int FLASHPlugin_DoProgramSync(unsigned startOffset, const void *pData, int bytesToWrite)
{
uint8_t result = BSP_QSPI_Write((uint8_t *)pData, startOffset, bytesToWrite);
if (result != QSPI_OK)
return 0;
return bytesToWrite;
}
/**
* @brief QSPI Demo
* @param None
* @retval None
*/
void QSPI_demo (void)
{
uint8_t status;
QSPI_SetHint();
/*##-1- Configure the QSPI device ##########################################*/
/* QSPI device configuration */
status = BSP_QSPI_Init();
if (status == QSPI_NOT_SUPPORTED)
{
BSP_LCD_DisplayStringAt(20, 100, (uint8_t*)"QSPI Initialization : FAILED.", LEFT_MODE);
BSP_LCD_DisplayStringAt(20, 115, (uint8_t*)"QSPI Test Aborted.", LEFT_MODE);
BSP_LCD_DisplayStringAt(20, 145, (uint8_t*)"Check the hardware configuration :", LEFT_MODE);
BSP_LCD_DisplayStringAt(20, 160, (uint8_t*)" refer to the UM of the board", LEFT_MODE);
BSP_LCD_DisplayStringAt(20, 175, (uint8_t*)" for the hardware modifications", LEFT_MODE);
BSP_LCD_DisplayStringAt(20, 190, (uint8_t*)" to connect the QSPI memory", LEFT_MODE);
}
else if (status == QSPI_ERROR)
{
BSP_LCD_DisplayStringAt(20, 100, (uint8_t*)"QSPI Initialization : FAILED.", LEFT_MODE);
BSP_LCD_DisplayStringAt(20, 115, (uint8_t*)"QSPI Test Aborted.", LEFT_MODE);
}
else
{
BSP_LCD_DisplayStringAt(20, 100, (uint8_t*)"QSPI Initialization : OK.", LEFT_MODE);
/*##-2- Read & check the QSPI info #######################################*/
/* Clear the structure */
QspiInfo.FlashSize = (uint32_t)0x00;
QspiInfo.EraseSectorSize = (uint32_t)0x00;
QspiInfo.EraseSectorsNumber = (uint32_t)0x00;
QspiInfo.ProgPageSize = (uint32_t)0x00;
QspiInfo.ProgPagesNumber = (uint32_t)0x00;
QspiInfo.ManufID = (uint8_t)0x00;
/* Read the QSPI memory info by filling QSPIInfo struct */
BSP_QSPI_GetInfo(&QspiInfo);
/* Test the correctness */
if (CompareInfo() !=QSPI_OK)
{
BSP_LCD_DisplayStringAt(20, 115, (uint8_t*)"QSPI GET INFO : FAILED.", LEFT_MODE);
BSP_LCD_DisplayStringAt(20, 130, (uint8_t*)"QSPI Test Aborted.", LEFT_MODE);
}
else
{
if (QspiInfo.ManufID == QSPI_S25FL512S)
{
BSP_LCD_DisplayStringAt(20, 115, (uint8_t*)"QSPI GET INFO : OK. S25FL512S detected ", LEFT_MODE);
} else
{
BSP_LCD_DisplayStringAt(20, 115, (uint8_t*)"QSPI GET INFO : OK. N25Q512A detected ", LEFT_MODE);
}
/*##-3- Erase QSPI memory ################################################*/
if(BSP_QSPI_Erase_Block(WRITE_READ_ADDR) != QSPI_OK)
{
BSP_LCD_DisplayStringAt(20, 130, (uint8_t*)"QSPI ERASE : FAILED.", LEFT_MODE);
BSP_LCD_DisplayStringAt(20, 145, (uint8_t*)"QSPI Test Aborted.", LEFT_MODE);
}
else
{
BSP_LCD_DisplayStringAt(20, 130, (uint8_t*)"QSPI ERASE : OK. ", LEFT_MODE);
/*##-4- QSPI memory read/write access #################################*/
/* Fill the buffer to write */
Fill_Buffer(qspi_aTxBuffer, BUFFER_SIZE, 0xD20F);
/* Write data to the QSPI memory */
if(BSP_QSPI_Write(qspi_aTxBuffer, WRITE_READ_ADDR, BUFFER_SIZE) != QSPI_OK)
{
BSP_LCD_DisplayStringAt(20, 145, (uint8_t*)"QSPI WRITE : FAILED.", LEFT_MODE);
BSP_LCD_DisplayStringAt(20, 160, (uint8_t*)"QSPI Test Aborted.", LEFT_MODE);
}
else
{
BSP_LCD_DisplayStringAt(20, 145, (uint8_t*)"QSPI WRITE : OK. ", LEFT_MODE);
/* Read back data from the QSPI memory */
if(BSP_QSPI_Read(qspi_aRxBuffer, WRITE_READ_ADDR, BUFFER_SIZE) != QSPI_OK)
{
BSP_LCD_DisplayStringAt(20, 160, (uint8_t*)"QSPI READ : FAILED.", LEFT_MODE);
BSP_LCD_DisplayStringAt(20, 175, (uint8_t*)"QSPI Test Aborted.", LEFT_MODE);
}
else
{
BSP_LCD_DisplayStringAt(20, 160, (uint8_t*)"QSPI READ : OK. ", LEFT_MODE);
/*##-5- Checking data integrity ############################################*/
if(Buffercmp(qspi_aRxBuffer, qspi_aTxBuffer, BUFFER_SIZE) > 0)
{
BSP_LCD_DisplayStringAt(20, 175, (uint8_t*)"QSPI COMPARE : FAILED.", LEFT_MODE);
BSP_LCD_DisplayStringAt(20, 190, (uint8_t*)"QSPI Test Aborted.", LEFT_MODE);
}
else
{
BSP_LCD_DisplayStringAt(20, 175, (uint8_t*)"QSPI Test : OK. ", LEFT_MODE);
}
}
}
}
}
}
while (1)
{
if(CheckForUserInput() > 0)
{
return;
}
}
}
