/*---------------------------------------------------------------------------*
* Routine: WIFI_init
*---------------------------------------------------------------------------*
* Description:
* Initial setting + DHCP and show status on the LCD.
*
* Inputs:
* void
* Outputs:
* ATLIBGS_MSG_ID_E
*---------------------------------------------------------------------------*/
ATLIBGS_MSG_ID_E WIFI_init(int16_t showMessage)
{
ATLIBGS_MSG_ID_E rxMsgId = ATLIBGS_MSG_ID_NONE;
char wifi_mac[20];
// Check the link
#ifdef HOST_APP_DEBUG_ENABLE
ConsolePrintf("Checking link\r\n");
#endif
AtLibGs_Init();
// Wait for the banner
MSTimerDelay(500);
// Send command to check
do {
AtLibGs_FlushIncomingMessage();
DisplayLCD(LCD_LINE8, "Checking...");
rxMsgId = AtLibGs_Check();
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
do {
rxMsgId = AtLibGs_SetEcho(0); // disable Echo
}while (ATLIBGS_MSG_ID_OK != rxMsgId);
do {
rxMsgId = AtLibGs_Version(); // check the GS version
}while (ATLIBGS_MSG_ID_OK != rxMsgId);
// Get MAC Address & Show
rxMsgId = AtLibGs_GetMAC(wifi_mac);
if (rxMsgId == ATLIBGS_MSG_ID_OK)
AtLibGs_ParseGetMacResponse(wifi_mac);
memset(&wifi_mac[12], 0, 7);
if (showMessage > 0) {
DisplayLCD(LCD_LINE5, "MAC ADDRESS");
DisplayLCD(LCD_LINE6, (const uint8_t *)wifi_mac);
DisplayLCD(LCD_LINE2, (const uint8_t *)AppVersion);
MSTimerDelay(2000);
DisplayLCD(LCD_LINE2, " ");
}
do {
AtLibGs_FlushIncomingMessage();
DisplayLCD(LCD_LINE8, "Disassociate");
rxMsgId = AtLibGs_DisAssoc();
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
// Enable DHCP
do {
DisplayLCD(LCD_LINE8, "DHCP On...");
rxMsgId = AtLibGs_DHCPSet(1);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
if(strlen(GNV_Setting.webprov.ssid) > 0)
{
if(GNV_Setting.webprov.security == ATLIBGS_PROVSECU_WEP)
{
do {
DisplayLCD(LCD_LINE8, " Setting WEP");
rxMsgId = AtLibGs_SetWEP1((int8_t*)GNV_Setting.webprov.password);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
DisplayLCD(LCD_LINE8, " WEP Set");
}
else if(GNV_Setting.webprov.security == ATLIBGS_PROVSECU_WPA_PER)
{
do {
DisplayLCD(LCD_LINE8, " Setting PSK");
rxMsgId = AtLibGs_CalcNStorePSK(GNV_Setting.webprov.ssid, GNV_Setting.webprov.password);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
DisplayLCD(LCD_LINE8, " PSK Set");
}
else if(GNV_Setting.webprov.security == ATLIBGS_PROVSECU_WPA_ENT)
{
// Set AT+WAUTH=0 for WPA or WPA2
do {
DisplayLCD(LCD_LINE8, " " );
rxMsgId = AtLibGs_SetAuthentictionMode(ATLIBGS_AUTHMODE_NONE_WPA);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
// Security Configuration
do {
DisplayLCD(LCD_LINE8, "Set Security");
rxMsgId = AtLibGs_SetSecurity(ATLIBGS_SMAUTO);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
}
}
else
{
#ifdef HOST_APP_SEC_WEP
// Set AT+WAUTH=2 for WEP
do {
DisplayLCD(LCD_LINE8, " WEP AUTH " );
rxMsgId = AtLibGs_SetAuthentictionMode(2);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
// Set WEP
do {
rxMsgId = AtLibGs_SetWEP1(HOST_APP_AP_SEC_WEP);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
// Security Configuration
do {
rxMsgId = AtLibGs_SetSecurity(2); // WEP
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
#endif
#ifdef HOST_APP_SEC_PSK
// Store the PSK value. This call takes might take few seconds to return
do {
DisplayLCD(LCD_LINE8, "Setting PSK");
rxMsgId = AtLibGs_CalcNStorePSK(HOST_APP_AP_SSID, HOST_APP_AP_SEC_PSK);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
#endif
#ifdef HOST_APP_SEC_OPEN
// Store the PSK value. This call takes might take few seconds to return
do {
DisplayLCD(LCD_LINE8, "No Security" );
rxMsgId = AtLibGs_SetAuthentictionMode(1);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
#endif
#ifdef HOST_APP_WPA
// Set AT+WAUTH=0 for WPA or WPA2
do {
DisplayLCD(LCD_LINE8, " WPA " );
rxMsgId = AtLibGs_SetAuthentictionMode(0);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
// Store the PSK value. This call takes might take few seconds to return
do {
DisplayLCD(LCD_LINE8, "Setting PSK");
rxMsgId = AtLibGs_CalcNStorePSK(HOST_APP_AP_SSID, HOST_APP_AP_SEC_PSK);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
// Security Configuration
do {
DisplayLCD(LCD_LINE8, " WPA ");
rxMsgId = AtLibGs_SetSecurity(4);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
#endif
#ifdef HOST_APP_WPA2
// Set AT+WAUTH=0 for WPA or WPA2
do {
DisplayLCD(LCD_LINE8, " WPA2 " );
rxMsgId = AtLibGs_SetAuthentictionMode(ATLIBGS_AUTHMODE_NONE_WPA);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
// Store the PSK value. This call takes might take few seconds to return
do {
DisplayLCD(LCD_LINE8, "Setting PSK");
rxMsgId = AtLibGs_CalcNStorePSK(HOST_APP_AP_SSID, HOST_APP_AP_SEC_PSK);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
// Security Configuration
do {
DisplayLCD(LCD_LINE8, " Set WPA ");
rxMsgId = AtLibGs_SetSecurity(ATLIBGS_SMWPA2PSK);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
#endif
}
// Clear MAC Address and show WIFI
DisplayLCD(LCD_LINE6, " WIFI ");
DisplayLCD(LCD_LINE5, " ");
return rxMsgId;
}
ATLIBGS_MSG_ID_E WIFI_init(int16_t showMessage)
{
ATLIBGS_MSG_ID_E rxMsgId = ATLIBGS_MSG_ID_NONE;
// Check the link
#ifdef HOST_APP_DEBUG_ENABLE
ConsolePrintf("Checking link\r\n");
#endif
AtLibGs_Init();
// Wait for the banner
MSTimerDelay(500);
/* Send command to check */
do {
AtLibGs_FlushIncomingMessage();
DisplayLCD(LCD_LINE4, "wl_check.. ");
rxMsgId = AtLibGs_Check();
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
do {
rxMsgId = AtLibGs_SetEcho(0); // disable Echo
}while (ATLIBGS_MSG_ID_OK != rxMsgId);
do {
rxMsgId = AtLibGs_Version(); // check the GS version
}while (ATLIBGS_MSG_ID_OK != rxMsgId);
#if 0
if(strstr((const char *)MRBuffer, "2.3.")) // still debug why receive 2 extra bytes: ESC S
{
G_Extra2B = 2;
}
#endif
do{
rxMsgId = AtLibGs_EnableRadio(1); // enable radio
}while(rxMsgId != ATLIBGS_MSG_ID_OK);
/* Get MAC Address & Show */
rxMsgId = AtLibGs_GetMAC(WiFiMAC);
if (rxMsgId == ATLIBGS_MSG_ID_OK)
AtLibGs_ParseGetMacResponse(WifiMAC);
if (showMessage > 0) {
DisplayLCD(LCD_LINE3, (const uint8_t *)WifiMAC);
MSTimerDelay(2000);
}
do {
AtLibGs_FlushIncomingMessage();
DisplayLCD(LCD_LINE4, "wl_disass.. ");
rxMsgId = AtLibGs_DisAssoc();
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
// Enable DHCP
do {
DisplayLCD(LCD_LINE4, "wl_dhcpon.. ");
rxMsgId = AtLibGs_DHCPSet(1);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
if(strlen(GNV_Setting.webprov.ssid) > 0)
{
if(GNV_Setting.webprov.security == ATLIBGS_PROVSECU_WEP)
{
do {
DisplayLCD(LCD_LINE4, "wl_setwep.. ");
rxMsgId = AtLibGs_SetWEP1((int8_t*)GNV_Setting.webprov.password);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
DisplayLCD(LCD_LINE4, "wl_wepset.. ");
}
else if(GNV_Setting.webprov.security == ATLIBGS_PROVSECU_WPA_PER)
{
do {
DisplayLCD(LCD_LINE4, "wl_setpsk.. ");
rxMsgId = AtLibGs_CalcNStorePSK(GNV_Setting.webprov.ssid, GNV_Setting.webprov.password);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
DisplayLCD(LCD_LINE4, "wl_pskset.. ");
}
else if(GNV_Setting.webprov.security == ATLIBGS_PROVSECU_WPA_ENT)
{
/* Set AT+WAUTH=0 for WPA or WPA2 */
do {
DisplayLCD(LCD_LINE4, " " );
rxMsgId = AtLibGs_SetAuthentictionMode(ATLIBGS_AUTHMODE_NONE_WPA);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
/* Security Configuration */
do {
DisplayLCD(LCD_LINE4, "wl_setsec.. ");
rxMsgId = AtLibGs_SetSecurity(ATLIBGS_SMAUTO);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
}
}
else
{
#ifdef HOST_APP_SEC_WEP
// Set AT+WAUTH=2 for WEP
do {
DisplayLCD(LCD_LINE4, "wl_wepauth.." );
rxMsgId = AtLibGs_SetAuthentictionMode(2);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
// Set WEP
do {
rxMsgId = AtLibGs_SetWEP1(HOST_APP_AP_SEC_WEP);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
/* Security Configuration */
do {
rxMsgId = AtLibGs_SetSecurity(2); // WEP
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
#endif
#ifdef HOST_APP_SEC_PSK
/* Store the PSK value. This call takes might take few seconds to return */
do {
DisplayLCD(LCD_LINE4, "wl_setpsk.. ");
rxMsgId = AtLibGs_CalcNStorePSK(HOST_APP_AP_SSID, HOST_APP_AP_SEC_PSK);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
#endif
#ifdef HOST_APP_SEC_OPEN
/* Store the PSK value. This call takes might take few seconds to return */
do {
DisplayLCD(LCD_LINE4, "wl_nosec.. " );
rxMsgId = AtLibGs_SetAuthentictionMode(1);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
#endif
#ifdef HOST_APP_WPA
// Set AT+WAUTH=0 for WPA or WPA2
do {
DisplayLCD(LCD_LINE4, "wl_wpa.. " );
rxMsgId = AtLibGs_SetAuthentictionMode(0);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
/* Store the PSK value. This call takes might take few seconds to return */
do {
DisplayLCD(LCD_LINE4, "wl_setpsk.. ");
rxMsgId = AtLibGs_CalcNStorePSK(HOST_APP_AP_SSID, HOST_APP_AP_SEC_PSK);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
/* Security Configuration */
do {
DisplayLCD(LCD_LINE4, "wl_wpa.. ");
rxMsgId = AtLibGs_SetSecurity(4);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
#endif
#ifdef HOST_APP_WPA2
// Set AT+WAUTH=0 for WPA or WPA2
do {
DisplayLCD(LCD_LINE4, "wl_wpa2.. " );
rxMsgId = AtLibGs_SetAuthentictionMode(ATLIBGS_AUTHMODE_NONE_WPA);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
/* Store the PSK value. This call takes might take few seconds to return */
do {
DisplayLCD(LCD_LINE4, "wl_setpsk.. ");
rxMsgId = AtLibGs_CalcNStorePSK(HOST_APP_AP_SSID, HOST_APP_AP_SEC_PSK);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
/* Security Configuration */
do {
DisplayLCD(LCD_LINE4, "wl_setwpa.. ");
rxMsgId = AtLibGs_SetSecurity(ATLIBGS_SMWPA2PSK);
} while (ATLIBGS_MSG_ID_OK != rxMsgId);
#endif
}
return rxMsgId;
}
bool GS_API_JoinNetwork() {
bool joined = false;
uint8_t security = atoi(apiNetworkConfig.security);
// Set all the configuration options
// Check for DHCP Enabled
if (atoi(apiNetworkConfig.dhcpEnabled)) {
if (!gs_api_handle_cmd_resp(AtLibGs_DHCPSet(1)))
return joined;
} else {
if (!gs_api_handle_cmd_resp(AtLibGs_DHCPSet(0)))
return joined;
if (!gs_api_handle_cmd_resp(
AtLibGs_IPSet((int8_t*)apiNetworkConfig.staticIp,
(int8_t*)apiNetworkConfig.subnetMask,
(int8_t*)apiNetworkConfig.gatewayIp)))
return joined;
}
// Check security
switch (security) {
case 0:
// Set all
// Don't check these since some might not be valid anyway
AtLibGs_SetPassPhrase((int8_t*)apiNetworkConfig.passphrase);
AtLibGs_SetWepKey(atoi(apiNetworkConfig.wepId), apiNetworkConfig.wepKey);
AtLibGs_SetAuthMode(0);
break;
case 1:
// Set none
break;
case 2:
// Set WEP
if (!gs_api_handle_cmd_resp(
AtLibGs_SetWepKey(atoi(apiNetworkConfig.wepId),
apiNetworkConfig.wepKey)))
return joined;
if (!gs_api_handle_cmd_resp(AtLibGs_SetAuthMode(0)))
return joined;
break;
case 4:
case 8:
case 16:
case 32:
case 64:
// Set WPA
if (!gs_api_handle_cmd_resp(AtLibGs_SetPassPhrase((int8_t*)apiNetworkConfig.passphrase)))
return joined;
break;
default:
// nothing
break;
}
// Set the security mode
if(!gs_api_handle_cmd_resp(AtLibGs_SetSecurity(security)))
return joined;
// Set adhoc or infrastructure
if(!gs_api_handle_cmd_resp(AtLibGs_Mode(atoi(apiNetworkConfig.connType))))
return joined;
// Associate
if(gs_api_handle_cmd_resp(AtLibGs_Assoc((int8_t*)apiNetworkConfig.ssid,(int8_t*)"", (int8_t*)apiNetworkConfig.channel))){
joined = true;
// Clear all data handler functions
memset(cidDataHandlers, 0, sizeof(cidDataHandlers));
}
return joined;
}
/**
* @brief Set up WiFi network
*
* initialize and set up WiFi parameters for desired WiFi network
*
* @param Network Configuration struct
*
* @return True if successful
*/
bool GS_API_SetupWifiNetwork(HOST_APP_NETWORK_CONFIG_T* apiNetCfg) {
bool set = false;
uint8_t security = atoi(apiNetCfg->security);
// Set all the configuration options
// Check for DHCP Enabled
if (atoi(apiNetCfg->dhcpEnabled)) {
if (!gs_api_handle_cmd_resp(AtLibGs_DHCPSet(1)))
{
return set;
}
} else {
if (!gs_api_handle_cmd_resp(AtLibGs_DHCPSet(0)))
return set;
if (!gs_api_handle_cmd_resp(
AtLibGs_IPSet((int8_t *) apiNetCfg->staticIp,
(int8_t *) apiNetCfg->subnetMask,
(int8_t *) apiNetCfg->gatewayIp)))
return set;
}
// Check security
switch (security) {
case 0:
// Set all
// Don't check these since some might not be valid anyway
if (!gs_api_handle_cmd_resp(
AtLibGs_SetPassPhrase((int8_t *) apiNetCfg->passphrase)))
return set;
if (!gs_api_handle_cmd_resp(AtLibGs_SetAuthMode(0)))
return set;
break;
case 1:
// Set none
break;
case 2:
// Set WEP
if (!gs_api_handle_cmd_resp(
AtLibGs_SetWepKey(atoi(apiNetCfg->wepId),
apiNetCfg->wepKey)))
return set;
if (!gs_api_handle_cmd_resp(AtLibGs_SetAuthMode(0)))
return set;
break;
case 4:
case 8:
case 16:
case 32:
case 64:
// Set WPA
if (!gs_api_handle_cmd_resp(AtLibGs_SetPassPhrase((int8_t *) apiNetCfg->passphrase)))
return set;
break;
default:
// nothing
break;
}
// Set the security mode
if(!gs_api_handle_cmd_resp(AtLibGs_SetSecurity(security)))
return set;
// Set adhoc or infrastructure
if(!gs_api_handle_cmd_resp(AtLibGs_Mode(atoi(apiNetCfg->connType))))
return set;
return set;
}
