Exemple #1
0
/** Run a specified suite within the curses interface.
 * @param pSuite The suite to be run (non-NULL).
 * @return An error code indicating the error status
 *         during the test run.
 */
static CU_ErrorCode curses_run_suite_tests(CU_pSuite pSuite)
{
  reset_run_parameters();
  f_uiTotalTests = pSuite->uiNumberOfTests;
  f_uiTotalSuites = 1;
  return CU_run_suite(pSuite);
}
int bc_tester_run_tests(const char *suite_name, const char *test_name) {
	int i;

	/* initialize the CUnit test registry */
	if (CUE_SUCCESS != CU_initialize_registry())
		return CU_get_error();

	for (i = 0; i < nb_test_suites; i++) {
		bc_tester_run_suite(test_suite[i]);
	}
#ifdef HAVE_CU_GET_SUITE
	CU_set_suite_start_handler(suite_start_message_handler);
	CU_set_suite_complete_handler(suite_complete_message_handler);
	CU_set_test_start_handler(test_start_message_handler);
	CU_set_test_complete_handler(test_complete_message_handler);
#endif
	CU_set_all_test_complete_handler(all_complete_message_handler);
	CU_set_suite_init_failure_handler(suite_init_failure_message_handler);
	CU_set_suite_cleanup_failure_handler(suite_cleanup_failure_message_handler);

	if( xml_enabled != 0 ){
		CU_automated_run_tests();
	} else {

#ifndef HAVE_CU_GET_SUITE
		if( suite_name ){
			bc_tester_printf(bc_printf_verbosity_info, "Tester compiled without CU_get_suite() function, running all tests instead of suite '%s'", suite_name);
		}
#else
		if (suite_name){
			CU_pSuite suite;
			suite=CU_get_suite(suite_name);
			if (!suite) {
				bc_tester_printf(bc_printf_verbosity_error, "Could not find suite '%s'. Available suites are:", suite_name);
				bc_tester_list_suites();
				return -1;
			} else if (test_name) {
				CU_pTest test=CU_get_test_by_name(test_name, suite);
				if (!test) {
					bc_tester_printf(bc_printf_verbosity_error, "Could not find test '%s' in suite '%s'. Available tests are:", test_name, suite_name);
					// do not use suite_name here, since this method is case sensitive
					bc_tester_list_tests(suite->pName);
					return -2;
				} else {
					CU_ErrorCode err= CU_run_test(suite, test);
					if (err != CUE_SUCCESS) bc_tester_printf(bc_printf_verbosity_error, "CU_basic_run_test error %d", err);
				}
			} else {
				CU_run_suite(suite);
			}
		}
		else
#endif
		{
#ifdef HAVE_CU_CURSES
			if (curses) {
			/* Run tests using the CUnit curses interface */
				CU_curses_run_tests();
			}
			else
#endif
			{
				/* Run all tests using the CUnit Basic interface */
				CU_run_all_tests();
			}
		}
	}
#ifdef __linux
	bc_tester_printf(bc_printf_verbosity_info, "Still %i kilobytes allocated when all tests are finished.",
					 mallinfo().uordblks / 1024);
#endif

	return CU_get_number_of_tests_failed()!=0;

}
Exemple #3
0
int liblinphone_tester_run_tests(const char *suite_name, const char *test_name) {
	int i;
	int ret;
	/* initialize the CUnit test registry */
	if (CUE_SUCCESS != CU_initialize_registry())
		return CU_get_error();

	for (i = 0; i < liblinphone_tester_nb_test_suites(); i++) {
		run_test_suite(test_suite[i]);
	}

	CU_set_test_start_handler(test_start_message_handler);
	CU_set_test_complete_handler(test_complete_message_handler);
	CU_set_all_test_complete_handler(test_all_tests_complete_message_handler);
	CU_set_suite_init_failure_handler(test_suite_init_failure_message_handler);
	CU_set_suite_cleanup_failure_handler(test_suite_cleanup_failure_message_handler);
	CU_set_suite_start_handler(test_suite_start_message_handler);


	if( liblinphone_tester_xml_file != NULL ){
		CU_set_output_filename(liblinphone_tester_xml_file);
	}
	if( liblinphone_tester_xml_enabled != 0 ){
		CU_automated_run_tests();
	} else {

#if !HAVE_CU_GET_SUITE
		if( suite_name ){
			ms_warning("Tester compiled without CU_get_suite() function, running all tests instead of suite '%s'\n", suite_name);
		}
#else
		if (suite_name){
			CU_pSuite suite;
			suite=CU_get_suite(suite_name);
			if (!suite) {
				ms_error("Could not find suite '%s'. Available suites are:", suite_name);
				liblinphone_tester_list_suites();
				return -1;
			} else if (test_name) {
				CU_pTest test=CU_get_test_by_name(test_name, suite);
				if (!test) {
					ms_error("Could not find test '%s' in suite '%s'. Available tests are:", test_name, suite_name);
					// do not use suite_name here, since this method is case sensitive
					liblinphone_tester_list_suite_tests(suite->pName);
					return -2;
				} else {
					CU_ErrorCode err= CU_run_test(suite, test);
					if (err != CUE_SUCCESS) ms_error("CU_basic_run_test error %d", err);
				}
			} else {
				CU_run_suite(suite);
			}
		}
		else
#endif
		{
#if HAVE_CU_CURSES
			if (curses) {
				/* Run tests using the CUnit curses interface */
				CU_curses_run_tests();
			}
			else
#endif
			{
				/* Run all tests using the CUnit Basic interface */
				CU_run_all_tests();
			}
		}

	}
	ret=CU_get_number_of_tests_failed()!=0;

	/* Redisplay list of failed tests on end */
	if (CU_get_number_of_failure_records()){
		CU_basic_show_failures(CU_get_failure_list());
		liblinphone_tester_fprintf(stdout,"\n");
	}

	CU_cleanup_registry();

	if( liblinphone_tester_keep_accounts_flag == 0){
		liblinphone_tester_clear_accounts();
	}
	return ret;
}
Exemple #4
0
/** Runs a specified suite within the basic interface.
 *  @param pSuite The suite to be run (non-NULL).
 *  @return An error code indicating the error status
 *          during the test run.
 */
static CU_ErrorCode basic_run_suite(CU_pSuite pSuite)
{
  f_pRunningSuite = NULL;
  return CU_run_suite(pSuite);
}
Exemple #5
0
/*
** The main() function for setting up and running the tests.
** Returns a CUE_SUCCESS on successful running, another
** CUnit error code on failure.
*/
int main(int argc, char *argv[])
{
	int index;
	char *suite_name;
	CU_pSuite suite_to_run;
	char *test_name;
	CU_pTest test_to_run;
	CU_ErrorCode errCode = 0;
	CU_pTestRegistry registry;
	int num_run;
	int num_failed;
	PG_SuiteSetup *setupfunc = setupfuncs;

	/* Install the custom error handler */
	lwgeom_set_handlers(0, 0, 0, cu_errorreporter, 0);

	/* Initialize the CUnit test registry */
	if (CUE_SUCCESS != CU_initialize_registry())
	{
		errCode = CU_get_error();
		printf("    Error attempting to initialize registry: %d.  See CUError.h for error code list.\n", errCode);
		return errCode;
	}

	/* Register all the test suites. */
	while ( *setupfunc )
	{
		(*setupfunc)();
		setupfunc++;
	}

	/* Run all tests using the CUnit Basic interface */
	CU_basic_set_mode(CU_BRM_VERBOSE);
	if (argc <= 1)
	{
		errCode = CU_basic_run_tests();
	}
	else
	{
		/* NOTE: The cunit functions used here (CU_get_registry, CU_get_suite_by_name, and CU_get_test_by_name) are
		 *       listed with the following warning: "Internal CUnit system functions.  Should not be routinely called by users."
		 *       However, there didn't seem to be any other way to get tests by name, so we're calling them. */
		registry = CU_get_registry();
		for (index = 1; index < argc; index++)
		{
			suite_name = argv[index];
			test_name = NULL;
			suite_to_run = CU_get_suite_by_name(suite_name, registry);
			if (NULL == suite_to_run)
			{
				/* See if it's a test name instead of a suite name. */
				suite_to_run = registry->pSuite;
				while (suite_to_run != NULL)
				{
					test_to_run = CU_get_test_by_name(suite_name, suite_to_run);
					if (test_to_run != NULL)
					{
						/* It was a test name. */
						test_name = suite_name;
						suite_name = suite_to_run->pName;
						break;
					}
					suite_to_run = suite_to_run->pNext;
				}
			}
			if (suite_to_run == NULL)
			{
				printf("\n'%s' does not appear to be either a suite name or a test name.\n\n", suite_name);
			}
			else
			{
				if (test_name != NULL)
				{
					/* Run only this test. */
					printf("\nRunning test '%s' in suite '%s'.\n", test_name, suite_name);
					/* This should be CU_basic_run_test, but that method is broken, see:
					 *     https://sourceforge.net/tracker/?func=detail&aid=2851925&group_id=32992&atid=407088
					 * This one doesn't output anything for success, so we have to do it manually. */
					errCode = CU_run_test(suite_to_run, test_to_run);
					if (errCode != CUE_SUCCESS)
					{
						printf("    Error attempting to run tests: %d.  See CUError.h for error code list.\n", errCode);
					}
					else
					{
						num_run = CU_get_number_of_asserts();
						num_failed = CU_get_number_of_failures();
						printf("\n    %s - asserts - %3d passed, %3d failed, %3d total.\n\n",
						       (0 == num_failed ? "PASSED" : "FAILED"), (num_run - num_failed), num_failed, num_run);
					}
				}
				else
				{
					/* Run all the tests in the suite. */
					printf("\nRunning all tests in suite '%s'.\n", suite_name);
					/* This should be CU_basic_run_suite, but that method is broken, see:
					 *     https://sourceforge.net/tracker/?func=detail&aid=2851925&group_id=32992&atid=407088
					 * This one doesn't output anything for success, so we have to do it manually. */
					errCode = CU_run_suite(suite_to_run);
					if (errCode != CUE_SUCCESS)
					{
						printf("    Error attempting to run tests: %d.  See CUError.h for error code list.\n", errCode);
					}
					else
					{
						num_run = CU_get_number_of_tests_run();
						num_failed = CU_get_number_of_tests_failed();
						printf("\n    %s -   tests - %3d passed, %3d failed, %3d total.\n",
						       (0 == num_failed ? "PASSED" : "FAILED"), (num_run - num_failed), num_failed, num_run);
						num_run = CU_get_number_of_asserts();
						num_failed = CU_get_number_of_failures();
						printf("           - asserts - %3d passed, %3d failed, %3d total.\n\n",
						       (num_run - num_failed), num_failed, num_run);
					}
				}
			}
		}
		/* Presumably if the CU_basic_run_[test|suite] functions worked, we wouldn't have to do this. */
		CU_basic_show_failures(CU_get_failure_list());
		printf("\n\n"); /* basic_show_failures leaves off line breaks. */
	}
	num_failed = CU_get_number_of_failures();
	CU_cleanup_registry();
	return num_failed;
}