void CContextWeather::ButtonDown(UINT usGpioFlag, UINT usEventEnum)
{
DBGMSGC(DBG_WEATHER, "++\r\n");
if(usEventEnum == MTM_GPIO_BUTTON_DOWN)
{
}
else if(usEventEnum == MTM_GPIO_BUTTON_LONG)
{
if( CHK_FLAG(usGpioFlag, BIT_FLAG(GPIO_FRONT_RIGHT_TOP)|BIT_FLAG(GPIO_FRONT_RIGHT_BOTTOM)) ||
CHK_FLAG(usGpioFlag, BIT_FLAG(GPIO_REAR_VOL_UP)|BIT_FLAG(GPIO_REAR_VOL_DOWN)) )
{
if (!CHK_FLAG(usGpioFlag, BIT_FLAG(GPIO_FRONT_RIGHT_MIDDLE))) {
GrUnmapWindow(m_wid_ment);
//Ment Scroll Window 영역이 까맣게 보이는 증상이 있어서 배경으로 다시 덮어줌
RedrawImage(g_wid, g_gc, MENT_AREA_X, MENT_AREA_Y, MENT_AREA_WIDTH, MENT_AREA_HEIGHT,
MENT_AREA_X, MENT_AREA_Y, MENT_AREA_WIDTH, MENT_AREA_HEIGHT, WEATHER_OBJ_BG);
g_state.ChangeState(STATE_SETUP);
}
}
}
DBGMSGC(DBG_WEATHER, "--\r\n");
}
static cl_int printDI_DeviceType(cl_device_id did, cl_device_info info)
{
assert( info == CL_DEVICE_TYPE);
cl_device_type devType=0;
cl_int err;
err = clGetDeviceInfo(did,
info,
sizeof(devType),
&devType,
0);
if ( err != CL_SUCCESS)
{
printf("Couldn't get device info.");
return err;
}
// Now handle flags
#define CHK_FLAG(A) if ( devType & A ) printf(#A " ")
CHK_FLAG(CL_DEVICE_TYPE_CPU);
CHK_FLAG(CL_DEVICE_TYPE_GPU);
CHK_FLAG(CL_DEVICE_TYPE_ACCELERATOR);
CHK_FLAG(CL_DEVICE_TYPE_DEFAULT);
#ifdef CL_VERSION_1_2
CHK_FLAG(CL_DEVICE_TYPE_CUSTOM);
#endif
#undef CHK_FLAG
return CL_SUCCESS;
}
void CContextLight::ButtonDown(UINT usGpioFlag, UINT usEventEnum)
{
DBGMSGC(DBG_LIGHT, "++\r\n");
if(usEventEnum == MTM_GPIO_BUTTON_DOWN)
{
}
else if(usEventEnum == MTM_GPIO_BUTTON_LONG)
{
#if 0
if( CHK_FLAG(usGpioFlag, BIT_FLAG(GPIO_FRONT_RIGHT_TOP)|BIT_FLAG(GPIO_FRONT_RIGHT_BOTTOM)) ||
CHK_FLAG(usGpioFlag, BIT_FLAG(GPIO_REAR_VOL_UP)|BIT_FLAG(GPIO_REAR_VOL_DOWN)) )
{
g_state.ChangeState(STATE_SETUP);
}
#endif
}
DBGMSGC(DBG_LIGHT, "--\r\n");
}
void CContextAllOff::ButtonDown(UINT usGpioFlag, UINT usEventEnum)
{
printf("+CContextAllOff::ButtonDown\r\n");
if(usEventEnum == MTM_GPIO_BUTTON_DOWN)
{
}
else if(usEventEnum == MTM_GPIO_BUTTON_LONG)
{
#if 0
if( CHK_FLAG(usGpioFlag, FLAG(GPIO_FRONT_RIGHT_TOP)|FLAG(GPIO_FRONT_RIGHT_BOTTOM)) ||
CHK_FLAG(usGpioFlag, FLAG(GPIO_REAR_VOL_UP)|FLAG(GPIO_REAR_VOL_DOWN)) )
{
g_state.SetNextState(STATE_SETUP);
}
#endif
}
printf("-CContextAllOff::ButtonDown\r\n");
}
static cl_int printDI_FPflag(cl_device_id did, cl_device_info info)
{
assert( ( info == CL_DEVICE_SINGLE_FP_CONFIG ||
info == CL_DEVICE_DOUBLE_FP_CONFIG ) &&
"Invalid cl_device_info passed.");
cl_int err;
cl_device_fp_config fpConfig;
err = clGetDeviceInfo( did,
info,
sizeof(fpConfig),
&fpConfig,
0
);
if ( err != CL_SUCCESS )
{
printf("Could not get floating point information");
return err;
}
// Handle flags
#define CHK_FLAG(A) if (fpConfig & A) printf(#A " ")
CHK_FLAG(CL_FP_DENORM);
CHK_FLAG(CL_FP_INF_NAN);
CHK_FLAG(CL_FP_ROUND_TO_NEAREST);
CHK_FLAG(CL_FP_ROUND_TO_ZERO);
CHK_FLAG(CL_FP_ROUND_TO_INF);
CHK_FLAG(CL_FP_FMA);
CHK_FLAG(CL_FP_SOFT_FLOAT);
#ifdef CL_VERSION_1_2
if ( info == CL_DEVICE_SINGLE_FP_CONFIG )
{
CHK_FLAG(CL_FP_CORRECTLY_ROUNDED_DIVIDE_SQRT);
}
#endif
#undef CHK_FLAG
return CL_SUCCESS;
}
//주차위치정보요청
void CWallPadKcm::RequestParkingInfo()
{
KCM_PACKET packet = {0,};
if( (m_packet.opcode != KCM_OP_BATCH_REQ) && !CHK_FLAG(m_packet.data[0], KCM_BATCH_REQ_PARKING) )
{
m_nRetry = 0;
}
if(m_nRetry < 3)
{
packet.preamble = KCM_PRE;
packet.hd = KCM_HD;
packet.cc = KCM_CC_ACK_IS | m_nRetry++;
packet.pcnt = 0;
packet.adh = KCM_DEV_WALLPAD; //0x01
packet.adl = 0;
packet.ash = KCM_DEV_MTM; //0x53
packet.asl = 0;
packet.opcode = KCM_OP_BATCH_REQ; //0x00
packet.data[0] = KCM_BATCH_REQ_PARKING; //0x02
packet.fcc = CalcCheckSum((UCHAR *)&packet.hd, 16);
packet.eot = KCM_EOT;
if(Write((UCHAR*)&packet, sizeof(KCM_PACKET)) > 0)
{
g_timer.SetTimer(RESPONSE_TIMER, 1, NULL, "Response Timer");
}
}
else
{
m_nRetry = 0;
g_timer.KillTimer(RESPONSE_TIMER);
g_message.SendMessage(MSG_TIMER_EVENT, RETRY_TIMEOUT);
}
}
