_GREEN_ON;
}
}
else // ((g_sampleProcessing == ACTIVE_STATE) && (externalChargePresent == TRUE))
{
//debug("Keypad LED: State 4\r\n");
if (ledState == KEYPAD_LED_STATE_ACTIVE_CHARGE_GREEN_ON)
{
ledState = KEYPAD_LED_STATE_ACTIVE_CHARGE_RED_ON;
}
else
{
ledState = KEYPAD_LED_STATE_ACTIVE_CHARGE_GREEN_ON;
}
}
// Check if the state changed
if (ledState != lastLedState)
{
config = ReadMcp23018(IO_ADDRESS_KPD, GPIOA);
switch (ledState)
{
case KEYPAD_LED_STATE_BOTH_OFF:
case KEYPAD_LED_STATE_ACTIVE_GREEN_OFF:
config &= ~RED_LED_PIN;
config &= ~GREEN_LED_PIN;
break;
case KEYPAD_LED_STATE_IDLE_GREEN_ON:
case KEYPAD_LED_STATE_ACTIVE_GREEN_ON:
case KEYPAD_LED_STATE_ACTIVE_CHARGE_GREEN_ON:
config &= ~RED_LED_PIN;
config |= GREEN_LED_PIN;
break;
case KEYPAD_LED_STATE_CHARGE_RED_ON:
case KEYPAD_LED_STATE_ACTIVE_CHARGE_RED_ON:
config &= ~GREEN_LED_PIN;
config |= RED_LED_PIN;
break;
}
WriteMcp23018(IO_ADDRESS_KPD, GPIOA, config);
}
AssignSoftTimer(KEYPAD_LED_TIMER_NUM, ONE_SECOND_TIMEOUT, KeypadLedUpdateTimerCallBack);
}
void InitSoftwareSettings_NS8100(void)
{
INPUT_MSG_STRUCT mn_msg;
debug("Init Software Settings...\r\n");
//-------------------------------------------------------------------------
// Init version msg
//-------------------------------------------------------------------------
InitVersionMsg();
//-------------------------------------------------------------------------
// Init time msg and update current time
//-------------------------------------------------------------------------
InitTimeMsg();
UpdateCurrentTime();
//-------------------------------------------------------------------------
// Get the function address passed by the bootloader
//-------------------------------------------------------------------------
CheckBootloaderAppPresent(); debug("Bootloader check complete\r\n");
//-------------------------------------------------------------------------
// Load the Unit Config
//-------------------------------------------------------------------------
LoadUnitConfig(); debug("Loading Unit Config record\r\n");
//-------------------------------------------------------------------------
// Build the language table based on the user's last language choice
//-------------------------------------------------------------------------
BuildLanguageLinkTable(g_unitConfig.languageMode); debug("Language Tables built\r\n");
//-------------------------------------------------------------------------
// Initialize Unit Config items such as contrast, timers
//-------------------------------------------------------------------------
ActivateUnitConfigOptions(); debug("Activated Unit Config Options\r\n");
//-------------------------------------------------------------------------
// Display the Splash screen
//-------------------------------------------------------------------------
DisplaySplashScreen(); debug("Display Splash screen complete\r\n");
//-------------------------------------------------------------------------
// Wait at least 3 seconds for the main screen to be displayed
//-------------------------------------------------------------------------
debug("Three second delay for Splash screen\r\n");
SoftUsecWait(3 * SOFT_SECS);
//-------------------------------------------------------------------------
// Display Smart Sensor information if found
//-------------------------------------------------------------------------
DisplaySmartSensorInfo(INFO_ON_INIT);
//-------------------------------------------------------------------------
// Bootloader entry check
//-------------------------------------------------------------------------
BootloaderEntryCheck();
//-------------------------------------------------------------------------
// Load the Factory Setup Record
//-------------------------------------------------------------------------
LoadFactorySetupRecord(); debug("Factory setup record loaded\r\n");
//-------------------------------------------------------------------------
// Load Default Trigger Record
//-------------------------------------------------------------------------
LoadDefaultTriggerRecord(); debug("Default Trigger record loaded\r\n");
//-------------------------------------------------------------------------
// Load the Modem Setup Record
//-------------------------------------------------------------------------
LoadModemSetupRecord(); debug("Modem Setup record loaded\r\n");
//-------------------------------------------------------------------------
// Add OnOff Log Timestamp
//-------------------------------------------------------------------------
AddOnOffLogTimestamp(ON); debug("On/Off Log timestamp appended\r\n");
#if 0 // Removed debug log file due to inducing system problems
//-------------------------------------------------------------------------
// Switch Debug Log file
SwitchDebugLogFile();
#endif
//-------------------------------------------------------------------------
// Init Global Unique Event Number
//-------------------------------------------------------------------------
InitCurrentEventNumber(); debug("Current Event Number initialized\r\n");
//-------------------------------------------------------------------------
// Init AutoDialout
//-------------------------------------------------------------------------
InitAutoDialout(); debug("Auto Dialout initialized\r\n");
//-------------------------------------------------------------------------
// Init Monitor Log
//-------------------------------------------------------------------------
InitMonitorLog(); debug("Monitor Log initialized\r\n");
//-------------------------------------------------------------------------
// Init the Sensor Parameters
//-------------------------------------------------------------------------
InitSensorParameters(g_factorySetupRecord.seismicSensorType, (uint8)g_triggerRecord.srec.sensitivity); debug("Sensor Parameters initialized\r\n");
//-------------------------------------------------------------------------
// Init the Summary List file
//-------------------------------------------------------------------------
ManageEventsDirectory();
InitSummaryListFile(); debug("Summary List initialized\r\n");
//-------------------------------------------------------------------------
// Update Flash Usage Stats
//-------------------------------------------------------------------------
OverlayMessage(getLangText(STATUS_TEXT), getLangText(CALCULATING_EVENT_STORAGE_SPACE_FREE_TEXT), 0);
GetSDCardUsageStats(); debug("Flash Usage Stats updated (Cluster size: %d bytes)\r\n", g_sdCardUsageStats.clusterSizeInBytes);
//-------------------------------------------------------------------------
// Check for Timer mode activation
//-------------------------------------------------------------------------
if (TimerModeActiveCheck() == TRUE)
{
debug("--- Timer Mode Startup ---\r\n");
ProcessTimerMode();
}
else // Normal startup
{
debug("--- Normal Startup ---\r\n");
}
//-------------------------------------------------------------------------
// Init the cmd message handling buffers before initialization of the ports.
//-------------------------------------------------------------------------
RemoteCmdMessageHandlerInit(); debug("Craft Message Handler initialized\r\n");
//-------------------------------------------------------------------------
// Init the input buffers and status flags for input craft data.
//-------------------------------------------------------------------------
CraftInitStatusFlags(); debug("Craft Status flags initilaized\r\n");
//-------------------------------------------------------------------------
// Signal remote end that RS232 Comm is available
//-------------------------------------------------------------------------
SET_RTS; SET_DTR; debug("Craft RTS and DTR enabled\r\n");
//-------------------------------------------------------------------------
// Reset LCD timers
//-------------------------------------------------------------------------
ResetSoftTimer(LCD_BACKLIGHT_ON_OFF_TIMER_NUM);
ResetSoftTimer(LCD_POWER_ON_OFF_TIMER_NUM);
//-------------------------------------------------------------------------
// Turn on the Green keypad LED when system init complete
//-------------------------------------------------------------------------
debug("Init complete, turning Kepypad LED Green...\r\n");
WriteMcp23018(IO_ADDRESS_KPD, GPIOA, ((ReadMcp23018(IO_ADDRESS_KPD, GPIOA) & 0xCF) | GREEN_LED_PIN));
//-------------------------------------------------------------------------
// Assign a one second keypad led update timer
//-------------------------------------------------------------------------
AssignSoftTimer(KEYPAD_LED_TIMER_NUM, ONE_SECOND_TIMEOUT, KeypadLedUpdateTimerCallBack); debug("Keypad LED Timer initialized\r\n");
//-------------------------------------------------------------------------
// Jump to the true main menu
//-------------------------------------------------------------------------
debug("Jumping to Main Menu\r\n");
SETUP_MENU_MSG(MAIN_MENU);
JUMP_TO_ACTIVE_MENU();
//-------------------------------------------------------------------------
// Enable Craft input (delayed to prevent serial input from locking unit)
//-------------------------------------------------------------------------
InitCraftInterruptBuffers();
Setup_8100_Usart1_RS232_ISR();
if (GET_HARDWARE_ID == HARDWARE_ID_REV_8_WITH_GPS_MOD)
{
EnableGps();
}
//-------------------------------------------------------------------------
// Enable keypad key input (delayed to prevent key input from locking unit)
//-------------------------------------------------------------------------
EnableMcp23018Interrupts(); debug("Mcp23018 interrupts enabled\r\n");
//-------------------------------------------------------------------------
// Display last line of system init
//-------------------------------------------------------------------------
DisplayVersionToDebug();
}
