void SysResetThread(void *arg)
{
UINT8 gpio_val;
int i;
Agent_config_t pConfigData;
while (1)
{
if (system_reset_flag == 0x12345678)
{
gpio_val = BSP_GPIOGetValue(USER_GPIO_RESET_BUTTON);
if (gpio_val == USER_RESET_BUTTON_PRESS) {
for (i = 0; i < USER_RESET_PRESS_TIMEOUT; i++) {
OSTimeDly(50); /* delay 500ms filter button shake */
gpio_val = BSP_GPIOGetValue(USER_GPIO_RESET_BUTTON);
if (gpio_val != USER_RESET_BUTTON_PRESS) {
break;
}
}
if (i == USER_RESET_PRESS_TIMEOUT) {
memcpy(&pConfigData, &Agent_config_data, sizeof(Agent_config_t));
pConfigData.flag = 0;
memset(pConfigData.wifi_ssid, 0x0, sizeof(pConfigData.wifi_ssid));
memset(pConfigData.wifi_key, 0x0, sizeof(pConfigData.wifi_key));
nl6621_SaveConfigData(&pConfigData);
/* reset module */
log_warn("RESET button press more than 4 seconds, reseting System.\n");
OSTimeDly(100);
nl6621_Reset();
}
}
}
OSTimeDly(100);
}
}
/*
* === FUNCTION ======================================================================
* Name: Agent_network_init
* Description: Initialize agent system system connection status.
* Note: This interface will check the gpio 10 level, when it was press, then
* set to DirectConfig mode, else change gpio to reset button.
* =====================================================================================
*/
void Agent_network_init(void)
{
UINT8 gpio_val;
int ret = 0;
/* DirectConfig gpio is valied when set to low level */
BSP_GPIOPinMux(USER_GPIO_DIRECTCONFIG);
BSP_GPIOSetDir(USER_GPIO_DIRECTCONFIG, GPIO_DIRECTION_INPUT);
Yeelink_Init();
/* if the Directconfig button was pressed(gpio is low level), then set to Directconfig
* mode.
* */
gpio_val = BSP_GPIOGetValue(USER_GPIO_DIRECTCONFIG);
if (gpio_val == 0) {
OSTimeDly(20); /* delay 200ms, filter button shake */
gpio_val = BSP_GPIOGetValue(USER_GPIO_DIRECTCONFIG);
if (gpio_val == 0) {
/* Set system status */
sys_status.status = SYS_STATUS_WIFI_DIRECTCONFING;
/* Directconfig mode */
ret = StartDirectConfigConn();
if (ret == 0) {
/* Set system to STA mode */
sys_status.status = SYS_STATUS_WIFI_STA_CONNECTED;
Agent_reset_init();
return;
}
}
}
/* If directconfig function is not triggered, initialize device reset function */
Agent_reset_init();
/* Start the Wifi connection, setup AP or Station mode according to last connection
* status store in nor flash. Otherwise, switch to softap mode if connected AP
* failed in station mode.
* */
if (nl6621_GetConfigData(&Agent_config_data) != 0) {
log_info("Get GAgentConfig Data error.\n");
}
//测试用
//调试用的
#define wifissid "NUFRONT-test03"//"nu2.4"
#define wifikey "nufront.iopjklbnm" //"google.com.k"
Agent_config_data.flag |= XPG_CFG_FLAG_CONNECTED;
memcpy(Agent_config_data.wifi_ssid,wifissid,strlen(wifissid));
Agent_config_data.wifi_ssid[strlen(wifissid)] = 0;
memcpy(Agent_config_data.wifi_key,wifikey,strlen(wifikey));
Agent_config_data.wifi_key[strlen(wifikey)] = 0;
//测试用
if ((Agent_config_data.flag & XPG_CFG_FLAG_CONNECTED) == XPG_CFG_FLAG_CONNECTED) {
/* setup station mode */
sys_status.status = SYS_STATUS_WIFI_DIRECTCONFING;
ret = DRV_WiFi_StaModeConnStart(Agent_config_data.wifi_ssid, Agent_config_data.wifi_key, 1);
if (ret != 0) { /* switch to softAP mode */
goto SOFTAP;
}
sys_status.status = SYS_STATUS_WIFI_STA_CONNECTED;
} else {
/* setup softap mode */
SOFTAP:
log_info("Device Working at AP mode\r\n");
DRV_WiFi_SoftAPModeStart();
sys_status.status = SYS_STATUS_WIFI_SOFTAP;
}
return;
}
/*
* === FUNCTION ======================================================================
* Name: GAgent_SetDevNetWork
* Description: Start to connect to a network when used DirectConfig mode or STA mode,
* otherwise, Create a network with AP mode.
* Note: This interface will check the gpio 10 level, when it was press, then
* set to DirectConfig mode, else read flag from norflash, and judge launch
* SoftAP mode or STA mode.
* =====================================================================================
*/
void GAgent_SetDevNetWork(void)
{
UINT8 gpio_val;
/* if the Directconfig button was pressed(gpio is low level), then set to Directconfig
* mode.
* */
gpio_val = BSP_GPIOGetValue(USER_GPIO_DIRECTCONFIG);
if (gpio_val == 0) {
OSTimeDly(20); /* delay 200ms filter button shake */
gpio_val = BSP_GPIOGetValue(USER_GPIO_DIRECTCONFIG);
if (gpio_val == 0) {
/* Set system to directConfig status */
sys_status.status = SYS_STATUS_WIFI_DIRECTCONFING;
/* Launch directconfig mode */
TestDirectConfig();
g_stGAgentConfigData.flag |= XPG_CFG_FLAG_CONNECTED;
nl6621_SaveConfigData(&g_stGAgentConfigData);
wifiStatus = wifiStatus | WIFI_STATION_STATUS | WIFI_MODE_STATION;
/* Set system to STA mode */
sys_status.status = SYS_STATUS_WIFI_STA_CONNECTED;
return;
}
}
if (nl6621_GetConfigData(&g_stGAgentConfigData) != 0) {
log_info("Get GAgentConfig Data error.\n");
}
/* 启动Wifi连接，根据是否获得保存数据, 决定使用AP或者Station模式
* */
if ((g_stGAgentConfigData.flag & XPG_CFG_FLAG_CONNECTED) == XPG_CFG_FLAG_CONNECTED) { //flash 里面有要加入的网络名称
/* Set system to STA status */
sys_status.status = SYS_STATUS_WIFI_DIRECTCONFING;
wifiStatus |= WIFI_STATION_STATUS | WIFI_MODE_STATION;
log_info("Try to connect wifi...[%08x]\n", g_stGAgentConfigData.flag);
log_info("SSID: %s\n", g_stGAgentConfigData.wifi_ssid);
log_info("KEY: %s\n", g_stGAgentConfigData.wifi_key);
DRV_WiFi_StationCustomModeStart(g_stGAgentConfigData.wifi_ssid, g_stGAgentConfigData.wifi_key);
if (wifi_sta_connect_ap_flag != 0) { /* switch to softAP mode */
goto SOFTAP;
}
/* Set system status to STA mode */
sys_status.status = SYS_STATUS_WIFI_STA_CONNECTED;
} else {
SOFTAP:
wifiStatus = WIFI_MODE_AP;
log_info("Connect2LateWiFi, Working at AP mode\r\n");
DRV_WiFi_SoftAPModeStart();
/* Set system status to STA mode */
sys_status.status = SYS_STATUS_WIFI_SOFTAP;
}
return;
}
