/* Transmit a byte array through the UART peripheral (blocking) */
int Chip_UART_SendBlocking(LPC_USART_T *pUART, const void *data, int numBytes)
{
int pass, sent = 0;
uint8_t *p8 = (uint8_t *) data;
while (numBytes > 0) {
pass = Chip_UART_Send(pUART, p8, numBytes);
numBytes -= pass;
sent += pass;
p8 += pass;
}
return sent;
}
/* UCOM bulk EP_IN and EP_OUT endpoints handler */
static ErrorCode_t UCOM_bulk_hdlr(USBD_HANDLE_T hUsb, void *data, uint32_t event)
{
UCOM_DATA_T *pUcom = (UCOM_DATA_T *) data;
uint32_t count = 0;
switch (event) {
/* A transfer from us to the USB host that we queued has completed. */
case USB_EVT_IN:
/* check if UART had more data to send */
if (pUcom->rxBuf_uartIndex < pUcom->rxBuf_usbIndex) {
count = UCOM_BUF_SZ - pUcom->rxBuf_usbIndex;
}
else {
count = pUcom->rxBuf_uartIndex - pUcom->rxBuf_usbIndex;
}
if (count) {
pUcom->usbTxBusy = 1;
count = USBD_API->hw->WriteEP(pUcom->hUsb, USB_CDC_IN_EP, &pUcom->rxBuf[g_uCOM.rxBuf_usbIndex], count);
g_uCOM.rxBuf_usbIndex = (g_uCOM.rxBuf_usbIndex + count) & (UCOM_BUF_SZ - 1);
}
else {
pUcom->usbTxBusy = 0;
}
break;
/* We received a transfer from the USB host . */
case USB_EVT_OUT:
if ((Chip_UART_GetIntsEnabled(LPC_USART) & UART_IER_THREINT) == 0) {
pUcom->txBuf_count = USBD_API->hw->ReadEP(hUsb, USB_CDC_OUT_EP, pUcom->txBuf);
pUcom->txBuf_uartIndex = 0;
/* kick start UART tranmission */
pUcom->txBuf_uartIndex = Chip_UART_Send(LPC_USART,
&pUcom->txBuf[g_uCOM.txBuf_uartIndex],
pUcom->txBuf_count);
pUcom->txBuf_count -= pUcom->txBuf_uartIndex;
/* Enable UART transmit interrupt */
Chip_UART_IntEnable(LPC_USART, UART_IER_THREINT);
}
else {
pUcom->usbRxPending++;
}
break;
default:
break;
}
return LPC_OK;
}
/**
* @brief UART interrupt handler sub-routine
* @return Nothing
*/
void UART_IRQHandler(void)
{
uint32_t count = 0;
/* Handle transmit interrupt if enabled */
if (LPC_USART->IER & UART_IER_THREINT) {
if (g_uCOM.txBuf_count > 0) {
count = Chip_UART_Send(LPC_USART, &g_uCOM.txBuf[g_uCOM.txBuf_uartIndex], g_uCOM.txBuf_count);
g_uCOM.txBuf_count -= count;
g_uCOM.txBuf_uartIndex += count;
}
/* If usbRxBuf empty check if any packet pending USB EP RAM */
if (g_uCOM.txBuf_count < 1) {
if (g_uCOM.usbRxPending > 0) {
g_uCOM.usbRxPending--;
g_uCOM.txBuf_count = USBD_API->hw->ReadEP(g_uCOM.hUsb, USB_CDC_OUT_EP, g_uCOM.txBuf);
g_uCOM.txBuf_uartIndex = 0;
}
else {
/* all data transmitted on UART disable UART_IER_THREINT */
Chip_UART_IntDisable(LPC_USART, UART_IER_THREINT);
}
}
}
/* Handle receive interrupt */
count = Chip_UART_Read(LPC_USART, &g_uCOM.rxBuf[g_uCOM.rxBuf_uartIndex], UCOM_BUF_SZ - g_uCOM.rxBuf_uartIndex);
if (count) {
/* Note, following logic works if UCOM_BUF_SZ is 2^n size only. */
g_uCOM.rxBuf_uartIndex = (g_uCOM.rxBuf_uartIndex + count) & (UCOM_BUF_SZ - 1);
/* If USB Tx is not busy kick start USB Tx */
if (g_uCOM.usbTxBusy == 0) {
g_uCOM.usbTxBusy = 1;
count = USBD_API->hw->WriteEP(g_uCOM.hUsb, USB_CDC_IN_EP, &g_uCOM.rxBuf[g_uCOM.rxBuf_usbIndex], count);
g_uCOM.rxBuf_usbIndex = (g_uCOM.rxBuf_usbIndex + count) & (UCOM_BUF_SZ - 1);
}
}
}
void UART_IRQHandler(UCOM_DATA_T *pUcom )
{
uint32_t count = 0;
/* Handle transmit interrupt if enabled */
if (pUcom->selected->IER & UART_IER_THREINT) {
if (pUcom->txBuf_count > 0) {
count = Chip_UART_Send(pUcom->selected, &pUcom->txBuf[pUcom->txBuf_uartIndex], pUcom->txBuf_count);
pUcom->txBuf_count -= count;
pUcom->txBuf_uartIndex += count;
}
/* If usbRxBuf empty check if any packet pending USB EP RAM */
if (pUcom->txBuf_count < 1) {
if ((pUcom->usbRxPending > 0) && USB_IsConfigured(pUcom->hUsb)) {
pUcom->usbRxPending--;
pUcom->txBuf_count = USBD_API->hw->ReadEP(pUcom->hUsb, pUcom->outEndpoint, pUcom->txBuf);
pUcom->txBuf_uartIndex = 0;
}
else {
/* all data transmitted on UART disable UART_IER_THREINT */
Chip_UART_IntDisable(pUcom->selected, UART_IER_THREINT);
}
}
}
/* Handle receive interrupt */
count = Chip_UART_Read(pUcom->selected, &pUcom->rxBuf[pUcom->rxBuf_uartIndex], UCOM_BUF_SZ - pUcom->rxBuf_uartIndex);
if (count) {
/* Note, following logic works if UCOM_BUF_SZ is 2^n size only. */
pUcom->rxBuf_uartIndex = (pUcom->rxBuf_uartIndex + count) & (UCOM_BUF_SZ - 1);
/* If USB Tx is not busy kick start USB Tx */
if ((pUcom->usbTxBusy == 0) && USB_IsConfigured(pUcom->hUsb)) {
pUcom->usbTxBusy = 1;
count = USBD_API->hw->WriteEP(pUcom->hUsb, pUcom->inEndpoint, &pUcom->rxBuf[pUcom->rxBuf_usbIndex], count);
pUcom->rxBuf_usbIndex = (pUcom->rxBuf_usbIndex + count) & (UCOM_BUF_SZ - 1);
}
}
}
static ErrorCode_t UCOM_bulk_hdlrOutGeneric(USBD_HANDLE_T hUsb, void *data, uint32_t event)
{
UCOM_DATA_T *pUcom = (UCOM_DATA_T *) data;
switch (event) {
case USB_EVT_OUT:
if(pUcom->selected!=0){
if ((Chip_UART_GetIntsEnabled(pUcom->selected) & UART_IER_THREINT) == 0) {
pUcom->txBuf_count = USBD_API->hw->ReadEP(hUsb, pUcom->outEndpoint, pUcom->txBuf);
pUcom->txBuf_uartIndex = 0;
/* kick start UART tranmission */
pUcom->txBuf_uartIndex = Chip_UART_Send(pUcom->selected,
&pUcom->txBuf[pUcom->txBuf_uartIndex],
pUcom->txBuf_count);
pUcom->txBuf_count -= pUcom->txBuf_uartIndex;
/* Enable UART transmit interrupt */
Chip_UART_IntEnable(pUcom->selected, UART_IER_THREINT);
}
else {
pUcom->usbRxPending++;
}
return LPC_OK;
}
break;
break;
default:
break;
}
return ERR_USBD_UNHANDLED;
}
/**
* @brief Main UART program body
* @return Always returns -1
*/
int main(void)
{
FlagStatus exitflag;
uint8_t buffer[10];
int ret = 0;
uint32_t len;
/* UART FIFO configuration Struct variable */
UART_FIFO_CFG_T UARTFIFOConfigStruct;
/* Auto baudrate configuration structure */
UART_AB_CFG_T ABConfig;
Board_Init();
Board_UART_Init(LPC_UART);
//#if (UARTNum != 0)
Chip_UART_Init(LPC_UART);
Chip_UART_SetBaud(LPC_UART, 115200);
Chip_UART_ConfigData(LPC_UART, UART_DATABIT_8, UART_PARITY_NONE, UART_STOPBIT_1); /* Default 8-N-1 */
/* Enable UART Transmit */
Chip_UART_TxCmd(LPC_UART, ENABLE);
//#endif
Chip_UART_Send(LPC_UART, "F**K OFF\n",10, BLOCKING);
Chip_UART_FIFOConfigStructInit(LPC_UART, &UARTFIFOConfigStruct);
/* Enable DMA mode in UART */
UARTFIFOConfigStruct.FIFO_DMAMode = ENABLE;
/* Initialize FIFO for UART0 peripheral */
Chip_UART_FIFOConfig(LPC_UART, &UARTFIFOConfigStruct);
/* Enable UART End of Auto baudrate interrupt */
Chip_UART_IntConfig(LPC_UART, UART_INTCFG_ABEO, ENABLE);
/* Enable UART Auto baudrate timeout interrupt */
Chip_UART_IntConfig(LPC_UART, UART_INTCFG_ABTO, ENABLE);
/* preemption = 1, sub-priority = 1 */
NVIC_SetPriority(UARTx_IRQn, 1);
/* Enable Interrupt for UART0 channel */
NVIC_EnableIRQ(UARTx_IRQn);
// /* ---------------------- Auto baud rate section ----------------------- */
// /* Configure Auto baud rate mode */
// ABConfig.ABMode = UART_AUTOBAUD_MODE0;
// ABConfig.AutoRestart = ENABLE;
//
// /* Start auto baudrate mode */
// Chip_UART_ABCmd(LPC_UART, &ABConfig, ENABLE);
//
//
// /* Loop until auto baudrate mode complete */
// while (Chip_UART_GetABEOStatus(LPC_UART) == RESET) {}
//
// Chip_UART_Send(LPC_UART, uartABComplete, sizeof(uartABComplete), BLOCKING);
/* Disable UART Interrupt */
NVIC_DisableIRQ(UARTx_IRQn);
/* Print welcome screen */
Print_Menu_Polling();
exitflag = RESET;
/* Read some data from the buffer */
while (exitflag == RESET) {
len = 0;
while (len == 0) {
len = Chip_UART_Receive(LPC_UART, buffer, 1, NONE_BLOCKING);
}
if (buffer[0] == 27) {
/* ESC key, set exit flag */
Chip_UART_Send(LPC_UART, uartPolling_menu3, sizeof(uartPolling_menu3), BLOCKING);
ret = -1;
exitflag = SET;
}
else if (buffer[0] == 'c') {
Chip_UART_Send(LPC_UART, uartPolling_menu4, sizeof(uartPolling_menu4), BLOCKING);
len = 0;
while (len == 0) {
len = Chip_UART_Receive(LPC_UART, buffer, sizeof(buffer), NONE_BLOCKING);
if ((buffer[0] != '1') && (buffer[0] != '2') && (buffer[0] != '3')) {
len = 0;
}
}
switch (buffer[0]) {
case '1': /* Polling Mode */
Chip_UART_Send(LPC_UART, uartPolling_menu5, sizeof(uartPolling_menu5), BLOCKING);
break;
case '2': /* Interrupt Mode */
ret = 2;
/* Exitflag = SET; */
App_Interrupt_Test();
Print_Menu_Polling();
break;
case '3': /* DMA mode */
ret = 3;
App_DMA_Test();
Print_Menu_Polling();
break;
}
}
}
/* Wait for current transmission complete - THR must be empty */
while (Chip_UART_CheckBusy(LPC_UART) == SET) {}
/* DeInitialize UART0 peripheral */
Chip_UART_DeInit(LPC_UART);
return ret;
}
/* Print Welcome menu by Polling mode */
static void Print_Menu_Polling(void)
{
Chip_UART_Send(LPC_UART, uartPolling_menu1, sizeof(uartPolling_menu1), BLOCKING);
Chip_UART_Send(LPC_UART, uartPolling_menu2, sizeof(uartPolling_menu2), BLOCKING);
Chip_UART_Send(LPC_UART, uartPolling_menu5, sizeof(uartPolling_menu5), BLOCKING);
}
platform_result_t platform_uart_transmit_bytes( platform_uart_driver_t* driver, const uint8_t* data_out, uint32_t size )
{
Chip_UART_Send(driver->interface->uart_base, (uint8_t *)data_out,(int)size, BLOCKING);
return WICED_SUCCESS;
}
/* UART transmit function for interrupt mode (using ring buffers) */
uint32_t Chip_UART_Interrupt_Transmit(LPC_USART_Type *UARTx, uint8_t *txbuf, uint8_t buflen)
{
uint8_t *data = (uint8_t *) txbuf;
uint32_t bytes = 0;
/* Temporarily lock out UART transmit interrupts during this
read so the UART transmit interrupt won't cause problems
with the index values */
Chip_UART_IntConfig(UARTx, UART_INTCFG_THRE, DISABLE);
/* Loop until transmit run buffer is full or until n_bytes
expires */
while ((buflen > 0) && (!__BUF_IS_FULL(rb.tx_head, rb.tx_tail))) {
/* Write data from buffer into ring buffer */
rb.tx[rb.tx_head] = *data;
data++;
/* Increment head pointer */
__BUF_INCR(rb.tx_head);
/* Increment data count and decrement buffer size count */
bytes++;
buflen--;
}
/*
* Check if current Tx interrupt enable is reset,
* that means the Tx interrupt must be re-enabled
* due to call UART_IntTransmit() function to trigger
* this interrupt type
*/
if (TxIntStat == RESET) {
// Disable THRE interrupt
Chip_UART_IntConfig(UARTx, UART_INTCFG_THRE, DISABLE);
/* Wait for FIFO buffer empty, transfer UART_TX_FIFO_SIZE bytes
* of data or break whenever ring buffers are empty */
/* Wait until THR empty */
while (Chip_UART_CheckBusy(UARTx) == SET) ;
while (!__BUF_IS_EMPTY(rb.tx_head, rb.tx_tail)) {
/* Move a piece of data into the transmit FIFO */
if (Chip_UART_Send(UARTx, (uint8_t *) &rb.tx[rb.tx_tail], 1, NONE_BLOCKING)) {
/* Update transmit ring FIFO tail pointer */
__BUF_INCR(rb.tx_tail);
}
else {
break;
}
}
/* If there is no more data to send, disable the transmit
interrupt - else enable it or keep it enabled */
if (__BUF_IS_EMPTY(rb.tx_head, rb.tx_tail)) {
Chip_UART_IntConfig(UARTx, UART_INTCFG_THRE, DISABLE);
/* Reset Tx Interrupt state */
TxIntStat = RESET;
}
else {
/* Set Tx Interrupt state */
TxIntStat = SET;
Chip_UART_IntConfig(UARTx, UART_INTCFG_THRE, ENABLE);
}
}
/*
* Otherwise, re-enables Tx Interrupt
*/
else {
Chip_UART_IntConfig(UARTx, UART_INTCFG_THRE, ENABLE);
}
return bytes;
}
/* UART interrupt service routine */
void Chip_UART_Interrupt_Handler(LPC_USART_Type *UARTx)
{
uint8_t tmpc;
uint32_t rLen;
UART_INT_STATUS_Type Sts = Chip_UART_GetIntStatus(UARTx);
if (Sts == UART_INTSTS_ERROR) {
return; /* error */
}
if (Sts & UART_INTSTS_RTR) { /* ready for Read Data */
while (1) {
/* Call UART read function in UART driver */
rLen = Chip_UART_Receive(UARTx, &tmpc, 1, NONE_BLOCKING);
/* If data received */
if (rLen) {
/* Check if buffer is more space
* If no more space, remaining character will be trimmed out
*/
if (!__BUF_IS_FULL(rb.rx_head, rb.rx_tail)) {
rb.rx[rb.rx_head] = tmpc;
__BUF_INCR(rb.rx_head);
}
}
/* no more data */
else {
break;
}
}
}
if (Sts & UART_INTSTS_RTS) { /* ready for Write Data */
/* Disable THRE interrupt */
Chip_UART_IntConfig(UARTx, UART_INTCFG_THRE, DISABLE);
/* Wait for FIFO buffer empty, transfer UART_TX_FIFO_SIZE bytes
* of data or break whenever ring buffers are empty */
/* Wait until THR empty */
while (Chip_UART_CheckBusy(UARTx) == SET) ;
while (!__BUF_IS_EMPTY(rb.tx_head, rb.tx_tail)) {
/* Move a piece of data into the transmit FIFO */
if (Chip_UART_Send(UARTx, (uint8_t *) &rb.tx[rb.tx_tail], 1, NONE_BLOCKING)) {
/* Update transmit ring FIFO tail pointer */
__BUF_INCR(rb.tx_tail);
}
else {
break;
}
}
/* If there is no more data to send, disable the transmit
interrupt - else enable it or keep it enabled */
if (__BUF_IS_EMPTY(rb.tx_head, rb.tx_tail)) {
Chip_UART_IntConfig(UARTx, UART_INTCFG_THRE, DISABLE);
// Reset Tx Interrupt state
TxIntStat = RESET;
}
else {
/* Set Tx Interrupt state */
TxIntStat = SET;
Chip_UART_IntConfig(UARTx, UART_INTCFG_THRE, ENABLE);
}
}
if(Sts & UART_INTSTS_ABEO)
Chip_UART_ABClearIntPending(UARTx, UART_INTSTS_ABEO);
if (Sts & UART_INTSTS_ABTO)
Chip_UART_ABClearIntPending(UARTx, UART_INTSTS_ABTO);
if (ABsyncSts == RESET)
{
/* Interrupt caused by End of auto-baud */
if (Sts & UART_INTSTS_ABEO){
// Disable AB interrupt
Chip_UART_IntConfig(UARTx, UART_INTCFG_ABEO, DISABLE);
// Set Sync flag
ABsyncSts = SET;
}
/* Auto-Baudrate Time-Out interrupt (not implemented) */
if (Sts & UART_INTSTS_ABTO) {
/* Disable this interrupt - Add your code here */
Chip_UART_IntConfig(UARTx, UART_INTCFG_ABTO, DISABLE);
}
}
}
