/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_enable */
static void bgmac_enable(struct bgmac *bgmac)
{
struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo;
u32 cmdcfg;
u32 mode;
u32 rxq_ctl;
u32 fl_ctl;
u16 bp_clk;
u8 mdp;
cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG);
bgmac_cmdcfg_maskset(bgmac, ~(BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE),
BGMAC_CMDCFG_SR(bgmac->core->id.rev), true);
udelay(2);
cmdcfg |= BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE;
bgmac_write(bgmac, BGMAC_CMDCFG, cmdcfg);
mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >>
BGMAC_DS_MM_SHIFT;
if (ci->id != BCMA_CHIP_ID_BCM47162 || mode != 0)
bgmac_set(bgmac, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
if (ci->id == BCMA_CHIP_ID_BCM47162 && mode == 2)
bcma_chipco_chipctl_maskset(&bgmac->core->bus->drv_cc, 1, ~0,
BGMAC_CHIPCTL_1_RXC_DLL_BYPASS);
switch (ci->id) {
case BCMA_CHIP_ID_BCM5357:
case BCMA_CHIP_ID_BCM4749:
case BCMA_CHIP_ID_BCM53572:
case BCMA_CHIP_ID_BCM4716:
case BCMA_CHIP_ID_BCM47162:
fl_ctl = 0x03cb04cb;
if (ci->id == BCMA_CHIP_ID_BCM5357 ||
ci->id == BCMA_CHIP_ID_BCM4749 ||
ci->id == BCMA_CHIP_ID_BCM53572)
fl_ctl = 0x2300e1;
bgmac_write(bgmac, BGMAC_FLOW_CTL_THRESH, fl_ctl);
bgmac_write(bgmac, BGMAC_PAUSE_CTL, 0x27fff);
break;
}
if (ci->id != BCMA_CHIP_ID_BCM4707 &&
ci->id != BCMA_CHIP_ID_BCM53018) {
rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL);
rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK;
bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) /
1000000;
mdp = (bp_clk * 128 / 1000) - 3;
rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT);
bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl);
}
}
/* TODO: can we just drop @force? Can we don't reset MAC at all if there is
* nothing to change? Try if after stabilizng driver.
*/
static void bgmac_cmdcfg_maskset(struct bgmac *bgmac, u32 mask, u32 set,
bool force)
{
u32 cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG);
u32 new_val = (cmdcfg & mask) | set;
bgmac_set(bgmac, BGMAC_CMDCFG, BGMAC_CMDCFG_SR(bgmac->core->id.rev));
udelay(2);
if (new_val != cmdcfg || force)
bgmac_write(bgmac, BGMAC_CMDCFG, new_val);
bgmac_mask(bgmac, BGMAC_CMDCFG, ~BGMAC_CMDCFG_SR(bgmac->core->id.rev));
udelay(2);
}
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipreset */
static void bgmac_chip_reset(struct bgmac *bgmac)
{
struct bcma_device *core = bgmac->core;
struct bcma_bus *bus = core->bus;
struct bcma_chipinfo *ci = &bus->chipinfo;
u32 flags;
u32 iost;
int i;
if (bcma_core_is_enabled(core)) {
if (!bgmac->stats_grabbed) {
/* bgmac_chip_stats_update(bgmac); */
bgmac->stats_grabbed = true;
}
for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
bgmac_dma_tx_reset(bgmac, &bgmac->tx_ring[i]);
bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false);
udelay(1);
for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
bgmac_dma_rx_reset(bgmac, &bgmac->rx_ring[i]);
/* TODO: Clear software multicast filter list */
}
iost = bcma_aread32(core, BCMA_IOST);
if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == BCMA_PKG_ID_BCM47186) ||
(ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) ||
(ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == BCMA_PKG_ID_BCM47188))
iost &= ~BGMAC_BCMA_IOST_ATTACHED;
/* 3GMAC: for BCM4707 & BCM47094, only do core reset at bgmac_probe() */
if (ci->id != BCMA_CHIP_ID_BCM4707 &&
ci->id != BCMA_CHIP_ID_BCM47094) {
flags = 0;
if (iost & BGMAC_BCMA_IOST_ATTACHED) {
flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
if (!bgmac->has_robosw)
flags |= BGMAC_BCMA_IOCTL_SW_RESET;
}
bcma_core_enable(core, flags);
}
/* Request Misc PLL for corerev > 2 */
if (core->id.rev > 2 && !bgmac_is_bcm4707_family(bgmac)) {
bgmac_set(bgmac, BCMA_CLKCTLST,
BGMAC_BCMA_CLKCTLST_MISC_PLL_REQ);
bgmac_wait_value(bgmac->core, BCMA_CLKCTLST,
BGMAC_BCMA_CLKCTLST_MISC_PLL_ST,
BGMAC_BCMA_CLKCTLST_MISC_PLL_ST,
1000);
}
if (ci->id == BCMA_CHIP_ID_BCM5357 ||
ci->id == BCMA_CHIP_ID_BCM4749 ||
ci->id == BCMA_CHIP_ID_BCM53572) {
struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc;
u8 et_swtype = 0;
u8 sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHY |
BGMAC_CHIPCTL_1_IF_TYPE_MII;
char buf[4];
if (bcm47xx_nvram_getenv("et_swtype", buf, sizeof(buf)) > 0) {
if (kstrtou8(buf, 0, &et_swtype))
bgmac_err(bgmac, "Failed to parse et_swtype (%s)\n",
buf);
et_swtype &= 0x0f;
et_swtype <<= 4;
sw_type = et_swtype;
} else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == BCMA_PKG_ID_BCM5358) {
sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII;
} else if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == BCMA_PKG_ID_BCM47186) ||
(ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) ||
(ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == BCMA_PKG_ID_BCM47188)) {
sw_type = BGMAC_CHIPCTL_1_IF_TYPE_RGMII |
BGMAC_CHIPCTL_1_SW_TYPE_RGMII;
}
bcma_chipco_chipctl_maskset(cc, 1,
~(BGMAC_CHIPCTL_1_IF_TYPE_MASK |
BGMAC_CHIPCTL_1_SW_TYPE_MASK),
sw_type);
}
if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw)
bcma_awrite32(core, BCMA_IOCTL,
bcma_aread32(core, BCMA_IOCTL) &
~BGMAC_BCMA_IOCTL_SW_RESET);
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_reset
* Specs don't say about using BGMAC_CMDCFG_SR, but in this routine
* BGMAC_CMDCFG is read _after_ putting chip in a reset. So it has to
* be keps until taking MAC out of the reset.
*/
bgmac_cmdcfg_maskset(bgmac,
~(BGMAC_CMDCFG_TE |
BGMAC_CMDCFG_RE |
BGMAC_CMDCFG_RPI |
BGMAC_CMDCFG_TAI |
BGMAC_CMDCFG_HD |
BGMAC_CMDCFG_ML |
BGMAC_CMDCFG_CFE |
BGMAC_CMDCFG_RL |
BGMAC_CMDCFG_RED |
BGMAC_CMDCFG_PE |
BGMAC_CMDCFG_TPI |
BGMAC_CMDCFG_PAD_EN |
BGMAC_CMDCFG_PF),
BGMAC_CMDCFG_PROM |
BGMAC_CMDCFG_NLC |
BGMAC_CMDCFG_CFE |
BGMAC_CMDCFG_SR(core->id.rev),
false);
bgmac->mac_speed = SPEED_UNKNOWN;
bgmac->mac_duplex = DUPLEX_UNKNOWN;
bgmac_clear_mib(bgmac);
if (core->id.id == BCMA_CORE_4706_MAC_GBIT)
bcma_maskset32(bgmac->cmn, BCMA_GMAC_CMN_PHY_CTL, ~0,
BCMA_GMAC_CMN_PC_MTE);
else
bgmac_set(bgmac, BGMAC_PHY_CNTL, BGMAC_PC_MTE);
bgmac_miiconfig(bgmac);
bgmac_phy_init(bgmac);
netdev_reset_queue(bgmac->net_dev);
}