/**
* Segment the page according to the current value of tessedit_pageseg_mode.
* pix_binary_ is used as the source image and should not be NULL.
* On return the blocks list owns all the constructed page layout.
*/
int Tesseract::SegmentPage(const STRING* input_file, BLOCK_LIST* blocks,
Tesseract* osd_tess, OSResults* osr) {
ASSERT_HOST(pix_binary_ != NULL);
int width = pixGetWidth(pix_binary_);
int height = pixGetHeight(pix_binary_);
// Get page segmentation mode.
PageSegMode pageseg_mode = static_cast<PageSegMode>(
static_cast<int>(tessedit_pageseg_mode));
// If a UNLV zone file can be found, use that instead of segmentation.
if (!PSM_COL_FIND_ENABLED(pageseg_mode) &&
input_file != NULL && input_file->length() > 0) {
STRING name = *input_file;
const char* lastdot = strrchr(name.string(), '.');
if (lastdot != NULL)
name[lastdot - name.string()] = '\0';
read_unlv_file(name, width, height, blocks);
}
if (blocks->empty()) {
// No UNLV file present. Work according to the PageSegMode.
// First make a single block covering the whole image.
BLOCK_IT block_it(blocks);
BLOCK* block = new BLOCK("", TRUE, 0, 0, 0, 0, width, height);
block->set_right_to_left(right_to_left());
block_it.add_to_end(block);
} else {
// UNLV file present. Use PSM_SINGLE_BLOCK.
pageseg_mode = PSM_SINGLE_BLOCK;
}
int auto_page_seg_ret_val = 0;
TO_BLOCK_LIST to_blocks;
if (PSM_OSD_ENABLED(pageseg_mode) || PSM_BLOCK_FIND_ENABLED(pageseg_mode) ||
PSM_SPARSE(pageseg_mode)) {
auto_page_seg_ret_val =
AutoPageSeg(pageseg_mode, blocks, &to_blocks, osd_tess, osr);
if (pageseg_mode == PSM_OSD_ONLY)
return auto_page_seg_ret_val;
// To create blobs from the image region bounds uncomment this line:
// to_blocks.clear(); // Uncomment to go back to the old mode.
} else {
deskew_ = FCOORD(1.0f, 0.0f);
reskew_ = FCOORD(1.0f, 0.0f);
if (pageseg_mode == PSM_CIRCLE_WORD) {
Pix* pixcleaned = RemoveEnclosingCircle(pix_binary_);
if (pixcleaned != NULL) {
pixDestroy(&pix_binary_);
pix_binary_ = pixcleaned;
}
}
}
if (auto_page_seg_ret_val < 0) {
return -1;
}
if (blocks->empty()) {
if (textord_debug_tabfind)
tprintf("Empty page\n");
return 0; // AutoPageSeg found an empty page.
}
textord_.TextordPage(pageseg_mode, width, height, pix_binary_,
blocks, &to_blocks);
return auto_page_seg_ret_val;
}
/**
* Segment the page according to the current value of tessedit_pageseg_mode.
* pix_binary_ is used as the source image and should not be NULL.
* On return the blocks list owns all the constructed page layout.
*/
int Tesseract::SegmentPage(const STRING* input_file, BLOCK_LIST* blocks,
Tesseract* osd_tess, OSResults* osr) {
ASSERT_HOST(pix_binary_ != NULL);
int width = pixGetWidth(pix_binary_);
int height = pixGetHeight(pix_binary_);
// Get page segmentation mode.
PageSegMode pageseg_mode = static_cast<PageSegMode>(
static_cast<int>(tessedit_pageseg_mode));
// If a UNLV zone file can be found, use that instead of segmentation.
if (!PSM_COL_FIND_ENABLED(pageseg_mode) &&
input_file != NULL && input_file->length() > 0) {
STRING name = *input_file;
const char* lastdot = strrchr(name.string(), '.');
if (lastdot != NULL)
name[lastdot - name.string()] = '\0';
read_unlv_file(name, width, height, blocks);
}
if (blocks->empty()) {
// No UNLV file present. Work according to the PageSegMode.
// First make a single block covering the whole image.
BLOCK_IT block_it(blocks);
BLOCK* block = new BLOCK("", TRUE, 0, 0, 0, 0, width, height);
block->set_right_to_left(right_to_left());
block_it.add_to_end(block);
} else {
// UNLV file present. Use PSM_SINGLE_BLOCK.
pageseg_mode = PSM_SINGLE_BLOCK;
}
// The diacritic_blobs holds noise blobs that may be diacritics. They
// are separated out on areas of the image that seem noisy and short-circuit
// the layout process, going straight from the initial partition creation
// right through to after word segmentation, where they are added to the
// rej_cblobs list of the most appropriate word. From there classification
// will determine whether they are used.
BLOBNBOX_LIST diacritic_blobs;
int auto_page_seg_ret_val = 0;
TO_BLOCK_LIST to_blocks;
if (PSM_OSD_ENABLED(pageseg_mode) || PSM_BLOCK_FIND_ENABLED(pageseg_mode) ||
PSM_SPARSE(pageseg_mode)) {
auto_page_seg_ret_val = AutoPageSeg(
pageseg_mode, blocks, &to_blocks,
enable_noise_removal ? &diacritic_blobs : NULL, osd_tess, osr);
if (pageseg_mode == PSM_OSD_ONLY)
return auto_page_seg_ret_val;
// To create blobs from the image region bounds uncomment this line:
// to_blocks.clear(); // Uncomment to go back to the old mode.
} else {
deskew_ = FCOORD(1.0f, 0.0f);
reskew_ = FCOORD(1.0f, 0.0f);
if (pageseg_mode == PSM_CIRCLE_WORD) {
Pix* pixcleaned = RemoveEnclosingCircle(pix_binary_);
if (pixcleaned != NULL) {
pixDestroy(&pix_binary_);
pix_binary_ = pixcleaned;
}
}
}
if (auto_page_seg_ret_val < 0) {
return -1;
}
if (blocks->empty()) {
if (textord_debug_tabfind)
tprintf("Empty page\n");
return 0; // AutoPageSeg found an empty page.
}
bool splitting =
pageseg_devanagari_split_strategy != ShiroRekhaSplitter::NO_SPLIT;
bool cjk_mode = textord_use_cjk_fp_model;
textord_.TextordPage(pageseg_mode, reskew_, width, height, pix_binary_,
pix_thresholds_, pix_grey_, splitting || cjk_mode,
&diacritic_blobs, blocks, &to_blocks);
return auto_page_seg_ret_val;
}
// Segment the page according to the current value of tessedit_pageseg_mode.
// If the pix_binary_ member is not NULL, it is used as the source image,
// and copied to image, otherwise it just uses image as the input.
// On return the blocks list owns all the constructed page layout.
int Tesseract::SegmentPage(const STRING* input_file,
IMAGE* image, BLOCK_LIST* blocks) {
int width = image->get_xsize();
int height = image->get_ysize();
int resolution = image->get_res();
#ifdef HAVE_LIBLEPT
if (pix_binary_ != NULL) {
width = pixGetWidth(pix_binary_);
height = pixGetHeight(pix_binary_);
resolution = pixGetXRes(pix_binary_);
}
#endif
// Zero resolution messes up the algorithms, so make sure it is credible.
if (resolution < kMinCredibleResolution)
resolution = kDefaultResolution;
// Get page segmentation mode.
PageSegMode pageseg_mode = static_cast<PageSegMode>(
static_cast<int>(tessedit_pageseg_mode));
// If a UNLV zone file can be found, use that instead of segmentation.
if (pageseg_mode != tesseract::PSM_AUTO &&
input_file != NULL && input_file->length() > 0) {
STRING name = *input_file;
const char* lastdot = strrchr(name.string(), '.');
if (lastdot != NULL)
name[lastdot - name.string()] = '\0';
read_unlv_file(name, width, height, blocks);
}
bool single_column = pageseg_mode > PSM_AUTO;
if (blocks->empty()) {
// No UNLV file present. Work according to the PageSegMode.
// First make a single block covering the whole image.
BLOCK_IT block_it(blocks);
BLOCK* block = new BLOCK("", TRUE, 0, 0, 0, 0, width, height);
block_it.add_to_end(block);
} else {
// UNLV file present. Use PSM_SINGLE_COLUMN.
pageseg_mode = PSM_SINGLE_COLUMN;
}
TO_BLOCK_LIST land_blocks, port_blocks;
TBOX page_box;
if (pageseg_mode <= PSM_SINGLE_COLUMN) {
if (AutoPageSeg(width, height, resolution, single_column,
image, blocks, &port_blocks) < 0) {
return -1;
}
// To create blobs from the image region bounds uncomment this line:
// port_blocks.clear(); // Uncomment to go back to the old mode.
} else {
#if HAVE_LIBLEPT
image->FromPix(pix_binary_);
#endif
deskew_ = FCOORD(1.0f, 0.0f);
reskew_ = FCOORD(1.0f, 0.0f);
}
if (blocks->empty()) {
tprintf("Empty page\n");
return 0; // AutoPageSeg found an empty page.
}
if (port_blocks.empty()) {
// AutoPageSeg was not used, so we need to find_components first.
find_components(blocks, &land_blocks, &port_blocks, &page_box);
} else {
// AutoPageSeg does not need to find_components as it did that already.
page_box.set_left(0);
page_box.set_bottom(0);
page_box.set_right(width);
page_box.set_top(height);
// Filter_blobs sets up the TO_BLOCKs the same as find_components does.
filter_blobs(page_box.topright(), &port_blocks, true);
}
TO_BLOCK_IT to_block_it(&port_blocks);
ASSERT_HOST(!port_blocks.empty());
TO_BLOCK* to_block = to_block_it.data();
if (pageseg_mode <= PSM_SINGLE_BLOCK ||
to_block->line_size < 2) {
// For now, AUTO, SINGLE_COLUMN and SINGLE_BLOCK all map to the old
// textord. The difference is the number of blocks and how the are made.
textord_page(page_box.topright(), blocks, &land_blocks, &port_blocks,
this);
} else {
// SINGLE_LINE, SINGLE_WORD and SINGLE_CHAR all need a single row.
float gradient = make_single_row(page_box.topright(),
to_block, &port_blocks, this);
if (pageseg_mode == PSM_SINGLE_LINE) {
// SINGLE_LINE uses the old word maker on the single line.
make_words(page_box.topright(), gradient, blocks,
&land_blocks, &port_blocks, this);
} else {
// SINGLE_WORD and SINGLE_CHAR cram all the blobs into a
// single word, and in SINGLE_CHAR mode, all the outlines
// go in a single blob.
make_single_word(pageseg_mode == PSM_SINGLE_CHAR,
to_block->get_rows(), to_block->block->row_list());
}
}
return 0;
}
